linux/sound/soc/codecs/rt5631.h
Greg Kroah-Hartman b24413180f License cleanup: add SPDX GPL-2.0 license identifier to files with no license
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.

By default all files without license information are under the default
license of the kernel, which is GPL version 2.

Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier.  The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.

This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.

How this work was done:

Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
 - file had no licensing information it it.
 - file was a */uapi/* one with no licensing information in it,
 - file was a */uapi/* one with existing licensing information,

Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.

The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne.  Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.

The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed.  Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.

Criteria used to select files for SPDX license identifier tagging was:
 - Files considered eligible had to be source code files.
 - Make and config files were included as candidates if they contained >5
   lines of source
 - File already had some variant of a license header in it (even if <5
   lines).

All documentation files were explicitly excluded.

The following heuristics were used to determine which SPDX license
identifiers to apply.

 - when both scanners couldn't find any license traces, file was
   considered to have no license information in it, and the top level
   COPYING file license applied.

   For non */uapi/* files that summary was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0                                              11139

   and resulted in the first patch in this series.

   If that file was a */uapi/* path one, it was "GPL-2.0 WITH
   Linux-syscall-note" otherwise it was "GPL-2.0".  Results of that was:

   SPDX license identifier                            # files
   ---------------------------------------------------|-------
   GPL-2.0 WITH Linux-syscall-note                        930

   and resulted in the second patch in this series.

 - if a file had some form of licensing information in it, and was one
   of the */uapi/* ones, it was denoted with the Linux-syscall-note if
   any GPL family license was found in the file or had no licensing in
   it (per prior point).  Results summary:

   SPDX license identifier                            # files
   ---------------------------------------------------|------
   GPL-2.0 WITH Linux-syscall-note                       270
   GPL-2.0+ WITH Linux-syscall-note                      169
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause)    21
   ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause)    17
   LGPL-2.1+ WITH Linux-syscall-note                      15
   GPL-1.0+ WITH Linux-syscall-note                       14
   ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause)    5
   LGPL-2.0+ WITH Linux-syscall-note                       4
   LGPL-2.1 WITH Linux-syscall-note                        3
   ((GPL-2.0 WITH Linux-syscall-note) OR MIT)              3
   ((GPL-2.0 WITH Linux-syscall-note) AND MIT)             1

   and that resulted in the third patch in this series.

 - when the two scanners agreed on the detected license(s), that became
   the concluded license(s).

 - when there was disagreement between the two scanners (one detected a
   license but the other didn't, or they both detected different
   licenses) a manual inspection of the file occurred.

 - In most cases a manual inspection of the information in the file
   resulted in a clear resolution of the license that should apply (and
   which scanner probably needed to revisit its heuristics).

 - When it was not immediately clear, the license identifier was
   confirmed with lawyers working with the Linux Foundation.

 - If there was any question as to the appropriate license identifier,
   the file was flagged for further research and to be revisited later
   in time.

In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.

Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights.  The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.

Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.

In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.

Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
 - a full scancode scan run, collecting the matched texts, detected
   license ids and scores
 - reviewing anything where there was a license detected (about 500+
   files) to ensure that the applied SPDX license was correct
 - reviewing anything where there was no detection but the patch license
   was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
   SPDX license was correct

This produced a worksheet with 20 files needing minor correction.  This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.

These .csv files were then reviewed by Greg.  Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected.  This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.)  Finally Greg ran the script using the .csv files to
generate the patches.

Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-11-02 11:10:55 +01:00

703 lines
27 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __RTCODEC5631_H__
#define __RTCODEC5631_H__
#define RT5631_RESET 0x00
#define RT5631_SPK_OUT_VOL 0x02
#define RT5631_HP_OUT_VOL 0x04
#define RT5631_MONO_AXO_1_2_VOL 0x06
#define RT5631_AUX_IN_VOL 0x0A
#define RT5631_STEREO_DAC_VOL_1 0x0C
#define RT5631_MIC_CTRL_1 0x0E
#define RT5631_STEREO_DAC_VOL_2 0x10
#define RT5631_ADC_CTRL_1 0x12
#define RT5631_ADC_REC_MIXER 0x14
#define RT5631_ADC_CTRL_2 0x16
#define RT5631_VDAC_DIG_VOL 0x18
#define RT5631_OUTMIXER_L_CTRL 0x1A
#define RT5631_OUTMIXER_R_CTRL 0x1C
#define RT5631_AXO1MIXER_CTRL 0x1E
#define RT5631_AXO2MIXER_CTRL 0x20
#define RT5631_MIC_CTRL_2 0x22
#define RT5631_DIG_MIC_CTRL 0x24
#define RT5631_MONO_INPUT_VOL 0x26
#define RT5631_SPK_MIXER_CTRL 0x28
#define RT5631_SPK_MONO_OUT_CTRL 0x2A
#define RT5631_SPK_MONO_HP_OUT_CTRL 0x2C
#define RT5631_SDP_CTRL 0x34
#define RT5631_MONO_SDP_CTRL 0x36
#define RT5631_STEREO_AD_DA_CLK_CTRL 0x38
#define RT5631_PWR_MANAG_ADD1 0x3A
#define RT5631_PWR_MANAG_ADD2 0x3B
#define RT5631_PWR_MANAG_ADD3 0x3C
#define RT5631_PWR_MANAG_ADD4 0x3E
#define RT5631_GEN_PUR_CTRL_REG 0x40
#define RT5631_GLOBAL_CLK_CTRL 0x42
#define RT5631_PLL_CTRL 0x44
#define RT5631_INT_ST_IRQ_CTRL_1 0x48
#define RT5631_INT_ST_IRQ_CTRL_2 0x4A
#define RT5631_GPIO_CTRL 0x4C
#define RT5631_MISC_CTRL 0x52
#define RT5631_DEPOP_FUN_CTRL_1 0x54
#define RT5631_DEPOP_FUN_CTRL_2 0x56
#define RT5631_JACK_DET_CTRL 0x5A
#define RT5631_SOFT_VOL_CTRL 0x5C
#define RT5631_ALC_CTRL_1 0x64
#define RT5631_ALC_CTRL_2 0x65
#define RT5631_ALC_CTRL_3 0x66
#define RT5631_PSEUDO_SPATL_CTRL 0x68
#define RT5631_INDEX_ADD 0x6A
#define RT5631_INDEX_DATA 0x6C
#define RT5631_EQ_CTRL 0x6E
#define RT5631_VENDOR_ID 0x7A
#define RT5631_VENDOR_ID1 0x7C
#define RT5631_VENDOR_ID2 0x7E
/* Index of Codec Private Register definition */
#define RT5631_EQ_BW_LOP 0x00
#define RT5631_EQ_GAIN_LOP 0x01
#define RT5631_EQ_FC_BP1 0x02
#define RT5631_EQ_BW_BP1 0x03
#define RT5631_EQ_GAIN_BP1 0x04
#define RT5631_EQ_FC_BP2 0x05
#define RT5631_EQ_BW_BP2 0x06
#define RT5631_EQ_GAIN_BP2 0x07
#define RT5631_EQ_FC_BP3 0x08
#define RT5631_EQ_BW_BP3 0x09
#define RT5631_EQ_GAIN_BP3 0x0a
#define RT5631_EQ_BW_HIP 0x0b
#define RT5631_EQ_GAIN_HIP 0x0c
#define RT5631_EQ_HPF_A1 0x0d
#define RT5631_EQ_HPF_A2 0x0e
#define RT5631_EQ_HPF_GAIN 0x0f
#define RT5631_EQ_PRE_VOL_CTRL 0x11
#define RT5631_EQ_POST_VOL_CTRL 0x12
#define RT5631_TEST_MODE_CTRL 0x39
#define RT5631_CP_INTL_REG2 0x45
#define RT5631_ADDA_MIXER_INTL_REG3 0x52
#define RT5631_SPK_INTL_CTRL 0x56
/* global definition */
#define RT5631_L_MUTE (0x1 << 15)
#define RT5631_L_MUTE_SHIFT 15
#define RT5631_L_EN (0x1 << 14)
#define RT5631_L_EN_SHIFT 14
#define RT5631_R_MUTE (0x1 << 7)
#define RT5631_R_MUTE_SHIFT 7
#define RT5631_R_EN (0x1 << 6)
#define RT5631_R_EN_SHIFT 6
#define RT5631_VOL_MASK 0x1f
#define RT5631_L_VOL_SHIFT 8
#define RT5631_R_VOL_SHIFT 0
/* Speaker Output Control(0x02) */
#define RT5631_SPK_L_VOL_SEL_MASK (0x1 << 14)
#define RT5631_SPK_L_VOL_SEL_VMID (0x0 << 14)
#define RT5631_SPK_L_VOL_SEL_SPKMIX_L (0x1 << 14)
#define RT5631_SPK_R_VOL_SEL_MASK (0x1 << 6)
#define RT5631_SPK_R_VOL_SEL_VMID (0x0 << 6)
#define RT5631_SPK_R_VOL_SEL_SPKMIX_R (0x1 << 6)
/* Headphone Output Control(0x04) */
#define RT5631_HP_L_VOL_SEL_MASK (0x1 << 14)
#define RT5631_HP_L_VOL_SEL_VMID (0x0 << 14)
#define RT5631_HP_L_VOL_SEL_OUTMIX_L (0x1 << 14)
#define RT5631_HP_R_VOL_SEL_MASK (0x1 << 6)
#define RT5631_HP_R_VOL_SEL_VMID (0x0 << 6)
#define RT5631_HP_R_VOL_SEL_OUTMIX_R (0x1 << 6)
/* Output Control for AUXOUT/MONO(0x06) */
#define RT5631_AUXOUT_1_VOL_SEL_MASK (0x1 << 14)
#define RT5631_AUXOUT_1_VOL_SEL_VMID (0x0 << 14)
#define RT5631_AUXOUT_1_VOL_SEL_OUTMIX_L (0x1 << 14)
#define RT5631_MUTE_MONO (0x1 << 13)
#define RT5631_MUTE_MONO_SHIFT 13
#define RT5631_AUXOUT_2_VOL_SEL_MASK (0x1 << 6)
#define RT5631_AUXOUT_2_VOL_SEL_VMID (0x0 << 6)
#define RT5631_AUXOUT_2_VOL_SEL_OUTMIX_R (0x1 << 6)
/* Microphone Input Control 1(0x0E) */
#define RT5631_MIC1_DIFF_INPUT_CTRL (0x1 << 15)
#define RT5631_MIC1_DIFF_INPUT_SHIFT 15
#define RT5631_MIC2_DIFF_INPUT_CTRL (0x1 << 7)
#define RT5631_MIC2_DIFF_INPUT_SHIFT 7
/* Stereo DAC Digital Volume2(0x10) */
#define RT5631_DAC_VOL_MASK 0xff
/* ADC Recording Mixer Control(0x14) */
#define RT5631_M_OUTMIXER_L_TO_RECMIXER_L (0x1 << 15)
#define RT5631_M_OUTMIXL_RECMIXL_BIT 15
#define RT5631_M_MIC1_TO_RECMIXER_L (0x1 << 14)
#define RT5631_M_MIC1_RECMIXL_BIT 14
#define RT5631_M_AXIL_TO_RECMIXER_L (0x1 << 13)
#define RT5631_M_AXIL_RECMIXL_BIT 13
#define RT5631_M_MONO_IN_TO_RECMIXER_L (0x1 << 12)
#define RT5631_M_MONO_IN_RECMIXL_BIT 12
#define RT5631_M_OUTMIXER_R_TO_RECMIXER_R (0x1 << 7)
#define RT5631_M_OUTMIXR_RECMIXR_BIT 7
#define RT5631_M_MIC2_TO_RECMIXER_R (0x1 << 6)
#define RT5631_M_MIC2_RECMIXR_BIT 6
#define RT5631_M_AXIR_TO_RECMIXER_R (0x1 << 5)
#define RT5631_M_AXIR_RECMIXR_BIT 5
#define RT5631_M_MONO_IN_TO_RECMIXER_R (0x1 << 4)
#define RT5631_M_MONO_IN_RECMIXR_BIT 4
/* Left Output Mixer Control(0x1A) */
#define RT5631_M_RECMIXER_L_TO_OUTMIXER_L (0x1 << 15)
#define RT5631_M_RECMIXL_OUTMIXL_BIT 15
#define RT5631_M_RECMIXER_R_TO_OUTMIXER_L (0x1 << 14)
#define RT5631_M_RECMIXR_OUTMIXL_BIT 14
#define RT5631_M_DAC_L_TO_OUTMIXER_L (0x1 << 13)
#define RT5631_M_DACL_OUTMIXL_BIT 13
#define RT5631_M_MIC1_TO_OUTMIXER_L (0x1 << 12)
#define RT5631_M_MIC1_OUTMIXL_BIT 12
#define RT5631_M_MIC2_TO_OUTMIXER_L (0x1 << 11)
#define RT5631_M_MIC2_OUTMIXL_BIT 11
#define RT5631_M_MONO_IN_P_TO_OUTMIXER_L (0x1 << 10)
#define RT5631_M_MONO_INP_OUTMIXL_BIT 10
#define RT5631_M_AXIL_TO_OUTMIXER_L (0x1 << 9)
#define RT5631_M_AXIL_OUTMIXL_BIT 9
#define RT5631_M_AXIR_TO_OUTMIXER_L (0x1 << 8)
#define RT5631_M_AXIR_OUTMIXL_BIT 8
#define RT5631_M_VDAC_TO_OUTMIXER_L (0x1 << 7)
#define RT5631_M_VDAC_OUTMIXL_BIT 7
/* Right Output Mixer Control(0x1C) */
#define RT5631_M_RECMIXER_L_TO_OUTMIXER_R (0x1 << 15)
#define RT5631_M_RECMIXL_OUTMIXR_BIT 15
#define RT5631_M_RECMIXER_R_TO_OUTMIXER_R (0x1 << 14)
#define RT5631_M_RECMIXR_OUTMIXR_BIT 14
#define RT5631_M_DAC_R_TO_OUTMIXER_R (0x1 << 13)
#define RT5631_M_DACR_OUTMIXR_BIT 13
#define RT5631_M_MIC1_TO_OUTMIXER_R (0x1 << 12)
#define RT5631_M_MIC1_OUTMIXR_BIT 12
#define RT5631_M_MIC2_TO_OUTMIXER_R (0x1 << 11)
#define RT5631_M_MIC2_OUTMIXR_BIT 11
#define RT5631_M_MONO_IN_N_TO_OUTMIXER_R (0x1 << 10)
#define RT5631_M_MONO_INN_OUTMIXR_BIT 10
#define RT5631_M_AXIL_TO_OUTMIXER_R (0x1 << 9)
#define RT5631_M_AXIL_OUTMIXR_BIT 9
#define RT5631_M_AXIR_TO_OUTMIXER_R (0x1 << 8)
#define RT5631_M_AXIR_OUTMIXR_BIT 8
#define RT5631_M_VDAC_TO_OUTMIXER_R (0x1 << 7)
#define RT5631_M_VDAC_OUTMIXR_BIT 7
/* Lout Mixer Control(0x1E) */
#define RT5631_M_MIC1_TO_AXO1MIXER (0x1 << 15)
#define RT5631_M_MIC1_AXO1MIX_BIT 15
#define RT5631_M_MIC2_TO_AXO1MIXER (0x1 << 11)
#define RT5631_M_MIC2_AXO1MIX_BIT 11
#define RT5631_M_OUTMIXER_L_TO_AXO1MIXER (0x1 << 7)
#define RT5631_M_OUTMIXL_AXO1MIX_BIT 7
#define RT5631_M_OUTMIXER_R_TO_AXO1MIXER (0x1 << 6)
#define RT5631_M_OUTMIXR_AXO1MIX_BIT 6
/* Rout Mixer Control(0x20) */
#define RT5631_M_MIC1_TO_AXO2MIXER (0x1 << 15)
#define RT5631_M_MIC1_AXO2MIX_BIT 15
#define RT5631_M_MIC2_TO_AXO2MIXER (0x1 << 11)
#define RT5631_M_MIC2_AXO2MIX_BIT 11
#define RT5631_M_OUTMIXER_L_TO_AXO2MIXER (0x1 << 7)
#define RT5631_M_OUTMIXL_AXO2MIX_BIT 7
#define RT5631_M_OUTMIXER_R_TO_AXO2MIXER (0x1 << 6)
#define RT5631_M_OUTMIXR_AXO2MIX_BIT 6
/* Micphone Input Control 2(0x22) */
#define RT5631_MIC_BIAS_90_PRECNET_AVDD 1
#define RT5631_MIC_BIAS_75_PRECNET_AVDD 2
#define RT5631_MIC1_BOOST_CTRL_MASK (0xf << 12)
#define RT5631_MIC1_BOOST_CTRL_BYPASS (0x0 << 12)
#define RT5631_MIC1_BOOST_CTRL_20DB (0x1 << 12)
#define RT5631_MIC1_BOOST_CTRL_24DB (0x2 << 12)
#define RT5631_MIC1_BOOST_CTRL_30DB (0x3 << 12)
#define RT5631_MIC1_BOOST_CTRL_35DB (0x4 << 12)
#define RT5631_MIC1_BOOST_CTRL_40DB (0x5 << 12)
#define RT5631_MIC1_BOOST_CTRL_34DB (0x6 << 12)
#define RT5631_MIC1_BOOST_CTRL_50DB (0x7 << 12)
#define RT5631_MIC1_BOOST_CTRL_52DB (0x8 << 12)
#define RT5631_MIC1_BOOST_SHIFT 12
#define RT5631_MIC2_BOOST_CTRL_MASK (0xf << 8)
#define RT5631_MIC2_BOOST_CTRL_BYPASS (0x0 << 8)
#define RT5631_MIC2_BOOST_CTRL_20DB (0x1 << 8)
#define RT5631_MIC2_BOOST_CTRL_24DB (0x2 << 8)
#define RT5631_MIC2_BOOST_CTRL_30DB (0x3 << 8)
#define RT5631_MIC2_BOOST_CTRL_35DB (0x4 << 8)
#define RT5631_MIC2_BOOST_CTRL_40DB (0x5 << 8)
#define RT5631_MIC2_BOOST_CTRL_34DB (0x6 << 8)
#define RT5631_MIC2_BOOST_CTRL_50DB (0x7 << 8)
#define RT5631_MIC2_BOOST_CTRL_52DB (0x8 << 8)
#define RT5631_MIC2_BOOST_SHIFT 8
#define RT5631_MICBIAS1_VOLT_CTRL_MASK (0x1 << 7)
#define RT5631_MICBIAS1_VOLT_CTRL_90P (0x0 << 7)
#define RT5631_MICBIAS1_VOLT_CTRL_75P (0x1 << 7)
#define RT5631_MICBIAS1_S_C_DET_MASK (0x1 << 6)
#define RT5631_MICBIAS1_S_C_DET_DIS (0x0 << 6)
#define RT5631_MICBIAS1_S_C_DET_ENA (0x1 << 6)
#define RT5631_MICBIAS1_SHORT_CURR_DET_MASK (0x3 << 4)
#define RT5631_MICBIAS1_SHORT_CURR_DET_600UA (0x0 << 4)
#define RT5631_MICBIAS1_SHORT_CURR_DET_1500UA (0x1 << 4)
#define RT5631_MICBIAS1_SHORT_CURR_DET_2000UA (0x2 << 4)
#define RT5631_MICBIAS2_VOLT_CTRL_MASK (0x1 << 3)
#define RT5631_MICBIAS2_VOLT_CTRL_90P (0x0 << 3)
#define RT5631_MICBIAS2_VOLT_CTRL_75P (0x1 << 3)
#define RT5631_MICBIAS2_S_C_DET_MASK (0x1 << 2)
#define RT5631_MICBIAS2_S_C_DET_DIS (0x0 << 2)
#define RT5631_MICBIAS2_S_C_DET_ENA (0x1 << 2)
#define RT5631_MICBIAS2_SHORT_CURR_DET_MASK (0x3)
#define RT5631_MICBIAS2_SHORT_CURR_DET_600UA (0x0)
#define RT5631_MICBIAS2_SHORT_CURR_DET_1500UA (0x1)
#define RT5631_MICBIAS2_SHORT_CURR_DET_2000UA (0x2)
/* Digital Microphone Control(0x24) */
#define RT5631_DMIC_ENA_MASK (0x1 << 15)
#define RT5631_DMIC_ENA_SHIFT 15
/* DMIC_ENA: DMIC to ADC Digital filter */
#define RT5631_DMIC_ENA (0x1 << 15)
/* DMIC_DIS: ADC mixer to ADC Digital filter */
#define RT5631_DMIC_DIS (0x0 << 15)
#define RT5631_DMIC_L_CH_MUTE (0x1 << 13)
#define RT5631_DMIC_L_CH_MUTE_SHIFT 13
#define RT5631_DMIC_R_CH_MUTE (0x1 << 12)
#define RT5631_DMIC_R_CH_MUTE_SHIFT 12
#define RT5631_DMIC_L_CH_LATCH_MASK (0x1 << 9)
#define RT5631_DMIC_L_CH_LATCH_RISING (0x1 << 9)
#define RT5631_DMIC_L_CH_LATCH_FALLING (0x0 << 9)
#define RT5631_DMIC_R_CH_LATCH_MASK (0x1 << 8)
#define RT5631_DMIC_R_CH_LATCH_RISING (0x1 << 8)
#define RT5631_DMIC_R_CH_LATCH_FALLING (0x0 << 8)
#define RT5631_DMIC_CLK_CTRL_MASK (0x3 << 4)
#define RT5631_DMIC_CLK_CTRL_TO_128FS (0x0 << 4)
#define RT5631_DMIC_CLK_CTRL_TO_64FS (0x1 << 4)
#define RT5631_DMIC_CLK_CTRL_TO_32FS (0x2 << 4)
/* Microphone Input Volume(0x26) */
#define RT5631_MONO_DIFF_INPUT_SHIFT 15
/* Speaker Mixer Control(0x28) */
#define RT5631_M_RECMIXER_L_TO_SPKMIXER_L (0x1 << 15)
#define RT5631_M_RECMIXL_SPKMIXL_BIT 15
#define RT5631_M_MIC1_P_TO_SPKMIXER_L (0x1 << 14)
#define RT5631_M_MIC1P_SPKMIXL_BIT 14
#define RT5631_M_DAC_L_TO_SPKMIXER_L (0x1 << 13)
#define RT5631_M_DACL_SPKMIXL_BIT 13
#define RT5631_M_OUTMIXER_L_TO_SPKMIXER_L (0x1 << 12)
#define RT5631_M_OUTMIXL_SPKMIXL_BIT 12
#define RT5631_M_RECMIXER_R_TO_SPKMIXER_R (0x1 << 7)
#define RT5631_M_RECMIXR_SPKMIXR_BIT 7
#define RT5631_M_MIC2_P_TO_SPKMIXER_R (0x1 << 6)
#define RT5631_M_MIC2P_SPKMIXR_BIT 6
#define RT5631_M_DAC_R_TO_SPKMIXER_R (0x1 << 5)
#define RT5631_M_DACR_SPKMIXR_BIT 5
#define RT5631_M_OUTMIXER_R_TO_SPKMIXER_R (0x1 << 4)
#define RT5631_M_OUTMIXR_SPKMIXR_BIT 4
/* Speaker/Mono Output Control(0x2A) */
#define RT5631_M_SPKVOL_L_TO_SPOL_MIXER (0x1 << 15)
#define RT5631_M_SPKVOLL_SPOLMIX_BIT 15
#define RT5631_M_SPKVOL_R_TO_SPOL_MIXER (0x1 << 14)
#define RT5631_M_SPKVOLR_SPOLMIX_BIT 14
#define RT5631_M_SPKVOL_L_TO_SPOR_MIXER (0x1 << 13)
#define RT5631_M_SPKVOLL_SPORMIX_BIT 13
#define RT5631_M_SPKVOL_R_TO_SPOR_MIXER (0x1 << 12)
#define RT5631_M_SPKVOLR_SPORMIX_BIT 12
#define RT5631_M_OUTVOL_L_TO_MONOMIXER (0x1 << 11)
#define RT5631_M_OUTVOLL_MONOMIX_BIT 11
#define RT5631_M_OUTVOL_R_TO_MONOMIXER (0x1 << 10)
#define RT5631_M_OUTVOLR_MONOMIX_BIT 10
/* Speaker/Mono/HP Output Control(0x2C) */
#define RT5631_SPK_L_MUX_SEL_MASK (0x3 << 14)
#define RT5631_SPK_L_MUX_SEL_SPKMIXER_L (0x0 << 14)
#define RT5631_SPK_L_MUX_SEL_MONO_IN (0x1 << 14)
#define RT5631_SPK_L_MUX_SEL_DAC_L (0x3 << 14)
#define RT5631_SPK_L_MUX_SEL_SHIFT 14
#define RT5631_SPK_R_MUX_SEL_MASK (0x3 << 10)
#define RT5631_SPK_R_MUX_SEL_SPKMIXER_R (0x0 << 10)
#define RT5631_SPK_R_MUX_SEL_MONO_IN (0x1 << 10)
#define RT5631_SPK_R_MUX_SEL_DAC_R (0x3 << 10)
#define RT5631_SPK_R_MUX_SEL_SHIFT 10
#define RT5631_MONO_MUX_SEL_MASK (0x3 << 6)
#define RT5631_MONO_MUX_SEL_MONOMIXER (0x0 << 6)
#define RT5631_MONO_MUX_SEL_MONO_IN (0x1 << 6)
#define RT5631_MONO_MUX_SEL_SHIFT 6
#define RT5631_HP_L_MUX_SEL_MASK (0x1 << 3)
#define RT5631_HP_L_MUX_SEL_HPVOL_L (0x0 << 3)
#define RT5631_HP_L_MUX_SEL_DAC_L (0x1 << 3)
#define RT5631_HP_L_MUX_SEL_SHIFT 3
#define RT5631_HP_R_MUX_SEL_MASK (0x1 << 2)
#define RT5631_HP_R_MUX_SEL_HPVOL_R (0x0 << 2)
#define RT5631_HP_R_MUX_SEL_DAC_R (0x1 << 2)
#define RT5631_HP_R_MUX_SEL_SHIFT 2
/* Stereo I2S Serial Data Port Control(0x34) */
#define RT5631_SDP_MODE_SEL_MASK (0x1 << 15)
#define RT5631_SDP_MODE_SEL_MASTER (0x0 << 15)
#define RT5631_SDP_MODE_SEL_SLAVE (0x1 << 15)
#define RT5631_SDP_ADC_CPS_SEL_MASK (0x3 << 10)
#define RT5631_SDP_ADC_CPS_SEL_OFF (0x0 << 10)
#define RT5631_SDP_ADC_CPS_SEL_U_LAW (0x1 << 10)
#define RT5631_SDP_ADC_CPS_SEL_A_LAW (0x2 << 10)
#define RT5631_SDP_DAC_CPS_SEL_MASK (0x3 << 8)
#define RT5631_SDP_DAC_CPS_SEL_OFF (0x0 << 8)
#define RT5631_SDP_DAC_CPS_SEL_U_LAW (0x1 << 8)
#define RT5631_SDP_DAC_CPS_SEL_A_LAW (0x2 << 8)
/* 0:Normal 1:Invert */
#define RT5631_SDP_I2S_BCLK_POL_CTRL (0x1 << 7)
/* 0:Normal 1:Invert */
#define RT5631_SDP_DAC_R_INV (0x1 << 6)
/* 0:ADC data appear at left phase of LRCK
* 1:ADC data appear at right phase of LRCK
*/
#define RT5631_SDP_ADC_DATA_L_R_SWAP (0x1 << 5)
/* 0:DAC data appear at left phase of LRCK
* 1:DAC data appear at right phase of LRCK
*/
#define RT5631_SDP_DAC_DATA_L_R_SWAP (0x1 << 4)
/* Data Length Slection */
#define RT5631_SDP_I2S_DL_MASK (0x3 << 2)
#define RT5631_SDP_I2S_DL_16 (0x0 << 2)
#define RT5631_SDP_I2S_DL_20 (0x1 << 2)
#define RT5631_SDP_I2S_DL_24 (0x2 << 2)
#define RT5631_SDP_I2S_DL_8 (0x3 << 2)
/* PCM Data Format Selection */
#define RT5631_SDP_I2S_DF_MASK (0x3)
#define RT5631_SDP_I2S_DF_I2S (0x0)
#define RT5631_SDP_I2S_DF_LEFT (0x1)
#define RT5631_SDP_I2S_DF_PCM_A (0x2)
#define RT5631_SDP_I2S_DF_PCM_B (0x3)
/* Stereo AD/DA Clock Control(0x38h) */
#define RT5631_I2S_PRE_DIV_MASK (0x7 << 13)
#define RT5631_I2S_PRE_DIV_1 (0x0 << 13)
#define RT5631_I2S_PRE_DIV_2 (0x1 << 13)
#define RT5631_I2S_PRE_DIV_4 (0x2 << 13)
#define RT5631_I2S_PRE_DIV_8 (0x3 << 13)
#define RT5631_I2S_PRE_DIV_16 (0x4 << 13)
#define RT5631_I2S_PRE_DIV_32 (0x5 << 13)
/* CLOCK RELATIVE OF BCLK AND LCRK */
#define RT5631_I2S_LRCK_SEL_N_BCLK_MASK (0x1 << 12)
#define RT5631_I2S_LRCK_SEL_64_BCLK (0x0 << 12) /* 64FS */
#define RT5631_I2S_LRCK_SEL_32_BCLK (0x1 << 12) /* 32FS */
#define RT5631_DAC_OSR_SEL_MASK (0x3 << 10)
#define RT5631_DAC_OSR_SEL_128FS (0x3 << 10)
#define RT5631_DAC_OSR_SEL_64FS (0x3 << 10)
#define RT5631_DAC_OSR_SEL_32FS (0x3 << 10)
#define RT5631_DAC_OSR_SEL_16FS (0x3 << 10)
#define RT5631_ADC_OSR_SEL_MASK (0x3 << 8)
#define RT5631_ADC_OSR_SEL_128FS (0x3 << 8)
#define RT5631_ADC_OSR_SEL_64FS (0x3 << 8)
#define RT5631_ADC_OSR_SEL_32FS (0x3 << 8)
#define RT5631_ADC_OSR_SEL_16FS (0x3 << 8)
#define RT5631_ADDA_FILTER_CLK_SEL_256FS (0 << 7) /* 256FS */
#define RT5631_ADDA_FILTER_CLK_SEL_384FS (1 << 7) /* 384FS */
/* Power managment addition 1 (0x3A) */
#define RT5631_PWR_MAIN_I2S_EN (0x1 << 15)
#define RT5631_PWR_MAIN_I2S_BIT 15
#define RT5631_PWR_CLASS_D (0x1 << 12)
#define RT5631_PWR_CLASS_D_BIT 12
#define RT5631_PWR_ADC_L_CLK (0x1 << 11)
#define RT5631_PWR_ADC_L_CLK_BIT 11
#define RT5631_PWR_ADC_R_CLK (0x1 << 10)
#define RT5631_PWR_ADC_R_CLK_BIT 10
#define RT5631_PWR_DAC_L_CLK (0x1 << 9)
#define RT5631_PWR_DAC_L_CLK_BIT 9
#define RT5631_PWR_DAC_R_CLK (0x1 << 8)
#define RT5631_PWR_DAC_R_CLK_BIT 8
#define RT5631_PWR_DAC_REF (0x1 << 7)
#define RT5631_PWR_DAC_REF_BIT 7
#define RT5631_PWR_DAC_L_TO_MIXER (0x1 << 6)
#define RT5631_PWR_DAC_L_TO_MIXER_BIT 6
#define RT5631_PWR_DAC_R_TO_MIXER (0x1 << 5)
#define RT5631_PWR_DAC_R_TO_MIXER_BIT 5
/* Power managment addition 2 (0x3B) */
#define RT5631_PWR_OUTMIXER_L (0x1 << 15)
#define RT5631_PWR_OUTMIXER_L_BIT 15
#define RT5631_PWR_OUTMIXER_R (0x1 << 14)
#define RT5631_PWR_OUTMIXER_R_BIT 14
#define RT5631_PWR_SPKMIXER_L (0x1 << 13)
#define RT5631_PWR_SPKMIXER_L_BIT 13
#define RT5631_PWR_SPKMIXER_R (0x1 << 12)
#define RT5631_PWR_SPKMIXER_R_BIT 12
#define RT5631_PWR_RECMIXER_L (0x1 << 11)
#define RT5631_PWR_RECMIXER_L_BIT 11
#define RT5631_PWR_RECMIXER_R (0x1 << 10)
#define RT5631_PWR_RECMIXER_R_BIT 10
#define RT5631_PWR_MIC1_BOOT_GAIN (0x1 << 5)
#define RT5631_PWR_MIC1_BOOT_GAIN_BIT 5
#define RT5631_PWR_MIC2_BOOT_GAIN (0x1 << 4)
#define RT5631_PWR_MIC2_BOOT_GAIN_BIT 4
#define RT5631_PWR_MICBIAS1_VOL (0x1 << 3)
#define RT5631_PWR_MICBIAS1_VOL_BIT 3
#define RT5631_PWR_MICBIAS2_VOL (0x1 << 2)
#define RT5631_PWR_MICBIAS2_VOL_BIT 2
#define RT5631_PWR_PLL1 (0x1 << 1)
#define RT5631_PWR_PLL1_BIT 1
#define RT5631_PWR_PLL2 (0x1 << 0)
#define RT5631_PWR_PLL2_BIT 0
/* Power managment addition 3(0x3C) */
#define RT5631_PWR_VREF (0x1 << 15)
#define RT5631_PWR_VREF_BIT 15
#define RT5631_PWR_FAST_VREF_CTRL (0x1 << 14)
#define RT5631_PWR_FAST_VREF_CTRL_BIT 14
#define RT5631_PWR_MAIN_BIAS (0x1 << 13)
#define RT5631_PWR_MAIN_BIAS_BIT 13
#define RT5631_PWR_AXO1MIXER (0x1 << 11)
#define RT5631_PWR_AXO1MIXER_BIT 11
#define RT5631_PWR_AXO2MIXER (0x1 << 10)
#define RT5631_PWR_AXO2MIXER_BIT 10
#define RT5631_PWR_MONOMIXER (0x1 << 9)
#define RT5631_PWR_MONOMIXER_BIT 9
#define RT5631_PWR_MONO_DEPOP_DIS (0x1 << 8)
#define RT5631_PWR_MONO_DEPOP_DIS_BIT 8
#define RT5631_PWR_MONO_AMP_EN (0x1 << 7)
#define RT5631_PWR_MONO_AMP_EN_BIT 7
#define RT5631_PWR_CHARGE_PUMP (0x1 << 4)
#define RT5631_PWR_CHARGE_PUMP_BIT 4
#define RT5631_PWR_HP_L_AMP (0x1 << 3)
#define RT5631_PWR_HP_L_AMP_BIT 3
#define RT5631_PWR_HP_R_AMP (0x1 << 2)
#define RT5631_PWR_HP_R_AMP_BIT 2
#define RT5631_PWR_HP_DEPOP_DIS (0x1 << 1)
#define RT5631_PWR_HP_DEPOP_DIS_BIT 1
#define RT5631_PWR_HP_AMP_DRIVING (0x1 << 0)
#define RT5631_PWR_HP_AMP_DRIVING_BIT 0
/* Power managment addition 4(0x3E) */
#define RT5631_PWR_SPK_L_VOL (0x1 << 15)
#define RT5631_PWR_SPK_L_VOL_BIT 15
#define RT5631_PWR_SPK_R_VOL (0x1 << 14)
#define RT5631_PWR_SPK_R_VOL_BIT 14
#define RT5631_PWR_LOUT_VOL (0x1 << 13)
#define RT5631_PWR_LOUT_VOL_BIT 13
#define RT5631_PWR_ROUT_VOL (0x1 << 12)
#define RT5631_PWR_ROUT_VOL_BIT 12
#define RT5631_PWR_HP_L_OUT_VOL (0x1 << 11)
#define RT5631_PWR_HP_L_OUT_VOL_BIT 11
#define RT5631_PWR_HP_R_OUT_VOL (0x1 << 10)
#define RT5631_PWR_HP_R_OUT_VOL_BIT 10
#define RT5631_PWR_AXIL_IN_VOL (0x1 << 9)
#define RT5631_PWR_AXIL_IN_VOL_BIT 9
#define RT5631_PWR_AXIR_IN_VOL (0x1 << 8)
#define RT5631_PWR_AXIR_IN_VOL_BIT 8
#define RT5631_PWR_MONO_IN_P_VOL (0x1 << 7)
#define RT5631_PWR_MONO_IN_P_VOL_BIT 7
#define RT5631_PWR_MONO_IN_N_VOL (0x1 << 6)
#define RT5631_PWR_MONO_IN_N_VOL_BIT 6
/* General Purpose Control Register(0x40) */
#define RT5631_SPK_AMP_AUTO_RATIO_EN (0x1 << 15)
#define RT5631_SPK_AMP_RATIO_CTRL_MASK (0x7 << 12)
#define RT5631_SPK_AMP_RATIO_CTRL_2_34 (0x0 << 12) /* 7.40DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_99 (0x1 << 12) /* 5.99DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_68 (0x2 << 12) /* 4.50DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_56 (0x3 << 12) /* 3.86DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_44 (0x4 << 12) /* 3.16DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_27 (0x5 << 12) /* 2.10DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_09 (0x6 << 12) /* 0.80DB */
#define RT5631_SPK_AMP_RATIO_CTRL_1_00 (0x7 << 12) /* 0.00DB */
#define RT5631_SPK_AMP_RATIO_CTRL_SHIFT 12
#define RT5631_STEREO_DAC_HI_PASS_FILT_EN (0x1 << 11)
#define RT5631_STEREO_ADC_HI_PASS_FILT_EN (0x1 << 10)
/* Select ADC Wind Filter Clock type */
#define RT5631_ADC_WIND_FILT_MASK (0x3 << 4)
#define RT5631_ADC_WIND_FILT_8_16_32K (0x0 << 4) /*8/16/32k*/
#define RT5631_ADC_WIND_FILT_11_22_44K (0x1 << 4) /*11/22/44k*/
#define RT5631_ADC_WIND_FILT_12_24_48K (0x2 << 4) /*12/24/48k*/
#define RT5631_ADC_WIND_FILT_EN (0x1 << 3)
/* SelectADC Wind Filter Corner Frequency */
#define RT5631_ADC_WIND_CNR_FREQ_MASK (0x7 << 0)
#define RT5631_ADC_WIND_CNR_FREQ_82_113_122 (0x0 << 0) /* 82/113/122 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_102_141_153 (0x1 << 0) /* 102/141/153 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_131_180_156 (0x2 << 0) /* 131/180/156 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_163_225_245 (0x3 << 0) /* 163/225/245 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_204_281_306 (0x4 << 0) /* 204/281/306 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_261_360_392 (0x5 << 0) /* 261/360/392 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_327_450_490 (0x6 << 0) /* 327/450/490 Hz */
#define RT5631_ADC_WIND_CNR_FREQ_408_563_612 (0x7 << 0) /* 408/563/612 Hz */
/* Global Clock Control Register(0x42) */
#define RT5631_SYSCLK_SOUR_SEL_MASK (0x3 << 14)
#define RT5631_SYSCLK_SOUR_SEL_MCLK (0x0 << 14)
#define RT5631_SYSCLK_SOUR_SEL_PLL (0x1 << 14)
#define RT5631_SYSCLK_SOUR_SEL_PLL_TCK (0x2 << 14)
#define RT5631_PLLCLK_SOUR_SEL_MASK (0x3 << 12)
#define RT5631_PLLCLK_SOUR_SEL_MCLK (0x0 << 12)
#define RT5631_PLLCLK_SOUR_SEL_BCLK (0x1 << 12)
#define RT5631_PLLCLK_SOUR_SEL_VBCLK (0x2 << 12)
#define RT5631_PLLCLK_PRE_DIV1 (0x0 << 11)
#define RT5631_PLLCLK_PRE_DIV2 (0x1 << 11)
/* PLL Control(0x44) */
#define RT5631_PLL_CTRL_M_VAL(m) ((m)&0xf)
#define RT5631_PLL_CTRL_K_VAL(k) (((k)&0x7) << 4)
#define RT5631_PLL_CTRL_N_VAL(n) (((n)&0xff) << 8)
/* Internal Status and IRQ Control2(0x4A) */
#define RT5631_ADC_DATA_SEL_MASK (0x3 << 14)
#define RT5631_ADC_DATA_SEL_Disable (0x0 << 14)
#define RT5631_ADC_DATA_SEL_MIC1 (0x1 << 14)
#define RT5631_ADC_DATA_SEL_MIC1_SHIFT 14
#define RT5631_ADC_DATA_SEL_MIC2 (0x2 << 14)
#define RT5631_ADC_DATA_SEL_MIC2_SHIFT 15
#define RT5631_ADC_DATA_SEL_STO (0x3 << 14)
#define RT5631_ADC_DATA_SEL_SHIFT 14
/* GPIO Pin Configuration(0x4C) */
#define RT5631_GPIO_PIN_FUN_SEL_MASK (0x1 << 15)
#define RT5631_GPIO_PIN_FUN_SEL_IRQ (0x1 << 15)
#define RT5631_GPIO_PIN_FUN_SEL_GPIO_DIMC (0x0 << 15)
#define RT5631_GPIO_DMIC_FUN_SEL_MASK (0x1 << 3)
#define RT5631_GPIO_DMIC_FUN_SEL_DIMC (0x1 << 3)
#define RT5631_GPIO_DMIC_FUN_SEL_GPIO (0x0 << 3)
#define RT5631_GPIO_PIN_CON_MASK (0x1 << 2)
#define RT5631_GPIO_PIN_SET_INPUT (0x0 << 2)
#define RT5631_GPIO_PIN_SET_OUTPUT (0x1 << 2)
/* De-POP function Control 1(0x54) */
#define RT5631_POW_ON_SOFT_GEN (0x1 << 15)
#define RT5631_EN_MUTE_UNMUTE_DEPOP (0x1 << 14)
#define RT5631_EN_DEPOP2_FOR_HP (0x1 << 7)
/* Power Down HPAMP_L Starts Up Signal */
#define RT5631_PD_HPAMP_L_ST_UP (0x1 << 5)
/* Power Down HPAMP_R Starts Up Signal */
#define RT5631_PD_HPAMP_R_ST_UP (0x1 << 4)
/* Enable left HP mute/unmute depop */
#define RT5631_EN_HP_L_M_UN_MUTE_DEPOP (0x1 << 1)
/* Enable right HP mute/unmute depop */
#define RT5631_EN_HP_R_M_UN_MUTE_DEPOP (0x1 << 0)
/* De-POP Fnction Control(0x56) */
#define RT5631_EN_ONE_BIT_DEPOP (0x1 << 15)
#define RT5631_EN_CAP_FREE_DEPOP (0x1 << 14)
/* Jack Detect Control Register(0x5A) */
#define RT5631_JD_USE_MASK (0x3 << 14)
#define RT5631_JD_USE_JD2 (0x3 << 14)
#define RT5631_JD_USE_JD1 (0x2 << 14)
#define RT5631_JD_USE_GPIO (0x1 << 14)
#define RT5631_JD_OFF (0x0 << 14)
/* JD trigger enable for HP */
#define RT5631_JD_HP_EN (0x1 << 11)
#define RT5631_JD_HP_TRI_MASK (0x1 << 10)
#define RT5631_JD_HP_TRI_HI (0x1 << 10)
#define RT5631_JD_HP_TRI_LO (0x1 << 10)
/* JD trigger enable for speaker LP/LN */
#define RT5631_JD_SPK_L_EN (0x1 << 9)
#define RT5631_JD_SPK_L_TRI_MASK (0x1 << 8)
#define RT5631_JD_SPK_L_TRI_HI (0x1 << 8)
#define RT5631_JD_SPK_L_TRI_LO (0x0 << 8)
/* JD trigger enable for speaker RP/RN */
#define RT5631_JD_SPK_R_EN (0x1 << 7)
#define RT5631_JD_SPK_R_TRI_MASK (0x1 << 6)
#define RT5631_JD_SPK_R_TRI_HI (0x1 << 6)
#define RT5631_JD_SPK_R_TRI_LO (0x0 << 6)
/* JD trigger enable for monoout */
#define RT5631_JD_MONO_EN (0x1 << 5)
#define RT5631_JD_MONO_TRI_MASK (0x1 << 4)
#define RT5631_JD_MONO_TRI_HI (0x1 << 4)
#define RT5631_JD_MONO_TRI_LO (0x0 << 4)
/* JD trigger enable for Lout */
#define RT5631_JD_AUX_1_EN (0x1 << 3)
#define RT5631_JD_AUX_1_MASK (0x1 << 2)
#define RT5631_JD_AUX_1_TRI_HI (0x1 << 2)
#define RT5631_JD_AUX_1_TRI_LO (0x0 << 2)
/* JD trigger enable for Rout */
#define RT5631_JD_AUX_2_EN (0x1 << 1)
#define RT5631_JD_AUX_2_MASK (0x1 << 0)
#define RT5631_JD_AUX_2_TRI_HI (0x1 << 0)
#define RT5631_JD_AUX_2_TRI_LO (0x0 << 0)
/* ALC CONTROL 1(0x64) */
#define RT5631_ALC_ATTACK_RATE_MASK (0x1F << 8)
#define RT5631_ALC_RECOVERY_RATE_MASK (0x1F << 0)
/* ALC CONTROL 2(0x65) */
/* select Compensation gain for Noise gate function */
#define RT5631_ALC_COM_NOISE_GATE_MASK (0xF << 0)
/* ALC CONTROL 3(0x66) */
#define RT5631_ALC_FUN_MASK (0x3 << 14)
#define RT5631_ALC_FUN_DIS (0x0 << 14)
#define RT5631_ALC_ENA_DAC_PATH (0x1 << 14)
#define RT5631_ALC_ENA_ADC_PATH (0x3 << 14)
#define RT5631_ALC_PARA_UPDATE (0x1 << 13)
#define RT5631_ALC_LIMIT_LEVEL_MASK (0x1F << 8)
#define RT5631_ALC_NOISE_GATE_FUN_MASK (0x1 << 7)
#define RT5631_ALC_NOISE_GATE_FUN_DIS (0x0 << 7)
#define RT5631_ALC_NOISE_GATE_FUN_ENA (0x1 << 7)
/* ALC noise gate hold data function */
#define RT5631_ALC_NOISE_GATE_H_D_MASK (0x1 << 6)
#define RT5631_ALC_NOISE_GATE_H_D_DIS (0x0 << 6)
#define RT5631_ALC_NOISE_GATE_H_D_ENA (0x1 << 6)
/* Psedueo Stereo & Spatial Effect Block Control(0x68) */
#define RT5631_SPATIAL_CTRL_EN (0x1 << 15)
#define RT5631_ALL_PASS_FILTER_EN (0x1 << 14)
#define RT5631_PSEUDO_STEREO_EN (0x1 << 13)
#define RT5631_STEREO_EXPENSION_EN (0x1 << 12)
/* 3D gain parameter */
#define RT5631_GAIN_3D_PARA_MASK (0x3 << 6)
#define RT5631_GAIN_3D_PARA_1_00 (0x0 << 6) /* 3D gain 1.0 */
#define RT5631_GAIN_3D_PARA_1_50 (0x1 << 6) /* 3D gain 1.5 */
#define RT5631_GAIN_3D_PARA_2_00 (0x2 << 6) /* 3D gain 2.0 */
/* 3D ratio parameter */
#define RT5631_RATIO_3D_MASK (0x3 << 4)
#define RT5631_RATIO_3D_0_0 (0x0 << 4) /* 3D ratio 0.0 */
#define RT5631_RATIO_3D_0_66 (0x1 << 4) /* 3D ratio 0.66 */
#define RT5631_RATIO_3D_1_0 (0x2 << 4) /* 3D ratio 1.0 */
/* select samplerate for all pass filter */
#define RT5631_APF_FUN_SLE_MASK (0x3 << 0)
#define RT5631_APF_FUN_SEL_48K (0x3 << 0)
#define RT5631_APF_FUN_SEL_44_1K (0x2 << 0)
#define RT5631_APF_FUN_SEL_32K (0x1 << 0)
#define RT5631_APF_FUN_DIS (0x0 << 0)
/* EQ CONTROL 1(0x6E) */
#define RT5631_HW_EQ_PATH_SEL_MASK (0x1 << 15)
#define RT5631_HW_EQ_PATH_SEL_DAC (0x0 << 15)
#define RT5631_HW_EQ_PATH_SEL_ADC (0x1 << 15)
#define RT5631_HW_EQ_UPDATE_CTRL (0x1 << 14)
#define RT5631_EN_HW_EQ_HPF2 (0x1 << 5)
#define RT5631_EN_HW_EQ_HPF1 (0x1 << 4)
#define RT5631_EN_HW_EQ_BP3 (0x1 << 3)
#define RT5631_EN_HW_EQ_BP2 (0x1 << 2)
#define RT5631_EN_HW_EQ_BP1 (0x1 << 1)
#define RT5631_EN_HW_EQ_LPF (0x1 << 0)
#endif /* __RTCODEC5631_H__ */