linux/drivers/clk/Makefile
Stephen Boyd ff060019f4 Merge branches 'clk-stm32f4', 'clk-tegra', 'clk-at91', 'clk-sifive-fu540' and 'clk-spdx' into clk-next
- Support for STM32F769
 - Rework AT91 sckc DT bindings
 - Fix slow RC oscillator issue on sama5d3
 - AT91 sam9x60 PMC support
 - SiFive FU540 PRCI and PLL support

* clk-stm32f4:
  clk: stm32mp1: Add ddrperfm clock
  clk: stm32: Introduce clocks of STM32F769 board

* clk-tegra:
  clk: tegra: divider: Mark Memory Controller clock as read-only
  clk: tegra: emc: Replace BUG() with WARN_ONCE()
  clk: tegra: emc: Fix EMC max-rate clamping
  clk: tegra: emc: Support multiple RAM codes
  clk: tegra: emc: Don't enable EMC clock manually
  clk: tegra124: Remove lock-enable bit from PLLM
  clk: tegra: Fix PLLM programming on Tegra124+ when PMC overrides divider
  clk: tegra: Don't enable already enabled PLLs

* clk-at91:
  clk: at91: Mark struct clk_range as const
  clk: at91: add sam9x60 pmc driver
  dt-bindings: clk: at91: add bindings for SAM9X60 pmc
  clk: at91: add sam9x60 PLL driver
  clk: at91: master: Add sam9x60 support
  clk: at91: usb: Add sam9x60 support
  clk: at91: allow configuring generated PCR layout
  clk: at91: allow configuring peripheral PCR layout
  clk: at91: sckc: handle different RC startup time
  clk: at91: modernize sckc binding
  dt-bindings: clock: at91: new sckc bindings

* clk-sifive-fu540:
  clk: sifive: add a driver for the SiFive FU540 PRCI IP block
  clk: analogbits: add Wide-Range PLL library
  dt-bindings: clk: add documentation for the SiFive PRCI driver

* clk-spdx:
  clk: sunxi-ng: Use the correct style for SPDX License Identifier
  clk: sprd: Use the correct style for SPDX License Identifier
  clk: renesas: Use the correct style for SPDX License Identifier
  clk: qcom: Use the correct style for SPDX License Identifier
  clk: davinci: Use the correct style for SPDX License Identifier
  clk: actions: Use the correct style for SPDX License Identifier
2019-05-07 11:45:29 -07:00

119 lines
4.6 KiB
Makefile

# SPDX-License-Identifier: GPL-2.0
# common clock types
obj-$(CONFIG_HAVE_CLK) += clk-devres.o clk-bulk.o
obj-$(CONFIG_CLKDEV_LOOKUP) += clkdev.o
obj-$(CONFIG_COMMON_CLK) += clk.o
obj-$(CONFIG_COMMON_CLK) += clk-divider.o
obj-$(CONFIG_COMMON_CLK) += clk-fixed-factor.o
obj-$(CONFIG_COMMON_CLK) += clk-fixed-rate.o
obj-$(CONFIG_COMMON_CLK) += clk-gate.o
obj-$(CONFIG_COMMON_CLK) += clk-multiplier.o
obj-$(CONFIG_COMMON_CLK) += clk-mux.o
obj-$(CONFIG_COMMON_CLK) += clk-composite.o
obj-$(CONFIG_COMMON_CLK) += clk-fractional-divider.o
obj-$(CONFIG_COMMON_CLK) += clk-gpio.o
ifeq ($(CONFIG_OF), y)
obj-$(CONFIG_COMMON_CLK) += clk-conf.o
endif
# hardware specific clock types
# please keep this section sorted lexicographically by file path name
obj-$(CONFIG_MACH_ASM9260) += clk-asm9260.o
obj-$(CONFIG_COMMON_CLK_AXI_CLKGEN) += clk-axi-clkgen.o
obj-$(CONFIG_ARCH_AXXIA) += clk-axm5516.o
obj-$(CONFIG_COMMON_CLK_BD718XX) += clk-bd718x7.o
obj-$(CONFIG_COMMON_CLK_CDCE706) += clk-cdce706.o
obj-$(CONFIG_COMMON_CLK_CDCE925) += clk-cdce925.o
obj-$(CONFIG_ARCH_CLPS711X) += clk-clps711x.o
obj-$(CONFIG_COMMON_CLK_CS2000_CP) += clk-cs2000-cp.o
obj-$(CONFIG_ARCH_EFM32) += clk-efm32gg.o
obj-$(CONFIG_COMMON_CLK_FIXED_MMIO) += clk-fixed-mmio.o
obj-$(CONFIG_COMMON_CLK_GEMINI) += clk-gemini.o
obj-$(CONFIG_COMMON_CLK_ASPEED) += clk-aspeed.o
obj-$(CONFIG_ARCH_HIGHBANK) += clk-highbank.o
obj-$(CONFIG_CLK_HSDK) += clk-hsdk-pll.o
obj-$(CONFIG_COMMON_CLK_LOCHNAGAR) += clk-lochnagar.o
obj-$(CONFIG_COMMON_CLK_MAX77686) += clk-max77686.o
obj-$(CONFIG_COMMON_CLK_MAX9485) += clk-max9485.o
obj-$(CONFIG_ARCH_MILBEAUT_M10V) += clk-milbeaut.o
obj-$(CONFIG_ARCH_MOXART) += clk-moxart.o
obj-$(CONFIG_ARCH_NOMADIK) += clk-nomadik.o
obj-$(CONFIG_ARCH_NPCM7XX) += clk-npcm7xx.o
obj-$(CONFIG_ARCH_NSPIRE) += clk-nspire.o
obj-$(CONFIG_COMMON_CLK_OXNAS) += clk-oxnas.o
obj-$(CONFIG_COMMON_CLK_PALMAS) += clk-palmas.o
obj-$(CONFIG_COMMON_CLK_PWM) += clk-pwm.o
obj-$(CONFIG_CLK_QORIQ) += clk-qoriq.o
obj-$(CONFIG_COMMON_CLK_RK808) += clk-rk808.o
obj-$(CONFIG_COMMON_CLK_HI655X) += clk-hi655x.o
obj-$(CONFIG_COMMON_CLK_S2MPS11) += clk-s2mps11.o
obj-$(CONFIG_COMMON_CLK_SCMI) += clk-scmi.o
obj-$(CONFIG_COMMON_CLK_SCPI) += clk-scpi.o
obj-$(CONFIG_COMMON_CLK_SI5351) += clk-si5351.o
obj-$(CONFIG_COMMON_CLK_SI514) += clk-si514.o
obj-$(CONFIG_COMMON_CLK_SI544) += clk-si544.o
obj-$(CONFIG_COMMON_CLK_SI570) += clk-si570.o
obj-$(CONFIG_COMMON_CLK_STM32F) += clk-stm32f4.o
obj-$(CONFIG_COMMON_CLK_STM32H7) += clk-stm32h7.o
obj-$(CONFIG_COMMON_CLK_STM32MP157) += clk-stm32mp1.o
obj-$(CONFIG_ARCH_TANGO) += clk-tango4.o
obj-$(CONFIG_CLK_TWL6040) += clk-twl6040.o
obj-$(CONFIG_ARCH_U300) += clk-u300.o
obj-$(CONFIG_ARCH_VT8500) += clk-vt8500.o
obj-$(CONFIG_COMMON_CLK_VC5) += clk-versaclock5.o
obj-$(CONFIG_COMMON_CLK_WM831X) += clk-wm831x.o
obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o
# please keep this section sorted lexicographically by directory path name
obj-y += actions/
obj-y += analogbits/
obj-$(CONFIG_COMMON_CLK_AT91) += at91/
obj-$(CONFIG_ARCH_ARTPEC) += axis/
obj-$(CONFIG_ARC_PLAT_AXS10X) += axs10x/
obj-y += bcm/
obj-$(CONFIG_ARCH_BERLIN) += berlin/
obj-$(CONFIG_ARCH_DAVINCI) += davinci/
obj-$(CONFIG_H8300) += h8300/
obj-$(CONFIG_ARCH_HISI) += hisilicon/
obj-y += imgtec/
obj-y += imx/
obj-y += ingenic/
obj-$(CONFIG_ARCH_K3) += keystone/
obj-$(CONFIG_ARCH_KEYSTONE) += keystone/
obj-$(CONFIG_MACH_LOONGSON32) += loongson1/
obj-y += mediatek/
obj-$(CONFIG_ARCH_MESON) += meson/
obj-$(CONFIG_MACH_PIC32) += microchip/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_ARCH_MMP) += mmp/
endif
obj-y += mvebu/
obj-$(CONFIG_ARCH_MXS) += mxs/
obj-$(CONFIG_COMMON_CLK_NXP) += nxp/
obj-$(CONFIG_MACH_PISTACHIO) += pistachio/
obj-$(CONFIG_COMMON_CLK_PXA) += pxa/
obj-$(CONFIG_COMMON_CLK_QCOM) += qcom/
obj-y += renesas/
obj-$(CONFIG_ARCH_ROCKCHIP) += rockchip/
obj-$(CONFIG_COMMON_CLK_SAMSUNG) += samsung/
obj-$(CONFIG_CLK_SIFIVE) += sifive/
obj-$(CONFIG_ARCH_SIRF) += sirf/
obj-$(CONFIG_ARCH_SOCFPGA) += socfpga/
obj-$(CONFIG_PLAT_SPEAR) += spear/
obj-$(CONFIG_ARCH_SPRD) += sprd/
obj-$(CONFIG_ARCH_STI) += st/
obj-$(CONFIG_ARCH_STRATIX10) += socfpga/
obj-$(CONFIG_ARCH_SUNXI) += sunxi/
obj-$(CONFIG_SUNXI_CCU) += sunxi-ng/
obj-$(CONFIG_ARCH_TEGRA) += tegra/
obj-y += ti/
obj-$(CONFIG_CLK_UNIPHIER) += uniphier/
obj-$(CONFIG_ARCH_U8500) += ux500/
obj-$(CONFIG_COMMON_CLK_VERSATILE) += versatile/
ifeq ($(CONFIG_COMMON_CLK), y)
obj-$(CONFIG_X86) += x86/
endif
obj-$(CONFIG_ARCH_ZX) += zte/
obj-$(CONFIG_ARCH_ZYNQ) += zynq/
obj-$(CONFIG_COMMON_CLK_ZYNQMP) += zynqmp/