mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 10:01:43 +00:00
b9cdad7488
This is a new I2C bus driver for the TAOS evaluation modules. Developped and tested on the TAOS TSL2550 EVM. Signed-off-by: Jean Delvare <khali@linux-fr.org>
47 lines
1.4 KiB
Plaintext
47 lines
1.4 KiB
Plaintext
Kernel driver i2c-taos-evm
|
|
|
|
Author: Jean Delvare <khali@linux-fr.org>
|
|
|
|
This is a driver for the evaluation modules for TAOS I2C/SMBus chips.
|
|
The modules include an SMBus master with limited capabilities, which can
|
|
be controlled over the serial port. Virtually all evaluation modules
|
|
are supported, but a few lines of code need to be added for each new
|
|
module to instantiate the right I2C chip on the bus. Obviously, a driver
|
|
for the chip in question is also needed.
|
|
|
|
Currently supported devices are:
|
|
|
|
* TAOS TSL2550 EVM
|
|
|
|
For addtional information on TAOS products, please see
|
|
http://www.taosinc.com/
|
|
|
|
|
|
Using this driver
|
|
-----------------
|
|
|
|
In order to use this driver, you'll need the serport driver, and the
|
|
inputattach tool, which is part of the input-utils package. The following
|
|
commands will tell the kernel that you have a TAOS EVM on the first
|
|
serial port:
|
|
|
|
# modprobe serport
|
|
# inputattach --taos-evm /dev/ttyS0
|
|
|
|
|
|
Technical details
|
|
-----------------
|
|
|
|
Only 4 SMBus transaction types are supported by the TAOS evaluation
|
|
modules:
|
|
* Receive Byte
|
|
* Send Byte
|
|
* Read Byte
|
|
* Write Byte
|
|
|
|
The communication protocol is text-based and pretty simple. It is
|
|
described in a PDF document on the CD which comes with the evaluation
|
|
module. The communication is rather slow, because the serial port has
|
|
to operate at 1200 bps. However, I don't think this is a big concern in
|
|
practice, as these modules are meant for evaluation and testing only.
|