Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-17 09:31:50 +00:00
Code Issues Packages Projects Releases Wiki Activity
7998eb3dc7
linux/arch/frv/kernel/setup.c
Paul Gortmaker ec460ae52e frv: delete __cpuinit usage from all frv files 
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

Note that some harmless section mismatch warnings may result, since
notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c)
are flagged as __cpuinit  -- so if we remove the __cpuinit from
arch specific callers, we will also get section mismatch warnings.
As an intermediate step, we intend to turn the linux/init.h cpuinit
content into no-ops as early as possible, since that will get rid
of these warnings.  In any case, they are temporary and harmless.

This removes all the arch/frv uses of the __cpuinit macros from
all C files.  Currently frv does not have any __CPUINIT used in
assembly files.

[1] https://lkml.org/lkml/2013/5/20/589

Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:55 -04:00

1181 lines
32 KiB
C
Raw Blame History

/* setup.c: FRV specific setup
*
* Copyright (C) 2003-5 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
* - Derived from arch/m68k/kernel/setup.c
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#include <generated/utsrelease.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/fb.h>
#include <linux/console.h>
#include <linux/genhd.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/major.h>
#include <linux/bootmem.h>
#include <linux/highmem.h>
#include <linux/seq_file.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/serial_reg.h>
#include <linux/serial_8250.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/sections.h>
#include <asm/pgalloc.h>
#include <asm/busctl-regs.h>
#include <asm/serial-regs.h>
#include <asm/timer-regs.h>
#include <asm/irc-regs.h>
#include <asm/spr-regs.h>
#include <asm/mb-regs.h>
#include <asm/mb93493-regs.h>
#include <asm/gdb-stub.h>
#include <asm/io.h>
#ifdef CONFIG_BLK_DEV_INITRD
#include <asm/pgtable.h>
#endif
#include "local.h"
#ifdef CONFIG_MB93090_MB00
static void __init mb93090_display(void);
#endif
#ifdef CONFIG_MMU
static void __init setup_linux_memory(void);
#else
static void __init setup_uclinux_memory(void);
#endif
#ifdef CONFIG_MB93090_MB00
static char __initdata mb93090_banner[] = "FJ/RH FR-V Linux";
static char __initdata mb93090_version[] = UTS_RELEASE;
int __nongprelbss mb93090_mb00_detected;
#endif
const char __frv_unknown_system[] = "unknown";
const char __frv_mb93091_cb10[] = "mb93091-cb10";
const char __frv_mb93091_cb11[] = "mb93091-cb11";
const char __frv_mb93091_cb30[] = "mb93091-cb30";
const char __frv_mb93091_cb41[] = "mb93091-cb41";
const char __frv_mb93091_cb60[] = "mb93091-cb60";
const char __frv_mb93091_cb70[] = "mb93091-cb70";
const char __frv_mb93091_cb451[] = "mb93091-cb451";
const char __frv_mb93090_mb00[] = "mb93090-mb00";
const char __frv_mb93493[] = "mb93493";
const char __frv_mb93093[] = "mb93093";
static const char *__nongprelbss cpu_series;
static const char *__nongprelbss cpu_core;
static const char *__nongprelbss cpu_silicon;
static const char *__nongprelbss cpu_mmu;
static const char *__nongprelbss cpu_system;
static const char *__nongprelbss cpu_board1;
static const char *__nongprelbss cpu_board2;
static unsigned long __nongprelbss cpu_psr_all;
static unsigned long __nongprelbss cpu_hsr0_all;
unsigned long __nongprelbss pdm_suspend_mode;
unsigned long __nongprelbss rom_length;
unsigned long __nongprelbss memory_start;
unsigned long __nongprelbss memory_end;
unsigned long __nongprelbss dma_coherent_mem_start;
unsigned long __nongprelbss dma_coherent_mem_end;
unsigned long __initdata __sdram_old_base;
unsigned long __initdata num_mappedpages;
struct cpuinfo_frv __nongprelbss boot_cpu_data;
char __initdata command_line[COMMAND_LINE_SIZE];
char __initdata redboot_command_line[COMMAND_LINE_SIZE];
#ifdef CONFIG_PM
#define __pminit
#define __pminitdata
#define __pminitconst
#else
#define __pminit __init
#define __pminitdata __initdata
#define __pminitconst __initconst
#endif
struct clock_cmode {
uint8_t xbus, sdram, corebus, core, dsu;
};
#define _frac(N,D) ((N)<<4 | (D))
#define _x0_16 _frac(1,6)
#define _x0_25 _frac(1,4)
#define _x0_33 _frac(1,3)
#define _x0_375 _frac(3,8)
#define _x0_5 _frac(1,2)
#define _x0_66 _frac(2,3)
#define _x0_75 _frac(3,4)
#define _x1 _frac(1,1)
#define _x1_5 _frac(3,2)
#define _x2 _frac(2,1)
#define _x3 _frac(3,1)
#define _x4 _frac(4,1)
#define _x4_5 _frac(9,2)
#define _x6 _frac(6,1)
#define _x8 _frac(8,1)
#define _x9 _frac(9,1)
int __nongprelbss clock_p0_current;
int __nongprelbss clock_cm_current;
int __nongprelbss clock_cmode_current;
#ifdef CONFIG_PM
int __nongprelbss clock_cmodes_permitted;
unsigned long __nongprelbss clock_bits_settable;
#endif
static struct clock_cmode __pminitdata undef_clock_cmode = { _x1, _x1, _x1, _x1, _x1 };
static struct clock_cmode __pminitdata clock_cmodes_fr401_fr403[16] = {
[4] = { _x1, _x1, _x2, _x2, _x0_25 },
[5] = { _x1, _x2, _x4, _x4, _x0_5 },
[8] = { _x1, _x1, _x1, _x2, _x0_25 },
[9] = { _x1, _x2, _x2, _x4, _x0_5 },
[11] = { _x1, _x4, _x4, _x8, _x1 },
[12] = { _x1, _x1, _x2, _x4, _x0_5 },
[13] = { _x1, _x2, _x4, _x8, _x1 },
};
static struct clock_cmode __pminitdata clock_cmodes_fr405[16] = {
[0] = { _x1, _x1, _x1, _x1, _x0_5 },
[1] = { _x1, _x1, _x1, _x3, _x0_25 },
[2] = { _x1, _x1, _x2, _x6, _x0_5 },
[3] = { _x1, _x2, _x2, _x6, _x0_5 },
[4] = { _x1, _x1, _x2, _x2, _x0_16 },
[8] = { _x1, _x1, _x1, _x2, _x0_16 },
[9] = { _x1, _x2, _x2, _x4, _x0_33 },
[12] = { _x1, _x1, _x2, _x4, _x0_33 },
[14] = { _x1, _x3, _x3, _x9, _x0_75 },
[15] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 },
#define CLOCK_CMODES_PERMITTED_FR405 0xd31f
};
static struct clock_cmode __pminitdata clock_cmodes_fr555[16] = {
[0] = { _x1, _x2, _x2, _x4, _x0_33 },
[1] = { _x1, _x3, _x3, _x6, _x0_5 },
[2] = { _x1, _x2, _x4, _x8, _x0_66 },
[3] = { _x1, _x1_5, _x3, _x6, _x0_5 },
[4] = { _x1, _x3, _x3, _x9, _x0_75 },
[5] = { _x1, _x2, _x2, _x6, _x0_5 },
[6] = { _x1, _x1_5, _x1_5, _x4_5, _x0_375 },
};
static const struct clock_cmode __pminitconst *clock_cmodes;
static int __pminitdata clock_doubled;
static struct uart_port __pminitdata __frv_uart0 = {
.uartclk = 0,
.membase = (char *) UART0_BASE,
.irq = IRQ_CPU_UART0,
.regshift = 3,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
};
static struct uart_port __pminitdata __frv_uart1 = {
.uartclk = 0,
.membase = (char *) UART1_BASE,
.irq = IRQ_CPU_UART1,
.regshift = 3,
.iotype = UPIO_MEM,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
};
#if 0
static void __init printk_xampr(unsigned long ampr, unsigned long amlr, char i_d, int n)
{
unsigned long phys, virt, cxn, size;
#ifdef CONFIG_MMU
virt = amlr & 0xffffc000;
cxn = amlr & 0x3fff;
#else
virt = ampr & 0xffffc000;
cxn = 0;
#endif
phys = ampr & xAMPRx_PPFN;
size = 1 << (((ampr & xAMPRx_SS) >> 4) + 17);
printk("%cAMPR%d: va %08lx-%08lx [pa %08lx] %c%c%c%c [cxn:%04lx]\n",
i_d, n,
virt, virt + size - 1,
phys,
ampr & xAMPRx_S ? 'S' : '-',
ampr & xAMPRx_C ? 'C' : '-',
ampr & DAMPRx_WP ? 'W' : '-',
ampr & xAMPRx_V ? 'V' : '-',
cxn
);
}
#endif
/*****************************************************************************/
/*
* dump the memory map
*/
static void __init dump_memory_map(void)
{
#if 0
/* dump the protection map */
printk_xampr(__get_IAMPR(0), __get_IAMLR(0), 'I', 0);
printk_xampr(__get_IAMPR(1), __get_IAMLR(1), 'I', 1);
printk_xampr(__get_IAMPR(2), __get_IAMLR(2), 'I', 2);
printk_xampr(__get_IAMPR(3), __get_IAMLR(3), 'I', 3);
printk_xampr(__get_IAMPR(4), __get_IAMLR(4), 'I', 4);
printk_xampr(__get_IAMPR(5), __get_IAMLR(5), 'I', 5);
printk_xampr(__get_IAMPR(6), __get_IAMLR(6), 'I', 6);
printk_xampr(__get_IAMPR(7), __get_IAMLR(7), 'I', 7);
printk_xampr(__get_IAMPR(8), __get_IAMLR(8), 'I', 8);
printk_xampr(__get_IAMPR(9), __get_IAMLR(9), 'i', 9);
printk_xampr(__get_IAMPR(10), __get_IAMLR(10), 'I', 10);
printk_xampr(__get_IAMPR(11), __get_IAMLR(11), 'I', 11);
printk_xampr(__get_IAMPR(12), __get_IAMLR(12), 'I', 12);
printk_xampr(__get_IAMPR(13), __get_IAMLR(13), 'I', 13);
printk_xampr(__get_IAMPR(14), __get_IAMLR(14), 'I', 14);
printk_xampr(__get_IAMPR(15), __get_IAMLR(15), 'I', 15);
printk_xampr(__get_DAMPR(0), __get_DAMLR(0), 'D', 0);
printk_xampr(__get_DAMPR(1), __get_DAMLR(1), 'D', 1);
printk_xampr(__get_DAMPR(2), __get_DAMLR(2), 'D', 2);
printk_xampr(__get_DAMPR(3), __get_DAMLR(3), 'D', 3);
printk_xampr(__get_DAMPR(4), __get_DAMLR(4), 'D', 4);
printk_xampr(__get_DAMPR(5), __get_DAMLR(5), 'D', 5);
printk_xampr(__get_DAMPR(6), __get_DAMLR(6), 'D', 6);
printk_xampr(__get_DAMPR(7), __get_DAMLR(7), 'D', 7);
printk_xampr(__get_DAMPR(8), __get_DAMLR(8), 'D', 8);
printk_xampr(__get_DAMPR(9), __get_DAMLR(9), 'D', 9);
printk_xampr(__get_DAMPR(10), __get_DAMLR(10), 'D', 10);
printk_xampr(__get_DAMPR(11), __get_DAMLR(11), 'D', 11);
printk_xampr(__get_DAMPR(12), __get_DAMLR(12), 'D', 12);
printk_xampr(__get_DAMPR(13), __get_DAMLR(13), 'D', 13);
printk_xampr(__get_DAMPR(14), __get_DAMLR(14), 'D', 14);
printk_xampr(__get_DAMPR(15), __get_DAMLR(15), 'D', 15);
#endif
#if 0
/* dump the bus controller registers */
printk("LGCR: %08lx\n", __get_LGCR());
printk("Master: %08lx-%08lx CR=%08lx\n",
__get_LEMBR(), __get_LEMBR() + __get_LEMAM(),
__get_LMAICR());
int loop;
for (loop = 1; loop <= 7; loop++) {
unsigned long lcr = __get_LCR(loop), lsbr = __get_LSBR(loop);
printk("CS#%d: %08lx-%08lx %c%c%c%c%c%c%c%c%c\n",
loop,
lsbr, lsbr + __get_LSAM(loop),
lcr & 0x80000000 ? 'r' : '-',
lcr & 0x40000000 ? 'w' : '-',
lcr & 0x08000000 ? 'b' : '-',
lcr & 0x04000000 ? 'B' : '-',
lcr & 0x02000000 ? 'C' : '-',
lcr & 0x01000000 ? 'D' : '-',
lcr & 0x00800000 ? 'W' : '-',
lcr & 0x00400000 ? 'R' : '-',
(lcr & 0x00030000) == 0x00000000 ? '4' :
(lcr & 0x00030000) == 0x00010000 ? '2' :
(lcr & 0x00030000) == 0x00020000 ? '1' :
'-'
);
}
#endif
#if 0
printk("\n");
#endif
} /* end dump_memory_map() */
/*****************************************************************************/
/*
* attempt to detect a VDK motherboard and DAV daughter board on an MB93091 system
*/
#ifdef CONFIG_MB93091_VDK
static void __init detect_mb93091(void)
{
#ifdef CONFIG_MB93090_MB00
/* Detect CB70 without motherboard */
if (!(cpu_system == __frv_mb93091_cb70 && ((*(unsigned short *)0xffc00030) & 0x100))) {
cpu_board1 = __frv_mb93090_mb00;
mb93090_mb00_detected = 1;
}
#endif
#ifdef CONFIG_FUJITSU_MB93493
cpu_board2 = __frv_mb93493;
#endif
} /* end detect_mb93091() */
#endif
/*****************************************************************************/
/*
* determine the CPU type and set appropriate parameters
*
* Family Series CPU Core Silicon Imple Vers
* ----------------------------------------------------------
* FR-V --+-> FR400 --+-> FR401 --+-> MB93401 02 00 [1]
* | | |
* | | +-> MB93401/A 02 01
* | | |
* | | +-> MB93403 02 02
* | |
* | +-> FR405 ----> MB93405 04 00
* |
* +-> FR450 ----> FR451 ----> MB93451 05 00
* |
* +-> FR500 ----> FR501 --+-> MB93501 01 01 [2]
* | |
* | +-> MB93501/A 01 02
* |
* +-> FR550 --+-> FR551 ----> MB93555 03 01
*
* [1] The MB93401 is an obsolete CPU replaced by the MB93401A
* [2] The MB93501 is an obsolete CPU replaced by the MB93501A
*
* Imple is PSR(Processor Status Register)[31:28].
* Vers is PSR(Processor Status Register)[27:24].
*
* A "Silicon" consists of CPU core and some on-chip peripherals.
*/
static void __init determine_cpu(void)
{
unsigned long hsr0 = __get_HSR(0);
unsigned long psr = __get_PSR();
/* work out what selectable services the CPU supports */
__set_PSR(psr | PSR_EM | PSR_EF | PSR_CM | PSR_NEM);
cpu_psr_all = __get_PSR();
__set_PSR(psr);
__set_HSR(0, hsr0 | HSR0_GRLE | HSR0_GRHE | HSR0_FRLE | HSR0_FRHE);
cpu_hsr0_all = __get_HSR(0);
__set_HSR(0, hsr0);
/* derive other service specs from the CPU type */
cpu_series = "unknown";
cpu_core = "unknown";
cpu_silicon = "unknown";
cpu_mmu = "Prot";
cpu_system = __frv_unknown_system;
clock_cmodes = NULL;
clock_doubled = 0;
#ifdef CONFIG_PM
clock_bits_settable = CLOCK_BIT_CM_H | CLOCK_BIT_CM_M | CLOCK_BIT_P0;
#endif
switch (PSR_IMPLE(psr)) {
case PSR_IMPLE_FR401:
cpu_series = "fr400";
cpu_core = "fr401";
pdm_suspend_mode = HSR0_PDM_PLL_RUN;
switch (PSR_VERSION(psr)) {
case PSR_VERSION_FR401_MB93401:
cpu_silicon = "mb93401";
cpu_system = __frv_mb93091_cb10;
clock_cmodes = clock_cmodes_fr401_fr403;
clock_doubled = 1;
break;
case PSR_VERSION_FR401_MB93401A:
cpu_silicon = "mb93401/A";
cpu_system = __frv_mb93091_cb11;
clock_cmodes = clock_cmodes_fr401_fr403;
break;
case PSR_VERSION_FR401_MB93403:
cpu_silicon = "mb93403";
#ifndef CONFIG_MB93093_PDK
cpu_system = __frv_mb93091_cb30;
#else
cpu_system = __frv_mb93093;
#endif
clock_cmodes = clock_cmodes_fr401_fr403;
break;
default:
break;
}
break;
case PSR_IMPLE_FR405:
cpu_series = "fr400";
cpu_core = "fr405";
pdm_suspend_mode = HSR0_PDM_PLL_STOP;
switch (PSR_VERSION(psr)) {
case PSR_VERSION_FR405_MB93405:
cpu_silicon = "mb93405";
cpu_system = __frv_mb93091_cb60;
clock_cmodes = clock_cmodes_fr405;
#ifdef CONFIG_PM
clock_bits_settable |= CLOCK_BIT_CMODE;
clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
#endif
/* the FPGA on the CB70 has extra registers
* - it has 0x0046 in the VDK_ID FPGA register at 0x1a0, which is
* how we tell the difference between it and a CB60
*/
if (*(volatile unsigned short *) 0xffc001a0 == 0x0046)
cpu_system = __frv_mb93091_cb70;
break;
default:
break;
}
break;
case PSR_IMPLE_FR451:
cpu_series = "fr450";
cpu_core = "fr451";
pdm_suspend_mode = HSR0_PDM_PLL_STOP;
#ifdef CONFIG_PM
clock_bits_settable |= CLOCK_BIT_CMODE;
clock_cmodes_permitted = CLOCK_CMODES_PERMITTED_FR405;
#endif
switch (PSR_VERSION(psr)) {
case PSR_VERSION_FR451_MB93451:
cpu_silicon = "mb93451";
cpu_mmu = "Prot, SAT, xSAT, DAT";
cpu_system = __frv_mb93091_cb451;
clock_cmodes = clock_cmodes_fr405;
break;
default:
break;
}
break;
case PSR_IMPLE_FR501:
cpu_series = "fr500";
cpu_core = "fr501";
pdm_suspend_mode = HSR0_PDM_PLL_STOP;
switch (PSR_VERSION(psr)) {
case PSR_VERSION_FR501_MB93501: cpu_silicon = "mb93501"; break;
case PSR_VERSION_FR501_MB93501A: cpu_silicon = "mb93501/A"; break;
default:
break;
}
break;
case PSR_IMPLE_FR551:
cpu_series = "fr550";
cpu_core = "fr551";
pdm_suspend_mode = HSR0_PDM_PLL_RUN;
switch (PSR_VERSION(psr)) {
case PSR_VERSION_FR551_MB93555:
cpu_silicon = "mb93555";
cpu_mmu = "Prot, SAT";
cpu_system = __frv_mb93091_cb41;
clock_cmodes = clock_cmodes_fr555;
clock_doubled = 1;
break;
default:
break;
}
break;
default:
break;
}
printk("- Series:%s CPU:%s Silicon:%s\n",
cpu_series, cpu_core, cpu_silicon);
#ifdef CONFIG_MB93091_VDK
detect_mb93091();
#endif
#if defined(CONFIG_MB93093_PDK) && defined(CONFIG_FUJITSU_MB93493)
cpu_board2 = __frv_mb93493;
#endif
} /* end determine_cpu() */
/*****************************************************************************/
/*
* calculate the bus clock speed
*/
void __pminit determine_clocks(int verbose)
{
const struct clock_cmode *mode, *tmode;
unsigned long clkc, psr, quot;
clkc = __get_CLKC();
psr = __get_PSR();
clock_p0_current = !!(clkc & CLKC_P0);
clock_cm_current = clkc & CLKC_CM;
clock_cmode_current = (clkc & CLKC_CMODE) >> CLKC_CMODE_s;
if (verbose)
printk("psr=%08lx hsr0=%08lx clkc=%08lx\n", psr, __get_HSR(0), clkc);
/* the CB70 has some alternative ways of setting the clock speed through switches accessed
* through the FPGA. */
if (cpu_system == __frv_mb93091_cb70) {
unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
if (clkswr & 0x1000)
__clkin_clock_speed_HZ = 60000000UL;
else
__clkin_clock_speed_HZ =
((clkswr >> 8) & 0xf) * 10000000 +
((clkswr >> 4) & 0xf) * 1000000 +
((clkswr ) & 0xf) * 100000;
}
/* the FR451 is currently fixed at 24MHz */
else if (cpu_system == __frv_mb93091_cb451) {
//__clkin_clock_speed_HZ = 24000000UL; // CB451-FPGA
unsigned short clkswr = *(volatile unsigned short *) 0xffc00104UL & 0x1fffUL;
if (clkswr & 0x1000)
__clkin_clock_speed_HZ = 60000000UL;
else
__clkin_clock_speed_HZ =
((clkswr >> 8) & 0xf) * 10000000 +
((clkswr >> 4) & 0xf) * 1000000 +
((clkswr ) & 0xf) * 100000;
}
/* otherwise determine the clockspeed from VDK or other registers */
else {
__clkin_clock_speed_HZ = __get_CLKIN();
}
/* look up the appropriate clock relationships table entry */
mode = &undef_clock_cmode;
if (clock_cmodes) {
tmode = &clock_cmodes[(clkc & CLKC_CMODE) >> CLKC_CMODE_s];
if (tmode->xbus)
mode = tmode;
}
#define CLOCK(SRC,RATIO) ((SRC) * (((RATIO) >> 4) & 0x0f) / ((RATIO) & 0x0f))
if (clock_doubled)
__clkin_clock_speed_HZ <<= 1;
__ext_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->xbus);
__sdram_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
__dsu_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->dsu);
switch (clkc & CLKC_CM) {
case 0: /* High */
__core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->corebus);
__core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->core);
break;
case 1: /* Medium */
__core_bus_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
__core_clock_speed_HZ = CLOCK(__clkin_clock_speed_HZ, mode->sdram);
break;
case 2: /* Low; not supported */
case 3: /* UNDEF */
printk("Unsupported CLKC CM %ld\n", clkc & CLKC_CM);
panic("Bye");
}
__res_bus_clock_speed_HZ = __ext_bus_clock_speed_HZ;
if (clkc & CLKC_P0)
__res_bus_clock_speed_HZ >>= 1;
if (verbose) {
printk("CLKIN: %lu.%3.3luMHz\n",
__clkin_clock_speed_HZ / 1000000,
(__clkin_clock_speed_HZ / 1000) % 1000);
printk("CLKS:"
" ext=%luMHz res=%luMHz sdram=%luMHz cbus=%luMHz core=%luMHz dsu=%luMHz\n",
__ext_bus_clock_speed_HZ / 1000000,
__res_bus_clock_speed_HZ / 1000000,
__sdram_clock_speed_HZ / 1000000,
__core_bus_clock_speed_HZ / 1000000,
__core_clock_speed_HZ / 1000000,
__dsu_clock_speed_HZ / 1000000
);
}
/* calculate the number of __delay() loop iterations per sec (2 insn loop) */
__delay_loops_MHz = __core_clock_speed_HZ / (1000000 * 2);
/* set the serial prescaler */
__serial_clock_speed_HZ = __res_bus_clock_speed_HZ;
quot = 1;
while (__serial_clock_speed_HZ / quot / 16 / 65536 > 3000)
quot += 1;
/* double the divisor if P0 is clear, so that if/when P0 is set, it's still achievable
* - we have to be careful - dividing too much can mean we can't get 115200 baud
*/
if (__serial_clock_speed_HZ > 32000000 && !(clkc & CLKC_P0))
quot <<= 1;
__serial_clock_speed_HZ /= quot;
__frv_uart0.uartclk = __serial_clock_speed_HZ;
__frv_uart1.uartclk = __serial_clock_speed_HZ;
if (verbose)
printk(" uart=%luMHz\n", __serial_clock_speed_HZ / 1000000 * quot);
while (!(__get_UART0_LSR() & UART_LSR_TEMT))
continue;
while (!(__get_UART1_LSR() & UART_LSR_TEMT))
continue;
__set_UCPVR(quot);
__set_UCPSR(0);
} /* end determine_clocks() */
/*****************************************************************************/
/*
* reserve some DMA consistent memory
*/
#ifdef CONFIG_RESERVE_DMA_COHERENT
static void __init reserve_dma_coherent(void)
{
unsigned long ampr;
/* find the first non-kernel memory tile and steal it */
#define __steal_AMPR(r) \
if (__get_DAMPR(r) & xAMPRx_V) { \
ampr = __get_DAMPR(r); \
__set_DAMPR(r, ampr | xAMPRx_S | xAMPRx_C); \
__set_IAMPR(r, 0); \
goto found; \
}
__steal_AMPR(1);
__steal_AMPR(2);
__steal_AMPR(3);
__steal_AMPR(4);
__steal_AMPR(5);
__steal_AMPR(6);
if (PSR_IMPLE(__get_PSR()) == PSR_IMPLE_FR551) {
__steal_AMPR(7);
__steal_AMPR(8);
__steal_AMPR(9);
__steal_AMPR(10);
__steal_AMPR(11);
__steal_AMPR(12);
__steal_AMPR(13);
__steal_AMPR(14);
}
/* unable to grant any DMA consistent memory */
printk("No DMA consistent memory reserved\n");
return;
found:
dma_coherent_mem_start = ampr & xAMPRx_PPFN;
ampr &= xAMPRx_SS;
ampr >>= 4;
ampr = 1 << (ampr - 3 + 20);
dma_coherent_mem_end = dma_coherent_mem_start + ampr;
printk("DMA consistent memory reserved %lx-%lx\n",
dma_coherent_mem_start, dma_coherent_mem_end);
} /* end reserve_dma_coherent() */
#endif
/*****************************************************************************/
/*
* calibrate the delay loop
*/
void calibrate_delay(void)
{
loops_per_jiffy = __delay_loops_MHz * (1000000 / HZ);
printk("Calibrating delay loop... %lu.%02lu BogoMIPS\n",
loops_per_jiffy / (500000 / HZ),
(loops_per_jiffy / (5000 / HZ)) % 100);
} /* end calibrate_delay() */
/*****************************************************************************/
/*
* look through the command line for some things we need to know immediately
*/
static void __init parse_cmdline_early(char *cmdline)
{
if (!cmdline)
return;
while (*cmdline) {
if (*cmdline == ' ')
cmdline++;
/* "mem=XXX[kKmM]" sets SDRAM size to <mem>, overriding the value we worked
* out from the SDRAM controller mask register
*/
if (!strncmp(cmdline, "mem=", 4)) {
unsigned long long mem_size;
mem_size = memparse(cmdline + 4, &cmdline);
memory_end = memory_start + mem_size;
}
while (*cmdline && *cmdline != ' ')
cmdline++;
}
} /* end parse_cmdline_early() */
/*****************************************************************************/
/*
*
*/
void __init setup_arch(char **cmdline_p)
{
#ifdef CONFIG_MMU
printk("Linux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
#else
printk("uClinux FR-V port done by Red Hat Inc <dhowells@redhat.com>\n");
#endif
memcpy(boot_command_line, redboot_command_line, COMMAND_LINE_SIZE);
determine_cpu();
determine_clocks(1);
/* For printk-directly-beats-on-serial-hardware hack */
console_set_baud(115200);
#ifdef CONFIG_GDBSTUB
gdbstub_set_baud(115200);
#endif
#ifdef CONFIG_RESERVE_DMA_COHERENT
reserve_dma_coherent();
#endif
dump_memory_map();
#ifdef CONFIG_MB93090_MB00
if (mb93090_mb00_detected)
mb93090_display();
#endif
/* register those serial ports that are available */
#ifdef CONFIG_FRV_ONCPU_SERIAL
#ifndef CONFIG_GDBSTUB_UART0
__reg(UART0_BASE + UART_IER * 8) = 0;
early_serial_setup(&__frv_uart0);
#endif
#ifndef CONFIG_GDBSTUB_UART1
__reg(UART1_BASE + UART_IER * 8) = 0;
early_serial_setup(&__frv_uart1);
#endif
#endif
/* deal with the command line - RedBoot may have passed one to the kernel */
memcpy(command_line, boot_command_line, sizeof(command_line));
*cmdline_p = &command_line[0];
parse_cmdline_early(command_line);
/* set up the memory description
* - by now the stack is part of the init task */
printk("Memory %08lx-%08lx\n", memory_start, memory_end);
BUG_ON(memory_start == memory_end);
init_mm.start_code = (unsigned long) _stext;
init_mm.end_code = (unsigned long) _etext;
init_mm.end_data = (unsigned long) _edata;
#if 0 /* DAVIDM - don't set brk just incase someone decides to use it */
init_mm.brk = (unsigned long) &_end;
#else
init_mm.brk = (unsigned long) 0;
#endif
#ifdef DEBUG
printk("KERNEL -> TEXT=0x%p-0x%p DATA=0x%p-0x%p BSS=0x%p-0x%p\n",
_stext, _etext, _sdata, _edata, __bss_start, __bss_stop);
#endif
#ifdef CONFIG_VT
#if defined(CONFIG_VGA_CONSOLE)
conswitchp = &vga_con;
#elif defined(CONFIG_DUMMY_CONSOLE)
conswitchp = &dummy_con;
#endif
#endif
#ifdef CONFIG_MMU
setup_linux_memory();
#else
setup_uclinux_memory();
#endif
/* get kmalloc into gear */
paging_init();
/* init DMA */
frv_dma_init();
#ifdef DEBUG
printk("Done setup_arch\n");
#endif
/* start the decrement timer running */
// asm volatile("movgs %0,timerd" :: "r"(10000000));
// __set_HSR(0, __get_HSR(0) | HSR0_ETMD);
} /* end setup_arch() */
#if 0
/*****************************************************************************/
/*
*
*/
static int setup_arch_serial(void)
{
/* register those serial ports that are available */
#ifndef CONFIG_GDBSTUB_UART0
early_serial_setup(&__frv_uart0);
#endif
#ifndef CONFIG_GDBSTUB_UART1
early_serial_setup(&__frv_uart1);
#endif
return 0;
} /* end setup_arch_serial() */
late_initcall(setup_arch_serial);
#endif
/*****************************************************************************/
/*
* set up the memory map for normal MMU linux
*/
#ifdef CONFIG_MMU
static void __init setup_linux_memory(void)
{
unsigned long bootmap_size, low_top_pfn, kstart, kend, high_mem;
unsigned long physpages;
kstart = (unsigned long) &__kernel_image_start - PAGE_OFFSET;
kend = (unsigned long) &__kernel_image_end - PAGE_OFFSET;
kstart = kstart & PAGE_MASK;
kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
/* give all the memory to the bootmap allocator, tell it to put the
* boot mem_map immediately following the kernel image
*/
bootmap_size = init_bootmem_node(NODE_DATA(0),
kend >> PAGE_SHIFT, /* map addr */
memory_start >> PAGE_SHIFT, /* start of RAM */
memory_end >> PAGE_SHIFT /* end of RAM */
);
/* pass the memory that the kernel can immediately use over to the bootmem allocator */
max_mapnr = physpages = (memory_end - memory_start) >> PAGE_SHIFT;
low_top_pfn = (KERNEL_LOWMEM_END - KERNEL_LOWMEM_START) >> PAGE_SHIFT;
high_mem = 0;
if (physpages > low_top_pfn) {
#ifdef CONFIG_HIGHMEM
high_mem = physpages - low_top_pfn;
#else
max_mapnr = physpages = low_top_pfn;
#endif
}
else {
low_top_pfn = physpages;
}
min_low_pfn = memory_start >> PAGE_SHIFT;
max_low_pfn = low_top_pfn;
max_pfn = memory_end >> PAGE_SHIFT;
num_mappedpages = low_top_pfn;
printk(KERN_NOTICE "%ldMB LOWMEM available.\n", low_top_pfn >> (20 - PAGE_SHIFT));
free_bootmem(memory_start, low_top_pfn << PAGE_SHIFT);
#ifdef CONFIG_HIGHMEM
if (high_mem)
printk(KERN_NOTICE "%ldMB HIGHMEM available.\n", high_mem >> (20 - PAGE_SHIFT));
#endif
/* take back the memory occupied by the kernel image and the bootmem alloc map */
reserve_bootmem(kstart, kend - kstart + bootmap_size,
BOOTMEM_DEFAULT);
/* reserve the memory occupied by the initial ramdisk */
#ifdef CONFIG_BLK_DEV_INITRD
if (LOADER_TYPE && INITRD_START) {
if (INITRD_START + INITRD_SIZE <= (low_top_pfn << PAGE_SHIFT)) {
reserve_bootmem(INITRD_START, INITRD_SIZE,
BOOTMEM_DEFAULT);
initrd_start = INITRD_START + PAGE_OFFSET;
initrd_end = initrd_start + INITRD_SIZE;
}
else {
printk(KERN_ERR
"initrd extends beyond end of memory (0x%08lx > 0x%08lx)\n"
"disabling initrd\n",
INITRD_START + INITRD_SIZE,
low_top_pfn << PAGE_SHIFT);
initrd_start = 0;
}
}
#endif
} /* end setup_linux_memory() */
#endif
/*****************************************************************************/
/*
* set up the memory map for uClinux
*/
#ifndef CONFIG_MMU
static void __init setup_uclinux_memory(void)
{
#ifdef CONFIG_PROTECT_KERNEL
unsigned long dampr;
#endif
unsigned long kend;
int bootmap_size;
kend = (unsigned long) &__kernel_image_end;
kend = (kend + PAGE_SIZE - 1) & PAGE_MASK;
/* give all the memory to the bootmap allocator, tell it to put the
* boot mem_map immediately following the kernel image
*/
bootmap_size = init_bootmem_node(NODE_DATA(0),
kend >> PAGE_SHIFT, /* map addr */
memory_start >> PAGE_SHIFT, /* start of RAM */
memory_end >> PAGE_SHIFT /* end of RAM */
);
/* free all the usable memory */
free_bootmem(memory_start, memory_end - memory_start);
high_memory = (void *) (memory_end & PAGE_MASK);
max_mapnr = ((unsigned long) high_memory - PAGE_OFFSET) >> PAGE_SHIFT;
min_low_pfn = memory_start >> PAGE_SHIFT;
max_low_pfn = memory_end >> PAGE_SHIFT;
max_pfn = max_low_pfn;
/* now take back the bits the core kernel is occupying */
#ifndef CONFIG_PROTECT_KERNEL
reserve_bootmem(kend, bootmap_size, BOOTMEM_DEFAULT);
reserve_bootmem((unsigned long) &__kernel_image_start,
kend - (unsigned long) &__kernel_image_start,
BOOTMEM_DEFAULT);
#else
dampr = __get_DAMPR(0);
dampr &= xAMPRx_SS;
dampr = (dampr >> 4) + 17;
dampr = 1 << dampr;
reserve_bootmem(__get_DAMPR(0) & xAMPRx_PPFN, dampr, BOOTMEM_DEFAULT);
#endif
/* reserve some memory to do uncached DMA through if requested */
#ifdef CONFIG_RESERVE_DMA_COHERENT
if (dma_coherent_mem_start)
reserve_bootmem(dma_coherent_mem_start,
dma_coherent_mem_end - dma_coherent_mem_start,
BOOTMEM_DEFAULT);
#endif
} /* end setup_uclinux_memory() */
#endif
/*****************************************************************************/
/*
* get CPU information for use by procfs
*/
static int show_cpuinfo(struct seq_file *m, void *v)
{
const char *gr, *fr, *fm, *fp, *cm, *nem, *ble;
#ifdef CONFIG_PM
const char *sep;
#endif
gr = cpu_hsr0_all & HSR0_GRHE ? "gr0-63" : "gr0-31";
fr = cpu_hsr0_all & HSR0_FRHE ? "fr0-63" : "fr0-31";
fm = cpu_psr_all & PSR_EM ? ", Media" : "";
fp = cpu_psr_all & PSR_EF ? ", FPU" : "";
cm = cpu_psr_all & PSR_CM ? ", CCCR" : "";
nem = cpu_psr_all & PSR_NEM ? ", NE" : "";
ble = cpu_psr_all & PSR_BE ? "BE" : "LE";
seq_printf(m,
"CPU-Series:\t%s\n"
"CPU-Core:\t%s, %s, %s%s%s\n"
"CPU:\t\t%s\n"
"MMU:\t\t%s\n"
"FP-Media:\t%s%s%s\n"
"System:\t\t%s",
cpu_series,
cpu_core, gr, ble, cm, nem,
cpu_silicon,
cpu_mmu,
fr, fm, fp,
cpu_system);
if (cpu_board1)
seq_printf(m, ", %s", cpu_board1);
if (cpu_board2)
seq_printf(m, ", %s", cpu_board2);
seq_printf(m, "\n");
#ifdef CONFIG_PM
seq_printf(m, "PM-Controls:");
sep = "\t";
if (clock_bits_settable & CLOCK_BIT_CMODE) {
seq_printf(m, "%scmode=0x%04hx", sep, clock_cmodes_permitted);
sep = ", ";
}
if (clock_bits_settable & CLOCK_BIT_CM) {
seq_printf(m, "%scm=0x%lx", sep, clock_bits_settable & CLOCK_BIT_CM);
sep = ", ";
}
if (clock_bits_settable & CLOCK_BIT_P0) {
seq_printf(m, "%sp0=0x3", sep);
sep = ", ";
}
seq_printf(m, "%ssuspend=0x22\n", sep);
#endif
seq_printf(m,
"PM-Status:\tcmode=%d, cm=%d, p0=%d\n",
clock_cmode_current, clock_cm_current, clock_p0_current);
#define print_clk(TAG, VAR) \
seq_printf(m, "Clock-" TAG ":\t%lu.%2.2lu MHz\n", VAR / 1000000, (VAR / 10000) % 100)
print_clk("In", __clkin_clock_speed_HZ);
print_clk("Core", __core_clock_speed_HZ);
print_clk("SDRAM", __sdram_clock_speed_HZ);
print_clk("CBus", __core_bus_clock_speed_HZ);
print_clk("Res", __res_bus_clock_speed_HZ);
print_clk("Ext", __ext_bus_clock_speed_HZ);
print_clk("DSU", __dsu_clock_speed_HZ);
seq_printf(m,
"BogoMips:\t%lu.%02lu\n",
(loops_per_jiffy * HZ) / 500000, ((loops_per_jiffy * HZ) / 5000) % 100);
return 0;
} /* end show_cpuinfo() */
static void *c_start(struct seq_file *m, loff_t *pos)
{
return *pos < NR_CPUS ? (void *) 0x12345678 : NULL;
}
static void *c_next(struct seq_file *m, void *v, loff_t *pos)
{
++*pos;
return c_start(m, pos);
}
static void c_stop(struct seq_file *m, void *v)
{
}
const struct seq_operations cpuinfo_op = {
.start = c_start,
.next = c_next,
.stop = c_stop,
.show = show_cpuinfo,
};
void arch_gettod(int *year, int *mon, int *day, int *hour,
int *min, int *sec)
{
*year = *mon = *day = *hour = *min = *sec = 0;
}
/*****************************************************************************/
/*
*
*/
#ifdef CONFIG_MB93090_MB00
static void __init mb93090_sendlcdcmd(uint32_t cmd)
{
unsigned long base = __addr_LCD();
int loop;
/* request reading of the busy flag */
__set_LCD(base, LCD_CMD_READ_BUSY);
__set_LCD(base, LCD_CMD_READ_BUSY & ~LCD_E);
/* wait for the busy flag to become clear */
for (loop = 10000; loop > 0; loop--)
if (!(__get_LCD(base) & 0x80))
break;
/* send the command */
__set_LCD(base, cmd);
__set_LCD(base, cmd & ~LCD_E);
} /* end mb93090_sendlcdcmd() */
/*****************************************************************************/
/*
* write to the MB93090 LEDs and LCD
*/
static void __init mb93090_display(void)
{
const char *p;
__set_LEDS(0);
/* set up the LCD */
mb93090_sendlcdcmd(LCD_CMD_CLEAR);
mb93090_sendlcdcmd(LCD_CMD_FUNCSET(1,1,0));
mb93090_sendlcdcmd(LCD_CMD_ON(0,0));
mb93090_sendlcdcmd(LCD_CMD_HOME);
mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(0));
for (p = mb93090_banner; *p; p++)
mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
mb93090_sendlcdcmd(LCD_CMD_SET_DD_ADDR(64));
for (p = mb93090_version; *p; p++)
mb93090_sendlcdcmd(LCD_DATA_WRITE(*p));
} /* end mb93090_display() */
#endif // CONFIG_MB93090_MB00
Reference in New Issue View Git Blame Copy Permalink