linux/arch/x86/mm/k8topology_64.c
David Rientjes 8ee2debce3 x86: Export k8 physical topology
To eventually interleave emulated nodes over physical nodes, we
need to know the physical topology of the machine without actually
registering it.  This does the k8 node setup in two parts:
detection and registration.  NUMA emulation can then used the
physical topology detected to setup the address ranges of emulated
nodes accordingly.  If emulation isn't used, the k8 nodes are
registered as normal.

Two formals are added to the x86 NUMA setup functions: `acpi' and
`k8'. These represent whether ACPI or K8 NUMA has been detected;
both cannot be true at the same time.  This specifies to the NUMA
emulation code whether an underlying physical NUMA topology exists
and which interface to use.

This patch deals solely with separating the k8 setup path into
Northbridge detection and registration steps and leaves the ACPI
changes for a subsequent patch.  The `acpi' formal is added here,
however, to avoid touching all the header files again in the next
patch.

This approach also ensures emulated nodes will not span physical
nodes so the true memory latency is not misrepresented.

k8_get_nodes() may now be used to export the k8 physical topology
of the machine for NUMA emulation.

Signed-off-by: David Rientjes <rientjes@google.com>
Cc: Andreas Herrmann <andreas.herrmann3@amd.com>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: Balbir Singh <balbir@linux.vnet.ibm.com>
Cc: Ankita Garg <ankita@in.ibm.com>
Cc: Len Brown <len.brown@intel.com>
LKML-Reference: <alpine.DEB.1.00.0909251518400.14754@chino.kir.corp.google.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-10-12 22:56:45 +02:00

248 lines
5.2 KiB
C

/*
* AMD K8 NUMA support.
* Discover the memory map and associated nodes.
*
* This version reads it directly from the K8 northbridge.
*
* Copyright 2002,2003 Andi Kleen, SuSE Labs.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/string.h>
#include <linux/module.h>
#include <linux/nodemask.h>
#include <asm/io.h>
#include <linux/pci_ids.h>
#include <linux/acpi.h>
#include <asm/types.h>
#include <asm/mmzone.h>
#include <asm/proto.h>
#include <asm/e820.h>
#include <asm/pci-direct.h>
#include <asm/numa.h>
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <asm/k8.h>
static struct bootnode __initdata nodes[8];
static nodemask_t __initdata nodes_parsed = NODE_MASK_NONE;
static __init int find_northbridge(void)
{
int num;
for (num = 0; num < 32; num++) {
u32 header;
header = read_pci_config(0, num, 0, 0x00);
if (header != (PCI_VENDOR_ID_AMD | (0x1100<<16)) &&
header != (PCI_VENDOR_ID_AMD | (0x1200<<16)) &&
header != (PCI_VENDOR_ID_AMD | (0x1300<<16)))
continue;
header = read_pci_config(0, num, 1, 0x00);
if (header != (PCI_VENDOR_ID_AMD | (0x1101<<16)) &&
header != (PCI_VENDOR_ID_AMD | (0x1201<<16)) &&
header != (PCI_VENDOR_ID_AMD | (0x1301<<16)))
continue;
return num;
}
return -1;
}
static __init void early_get_boot_cpu_id(void)
{
/*
* need to get boot_cpu_id so can use that to create apicid_to_node
* in k8_scan_nodes()
*/
/*
* Find possible boot-time SMP configuration:
*/
#ifdef CONFIG_X86_MPPARSE
early_find_smp_config();
#endif
#ifdef CONFIG_ACPI
/*
* Read APIC information from ACPI tables.
*/
early_acpi_boot_init();
#endif
#ifdef CONFIG_X86_MPPARSE
/*
* get boot-time SMP configuration:
*/
if (smp_found_config)
early_get_smp_config();
#endif
early_init_lapic_mapping();
}
int __init k8_get_nodes(struct bootnode *physnodes)
{
int i;
int ret = 0;
for_each_node_mask(i, nodes_parsed) {
physnodes[ret].start = nodes[i].start;
physnodes[ret].end = nodes[i].end;
ret++;
}
return ret;
}
int __init k8_numa_init(unsigned long start_pfn, unsigned long end_pfn)
{
unsigned long start = PFN_PHYS(start_pfn);
unsigned long end = PFN_PHYS(end_pfn);
unsigned numnodes;
unsigned long prevbase;
int i, nb, found = 0;
u32 nodeid, reg;
if (!early_pci_allowed())
return -1;
nb = find_northbridge();
if (nb < 0)
return nb;
pr_info("Scanning NUMA topology in Northbridge %d\n", nb);
reg = read_pci_config(0, nb, 0, 0x60);
numnodes = ((reg >> 4) & 0xF) + 1;
if (numnodes <= 1)
return -1;
pr_info("Number of physical nodes %d\n", numnodes);
prevbase = 0;
for (i = 0; i < 8; i++) {
unsigned long base, limit;
base = read_pci_config(0, nb, 1, 0x40 + i*8);
limit = read_pci_config(0, nb, 1, 0x44 + i*8);
nodeid = limit & 7;
if ((base & 3) == 0) {
if (i < numnodes)
pr_info("Skipping disabled node %d\n", i);
continue;
}
if (nodeid >= numnodes) {
pr_info("Ignoring excess node %d (%lx:%lx)\n", nodeid,
base, limit);
continue;
}
if (!limit) {
pr_info("Skipping node entry %d (base %lx)\n",
i, base);
continue;
}
if ((base >> 8) & 3 || (limit >> 8) & 3) {
pr_err("Node %d using interleaving mode %lx/%lx\n",
nodeid, (base >> 8) & 3, (limit >> 8) & 3);
return -1;
}
if (node_isset(nodeid, nodes_parsed)) {
pr_info("Node %d already present, skipping\n",
nodeid);
continue;
}
limit >>= 16;
limit <<= 24;
limit |= (1<<24)-1;
limit++;
if (limit > end)
limit = end;
if (limit <= base)
continue;
base >>= 16;
base <<= 24;
if (base < start)
base = start;
if (limit > end)
limit = end;
if (limit == base) {
pr_err("Empty node %d\n", nodeid);
continue;
}
if (limit < base) {
pr_err("Node %d bogus settings %lx-%lx.\n",
nodeid, base, limit);
continue;
}
/* Could sort here, but pun for now. Should not happen anyroads. */
if (prevbase > base) {
pr_err("Node map not sorted %lx,%lx\n",
prevbase, base);
return -1;
}
pr_info("Node %d MemBase %016lx Limit %016lx\n",
nodeid, base, limit);
found++;
nodes[nodeid].start = base;
nodes[nodeid].end = limit;
prevbase = base;
node_set(nodeid, nodes_parsed);
}
if (!found)
return -1;
return 0;
}
int __init k8_scan_nodes(void)
{
unsigned int bits;
unsigned int cores;
unsigned int apicid_base;
int i;
BUG_ON(nodes_empty(nodes_parsed));
node_possible_map = nodes_parsed;
memnode_shift = compute_hash_shift(nodes, 8, NULL);
if (memnode_shift < 0) {
pr_err("No NUMA node hash function found. Contact maintainer\n");
return -1;
}
pr_info("Using node hash shift of %d\n", memnode_shift);
/* use the coreid bits from early_identify_cpu */
bits = boot_cpu_data.x86_coreid_bits;
cores = (1<<bits);
apicid_base = 0;
/* need to get boot_cpu_id early for system with apicid lifting */
early_get_boot_cpu_id();
if (boot_cpu_physical_apicid > 0) {
pr_info("BSP APIC ID: %02x\n", boot_cpu_physical_apicid);
apicid_base = boot_cpu_physical_apicid;
}
for_each_node_mask(i, node_possible_map) {
int j;
e820_register_active_regions(i,
nodes[i].start >> PAGE_SHIFT,
nodes[i].end >> PAGE_SHIFT);
for (j = apicid_base; j < cores + apicid_base; j++)
apicid_to_node[(i << bits) + j] = i;
setup_node_bootmem(i, nodes[i].start, nodes[i].end);
}
numa_init_array();
return 0;
}