Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-12-27 13:22:23 +00:00
Code Issues Packages Projects Releases Wiki Activity
728b117e78
linux/drivers/hwmon/ina209.c
Uwe Kleine-König ed5c2f5fd1 i2c: Make remove callback return void 
The value returned by an i2c driver's remove function is mostly ignored.
(Only an error message is printed if the value is non-zero that the
error is ignored.)

So change the prototype of the remove function to return no value. This
way driver authors are not tempted to assume that passing an error to
the upper layer is a good idea. All drivers are adapted accordingly.
There is no intended change of behaviour, all callbacks were prepared to
return 0 before.

Reviewed-by: Peter Senna Tschudin <peter.senna@gmail.com>
Reviewed-by: Jeremy Kerr <jk@codeconstruct.com.au>
Reviewed-by: Benjamin Mugnier <benjamin.mugnier@foss.st.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Crt Mori <cmo@melexis.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Marek Behún <kabel@kernel.org> # for leds-turris-omnia
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Petr Machata <petrm@nvidia.com> # for mlxsw
Reviewed-by: Maximilian Luz <luzmaximilian@gmail.com> # for surface3_power
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> # for bmc150-accel-i2c + kxcjk-1013
Reviewed-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> # for media/* + staging/media/*
Acked-by: Miguel Ojeda <ojeda@kernel.org> # for auxdisplay/ht16k33 + auxdisplay/lcd2s
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # for versaclock5
Reviewed-by: Ajay Gupta <ajayg@nvidia.com> # for ucsi_ccg
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> # for iio
Acked-by: Peter Rosin <peda@axentia.se> # for i2c-mux-*, max9860
Acked-by: Adrien Grassein <adrien.grassein@gmail.com> # for lontium-lt8912b
Reviewed-by: Jean Delvare <jdelvare@suse.de> # for hwmon, i2c-core and i2c/muxes
Acked-by: Corey Minyard <cminyard@mvista.com> # for IPMI
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com> # for drivers/power
Acked-by: Krzysztof Hałasa <khalasa@piap.pl>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
2022-08-16 12:46:26 +02:00

607 lines
17 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0-only
/*
* Driver for the Texas Instruments / Burr Brown INA209
* Bidirectional Current/Power Monitor
*
* Copyright (C) 2012 Guenter Roeck <linux@roeck-us.net>
*
* Derived from Ira W. Snyder's original driver submission
* Copyright (C) 2008 Paul Hays <Paul.Hays@cattail.ca>
* Copyright (C) 2008-2009 Ira W. Snyder <iws@ovro.caltech.edu>
*
* Aligned with ina2xx driver
* Copyright (C) 2012 Lothar Felten <l-felten@ti.com>
* Thanks to Jan Volkering
*
* Datasheet:
* https://www.ti.com/lit/gpn/ina209
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <linux/bug.h>
#include <linux/i2c.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/platform_data/ina2xx.h>
/* register definitions */
#define INA209_CONFIGURATION 0x00
#define INA209_STATUS 0x01
#define INA209_STATUS_MASK 0x02
#define INA209_SHUNT_VOLTAGE 0x03
#define INA209_BUS_VOLTAGE 0x04
#define INA209_POWER 0x05
#define INA209_CURRENT 0x06
#define INA209_SHUNT_VOLTAGE_POS_PEAK 0x07
#define INA209_SHUNT_VOLTAGE_NEG_PEAK 0x08
#define INA209_BUS_VOLTAGE_MAX_PEAK 0x09
#define INA209_BUS_VOLTAGE_MIN_PEAK 0x0a
#define INA209_POWER_PEAK 0x0b
#define INA209_SHUNT_VOLTAGE_POS_WARN 0x0c
#define INA209_SHUNT_VOLTAGE_NEG_WARN 0x0d
#define INA209_POWER_WARN 0x0e
#define INA209_BUS_VOLTAGE_OVER_WARN 0x0f
#define INA209_BUS_VOLTAGE_UNDER_WARN 0x10
#define INA209_POWER_OVER_LIMIT 0x11
#define INA209_BUS_VOLTAGE_OVER_LIMIT 0x12
#define INA209_BUS_VOLTAGE_UNDER_LIMIT 0x13
#define INA209_CRITICAL_DAC_POS 0x14
#define INA209_CRITICAL_DAC_NEG 0x15
#define INA209_CALIBRATION 0x16
#define INA209_REGISTERS 0x17
#define INA209_CONFIG_DEFAULT 0x3c47 /* PGA=8, full range */
#define INA209_SHUNT_DEFAULT 10000 /* uOhm */
struct ina209_data {
struct i2c_client *client;
struct mutex update_lock;
bool valid;
unsigned long last_updated; /* in jiffies */
u16 regs[INA209_REGISTERS]; /* All chip registers */
u16 config_orig; /* Original configuration */
u16 calibration_orig; /* Original calibration */
u16 update_interval;
};
static struct ina209_data *ina209_update_device(struct device *dev)
{
struct ina209_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
struct ina209_data *ret = data;
s32 val;
int i;
mutex_lock(&data->update_lock);
if (!data->valid ||
time_after(jiffies, data->last_updated + data->update_interval)) {
for (i = 0; i < ARRAY_SIZE(data->regs); i++) {
val = i2c_smbus_read_word_swapped(client, i);
if (val < 0) {
ret = ERR_PTR(val);
goto abort;
}
data->regs[i] = val;
}
data->last_updated = jiffies;
data->valid = true;
}
abort:
mutex_unlock(&data->update_lock);
return ret;
}
/*
* Read a value from a device register and convert it to the
* appropriate sysfs units
*/
static long ina209_from_reg(const u8 reg, const u16 val)
{
switch (reg) {
case INA209_SHUNT_VOLTAGE:
case INA209_SHUNT_VOLTAGE_POS_PEAK:
case INA209_SHUNT_VOLTAGE_NEG_PEAK:
case INA209_SHUNT_VOLTAGE_POS_WARN:
case INA209_SHUNT_VOLTAGE_NEG_WARN:
/* LSB=10 uV. Convert to mV. */
return DIV_ROUND_CLOSEST((s16)val, 100);
case INA209_BUS_VOLTAGE:
case INA209_BUS_VOLTAGE_MAX_PEAK:
case INA209_BUS_VOLTAGE_MIN_PEAK:
case INA209_BUS_VOLTAGE_OVER_WARN:
case INA209_BUS_VOLTAGE_UNDER_WARN:
case INA209_BUS_VOLTAGE_OVER_LIMIT:
case INA209_BUS_VOLTAGE_UNDER_LIMIT:
/* LSB=4 mV, last 3 bits unused */
return (val >> 3) * 4;
case INA209_CRITICAL_DAC_POS:
/* LSB=1 mV, in the upper 8 bits */
return val >> 8;
case INA209_CRITICAL_DAC_NEG:
/* LSB=1 mV, in the upper 8 bits */
return -1 * (val >> 8);
case INA209_POWER:
case INA209_POWER_PEAK:
case INA209_POWER_WARN:
case INA209_POWER_OVER_LIMIT:
/* LSB=20 mW. Convert to uW */
return val * 20 * 1000L;
case INA209_CURRENT:
/* LSB=1 mA (selected). Is in mA */
return (s16)val;
}
/* programmer goofed */
WARN_ON_ONCE(1);
return 0;
}
/*
* Take a value and convert it to register format, clamping the value
* to the appropriate range.
*/
static int ina209_to_reg(u8 reg, u16 old, long val)
{
switch (reg) {
case INA209_SHUNT_VOLTAGE_POS_WARN:
case INA209_SHUNT_VOLTAGE_NEG_WARN:
/* Limit to +- 320 mV, 10 uV LSB */
return clamp_val(val, -320, 320) * 100;
case INA209_BUS_VOLTAGE_OVER_WARN:
case INA209_BUS_VOLTAGE_UNDER_WARN:
case INA209_BUS_VOLTAGE_OVER_LIMIT:
case INA209_BUS_VOLTAGE_UNDER_LIMIT:
/*
* Limit to 0-32000 mV, 4 mV LSB
*
* The last three bits aren't part of the value, but we'll
* preserve them in their original state.
*/
return (DIV_ROUND_CLOSEST(clamp_val(val, 0, 32000), 4) << 3)
| (old & 0x7);
case INA209_CRITICAL_DAC_NEG:
/*
* Limit to -255-0 mV, 1 mV LSB
* Convert the value to a positive value for the register
*
* The value lives in the top 8 bits only, be careful
* and keep original value of other bits.
*/
return (clamp_val(-val, 0, 255) << 8) | (old & 0xff);
case INA209_CRITICAL_DAC_POS:
/*
* Limit to 0-255 mV, 1 mV LSB
*
* The value lives in the top 8 bits only, be careful
* and keep original value of other bits.
*/
return (clamp_val(val, 0, 255) << 8) | (old & 0xff);
case INA209_POWER_WARN:
case INA209_POWER_OVER_LIMIT:
/* 20 mW LSB */
return DIV_ROUND_CLOSEST(val, 20 * 1000);
}
/* Other registers are read-only, return access error */
return -EACCES;
}
static int ina209_interval_from_reg(u16 reg)
{
return 68 >> (15 - ((reg >> 3) & 0x0f));
}
static u16 ina209_reg_from_interval(u16 config, long interval)
{
int i, adc;
if (interval <= 0) {
adc = 8;
} else {
adc = 15;
for (i = 34 + 34 / 2; i; i >>= 1) {
if (i < interval)
break;
adc--;
}
}
return (config & 0xf807) | (adc << 3) | (adc << 7);
}
static ssize_t ina209_interval_store(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct ina209_data *data = ina209_update_device(dev);
long val;
u16 regval;
int ret;
if (IS_ERR(data))
return PTR_ERR(data);
ret = kstrtol(buf, 10, &val);
if (ret < 0)
return ret;
mutex_lock(&data->update_lock);
regval = ina209_reg_from_interval(data->regs[INA209_CONFIGURATION],
val);
i2c_smbus_write_word_swapped(data->client, INA209_CONFIGURATION,
regval);
data->regs[INA209_CONFIGURATION] = regval;
data->update_interval = ina209_interval_from_reg(regval);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t ina209_interval_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct ina209_data *data = dev_get_drvdata(dev);
return sysfs_emit(buf, "%d\n", data->update_interval);
}
/*
* History is reset by writing 1 into bit 0 of the respective peak register.
* Since more than one peak register may be affected by the scope of a
* reset_history attribute write, use a bit mask in attr->index to identify
* which registers are affected.
*/
static u16 ina209_reset_history_regs[] = {
INA209_SHUNT_VOLTAGE_POS_PEAK,
INA209_SHUNT_VOLTAGE_NEG_PEAK,
INA209_BUS_VOLTAGE_MAX_PEAK,
INA209_BUS_VOLTAGE_MIN_PEAK,
INA209_POWER_PEAK
};
static ssize_t ina209_history_store(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ina209_data *data = dev_get_drvdata(dev);
struct i2c_client *client = data->client;
u32 mask = attr->index;
long val;
int i, ret;
ret = kstrtol(buf, 10, &val);
if (ret < 0)
return ret;
mutex_lock(&data->update_lock);
for (i = 0; i < ARRAY_SIZE(ina209_reset_history_regs); i++) {
if (mask & (1 << i))
i2c_smbus_write_word_swapped(client,
ina209_reset_history_regs[i], 1);
}
data->valid = false;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t ina209_value_store(struct device *dev,
struct device_attribute *da,
const char *buf, size_t count)
{
struct ina209_data *data = ina209_update_device(dev);
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
int reg = attr->index;
long val;
int ret;
if (IS_ERR(data))
return PTR_ERR(data);
ret = kstrtol(buf, 10, &val);
if (ret < 0)
return ret;
mutex_lock(&data->update_lock);
ret = ina209_to_reg(reg, data->regs[reg], val);
if (ret < 0) {
count = ret;
goto abort;
}
i2c_smbus_write_word_swapped(data->client, reg, ret);
data->regs[reg] = ret;
abort:
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t ina209_value_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ina209_data *data = ina209_update_device(dev);
long val;
if (IS_ERR(data))
return PTR_ERR(data);
val = ina209_from_reg(attr->index, data->regs[attr->index]);
return sysfs_emit(buf, "%ld\n", val);
}
static ssize_t ina209_alarm_show(struct device *dev,
struct device_attribute *da, char *buf)
{
struct sensor_device_attribute *attr = to_sensor_dev_attr(da);
struct ina209_data *data = ina209_update_device(dev);
const unsigned int mask = attr->index;
u16 status;
if (IS_ERR(data))
return PTR_ERR(data);
status = data->regs[INA209_STATUS];
/*
* All alarms are in the INA209_STATUS register. To avoid a long
* switch statement, the mask is passed in attr->index
*/
return sysfs_emit(buf, "%u\n", !!(status & mask));
}
/* Shunt voltage, history, limits, alarms */
static SENSOR_DEVICE_ATTR_RO(in0_input, ina209_value, INA209_SHUNT_VOLTAGE);
static SENSOR_DEVICE_ATTR_RO(in0_input_highest, ina209_value,
INA209_SHUNT_VOLTAGE_POS_PEAK);
static SENSOR_DEVICE_ATTR_RO(in0_input_lowest, ina209_value,
INA209_SHUNT_VOLTAGE_NEG_PEAK);
static SENSOR_DEVICE_ATTR_WO(in0_reset_history, ina209_history,
(1 << 0) | (1 << 1));
static SENSOR_DEVICE_ATTR_RW(in0_max, ina209_value,
INA209_SHUNT_VOLTAGE_POS_WARN);
static SENSOR_DEVICE_ATTR_RW(in0_min, ina209_value,
INA209_SHUNT_VOLTAGE_NEG_WARN);
static SENSOR_DEVICE_ATTR_RW(in0_crit_max, ina209_value,
INA209_CRITICAL_DAC_POS);
static SENSOR_DEVICE_ATTR_RW(in0_crit_min, ina209_value,
INA209_CRITICAL_DAC_NEG);
static SENSOR_DEVICE_ATTR_RO(in0_min_alarm, ina209_alarm, 1 << 11);
static SENSOR_DEVICE_ATTR_RO(in0_max_alarm, ina209_alarm, 1 << 12);
static SENSOR_DEVICE_ATTR_RO(in0_crit_min_alarm, ina209_alarm, 1 << 6);
static SENSOR_DEVICE_ATTR_RO(in0_crit_max_alarm, ina209_alarm, 1 << 7);
/* Bus voltage, history, limits, alarms */
static SENSOR_DEVICE_ATTR_RO(in1_input, ina209_value, INA209_BUS_VOLTAGE);
static SENSOR_DEVICE_ATTR_RO(in1_input_highest, ina209_value,
INA209_BUS_VOLTAGE_MAX_PEAK);
static SENSOR_DEVICE_ATTR_RO(in1_input_lowest, ina209_value,
INA209_BUS_VOLTAGE_MIN_PEAK);
static SENSOR_DEVICE_ATTR_WO(in1_reset_history, ina209_history,
(1 << 2) | (1 << 3));
static SENSOR_DEVICE_ATTR_RW(in1_max, ina209_value,
INA209_BUS_VOLTAGE_OVER_WARN);
static SENSOR_DEVICE_ATTR_RW(in1_min, ina209_value,
INA209_BUS_VOLTAGE_UNDER_WARN);
static SENSOR_DEVICE_ATTR_RW(in1_crit_max, ina209_value,
INA209_BUS_VOLTAGE_OVER_LIMIT);
static SENSOR_DEVICE_ATTR_RW(in1_crit_min, ina209_value,
INA209_BUS_VOLTAGE_UNDER_LIMIT);
static SENSOR_DEVICE_ATTR_RO(in1_min_alarm, ina209_alarm, 1 << 14);
static SENSOR_DEVICE_ATTR_RO(in1_max_alarm, ina209_alarm, 1 << 15);
static SENSOR_DEVICE_ATTR_RO(in1_crit_min_alarm, ina209_alarm, 1 << 9);
static SENSOR_DEVICE_ATTR_RO(in1_crit_max_alarm, ina209_alarm, 1 << 10);
/* Power */
static SENSOR_DEVICE_ATTR_RO(power1_input, ina209_value, INA209_POWER);
static SENSOR_DEVICE_ATTR_RO(power1_input_highest, ina209_value,
INA209_POWER_PEAK);
static SENSOR_DEVICE_ATTR_WO(power1_reset_history, ina209_history, 1 << 4);
static SENSOR_DEVICE_ATTR_RW(power1_max, ina209_value, INA209_POWER_WARN);
static SENSOR_DEVICE_ATTR_RW(power1_crit, ina209_value,
INA209_POWER_OVER_LIMIT);
static SENSOR_DEVICE_ATTR_RO(power1_max_alarm, ina209_alarm, 1 << 13);
static SENSOR_DEVICE_ATTR_RO(power1_crit_alarm, ina209_alarm, 1 << 8);
/* Current */
static SENSOR_DEVICE_ATTR_RO(curr1_input, ina209_value, INA209_CURRENT);
static SENSOR_DEVICE_ATTR_RW(update_interval, ina209_interval, 0);
/*
* Finally, construct an array of pointers to members of the above objects,
* as required for sysfs_create_group()
*/
static struct attribute *ina209_attrs[] = {
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_input_highest.dev_attr.attr,
&sensor_dev_attr_in0_input_lowest.dev_attr.attr,
&sensor_dev_attr_in0_reset_history.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in0_crit_max.dev_attr.attr,
&sensor_dev_attr_in0_crit_min.dev_attr.attr,
&sensor_dev_attr_in0_max_alarm.dev_attr.attr,
&sensor_dev_attr_in0_min_alarm.dev_attr.attr,
&sensor_dev_attr_in0_crit_max_alarm.dev_attr.attr,
&sensor_dev_attr_in0_crit_min_alarm.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_input_highest.dev_attr.attr,
&sensor_dev_attr_in1_input_lowest.dev_attr.attr,
&sensor_dev_attr_in1_reset_history.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in1_crit_max.dev_attr.attr,
&sensor_dev_attr_in1_crit_min.dev_attr.attr,
&sensor_dev_attr_in1_max_alarm.dev_attr.attr,
&sensor_dev_attr_in1_min_alarm.dev_attr.attr,
&sensor_dev_attr_in1_crit_max_alarm.dev_attr.attr,
&sensor_dev_attr_in1_crit_min_alarm.dev_attr.attr,
&sensor_dev_attr_power1_input.dev_attr.attr,
&sensor_dev_attr_power1_input_highest.dev_attr.attr,
&sensor_dev_attr_power1_reset_history.dev_attr.attr,
&sensor_dev_attr_power1_max.dev_attr.attr,
&sensor_dev_attr_power1_crit.dev_attr.attr,
&sensor_dev_attr_power1_max_alarm.dev_attr.attr,
&sensor_dev_attr_power1_crit_alarm.dev_attr.attr,
&sensor_dev_attr_curr1_input.dev_attr.attr,
&sensor_dev_attr_update_interval.dev_attr.attr,
NULL,
};
ATTRIBUTE_GROUPS(ina209);
static void ina209_restore_conf(struct i2c_client *client,
struct ina209_data *data)
{
/* Restore initial configuration */
i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
data->config_orig);
i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
data->calibration_orig);
}
static int ina209_init_client(struct i2c_client *client,
struct ina209_data *data)
{
struct ina2xx_platform_data *pdata = dev_get_platdata(&client->dev);
u32 shunt;
int reg;
reg = i2c_smbus_read_word_swapped(client, INA209_CALIBRATION);
if (reg < 0)
return reg;
data->calibration_orig = reg;
reg = i2c_smbus_read_word_swapped(client, INA209_CONFIGURATION);
if (reg < 0)
return reg;
data->config_orig = reg;
if (pdata) {
if (pdata->shunt_uohms <= 0)
return -EINVAL;
shunt = pdata->shunt_uohms;
} else if (!of_property_read_u32(client->dev.of_node, "shunt-resistor",
&shunt)) {
if (shunt == 0)
return -EINVAL;
} else {
shunt = data->calibration_orig ?
40960000 / data->calibration_orig : INA209_SHUNT_DEFAULT;
}
i2c_smbus_write_word_swapped(client, INA209_CONFIGURATION,
INA209_CONFIG_DEFAULT);
data->update_interval = ina209_interval_from_reg(INA209_CONFIG_DEFAULT);
/*
* Calibrate current LSB to 1mA. Shunt is in uOhms.
* See equation 13 in datasheet.
*/
i2c_smbus_write_word_swapped(client, INA209_CALIBRATION,
clamp_val(40960000 / shunt, 1, 65535));
/* Clear status register */
i2c_smbus_read_word_swapped(client, INA209_STATUS);
return 0;
}
static int ina209_probe(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
struct ina209_data *data;
struct device *hwmon_dev;
int ret;
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_WORD_DATA))
return -ENODEV;
data = devm_kzalloc(&client->dev, sizeof(*data), GFP_KERNEL);
if (!data)
return -ENOMEM;
i2c_set_clientdata(client, data);
data->client = client;
mutex_init(&data->update_lock);
ret = ina209_init_client(client, data);
if (ret)
return ret;
hwmon_dev = devm_hwmon_device_register_with_groups(&client->dev,
client->name,
data, ina209_groups);
if (IS_ERR(hwmon_dev)) {
ret = PTR_ERR(hwmon_dev);
goto out_restore_conf;
}
return 0;
out_restore_conf:
ina209_restore_conf(client, data);
return ret;
}
static void ina209_remove(struct i2c_client *client)
{
struct ina209_data *data = i2c_get_clientdata(client);
ina209_restore_conf(client, data);
}
static const struct i2c_device_id ina209_id[] = {
{ "ina209", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, ina209_id);
static const struct of_device_id __maybe_unused ina209_of_match[] = {
{ .compatible = "ti,ina209" },
{ },
};
MODULE_DEVICE_TABLE(of, ina209_of_match);
/* This is the driver that will be inserted */
static struct i2c_driver ina209_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "ina209",
.of_match_table = of_match_ptr(ina209_of_match),
},
.probe_new = ina209_probe,
.remove = ina209_remove,
.id_table = ina209_id,
};
module_i2c_driver(ina209_driver);
MODULE_AUTHOR("Ira W. Snyder <iws@ovro.caltech.edu>, Paul Hays <Paul.Hays@cattail.ca>, Guenter Roeck <linux@roeck-us.net>");
MODULE_DESCRIPTION("INA209 driver");
MODULE_LICENSE("GPL");
Reference in New Issue View Git Blame Copy Permalink