linux/drivers/phy/phy-lpc18xx-usb-otg.c
Thomas Gleixner d2912cb15b treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500
Based on 2 normalized pattern(s):

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation

  this program is free software you can redistribute it and or modify
  it under the terms of the gnu general public license version 2 as
  published by the free software foundation #

extracted by the scancode license scanner the SPDX license identifier

  GPL-2.0-only

has been chosen to replace the boilerplate/reference in 4122 file(s).

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Enrico Weigelt <info@metux.net>
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Allison Randal <allison@lohutok.net>
Cc: linux-spdx@vger.kernel.org
Link: https://lkml.kernel.org/r/20190604081206.933168790@linutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-19 17:09:55 +02:00

146 lines
3.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* PHY driver for NXP LPC18xx/43xx internal USB OTG PHY
*
* Copyright (C) 2015 Joachim Eastwood <manabian@gmail.com>
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
/* USB OTG PHY register offset and bit in CREG */
#define LPC18XX_CREG_CREG0 0x004
#define LPC18XX_CREG_CREG0_USB0PHY BIT(5)
struct lpc18xx_usb_otg_phy {
struct phy *phy;
struct clk *clk;
struct regmap *reg;
};
static int lpc18xx_usb_otg_phy_init(struct phy *phy)
{
struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
int ret;
/* The PHY must be clocked at 480 MHz */
ret = clk_set_rate(lpc->clk, 480000000);
if (ret)
return ret;
return clk_prepare(lpc->clk);
}
static int lpc18xx_usb_otg_phy_exit(struct phy *phy)
{
struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
clk_unprepare(lpc->clk);
return 0;
}
static int lpc18xx_usb_otg_phy_power_on(struct phy *phy)
{
struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
int ret;
ret = clk_enable(lpc->clk);
if (ret)
return ret;
/* The bit in CREG is cleared to enable the PHY */
ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
LPC18XX_CREG_CREG0_USB0PHY, 0);
if (ret) {
clk_disable(lpc->clk);
return ret;
}
return 0;
}
static int lpc18xx_usb_otg_phy_power_off(struct phy *phy)
{
struct lpc18xx_usb_otg_phy *lpc = phy_get_drvdata(phy);
int ret;
ret = regmap_update_bits(lpc->reg, LPC18XX_CREG_CREG0,
LPC18XX_CREG_CREG0_USB0PHY,
LPC18XX_CREG_CREG0_USB0PHY);
if (ret)
return ret;
clk_disable(lpc->clk);
return 0;
}
static const struct phy_ops lpc18xx_usb_otg_phy_ops = {
.init = lpc18xx_usb_otg_phy_init,
.exit = lpc18xx_usb_otg_phy_exit,
.power_on = lpc18xx_usb_otg_phy_power_on,
.power_off = lpc18xx_usb_otg_phy_power_off,
.owner = THIS_MODULE,
};
static int lpc18xx_usb_otg_phy_probe(struct platform_device *pdev)
{
struct phy_provider *phy_provider;
struct lpc18xx_usb_otg_phy *lpc;
lpc = devm_kzalloc(&pdev->dev, sizeof(*lpc), GFP_KERNEL);
if (!lpc)
return -ENOMEM;
lpc->reg = syscon_node_to_regmap(pdev->dev.of_node->parent);
if (IS_ERR(lpc->reg)) {
dev_err(&pdev->dev, "failed to get syscon\n");
return PTR_ERR(lpc->reg);
}
lpc->clk = devm_clk_get(&pdev->dev, NULL);
if (IS_ERR(lpc->clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(lpc->clk);
}
lpc->phy = devm_phy_create(&pdev->dev, NULL, &lpc18xx_usb_otg_phy_ops);
if (IS_ERR(lpc->phy)) {
dev_err(&pdev->dev, "failed to create PHY\n");
return PTR_ERR(lpc->phy);
}
phy_set_drvdata(lpc->phy, lpc);
phy_provider = devm_of_phy_provider_register(&pdev->dev,
of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static const struct of_device_id lpc18xx_usb_otg_phy_match[] = {
{ .compatible = "nxp,lpc1850-usb-otg-phy" },
{ }
};
MODULE_DEVICE_TABLE(of, lpc18xx_usb_otg_phy_match);
static struct platform_driver lpc18xx_usb_otg_phy_driver = {
.probe = lpc18xx_usb_otg_phy_probe,
.driver = {
.name = "lpc18xx-usb-otg-phy",
.of_match_table = lpc18xx_usb_otg_phy_match,
},
};
module_platform_driver(lpc18xx_usb_otg_phy_driver);
MODULE_AUTHOR("Joachim Eastwood <manabian@gmail.com>");
MODULE_DESCRIPTION("NXP LPC18xx/43xx USB OTG PHY driver");
MODULE_LICENSE("GPL v2");