linux/arch/powerpc/mm/hugetlbpage-hash64.c
Benjamin Herrenschmidt 4b8692c022 powerpc/mm: Add some debug output when hash insertion fails
This adds some debug output to our MMU hash code to print out some
useful debug data if the hypervisor refuses the insertion (which
should normally never happen).

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
---
2010-07-23 12:56:56 +10:00

144 lines
4.1 KiB
C

/*
* PPC64 Huge TLB Page Support for hash based MMUs (POWER4 and later)
*
* Copyright (C) 2003 David Gibson, IBM Corporation.
*
* Based on the IA-32 version:
* Copyright (C) 2002, Rohit Seth <rohit.seth@intel.com>
*/
#include <linux/mm.h>
#include <linux/hugetlb.h>
#include <asm/pgtable.h>
#include <asm/pgalloc.h>
#include <asm/cacheflush.h>
#include <asm/machdep.h>
int __hash_page_huge(unsigned long ea, unsigned long access, unsigned long vsid,
pte_t *ptep, unsigned long trap, int local, int ssize,
unsigned int shift, unsigned int mmu_psize)
{
unsigned long old_pte, new_pte;
unsigned long va, rflags, pa, sz;
long slot;
BUG_ON(shift != mmu_psize_defs[mmu_psize].shift);
/* Search the Linux page table for a match with va */
va = hpt_va(ea, vsid, ssize);
/* At this point, we have a pte (old_pte) which can be used to build
* or update an HPTE. There are 2 cases:
*
* 1. There is a valid (present) pte with no associated HPTE (this is
* the most common case)
* 2. There is a valid (present) pte with an associated HPTE. The
* current values of the pp bits in the HPTE prevent access
* because we are doing software DIRTY bit management and the
* page is currently not DIRTY.
*/
do {
old_pte = pte_val(*ptep);
/* If PTE busy, retry the access */
if (unlikely(old_pte & _PAGE_BUSY))
return 0;
/* If PTE permissions don't match, take page fault */
if (unlikely(access & ~old_pte))
return 1;
/* Try to lock the PTE, add ACCESSED and DIRTY if it was
* a write access */
new_pte = old_pte | _PAGE_BUSY | _PAGE_ACCESSED;
if (access & _PAGE_RW)
new_pte |= _PAGE_DIRTY;
} while(old_pte != __cmpxchg_u64((unsigned long *)ptep,
old_pte, new_pte));
rflags = 0x2 | (!(new_pte & _PAGE_RW));
/* _PAGE_EXEC -> HW_NO_EXEC since it's inverted */
rflags |= ((new_pte & _PAGE_EXEC) ? 0 : HPTE_R_N);
sz = ((1UL) << shift);
if (!cpu_has_feature(CPU_FTR_COHERENT_ICACHE))
/* No CPU has hugepages but lacks no execute, so we
* don't need to worry about that case */
rflags = hash_page_do_lazy_icache(rflags, __pte(old_pte), trap);
/* Check if pte already has an hpte (case 2) */
if (unlikely(old_pte & _PAGE_HASHPTE)) {
/* There MIGHT be an HPTE for this pte */
unsigned long hash, slot;
hash = hpt_hash(va, shift, ssize);
if (old_pte & _PAGE_F_SECOND)
hash = ~hash;
slot = (hash & htab_hash_mask) * HPTES_PER_GROUP;
slot += (old_pte & _PAGE_F_GIX) >> 12;
if (ppc_md.hpte_updatepp(slot, rflags, va, mmu_psize,
ssize, local) == -1)
old_pte &= ~_PAGE_HPTEFLAGS;
}
if (likely(!(old_pte & _PAGE_HASHPTE))) {
unsigned long hash = hpt_hash(va, shift, ssize);
unsigned long hpte_group;
pa = pte_pfn(__pte(old_pte)) << PAGE_SHIFT;
repeat:
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
/* clear HPTE slot informations in new PTE */
#ifdef CONFIG_PPC_64K_PAGES
new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HPTE_SUB0;
#else
new_pte = (new_pte & ~_PAGE_HPTEFLAGS) | _PAGE_HASHPTE;
#endif
/* Add in WIMG bits */
rflags |= (new_pte & (_PAGE_WRITETHRU | _PAGE_NO_CACHE |
_PAGE_COHERENT | _PAGE_GUARDED));
/* Insert into the hash table, primary slot */
slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags, 0,
mmu_psize, ssize);
/* Primary is full, try the secondary */
if (unlikely(slot == -1)) {
hpte_group = ((~hash & htab_hash_mask) *
HPTES_PER_GROUP) & ~0x7UL;
slot = ppc_md.hpte_insert(hpte_group, va, pa, rflags,
HPTE_V_SECONDARY,
mmu_psize, ssize);
if (slot == -1) {
if (mftb() & 0x1)
hpte_group = ((hash & htab_hash_mask) *
HPTES_PER_GROUP)&~0x7UL;
ppc_md.hpte_remove(hpte_group);
goto repeat;
}
}
/*
* Hypervisor failure. Restore old pte and return -1
* similar to __hash_page_*
*/
if (unlikely(slot == -2)) {
*ptep = __pte(old_pte);
hash_failure_debug(ea, access, vsid, trap, ssize,
mmu_psize, old_pte);
return -1;
}
new_pte |= (slot << 12) & (_PAGE_F_SECOND | _PAGE_F_GIX);
}
/*
* No need to use ldarx/stdcx here
*/
*ptep = __pte(new_pte & ~_PAGE_BUSY);
return 0;
}