linux/drivers/pci/pci-acpi.c
Shaohua Li 5fde244d39 PCI: disable ASPM per ACPI FADT setting
The ACPI FADT table includes an ASPM control bit. If the bit is set, do
not enable ASPM since it may indicate that the platform doesn't actually
support the feature.

Tested-by: Jack Howarth <howarth@bromo.msbb.uc.edu>
Signed-off-by: Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28 14:56:09 -07:00

389 lines
9.9 KiB
C

/*
* File: pci-acpi.c
* Purpose: Provide PCI support in ACPI
*
* Copyright (C) 2005 David Shaohua Li <shaohua.li@intel.com>
* Copyright (C) 2004 Tom Long Nguyen <tom.l.nguyen@intel.com>
* Copyright (C) 2004 Intel Corp.
*/
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/module.h>
#include <linux/pci-aspm.h>
#include <acpi/acpi.h>
#include <acpi/acnamesp.h>
#include <acpi/acresrc.h>
#include <acpi/acpi_bus.h>
#include <linux/pci-acpi.h>
#include "pci.h"
struct acpi_osc_data {
acpi_handle handle;
u32 support_set;
u32 control_set;
int is_queried;
u32 query_result;
struct list_head sibiling;
};
static LIST_HEAD(acpi_osc_data_list);
struct acpi_osc_args {
u32 capbuf[3];
u32 query_result;
};
static struct acpi_osc_data *acpi_get_osc_data(acpi_handle handle)
{
struct acpi_osc_data *data;
list_for_each_entry(data, &acpi_osc_data_list, sibiling) {
if (data->handle == handle)
return data;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (!data)
return NULL;
INIT_LIST_HEAD(&data->sibiling);
data->handle = handle;
list_add_tail(&data->sibiling, &acpi_osc_data_list);
return data;
}
static u8 OSC_UUID[16] = {0x5B, 0x4D, 0xDB, 0x33, 0xF7, 0x1F, 0x1C, 0x40,
0x96, 0x57, 0x74, 0x41, 0xC0, 0x3D, 0xD7, 0x66};
static acpi_status acpi_run_osc(acpi_handle handle,
struct acpi_osc_args *osc_args)
{
acpi_status status;
struct acpi_object_list input;
union acpi_object in_params[4];
struct acpi_buffer output = {ACPI_ALLOCATE_BUFFER, NULL};
union acpi_object *out_obj;
u32 osc_dw0, flags = osc_args->capbuf[OSC_QUERY_TYPE];
/* Setting up input parameters */
input.count = 4;
input.pointer = in_params;
in_params[0].type = ACPI_TYPE_BUFFER;
in_params[0].buffer.length = 16;
in_params[0].buffer.pointer = OSC_UUID;
in_params[1].type = ACPI_TYPE_INTEGER;
in_params[1].integer.value = 1;
in_params[2].type = ACPI_TYPE_INTEGER;
in_params[2].integer.value = 3;
in_params[3].type = ACPI_TYPE_BUFFER;
in_params[3].buffer.length = 12;
in_params[3].buffer.pointer = (u8 *)osc_args->capbuf;
status = acpi_evaluate_object(handle, "_OSC", &input, &output);
if (ACPI_FAILURE(status))
return status;
out_obj = output.pointer;
if (out_obj->type != ACPI_TYPE_BUFFER) {
printk(KERN_DEBUG "Evaluate _OSC returns wrong type\n");
status = AE_TYPE;
goto out_kfree;
}
osc_dw0 = *((u32 *)out_obj->buffer.pointer);
if (osc_dw0) {
if (osc_dw0 & OSC_REQUEST_ERROR)
printk(KERN_DEBUG "_OSC request fails\n");
if (osc_dw0 & OSC_INVALID_UUID_ERROR)
printk(KERN_DEBUG "_OSC invalid UUID\n");
if (osc_dw0 & OSC_INVALID_REVISION_ERROR)
printk(KERN_DEBUG "_OSC invalid revision\n");
if (osc_dw0 & OSC_CAPABILITIES_MASK_ERROR) {
if (flags & OSC_QUERY_ENABLE)
goto out_success;
printk(KERN_DEBUG "_OSC FW not grant req. control\n");
status = AE_SUPPORT;
goto out_kfree;
}
status = AE_ERROR;
goto out_kfree;
}
out_success:
if (flags & OSC_QUERY_ENABLE)
osc_args->query_result =
*((u32 *)(out_obj->buffer.pointer + 8));
status = AE_OK;
out_kfree:
kfree(output.pointer);
return status;
}
static acpi_status acpi_query_osc(acpi_handle handle,
u32 level, void *context, void **retval)
{
acpi_status status;
struct acpi_osc_data *osc_data;
u32 flags = (unsigned long)context, support_set;
acpi_handle tmp;
struct acpi_osc_args osc_args;
status = acpi_get_handle(handle, "_OSC", &tmp);
if (ACPI_FAILURE(status))
return status;
osc_data = acpi_get_osc_data(handle);
if (!osc_data) {
printk(KERN_ERR "acpi osc data array is full\n");
return AE_ERROR;
}
/* do _OSC query for all possible controls */
support_set = osc_data->support_set | (flags & OSC_SUPPORT_MASKS);
osc_args.capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE;
osc_args.capbuf[OSC_SUPPORT_TYPE] = support_set;
osc_args.capbuf[OSC_CONTROL_TYPE] = OSC_CONTROL_MASKS;
status = acpi_run_osc(handle, &osc_args);
if (ACPI_SUCCESS(status)) {
osc_data->support_set = support_set;
osc_data->query_result = osc_args.query_result;
osc_data->is_queried = 1;
}
return status;
}
/**
* __pci_osc_support_set - register OS support to Firmware
* @flags: OS support bits
* @hid: hardware ID
*
* Update OS support fields and doing a _OSC Query to obtain an update
* from Firmware on supported control bits.
**/
acpi_status __pci_osc_support_set(u32 flags, const char *hid)
{
if (!(flags & OSC_SUPPORT_MASKS))
return AE_TYPE;
acpi_get_devices(hid, acpi_query_osc,
(void *)(unsigned long)flags, NULL);
return AE_OK;
}
/**
* pci_osc_control_set - commit requested control to Firmware
* @handle: acpi_handle for the target ACPI object
* @flags: driver's requested control bits
*
* Attempt to take control from Firmware on requested control bits.
**/
acpi_status pci_osc_control_set(acpi_handle handle, u32 flags)
{
acpi_status status;
u32 ctrlset, control_set;
acpi_handle tmp;
struct acpi_osc_data *osc_data;
struct acpi_osc_args osc_args;
status = acpi_get_handle(handle, "_OSC", &tmp);
if (ACPI_FAILURE(status))
return status;
osc_data = acpi_get_osc_data(handle);
if (!osc_data) {
printk(KERN_ERR "acpi osc data array is full\n");
return AE_ERROR;
}
ctrlset = (flags & OSC_CONTROL_MASKS);
if (!ctrlset)
return AE_TYPE;
if (osc_data->is_queried &&
((osc_data->query_result & ctrlset) != ctrlset))
return AE_SUPPORT;
control_set = osc_data->control_set | ctrlset;
osc_args.capbuf[OSC_QUERY_TYPE] = 0;
osc_args.capbuf[OSC_SUPPORT_TYPE] = osc_data->support_set;
osc_args.capbuf[OSC_CONTROL_TYPE] = control_set;
status = acpi_run_osc(handle, &osc_args);
if (ACPI_SUCCESS(status))
osc_data->control_set = control_set;
return status;
}
EXPORT_SYMBOL(pci_osc_control_set);
/*
* _SxD returns the D-state with the highest power
* (lowest D-state number) supported in the S-state "x".
*
* If the devices does not have a _PRW
* (Power Resources for Wake) supporting system wakeup from "x"
* then the OS is free to choose a lower power (higher number
* D-state) than the return value from _SxD.
*
* But if _PRW is enabled at S-state "x", the OS
* must not choose a power lower than _SxD --
* unless the device has an _SxW method specifying
* the lowest power (highest D-state number) the device
* may enter while still able to wake the system.
*
* ie. depending on global OS policy:
*
* if (_PRW at S-state x)
* choose from highest power _SxD to lowest power _SxW
* else // no _PRW at S-state x
* choose highest power _SxD or any lower power
*/
static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev)
{
int acpi_state;
acpi_state = acpi_pm_device_sleep_state(&pdev->dev, NULL);
if (acpi_state < 0)
return PCI_POWER_ERROR;
switch (acpi_state) {
case ACPI_STATE_D0:
return PCI_D0;
case ACPI_STATE_D1:
return PCI_D1;
case ACPI_STATE_D2:
return PCI_D2;
case ACPI_STATE_D3:
return PCI_D3hot;
}
return PCI_POWER_ERROR;
}
static bool acpi_pci_power_manageable(struct pci_dev *dev)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
return handle ? acpi_bus_power_manageable(handle) : false;
}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
acpi_handle tmp;
static const u8 state_conv[] = {
[PCI_D0] = ACPI_STATE_D0,
[PCI_D1] = ACPI_STATE_D1,
[PCI_D2] = ACPI_STATE_D2,
[PCI_D3hot] = ACPI_STATE_D3,
[PCI_D3cold] = ACPI_STATE_D3
};
int error = -EINVAL;
/* If the ACPI device has _EJ0, ignore the device */
if (!handle || ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
return -ENODEV;
switch (state) {
case PCI_D0:
case PCI_D1:
case PCI_D2:
case PCI_D3hot:
case PCI_D3cold:
error = acpi_bus_set_power(handle, state_conv[state]);
}
if (!error)
dev_printk(KERN_INFO, &dev->dev,
"power state changed by ACPI to D%d\n", state);
return error;
}
static bool acpi_pci_can_wakeup(struct pci_dev *dev)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
return handle ? acpi_bus_can_wakeup(handle) : false;
}
static int acpi_pci_sleep_wake(struct pci_dev *dev, bool enable)
{
int error = acpi_pm_device_sleep_wake(&dev->dev, enable);
if (!error)
dev_printk(KERN_INFO, &dev->dev,
"wake-up capability %s by ACPI\n",
enable ? "enabled" : "disabled");
return error;
}
static struct pci_platform_pm_ops acpi_pci_platform_pm = {
.is_manageable = acpi_pci_power_manageable,
.set_state = acpi_pci_set_power_state,
.choose_state = acpi_pci_choose_state,
.can_wakeup = acpi_pci_can_wakeup,
.sleep_wake = acpi_pci_sleep_wake,
};
/* ACPI bus type */
static int acpi_pci_find_device(struct device *dev, acpi_handle *handle)
{
struct pci_dev * pci_dev;
acpi_integer addr;
pci_dev = to_pci_dev(dev);
/* Please ref to ACPI spec for the syntax of _ADR */
addr = (PCI_SLOT(pci_dev->devfn) << 16) | PCI_FUNC(pci_dev->devfn);
*handle = acpi_get_child(DEVICE_ACPI_HANDLE(dev->parent), addr);
if (!*handle)
return -ENODEV;
return 0;
}
static int acpi_pci_find_root_bridge(struct device *dev, acpi_handle *handle)
{
int num;
unsigned int seg, bus;
/*
* The string should be the same as root bridge's name
* Please look at 'pci_scan_bus_parented'
*/
num = sscanf(dev->bus_id, "pci%04x:%02x", &seg, &bus);
if (num != 2)
return -ENODEV;
*handle = acpi_get_pci_rootbridge_handle(seg, bus);
if (!*handle)
return -ENODEV;
return 0;
}
static struct acpi_bus_type acpi_pci_bus = {
.bus = &pci_bus_type,
.find_device = acpi_pci_find_device,
.find_bridge = acpi_pci_find_root_bridge,
};
static int __init acpi_pci_init(void)
{
int ret;
if (acpi_gbl_FADT.boot_flags & BAF_MSI_NOT_SUPPORTED) {
printk(KERN_INFO"ACPI FADT declares the system doesn't support MSI, so disable it\n");
pci_no_msi();
}
if (acpi_gbl_FADT.boot_flags & BAF_PCIE_ASPM_CONTROL) {
printk(KERN_INFO"ACPI FADT declares the system doesn't support PCIe ASPM, so disable it\n");
pcie_no_aspm();
}
ret = register_acpi_bus_type(&acpi_pci_bus);
if (ret)
return 0;
pci_set_platform_pm(&acpi_pci_platform_pm);
return 0;
}
arch_initcall(acpi_pci_init);