Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-11 06:31:49 +00:00
Code Issues Packages Projects Releases Wiki Activity
A mirror of the official Linux kernel repository just in case
857,165 Commits 7 Branches 861 Tags 6.5 GiB
C 97.6%
Assembly 1%
Shell 0.5%
Python 0.3%
Makefile 0.3%
74eb9c06b1
Go to file
Greg Kroah-Hartman 74eb9c06b1 Second set of new device support, cleanups and features for IIO in the 5.4 cycle 
Revised pull request to fix up a missing Signed-off-by and roll in
 a fix in the lsm9ds1 support after I broke it when applying.
 Revised again because the fix changed a hash meaning a fix
 that previously followed it now had the wrong fixes tag.
 
 A few fixes in here that could have gone a faster path but aren't quite
 worth the rush for 5.3.
 
 New device support
 * ad7606
   - Support the ad7606b which adds a software controlled mode alongside
     the pin controlled only approach of the ad7606. Including dt-bindings.
 * lsm6dsx
   - Add support for the gyro and accelerometer part of the lsm9ds1 which is
     a compound device also including a magnetometer (st_sensors driver).
     Includes bindings and precursor rework of the driver.
 
 Features
 * ad7192
   - Add support for low pass filter control.
   - DT binding docs.
 
 Cleanups and minor fixes
 * MAINTAINERS
   - Fix a typo in a path.
   - Add entry for ad7606
 * ad5380
   - Fix a failure to dereference a pointer before atempting to assign the
     value.
 * ad7192
   - Drop platform data as not used in mainline and we now have full DT bindings.
 * ad7606
   - YAML conversion for dt-bindings.
 * adis16240
   - Rework write_raw to make it more readable using GENMASK.
 * adis16460
   - Fix and issue with an unsigned variable holding potential negatives.
 * cros_ec
   - Fix missing default of calibration vector so that we get 'something'
     before calibration is complete on a given axis.
 * hid-sensors
   - Use int_pow instead of opencoding.
 * isl29501
   - rename dt-binding docs to include renesas inline with other renesas parts
     and general current convention.
 * kxcjk1013
   - Improve comments on the 'unusual' ACPI ids used to identify which sensor
     is which in certain laptops.
 * lsm6dsx
   - Add one bit to the fifo status masks for a number of parts.
   - Drop a reserved entry from the sensitivity values to tidy up interface.
   - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
     to relate to the datasheet and consistent with other parts supported.
 * max1027
   - Use device managed APIs to avoid manual error handling and cleanup.
 * rfd77402
   - Typo in Kconfig help.
 * sc27xx
   - Switch to polling mode from interrupts as interrupt handling typically
     to slow for very short sleeps.
 * st-sensors
   - Fix some missing selects for regmap.
 * tools
   - Add a .gitignore containing the binary outputs.
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEEbilms4eEBlKRJoGxVIU0mcT0FogFAl1uyTgRHGppYzIzQGtl
 cm5lbC5vcmcACgkQVIU0mcT0Foideg//fknN/aM40zRZlClkWx9XqUsByS/3XUAl
 dZL//5DGh566D8/auBeacQxt6SzOFRpj2XwWI/K8mGJi39y9LFOywOn4dDgOBh3x
 VWe/1eCNFg9Y1eMCXncYHBtxxobuV3UKEjVtYFtzg210HP/KM6C3fWdPTpmj1zNZ
 PYSnKGiBGxeJHMCUjN0QweifIRvTy0MLkxPc9CUHcFq0XiMD2enI4TwHYuZ/CNQw
 oisDPPksbPTW5R547vLEnQe/p16MtoFMX57yehbzKIp6qYBEVR+D5ne5kxct8x80
 Ma7YVWLyWTxYF/MwLi3felIniEeyYhgTFVhy2rhZGt6eKDmNFTwTrJG5iTweeHQm
 3FJPbZ04lDjE3RhoETGDc2aSqY5/Xy1nnOJcMjZ1twbDxPGmN2/rCP3YxYRmGL/P
 VCsCZYeQF6cKi7FyFiViqALTPH0k/Ebklol1f/IG8CuFCs8r/m6kKMeSJX3+miHZ
 gIxA2lX5uj8FIiB1bZxORN76W5PzxLji5IiCPy1KtlBin3E3oWM3nQLXNHpzp2Fw
 5A8IyHb/qDoKnO1MlTkprIxdIzKqV4gtWqkY1kTBYyNyreMP/dsiw/lC1rnzWMm/
 v7JHuTbO/Ay5gvT58goK7FD77CyvRTvy3bmi7PNkWJyogWpnRTLiPusMDz7FwxK4
 Ffrbi7+qijk=
 =rPVR
 -----END PGP SIGNATURE-----

Merge tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of new device support, cleanups and features for IIO in the 5.4 cycle

Revised pull request to fix up a missing Signed-off-by and roll in
a fix in the lsm9ds1 support after I broke it when applying.
Revised again because the fix changed a hash meaning a fix
that previously followed it now had the wrong fixes tag.

A few fixes in here that could have gone a faster path but aren't quite
worth the rush for 5.3.

New device support
* ad7606
  - Support the ad7606b which adds a software controlled mode alongside
    the pin controlled only approach of the ad7606. Including dt-bindings.
* lsm6dsx
  - Add support for the gyro and accelerometer part of the lsm9ds1 which is
    a compound device also including a magnetometer (st_sensors driver).
    Includes bindings and precursor rework of the driver.

Features
* ad7192
  - Add support for low pass filter control.
  - DT binding docs.

Cleanups and minor fixes
* MAINTAINERS
  - Fix a typo in a path.
  - Add entry for ad7606
* ad5380
  - Fix a failure to dereference a pointer before atempting to assign the
    value.
* ad7192
  - Drop platform data as not used in mainline and we now have full DT bindings.
* ad7606
  - YAML conversion for dt-bindings.
* adis16240
  - Rework write_raw to make it more readable using GENMASK.
* adis16460
  - Fix and issue with an unsigned variable holding potential negatives.
* cros_ec
  - Fix missing default of calibration vector so that we get 'something'
    before calibration is complete on a given axis.
* hid-sensors
  - Use int_pow instead of opencoding.
* isl29501
  - rename dt-binding docs to include renesas inline with other renesas parts
    and general current convention.
* kxcjk1013
  - Improve comments on the 'unusual' ACPI ids used to identify which sensor
    is which in certain laptops.
* lsm6dsx
  - Add one bit to the fifo status masks for a number of parts.
  - Drop a reserved entry from the sensitivity values to tidy up interface.
  - Use core conversion macro from G to m/s^2 for lsm9ds1 to make it easier
    to relate to the datasheet and consistent with other parts supported.
* max1027
  - Use device managed APIs to avoid manual error handling and cleanup.
* rfd77402
  - Typo in Kconfig help.
* sc27xx
  - Switch to polling mode from interrupts as interrupt handling typically
    to slow for very short sleeps.
* st-sensors
  - Fix some missing selects for regmap.
* tools
  - Add a .gitignore containing the binary outputs.

* tag 'iio-for-5.4b-take3' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio: (27 commits)
  iio: imu: st_lsm6dsx: rely on IIO_G_TO_M_S_2 for gain definition for LSM9DS1
  iio: imu: st_lsm6dsx: remove invalid gain value for LSM9DS1
  iio: cros_ec: set calibscale for 3d MEMS to unit vector
  iio: dac: ad5380: fix incorrect assignment to val
  iio: imu: st_lsm6dsx: Fix FIFO diff mask for tagged fifo
  dt-bindings: iio: imu: st_lsm6dsx: add lsm9ds1 device bindings
  iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1
  iio: imu: st_lsm6dsx: move register definitions to sensor_settings struct
  iio: imu: st_lsm6dsx: introduce update_fifo function pointer
  dt-bindings: iio: light: isl29501: Rename bindings documentation file
  Kconfig: Fix the reference to the RFD77402 ToF sensor in the 'help' section
  iio: st_sensors: Fix build error
  dt-bindings: iio: adc: Add AD7606B ADC documentation
  dt-bindings: iio: adc: Migrate AD7606 documentation to yaml
  MAINTAINERS: Add Beniamin Bia for AD7606 driver
  iio: adc: ad7606: Add support for AD7606B ADC
  tools: iio: add .gitignore
  iio: adc: sc27xx: Change to polling mode to read data
  iio: hid-sensor-attributes: Convert to use int_pow()
  iio: adc: max1027: Use device-managed APIs
  ...
2019-09-03 22:27:46 +02:00
arch Merge branch 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 2019-08-18 09:45:42 -07:00
block block: remove REQ_NOWAIT_INLINE 2019-08-15 11:09:16 -06:00
certs Revert "Merge tag 'keys-acl-20190703' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs" 2019-07-10 18:43:43 -07:00
crypto USB / PHY patches for 5.3-rc1 2019-07-11 15:40:06 -07:00
Documentation Second set of new device support, cleanups and features for IIO in the 5.4 cycle 2019-09-03 22:27:46 +02:00
drivers Second set of new device support, cleanups and features for IIO in the 5.4 cycle 2019-09-03 22:27:46 +02:00
fs erofs: reduntant assignment in __erofs_get_meta_page() 2019-08-30 09:02:10 +02:00
include staging: greybus: fix more header declarations 2019-08-28 17:24:22 +02:00
init Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2019-07-19 10:42:02 -07:00
ipc Merge branch 'work.mount0' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs 2019-07-19 10:42:02 -07:00
kernel SPDX fixes for 5.3-rc5 2019-08-18 09:26:16 -07:00
lib Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2019-08-06 17:11:59 -07:00
LICENSES LICENSES: Rename other to deprecated 2019-05-03 06:34:32 -06:00
mm hugetlbfs: fix hugetlb page migration/fault race causing SIGBUS 2019-08-13 16:06:53 -07:00
net net: dsa: sja1105: Fix memory leak on meta state machine error path 2019-08-06 14:37:02 -07:00
samples auxdisplay: Fix a typo in cfag12864b-example.c 2019-08-08 20:00:18 +02:00
scripts SPDX fixes for 5.3-rc5 2019-08-18 09:26:16 -07:00
security KEYS: trusted: allow module init if TPM is inactive or deactivated 2019-08-13 19:59:23 +03:00
sound sound fixes for 5.3-rc5 2019-08-16 08:49:45 -07:00
tools Second set of new device support, cleanups and features for IIO in the 5.4 cycle 2019-09-03 22:27:46 +02:00
usr kbuild: enable arch/s390/include/uapi/asm/zcrypt.h for uapi header test 2019-07-23 10:45:46 +02:00
virt KVM/arm fixes for 5.3, take #2 2019-08-09 16:53:50 +02:00
.clang-format Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-04-17 11:26:25 -07:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes
.gitignore .gitignore: Add compilation database file 2019-07-27 12:18:19 +09:00
.mailmap MAINTAINERS: Update my email address 2019-07-22 14:57:50 +01:00
COPYING COPYING: use the new text with points to the license files 2018-03-23 12:41:45 -06:00
CREDITS Remove references to dead website. 2019-07-19 12:22:04 -07:00
Kbuild Kbuild updates for v5.1 2019-03-10 17:48:21 -07:00
Kconfig docs: kbuild: convert docs to ReST and rename to *.rst 2019-06-14 14:21:21 -06:00
MAINTAINERS Second set of new device support, cleanups and features for IIO in the 5.4 cycle 2019-09-03 22:27:46 +02:00
Makefile Linux 5.3-rc5 2019-08-18 14:31:08 -07:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00

README 

Linux kernel
============

There are several guides for kernel developers and users. These guides can
be rendered in a number of formats, like HTML and PDF. Please read
Documentation/admin-guide/README.rst first.

In order to build the documentation, use ``make htmldocs`` or
``make pdfdocs``.  The formatted documentation can also be read online at:

    https://www.kernel.org/doc/html/latest/

There are various text files in the Documentation/ subdirectory,
several of them using the Restructured Text markup notation.

Please read the Documentation/process/changes.rst file, as it contains the
requirements for building and running the kernel, and information about
the problems which may result by upgrading your kernel.