Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-10 14:11:52 +00:00
Code Issues Packages Projects Releases Wiki Activity
6859e4f22a
linux/drivers/pci/ats.c
Bjorn Helgaas e0701bd0e6 PCI/ATS: Use FIELD_GET() 
Use FIELD_GET() to remove dependences on the field position, i.e., the
shift value.  No functional change intended.

Link: https://lore.kernel.org/r/20231010204436.1000644-6-helgaas@kernel.org
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
2023-10-24 16:55:45 -05:00

509 lines
11 KiB
C
Raw Blame History

// SPDX-License-Identifier: GPL-2.0
/*
* PCI Express I/O Virtualization (IOV) support
* Address Translation Service 1.0
* Page Request Interface added by Joerg Roedel <joerg.roedel@amd.com>
* PASID support added by Joerg Roedel <joerg.roedel@amd.com>
*
* Copyright (C) 2009 Intel Corporation, Yu Zhao <yu.zhao@intel.com>
* Copyright (C) 2011 Advanced Micro Devices,
*/
#include <linux/bitfield.h>
#include <linux/export.h>
#include <linux/pci-ats.h>
#include <linux/pci.h>
#include <linux/slab.h>
#include "pci.h"
void pci_ats_init(struct pci_dev *dev)
{
int pos;
if (pci_ats_disabled())
return;
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ATS);
if (!pos)
return;
dev->ats_cap = pos;
}
/**
* pci_ats_supported - check if the device can use ATS
* @dev: the PCI device
*
* Returns true if the device supports ATS and is allowed to use it, false
* otherwise.
*/
bool pci_ats_supported(struct pci_dev *dev)
{
if (!dev->ats_cap)
return false;
return (dev->untrusted == 0);
}
EXPORT_SYMBOL_GPL(pci_ats_supported);
/**
* pci_enable_ats - enable the ATS capability
* @dev: the PCI device
* @ps: the IOMMU page shift
*
* Returns 0 on success, or negative on failure.
*/
int pci_enable_ats(struct pci_dev *dev, int ps)
{
u16 ctrl;
struct pci_dev *pdev;
if (!pci_ats_supported(dev))
return -EINVAL;
if (WARN_ON(dev->ats_enabled))
return -EBUSY;
if (ps < PCI_ATS_MIN_STU)
return -EINVAL;
/*
* Note that enabling ATS on a VF fails unless it's already enabled
* with the same STU on the PF.
*/
ctrl = PCI_ATS_CTRL_ENABLE;
if (dev->is_virtfn) {
pdev = pci_physfn(dev);
if (pdev->ats_stu != ps)
return -EINVAL;
} else {
dev->ats_stu = ps;
ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
}
pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
dev->ats_enabled = 1;
return 0;
}
EXPORT_SYMBOL_GPL(pci_enable_ats);
/**
* pci_disable_ats - disable the ATS capability
* @dev: the PCI device
*/
void pci_disable_ats(struct pci_dev *dev)
{
u16 ctrl;
if (WARN_ON(!dev->ats_enabled))
return;
pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, &ctrl);
ctrl &= ~PCI_ATS_CTRL_ENABLE;
pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
dev->ats_enabled = 0;
}
EXPORT_SYMBOL_GPL(pci_disable_ats);
void pci_restore_ats_state(struct pci_dev *dev)
{
u16 ctrl;
if (!dev->ats_enabled)
return;
ctrl = PCI_ATS_CTRL_ENABLE;
if (!dev->is_virtfn)
ctrl |= PCI_ATS_CTRL_STU(dev->ats_stu - PCI_ATS_MIN_STU);
pci_write_config_word(dev, dev->ats_cap + PCI_ATS_CTRL, ctrl);
}
/**
* pci_ats_queue_depth - query the ATS Invalidate Queue Depth
* @dev: the PCI device
*
* Returns the queue depth on success, or negative on failure.
*
* The ATS spec uses 0 in the Invalidate Queue Depth field to
* indicate that the function can accept 32 Invalidate Request.
* But here we use the `real' values (i.e. 1~32) for the Queue
* Depth; and 0 indicates the function shares the Queue with
* other functions (doesn't exclusively own a Queue).
*/
int pci_ats_queue_depth(struct pci_dev *dev)
{
u16 cap;
if (!dev->ats_cap)
return -EINVAL;
if (dev->is_virtfn)
return 0;
pci_read_config_word(dev, dev->ats_cap + PCI_ATS_CAP, &cap);
return PCI_ATS_CAP_QDEP(cap) ? PCI_ATS_CAP_QDEP(cap) : PCI_ATS_MAX_QDEP;
}
/**
* pci_ats_page_aligned - Return Page Aligned Request bit status.
* @pdev: the PCI device
*
* Returns 1, if the Untranslated Addresses generated by the device
* are always aligned or 0 otherwise.
*
* Per PCIe spec r4.0, sec 10.5.1.2, if the Page Aligned Request bit
* is set, it indicates the Untranslated Addresses generated by the
* device are always aligned to a 4096 byte boundary.
*/
int pci_ats_page_aligned(struct pci_dev *pdev)
{
u16 cap;
if (!pdev->ats_cap)
return 0;
pci_read_config_word(pdev, pdev->ats_cap + PCI_ATS_CAP, &cap);
if (cap & PCI_ATS_CAP_PAGE_ALIGNED)
return 1;
return 0;
}
#ifdef CONFIG_PCI_PRI
void pci_pri_init(struct pci_dev *pdev)
{
u16 status;
pdev->pri_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PRI);
if (!pdev->pri_cap)
return;
pci_read_config_word(pdev, pdev->pri_cap + PCI_PRI_STATUS, &status);
if (status & PCI_PRI_STATUS_PASID)
pdev->pasid_required = 1;
}
/**
* pci_enable_pri - Enable PRI capability
* @pdev: PCI device structure
* @reqs: outstanding requests
*
* Returns 0 on success, negative value on error
*/
int pci_enable_pri(struct pci_dev *pdev, u32 reqs)
{
u16 control, status;
u32 max_requests;
int pri = pdev->pri_cap;
/*
* VFs must not implement the PRI Capability. If their PF
* implements PRI, it is shared by the VFs, so if the PF PRI is
* enabled, it is also enabled for the VF.
*/
if (pdev->is_virtfn) {
if (pci_physfn(pdev)->pri_enabled)
return 0;
return -EINVAL;
}
if (WARN_ON(pdev->pri_enabled))
return -EBUSY;
if (!pri)
return -EINVAL;
pci_read_config_word(pdev, pri + PCI_PRI_STATUS, &status);
if (!(status & PCI_PRI_STATUS_STOPPED))
return -EBUSY;
pci_read_config_dword(pdev, pri + PCI_PRI_MAX_REQ, &max_requests);
reqs = min(max_requests, reqs);
pdev->pri_reqs_alloc = reqs;
pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
control = PCI_PRI_CTRL_ENABLE;
pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
pdev->pri_enabled = 1;
return 0;
}
/**
* pci_disable_pri - Disable PRI capability
* @pdev: PCI device structure
*
* Only clears the enabled-bit, regardless of its former value
*/
void pci_disable_pri(struct pci_dev *pdev)
{
u16 control;
int pri = pdev->pri_cap;
/* VFs share the PF PRI */
if (pdev->is_virtfn)
return;
if (WARN_ON(!pdev->pri_enabled))
return;
if (!pri)
return;
pci_read_config_word(pdev, pri + PCI_PRI_CTRL, &control);
control &= ~PCI_PRI_CTRL_ENABLE;
pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
pdev->pri_enabled = 0;
}
EXPORT_SYMBOL_GPL(pci_disable_pri);
/**
* pci_restore_pri_state - Restore PRI
* @pdev: PCI device structure
*/
void pci_restore_pri_state(struct pci_dev *pdev)
{
u16 control = PCI_PRI_CTRL_ENABLE;
u32 reqs = pdev->pri_reqs_alloc;
int pri = pdev->pri_cap;
if (pdev->is_virtfn)
return;
if (!pdev->pri_enabled)
return;
if (!pri)
return;
pci_write_config_dword(pdev, pri + PCI_PRI_ALLOC_REQ, reqs);
pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
}
/**
* pci_reset_pri - Resets device's PRI state
* @pdev: PCI device structure
*
* The PRI capability must be disabled before this function is called.
* Returns 0 on success, negative value on error.
*/
int pci_reset_pri(struct pci_dev *pdev)
{
u16 control;
int pri = pdev->pri_cap;
if (pdev->is_virtfn)
return 0;
if (WARN_ON(pdev->pri_enabled))
return -EBUSY;
if (!pri)
return -EINVAL;
control = PCI_PRI_CTRL_RESET;
pci_write_config_word(pdev, pri + PCI_PRI_CTRL, control);
return 0;
}
/**
* pci_prg_resp_pasid_required - Return PRG Response PASID Required bit
* status.
* @pdev: PCI device structure
*
* Returns 1 if PASID is required in PRG Response Message, 0 otherwise.
*/
int pci_prg_resp_pasid_required(struct pci_dev *pdev)
{
if (pdev->is_virtfn)
pdev = pci_physfn(pdev);
return pdev->pasid_required;
}
/**
* pci_pri_supported - Check if PRI is supported.
* @pdev: PCI device structure
*
* Returns true if PRI capability is present, false otherwise.
*/
bool pci_pri_supported(struct pci_dev *pdev)
{
/* VFs share the PF PRI */
if (pci_physfn(pdev)->pri_cap)
return true;
return false;
}
EXPORT_SYMBOL_GPL(pci_pri_supported);
#endif /* CONFIG_PCI_PRI */
#ifdef CONFIG_PCI_PASID
void pci_pasid_init(struct pci_dev *pdev)
{
pdev->pasid_cap = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_PASID);
}
/**
* pci_enable_pasid - Enable the PASID capability
* @pdev: PCI device structure
* @features: Features to enable
*
* Returns 0 on success, negative value on error. This function checks
* whether the features are actually supported by the device and returns
* an error if not.
*/
int pci_enable_pasid(struct pci_dev *pdev, int features)
{
u16 control, supported;
int pasid = pdev->pasid_cap;
/*
* VFs must not implement the PASID Capability, but if a PF
* supports PASID, its VFs share the PF PASID configuration.
*/
if (pdev->is_virtfn) {
if (pci_physfn(pdev)->pasid_enabled)
return 0;
return -EINVAL;
}
if (WARN_ON(pdev->pasid_enabled))
return -EBUSY;
if (!pdev->eetlp_prefix_path && !pdev->pasid_no_tlp)
return -EINVAL;
if (!pasid)
return -EINVAL;
if (!pci_acs_path_enabled(pdev, NULL, PCI_ACS_RR | PCI_ACS_UF))
return -EINVAL;
pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
/* User wants to enable anything unsupported? */
if ((supported & features) != features)
return -EINVAL;
control = PCI_PASID_CTRL_ENABLE | features;
pdev->pasid_features = features;
pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
pdev->pasid_enabled = 1;
return 0;
}
EXPORT_SYMBOL_GPL(pci_enable_pasid);
/**
* pci_disable_pasid - Disable the PASID capability
* @pdev: PCI device structure
*/
void pci_disable_pasid(struct pci_dev *pdev)
{
u16 control = 0;
int pasid = pdev->pasid_cap;
/* VFs share the PF PASID configuration */
if (pdev->is_virtfn)
return;
if (WARN_ON(!pdev->pasid_enabled))
return;
if (!pasid)
return;
pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
pdev->pasid_enabled = 0;
}
EXPORT_SYMBOL_GPL(pci_disable_pasid);
/**
* pci_restore_pasid_state - Restore PASID capabilities
* @pdev: PCI device structure
*/
void pci_restore_pasid_state(struct pci_dev *pdev)
{
u16 control;
int pasid = pdev->pasid_cap;
if (pdev->is_virtfn)
return;
if (!pdev->pasid_enabled)
return;
if (!pasid)
return;
control = PCI_PASID_CTRL_ENABLE | pdev->pasid_features;
pci_write_config_word(pdev, pasid + PCI_PASID_CTRL, control);
}
/**
* pci_pasid_features - Check which PASID features are supported
* @pdev: PCI device structure
*
* Returns a negative value when no PASI capability is present.
* Otherwise is returns a bitmask with supported features. Current
* features reported are:
* PCI_PASID_CAP_EXEC - Execute permission supported
* PCI_PASID_CAP_PRIV - Privileged mode supported
*/
int pci_pasid_features(struct pci_dev *pdev)
{
u16 supported;
int pasid;
if (pdev->is_virtfn)
pdev = pci_physfn(pdev);
pasid = pdev->pasid_cap;
if (!pasid)
return -EINVAL;
pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
supported &= PCI_PASID_CAP_EXEC | PCI_PASID_CAP_PRIV;
return supported;
}
EXPORT_SYMBOL_GPL(pci_pasid_features);
/**
* pci_max_pasids - Get maximum number of PASIDs supported by device
* @pdev: PCI device structure
*
* Returns negative value when PASID capability is not present.
* Otherwise it returns the number of supported PASIDs.
*/
int pci_max_pasids(struct pci_dev *pdev)
{
u16 supported;
int pasid;
if (pdev->is_virtfn)
pdev = pci_physfn(pdev);
pasid = pdev->pasid_cap;
if (!pasid)
return -EINVAL;
pci_read_config_word(pdev, pasid + PCI_PASID_CAP, &supported);
return (1 << FIELD_GET(PCI_PASID_CAP_WIDTH, supported));
}
EXPORT_SYMBOL_GPL(pci_max_pasids);
#endif /* CONFIG_PCI_PASID */
Reference in New Issue View Git Blame Copy Permalink