Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 01:51:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
67df6cc665
linux/Documentation/power/video.txt
Justin P. Mattock 0ea6e61122 Documentation: update broken web addresses. 
Below you will find an updated version from the original series bunching all patches into one big patch
updating broken web addresses that are located in Documentation/*
Some of the addresses date as far far back as 1995 etc... so searching became a bit difficult,
the best way to deal with these is to use web.archive.org to locate these addresses that are outdated.
Now there are also some addresses pointing to .spec files some are located, but some(after searching
on the companies site)where still no where to be found. In this case I just changed the address
to the company site this way the users can contact the company and they can locate them for the users.

Signed-off-by: Justin P. Mattock <justinmattock@gmail.com>
Signed-off-by: Thomas Weber <weber@corscience.de>
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com>
Cc: Paulo Marques <pmarques@grupopie.com>
Cc: Randy Dunlap <rdunlap@xenotime.net>
Cc: Michael Neuling <mikey@neuling.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2010-08-04 15:21:40 +02:00

186 lines
8.3 KiB
Plaintext
Raw Blame History

Video issues with S3 resume
~~~~~~~~~~~~~~~~~~~~~~~~~~~
2003-2006, Pavel Machek
During S3 resume, hardware needs to be reinitialized. For most
devices, this is easy, and kernel driver knows how to do
it. Unfortunately there's one exception: video card. Those are usually
initialized by BIOS, and kernel does not have enough information to
boot video card. (Kernel usually does not even contain video card
driver -- vesafb and vgacon are widely used).
This is not problem for swsusp, because during swsusp resume, BIOS is
run normally so video card is normally initialized. It should not be
problem for S1 standby, because hardware should retain its state over
that.
We either have to run video BIOS during early resume, or interpret it
using vbetool later, or maybe nothing is necessary on particular
system because video state is preserved. Unfortunately different
methods work on different systems, and no known method suits all of
them.
Userland application called s2ram has been developed; it contains long
whitelist of systems, and automatically selects working method for a
given system. It can be downloaded from CVS at
www.sf.net/projects/suspend . If you get a system that is not in the
whitelist, please try to find a working solution, and submit whitelist
entry so that work does not need to be repeated.
Currently, VBE_SAVE method (6 below) works on most
systems. Unfortunately, vbetool only runs after userland is resumed,
so it makes debugging of early resume problems
hard/impossible. Methods that do not rely on userland are preferable.
Details
~~~~~~~
There are a few types of systems where video works after S3 resume:
(1) systems where video state is preserved over S3.
(2) systems where it is possible to call the video BIOS during S3
resume. Unfortunately, it is not correct to call the video BIOS at
that point, but it happens to work on some machines. Use
acpi_sleep=s3_bios.
(3) systems that initialize video card into vga text mode and where
the BIOS works well enough to be able to set video mode. Use
acpi_sleep=s3_mode on these.
(4) on some systems s3_bios kicks video into text mode, and
acpi_sleep=s3_bios,s3_mode is needed.
(5) radeon systems, where X can soft-boot your video card. You'll need
a new enough X, and a plain text console (no vesafb or radeonfb). See
http://www.doesi.gmxhome.de/linux/tm800s3/s3.html for more information.
Alternatively, you should use vbetool (6) instead.
(6) other radeon systems, where vbetool is enough to bring system back
to life. It needs text console to be working. Do vbetool vbestate
save > /tmp/delme; echo 3 > /proc/acpi/sleep; vbetool post; vbetool
vbestate restore < /tmp/delme; setfont <whatever>, and your video
should work.
(7) on some systems, it is possible to boot most of kernel, and then
POSTing bios works. Ole Rohne has patch to do just that at
http://dev.gentoo.org/~marineam/patch-radeonfb-2.6.11-rc2-mm2.
(8) on some systems, you can use the video_post utility and or
do echo 3 > /sys/power/state && /usr/sbin/video_post - which will
initialize the display in console mode. If you are in X, you can switch
to a virtual terminal and back to X using CTRL+ALT+F1 - CTRL+ALT+F7 to get
the display working in graphical mode again.
Now, if you pass acpi_sleep=something, and it does not work with your
bios, you'll get a hard crash during resume. Be careful. Also it is
safest to do your experiments with plain old VGA console. The vesafb
and radeonfb (etc) drivers have a tendency to crash the machine during
resume.
You may have a system where none of above works. At that point you
either invent another ugly hack that works, or write proper driver for
your video card (good luck getting docs :-(). Maybe suspending from X
(proper X, knowing your hardware, not XF68_FBcon) might have better
chance of working.
Table of known working notebooks:
Model hack (or "how to do it")
------------------------------------------------------------------------------
Acer Aspire 1406LC ole's late BIOS init (7), turn off DRI
Acer TM 230 s3_bios (2)
Acer TM 242FX vbetool (6)
Acer TM C110 video_post (8)
Acer TM C300 vga=normal (only suspend on console, not in X), vbetool (6) or video_post (8)
Acer TM 4052LCi s3_bios (2)
Acer TM 636Lci s3_bios,s3_mode (4)
Acer TM 650 (Radeon M7) vga=normal plus boot-radeon (5) gets text console back
Acer TM 660 ??? (*)
Acer TM 800 vga=normal, X patches, see webpage (5) or vbetool (6)
Acer TM 803 vga=normal, X patches, see webpage (5) or vbetool (6)
Acer TM 803LCi vga=normal, vbetool (6)
Arima W730a vbetool needed (6)
Asus L2400D s3_mode (3)(***) (S1 also works OK)
Asus L3350M (SiS 740) (6)
Asus L3800C (Radeon M7) s3_bios (2) (S1 also works OK)
Asus M6887Ne vga=normal, s3_bios (2), use radeon driver instead of fglrx in x.org
Athlon64 desktop prototype s3_bios (2)
Compal CL-50 ??? (*)
Compaq Armada E500 - P3-700 none (1) (S1 also works OK)
Compaq Evo N620c vga=normal, s3_bios (2)
Dell 600m, ATI R250 Lf none (1), but needs xorg-x11-6.8.1.902-1
Dell D600, ATI RV250 vga=normal and X, or try vbestate (6)
Dell D610 vga=normal and X (possibly vbestate (6) too, but not tested)
Dell Inspiron 4000 ??? (*)
Dell Inspiron 500m ??? (*)
Dell Inspiron 510m ???
Dell Inspiron 5150 vbetool needed (6)
Dell Inspiron 600m ??? (*)
Dell Inspiron 8200 ??? (*)
Dell Inspiron 8500 ??? (*)
Dell Inspiron 8600 ??? (*)
eMachines athlon64 machines vbetool needed (6) (someone please get me model #s)
HP NC6000 s3_bios, may not use radeonfb (2); or vbetool (6)
HP NX7000 ??? (*)
HP Pavilion ZD7000 vbetool post needed, need open-source nv driver for X
HP Omnibook XE3 athlon version none (1)
HP Omnibook XE3GC none (1), video is S3 Savage/IX-MV
HP Omnibook XE3L-GF vbetool (6)
HP Omnibook 5150 none (1), (S1 also works OK)
IBM TP T20, model 2647-44G none (1), video is S3 Inc. 86C270-294 Savage/IX-MV, vesafb gets "interesting" but X work.
IBM TP A31 / Type 2652-M5G s3_mode (3) [works ok with BIOS 1.04 2002-08-23, but not at all with BIOS 1.11 2004-11-05 :-(]
IBM TP R32 / Type 2658-MMG none (1)
IBM TP R40 2722B3G ??? (*)
IBM TP R50p / Type 1832-22U s3_bios (2)
IBM TP R51 none (1)
IBM TP T30 236681A ??? (*)
IBM TP T40 / Type 2373-MU4 none (1)
IBM TP T40p none (1)
IBM TP R40p s3_bios (2)
IBM TP T41p s3_bios (2), switch to X after resume
IBM TP T42 s3_bios (2)
IBM ThinkPad T42p (2373-GTG) s3_bios (2)
IBM TP X20 ??? (*)
IBM TP X30 s3_bios, s3_mode (4)
IBM TP X31 / Type 2672-XXH none (1), use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
IBM TP X32 none (1), but backlight is on and video is trashed after long suspend. s3_bios,s3_mode (4) works too. Perhaps that gets better results?
IBM Thinkpad X40 Type 2371-7JG s3_bios,s3_mode (4)
IBM TP 600e none(1), but a switch to console and back to X is needed
Medion MD4220 ??? (*)
Samsung P35 vbetool needed (6)
Sharp PC-AR10 (ATI rage) none (1), backlight does not switch off
Sony Vaio PCG-C1VRX/K s3_bios (2)
Sony Vaio PCG-F403 ??? (*)
Sony Vaio PCG-GRT995MP none (1), works with 'nv' X driver
Sony Vaio PCG-GR7/K none (1), but needs radeonfb, use radeontool (http://fdd.com/software/radeon/) to turn off backlight.
Sony Vaio PCG-N505SN ??? (*)
Sony Vaio vgn-s260 X or boot-radeon can init it (5)
Sony Vaio vgn-S580BH vga=normal, but suspend from X. Console will be blank unless you return to X.
Sony Vaio vgn-FS115B s3_bios (2),s3_mode (4)
Toshiba Libretto L5 none (1)
Toshiba Libretto 100CT/110CT vbetool (6)
Toshiba Portege 3020CT s3_mode (3)
Toshiba Satellite 4030CDT s3_mode (3) (S1 also works OK)
Toshiba Satellite 4080XCDT s3_mode (3) (S1 also works OK)
Toshiba Satellite 4090XCDT ??? (*)
Toshiba Satellite P10-554 s3_bios,s3_mode (4)(****)
Toshiba M30 (2) xor X with nvidia driver using internal AGP
Uniwill 244IIO ??? (*)
Known working desktop systems
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Mainboard Graphics card hack (or "how to do it")
------------------------------------------------------------------------------
Asus A7V8X nVidia RIVA TNT2 model 64 s3_bios,s3_mode (4)
(*) from https://wiki.ubuntu.com/HoaryPMResults, not sure
which options to use. If you know, please tell me.
(***) To be tested with a newer kernel.
(****) Not with SMP kernel, UP only.
Reference in New Issue View Git Blame Copy Permalink