linux/drivers/dma/sf-pdma/sf-pdma.h
Green Wan 7d268a28ee dmaengine: sf-pdma: move macro to header file
The place where the macro, SF_PDMA_REG_BASE(), is cause kernel-doc
using wrong function declaration. Move it to header file.

Signed-off-by: Green Wan <green.wan@sifive.com>
Link: https://lore.kernel.org/r/20191118143554.16129-2-green.wan@sifive.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
2019-11-22 11:15:28 +05:30

125 lines
3.0 KiB
C

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* SiFive FU540 Platform DMA driver
* Copyright (C) 2019 SiFive
*
* Based partially on:
* - drivers/dma/fsl-edma.c
* - drivers/dma/dw-edma/
* - drivers/dma/pxa-dma.c
*
* See the following sources for further documentation:
* - Chapter 12 "Platform DMA Engine (PDMA)" of
* SiFive FU540-C000 v1.0
* https://static.dev.sifive.com/FU540-C000-v1.0.pdf
*/
#ifndef _SF_PDMA_H
#define _SF_PDMA_H
#include <linux/dmaengine.h>
#include <linux/dma-direction.h>
#include "../dmaengine.h"
#include "../virt-dma.h"
#define PDMA_NR_CH 4
#if (PDMA_NR_CH != 4)
#error "Please define PDMA_NR_CH to 4"
#endif
#define PDMA_BASE_ADDR 0x3000000
#define PDMA_CHAN_OFFSET 0x1000
/* Register Offset */
#define PDMA_CTRL 0x000
#define PDMA_XFER_TYPE 0x004
#define PDMA_XFER_SIZE 0x008
#define PDMA_DST_ADDR 0x010
#define PDMA_SRC_ADDR 0x018
#define PDMA_ACT_TYPE 0x104 /* Read-only */
#define PDMA_REMAINING_BYTE 0x108 /* Read-only */
#define PDMA_CUR_DST_ADDR 0x110 /* Read-only*/
#define PDMA_CUR_SRC_ADDR 0x118 /* Read-only*/
/* CTRL */
#define PDMA_CLEAR_CTRL 0x0
#define PDMA_CLAIM_MASK GENMASK(0, 0)
#define PDMA_RUN_MASK GENMASK(1, 1)
#define PDMA_ENABLE_DONE_INT_MASK GENMASK(14, 14)
#define PDMA_ENABLE_ERR_INT_MASK GENMASK(15, 15)
#define PDMA_DONE_STATUS_MASK GENMASK(30, 30)
#define PDMA_ERR_STATUS_MASK GENMASK(31, 31)
/* Transfer Type */
#define PDMA_FULL_SPEED 0xFF000008
/* Error Recovery */
#define MAX_RETRY 1
#define SF_PDMA_REG_BASE(ch) (pdma->membase + (PDMA_CHAN_OFFSET * (ch)))
struct pdma_regs {
/* read-write regs */
void __iomem *ctrl; /* 4 bytes */
void __iomem *xfer_type; /* 4 bytes */
void __iomem *xfer_size; /* 8 bytes */
void __iomem *dst_addr; /* 8 bytes */
void __iomem *src_addr; /* 8 bytes */
/* read-only */
void __iomem *act_type; /* 4 bytes */
void __iomem *residue; /* 8 bytes */
void __iomem *cur_dst_addr; /* 8 bytes */
void __iomem *cur_src_addr; /* 8 bytes */
};
struct sf_pdma_desc {
u32 xfer_type;
u64 xfer_size;
u64 dst_addr;
u64 src_addr;
struct virt_dma_desc vdesc;
struct sf_pdma_chan *chan;
bool in_use;
enum dma_transfer_direction dirn;
struct dma_async_tx_descriptor *async_tx;
};
enum sf_pdma_pm_state {
RUNNING = 0,
SUSPENDED,
};
struct sf_pdma_chan {
struct virt_dma_chan vchan;
enum dma_status status;
enum sf_pdma_pm_state pm_state;
u32 slave_id;
struct sf_pdma *pdma;
struct sf_pdma_desc *desc;
struct dma_slave_config cfg;
u32 attr;
dma_addr_t dma_dev_addr;
u32 dma_dev_size;
struct tasklet_struct done_tasklet;
struct tasklet_struct err_tasklet;
struct pdma_regs regs;
spinlock_t lock; /* protect chan data */
bool xfer_err;
int txirq;
int errirq;
int retries;
};
struct sf_pdma {
struct dma_device dma_dev;
void __iomem *membase;
void __iomem *mappedbase;
u32 n_chans;
struct sf_pdma_chan chans[PDMA_NR_CH];
};
#endif /* _SF_PDMA_H */