linux/drivers/i2c/busses/i2c-pca-isa.c
Uwe Kleine-König 30e88d017f isa: Make the remove callback for isa drivers return void
The driver core ignores the return value of the remove callback, so
don't give isa drivers the chance to provide a value.

Adapt all isa_drivers with a remove callbacks accordingly; they all
return 0 unconditionally anyhow.

Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> # for drivers/net/can/sja1000/tscan1.c
Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com>
Acked-by: Wolfram Sang <wsa@kernel.org> # for drivers/i2c/
Reviewed-by: Takashi Iway <tiwai@suse.de> # for sound/
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for drivers/media/
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210122092449.426097-4-uwe@kleine-koenig.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
2021-01-26 07:42:27 +01:00

202 lines
4.6 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* i2c-pca-isa.c driver for PCA9564 on ISA boards
* Copyright (C) 2004 Arcom Control Systems
* Copyright (C) 2008 Pengutronix
*/
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/delay.h>
#include <linux/jiffies.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/wait.h>
#include <linux/isa.h>
#include <linux/i2c.h>
#include <linux/i2c-algo-pca.h>
#include <linux/io.h>
#include <asm/irq.h>
#define DRIVER "i2c-pca-isa"
#define IO_SIZE 4
static unsigned long base;
static int irq = -1;
/* Data sheet recommends 59kHz for 100kHz operation due to variation
* in the actual clock rate */
static int clock = 59000;
static struct i2c_adapter pca_isa_ops;
static wait_queue_head_t pca_wait;
static void pca_isa_writebyte(void *pd, int reg, int val)
{
#ifdef DEBUG_IO
static char *names[] = { "T/O", "DAT", "ADR", "CON" };
printk(KERN_DEBUG "*** write %s at %#lx <= %#04x\n", names[reg],
base+reg, val);
#endif
outb(val, base+reg);
}
static int pca_isa_readbyte(void *pd, int reg)
{
int res = inb(base+reg);
#ifdef DEBUG_IO
{
static char *names[] = { "STA", "DAT", "ADR", "CON" };
printk(KERN_DEBUG "*** read %s => %#04x\n", names[reg], res);
}
#endif
return res;
}
static int pca_isa_waitforcompletion(void *pd)
{
unsigned long timeout;
long ret;
if (irq > -1) {
ret = wait_event_timeout(pca_wait,
pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI, pca_isa_ops.timeout);
} else {
/* Do polling */
timeout = jiffies + pca_isa_ops.timeout;
do {
ret = time_before(jiffies, timeout);
if (pca_isa_readbyte(pd, I2C_PCA_CON)
& I2C_PCA_CON_SI)
break;
udelay(100);
} while (ret);
}
return ret > 0;
}
static void pca_isa_resetchip(void *pd)
{
/* apparently only an external reset will do it. not a lot can be done */
printk(KERN_WARNING DRIVER ": Haven't figured out how to do a reset yet\n");
}
static irqreturn_t pca_handler(int this_irq, void *dev_id) {
wake_up(&pca_wait);
return IRQ_HANDLED;
}
static struct i2c_algo_pca_data pca_isa_data = {
/* .data intentionally left NULL, not needed with ISA */
.write_byte = pca_isa_writebyte,
.read_byte = pca_isa_readbyte,
.wait_for_completion = pca_isa_waitforcompletion,
.reset_chip = pca_isa_resetchip,
};
static struct i2c_adapter pca_isa_ops = {
.owner = THIS_MODULE,
.algo_data = &pca_isa_data,
.name = "PCA9564/PCA9665 ISA Adapter",
.timeout = HZ,
};
static int pca_isa_match(struct device *dev, unsigned int id)
{
int match = base != 0;
if (match) {
if (irq <= -1)
dev_warn(dev, "Using polling mode (specify irq)\n");
} else
dev_err(dev, "Please specify I/O base\n");
return match;
}
static int pca_isa_probe(struct device *dev, unsigned int id)
{
init_waitqueue_head(&pca_wait);
dev_info(dev, "i/o base %#08lx. irq %d\n", base, irq);
#ifdef CONFIG_PPC
if (check_legacy_ioport(base)) {
dev_err(dev, "I/O address %#08lx is not available\n", base);
goto out;
}
#endif
if (!request_region(base, IO_SIZE, "i2c-pca-isa")) {
dev_err(dev, "I/O address %#08lx is in use\n", base);
goto out;
}
if (irq > -1) {
if (request_irq(irq, pca_handler, 0, "i2c-pca-isa", &pca_isa_ops) < 0) {
dev_err(dev, "Request irq%d failed\n", irq);
goto out_region;
}
}
pca_isa_data.i2c_clock = clock;
if (i2c_pca_add_bus(&pca_isa_ops) < 0) {
dev_err(dev, "Failed to add i2c bus\n");
goto out_irq;
}
return 0;
out_irq:
if (irq > -1)
free_irq(irq, &pca_isa_ops);
out_region:
release_region(base, IO_SIZE);
out:
return -ENODEV;
}
static void pca_isa_remove(struct device *dev, unsigned int id)
{
i2c_del_adapter(&pca_isa_ops);
if (irq > -1) {
disable_irq(irq);
free_irq(irq, &pca_isa_ops);
}
release_region(base, IO_SIZE);
}
static struct isa_driver pca_isa_driver = {
.match = pca_isa_match,
.probe = pca_isa_probe,
.remove = pca_isa_remove,
.driver = {
.owner = THIS_MODULE,
.name = DRIVER,
}
};
MODULE_AUTHOR("Ian Campbell <icampbell@arcom.com>");
MODULE_DESCRIPTION("ISA base PCA9564/PCA9665 driver");
MODULE_LICENSE("GPL");
module_param_hw(base, ulong, ioport, 0);
MODULE_PARM_DESC(base, "I/O base address");
module_param_hw(irq, int, irq, 0);
MODULE_PARM_DESC(irq, "IRQ");
module_param(clock, int, 0);
MODULE_PARM_DESC(clock, "Clock rate in hertz.\n\t\t"
"For PCA9564: 330000,288000,217000,146000,"
"88000,59000,44000,36000\n"
"\t\tFor PCA9665:\tStandard: 60300 - 100099\n"
"\t\t\t\tFast: 100100 - 400099\n"
"\t\t\t\tFast+: 400100 - 10000099\n"
"\t\t\t\tTurbo: Up to 1265800");
module_isa_driver(pca_isa_driver, 1);