mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 17:12:06 +00:00
e4d54f71d2
Long ago, only in the lab, there was OPALv1 and OPALv2. Now there is just OPALv3, with nobody ever expecting anything on pre-OPALv3 to be cared about or supported by mainline kernels. So, let's remove FW_FEATURE_OPALv3 and instead use FW_FEATURE_OPAL exclusively. Signed-off-by: Stewart Smith <stewart@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
621 lines
16 KiB
C
621 lines
16 KiB
C
/*
|
|
* POWERNV cpufreq driver for the IBM POWER processors
|
|
*
|
|
* (C) Copyright IBM 2014
|
|
*
|
|
* Author: Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
*/
|
|
|
|
#define pr_fmt(fmt) "powernv-cpufreq: " fmt
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/module.h>
|
|
#include <linux/cpufreq.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/of.h>
|
|
#include <linux/reboot.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/cputhreads.h>
|
|
#include <asm/firmware.h>
|
|
#include <asm/reg.h>
|
|
#include <asm/smp.h> /* Required for cpu_sibling_mask() in UP configs */
|
|
#include <asm/opal.h>
|
|
|
|
#define POWERNV_MAX_PSTATES 256
|
|
#define PMSR_PSAFE_ENABLE (1UL << 30)
|
|
#define PMSR_SPR_EM_DISABLE (1UL << 31)
|
|
#define PMSR_MAX(x) ((x >> 32) & 0xFF)
|
|
|
|
static struct cpufreq_frequency_table powernv_freqs[POWERNV_MAX_PSTATES+1];
|
|
static bool rebooting, throttled, occ_reset;
|
|
|
|
static struct chip {
|
|
unsigned int id;
|
|
bool throttled;
|
|
cpumask_t mask;
|
|
struct work_struct throttle;
|
|
bool restore;
|
|
} *chips;
|
|
|
|
static int nr_chips;
|
|
|
|
/*
|
|
* Note: The set of pstates consists of contiguous integers, the
|
|
* smallest of which is indicated by powernv_pstate_info.min, the
|
|
* largest of which is indicated by powernv_pstate_info.max.
|
|
*
|
|
* The nominal pstate is the highest non-turbo pstate in this
|
|
* platform. This is indicated by powernv_pstate_info.nominal.
|
|
*/
|
|
static struct powernv_pstate_info {
|
|
int min;
|
|
int max;
|
|
int nominal;
|
|
int nr_pstates;
|
|
} powernv_pstate_info;
|
|
|
|
/*
|
|
* Initialize the freq table based on data obtained
|
|
* from the firmware passed via device-tree
|
|
*/
|
|
static int init_powernv_pstates(void)
|
|
{
|
|
struct device_node *power_mgt;
|
|
int i, pstate_min, pstate_max, pstate_nominal, nr_pstates = 0;
|
|
const __be32 *pstate_ids, *pstate_freqs;
|
|
u32 len_ids, len_freqs;
|
|
|
|
power_mgt = of_find_node_by_path("/ibm,opal/power-mgt");
|
|
if (!power_mgt) {
|
|
pr_warn("power-mgt node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_property_read_u32(power_mgt, "ibm,pstate-min", &pstate_min)) {
|
|
pr_warn("ibm,pstate-min node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_property_read_u32(power_mgt, "ibm,pstate-max", &pstate_max)) {
|
|
pr_warn("ibm,pstate-max node not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (of_property_read_u32(power_mgt, "ibm,pstate-nominal",
|
|
&pstate_nominal)) {
|
|
pr_warn("ibm,pstate-nominal not found\n");
|
|
return -ENODEV;
|
|
}
|
|
pr_info("cpufreq pstate min %d nominal %d max %d\n", pstate_min,
|
|
pstate_nominal, pstate_max);
|
|
|
|
pstate_ids = of_get_property(power_mgt, "ibm,pstate-ids", &len_ids);
|
|
if (!pstate_ids) {
|
|
pr_warn("ibm,pstate-ids not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pstate_freqs = of_get_property(power_mgt, "ibm,pstate-frequencies-mhz",
|
|
&len_freqs);
|
|
if (!pstate_freqs) {
|
|
pr_warn("ibm,pstate-frequencies-mhz not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
if (len_ids != len_freqs) {
|
|
pr_warn("Entries in ibm,pstate-ids and "
|
|
"ibm,pstate-frequencies-mhz does not match\n");
|
|
}
|
|
|
|
nr_pstates = min(len_ids, len_freqs) / sizeof(u32);
|
|
if (!nr_pstates) {
|
|
pr_warn("No PStates found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
pr_debug("NR PStates %d\n", nr_pstates);
|
|
for (i = 0; i < nr_pstates; i++) {
|
|
u32 id = be32_to_cpu(pstate_ids[i]);
|
|
u32 freq = be32_to_cpu(pstate_freqs[i]);
|
|
|
|
pr_debug("PState id %d freq %d MHz\n", id, freq);
|
|
powernv_freqs[i].frequency = freq * 1000; /* kHz */
|
|
powernv_freqs[i].driver_data = id;
|
|
}
|
|
/* End of list marker entry */
|
|
powernv_freqs[i].frequency = CPUFREQ_TABLE_END;
|
|
|
|
powernv_pstate_info.min = pstate_min;
|
|
powernv_pstate_info.max = pstate_max;
|
|
powernv_pstate_info.nominal = pstate_nominal;
|
|
powernv_pstate_info.nr_pstates = nr_pstates;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Returns the CPU frequency corresponding to the pstate_id. */
|
|
static unsigned int pstate_id_to_freq(int pstate_id)
|
|
{
|
|
int i;
|
|
|
|
i = powernv_pstate_info.max - pstate_id;
|
|
if (i >= powernv_pstate_info.nr_pstates || i < 0) {
|
|
pr_warn("PState id %d outside of PState table, "
|
|
"reporting nominal id %d instead\n",
|
|
pstate_id, powernv_pstate_info.nominal);
|
|
i = powernv_pstate_info.max - powernv_pstate_info.nominal;
|
|
}
|
|
|
|
return powernv_freqs[i].frequency;
|
|
}
|
|
|
|
/*
|
|
* cpuinfo_nominal_freq_show - Show the nominal CPU frequency as indicated by
|
|
* the firmware
|
|
*/
|
|
static ssize_t cpuinfo_nominal_freq_show(struct cpufreq_policy *policy,
|
|
char *buf)
|
|
{
|
|
return sprintf(buf, "%u\n",
|
|
pstate_id_to_freq(powernv_pstate_info.nominal));
|
|
}
|
|
|
|
struct freq_attr cpufreq_freq_attr_cpuinfo_nominal_freq =
|
|
__ATTR_RO(cpuinfo_nominal_freq);
|
|
|
|
static struct freq_attr *powernv_cpu_freq_attr[] = {
|
|
&cpufreq_freq_attr_scaling_available_freqs,
|
|
&cpufreq_freq_attr_cpuinfo_nominal_freq,
|
|
NULL,
|
|
};
|
|
|
|
/* Helper routines */
|
|
|
|
/* Access helpers to power mgt SPR */
|
|
|
|
static inline unsigned long get_pmspr(unsigned long sprn)
|
|
{
|
|
switch (sprn) {
|
|
case SPRN_PMCR:
|
|
return mfspr(SPRN_PMCR);
|
|
|
|
case SPRN_PMICR:
|
|
return mfspr(SPRN_PMICR);
|
|
|
|
case SPRN_PMSR:
|
|
return mfspr(SPRN_PMSR);
|
|
}
|
|
BUG();
|
|
}
|
|
|
|
static inline void set_pmspr(unsigned long sprn, unsigned long val)
|
|
{
|
|
switch (sprn) {
|
|
case SPRN_PMCR:
|
|
mtspr(SPRN_PMCR, val);
|
|
return;
|
|
|
|
case SPRN_PMICR:
|
|
mtspr(SPRN_PMICR, val);
|
|
return;
|
|
}
|
|
BUG();
|
|
}
|
|
|
|
/*
|
|
* Use objects of this type to query/update
|
|
* pstates on a remote CPU via smp_call_function.
|
|
*/
|
|
struct powernv_smp_call_data {
|
|
unsigned int freq;
|
|
int pstate_id;
|
|
};
|
|
|
|
/*
|
|
* powernv_read_cpu_freq: Reads the current frequency on this CPU.
|
|
*
|
|
* Called via smp_call_function.
|
|
*
|
|
* Note: The caller of the smp_call_function should pass an argument of
|
|
* the type 'struct powernv_smp_call_data *' along with this function.
|
|
*
|
|
* The current frequency on this CPU will be returned via
|
|
* ((struct powernv_smp_call_data *)arg)->freq;
|
|
*/
|
|
static void powernv_read_cpu_freq(void *arg)
|
|
{
|
|
unsigned long pmspr_val;
|
|
s8 local_pstate_id;
|
|
struct powernv_smp_call_data *freq_data = arg;
|
|
|
|
pmspr_val = get_pmspr(SPRN_PMSR);
|
|
|
|
/*
|
|
* The local pstate id corresponds bits 48..55 in the PMSR.
|
|
* Note: Watch out for the sign!
|
|
*/
|
|
local_pstate_id = (pmspr_val >> 48) & 0xFF;
|
|
freq_data->pstate_id = local_pstate_id;
|
|
freq_data->freq = pstate_id_to_freq(freq_data->pstate_id);
|
|
|
|
pr_debug("cpu %d pmsr %016lX pstate_id %d frequency %d kHz\n",
|
|
raw_smp_processor_id(), pmspr_val, freq_data->pstate_id,
|
|
freq_data->freq);
|
|
}
|
|
|
|
/*
|
|
* powernv_cpufreq_get: Returns the CPU frequency as reported by the
|
|
* firmware for CPU 'cpu'. This value is reported through the sysfs
|
|
* file cpuinfo_cur_freq.
|
|
*/
|
|
static unsigned int powernv_cpufreq_get(unsigned int cpu)
|
|
{
|
|
struct powernv_smp_call_data freq_data;
|
|
|
|
smp_call_function_any(cpu_sibling_mask(cpu), powernv_read_cpu_freq,
|
|
&freq_data, 1);
|
|
|
|
return freq_data.freq;
|
|
}
|
|
|
|
/*
|
|
* set_pstate: Sets the pstate on this CPU.
|
|
*
|
|
* This is called via an smp_call_function.
|
|
*
|
|
* The caller must ensure that freq_data is of the type
|
|
* (struct powernv_smp_call_data *) and the pstate_id which needs to be set
|
|
* on this CPU should be present in freq_data->pstate_id.
|
|
*/
|
|
static void set_pstate(void *freq_data)
|
|
{
|
|
unsigned long val;
|
|
unsigned long pstate_ul =
|
|
((struct powernv_smp_call_data *) freq_data)->pstate_id;
|
|
|
|
val = get_pmspr(SPRN_PMCR);
|
|
val = val & 0x0000FFFFFFFFFFFFULL;
|
|
|
|
pstate_ul = pstate_ul & 0xFF;
|
|
|
|
/* Set both global(bits 56..63) and local(bits 48..55) PStates */
|
|
val = val | (pstate_ul << 56) | (pstate_ul << 48);
|
|
|
|
pr_debug("Setting cpu %d pmcr to %016lX\n",
|
|
raw_smp_processor_id(), val);
|
|
set_pmspr(SPRN_PMCR, val);
|
|
}
|
|
|
|
/*
|
|
* get_nominal_index: Returns the index corresponding to the nominal
|
|
* pstate in the cpufreq table
|
|
*/
|
|
static inline unsigned int get_nominal_index(void)
|
|
{
|
|
return powernv_pstate_info.max - powernv_pstate_info.nominal;
|
|
}
|
|
|
|
static void powernv_cpufreq_throttle_check(void *data)
|
|
{
|
|
unsigned int cpu = smp_processor_id();
|
|
unsigned long pmsr;
|
|
int pmsr_pmax, i;
|
|
|
|
pmsr = get_pmspr(SPRN_PMSR);
|
|
|
|
for (i = 0; i < nr_chips; i++)
|
|
if (chips[i].id == cpu_to_chip_id(cpu))
|
|
break;
|
|
|
|
/* Check for Pmax Capping */
|
|
pmsr_pmax = (s8)PMSR_MAX(pmsr);
|
|
if (pmsr_pmax != powernv_pstate_info.max) {
|
|
if (chips[i].throttled)
|
|
goto next;
|
|
chips[i].throttled = true;
|
|
if (pmsr_pmax < powernv_pstate_info.nominal)
|
|
pr_crit("CPU %d on Chip %u has Pmax reduced below nominal frequency (%d < %d)\n",
|
|
cpu, chips[i].id, pmsr_pmax,
|
|
powernv_pstate_info.nominal);
|
|
else
|
|
pr_info("CPU %d on Chip %u has Pmax reduced below turbo frequency (%d < %d)\n",
|
|
cpu, chips[i].id, pmsr_pmax,
|
|
powernv_pstate_info.max);
|
|
} else if (chips[i].throttled) {
|
|
chips[i].throttled = false;
|
|
pr_info("CPU %d on Chip %u has Pmax restored to %d\n", cpu,
|
|
chips[i].id, pmsr_pmax);
|
|
}
|
|
|
|
/* Check if Psafe_mode_active is set in PMSR. */
|
|
next:
|
|
if (pmsr & PMSR_PSAFE_ENABLE) {
|
|
throttled = true;
|
|
pr_info("Pstate set to safe frequency\n");
|
|
}
|
|
|
|
/* Check if SPR_EM_DISABLE is set in PMSR */
|
|
if (pmsr & PMSR_SPR_EM_DISABLE) {
|
|
throttled = true;
|
|
pr_info("Frequency Control disabled from OS\n");
|
|
}
|
|
|
|
if (throttled) {
|
|
pr_info("PMSR = %16lx\n", pmsr);
|
|
pr_crit("CPU Frequency could be throttled\n");
|
|
}
|
|
}
|
|
|
|
/*
|
|
* powernv_cpufreq_target_index: Sets the frequency corresponding to
|
|
* the cpufreq table entry indexed by new_index on the cpus in the
|
|
* mask policy->cpus
|
|
*/
|
|
static int powernv_cpufreq_target_index(struct cpufreq_policy *policy,
|
|
unsigned int new_index)
|
|
{
|
|
struct powernv_smp_call_data freq_data;
|
|
|
|
if (unlikely(rebooting) && new_index != get_nominal_index())
|
|
return 0;
|
|
|
|
if (!throttled)
|
|
powernv_cpufreq_throttle_check(NULL);
|
|
|
|
freq_data.pstate_id = powernv_freqs[new_index].driver_data;
|
|
|
|
/*
|
|
* Use smp_call_function to send IPI and execute the
|
|
* mtspr on target CPU. We could do that without IPI
|
|
* if current CPU is within policy->cpus (core)
|
|
*/
|
|
smp_call_function_any(policy->cpus, set_pstate, &freq_data, 1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int powernv_cpufreq_cpu_init(struct cpufreq_policy *policy)
|
|
{
|
|
int base, i;
|
|
|
|
base = cpu_first_thread_sibling(policy->cpu);
|
|
|
|
for (i = 0; i < threads_per_core; i++)
|
|
cpumask_set_cpu(base + i, policy->cpus);
|
|
|
|
return cpufreq_table_validate_and_show(policy, powernv_freqs);
|
|
}
|
|
|
|
static int powernv_cpufreq_reboot_notifier(struct notifier_block *nb,
|
|
unsigned long action, void *unused)
|
|
{
|
|
int cpu;
|
|
struct cpufreq_policy cpu_policy;
|
|
|
|
rebooting = true;
|
|
for_each_online_cpu(cpu) {
|
|
cpufreq_get_policy(&cpu_policy, cpu);
|
|
powernv_cpufreq_target_index(&cpu_policy, get_nominal_index());
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static struct notifier_block powernv_cpufreq_reboot_nb = {
|
|
.notifier_call = powernv_cpufreq_reboot_notifier,
|
|
};
|
|
|
|
void powernv_cpufreq_work_fn(struct work_struct *work)
|
|
{
|
|
struct chip *chip = container_of(work, struct chip, throttle);
|
|
unsigned int cpu;
|
|
cpumask_var_t mask;
|
|
|
|
smp_call_function_any(&chip->mask,
|
|
powernv_cpufreq_throttle_check, NULL, 0);
|
|
|
|
if (!chip->restore)
|
|
return;
|
|
|
|
chip->restore = false;
|
|
cpumask_copy(mask, &chip->mask);
|
|
for_each_cpu_and(cpu, mask, cpu_online_mask) {
|
|
int index, tcpu;
|
|
struct cpufreq_policy policy;
|
|
|
|
cpufreq_get_policy(&policy, cpu);
|
|
cpufreq_frequency_table_target(&policy, policy.freq_table,
|
|
policy.cur,
|
|
CPUFREQ_RELATION_C, &index);
|
|
powernv_cpufreq_target_index(&policy, index);
|
|
for_each_cpu(tcpu, policy.cpus)
|
|
cpumask_clear_cpu(tcpu, mask);
|
|
}
|
|
}
|
|
|
|
static char throttle_reason[][30] = {
|
|
"No throttling",
|
|
"Power Cap",
|
|
"Processor Over Temperature",
|
|
"Power Supply Failure",
|
|
"Over Current",
|
|
"OCC Reset"
|
|
};
|
|
|
|
static int powernv_cpufreq_occ_msg(struct notifier_block *nb,
|
|
unsigned long msg_type, void *_msg)
|
|
{
|
|
struct opal_msg *msg = _msg;
|
|
struct opal_occ_msg omsg;
|
|
int i;
|
|
|
|
if (msg_type != OPAL_MSG_OCC)
|
|
return 0;
|
|
|
|
omsg.type = be64_to_cpu(msg->params[0]);
|
|
|
|
switch (omsg.type) {
|
|
case OCC_RESET:
|
|
occ_reset = true;
|
|
pr_info("OCC (On Chip Controller - enforces hard thermal/power limits) Resetting\n");
|
|
/*
|
|
* powernv_cpufreq_throttle_check() is called in
|
|
* target() callback which can detect the throttle state
|
|
* for governors like ondemand.
|
|
* But static governors will not call target() often thus
|
|
* report throttling here.
|
|
*/
|
|
if (!throttled) {
|
|
throttled = true;
|
|
pr_crit("CPU frequency is throttled for duration\n");
|
|
}
|
|
|
|
break;
|
|
case OCC_LOAD:
|
|
pr_info("OCC Loading, CPU frequency is throttled until OCC is started\n");
|
|
break;
|
|
case OCC_THROTTLE:
|
|
omsg.chip = be64_to_cpu(msg->params[1]);
|
|
omsg.throttle_status = be64_to_cpu(msg->params[2]);
|
|
|
|
if (occ_reset) {
|
|
occ_reset = false;
|
|
throttled = false;
|
|
pr_info("OCC Active, CPU frequency is no longer throttled\n");
|
|
|
|
for (i = 0; i < nr_chips; i++) {
|
|
chips[i].restore = true;
|
|
schedule_work(&chips[i].throttle);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
if (omsg.throttle_status &&
|
|
omsg.throttle_status <= OCC_MAX_THROTTLE_STATUS)
|
|
pr_info("OCC: Chip %u Pmax reduced due to %s\n",
|
|
(unsigned int)omsg.chip,
|
|
throttle_reason[omsg.throttle_status]);
|
|
else if (!omsg.throttle_status)
|
|
pr_info("OCC: Chip %u %s\n", (unsigned int)omsg.chip,
|
|
throttle_reason[omsg.throttle_status]);
|
|
else
|
|
return 0;
|
|
|
|
for (i = 0; i < nr_chips; i++)
|
|
if (chips[i].id == omsg.chip) {
|
|
if (!omsg.throttle_status)
|
|
chips[i].restore = true;
|
|
schedule_work(&chips[i].throttle);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static struct notifier_block powernv_cpufreq_opal_nb = {
|
|
.notifier_call = powernv_cpufreq_occ_msg,
|
|
.next = NULL,
|
|
.priority = 0,
|
|
};
|
|
|
|
static void powernv_cpufreq_stop_cpu(struct cpufreq_policy *policy)
|
|
{
|
|
struct powernv_smp_call_data freq_data;
|
|
|
|
freq_data.pstate_id = powernv_pstate_info.min;
|
|
smp_call_function_single(policy->cpu, set_pstate, &freq_data, 1);
|
|
}
|
|
|
|
static struct cpufreq_driver powernv_cpufreq_driver = {
|
|
.name = "powernv-cpufreq",
|
|
.flags = CPUFREQ_CONST_LOOPS,
|
|
.init = powernv_cpufreq_cpu_init,
|
|
.verify = cpufreq_generic_frequency_table_verify,
|
|
.target_index = powernv_cpufreq_target_index,
|
|
.get = powernv_cpufreq_get,
|
|
.stop_cpu = powernv_cpufreq_stop_cpu,
|
|
.attr = powernv_cpu_freq_attr,
|
|
};
|
|
|
|
static int init_chip_info(void)
|
|
{
|
|
unsigned int chip[256];
|
|
unsigned int cpu, i;
|
|
unsigned int prev_chip_id = UINT_MAX;
|
|
|
|
for_each_possible_cpu(cpu) {
|
|
unsigned int id = cpu_to_chip_id(cpu);
|
|
|
|
if (prev_chip_id != id) {
|
|
prev_chip_id = id;
|
|
chip[nr_chips++] = id;
|
|
}
|
|
}
|
|
|
|
chips = kmalloc_array(nr_chips, sizeof(struct chip), GFP_KERNEL);
|
|
if (!chips)
|
|
return -ENOMEM;
|
|
|
|
for (i = 0; i < nr_chips; i++) {
|
|
chips[i].id = chip[i];
|
|
chips[i].throttled = false;
|
|
cpumask_copy(&chips[i].mask, cpumask_of_node(chip[i]));
|
|
INIT_WORK(&chips[i].throttle, powernv_cpufreq_work_fn);
|
|
chips[i].restore = false;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init powernv_cpufreq_init(void)
|
|
{
|
|
int rc = 0;
|
|
|
|
/* Don't probe on pseries (guest) platforms */
|
|
if (!firmware_has_feature(FW_FEATURE_OPAL))
|
|
return -ENODEV;
|
|
|
|
/* Discover pstates from device tree and init */
|
|
rc = init_powernv_pstates();
|
|
if (rc) {
|
|
pr_info("powernv-cpufreq disabled. System does not support PState control\n");
|
|
return rc;
|
|
}
|
|
|
|
/* Populate chip info */
|
|
rc = init_chip_info();
|
|
if (rc)
|
|
return rc;
|
|
|
|
register_reboot_notifier(&powernv_cpufreq_reboot_nb);
|
|
opal_message_notifier_register(OPAL_MSG_OCC, &powernv_cpufreq_opal_nb);
|
|
return cpufreq_register_driver(&powernv_cpufreq_driver);
|
|
}
|
|
module_init(powernv_cpufreq_init);
|
|
|
|
static void __exit powernv_cpufreq_exit(void)
|
|
{
|
|
unregister_reboot_notifier(&powernv_cpufreq_reboot_nb);
|
|
opal_message_notifier_unregister(OPAL_MSG_OCC,
|
|
&powernv_cpufreq_opal_nb);
|
|
cpufreq_unregister_driver(&powernv_cpufreq_driver);
|
|
}
|
|
module_exit(powernv_cpufreq_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_AUTHOR("Vaidyanathan Srinivasan <svaidy at linux.vnet.ibm.com>");
|