mirror of
https://github.com/torvalds/linux.git
synced 2024-11-10 22:21:40 +00:00
5873d380f4
Starting from HW version 3.2 the IRQ_ENABLE bit has moved to the IRQ_i_CFG register and requires a change of the driver to avoid writing into an undefined register address. Get the HW version from registers and set the IRQ_ENABLE bit to the correct register depending on the HW version. Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reviewed-by: Maulik Shah <quic_mkshah@quicinc.com> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org> Acked-by: Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20230905-topic-sm8x50-upstream-pdc-ver-v4-1-fc633c7df84b@linaro.org
374 lines
9.4 KiB
C
374 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2017-2019, The Linux Foundation. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/irqchip.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/soc/qcom/irq.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/types.h>
|
|
|
|
#define PDC_MAX_GPIO_IRQS 256
|
|
|
|
/* Valid only on HW version < 3.2 */
|
|
#define IRQ_ENABLE_BANK 0x10
|
|
#define IRQ_i_CFG 0x110
|
|
|
|
/* Valid only on HW version >= 3.2 */
|
|
#define IRQ_i_CFG_IRQ_ENABLE 3
|
|
|
|
#define IRQ_i_CFG_TYPE_MASK GENMASK(2, 0)
|
|
|
|
#define PDC_VERSION_REG 0x1000
|
|
|
|
/* Notable PDC versions */
|
|
#define PDC_VERSION_3_2 0x30200
|
|
|
|
struct pdc_pin_region {
|
|
u32 pin_base;
|
|
u32 parent_base;
|
|
u32 cnt;
|
|
};
|
|
|
|
#define pin_to_hwirq(r, p) ((r)->parent_base + (p) - (r)->pin_base)
|
|
|
|
static DEFINE_RAW_SPINLOCK(pdc_lock);
|
|
static void __iomem *pdc_base;
|
|
static struct pdc_pin_region *pdc_region;
|
|
static int pdc_region_cnt;
|
|
static unsigned int pdc_version;
|
|
|
|
static void pdc_reg_write(int reg, u32 i, u32 val)
|
|
{
|
|
writel_relaxed(val, pdc_base + reg + i * sizeof(u32));
|
|
}
|
|
|
|
static u32 pdc_reg_read(int reg, u32 i)
|
|
{
|
|
return readl_relaxed(pdc_base + reg + i * sizeof(u32));
|
|
}
|
|
|
|
static void __pdc_enable_intr(int pin_out, bool on)
|
|
{
|
|
unsigned long enable;
|
|
|
|
if (pdc_version < PDC_VERSION_3_2) {
|
|
u32 index, mask;
|
|
|
|
index = pin_out / 32;
|
|
mask = pin_out % 32;
|
|
|
|
enable = pdc_reg_read(IRQ_ENABLE_BANK, index);
|
|
__assign_bit(mask, &enable, on);
|
|
pdc_reg_write(IRQ_ENABLE_BANK, index, enable);
|
|
} else {
|
|
enable = pdc_reg_read(IRQ_i_CFG, pin_out);
|
|
__assign_bit(IRQ_i_CFG_IRQ_ENABLE, &enable, on);
|
|
pdc_reg_write(IRQ_i_CFG, pin_out, enable);
|
|
}
|
|
}
|
|
|
|
static void pdc_enable_intr(struct irq_data *d, bool on)
|
|
{
|
|
unsigned long flags;
|
|
|
|
raw_spin_lock_irqsave(&pdc_lock, flags);
|
|
__pdc_enable_intr(d->hwirq, on);
|
|
raw_spin_unlock_irqrestore(&pdc_lock, flags);
|
|
}
|
|
|
|
static void qcom_pdc_gic_disable(struct irq_data *d)
|
|
{
|
|
pdc_enable_intr(d, false);
|
|
irq_chip_disable_parent(d);
|
|
}
|
|
|
|
static void qcom_pdc_gic_enable(struct irq_data *d)
|
|
{
|
|
pdc_enable_intr(d, true);
|
|
irq_chip_enable_parent(d);
|
|
}
|
|
|
|
/*
|
|
* GIC does not handle falling edge or active low. To allow falling edge and
|
|
* active low interrupts to be handled at GIC, PDC has an inverter that inverts
|
|
* falling edge into a rising edge and active low into an active high.
|
|
* For the inverter to work, the polarity bit in the IRQ_CONFIG register has to
|
|
* set as per the table below.
|
|
* Level sensitive active low LOW
|
|
* Rising edge sensitive NOT USED
|
|
* Falling edge sensitive LOW
|
|
* Dual Edge sensitive NOT USED
|
|
* Level sensitive active High HIGH
|
|
* Falling Edge sensitive NOT USED
|
|
* Rising edge sensitive HIGH
|
|
* Dual Edge sensitive HIGH
|
|
*/
|
|
enum pdc_irq_config_bits {
|
|
PDC_LEVEL_LOW = 0b000,
|
|
PDC_EDGE_FALLING = 0b010,
|
|
PDC_LEVEL_HIGH = 0b100,
|
|
PDC_EDGE_RISING = 0b110,
|
|
PDC_EDGE_DUAL = 0b111,
|
|
};
|
|
|
|
/**
|
|
* qcom_pdc_gic_set_type: Configure PDC for the interrupt
|
|
*
|
|
* @d: the interrupt data
|
|
* @type: the interrupt type
|
|
*
|
|
* If @type is edge triggered, forward that as Rising edge as PDC
|
|
* takes care of converting falling edge to rising edge signal
|
|
* If @type is level, then forward that as level high as PDC
|
|
* takes care of converting falling edge to rising edge signal
|
|
*/
|
|
static int qcom_pdc_gic_set_type(struct irq_data *d, unsigned int type)
|
|
{
|
|
enum pdc_irq_config_bits pdc_type;
|
|
enum pdc_irq_config_bits old_pdc_type;
|
|
int ret;
|
|
|
|
switch (type) {
|
|
case IRQ_TYPE_EDGE_RISING:
|
|
pdc_type = PDC_EDGE_RISING;
|
|
break;
|
|
case IRQ_TYPE_EDGE_FALLING:
|
|
pdc_type = PDC_EDGE_FALLING;
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
break;
|
|
case IRQ_TYPE_EDGE_BOTH:
|
|
pdc_type = PDC_EDGE_DUAL;
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_HIGH:
|
|
pdc_type = PDC_LEVEL_HIGH;
|
|
break;
|
|
case IRQ_TYPE_LEVEL_LOW:
|
|
pdc_type = PDC_LEVEL_LOW;
|
|
type = IRQ_TYPE_LEVEL_HIGH;
|
|
break;
|
|
default:
|
|
WARN_ON(1);
|
|
return -EINVAL;
|
|
}
|
|
|
|
old_pdc_type = pdc_reg_read(IRQ_i_CFG, d->hwirq);
|
|
pdc_type |= (old_pdc_type & ~IRQ_i_CFG_TYPE_MASK);
|
|
pdc_reg_write(IRQ_i_CFG, d->hwirq, pdc_type);
|
|
|
|
ret = irq_chip_set_type_parent(d, type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* When we change types the PDC can give a phantom interrupt.
|
|
* Clear it. Specifically the phantom shows up when reconfiguring
|
|
* polarity of interrupt without changing the state of the signal
|
|
* but let's be consistent and clear it always.
|
|
*
|
|
* Doing this works because we have IRQCHIP_SET_TYPE_MASKED so the
|
|
* interrupt will be cleared before the rest of the system sees it.
|
|
*/
|
|
if (old_pdc_type != pdc_type)
|
|
irq_chip_set_parent_state(d, IRQCHIP_STATE_PENDING, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct irq_chip qcom_pdc_gic_chip = {
|
|
.name = "PDC",
|
|
.irq_eoi = irq_chip_eoi_parent,
|
|
.irq_mask = irq_chip_mask_parent,
|
|
.irq_unmask = irq_chip_unmask_parent,
|
|
.irq_disable = qcom_pdc_gic_disable,
|
|
.irq_enable = qcom_pdc_gic_enable,
|
|
.irq_get_irqchip_state = irq_chip_get_parent_state,
|
|
.irq_set_irqchip_state = irq_chip_set_parent_state,
|
|
.irq_retrigger = irq_chip_retrigger_hierarchy,
|
|
.irq_set_type = qcom_pdc_gic_set_type,
|
|
.flags = IRQCHIP_MASK_ON_SUSPEND |
|
|
IRQCHIP_SET_TYPE_MASKED |
|
|
IRQCHIP_SKIP_SET_WAKE |
|
|
IRQCHIP_ENABLE_WAKEUP_ON_SUSPEND,
|
|
.irq_set_vcpu_affinity = irq_chip_set_vcpu_affinity_parent,
|
|
.irq_set_affinity = irq_chip_set_affinity_parent,
|
|
};
|
|
|
|
static struct pdc_pin_region *get_pin_region(int pin)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < pdc_region_cnt; i++) {
|
|
if (pin >= pdc_region[i].pin_base &&
|
|
pin < pdc_region[i].pin_base + pdc_region[i].cnt)
|
|
return &pdc_region[i];
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int qcom_pdc_alloc(struct irq_domain *domain, unsigned int virq,
|
|
unsigned int nr_irqs, void *data)
|
|
{
|
|
struct irq_fwspec *fwspec = data;
|
|
struct irq_fwspec parent_fwspec;
|
|
struct pdc_pin_region *region;
|
|
irq_hw_number_t hwirq;
|
|
unsigned int type;
|
|
int ret;
|
|
|
|
ret = irq_domain_translate_twocell(domain, fwspec, &hwirq, &type);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (hwirq == GPIO_NO_WAKE_IRQ)
|
|
return irq_domain_disconnect_hierarchy(domain, virq);
|
|
|
|
ret = irq_domain_set_hwirq_and_chip(domain, virq, hwirq,
|
|
&qcom_pdc_gic_chip, NULL);
|
|
if (ret)
|
|
return ret;
|
|
|
|
region = get_pin_region(hwirq);
|
|
if (!region)
|
|
return irq_domain_disconnect_hierarchy(domain->parent, virq);
|
|
|
|
if (type & IRQ_TYPE_EDGE_BOTH)
|
|
type = IRQ_TYPE_EDGE_RISING;
|
|
|
|
if (type & IRQ_TYPE_LEVEL_MASK)
|
|
type = IRQ_TYPE_LEVEL_HIGH;
|
|
|
|
parent_fwspec.fwnode = domain->parent->fwnode;
|
|
parent_fwspec.param_count = 3;
|
|
parent_fwspec.param[0] = 0;
|
|
parent_fwspec.param[1] = pin_to_hwirq(region, hwirq);
|
|
parent_fwspec.param[2] = type;
|
|
|
|
return irq_domain_alloc_irqs_parent(domain, virq, nr_irqs,
|
|
&parent_fwspec);
|
|
}
|
|
|
|
static const struct irq_domain_ops qcom_pdc_ops = {
|
|
.translate = irq_domain_translate_twocell,
|
|
.alloc = qcom_pdc_alloc,
|
|
.free = irq_domain_free_irqs_common,
|
|
};
|
|
|
|
static int pdc_setup_pin_mapping(struct device_node *np)
|
|
{
|
|
int ret, n, i;
|
|
|
|
n = of_property_count_elems_of_size(np, "qcom,pdc-ranges", sizeof(u32));
|
|
if (n <= 0 || n % 3)
|
|
return -EINVAL;
|
|
|
|
pdc_region_cnt = n / 3;
|
|
pdc_region = kcalloc(pdc_region_cnt, sizeof(*pdc_region), GFP_KERNEL);
|
|
if (!pdc_region) {
|
|
pdc_region_cnt = 0;
|
|
return -ENOMEM;
|
|
}
|
|
|
|
for (n = 0; n < pdc_region_cnt; n++) {
|
|
ret = of_property_read_u32_index(np, "qcom,pdc-ranges",
|
|
n * 3 + 0,
|
|
&pdc_region[n].pin_base);
|
|
if (ret)
|
|
return ret;
|
|
ret = of_property_read_u32_index(np, "qcom,pdc-ranges",
|
|
n * 3 + 1,
|
|
&pdc_region[n].parent_base);
|
|
if (ret)
|
|
return ret;
|
|
ret = of_property_read_u32_index(np, "qcom,pdc-ranges",
|
|
n * 3 + 2,
|
|
&pdc_region[n].cnt);
|
|
if (ret)
|
|
return ret;
|
|
|
|
for (i = 0; i < pdc_region[n].cnt; i++)
|
|
__pdc_enable_intr(i + pdc_region[n].pin_base, 0);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define QCOM_PDC_SIZE 0x30000
|
|
|
|
static int qcom_pdc_init(struct device_node *node, struct device_node *parent)
|
|
{
|
|
struct irq_domain *parent_domain, *pdc_domain;
|
|
resource_size_t res_size;
|
|
struct resource res;
|
|
int ret;
|
|
|
|
/* compat with old sm8150 DT which had very small region for PDC */
|
|
if (of_address_to_resource(node, 0, &res))
|
|
return -EINVAL;
|
|
|
|
res_size = max_t(resource_size_t, resource_size(&res), QCOM_PDC_SIZE);
|
|
if (res_size > resource_size(&res))
|
|
pr_warn("%pOF: invalid reg size, please fix DT\n", node);
|
|
|
|
pdc_base = ioremap(res.start, res_size);
|
|
if (!pdc_base) {
|
|
pr_err("%pOF: unable to map PDC registers\n", node);
|
|
return -ENXIO;
|
|
}
|
|
|
|
pdc_version = pdc_reg_read(PDC_VERSION_REG, 0);
|
|
|
|
parent_domain = irq_find_host(parent);
|
|
if (!parent_domain) {
|
|
pr_err("%pOF: unable to find PDC's parent domain\n", node);
|
|
ret = -ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
ret = pdc_setup_pin_mapping(node);
|
|
if (ret) {
|
|
pr_err("%pOF: failed to init PDC pin-hwirq mapping\n", node);
|
|
goto fail;
|
|
}
|
|
|
|
pdc_domain = irq_domain_create_hierarchy(parent_domain,
|
|
IRQ_DOMAIN_FLAG_QCOM_PDC_WAKEUP,
|
|
PDC_MAX_GPIO_IRQS,
|
|
of_fwnode_handle(node),
|
|
&qcom_pdc_ops, NULL);
|
|
if (!pdc_domain) {
|
|
pr_err("%pOF: PDC domain add failed\n", node);
|
|
ret = -ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
irq_domain_update_bus_token(pdc_domain, DOMAIN_BUS_WAKEUP);
|
|
|
|
return 0;
|
|
|
|
fail:
|
|
kfree(pdc_region);
|
|
iounmap(pdc_base);
|
|
return ret;
|
|
}
|
|
|
|
IRQCHIP_PLATFORM_DRIVER_BEGIN(qcom_pdc)
|
|
IRQCHIP_MATCH("qcom,pdc", qcom_pdc_init)
|
|
IRQCHIP_PLATFORM_DRIVER_END(qcom_pdc)
|
|
MODULE_DESCRIPTION("Qualcomm Technologies, Inc. Power Domain Controller");
|
|
MODULE_LICENSE("GPL v2");
|