linux/arch/arm/mach-pxa/mainstone.c
Linus Torvalds 1205b62390 Included in this update:
- Florian Fainelli noticed that userspace segfaults caused by the lack
   of kernel-userspace helpers was hard to diagnose; we now issue a
   warning when userspace tries to use the helpers but the kernel has
   them disabled.
 
 - Ben Dooks wants compatibility for the old ATAG serial number with DT
   systems.
 
 - Some cleanup of assembly by Nicolas Pitre.
 
 - User accessors optimisation from Vincent Whitchurch.
 
 - More robust kdump on SMP systems from Yufen Wang.
 
 - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
   on RT kernels, and so we convert the Versatile series of platforms
   to use a raw spinlock instead, consolidating the Versatile
   implementation.  We entirely remove the boot_lock on OMAP systems,
   where it's unnecessary.  Further patches for other systems will be
   submitted for the following merge window.
 
 - Start switching old StrongARM-11x0 systems to use gpiolib rather
   than their private GPIO implementation - mostly PCMCIA bits.
 
 - ARM Kconfig cleanups.
 
 - Cleanup a mostly harmless mistake in the recent Spectre patch in 4.20
   (which had the effect that data that can be placed into the init
   sections was incorrectly always placed in the rodata section.)
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIVAwUAXC9wVPTnkBvkraxkAQL9Ig/+Noy2YqJ/OpSvbsGC6k7qMU5b+99SW3Tu
 NvHLE7Y9XBp55QJqLvGW3N8QKOt86W7JVPprWoYiGqLyq3p8271IArrwdYjutn5h
 b03zVoMOW0o8q7uWjXbXk6vangsFGC/pI3o4aXrHUSCUR9ZttItpCprjdfVmwsA8
 EOROZ0lzMlsjwcBZQq/pflHNr6IiEtulaBTgFx2cqKHFoW4QpR4d8yupqi4kyLLP
 C+WVXmp2YaxNZMuBXbLHq28Spkkt/6yNFgxsCnleVaEYjbZ5TvIaZYrd20NN7KSE
 4smGfy5sgv5s1osxY00cVkvAARyRGrNIZ9Y3C1qH3+M+zaW3tsA46dUGC0cZmZPi
 OBRMx8SKqEwzPvL8Mhpj2aCOIzKtJzI52c6Oc4O/dwUZD7QIiA6yJrvmTbwvLDus
 korzyy1/YjpjGyDV2U3+eFalbwXdtsE6hh/Sv6LXIzX2KSLXd1LYyduYYc9hnh/m
 s99j3EGluRlMxB0IhcCOES4jEsAzttKdDXCPichxmjcsYWh1YZtoS+vKYVSXnv/S
 dJk0NuJcrmobV21qvr7U5C9mVek4DIF5CE2k3pcCmpbTk5G9nYMbCTBJWKdKq3WC
 z/oGhc/wwkfcFmqQrf9hJ+Fisn8uHmvE69X1QDe43nUg3xC6hD+O9+rVJhf+zAjB
 dgmMY+pPDHQ=
 =Yl96
 -----END PGP SIGNATURE-----

Merge tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM updates from Russell King:
 "Included in this update:

   - Florian Fainelli noticed that userspace segfaults caused by the
     lack of kernel-userspace helpers was hard to diagnose; we now issue
     a warning when userspace tries to use the helpers but the kernel
     has them disabled.

   - Ben Dooks wants compatibility for the old ATAG serial number with
     DT systems.

   - Some cleanup of assembly by Nicolas Pitre.

   - User accessors optimisation from Vincent Whitchurch.

   - More robust kdump on SMP systems from Yufen Wang.

   - Sebastian Andrzej Siewior noticed problems with the SMP "boot_lock"
     on RT kernels, and so we convert the Versatile series of platforms
     to use a raw spinlock instead, consolidating the Versatile
     implementation. We entirely remove the boot_lock on OMAP systems,
     where it's unnecessary. Further patches for other systems will be
     submitted for the following merge window.

   - Start switching old StrongARM-11x0 systems to use gpiolib rather
     than their private GPIO implementation - mostly PCMCIA bits.

   - ARM Kconfig cleanups.

   - Cleanup a mostly harmless mistake in the recent Spectre patch in
     4.20 (which had the effect that data that can be placed into the
     init sections was incorrectly always placed in the rodata section)"

* tag 'for-4.21' of git://git.armlinux.org.uk/~rmk/linux-arm: (25 commits)
  ARM: omap2: remove unnecessary boot_lock
  ARM: versatile: rename and comment SMP implementation
  ARM: versatile: convert boot_lock to raw
  ARM: vexpress/realview: consolidate immitation CPU hotplug
  ARM: fix the cockup in the previous patch
  ARM: sa1100/cerf: switch to using gpio_led_register_device()
  ARM: sa1100/assabet: switch to using gpio leds
  ARM: sa1100/assabet: add gpio keys support for right-hand two buttons
  ARM: sa1111: remove legacy GPIO interfaces
  pcmcia: sa1100*: remove redundant bvd1/bvd2 setting
  ARM: pxa/lubbock: switch PCMCIA to MAX1600 library
  ARM: pxa/mainstone: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/neponset: switch PCMCIA to MAX1600 library and gpiod APIs
  ARM: sa1100/jornada720: switch PCMCIA to gpiod APIs
  pcmcia: add MAX1600 library
  ARM: sa1100: explicitly register sa11x0-pcmcia devices
  ARM: 8813/1: Make aligned 2-byte getuser()/putuser() atomic on ARMv6+
  ARM: 8812/1: Optimise copy_{from/to}_user for !CPU_USE_DOMAINS
  ARM: 8811/1: always list both ldrd/strd registers explicitly
  ARM: 8808/1: kexec:offline panic_smp_self_stop CPU
  ...
2019-01-05 11:23:17 -08:00

730 lines
18 KiB
C

/*
* linux/arch/arm/mach-pxa/mainstone.c
*
* Support for the Intel HCDDBBVA0 Development Platform.
* (go figure how they came up with such name...)
*
* Author: Nicolas Pitre
* Created: Nov 05, 2002
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/gpio.h>
#include <linux/gpio/gpio-reg.h>
#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/syscore_ops.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/input.h>
#include <linux/gpio_keys.h>
#include <linux/pwm.h>
#include <linux/pwm_backlight.h>
#include <linux/smc91x.h>
#include <linux/platform_data/i2c-pxa.h>
#include <linux/slab.h>
#include <linux/leds.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <mach/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include "pxa27x.h"
#include <mach/mainstone.h>
#include <mach/audio.h>
#include <linux/platform_data/video-pxafb.h>
#include <linux/platform_data/mmc-pxamci.h>
#include <linux/platform_data/irda-pxaficp.h>
#include <linux/platform_data/usb-ohci-pxa27x.h>
#include <linux/platform_data/keypad-pxa27x.h>
#include <mach/smemc.h>
#include "generic.h"
#include "devices.h"
static unsigned long mainstone_pin_config[] = {
/* Chip Select */
GPIO15_nCS_1,
/* LCD - 16bpp Active TFT */
GPIOxx_LCD_TFT_16BPP,
GPIO16_PWM0_OUT, /* Backlight */
/* MMC */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* USB Host Port 1 */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* AC97 */
GPIO28_AC97_BITCLK,
GPIO29_AC97_SDATA_IN_0,
GPIO30_AC97_SDATA_OUT,
GPIO31_AC97_SYNC,
GPIO45_AC97_SYSCLK,
/* Keypad */
GPIO93_KP_DKIN_0,
GPIO94_KP_DKIN_1,
GPIO95_KP_DKIN_2,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
/* I2C */
GPIO117_I2C_SCL,
GPIO118_I2C_SDA,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
.end = (MST_ETH_PHYS + 0xfffff),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MAINSTONE_IRQ(3),
.end = MAINSTONE_IRQ(3),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct smc91x_platdata mainstone_smc91x_info = {
.flags = SMC91X_USE_8BIT | SMC91X_USE_16BIT | SMC91X_USE_32BIT |
SMC91X_NOWAIT | SMC91X_USE_DMA,
.pxa_u16_align4 = true,
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
.dev = {
.platform_data = &mainstone_smc91x_info,
},
};
static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
return 0;
}
static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
}
static long mst_audio_suspend_mask;
static void mst_audio_suspend(void *priv)
{
mst_audio_suspend_mask = MST_MSCWR2;
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
}
static void mst_audio_resume(void *priv)
{
MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
}
static pxa2xx_audio_ops_t mst_audio_ops = {
.startup = mst_audio_startup,
.shutdown = mst_audio_shutdown,
.suspend = mst_audio_suspend,
.resume = mst_audio_resume,
};
static struct resource flash_resources[] = {
[0] = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_CS1_PHYS,
.end = PXA_CS1_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct mtd_partition mainstoneflash0_partitions[] = {
{
.name = "Bootloader",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_WRITEABLE /* force read-only */
},{
.name = "Kernel",
.size = 0x00400000,
.offset = 0x00040000,
},{
.name = "Filesystem",
.size = MTDPART_SIZ_FULL,
.offset = 0x00440000
}
};
static struct flash_platform_data mst_flash_data[2] = {
{
.map_name = "cfi_probe",
.parts = mainstoneflash0_partitions,
.nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
}, {
.map_name = "cfi_probe",
.parts = NULL,
.nr_parts = 0,
}
};
static struct platform_device mst_flash_device[2] = {
{
.name = "pxa2xx-flash",
.id = 0,
.dev = {
.platform_data = &mst_flash_data[0],
},
.resource = &flash_resources[0],
.num_resources = 1,
},
{
.name = "pxa2xx-flash",
.id = 1,
.dev = {
.platform_data = &mst_flash_data[1],
},
.resource = &flash_resources[1],
.num_resources = 1,
},
};
#if defined(CONFIG_FB_PXA) || defined(CONFIG_FB_PXA_MODULE)
static struct pwm_lookup mainstone_pwm_lookup[] = {
PWM_LOOKUP("pxa27x-pwm.0", 0, "pwm-backlight.0", NULL, 78770,
PWM_POLARITY_NORMAL),
};
static struct platform_pwm_backlight_data mainstone_backlight_data = {
.max_brightness = 1023,
.dft_brightness = 1023,
.enable_gpio = -1,
};
static struct platform_device mainstone_backlight_device = {
.name = "pwm-backlight",
.dev = {
.parent = &pxa27x_device_pwm0.dev,
.platform_data = &mainstone_backlight_data,
},
};
static void __init mainstone_backlight_register(void)
{
int ret;
pwm_add_table(mainstone_pwm_lookup, ARRAY_SIZE(mainstone_pwm_lookup));
ret = platform_device_register(&mainstone_backlight_device);
if (ret) {
printk(KERN_ERR "mainstone: failed to register backlight device: %d\n", ret);
pwm_remove_table(mainstone_pwm_lookup,
ARRAY_SIZE(mainstone_pwm_lookup));
}
}
#else
#define mainstone_backlight_register() do { } while (0)
#endif
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
.pixclock = 50000,
.xres = 640,
.yres = 480,
.bpp = 16,
.hsync_len = 1,
.left_margin = 0x9f,
.right_margin = 1,
.vsync_len = 44,
.upper_margin = 0,
.lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
};
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
.pixclock = 110000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 8,
.right_margin = 20,
.vsync_len = 3,
.upper_margin = 1,
.lower_margin = 10,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
};
static struct pxafb_mach_info mainstone_pxafb_info = {
.num_modes = 1,
.lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL,
};
static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
{
int err;
/* make sure SD/Memory Stick multiplexer's signals
* are routed to MMC controller
*/
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, 0,
"MMC card detect", data);
if (err)
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return err;
}
static int mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __func__);
MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
} else {
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
return 0;
}
static void mainstone_mci_exit(struct device *dev, void *data)
{
free_irq(MAINSTONE_MMC_IRQ, data);
}
static struct pxamci_platform_data mainstone_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = mainstone_mci_init,
.setpower = mainstone_mci_setpower,
.exit = mainstone_mci_exit,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
{
unsigned long flags;
local_irq_save(flags);
if (mode & IR_SIRMODE) {
MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
} else if (mode & IR_FIRMODE) {
MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
}
pxa2xx_transceiver_mode(dev, mode);
if (mode & IR_OFF) {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
} else {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
}
local_irq_restore(flags);
}
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
.gpio_pwdown = -1,
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = mainstone_irda_transceiver_mode,
};
static struct gpio_keys_button gpio_keys_button[] = {
[0] = {
.desc = "wakeup",
.code = KEY_SUSPEND,
.type = EV_KEY,
.gpio = 1,
.wakeup = 1,
},
};
static struct gpio_keys_platform_data mainstone_gpio_keys = {
.buttons = gpio_keys_button,
.nbuttons = 1,
};
static struct platform_device mst_gpio_keys_device = {
.name = "gpio-keys",
.id = -1,
.dev = {
.platform_data = &mainstone_gpio_keys,
},
};
static struct resource mst_cplds_resources[] = {
[0] = {
.start = MST_FPGA_PHYS + 0xc0,
.end = MST_FPGA_PHYS + 0xe0 - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_GPIO_TO_IRQ(0),
.end = PXA_GPIO_TO_IRQ(0),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_LOWEDGE,
},
[2] = {
.start = MAINSTONE_IRQ(0),
.end = MAINSTONE_IRQ(15),
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device mst_cplds_device = {
.name = "pxa_cplds_irqs",
.id = -1,
.resource = &mst_cplds_resources[0],
.num_resources = 3,
};
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_flash_device[0],
&mst_flash_device[1],
&mst_gpio_keys_device,
&mst_cplds_device,
};
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.flags = ENABLE_PORT_ALL | POWER_CONTROL_LOW | POWER_SENSE_LOW,
};
#if defined(CONFIG_KEYBOARD_PXA27x) || defined(CONFIG_KEYBOARD_PXA27x_MODULE)
static const unsigned int mainstone_matrix_keys[] = {
KEY(0, 0, KEY_A), KEY(1, 0, KEY_B), KEY(2, 0, KEY_C),
KEY(3, 0, KEY_D), KEY(4, 0, KEY_E), KEY(5, 0, KEY_F),
KEY(0, 1, KEY_G), KEY(1, 1, KEY_H), KEY(2, 1, KEY_I),
KEY(3, 1, KEY_J), KEY(4, 1, KEY_K), KEY(5, 1, KEY_L),
KEY(0, 2, KEY_M), KEY(1, 2, KEY_N), KEY(2, 2, KEY_O),
KEY(3, 2, KEY_P), KEY(4, 2, KEY_Q), KEY(5, 2, KEY_R),
KEY(0, 3, KEY_S), KEY(1, 3, KEY_T), KEY(2, 3, KEY_U),
KEY(3, 3, KEY_V), KEY(4, 3, KEY_W), KEY(5, 3, KEY_X),
KEY(2, 4, KEY_Y), KEY(3, 4, KEY_Z),
KEY(0, 4, KEY_DOT), /* . */
KEY(1, 4, KEY_CLOSE), /* @ */
KEY(4, 4, KEY_SLASH),
KEY(5, 4, KEY_BACKSLASH),
KEY(0, 5, KEY_HOME),
KEY(1, 5, KEY_LEFTSHIFT),
KEY(2, 5, KEY_SPACE),
KEY(3, 5, KEY_SPACE),
KEY(4, 5, KEY_ENTER),
KEY(5, 5, KEY_BACKSPACE),
KEY(0, 6, KEY_UP),
KEY(1, 6, KEY_DOWN),
KEY(2, 6, KEY_LEFT),
KEY(3, 6, KEY_RIGHT),
KEY(4, 6, KEY_SELECT),
};
static struct matrix_keymap_data mainstone_matrix_keymap_data = {
.keymap = mainstone_matrix_keys,
.keymap_size = ARRAY_SIZE(mainstone_matrix_keys),
};
struct pxa27x_keypad_platform_data mainstone_keypad_info = {
.matrix_key_rows = 6,
.matrix_key_cols = 7,
.matrix_keymap_data = &mainstone_matrix_keymap_data,
.enable_rotary0 = 1,
.rotary0_up_key = KEY_UP,
.rotary0_down_key = KEY_DOWN,
.debounce_interval = 30,
};
static void __init mainstone_init_keypad(void)
{
pxa_set_keypad_info(&mainstone_keypad_info);
}
#else
static inline void mainstone_init_keypad(void) {}
#endif
static int mst_pcmcia0_irqs[11] = {
[0 ... 10] = -1,
[5] = MAINSTONE_S0_CD_IRQ,
[8] = MAINSTONE_S0_STSCHG_IRQ,
[10] = MAINSTONE_S0_IRQ,
};
static int mst_pcmcia1_irqs[11] = {
[0 ... 10] = -1,
[5] = MAINSTONE_S1_CD_IRQ,
[8] = MAINSTONE_S1_STSCHG_IRQ,
[10] = MAINSTONE_S1_IRQ,
};
static struct gpiod_lookup_table mainstone_pcmcia_gpio_table = {
.dev_id = "pxa2xx-pcmcia",
.table = {
GPIO_LOOKUP("mst-pcmcia0", 0, "a0vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 1, "a1vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 2, "a0vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 3, "a1vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 4, "areset", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 5, "adetect", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia0", 6, "avs1", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia0", 7, "avs2", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia0", 8, "abvd1", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 9, "abvd2", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia0", 10, "aready", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 0, "b0vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 1, "b1vpp", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 2, "b0vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 3, "b1vcc", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 4, "breset", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 5, "bdetect", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia1", 6, "bvs1", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia1", 7, "bvs2", GPIO_ACTIVE_LOW),
GPIO_LOOKUP("mst-pcmcia1", 8, "bbvd1", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 9, "bbvd2", GPIO_ACTIVE_HIGH),
GPIO_LOOKUP("mst-pcmcia1", 10, "bready", GPIO_ACTIVE_HIGH),
{ },
},
};
static void __init mainstone_init(void)
{
int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
/* Register board control register(s) as GPIOs */
gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA0, -1, 11,
"mst-pcmcia0", MST_PCMCIA_INPUTS, 0, NULL,
NULL, mst_pcmcia0_irqs);
gpio_reg_init(NULL, (void __iomem *)&MST_PCMCIA1, -1, 11,
"mst-pcmcia1", MST_PCMCIA_INPUTS, 0, NULL,
NULL, mst_pcmcia1_irqs);
gpiod_add_lookup_table(&mainstone_pcmcia_gpio_table);
pxa_set_ffuart_info(NULL);
pxa_set_btuart_info(NULL);
pxa_set_stuart_info(NULL);
mst_flash_data[0].width = (__raw_readl(BOOT_DEF) & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
/* Compensate for SW7 which swaps the flash banks */
mst_flash_data[SW7].name = "processor-flash";
mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
mst_flash_data[0].name);
/* system bus arbiter setting
* - Core_Park
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
/* reading Mainstone's "Virtual Configuration Register"
might be handy to select LCD type here */
if (0)
mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
else
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
pxa_set_fb_info(NULL, &mainstone_pxafb_info);
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
pxa_set_ficp_info(&mainstone_ficp_platform_data);
pxa_set_ohci_info(&mainstone_ohci_platform_data);
pxa_set_i2c_info(NULL);
pxa_set_ac97_info(&mst_audio_ops);
mainstone_init_keypad();
}
static struct map_desc mainstone_io_desc[] __initdata = {
{ /* CPLD */
.virtual = MST_FPGA_VIRT,
.pfn = __phys_to_pfn(MST_FPGA_PHYS),
.length = 0x00100000,
.type = MT_DEVICE
}
};
static void __init mainstone_map_io(void)
{
pxa27x_map_io();
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
/* for use I SRAM as framebuffer. */
PSLR |= 0xF04;
PCFR = 0x66;
}
/*
* Driver for the 8 discrete LEDs available for general use:
* Note: bits [15-8] are used to enable/blank the 8 7 segment hex displays
* so be sure to not monkey with them here.
*/
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)
struct mainstone_led {
struct led_classdev cdev;
u8 mask;
};
/*
* The triggers lines up below will only be used if the
* LED triggers are compiled in.
*/
static const struct {
const char *name;
const char *trigger;
} mainstone_leds[] = {
{ "mainstone:D28", "default-on", },
{ "mainstone:D27", "cpu0", },
{ "mainstone:D26", "heartbeat" },
{ "mainstone:D25", },
{ "mainstone:D24", },
{ "mainstone:D23", },
{ "mainstone:D22", },
{ "mainstone:D21", },
};
static void mainstone_led_set(struct led_classdev *cdev,
enum led_brightness b)
{
struct mainstone_led *led = container_of(cdev,
struct mainstone_led, cdev);
u32 reg = MST_LEDCTRL;
if (b != LED_OFF)
reg |= led->mask;
else
reg &= ~led->mask;
MST_LEDCTRL = reg;
}
static enum led_brightness mainstone_led_get(struct led_classdev *cdev)
{
struct mainstone_led *led = container_of(cdev,
struct mainstone_led, cdev);
u32 reg = MST_LEDCTRL;
return (reg & led->mask) ? LED_FULL : LED_OFF;
}
static int __init mainstone_leds_init(void)
{
int i;
if (!machine_is_mainstone())
return -ENODEV;
/* All ON */
MST_LEDCTRL |= 0xff;
for (i = 0; i < ARRAY_SIZE(mainstone_leds); i++) {
struct mainstone_led *led;
led = kzalloc(sizeof(*led), GFP_KERNEL);
if (!led)
break;
led->cdev.name = mainstone_leds[i].name;
led->cdev.brightness_set = mainstone_led_set;
led->cdev.brightness_get = mainstone_led_get;
led->cdev.default_trigger = mainstone_leds[i].trigger;
led->mask = BIT(i);
if (led_classdev_register(NULL, &led->cdev) < 0) {
kfree(led);
break;
}
}
return 0;
}
/*
* Since we may have triggers on any subsystem, defer registration
* until after subsystem_init.
*/
fs_initcall(mainstone_leds_init);
#endif
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.atag_offset = 0x100, /* BLOB boot parameter setting */
.map_io = mainstone_map_io,
.nr_irqs = MAINSTONE_NR_IRQS,
.init_irq = pxa27x_init_irq,
.handle_irq = pxa27x_handle_irq,
.init_time = pxa_timer_init,
.init_machine = mainstone_init,
.restart = pxa_restart,
MACHINE_END