linux/arch/arm/mach-clps711x/common.c
Alexander Shiyan 7dfbf1b68e ARM: clps711x: Optimize interrupt handling
This patch modify interrupt handler for processing all penging interrupts
at once.

Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-11 15:47:38 -07:00

403 lines
9.2 KiB
C

/*
* linux/arch/arm/mach-clps711x/core.c
*
* Core support for the CLPS711x-based machines.
*
* Copyright (C) 2001,2011 Deep Blue Solutions Ltd
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/io.h>
#include <linux/init.h>
#include <linux/sizes.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/clk.h>
#include <linux/clkdev.h>
#include <linux/clockchips.h>
#include <linux/clocksource.h>
#include <linux/clk-provider.h>
#include <asm/exception.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/sched_clock.h>
#include <asm/system_misc.h>
#include <mach/hardware.h>
static struct clk *clk_pll, *clk_bus, *clk_uart, *clk_timerl, *clk_timerh,
*clk_tint, *clk_spi;
/*
* This maps the generic CLPS711x registers
*/
static struct map_desc clps711x_io_desc[] __initdata = {
{
.virtual = (unsigned long)CLPS711X_VIRT_BASE,
.pfn = __phys_to_pfn(CLPS711X_PHYS_BASE),
.length = SZ_64K,
.type = MT_DEVICE
}
};
void __init clps711x_map_io(void)
{
iotable_init(clps711x_io_desc, ARRAY_SIZE(clps711x_io_desc));
}
static void int1_mask(struct irq_data *d)
{
u32 intmr1;
intmr1 = clps_readl(INTMR1);
intmr1 &= ~(1 << d->irq);
clps_writel(intmr1, INTMR1);
}
static void int1_eoi(struct irq_data *d)
{
switch (d->irq) {
case IRQ_CSINT: clps_writel(0, COEOI); break;
case IRQ_TC1OI: clps_writel(0, TC1EOI); break;
case IRQ_TC2OI: clps_writel(0, TC2EOI); break;
case IRQ_RTCMI: clps_writel(0, RTCEOI); break;
case IRQ_TINT: clps_writel(0, TEOI); break;
case IRQ_UMSINT: clps_writel(0, UMSEOI); break;
}
}
static void int1_unmask(struct irq_data *d)
{
u32 intmr1;
intmr1 = clps_readl(INTMR1);
intmr1 |= 1 << d->irq;
clps_writel(intmr1, INTMR1);
}
static struct irq_chip int1_chip = {
.name = "Interrupt Vector 1",
.irq_eoi = int1_eoi,
.irq_mask = int1_mask,
.irq_unmask = int1_unmask,
};
static void int2_mask(struct irq_data *d)
{
u32 intmr2;
intmr2 = clps_readl(INTMR2);
intmr2 &= ~(1 << (d->irq - 16));
clps_writel(intmr2, INTMR2);
}
static void int2_eoi(struct irq_data *d)
{
switch (d->irq) {
case IRQ_KBDINT: clps_writel(0, KBDEOI); break;
}
}
static void int2_unmask(struct irq_data *d)
{
u32 intmr2;
intmr2 = clps_readl(INTMR2);
intmr2 |= 1 << (d->irq - 16);
clps_writel(intmr2, INTMR2);
}
static struct irq_chip int2_chip = {
.name = "Interrupt Vector 2",
.irq_eoi = int2_eoi,
.irq_mask = int2_mask,
.irq_unmask = int2_unmask,
};
static void int3_mask(struct irq_data *d)
{
u32 intmr3;
intmr3 = clps_readl(INTMR3);
intmr3 &= ~(1 << (d->irq - 32));
clps_writel(intmr3, INTMR3);
}
static void int3_unmask(struct irq_data *d)
{
u32 intmr3;
intmr3 = clps_readl(INTMR3);
intmr3 |= 1 << (d->irq - 32);
clps_writel(intmr3, INTMR3);
}
static struct irq_chip int3_chip = {
.name = "Interrupt Vector 3",
.irq_mask = int3_mask,
.irq_unmask = int3_unmask,
};
static struct {
int nr;
struct irq_chip *chip;
irq_flow_handler_t handle;
} clps711x_irqdescs[] __initdata = {
{ IRQ_CSINT, &int1_chip, handle_fasteoi_irq, },
{ IRQ_EINT1, &int1_chip, handle_level_irq, },
{ IRQ_EINT2, &int1_chip, handle_level_irq, },
{ IRQ_EINT3, &int1_chip, handle_level_irq, },
{ IRQ_TC1OI, &int1_chip, handle_fasteoi_irq, },
{ IRQ_TC2OI, &int1_chip, handle_fasteoi_irq, },
{ IRQ_RTCMI, &int1_chip, handle_fasteoi_irq, },
{ IRQ_TINT, &int1_chip, handle_fasteoi_irq, },
{ IRQ_UTXINT1, &int1_chip, handle_level_irq, },
{ IRQ_URXINT1, &int1_chip, handle_level_irq, },
{ IRQ_UMSINT, &int1_chip, handle_fasteoi_irq, },
{ IRQ_SSEOTI, &int1_chip, handle_level_irq, },
{ IRQ_KBDINT, &int2_chip, handle_fasteoi_irq, },
{ IRQ_SS2RX, &int2_chip, handle_level_irq, },
{ IRQ_SS2TX, &int2_chip, handle_level_irq, },
{ IRQ_UTXINT2, &int2_chip, handle_level_irq, },
{ IRQ_URXINT2, &int2_chip, handle_level_irq, },
};
void __init clps711x_init_irq(void)
{
unsigned int i;
/* Disable interrupts */
clps_writel(0, INTMR1);
clps_writel(0, INTMR2);
clps_writel(0, INTMR3);
/* Clear down any pending interrupts */
clps_writel(0, BLEOI);
clps_writel(0, MCEOI);
clps_writel(0, COEOI);
clps_writel(0, TC1EOI);
clps_writel(0, TC2EOI);
clps_writel(0, RTCEOI);
clps_writel(0, TEOI);
clps_writel(0, UMSEOI);
clps_writel(0, KBDEOI);
clps_writel(0, SRXEOF);
clps_writel(0xffffffff, DAISR);
for (i = 0; i < ARRAY_SIZE(clps711x_irqdescs); i++) {
irq_set_chip_and_handler(clps711x_irqdescs[i].nr,
clps711x_irqdescs[i].chip,
clps711x_irqdescs[i].handle);
set_irq_flags(clps711x_irqdescs[i].nr,
IRQF_VALID | IRQF_PROBE);
}
if (IS_ENABLED(CONFIG_FIQ)) {
init_FIQ(0);
irq_set_chip_and_handler(IRQ_DAIINT, &int3_chip,
handle_bad_irq);
set_irq_flags(IRQ_DAIINT,
IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
}
}
static inline u32 fls16(u32 x)
{
u32 r = 15;
if (!(x & 0xff00)) {
x <<= 8;
r -= 8;
}
if (!(x & 0xf000)) {
x <<= 4;
r -= 4;
}
if (!(x & 0xc000)) {
x <<= 2;
r -= 2;
}
if (!(x & 0x8000))
r--;
return r;
}
asmlinkage void __exception_irq_entry clps711x_handle_irq(struct pt_regs *regs)
{
do {
u32 irqstat;
void __iomem *base = CLPS711X_VIRT_BASE;
irqstat = readw_relaxed(base + INTSR1) &
readw_relaxed(base + INTMR1);
if (irqstat)
handle_IRQ(fls16(irqstat), regs);
irqstat = readw_relaxed(base + INTSR2) &
readw_relaxed(base + INTMR2);
if (irqstat) {
handle_IRQ(fls16(irqstat) + 16, regs);
continue;
}
break;
} while (1);
}
static u32 notrace clps711x_sched_clock_read(void)
{
return ~readw_relaxed(CLPS711X_VIRT_BASE + TC1D);
}
static void clps711x_clockevent_set_mode(enum clock_event_mode mode,
struct clock_event_device *evt)
{
disable_irq(IRQ_TC2OI);
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
enable_irq(IRQ_TC2OI);
break;
case CLOCK_EVT_MODE_ONESHOT:
/* Not supported */
case CLOCK_EVT_MODE_SHUTDOWN:
case CLOCK_EVT_MODE_UNUSED:
case CLOCK_EVT_MODE_RESUME:
/* Left event sources disabled, no more interrupts appear */
break;
}
}
static struct clock_event_device clockevent_clps711x = {
.name = "clps711x-clockevent",
.rating = 300,
.features = CLOCK_EVT_FEAT_PERIODIC,
.set_mode = clps711x_clockevent_set_mode,
};
static irqreturn_t clps711x_timer_interrupt(int irq, void *dev_id)
{
clockevent_clps711x.event_handler(&clockevent_clps711x);
return IRQ_HANDLED;
}
static struct irqaction clps711x_timer_irq = {
.name = "clps711x-timer",
.flags = IRQF_TIMER | IRQF_IRQPOLL,
.handler = clps711x_timer_interrupt,
};
static void add_fixed_clk(struct clk *clk, const char *name, int rate)
{
clk = clk_register_fixed_rate(NULL, name, NULL, CLK_IS_ROOT, rate);
clk_register_clkdev(clk, name, NULL);
}
void __init clps711x_timer_init(void)
{
int osc, ext, pll, cpu, bus, timl, timh, uart, spi;
u32 tmp;
osc = 3686400;
ext = 13000000;
tmp = clps_readl(PLLR) >> 24;
if (tmp)
pll = (osc * tmp) / 2;
else
pll = 73728000; /* Default value */
tmp = clps_readl(SYSFLG2);
if (tmp & SYSFLG2_CKMODE) {
cpu = ext;
bus = cpu;
spi = 135400;
pll = 0;
} else {
cpu = pll;
if (cpu >= 36864000)
bus = cpu / 2;
else
bus = 36864000 / 2;
spi = cpu / 576;
}
uart = bus / 10;
if (tmp & SYSFLG2_CKMODE) {
tmp = clps_readl(SYSCON2);
if (tmp & SYSCON2_OSTB)
timh = ext / 26;
else
timh = 541440;
} else
timh = DIV_ROUND_CLOSEST(cpu, 144);
timl = DIV_ROUND_CLOSEST(timh, 256);
/* All clocks are fixed */
add_fixed_clk(clk_pll, "pll", pll);
add_fixed_clk(clk_bus, "bus", bus);
add_fixed_clk(clk_uart, "uart", uart);
add_fixed_clk(clk_timerl, "timer_lf", timl);
add_fixed_clk(clk_timerh, "timer_hf", timh);
add_fixed_clk(clk_tint, "tint", 64);
add_fixed_clk(clk_spi, "spi", spi);
pr_info("CPU frequency set at %i Hz.\n", cpu);
/* Start Timer1 in free running mode (Low frequency) */
tmp = clps_readl(SYSCON1) & ~(SYSCON1_TC1S | SYSCON1_TC1M);
clps_writel(tmp, SYSCON1);
setup_sched_clock(clps711x_sched_clock_read, 16, timl);
clocksource_mmio_init(CLPS711X_VIRT_BASE + TC1D,
"clps711x_clocksource", timl, 300, 16,
clocksource_mmio_readw_down);
/* Set Timer2 prescaler */
clps_writew(DIV_ROUND_CLOSEST(timh, HZ), TC2D);
/* Start Timer2 in prescale mode (High frequency)*/
tmp = clps_readl(SYSCON1) | SYSCON1_TC2M | SYSCON1_TC2S;
clps_writel(tmp, SYSCON1);
clockevents_config_and_register(&clockevent_clps711x, timh, 0, 0);
setup_irq(IRQ_TC2OI, &clps711x_timer_irq);
}
void clps711x_restart(char mode, const char *cmd)
{
soft_restart(0);
}
static void clps711x_idle(void)
{
clps_writel(1, HALT);
asm("mov r0, r0");
asm("mov r0, r0");
}
void __init clps711x_init_early(void)
{
arm_pm_idle = clps711x_idle;
}