mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
cb2517653f
schedstats is very useful during debugging and performance tuning but it incurs overhead to calculate the stats. As such, even though it can be disabled at build time, it is often enabled as the information is useful. This patch adds a kernel command-line and sysctl tunable to enable or disable schedstats on demand (when it's built in). It is disabled by default as someone who knows they need it can also learn to enable it when necessary. The benefits are dependent on how scheduler-intensive the workload is. If it is then the patch reduces the number of cycles spent calculating the stats with a small benefit from reducing the cache footprint of the scheduler. These measurements were taken from a 48-core 2-socket machine with Xeon(R) E5-2670 v3 cpus although they were also tested on a single socket machine 8-core machine with Intel i7-3770 processors. netperf-tcp 4.5.0-rc1 4.5.0-rc1 vanilla nostats-v3r1 Hmean 64 560.45 ( 0.00%) 575.98 ( 2.77%) Hmean 128 766.66 ( 0.00%) 795.79 ( 3.80%) Hmean 256 950.51 ( 0.00%) 981.50 ( 3.26%) Hmean 1024 1433.25 ( 0.00%) 1466.51 ( 2.32%) Hmean 2048 2810.54 ( 0.00%) 2879.75 ( 2.46%) Hmean 3312 4618.18 ( 0.00%) 4682.09 ( 1.38%) Hmean 4096 5306.42 ( 0.00%) 5346.39 ( 0.75%) Hmean 8192 10581.44 ( 0.00%) 10698.15 ( 1.10%) Hmean 16384 18857.70 ( 0.00%) 18937.61 ( 0.42%) Small gains here, UDP_STREAM showed nothing intresting and neither did the TCP_RR tests. The gains on the 8-core machine were very similar. tbench4 4.5.0-rc1 4.5.0-rc1 vanilla nostats-v3r1 Hmean mb/sec-1 500.85 ( 0.00%) 522.43 ( 4.31%) Hmean mb/sec-2 984.66 ( 0.00%) 1018.19 ( 3.41%) Hmean mb/sec-4 1827.91 ( 0.00%) 1847.78 ( 1.09%) Hmean mb/sec-8 3561.36 ( 0.00%) 3611.28 ( 1.40%) Hmean mb/sec-16 5824.52 ( 0.00%) 5929.03 ( 1.79%) Hmean mb/sec-32 10943.10 ( 0.00%) 10802.83 ( -1.28%) Hmean mb/sec-64 15950.81 ( 0.00%) 16211.31 ( 1.63%) Hmean mb/sec-128 15302.17 ( 0.00%) 15445.11 ( 0.93%) Hmean mb/sec-256 14866.18 ( 0.00%) 15088.73 ( 1.50%) Hmean mb/sec-512 15223.31 ( 0.00%) 15373.69 ( 0.99%) Hmean mb/sec-1024 14574.25 ( 0.00%) 14598.02 ( 0.16%) Hmean mb/sec-2048 13569.02 ( 0.00%) 13733.86 ( 1.21%) Hmean mb/sec-3072 12865.98 ( 0.00%) 13209.23 ( 2.67%) Small gains of 2-4% at low thread counts and otherwise flat. The gains on the 8-core machine were slightly different tbench4 on 8-core i7-3770 single socket machine Hmean mb/sec-1 442.59 ( 0.00%) 448.73 ( 1.39%) Hmean mb/sec-2 796.68 ( 0.00%) 794.39 ( -0.29%) Hmean mb/sec-4 1322.52 ( 0.00%) 1343.66 ( 1.60%) Hmean mb/sec-8 2611.65 ( 0.00%) 2694.86 ( 3.19%) Hmean mb/sec-16 2537.07 ( 0.00%) 2609.34 ( 2.85%) Hmean mb/sec-32 2506.02 ( 0.00%) 2578.18 ( 2.88%) Hmean mb/sec-64 2511.06 ( 0.00%) 2569.16 ( 2.31%) Hmean mb/sec-128 2313.38 ( 0.00%) 2395.50 ( 3.55%) Hmean mb/sec-256 2110.04 ( 0.00%) 2177.45 ( 3.19%) Hmean mb/sec-512 2072.51 ( 0.00%) 2053.97 ( -0.89%) In constract, this shows a relatively steady 2-3% gain at higher thread counts. Due to the nature of the patch and the type of workload, it's not a surprise that the result will depend on the CPU used. hackbench-pipes 4.5.0-rc1 4.5.0-rc1 vanilla nostats-v3r1 Amean 1 0.0637 ( 0.00%) 0.0660 ( -3.59%) Amean 4 0.1229 ( 0.00%) 0.1181 ( 3.84%) Amean 7 0.1921 ( 0.00%) 0.1911 ( 0.52%) Amean 12 0.3117 ( 0.00%) 0.2923 ( 6.23%) Amean 21 0.4050 ( 0.00%) 0.3899 ( 3.74%) Amean 30 0.4586 ( 0.00%) 0.4433 ( 3.33%) Amean 48 0.5910 ( 0.00%) 0.5694 ( 3.65%) Amean 79 0.8663 ( 0.00%) 0.8626 ( 0.43%) Amean 110 1.1543 ( 0.00%) 1.1517 ( 0.22%) Amean 141 1.4457 ( 0.00%) 1.4290 ( 1.16%) Amean 172 1.7090 ( 0.00%) 1.6924 ( 0.97%) Amean 192 1.9126 ( 0.00%) 1.9089 ( 0.19%) Some small gains and losses and while the variance data is not included, it's close to the noise. The UMA machine did not show anything particularly different pipetest 4.5.0-rc1 4.5.0-rc1 vanilla nostats-v2r2 Min Time 4.13 ( 0.00%) 3.99 ( 3.39%) 1st-qrtle Time 4.38 ( 0.00%) 4.27 ( 2.51%) 2nd-qrtle Time 4.46 ( 0.00%) 4.39 ( 1.57%) 3rd-qrtle Time 4.56 ( 0.00%) 4.51 ( 1.10%) Max-90% Time 4.67 ( 0.00%) 4.60 ( 1.50%) Max-93% Time 4.71 ( 0.00%) 4.65 ( 1.27%) Max-95% Time 4.74 ( 0.00%) 4.71 ( 0.63%) Max-99% Time 4.88 ( 0.00%) 4.79 ( 1.84%) Max Time 4.93 ( 0.00%) 4.83 ( 2.03%) Mean Time 4.48 ( 0.00%) 4.39 ( 1.91%) Best99%Mean Time 4.47 ( 0.00%) 4.39 ( 1.91%) Best95%Mean Time 4.46 ( 0.00%) 4.38 ( 1.93%) Best90%Mean Time 4.45 ( 0.00%) 4.36 ( 1.98%) Best50%Mean Time 4.36 ( 0.00%) 4.25 ( 2.49%) Best10%Mean Time 4.23 ( 0.00%) 4.10 ( 3.13%) Best5%Mean Time 4.19 ( 0.00%) 4.06 ( 3.20%) Best1%Mean Time 4.13 ( 0.00%) 4.00 ( 3.39%) Small improvement and similar gains were seen on the UMA machine. The gain is small but it stands to reason that doing less work in the scheduler is a good thing. The downside is that the lack of schedstats and tracepoints may be surprising to experts doing performance analysis until they find the existence of the schedstats= parameter or schedstats sysctl. It will be automatically activated for latencytop and sleep profiling to alleviate the problem. For tracepoints, there is a simple warning as it's not safe to activate schedstats in the context when it's known the tracepoint may be wanted but is unavailable. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk> Reviewed-by: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <mgalbraith@suse.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1454663316-22048-1-git-send-email-mgorman@techsingularity.net Signed-off-by: Ingo Molnar <mingo@kernel.org>
615 lines
16 KiB
C
615 lines
16 KiB
C
/*
|
|
* linux/kernel/profile.c
|
|
* Simple profiling. Manages a direct-mapped profile hit count buffer,
|
|
* with configurable resolution, support for restricting the cpus on
|
|
* which profiling is done, and switching between cpu time and
|
|
* schedule() calls via kernel command line parameters passed at boot.
|
|
*
|
|
* Scheduler profiling support, Arjan van de Ven and Ingo Molnar,
|
|
* Red Hat, July 2004
|
|
* Consolidation of architecture support code for profiling,
|
|
* Nadia Yvette Chambers, Oracle, July 2004
|
|
* Amortized hit count accounting via per-cpu open-addressed hashtables
|
|
* to resolve timer interrupt livelocks, Nadia Yvette Chambers,
|
|
* Oracle, 2004
|
|
*/
|
|
|
|
#include <linux/export.h>
|
|
#include <linux/profile.h>
|
|
#include <linux/bootmem.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/cpumask.h>
|
|
#include <linux/cpu.h>
|
|
#include <linux/highmem.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <asm/sections.h>
|
|
#include <asm/irq_regs.h>
|
|
#include <asm/ptrace.h>
|
|
|
|
struct profile_hit {
|
|
u32 pc, hits;
|
|
};
|
|
#define PROFILE_GRPSHIFT 3
|
|
#define PROFILE_GRPSZ (1 << PROFILE_GRPSHIFT)
|
|
#define NR_PROFILE_HIT (PAGE_SIZE/sizeof(struct profile_hit))
|
|
#define NR_PROFILE_GRP (NR_PROFILE_HIT/PROFILE_GRPSZ)
|
|
|
|
static atomic_t *prof_buffer;
|
|
static unsigned long prof_len, prof_shift;
|
|
|
|
int prof_on __read_mostly;
|
|
EXPORT_SYMBOL_GPL(prof_on);
|
|
|
|
static cpumask_var_t prof_cpu_mask;
|
|
#ifdef CONFIG_SMP
|
|
static DEFINE_PER_CPU(struct profile_hit *[2], cpu_profile_hits);
|
|
static DEFINE_PER_CPU(int, cpu_profile_flip);
|
|
static DEFINE_MUTEX(profile_flip_mutex);
|
|
#endif /* CONFIG_SMP */
|
|
|
|
int profile_setup(char *str)
|
|
{
|
|
static const char schedstr[] = "schedule";
|
|
static const char sleepstr[] = "sleep";
|
|
static const char kvmstr[] = "kvm";
|
|
int par;
|
|
|
|
if (!strncmp(str, sleepstr, strlen(sleepstr))) {
|
|
#ifdef CONFIG_SCHEDSTATS
|
|
force_schedstat_enabled();
|
|
prof_on = SLEEP_PROFILING;
|
|
if (str[strlen(sleepstr)] == ',')
|
|
str += strlen(sleepstr) + 1;
|
|
if (get_option(&str, &par))
|
|
prof_shift = par;
|
|
pr_info("kernel sleep profiling enabled (shift: %ld)\n",
|
|
prof_shift);
|
|
#else
|
|
pr_warn("kernel sleep profiling requires CONFIG_SCHEDSTATS\n");
|
|
#endif /* CONFIG_SCHEDSTATS */
|
|
} else if (!strncmp(str, schedstr, strlen(schedstr))) {
|
|
prof_on = SCHED_PROFILING;
|
|
if (str[strlen(schedstr)] == ',')
|
|
str += strlen(schedstr) + 1;
|
|
if (get_option(&str, &par))
|
|
prof_shift = par;
|
|
pr_info("kernel schedule profiling enabled (shift: %ld)\n",
|
|
prof_shift);
|
|
} else if (!strncmp(str, kvmstr, strlen(kvmstr))) {
|
|
prof_on = KVM_PROFILING;
|
|
if (str[strlen(kvmstr)] == ',')
|
|
str += strlen(kvmstr) + 1;
|
|
if (get_option(&str, &par))
|
|
prof_shift = par;
|
|
pr_info("kernel KVM profiling enabled (shift: %ld)\n",
|
|
prof_shift);
|
|
} else if (get_option(&str, &par)) {
|
|
prof_shift = par;
|
|
prof_on = CPU_PROFILING;
|
|
pr_info("kernel profiling enabled (shift: %ld)\n",
|
|
prof_shift);
|
|
}
|
|
return 1;
|
|
}
|
|
__setup("profile=", profile_setup);
|
|
|
|
|
|
int __ref profile_init(void)
|
|
{
|
|
int buffer_bytes;
|
|
if (!prof_on)
|
|
return 0;
|
|
|
|
/* only text is profiled */
|
|
prof_len = (_etext - _stext) >> prof_shift;
|
|
buffer_bytes = prof_len*sizeof(atomic_t);
|
|
|
|
if (!alloc_cpumask_var(&prof_cpu_mask, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
cpumask_copy(prof_cpu_mask, cpu_possible_mask);
|
|
|
|
prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
|
|
if (prof_buffer)
|
|
return 0;
|
|
|
|
prof_buffer = alloc_pages_exact(buffer_bytes,
|
|
GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
|
|
if (prof_buffer)
|
|
return 0;
|
|
|
|
prof_buffer = vzalloc(buffer_bytes);
|
|
if (prof_buffer)
|
|
return 0;
|
|
|
|
free_cpumask_var(prof_cpu_mask);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* Profile event notifications */
|
|
|
|
static BLOCKING_NOTIFIER_HEAD(task_exit_notifier);
|
|
static ATOMIC_NOTIFIER_HEAD(task_free_notifier);
|
|
static BLOCKING_NOTIFIER_HEAD(munmap_notifier);
|
|
|
|
void profile_task_exit(struct task_struct *task)
|
|
{
|
|
blocking_notifier_call_chain(&task_exit_notifier, 0, task);
|
|
}
|
|
|
|
int profile_handoff_task(struct task_struct *task)
|
|
{
|
|
int ret;
|
|
ret = atomic_notifier_call_chain(&task_free_notifier, 0, task);
|
|
return (ret == NOTIFY_OK) ? 1 : 0;
|
|
}
|
|
|
|
void profile_munmap(unsigned long addr)
|
|
{
|
|
blocking_notifier_call_chain(&munmap_notifier, 0, (void *)addr);
|
|
}
|
|
|
|
int task_handoff_register(struct notifier_block *n)
|
|
{
|
|
return atomic_notifier_chain_register(&task_free_notifier, n);
|
|
}
|
|
EXPORT_SYMBOL_GPL(task_handoff_register);
|
|
|
|
int task_handoff_unregister(struct notifier_block *n)
|
|
{
|
|
return atomic_notifier_chain_unregister(&task_free_notifier, n);
|
|
}
|
|
EXPORT_SYMBOL_GPL(task_handoff_unregister);
|
|
|
|
int profile_event_register(enum profile_type type, struct notifier_block *n)
|
|
{
|
|
int err = -EINVAL;
|
|
|
|
switch (type) {
|
|
case PROFILE_TASK_EXIT:
|
|
err = blocking_notifier_chain_register(
|
|
&task_exit_notifier, n);
|
|
break;
|
|
case PROFILE_MUNMAP:
|
|
err = blocking_notifier_chain_register(
|
|
&munmap_notifier, n);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(profile_event_register);
|
|
|
|
int profile_event_unregister(enum profile_type type, struct notifier_block *n)
|
|
{
|
|
int err = -EINVAL;
|
|
|
|
switch (type) {
|
|
case PROFILE_TASK_EXIT:
|
|
err = blocking_notifier_chain_unregister(
|
|
&task_exit_notifier, n);
|
|
break;
|
|
case PROFILE_MUNMAP:
|
|
err = blocking_notifier_chain_unregister(
|
|
&munmap_notifier, n);
|
|
break;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(profile_event_unregister);
|
|
|
|
#ifdef CONFIG_SMP
|
|
/*
|
|
* Each cpu has a pair of open-addressed hashtables for pending
|
|
* profile hits. read_profile() IPI's all cpus to request them
|
|
* to flip buffers and flushes their contents to prof_buffer itself.
|
|
* Flip requests are serialized by the profile_flip_mutex. The sole
|
|
* use of having a second hashtable is for avoiding cacheline
|
|
* contention that would otherwise happen during flushes of pending
|
|
* profile hits required for the accuracy of reported profile hits
|
|
* and so resurrect the interrupt livelock issue.
|
|
*
|
|
* The open-addressed hashtables are indexed by profile buffer slot
|
|
* and hold the number of pending hits to that profile buffer slot on
|
|
* a cpu in an entry. When the hashtable overflows, all pending hits
|
|
* are accounted to their corresponding profile buffer slots with
|
|
* atomic_add() and the hashtable emptied. As numerous pending hits
|
|
* may be accounted to a profile buffer slot in a hashtable entry,
|
|
* this amortizes a number of atomic profile buffer increments likely
|
|
* to be far larger than the number of entries in the hashtable,
|
|
* particularly given that the number of distinct profile buffer
|
|
* positions to which hits are accounted during short intervals (e.g.
|
|
* several seconds) is usually very small. Exclusion from buffer
|
|
* flipping is provided by interrupt disablement (note that for
|
|
* SCHED_PROFILING or SLEEP_PROFILING profile_hit() may be called from
|
|
* process context).
|
|
* The hash function is meant to be lightweight as opposed to strong,
|
|
* and was vaguely inspired by ppc64 firmware-supported inverted
|
|
* pagetable hash functions, but uses a full hashtable full of finite
|
|
* collision chains, not just pairs of them.
|
|
*
|
|
* -- nyc
|
|
*/
|
|
static void __profile_flip_buffers(void *unused)
|
|
{
|
|
int cpu = smp_processor_id();
|
|
|
|
per_cpu(cpu_profile_flip, cpu) = !per_cpu(cpu_profile_flip, cpu);
|
|
}
|
|
|
|
static void profile_flip_buffers(void)
|
|
{
|
|
int i, j, cpu;
|
|
|
|
mutex_lock(&profile_flip_mutex);
|
|
j = per_cpu(cpu_profile_flip, get_cpu());
|
|
put_cpu();
|
|
on_each_cpu(__profile_flip_buffers, NULL, 1);
|
|
for_each_online_cpu(cpu) {
|
|
struct profile_hit *hits = per_cpu(cpu_profile_hits, cpu)[j];
|
|
for (i = 0; i < NR_PROFILE_HIT; ++i) {
|
|
if (!hits[i].hits) {
|
|
if (hits[i].pc)
|
|
hits[i].pc = 0;
|
|
continue;
|
|
}
|
|
atomic_add(hits[i].hits, &prof_buffer[hits[i].pc]);
|
|
hits[i].hits = hits[i].pc = 0;
|
|
}
|
|
}
|
|
mutex_unlock(&profile_flip_mutex);
|
|
}
|
|
|
|
static void profile_discard_flip_buffers(void)
|
|
{
|
|
int i, cpu;
|
|
|
|
mutex_lock(&profile_flip_mutex);
|
|
i = per_cpu(cpu_profile_flip, get_cpu());
|
|
put_cpu();
|
|
on_each_cpu(__profile_flip_buffers, NULL, 1);
|
|
for_each_online_cpu(cpu) {
|
|
struct profile_hit *hits = per_cpu(cpu_profile_hits, cpu)[i];
|
|
memset(hits, 0, NR_PROFILE_HIT*sizeof(struct profile_hit));
|
|
}
|
|
mutex_unlock(&profile_flip_mutex);
|
|
}
|
|
|
|
static void do_profile_hits(int type, void *__pc, unsigned int nr_hits)
|
|
{
|
|
unsigned long primary, secondary, flags, pc = (unsigned long)__pc;
|
|
int i, j, cpu;
|
|
struct profile_hit *hits;
|
|
|
|
pc = min((pc - (unsigned long)_stext) >> prof_shift, prof_len - 1);
|
|
i = primary = (pc & (NR_PROFILE_GRP - 1)) << PROFILE_GRPSHIFT;
|
|
secondary = (~(pc << 1) & (NR_PROFILE_GRP - 1)) << PROFILE_GRPSHIFT;
|
|
cpu = get_cpu();
|
|
hits = per_cpu(cpu_profile_hits, cpu)[per_cpu(cpu_profile_flip, cpu)];
|
|
if (!hits) {
|
|
put_cpu();
|
|
return;
|
|
}
|
|
/*
|
|
* We buffer the global profiler buffer into a per-CPU
|
|
* queue and thus reduce the number of global (and possibly
|
|
* NUMA-alien) accesses. The write-queue is self-coalescing:
|
|
*/
|
|
local_irq_save(flags);
|
|
do {
|
|
for (j = 0; j < PROFILE_GRPSZ; ++j) {
|
|
if (hits[i + j].pc == pc) {
|
|
hits[i + j].hits += nr_hits;
|
|
goto out;
|
|
} else if (!hits[i + j].hits) {
|
|
hits[i + j].pc = pc;
|
|
hits[i + j].hits = nr_hits;
|
|
goto out;
|
|
}
|
|
}
|
|
i = (i + secondary) & (NR_PROFILE_HIT - 1);
|
|
} while (i != primary);
|
|
|
|
/*
|
|
* Add the current hit(s) and flush the write-queue out
|
|
* to the global buffer:
|
|
*/
|
|
atomic_add(nr_hits, &prof_buffer[pc]);
|
|
for (i = 0; i < NR_PROFILE_HIT; ++i) {
|
|
atomic_add(hits[i].hits, &prof_buffer[hits[i].pc]);
|
|
hits[i].pc = hits[i].hits = 0;
|
|
}
|
|
out:
|
|
local_irq_restore(flags);
|
|
put_cpu();
|
|
}
|
|
|
|
static int profile_cpu_callback(struct notifier_block *info,
|
|
unsigned long action, void *__cpu)
|
|
{
|
|
int node, cpu = (unsigned long)__cpu;
|
|
struct page *page;
|
|
|
|
switch (action) {
|
|
case CPU_UP_PREPARE:
|
|
case CPU_UP_PREPARE_FROZEN:
|
|
node = cpu_to_mem(cpu);
|
|
per_cpu(cpu_profile_flip, cpu) = 0;
|
|
if (!per_cpu(cpu_profile_hits, cpu)[1]) {
|
|
page = __alloc_pages_node(node,
|
|
GFP_KERNEL | __GFP_ZERO,
|
|
0);
|
|
if (!page)
|
|
return notifier_from_errno(-ENOMEM);
|
|
per_cpu(cpu_profile_hits, cpu)[1] = page_address(page);
|
|
}
|
|
if (!per_cpu(cpu_profile_hits, cpu)[0]) {
|
|
page = __alloc_pages_node(node,
|
|
GFP_KERNEL | __GFP_ZERO,
|
|
0);
|
|
if (!page)
|
|
goto out_free;
|
|
per_cpu(cpu_profile_hits, cpu)[0] = page_address(page);
|
|
}
|
|
break;
|
|
out_free:
|
|
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[1]);
|
|
per_cpu(cpu_profile_hits, cpu)[1] = NULL;
|
|
__free_page(page);
|
|
return notifier_from_errno(-ENOMEM);
|
|
case CPU_ONLINE:
|
|
case CPU_ONLINE_FROZEN:
|
|
if (prof_cpu_mask != NULL)
|
|
cpumask_set_cpu(cpu, prof_cpu_mask);
|
|
break;
|
|
case CPU_UP_CANCELED:
|
|
case CPU_UP_CANCELED_FROZEN:
|
|
case CPU_DEAD:
|
|
case CPU_DEAD_FROZEN:
|
|
if (prof_cpu_mask != NULL)
|
|
cpumask_clear_cpu(cpu, prof_cpu_mask);
|
|
if (per_cpu(cpu_profile_hits, cpu)[0]) {
|
|
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[0]);
|
|
per_cpu(cpu_profile_hits, cpu)[0] = NULL;
|
|
__free_page(page);
|
|
}
|
|
if (per_cpu(cpu_profile_hits, cpu)[1]) {
|
|
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[1]);
|
|
per_cpu(cpu_profile_hits, cpu)[1] = NULL;
|
|
__free_page(page);
|
|
}
|
|
break;
|
|
}
|
|
return NOTIFY_OK;
|
|
}
|
|
#else /* !CONFIG_SMP */
|
|
#define profile_flip_buffers() do { } while (0)
|
|
#define profile_discard_flip_buffers() do { } while (0)
|
|
#define profile_cpu_callback NULL
|
|
|
|
static void do_profile_hits(int type, void *__pc, unsigned int nr_hits)
|
|
{
|
|
unsigned long pc;
|
|
pc = ((unsigned long)__pc - (unsigned long)_stext) >> prof_shift;
|
|
atomic_add(nr_hits, &prof_buffer[min(pc, prof_len - 1)]);
|
|
}
|
|
#endif /* !CONFIG_SMP */
|
|
|
|
void profile_hits(int type, void *__pc, unsigned int nr_hits)
|
|
{
|
|
if (prof_on != type || !prof_buffer)
|
|
return;
|
|
do_profile_hits(type, __pc, nr_hits);
|
|
}
|
|
EXPORT_SYMBOL_GPL(profile_hits);
|
|
|
|
void profile_tick(int type)
|
|
{
|
|
struct pt_regs *regs = get_irq_regs();
|
|
|
|
if (!user_mode(regs) && prof_cpu_mask != NULL &&
|
|
cpumask_test_cpu(smp_processor_id(), prof_cpu_mask))
|
|
profile_hit(type, (void *)profile_pc(regs));
|
|
}
|
|
|
|
#ifdef CONFIG_PROC_FS
|
|
#include <linux/proc_fs.h>
|
|
#include <linux/seq_file.h>
|
|
#include <asm/uaccess.h>
|
|
|
|
static int prof_cpu_mask_proc_show(struct seq_file *m, void *v)
|
|
{
|
|
seq_printf(m, "%*pb\n", cpumask_pr_args(prof_cpu_mask));
|
|
return 0;
|
|
}
|
|
|
|
static int prof_cpu_mask_proc_open(struct inode *inode, struct file *file)
|
|
{
|
|
return single_open(file, prof_cpu_mask_proc_show, NULL);
|
|
}
|
|
|
|
static ssize_t prof_cpu_mask_proc_write(struct file *file,
|
|
const char __user *buffer, size_t count, loff_t *pos)
|
|
{
|
|
cpumask_var_t new_value;
|
|
int err;
|
|
|
|
if (!alloc_cpumask_var(&new_value, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
err = cpumask_parse_user(buffer, count, new_value);
|
|
if (!err) {
|
|
cpumask_copy(prof_cpu_mask, new_value);
|
|
err = count;
|
|
}
|
|
free_cpumask_var(new_value);
|
|
return err;
|
|
}
|
|
|
|
static const struct file_operations prof_cpu_mask_proc_fops = {
|
|
.open = prof_cpu_mask_proc_open,
|
|
.read = seq_read,
|
|
.llseek = seq_lseek,
|
|
.release = single_release,
|
|
.write = prof_cpu_mask_proc_write,
|
|
};
|
|
|
|
void create_prof_cpu_mask(void)
|
|
{
|
|
/* create /proc/irq/prof_cpu_mask */
|
|
proc_create("irq/prof_cpu_mask", 0600, NULL, &prof_cpu_mask_proc_fops);
|
|
}
|
|
|
|
/*
|
|
* This function accesses profiling information. The returned data is
|
|
* binary: the sampling step and the actual contents of the profile
|
|
* buffer. Use of the program readprofile is recommended in order to
|
|
* get meaningful info out of these data.
|
|
*/
|
|
static ssize_t
|
|
read_profile(struct file *file, char __user *buf, size_t count, loff_t *ppos)
|
|
{
|
|
unsigned long p = *ppos;
|
|
ssize_t read;
|
|
char *pnt;
|
|
unsigned int sample_step = 1 << prof_shift;
|
|
|
|
profile_flip_buffers();
|
|
if (p >= (prof_len+1)*sizeof(unsigned int))
|
|
return 0;
|
|
if (count > (prof_len+1)*sizeof(unsigned int) - p)
|
|
count = (prof_len+1)*sizeof(unsigned int) - p;
|
|
read = 0;
|
|
|
|
while (p < sizeof(unsigned int) && count > 0) {
|
|
if (put_user(*((char *)(&sample_step)+p), buf))
|
|
return -EFAULT;
|
|
buf++; p++; count--; read++;
|
|
}
|
|
pnt = (char *)prof_buffer + p - sizeof(atomic_t);
|
|
if (copy_to_user(buf, (void *)pnt, count))
|
|
return -EFAULT;
|
|
read += count;
|
|
*ppos += read;
|
|
return read;
|
|
}
|
|
|
|
/*
|
|
* Writing to /proc/profile resets the counters
|
|
*
|
|
* Writing a 'profiling multiplier' value into it also re-sets the profiling
|
|
* interrupt frequency, on architectures that support this.
|
|
*/
|
|
static ssize_t write_profile(struct file *file, const char __user *buf,
|
|
size_t count, loff_t *ppos)
|
|
{
|
|
#ifdef CONFIG_SMP
|
|
extern int setup_profiling_timer(unsigned int multiplier);
|
|
|
|
if (count == sizeof(int)) {
|
|
unsigned int multiplier;
|
|
|
|
if (copy_from_user(&multiplier, buf, sizeof(int)))
|
|
return -EFAULT;
|
|
|
|
if (setup_profiling_timer(multiplier))
|
|
return -EINVAL;
|
|
}
|
|
#endif
|
|
profile_discard_flip_buffers();
|
|
memset(prof_buffer, 0, prof_len * sizeof(atomic_t));
|
|
return count;
|
|
}
|
|
|
|
static const struct file_operations proc_profile_operations = {
|
|
.read = read_profile,
|
|
.write = write_profile,
|
|
.llseek = default_llseek,
|
|
};
|
|
|
|
#ifdef CONFIG_SMP
|
|
static void profile_nop(void *unused)
|
|
{
|
|
}
|
|
|
|
static int create_hash_tables(void)
|
|
{
|
|
int cpu;
|
|
|
|
for_each_online_cpu(cpu) {
|
|
int node = cpu_to_mem(cpu);
|
|
struct page *page;
|
|
|
|
page = __alloc_pages_node(node,
|
|
GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE,
|
|
0);
|
|
if (!page)
|
|
goto out_cleanup;
|
|
per_cpu(cpu_profile_hits, cpu)[1]
|
|
= (struct profile_hit *)page_address(page);
|
|
page = __alloc_pages_node(node,
|
|
GFP_KERNEL | __GFP_ZERO | __GFP_THISNODE,
|
|
0);
|
|
if (!page)
|
|
goto out_cleanup;
|
|
per_cpu(cpu_profile_hits, cpu)[0]
|
|
= (struct profile_hit *)page_address(page);
|
|
}
|
|
return 0;
|
|
out_cleanup:
|
|
prof_on = 0;
|
|
smp_mb();
|
|
on_each_cpu(profile_nop, NULL, 1);
|
|
for_each_online_cpu(cpu) {
|
|
struct page *page;
|
|
|
|
if (per_cpu(cpu_profile_hits, cpu)[0]) {
|
|
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[0]);
|
|
per_cpu(cpu_profile_hits, cpu)[0] = NULL;
|
|
__free_page(page);
|
|
}
|
|
if (per_cpu(cpu_profile_hits, cpu)[1]) {
|
|
page = virt_to_page(per_cpu(cpu_profile_hits, cpu)[1]);
|
|
per_cpu(cpu_profile_hits, cpu)[1] = NULL;
|
|
__free_page(page);
|
|
}
|
|
}
|
|
return -1;
|
|
}
|
|
#else
|
|
#define create_hash_tables() ({ 0; })
|
|
#endif
|
|
|
|
int __ref create_proc_profile(void) /* false positive from hotcpu_notifier */
|
|
{
|
|
struct proc_dir_entry *entry;
|
|
int err = 0;
|
|
|
|
if (!prof_on)
|
|
return 0;
|
|
|
|
cpu_notifier_register_begin();
|
|
|
|
if (create_hash_tables()) {
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
entry = proc_create("profile", S_IWUSR | S_IRUGO,
|
|
NULL, &proc_profile_operations);
|
|
if (!entry)
|
|
goto out;
|
|
proc_set_size(entry, (1 + prof_len) * sizeof(atomic_t));
|
|
__hotcpu_notifier(profile_cpu_callback, 0);
|
|
|
|
out:
|
|
cpu_notifier_register_done();
|
|
return err;
|
|
}
|
|
subsys_initcall(create_proc_profile);
|
|
#endif /* CONFIG_PROC_FS */
|