..
include /mach
TI Davinci EMAC : Re-use driver for other platforms.
2010-02-04 13:29:50 -08:00
board-da830-evm.c
davinci: da8xx/omapl1: add support for the second sysconfig module
2010-02-04 13:29:32 -08:00
board-da850-evm.c
davinci: da850/omap-l138: Enable 4-bit ecc
2010-02-04 13:29:49 -08:00
board-dm355-evm.c
Davinci VPFE Capture: Take i2c adapter id through platform data
2010-01-06 08:57:43 -08:00
board-dm355-leopard.c
DaVinci: rename setup_usb() to davinci_setup_usb()
2009-11-25 10:21:33 -08:00
board-dm365-evm.c
DaVinci - Adding platform & board changes for vpfe capture on DM365
2010-02-04 13:28:46 -08:00
board-dm644x-evm.c
Davinci VPFE Capture: Take i2c adapter id through platform data
2010-01-06 08:57:43 -08:00
board-dm646x-evm.c
davinci: add support for DM6467T EVM
2010-02-04 13:29:44 -08:00
board-neuros-osd2.c
davinci: Initial support for Neuros OSD2 platform.
2009-11-25 10:21:39 -08:00
board-sffsdr.c
davinci: remove unused variable in arch/arm/mach-davinci/board-sffsdr.c
2009-11-25 10:21:38 -08:00
clock.c
davinci: clock: Check CLK_PSC flag before disabling PSC
2010-02-04 13:29:53 -08:00
clock.h
davinci: make it possible to include clock.h and psc.h in assembly code
2010-02-04 13:29:37 -08:00
common.c
TI Davinci EMAC : Re-use driver for other platforms.
2010-02-04 13:29:50 -08:00
cp_intc.c
davinci: cp_intc: provide set_wake function
2010-01-06 08:57:44 -08:00
cpufreq.c
davinci: DA850/OMAP-L138: avoid using separate initcall for initializing regulator
2009-11-25 10:21:37 -08:00
cpuidle.c
davinci: cpuidle: move mapping of DDR2 controller registers out of driver
2010-02-04 13:29:38 -08:00
da830.c
davinci: da8xx/omapl1: add support for the second sysconfig module
2010-02-04 13:29:32 -08:00
da850.c
davinci: da850/omap-l138: create static map for SRAM
2010-02-04 13:29:40 -08:00
devices-da8xx.c
davinci: cpuidle: move mapping of DDR2 controller registers out of driver
2010-02-04 13:29:38 -08:00
devices.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
dm355.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
dm365.c
DaVinci: DM365: Changing default queue for DM365.
2010-02-04 13:29:54 -08:00
dm644x.c
davinci: Initial support for Neuros OSD2 platform.
2009-11-25 10:21:39 -08:00
dm646x.c
davinci: add support for DM6467T EVM
2010-02-04 13:29:44 -08:00
dma.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
gpio.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
io.c
davinci: Encapsulate SoC-specific data in a structure
2009-05-26 08:14:04 -07:00
irq.c
davinci: Move interrupt ctlr info to SoC infrastructure
2009-05-26 08:18:09 -07:00
Kconfig
davinci: add support for DM6467T EVM
2010-02-04 13:29:44 -08:00
Makefile
davinci: Initial support for Neuros OSD2 platform.
2009-11-25 10:21:39 -08:00
Makefile.boot
davinci: da8xx: Add base DA830/OMAP-L137 SoC support
2009-08-26 10:56:59 +03:00
mux.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
mux.h
davinci: update pin-multiplexing support
2009-04-27 09:49:46 -07:00
psc.c
davinci: move PSC register definitions from psc.c to psc.h
2010-02-04 13:29:36 -08:00
serial.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
sram.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
time.c
DaVinci: remove unneeded #include's
2009-11-25 10:21:31 -08:00
usb.c
DA8xx: MUSB platform device registration
2009-11-25 10:21:33 -08:00