mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
21ba0f88ae
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (34 commits) PCI: Only build PCI syscalls on architectures that want them PCI: limit pci_get_bus_and_slot to domain 0 PCI: hotplug: acpiphp: avoid acpiphp "cannot get bridge info" PCI hotplug failure PCI: hotplug: acpiphp: remove hot plug parameter write to PCI host bridge PCI: hotplug: acpiphp: fix slot poweroff problem on systems without _PS3 PCI: hotplug: pciehp: wait for 1 second after power off slot PCI: pci_set_power_state(): check for PM capabilities earlier PCI: cpci_hotplug: Convert to use the kthread API PCI: add pci_try_set_mwi PCI: pcie: remove SPIN_LOCK_UNLOCKED PCI: ROUND_UP macro cleanup in drivers/pci PCI: remove pci_dac_dma_... APIs PCI: pci-x-pci-express-read-control-interfaces cleanups PCI: Fix typo in include/linux/pci.h PCI: pci_ids, remove double or more empty lines PCI: pci_ids, add atheros and 3com_2 vendors PCI: pci_ids, reorder some entries PCI: i386: traps, change VENDOR to DEVICE PCI: ATM: lanai, change VENDOR to DEVICE PCI: Change all drivers to use pci_device->revision ...
2650 lines
74 KiB
C
2650 lines
74 KiB
C
/* typhoon.c: A Linux Ethernet device driver for 3Com 3CR990 family of NICs */
|
|
/*
|
|
Written 2002-2004 by David Dillow <dave@thedillows.org>
|
|
Based on code written 1998-2000 by Donald Becker <becker@scyld.com> and
|
|
Linux 2.2.x driver by David P. McLean <davidpmclean@yahoo.com>.
|
|
|
|
This software may be used and distributed according to the terms of
|
|
the GNU General Public License (GPL), incorporated herein by reference.
|
|
Drivers based on or derived from this code fall under the GPL and must
|
|
retain the authorship, copyright and license notice. This file is not
|
|
a complete program and may only be used when the entire operating
|
|
system is licensed under the GPL.
|
|
|
|
This software is available on a public web site. It may enable
|
|
cryptographic capabilities of the 3Com hardware, and may be
|
|
exported from the United States under License Exception "TSU"
|
|
pursuant to 15 C.F.R. Section 740.13(e).
|
|
|
|
This work was funded by the National Library of Medicine under
|
|
the Department of Energy project number 0274DD06D1 and NLM project
|
|
number Y1-LM-2015-01.
|
|
|
|
This driver is designed for the 3Com 3CR990 Family of cards with the
|
|
3XP Processor. It has been tested on x86 and sparc64.
|
|
|
|
KNOWN ISSUES:
|
|
*) The current firmware always strips the VLAN tag off, even if
|
|
we tell it not to. You should filter VLANs at the switch
|
|
as a workaround (good practice in any event) until we can
|
|
get this fixed.
|
|
*) Cannot DMA Rx packets to a 2 byte aligned address. Also firmware
|
|
issue. Hopefully 3Com will fix it.
|
|
*) Waiting for a command response takes 8ms due to non-preemptable
|
|
polling. Only significant for getting stats and creating
|
|
SAs, but an ugly wart never the less.
|
|
|
|
TODO:
|
|
*) Doesn't do IPSEC offloading. Yet. Keep yer pants on, it's coming.
|
|
*) Add more support for ethtool (especially for NIC stats)
|
|
*) Allow disabling of RX checksum offloading
|
|
*) Fix MAC changing to work while the interface is up
|
|
(Need to put commands on the TX ring, which changes
|
|
the locking)
|
|
*) Add in FCS to {rx,tx}_bytes, since the hardware doesn't. See
|
|
http://oss.sgi.com/cgi-bin/mesg.cgi?a=netdev&i=20031215152211.7003fe8e.rddunlap%40osdl.org
|
|
*/
|
|
|
|
/* Set the copy breakpoint for the copy-only-tiny-frames scheme.
|
|
* Setting to > 1518 effectively disables this feature.
|
|
*/
|
|
static int rx_copybreak = 200;
|
|
|
|
/* Should we use MMIO or Port IO?
|
|
* 0: Port IO
|
|
* 1: MMIO
|
|
* 2: Try MMIO, fallback to Port IO
|
|
*/
|
|
static unsigned int use_mmio = 2;
|
|
|
|
/* end user-configurable values */
|
|
|
|
/* Maximum number of multicast addresses to filter (vs. rx-all-multicast).
|
|
*/
|
|
static const int multicast_filter_limit = 32;
|
|
|
|
/* Operational parameters that are set at compile time. */
|
|
|
|
/* Keep the ring sizes a power of two for compile efficiency.
|
|
* The compiler will convert <unsigned>'%'<2^N> into a bit mask.
|
|
* Making the Tx ring too large decreases the effectiveness of channel
|
|
* bonding and packet priority.
|
|
* There are no ill effects from too-large receive rings.
|
|
*
|
|
* We don't currently use the Hi Tx ring so, don't make it very big.
|
|
*
|
|
* Beware that if we start using the Hi Tx ring, we will need to change
|
|
* typhoon_num_free_tx() and typhoon_tx_complete() to account for that.
|
|
*/
|
|
#define TXHI_ENTRIES 2
|
|
#define TXLO_ENTRIES 128
|
|
#define RX_ENTRIES 32
|
|
#define COMMAND_ENTRIES 16
|
|
#define RESPONSE_ENTRIES 32
|
|
|
|
#define COMMAND_RING_SIZE (COMMAND_ENTRIES * sizeof(struct cmd_desc))
|
|
#define RESPONSE_RING_SIZE (RESPONSE_ENTRIES * sizeof(struct resp_desc))
|
|
|
|
/* The 3XP will preload and remove 64 entries from the free buffer
|
|
* list, and we need one entry to keep the ring from wrapping, so
|
|
* to keep this a power of two, we use 128 entries.
|
|
*/
|
|
#define RXFREE_ENTRIES 128
|
|
#define RXENT_ENTRIES (RXFREE_ENTRIES - 1)
|
|
|
|
/* Operational parameters that usually are not changed. */
|
|
|
|
/* Time in jiffies before concluding the transmitter is hung. */
|
|
#define TX_TIMEOUT (2*HZ)
|
|
|
|
#define PKT_BUF_SZ 1536
|
|
|
|
#define DRV_MODULE_NAME "typhoon"
|
|
#define DRV_MODULE_VERSION "1.5.8"
|
|
#define DRV_MODULE_RELDATE "06/11/09"
|
|
#define PFX DRV_MODULE_NAME ": "
|
|
#define ERR_PFX KERN_ERR PFX
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/mm.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/bitops.h>
|
|
#include <asm/processor.h>
|
|
#include <asm/io.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/in6.h>
|
|
#include <linux/version.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include "typhoon.h"
|
|
#include "typhoon-firmware.h"
|
|
|
|
static const char version[] __devinitdata =
|
|
"typhoon.c: version " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
|
|
|
|
MODULE_AUTHOR("David Dillow <dave@thedillows.org>");
|
|
MODULE_VERSION(DRV_MODULE_VERSION);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("3Com Typhoon Family (3C990, 3CR990, and variants)");
|
|
MODULE_PARM_DESC(rx_copybreak, "Packets smaller than this are copied and "
|
|
"the buffer given back to the NIC. Default "
|
|
"is 200.");
|
|
MODULE_PARM_DESC(use_mmio, "Use MMIO (1) or PIO(0) to access the NIC. "
|
|
"Default is to try MMIO and fallback to PIO.");
|
|
module_param(rx_copybreak, int, 0);
|
|
module_param(use_mmio, int, 0);
|
|
|
|
#if defined(NETIF_F_TSO) && MAX_SKB_FRAGS > 32
|
|
#warning Typhoon only supports 32 entries in its SG list for TSO, disabling TSO
|
|
#undef NETIF_F_TSO
|
|
#endif
|
|
|
|
#if TXLO_ENTRIES <= (2 * MAX_SKB_FRAGS)
|
|
#error TX ring too small!
|
|
#endif
|
|
|
|
struct typhoon_card_info {
|
|
char *name;
|
|
int capabilities;
|
|
};
|
|
|
|
#define TYPHOON_CRYPTO_NONE 0x00
|
|
#define TYPHOON_CRYPTO_DES 0x01
|
|
#define TYPHOON_CRYPTO_3DES 0x02
|
|
#define TYPHOON_CRYPTO_VARIABLE 0x04
|
|
#define TYPHOON_FIBER 0x08
|
|
#define TYPHOON_WAKEUP_NEEDS_RESET 0x10
|
|
|
|
enum typhoon_cards {
|
|
TYPHOON_TX = 0, TYPHOON_TX95, TYPHOON_TX97, TYPHOON_SVR,
|
|
TYPHOON_SVR95, TYPHOON_SVR97, TYPHOON_TXM, TYPHOON_BSVR,
|
|
TYPHOON_FX95, TYPHOON_FX97, TYPHOON_FX95SVR, TYPHOON_FX97SVR,
|
|
TYPHOON_FXM,
|
|
};
|
|
|
|
/* directly indexed by enum typhoon_cards, above */
|
|
static const struct typhoon_card_info typhoon_card_info[] __devinitdata = {
|
|
{ "3Com Typhoon (3C990-TX)",
|
|
TYPHOON_CRYPTO_NONE},
|
|
{ "3Com Typhoon (3CR990-TX-95)",
|
|
TYPHOON_CRYPTO_DES},
|
|
{ "3Com Typhoon (3CR990-TX-97)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
|
|
{ "3Com Typhoon (3C990SVR)",
|
|
TYPHOON_CRYPTO_NONE},
|
|
{ "3Com Typhoon (3CR990SVR95)",
|
|
TYPHOON_CRYPTO_DES},
|
|
{ "3Com Typhoon (3CR990SVR97)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES},
|
|
{ "3Com Typhoon2 (3C990B-TX-M)",
|
|
TYPHOON_CRYPTO_VARIABLE},
|
|
{ "3Com Typhoon2 (3C990BSVR)",
|
|
TYPHOON_CRYPTO_VARIABLE},
|
|
{ "3Com Typhoon (3CR990-FX-95)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
|
|
{ "3Com Typhoon (3CR990-FX-97)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
|
|
{ "3Com Typhoon (3CR990-FX-95 Server)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_FIBER},
|
|
{ "3Com Typhoon (3CR990-FX-97 Server)",
|
|
TYPHOON_CRYPTO_DES | TYPHOON_CRYPTO_3DES | TYPHOON_FIBER},
|
|
{ "3Com Typhoon2 (3C990B-FX-97)",
|
|
TYPHOON_CRYPTO_VARIABLE | TYPHOON_FIBER},
|
|
};
|
|
|
|
/* Notes on the new subsystem numbering scheme:
|
|
* bits 0-1 indicate crypto capabilities: (0) variable, (1) DES, or (2) 3DES
|
|
* bit 4 indicates if this card has secured firmware (we don't support it)
|
|
* bit 8 indicates if this is a (0) copper or (1) fiber card
|
|
* bits 12-16 indicate card type: (0) client and (1) server
|
|
*/
|
|
static struct pci_device_id typhoon_pci_tbl[] = {
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0,TYPHOON_TX },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_95,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX95 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_TX_97,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_TX97 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
|
|
PCI_ANY_ID, 0x1000, 0, 0, TYPHOON_TXM },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
|
|
PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FXM },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990B,
|
|
PCI_ANY_ID, 0x2000, 0, 0, TYPHOON_BSVR },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
|
|
PCI_ANY_ID, 0x1101, 0, 0, TYPHOON_FX95 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
|
|
PCI_ANY_ID, 0x1102, 0, 0, TYPHOON_FX97 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
|
|
PCI_ANY_ID, 0x2101, 0, 0, TYPHOON_FX95SVR },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990_FX,
|
|
PCI_ANY_ID, 0x2102, 0, 0, TYPHOON_FX97SVR },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR95,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR95 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR97,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR97 },
|
|
{ PCI_VENDOR_ID_3COM, PCI_DEVICE_ID_3COM_3CR990SVR,
|
|
PCI_ANY_ID, PCI_ANY_ID, 0, 0, TYPHOON_SVR },
|
|
{ 0, }
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, typhoon_pci_tbl);
|
|
|
|
/* Define the shared memory area
|
|
* Align everything the 3XP will normally be using.
|
|
* We'll need to move/align txHi if we start using that ring.
|
|
*/
|
|
#define __3xp_aligned ____cacheline_aligned
|
|
struct typhoon_shared {
|
|
struct typhoon_interface iface;
|
|
struct typhoon_indexes indexes __3xp_aligned;
|
|
struct tx_desc txLo[TXLO_ENTRIES] __3xp_aligned;
|
|
struct rx_desc rxLo[RX_ENTRIES] __3xp_aligned;
|
|
struct rx_desc rxHi[RX_ENTRIES] __3xp_aligned;
|
|
struct cmd_desc cmd[COMMAND_ENTRIES] __3xp_aligned;
|
|
struct resp_desc resp[RESPONSE_ENTRIES] __3xp_aligned;
|
|
struct rx_free rxBuff[RXFREE_ENTRIES] __3xp_aligned;
|
|
u32 zeroWord;
|
|
struct tx_desc txHi[TXHI_ENTRIES];
|
|
} __attribute__ ((packed));
|
|
|
|
struct rxbuff_ent {
|
|
struct sk_buff *skb;
|
|
dma_addr_t dma_addr;
|
|
};
|
|
|
|
struct typhoon {
|
|
/* Tx cache line section */
|
|
struct transmit_ring txLoRing ____cacheline_aligned;
|
|
struct pci_dev * tx_pdev;
|
|
void __iomem *tx_ioaddr;
|
|
u32 txlo_dma_addr;
|
|
|
|
/* Irq/Rx cache line section */
|
|
void __iomem *ioaddr ____cacheline_aligned;
|
|
struct typhoon_indexes *indexes;
|
|
u8 awaiting_resp;
|
|
u8 duplex;
|
|
u8 speed;
|
|
u8 card_state;
|
|
struct basic_ring rxLoRing;
|
|
struct pci_dev * pdev;
|
|
struct net_device * dev;
|
|
spinlock_t state_lock;
|
|
struct vlan_group * vlgrp;
|
|
struct basic_ring rxHiRing;
|
|
struct basic_ring rxBuffRing;
|
|
struct rxbuff_ent rxbuffers[RXENT_ENTRIES];
|
|
|
|
/* general section */
|
|
spinlock_t command_lock ____cacheline_aligned;
|
|
struct basic_ring cmdRing;
|
|
struct basic_ring respRing;
|
|
struct net_device_stats stats;
|
|
struct net_device_stats stats_saved;
|
|
const char * name;
|
|
struct typhoon_shared * shared;
|
|
dma_addr_t shared_dma;
|
|
u16 xcvr_select;
|
|
u16 wol_events;
|
|
u32 offload;
|
|
|
|
/* unused stuff (future use) */
|
|
int capabilities;
|
|
struct transmit_ring txHiRing;
|
|
};
|
|
|
|
enum completion_wait_values {
|
|
NoWait = 0, WaitNoSleep, WaitSleep,
|
|
};
|
|
|
|
/* These are the values for the typhoon.card_state variable.
|
|
* These determine where the statistics will come from in get_stats().
|
|
* The sleep image does not support the statistics we need.
|
|
*/
|
|
enum state_values {
|
|
Sleeping = 0, Running,
|
|
};
|
|
|
|
/* PCI writes are not guaranteed to be posted in order, but outstanding writes
|
|
* cannot pass a read, so this forces current writes to post.
|
|
*/
|
|
#define typhoon_post_pci_writes(x) \
|
|
do { if(likely(use_mmio)) ioread32(x+TYPHOON_REG_HEARTBEAT); } while(0)
|
|
|
|
/* We'll wait up to six seconds for a reset, and half a second normally.
|
|
*/
|
|
#define TYPHOON_UDELAY 50
|
|
#define TYPHOON_RESET_TIMEOUT_SLEEP (6 * HZ)
|
|
#define TYPHOON_RESET_TIMEOUT_NOSLEEP ((6 * 1000000) / TYPHOON_UDELAY)
|
|
#define TYPHOON_WAIT_TIMEOUT ((1000000 / 2) / TYPHOON_UDELAY)
|
|
|
|
#define typhoon_synchronize_irq(x) synchronize_irq(x)
|
|
|
|
#if defined(NETIF_F_TSO)
|
|
#define skb_tso_size(x) (skb_shinfo(x)->gso_size)
|
|
#define TSO_NUM_DESCRIPTORS 2
|
|
#define TSO_OFFLOAD_ON TYPHOON_OFFLOAD_TCP_SEGMENT
|
|
#else
|
|
#define NETIF_F_TSO 0
|
|
#define skb_tso_size(x) 0
|
|
#define TSO_NUM_DESCRIPTORS 0
|
|
#define TSO_OFFLOAD_ON 0
|
|
#endif
|
|
|
|
static inline void
|
|
typhoon_inc_index(u32 *index, const int count, const int num_entries)
|
|
{
|
|
/* Increment a ring index -- we can use this for all rings execept
|
|
* the Rx rings, as they use different size descriptors
|
|
* otherwise, everything is the same size as a cmd_desc
|
|
*/
|
|
*index += count * sizeof(struct cmd_desc);
|
|
*index %= num_entries * sizeof(struct cmd_desc);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_inc_cmd_index(u32 *index, const int count)
|
|
{
|
|
typhoon_inc_index(index, count, COMMAND_ENTRIES);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_inc_resp_index(u32 *index, const int count)
|
|
{
|
|
typhoon_inc_index(index, count, RESPONSE_ENTRIES);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_inc_rxfree_index(u32 *index, const int count)
|
|
{
|
|
typhoon_inc_index(index, count, RXFREE_ENTRIES);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_inc_tx_index(u32 *index, const int count)
|
|
{
|
|
/* if we start using the Hi Tx ring, this needs updateing */
|
|
typhoon_inc_index(index, count, TXLO_ENTRIES);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_inc_rx_index(u32 *index, const int count)
|
|
{
|
|
/* sizeof(struct rx_desc) != sizeof(struct cmd_desc) */
|
|
*index += count * sizeof(struct rx_desc);
|
|
*index %= RX_ENTRIES * sizeof(struct rx_desc);
|
|
}
|
|
|
|
static int
|
|
typhoon_reset(void __iomem *ioaddr, int wait_type)
|
|
{
|
|
int i, err = 0;
|
|
int timeout;
|
|
|
|
if(wait_type == WaitNoSleep)
|
|
timeout = TYPHOON_RESET_TIMEOUT_NOSLEEP;
|
|
else
|
|
timeout = TYPHOON_RESET_TIMEOUT_SLEEP;
|
|
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
|
|
iowrite32(TYPHOON_RESET_ALL, ioaddr + TYPHOON_REG_SOFT_RESET);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
udelay(1);
|
|
iowrite32(TYPHOON_RESET_NONE, ioaddr + TYPHOON_REG_SOFT_RESET);
|
|
|
|
if(wait_type != NoWait) {
|
|
for(i = 0; i < timeout; i++) {
|
|
if(ioread32(ioaddr + TYPHOON_REG_STATUS) ==
|
|
TYPHOON_STATUS_WAITING_FOR_HOST)
|
|
goto out;
|
|
|
|
if(wait_type == WaitSleep)
|
|
schedule_timeout_uninterruptible(1);
|
|
else
|
|
udelay(TYPHOON_UDELAY);
|
|
}
|
|
|
|
err = -ETIMEDOUT;
|
|
}
|
|
|
|
out:
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
|
|
/* The 3XP seems to need a little extra time to complete the load
|
|
* of the sleep image before we can reliably boot it. Failure to
|
|
* do this occasionally results in a hung adapter after boot in
|
|
* typhoon_init_one() while trying to read the MAC address or
|
|
* putting the card to sleep. 3Com's driver waits 5ms, but
|
|
* that seems to be overkill. However, if we can sleep, we might
|
|
* as well give it that much time. Otherwise, we'll give it 500us,
|
|
* which should be enough (I've see it work well at 100us, but still
|
|
* saw occasional problems.)
|
|
*/
|
|
if(wait_type == WaitSleep)
|
|
msleep(5);
|
|
else
|
|
udelay(500);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
typhoon_wait_status(void __iomem *ioaddr, u32 wait_value)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
|
|
if(ioread32(ioaddr + TYPHOON_REG_STATUS) == wait_value)
|
|
goto out;
|
|
udelay(TYPHOON_UDELAY);
|
|
}
|
|
|
|
err = -ETIMEDOUT;
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static inline void
|
|
typhoon_media_status(struct net_device *dev, struct resp_desc *resp)
|
|
{
|
|
if(resp->parm1 & TYPHOON_MEDIA_STAT_NO_LINK)
|
|
netif_carrier_off(dev);
|
|
else
|
|
netif_carrier_on(dev);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_hello(struct typhoon *tp)
|
|
{
|
|
struct basic_ring *ring = &tp->cmdRing;
|
|
struct cmd_desc *cmd;
|
|
|
|
/* We only get a hello request if we've not sent anything to the
|
|
* card in a long while. If the lock is held, then we're in the
|
|
* process of issuing a command, so we don't need to respond.
|
|
*/
|
|
if(spin_trylock(&tp->command_lock)) {
|
|
cmd = (struct cmd_desc *)(ring->ringBase + ring->lastWrite);
|
|
typhoon_inc_cmd_index(&ring->lastWrite, 1);
|
|
|
|
INIT_COMMAND_NO_RESPONSE(cmd, TYPHOON_CMD_HELLO_RESP);
|
|
smp_wmb();
|
|
iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
|
|
spin_unlock(&tp->command_lock);
|
|
}
|
|
}
|
|
|
|
static int
|
|
typhoon_process_response(struct typhoon *tp, int resp_size,
|
|
struct resp_desc *resp_save)
|
|
{
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
struct resp_desc *resp;
|
|
u8 *base = tp->respRing.ringBase;
|
|
int count, len, wrap_len;
|
|
u32 cleared;
|
|
u32 ready;
|
|
|
|
cleared = le32_to_cpu(indexes->respCleared);
|
|
ready = le32_to_cpu(indexes->respReady);
|
|
while(cleared != ready) {
|
|
resp = (struct resp_desc *)(base + cleared);
|
|
count = resp->numDesc + 1;
|
|
if(resp_save && resp->seqNo) {
|
|
if(count > resp_size) {
|
|
resp_save->flags = TYPHOON_RESP_ERROR;
|
|
goto cleanup;
|
|
}
|
|
|
|
wrap_len = 0;
|
|
len = count * sizeof(*resp);
|
|
if(unlikely(cleared + len > RESPONSE_RING_SIZE)) {
|
|
wrap_len = cleared + len - RESPONSE_RING_SIZE;
|
|
len = RESPONSE_RING_SIZE - cleared;
|
|
}
|
|
|
|
memcpy(resp_save, resp, len);
|
|
if(unlikely(wrap_len)) {
|
|
resp_save += len / sizeof(*resp);
|
|
memcpy(resp_save, base, wrap_len);
|
|
}
|
|
|
|
resp_save = NULL;
|
|
} else if(resp->cmd == TYPHOON_CMD_READ_MEDIA_STATUS) {
|
|
typhoon_media_status(tp->dev, resp);
|
|
} else if(resp->cmd == TYPHOON_CMD_HELLO_RESP) {
|
|
typhoon_hello(tp);
|
|
} else {
|
|
printk(KERN_ERR "%s: dumping unexpected response "
|
|
"0x%04x:%d:0x%02x:0x%04x:%08x:%08x\n",
|
|
tp->name, le16_to_cpu(resp->cmd),
|
|
resp->numDesc, resp->flags,
|
|
le16_to_cpu(resp->parm1),
|
|
le32_to_cpu(resp->parm2),
|
|
le32_to_cpu(resp->parm3));
|
|
}
|
|
|
|
cleanup:
|
|
typhoon_inc_resp_index(&cleared, count);
|
|
}
|
|
|
|
indexes->respCleared = cpu_to_le32(cleared);
|
|
wmb();
|
|
return (resp_save == NULL);
|
|
}
|
|
|
|
static inline int
|
|
typhoon_num_free(int lastWrite, int lastRead, int ringSize)
|
|
{
|
|
/* this works for all descriptors but rx_desc, as they are a
|
|
* different size than the cmd_desc -- everyone else is the same
|
|
*/
|
|
lastWrite /= sizeof(struct cmd_desc);
|
|
lastRead /= sizeof(struct cmd_desc);
|
|
return (ringSize + lastRead - lastWrite - 1) % ringSize;
|
|
}
|
|
|
|
static inline int
|
|
typhoon_num_free_cmd(struct typhoon *tp)
|
|
{
|
|
int lastWrite = tp->cmdRing.lastWrite;
|
|
int cmdCleared = le32_to_cpu(tp->indexes->cmdCleared);
|
|
|
|
return typhoon_num_free(lastWrite, cmdCleared, COMMAND_ENTRIES);
|
|
}
|
|
|
|
static inline int
|
|
typhoon_num_free_resp(struct typhoon *tp)
|
|
{
|
|
int respReady = le32_to_cpu(tp->indexes->respReady);
|
|
int respCleared = le32_to_cpu(tp->indexes->respCleared);
|
|
|
|
return typhoon_num_free(respReady, respCleared, RESPONSE_ENTRIES);
|
|
}
|
|
|
|
static inline int
|
|
typhoon_num_free_tx(struct transmit_ring *ring)
|
|
{
|
|
/* if we start using the Hi Tx ring, this needs updating */
|
|
return typhoon_num_free(ring->lastWrite, ring->lastRead, TXLO_ENTRIES);
|
|
}
|
|
|
|
static int
|
|
typhoon_issue_command(struct typhoon *tp, int num_cmd, struct cmd_desc *cmd,
|
|
int num_resp, struct resp_desc *resp)
|
|
{
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
struct basic_ring *ring = &tp->cmdRing;
|
|
struct resp_desc local_resp;
|
|
int i, err = 0;
|
|
int got_resp;
|
|
int freeCmd, freeResp;
|
|
int len, wrap_len;
|
|
|
|
spin_lock(&tp->command_lock);
|
|
|
|
freeCmd = typhoon_num_free_cmd(tp);
|
|
freeResp = typhoon_num_free_resp(tp);
|
|
|
|
if(freeCmd < num_cmd || freeResp < num_resp) {
|
|
printk("%s: no descs for cmd, had (needed) %d (%d) cmd, "
|
|
"%d (%d) resp\n", tp->name, freeCmd, num_cmd,
|
|
freeResp, num_resp);
|
|
err = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
if(cmd->flags & TYPHOON_CMD_RESPOND) {
|
|
/* If we're expecting a response, but the caller hasn't given
|
|
* us a place to put it, we'll provide one.
|
|
*/
|
|
tp->awaiting_resp = 1;
|
|
if(resp == NULL) {
|
|
resp = &local_resp;
|
|
num_resp = 1;
|
|
}
|
|
}
|
|
|
|
wrap_len = 0;
|
|
len = num_cmd * sizeof(*cmd);
|
|
if(unlikely(ring->lastWrite + len > COMMAND_RING_SIZE)) {
|
|
wrap_len = ring->lastWrite + len - COMMAND_RING_SIZE;
|
|
len = COMMAND_RING_SIZE - ring->lastWrite;
|
|
}
|
|
|
|
memcpy(ring->ringBase + ring->lastWrite, cmd, len);
|
|
if(unlikely(wrap_len)) {
|
|
struct cmd_desc *wrap_ptr = cmd;
|
|
wrap_ptr += len / sizeof(*cmd);
|
|
memcpy(ring->ringBase, wrap_ptr, wrap_len);
|
|
}
|
|
|
|
typhoon_inc_cmd_index(&ring->lastWrite, num_cmd);
|
|
|
|
/* "I feel a presence... another warrior is on the mesa."
|
|
*/
|
|
wmb();
|
|
iowrite32(ring->lastWrite, tp->ioaddr + TYPHOON_REG_CMD_READY);
|
|
typhoon_post_pci_writes(tp->ioaddr);
|
|
|
|
if((cmd->flags & TYPHOON_CMD_RESPOND) == 0)
|
|
goto out;
|
|
|
|
/* Ugh. We'll be here about 8ms, spinning our thumbs, unable to
|
|
* preempt or do anything other than take interrupts. So, don't
|
|
* wait for a response unless you have to.
|
|
*
|
|
* I've thought about trying to sleep here, but we're called
|
|
* from many contexts that don't allow that. Also, given the way
|
|
* 3Com has implemented irq coalescing, we would likely timeout --
|
|
* this has been observed in real life!
|
|
*
|
|
* The big killer is we have to wait to get stats from the card,
|
|
* though we could go to a periodic refresh of those if we don't
|
|
* mind them getting somewhat stale. The rest of the waiting
|
|
* commands occur during open/close/suspend/resume, so they aren't
|
|
* time critical. Creating SAs in the future will also have to
|
|
* wait here.
|
|
*/
|
|
got_resp = 0;
|
|
for(i = 0; i < TYPHOON_WAIT_TIMEOUT && !got_resp; i++) {
|
|
if(indexes->respCleared != indexes->respReady)
|
|
got_resp = typhoon_process_response(tp, num_resp,
|
|
resp);
|
|
udelay(TYPHOON_UDELAY);
|
|
}
|
|
|
|
if(!got_resp) {
|
|
err = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
|
|
/* Collect the error response even if we don't care about the
|
|
* rest of the response
|
|
*/
|
|
if(resp->flags & TYPHOON_RESP_ERROR)
|
|
err = -EIO;
|
|
|
|
out:
|
|
if(tp->awaiting_resp) {
|
|
tp->awaiting_resp = 0;
|
|
smp_wmb();
|
|
|
|
/* Ugh. If a response was added to the ring between
|
|
* the call to typhoon_process_response() and the clearing
|
|
* of tp->awaiting_resp, we could have missed the interrupt
|
|
* and it could hang in the ring an indeterminate amount of
|
|
* time. So, check for it, and interrupt ourselves if this
|
|
* is the case.
|
|
*/
|
|
if(indexes->respCleared != indexes->respReady)
|
|
iowrite32(1, tp->ioaddr + TYPHOON_REG_SELF_INTERRUPT);
|
|
}
|
|
|
|
spin_unlock(&tp->command_lock);
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
typhoon_vlan_rx_register(struct net_device *dev, struct vlan_group *grp)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct cmd_desc xp_cmd;
|
|
int err;
|
|
|
|
spin_lock_bh(&tp->state_lock);
|
|
if(!tp->vlgrp != !grp) {
|
|
/* We've either been turned on for the first time, or we've
|
|
* been turned off. Update the 3XP.
|
|
*/
|
|
if(grp)
|
|
tp->offload |= TYPHOON_OFFLOAD_VLAN;
|
|
else
|
|
tp->offload &= ~TYPHOON_OFFLOAD_VLAN;
|
|
|
|
/* If the interface is up, the runtime is running -- and we
|
|
* must be up for the vlan core to call us.
|
|
*
|
|
* Do the command outside of the spin lock, as it is slow.
|
|
*/
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd,
|
|
TYPHOON_CMD_SET_OFFLOAD_TASKS);
|
|
xp_cmd.parm2 = tp->offload;
|
|
xp_cmd.parm3 = tp->offload;
|
|
spin_unlock_bh(&tp->state_lock);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
printk("%s: vlan offload error %d\n", tp->name, -err);
|
|
spin_lock_bh(&tp->state_lock);
|
|
}
|
|
|
|
/* now make the change visible */
|
|
tp->vlgrp = grp;
|
|
spin_unlock_bh(&tp->state_lock);
|
|
}
|
|
|
|
static inline void
|
|
typhoon_tso_fill(struct sk_buff *skb, struct transmit_ring *txRing,
|
|
u32 ring_dma)
|
|
{
|
|
struct tcpopt_desc *tcpd;
|
|
u32 tcpd_offset = ring_dma;
|
|
|
|
tcpd = (struct tcpopt_desc *) (txRing->ringBase + txRing->lastWrite);
|
|
tcpd_offset += txRing->lastWrite;
|
|
tcpd_offset += offsetof(struct tcpopt_desc, bytesTx);
|
|
typhoon_inc_tx_index(&txRing->lastWrite, 1);
|
|
|
|
tcpd->flags = TYPHOON_OPT_DESC | TYPHOON_OPT_TCP_SEG;
|
|
tcpd->numDesc = 1;
|
|
tcpd->mss_flags = cpu_to_le16(skb_tso_size(skb));
|
|
tcpd->mss_flags |= TYPHOON_TSO_FIRST | TYPHOON_TSO_LAST;
|
|
tcpd->respAddrLo = cpu_to_le32(tcpd_offset);
|
|
tcpd->bytesTx = cpu_to_le32(skb->len);
|
|
tcpd->status = 0;
|
|
}
|
|
|
|
static int
|
|
typhoon_start_tx(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct transmit_ring *txRing;
|
|
struct tx_desc *txd, *first_txd;
|
|
dma_addr_t skb_dma;
|
|
int numDesc;
|
|
|
|
/* we have two rings to choose from, but we only use txLo for now
|
|
* If we start using the Hi ring as well, we'll need to update
|
|
* typhoon_stop_runtime(), typhoon_interrupt(), typhoon_num_free_tx(),
|
|
* and TXHI_ENTRIES to match, as well as update the TSO code below
|
|
* to get the right DMA address
|
|
*/
|
|
txRing = &tp->txLoRing;
|
|
|
|
/* We need one descriptor for each fragment of the sk_buff, plus the
|
|
* one for the ->data area of it.
|
|
*
|
|
* The docs say a maximum of 16 fragment descriptors per TCP option
|
|
* descriptor, then make a new packet descriptor and option descriptor
|
|
* for the next 16 fragments. The engineers say just an option
|
|
* descriptor is needed. I've tested up to 26 fragments with a single
|
|
* packet descriptor/option descriptor combo, so I use that for now.
|
|
*
|
|
* If problems develop with TSO, check this first.
|
|
*/
|
|
numDesc = skb_shinfo(skb)->nr_frags + 1;
|
|
if (skb_is_gso(skb))
|
|
numDesc++;
|
|
|
|
/* When checking for free space in the ring, we need to also
|
|
* account for the initial Tx descriptor, and we always must leave
|
|
* at least one descriptor unused in the ring so that it doesn't
|
|
* wrap and look empty.
|
|
*
|
|
* The only time we should loop here is when we hit the race
|
|
* between marking the queue awake and updating the cleared index.
|
|
* Just loop and it will appear. This comes from the acenic driver.
|
|
*/
|
|
while(unlikely(typhoon_num_free_tx(txRing) < (numDesc + 2)))
|
|
smp_rmb();
|
|
|
|
first_txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
|
|
typhoon_inc_tx_index(&txRing->lastWrite, 1);
|
|
|
|
first_txd->flags = TYPHOON_TX_DESC | TYPHOON_DESC_VALID;
|
|
first_txd->numDesc = 0;
|
|
first_txd->len = 0;
|
|
first_txd->addr = (u64)((unsigned long) skb) & 0xffffffff;
|
|
first_txd->addrHi = (u64)((unsigned long) skb) >> 32;
|
|
first_txd->processFlags = 0;
|
|
|
|
if(skb->ip_summed == CHECKSUM_PARTIAL) {
|
|
/* The 3XP will figure out if this is UDP/TCP */
|
|
first_txd->processFlags |= TYPHOON_TX_PF_TCP_CHKSUM;
|
|
first_txd->processFlags |= TYPHOON_TX_PF_UDP_CHKSUM;
|
|
first_txd->processFlags |= TYPHOON_TX_PF_IP_CHKSUM;
|
|
}
|
|
|
|
if(vlan_tx_tag_present(skb)) {
|
|
first_txd->processFlags |=
|
|
TYPHOON_TX_PF_INSERT_VLAN | TYPHOON_TX_PF_VLAN_PRIORITY;
|
|
first_txd->processFlags |=
|
|
cpu_to_le32(htons(vlan_tx_tag_get(skb)) <<
|
|
TYPHOON_TX_PF_VLAN_TAG_SHIFT);
|
|
}
|
|
|
|
if (skb_is_gso(skb)) {
|
|
first_txd->processFlags |= TYPHOON_TX_PF_TCP_SEGMENT;
|
|
first_txd->numDesc++;
|
|
|
|
typhoon_tso_fill(skb, txRing, tp->txlo_dma_addr);
|
|
}
|
|
|
|
txd = (struct tx_desc *) (txRing->ringBase + txRing->lastWrite);
|
|
typhoon_inc_tx_index(&txRing->lastWrite, 1);
|
|
|
|
/* No need to worry about padding packet -- the firmware pads
|
|
* it with zeros to ETH_ZLEN for us.
|
|
*/
|
|
if(skb_shinfo(skb)->nr_frags == 0) {
|
|
skb_dma = pci_map_single(tp->tx_pdev, skb->data, skb->len,
|
|
PCI_DMA_TODEVICE);
|
|
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
|
|
txd->len = cpu_to_le16(skb->len);
|
|
txd->addr = cpu_to_le32(skb_dma);
|
|
txd->addrHi = 0;
|
|
first_txd->numDesc++;
|
|
} else {
|
|
int i, len;
|
|
|
|
len = skb_headlen(skb);
|
|
skb_dma = pci_map_single(tp->tx_pdev, skb->data, len,
|
|
PCI_DMA_TODEVICE);
|
|
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
|
|
txd->len = cpu_to_le16(len);
|
|
txd->addr = cpu_to_le32(skb_dma);
|
|
txd->addrHi = 0;
|
|
first_txd->numDesc++;
|
|
|
|
for(i = 0; i < skb_shinfo(skb)->nr_frags; i++) {
|
|
skb_frag_t *frag = &skb_shinfo(skb)->frags[i];
|
|
void *frag_addr;
|
|
|
|
txd = (struct tx_desc *) (txRing->ringBase +
|
|
txRing->lastWrite);
|
|
typhoon_inc_tx_index(&txRing->lastWrite, 1);
|
|
|
|
len = frag->size;
|
|
frag_addr = (void *) page_address(frag->page) +
|
|
frag->page_offset;
|
|
skb_dma = pci_map_single(tp->tx_pdev, frag_addr, len,
|
|
PCI_DMA_TODEVICE);
|
|
txd->flags = TYPHOON_FRAG_DESC | TYPHOON_DESC_VALID;
|
|
txd->len = cpu_to_le16(len);
|
|
txd->addr = cpu_to_le32(skb_dma);
|
|
txd->addrHi = 0;
|
|
first_txd->numDesc++;
|
|
}
|
|
}
|
|
|
|
/* Kick the 3XP
|
|
*/
|
|
wmb();
|
|
iowrite32(txRing->lastWrite, tp->tx_ioaddr + txRing->writeRegister);
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
/* If we don't have room to put the worst case packet on the
|
|
* queue, then we must stop the queue. We need 2 extra
|
|
* descriptors -- one to prevent ring wrap, and one for the
|
|
* Tx header.
|
|
*/
|
|
numDesc = MAX_SKB_FRAGS + TSO_NUM_DESCRIPTORS + 1;
|
|
|
|
if(typhoon_num_free_tx(txRing) < (numDesc + 2)) {
|
|
netif_stop_queue(dev);
|
|
|
|
/* A Tx complete IRQ could have gotten inbetween, making
|
|
* the ring free again. Only need to recheck here, since
|
|
* Tx is serialized.
|
|
*/
|
|
if(typhoon_num_free_tx(txRing) >= (numDesc + 2))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
typhoon_set_rx_mode(struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct cmd_desc xp_cmd;
|
|
u32 mc_filter[2];
|
|
u16 filter;
|
|
|
|
filter = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
|
|
if(dev->flags & IFF_PROMISC) {
|
|
filter |= TYPHOON_RX_FILTER_PROMISCOUS;
|
|
} else if((dev->mc_count > multicast_filter_limit) ||
|
|
(dev->flags & IFF_ALLMULTI)) {
|
|
/* Too many to match, or accept all multicasts. */
|
|
filter |= TYPHOON_RX_FILTER_ALL_MCAST;
|
|
} else if(dev->mc_count) {
|
|
struct dev_mc_list *mclist;
|
|
int i;
|
|
|
|
memset(mc_filter, 0, sizeof(mc_filter));
|
|
for(i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count;
|
|
i++, mclist = mclist->next) {
|
|
int bit = ether_crc(ETH_ALEN, mclist->dmi_addr) & 0x3f;
|
|
mc_filter[bit >> 5] |= 1 << (bit & 0x1f);
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd,
|
|
TYPHOON_CMD_SET_MULTICAST_HASH);
|
|
xp_cmd.parm1 = TYPHOON_MCAST_HASH_SET;
|
|
xp_cmd.parm2 = cpu_to_le32(mc_filter[0]);
|
|
xp_cmd.parm3 = cpu_to_le32(mc_filter[1]);
|
|
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
|
|
filter |= TYPHOON_RX_FILTER_MCAST_HASH;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
|
|
xp_cmd.parm1 = filter;
|
|
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
}
|
|
|
|
static int
|
|
typhoon_do_get_stats(struct typhoon *tp)
|
|
{
|
|
struct net_device_stats *stats = &tp->stats;
|
|
struct net_device_stats *saved = &tp->stats_saved;
|
|
struct cmd_desc xp_cmd;
|
|
struct resp_desc xp_resp[7];
|
|
struct stats_resp *s = (struct stats_resp *) xp_resp;
|
|
int err;
|
|
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_STATS);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 7, xp_resp);
|
|
if(err < 0)
|
|
return err;
|
|
|
|
/* 3Com's Linux driver uses txMultipleCollisions as it's
|
|
* collisions value, but there is some other collision info as well...
|
|
*
|
|
* The extra status reported would be a good candidate for
|
|
* ethtool_ops->get_{strings,stats}()
|
|
*/
|
|
stats->tx_packets = le32_to_cpu(s->txPackets);
|
|
stats->tx_bytes = le32_to_cpu(s->txBytes);
|
|
stats->tx_errors = le32_to_cpu(s->txCarrierLost);
|
|
stats->tx_carrier_errors = le32_to_cpu(s->txCarrierLost);
|
|
stats->collisions = le32_to_cpu(s->txMultipleCollisions);
|
|
stats->rx_packets = le32_to_cpu(s->rxPacketsGood);
|
|
stats->rx_bytes = le32_to_cpu(s->rxBytesGood);
|
|
stats->rx_fifo_errors = le32_to_cpu(s->rxFifoOverruns);
|
|
stats->rx_errors = le32_to_cpu(s->rxFifoOverruns) +
|
|
le32_to_cpu(s->BadSSD) + le32_to_cpu(s->rxCrcErrors);
|
|
stats->rx_crc_errors = le32_to_cpu(s->rxCrcErrors);
|
|
stats->rx_length_errors = le32_to_cpu(s->rxOversized);
|
|
tp->speed = (s->linkStatus & TYPHOON_LINK_100MBPS) ?
|
|
SPEED_100 : SPEED_10;
|
|
tp->duplex = (s->linkStatus & TYPHOON_LINK_FULL_DUPLEX) ?
|
|
DUPLEX_FULL : DUPLEX_HALF;
|
|
|
|
/* add in the saved statistics
|
|
*/
|
|
stats->tx_packets += saved->tx_packets;
|
|
stats->tx_bytes += saved->tx_bytes;
|
|
stats->tx_errors += saved->tx_errors;
|
|
stats->collisions += saved->collisions;
|
|
stats->rx_packets += saved->rx_packets;
|
|
stats->rx_bytes += saved->rx_bytes;
|
|
stats->rx_fifo_errors += saved->rx_fifo_errors;
|
|
stats->rx_errors += saved->rx_errors;
|
|
stats->rx_crc_errors += saved->rx_crc_errors;
|
|
stats->rx_length_errors += saved->rx_length_errors;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct net_device_stats *
|
|
typhoon_get_stats(struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct net_device_stats *stats = &tp->stats;
|
|
struct net_device_stats *saved = &tp->stats_saved;
|
|
|
|
smp_rmb();
|
|
if(tp->card_state == Sleeping)
|
|
return saved;
|
|
|
|
if(typhoon_do_get_stats(tp) < 0) {
|
|
printk(KERN_ERR "%s: error getting stats\n", dev->name);
|
|
return saved;
|
|
}
|
|
|
|
return stats;
|
|
}
|
|
|
|
static int
|
|
typhoon_set_mac_address(struct net_device *dev, void *addr)
|
|
{
|
|
struct sockaddr *saddr = (struct sockaddr *) addr;
|
|
|
|
if(netif_running(dev))
|
|
return -EBUSY;
|
|
|
|
memcpy(dev->dev_addr, saddr->sa_data, dev->addr_len);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
typhoon_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct pci_dev *pci_dev = tp->pdev;
|
|
struct cmd_desc xp_cmd;
|
|
struct resp_desc xp_resp[3];
|
|
|
|
smp_rmb();
|
|
if(tp->card_state == Sleeping) {
|
|
strcpy(info->fw_version, "Sleep image");
|
|
} else {
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
|
|
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
|
|
strcpy(info->fw_version, "Unknown runtime");
|
|
} else {
|
|
u32 sleep_ver = xp_resp[0].parm2;
|
|
snprintf(info->fw_version, 32, "%02x.%03x.%03x",
|
|
sleep_ver >> 24, (sleep_ver >> 12) & 0xfff,
|
|
sleep_ver & 0xfff);
|
|
}
|
|
}
|
|
|
|
strcpy(info->driver, DRV_MODULE_NAME);
|
|
strcpy(info->version, DRV_MODULE_VERSION);
|
|
strcpy(info->bus_info, pci_name(pci_dev));
|
|
}
|
|
|
|
static int
|
|
typhoon_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
cmd->supported = SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
|
|
SUPPORTED_Autoneg;
|
|
|
|
switch (tp->xcvr_select) {
|
|
case TYPHOON_XCVR_10HALF:
|
|
cmd->advertising = ADVERTISED_10baseT_Half;
|
|
break;
|
|
case TYPHOON_XCVR_10FULL:
|
|
cmd->advertising = ADVERTISED_10baseT_Full;
|
|
break;
|
|
case TYPHOON_XCVR_100HALF:
|
|
cmd->advertising = ADVERTISED_100baseT_Half;
|
|
break;
|
|
case TYPHOON_XCVR_100FULL:
|
|
cmd->advertising = ADVERTISED_100baseT_Full;
|
|
break;
|
|
case TYPHOON_XCVR_AUTONEG:
|
|
cmd->advertising = ADVERTISED_10baseT_Half |
|
|
ADVERTISED_10baseT_Full |
|
|
ADVERTISED_100baseT_Half |
|
|
ADVERTISED_100baseT_Full |
|
|
ADVERTISED_Autoneg;
|
|
break;
|
|
}
|
|
|
|
if(tp->capabilities & TYPHOON_FIBER) {
|
|
cmd->supported |= SUPPORTED_FIBRE;
|
|
cmd->advertising |= ADVERTISED_FIBRE;
|
|
cmd->port = PORT_FIBRE;
|
|
} else {
|
|
cmd->supported |= SUPPORTED_10baseT_Half |
|
|
SUPPORTED_10baseT_Full |
|
|
SUPPORTED_TP;
|
|
cmd->advertising |= ADVERTISED_TP;
|
|
cmd->port = PORT_TP;
|
|
}
|
|
|
|
/* need to get stats to make these link speed/duplex valid */
|
|
typhoon_do_get_stats(tp);
|
|
cmd->speed = tp->speed;
|
|
cmd->duplex = tp->duplex;
|
|
cmd->phy_address = 0;
|
|
cmd->transceiver = XCVR_INTERNAL;
|
|
if(tp->xcvr_select == TYPHOON_XCVR_AUTONEG)
|
|
cmd->autoneg = AUTONEG_ENABLE;
|
|
else
|
|
cmd->autoneg = AUTONEG_DISABLE;
|
|
cmd->maxtxpkt = 1;
|
|
cmd->maxrxpkt = 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
typhoon_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct cmd_desc xp_cmd;
|
|
int xcvr;
|
|
int err;
|
|
|
|
err = -EINVAL;
|
|
if(cmd->autoneg == AUTONEG_ENABLE) {
|
|
xcvr = TYPHOON_XCVR_AUTONEG;
|
|
} else {
|
|
if(cmd->duplex == DUPLEX_HALF) {
|
|
if(cmd->speed == SPEED_10)
|
|
xcvr = TYPHOON_XCVR_10HALF;
|
|
else if(cmd->speed == SPEED_100)
|
|
xcvr = TYPHOON_XCVR_100HALF;
|
|
else
|
|
goto out;
|
|
} else if(cmd->duplex == DUPLEX_FULL) {
|
|
if(cmd->speed == SPEED_10)
|
|
xcvr = TYPHOON_XCVR_10FULL;
|
|
else if(cmd->speed == SPEED_100)
|
|
xcvr = TYPHOON_XCVR_100FULL;
|
|
else
|
|
goto out;
|
|
} else
|
|
goto out;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT);
|
|
xp_cmd.parm1 = cpu_to_le16(xcvr);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto out;
|
|
|
|
tp->xcvr_select = xcvr;
|
|
if(cmd->autoneg == AUTONEG_ENABLE) {
|
|
tp->speed = 0xff; /* invalid */
|
|
tp->duplex = 0xff; /* invalid */
|
|
} else {
|
|
tp->speed = cmd->speed;
|
|
tp->duplex = cmd->duplex;
|
|
}
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
typhoon_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
wol->supported = WAKE_PHY | WAKE_MAGIC;
|
|
wol->wolopts = 0;
|
|
if(tp->wol_events & TYPHOON_WAKE_LINK_EVENT)
|
|
wol->wolopts |= WAKE_PHY;
|
|
if(tp->wol_events & TYPHOON_WAKE_MAGIC_PKT)
|
|
wol->wolopts |= WAKE_MAGIC;
|
|
memset(&wol->sopass, 0, sizeof(wol->sopass));
|
|
}
|
|
|
|
static int
|
|
typhoon_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
if(wol->wolopts & ~(WAKE_PHY | WAKE_MAGIC))
|
|
return -EINVAL;
|
|
|
|
tp->wol_events = 0;
|
|
if(wol->wolopts & WAKE_PHY)
|
|
tp->wol_events |= TYPHOON_WAKE_LINK_EVENT;
|
|
if(wol->wolopts & WAKE_MAGIC)
|
|
tp->wol_events |= TYPHOON_WAKE_MAGIC_PKT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static u32
|
|
typhoon_get_rx_csum(struct net_device *dev)
|
|
{
|
|
/* For now, we don't allow turning off RX checksums.
|
|
*/
|
|
return 1;
|
|
}
|
|
|
|
static void
|
|
typhoon_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ering)
|
|
{
|
|
ering->rx_max_pending = RXENT_ENTRIES;
|
|
ering->rx_mini_max_pending = 0;
|
|
ering->rx_jumbo_max_pending = 0;
|
|
ering->tx_max_pending = TXLO_ENTRIES - 1;
|
|
|
|
ering->rx_pending = RXENT_ENTRIES;
|
|
ering->rx_mini_pending = 0;
|
|
ering->rx_jumbo_pending = 0;
|
|
ering->tx_pending = TXLO_ENTRIES - 1;
|
|
}
|
|
|
|
static const struct ethtool_ops typhoon_ethtool_ops = {
|
|
.get_settings = typhoon_get_settings,
|
|
.set_settings = typhoon_set_settings,
|
|
.get_drvinfo = typhoon_get_drvinfo,
|
|
.get_wol = typhoon_get_wol,
|
|
.set_wol = typhoon_set_wol,
|
|
.get_link = ethtool_op_get_link,
|
|
.get_rx_csum = typhoon_get_rx_csum,
|
|
.get_tx_csum = ethtool_op_get_tx_csum,
|
|
.set_tx_csum = ethtool_op_set_tx_csum,
|
|
.get_sg = ethtool_op_get_sg,
|
|
.set_sg = ethtool_op_set_sg,
|
|
.get_tso = ethtool_op_get_tso,
|
|
.set_tso = ethtool_op_set_tso,
|
|
.get_ringparam = typhoon_get_ringparam,
|
|
};
|
|
|
|
static int
|
|
typhoon_wait_interrupt(void __iomem *ioaddr)
|
|
{
|
|
int i, err = 0;
|
|
|
|
for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
|
|
if(ioread32(ioaddr + TYPHOON_REG_INTR_STATUS) &
|
|
TYPHOON_INTR_BOOTCMD)
|
|
goto out;
|
|
udelay(TYPHOON_UDELAY);
|
|
}
|
|
|
|
err = -ETIMEDOUT;
|
|
|
|
out:
|
|
iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
return err;
|
|
}
|
|
|
|
#define shared_offset(x) offsetof(struct typhoon_shared, x)
|
|
|
|
static void
|
|
typhoon_init_interface(struct typhoon *tp)
|
|
{
|
|
struct typhoon_interface *iface = &tp->shared->iface;
|
|
dma_addr_t shared_dma;
|
|
|
|
memset(tp->shared, 0, sizeof(struct typhoon_shared));
|
|
|
|
/* The *Hi members of iface are all init'd to zero by the memset().
|
|
*/
|
|
shared_dma = tp->shared_dma + shared_offset(indexes);
|
|
iface->ringIndex = cpu_to_le32(shared_dma);
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(txLo);
|
|
iface->txLoAddr = cpu_to_le32(shared_dma);
|
|
iface->txLoSize = cpu_to_le32(TXLO_ENTRIES * sizeof(struct tx_desc));
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(txHi);
|
|
iface->txHiAddr = cpu_to_le32(shared_dma);
|
|
iface->txHiSize = cpu_to_le32(TXHI_ENTRIES * sizeof(struct tx_desc));
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(rxBuff);
|
|
iface->rxBuffAddr = cpu_to_le32(shared_dma);
|
|
iface->rxBuffSize = cpu_to_le32(RXFREE_ENTRIES *
|
|
sizeof(struct rx_free));
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(rxLo);
|
|
iface->rxLoAddr = cpu_to_le32(shared_dma);
|
|
iface->rxLoSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc));
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(rxHi);
|
|
iface->rxHiAddr = cpu_to_le32(shared_dma);
|
|
iface->rxHiSize = cpu_to_le32(RX_ENTRIES * sizeof(struct rx_desc));
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(cmd);
|
|
iface->cmdAddr = cpu_to_le32(shared_dma);
|
|
iface->cmdSize = cpu_to_le32(COMMAND_RING_SIZE);
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(resp);
|
|
iface->respAddr = cpu_to_le32(shared_dma);
|
|
iface->respSize = cpu_to_le32(RESPONSE_RING_SIZE);
|
|
|
|
shared_dma = tp->shared_dma + shared_offset(zeroWord);
|
|
iface->zeroAddr = cpu_to_le32(shared_dma);
|
|
|
|
tp->indexes = &tp->shared->indexes;
|
|
tp->txLoRing.ringBase = (u8 *) tp->shared->txLo;
|
|
tp->txHiRing.ringBase = (u8 *) tp->shared->txHi;
|
|
tp->rxLoRing.ringBase = (u8 *) tp->shared->rxLo;
|
|
tp->rxHiRing.ringBase = (u8 *) tp->shared->rxHi;
|
|
tp->rxBuffRing.ringBase = (u8 *) tp->shared->rxBuff;
|
|
tp->cmdRing.ringBase = (u8 *) tp->shared->cmd;
|
|
tp->respRing.ringBase = (u8 *) tp->shared->resp;
|
|
|
|
tp->txLoRing.writeRegister = TYPHOON_REG_TX_LO_READY;
|
|
tp->txHiRing.writeRegister = TYPHOON_REG_TX_HI_READY;
|
|
|
|
tp->txlo_dma_addr = iface->txLoAddr;
|
|
tp->card_state = Sleeping;
|
|
smp_wmb();
|
|
|
|
tp->offload = TYPHOON_OFFLOAD_IP_CHKSUM | TYPHOON_OFFLOAD_TCP_CHKSUM;
|
|
tp->offload |= TYPHOON_OFFLOAD_UDP_CHKSUM | TSO_OFFLOAD_ON;
|
|
|
|
spin_lock_init(&tp->command_lock);
|
|
spin_lock_init(&tp->state_lock);
|
|
}
|
|
|
|
static void
|
|
typhoon_init_rings(struct typhoon *tp)
|
|
{
|
|
memset(tp->indexes, 0, sizeof(struct typhoon_indexes));
|
|
|
|
tp->txLoRing.lastWrite = 0;
|
|
tp->txHiRing.lastWrite = 0;
|
|
tp->rxLoRing.lastWrite = 0;
|
|
tp->rxHiRing.lastWrite = 0;
|
|
tp->rxBuffRing.lastWrite = 0;
|
|
tp->cmdRing.lastWrite = 0;
|
|
tp->cmdRing.lastWrite = 0;
|
|
|
|
tp->txLoRing.lastRead = 0;
|
|
tp->txHiRing.lastRead = 0;
|
|
}
|
|
|
|
static int
|
|
typhoon_download_firmware(struct typhoon *tp)
|
|
{
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
struct pci_dev *pdev = tp->pdev;
|
|
struct typhoon_file_header *fHdr;
|
|
struct typhoon_section_header *sHdr;
|
|
u8 *image_data;
|
|
void *dpage;
|
|
dma_addr_t dpage_dma;
|
|
unsigned int csum;
|
|
u32 irqEnabled;
|
|
u32 irqMasked;
|
|
u32 numSections;
|
|
u32 section_len;
|
|
u32 len;
|
|
u32 load_addr;
|
|
u32 hmac;
|
|
int i;
|
|
int err;
|
|
|
|
err = -EINVAL;
|
|
fHdr = (struct typhoon_file_header *) typhoon_firmware_image;
|
|
image_data = (u8 *) fHdr;
|
|
|
|
if(memcmp(fHdr->tag, "TYPHOON", 8)) {
|
|
printk(KERN_ERR "%s: Invalid firmware image!\n", tp->name);
|
|
goto err_out;
|
|
}
|
|
|
|
/* Cannot just map the firmware image using pci_map_single() as
|
|
* the firmware is part of the kernel/module image, so we allocate
|
|
* some consistent memory to copy the sections into, as it is simpler,
|
|
* and short-lived. If we ever split out and require a userland
|
|
* firmware loader, then we can revisit this.
|
|
*/
|
|
err = -ENOMEM;
|
|
dpage = pci_alloc_consistent(pdev, PAGE_SIZE, &dpage_dma);
|
|
if(!dpage) {
|
|
printk(KERN_ERR "%s: no DMA mem for firmware\n", tp->name);
|
|
goto err_out;
|
|
}
|
|
|
|
irqEnabled = ioread32(ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
iowrite32(irqEnabled | TYPHOON_INTR_BOOTCMD,
|
|
ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
irqMasked = ioread32(ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(irqMasked | TYPHOON_INTR_BOOTCMD,
|
|
ioaddr + TYPHOON_REG_INTR_MASK);
|
|
|
|
err = -ETIMEDOUT;
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
|
|
printk(KERN_ERR "%s: card ready timeout\n", tp->name);
|
|
goto err_out_irq;
|
|
}
|
|
|
|
numSections = le32_to_cpu(fHdr->numSections);
|
|
load_addr = le32_to_cpu(fHdr->startAddr);
|
|
|
|
iowrite32(TYPHOON_INTR_BOOTCMD, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
iowrite32(load_addr, ioaddr + TYPHOON_REG_DOWNLOAD_BOOT_ADDR);
|
|
hmac = le32_to_cpu(fHdr->hmacDigest[0]);
|
|
iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_0);
|
|
hmac = le32_to_cpu(fHdr->hmacDigest[1]);
|
|
iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_1);
|
|
hmac = le32_to_cpu(fHdr->hmacDigest[2]);
|
|
iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_2);
|
|
hmac = le32_to_cpu(fHdr->hmacDigest[3]);
|
|
iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_3);
|
|
hmac = le32_to_cpu(fHdr->hmacDigest[4]);
|
|
iowrite32(hmac, ioaddr + TYPHOON_REG_DOWNLOAD_HMAC_4);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
iowrite32(TYPHOON_BOOTCMD_RUNTIME_IMAGE, ioaddr + TYPHOON_REG_COMMAND);
|
|
|
|
image_data += sizeof(struct typhoon_file_header);
|
|
|
|
/* The ioread32() in typhoon_wait_interrupt() will force the
|
|
* last write to the command register to post, so
|
|
* we don't need a typhoon_post_pci_writes() after it.
|
|
*/
|
|
for(i = 0; i < numSections; i++) {
|
|
sHdr = (struct typhoon_section_header *) image_data;
|
|
image_data += sizeof(struct typhoon_section_header);
|
|
load_addr = le32_to_cpu(sHdr->startAddr);
|
|
section_len = le32_to_cpu(sHdr->len);
|
|
|
|
while(section_len) {
|
|
len = min_t(u32, section_len, PAGE_SIZE);
|
|
|
|
if(typhoon_wait_interrupt(ioaddr) < 0 ||
|
|
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
|
|
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
|
|
printk(KERN_ERR "%s: segment ready timeout\n",
|
|
tp->name);
|
|
goto err_out_irq;
|
|
}
|
|
|
|
/* Do an pseudo IPv4 checksum on the data -- first
|
|
* need to convert each u16 to cpu order before
|
|
* summing. Fortunately, due to the properties of
|
|
* the checksum, we can do this once, at the end.
|
|
*/
|
|
csum = csum_partial_copy_nocheck(image_data, dpage,
|
|
len, 0);
|
|
csum = csum_fold(csum);
|
|
csum = le16_to_cpu(csum);
|
|
|
|
iowrite32(len, ioaddr + TYPHOON_REG_BOOT_LENGTH);
|
|
iowrite32(csum, ioaddr + TYPHOON_REG_BOOT_CHECKSUM);
|
|
iowrite32(load_addr,
|
|
ioaddr + TYPHOON_REG_BOOT_DEST_ADDR);
|
|
iowrite32(0, ioaddr + TYPHOON_REG_BOOT_DATA_HI);
|
|
iowrite32(dpage_dma, ioaddr + TYPHOON_REG_BOOT_DATA_LO);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
iowrite32(TYPHOON_BOOTCMD_SEG_AVAILABLE,
|
|
ioaddr + TYPHOON_REG_COMMAND);
|
|
|
|
image_data += len;
|
|
load_addr += len;
|
|
section_len -= len;
|
|
}
|
|
}
|
|
|
|
if(typhoon_wait_interrupt(ioaddr) < 0 ||
|
|
ioread32(ioaddr + TYPHOON_REG_STATUS) !=
|
|
TYPHOON_STATUS_WAITING_FOR_SEGMENT) {
|
|
printk(KERN_ERR "%s: final segment ready timeout\n", tp->name);
|
|
goto err_out_irq;
|
|
}
|
|
|
|
iowrite32(TYPHOON_BOOTCMD_DNLD_COMPLETE, ioaddr + TYPHOON_REG_COMMAND);
|
|
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
|
|
printk(KERN_ERR "%s: boot ready timeout, status 0x%0x\n",
|
|
tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
|
|
goto err_out_irq;
|
|
}
|
|
|
|
err = 0;
|
|
|
|
err_out_irq:
|
|
iowrite32(irqMasked, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(irqEnabled, ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
|
|
pci_free_consistent(pdev, PAGE_SIZE, dpage, dpage_dma);
|
|
|
|
err_out:
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
typhoon_boot_3XP(struct typhoon *tp, u32 initial_status)
|
|
{
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
|
|
if(typhoon_wait_status(ioaddr, initial_status) < 0) {
|
|
printk(KERN_ERR "%s: boot ready timeout\n", tp->name);
|
|
goto out_timeout;
|
|
}
|
|
|
|
iowrite32(0, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_HI);
|
|
iowrite32(tp->shared_dma, ioaddr + TYPHOON_REG_BOOT_RECORD_ADDR_LO);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
iowrite32(TYPHOON_BOOTCMD_REG_BOOT_RECORD,
|
|
ioaddr + TYPHOON_REG_COMMAND);
|
|
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_RUNNING) < 0) {
|
|
printk(KERN_ERR "%s: boot finish timeout (status 0x%x)\n",
|
|
tp->name, ioread32(ioaddr + TYPHOON_REG_STATUS));
|
|
goto out_timeout;
|
|
}
|
|
|
|
/* Clear the Transmit and Command ready registers
|
|
*/
|
|
iowrite32(0, ioaddr + TYPHOON_REG_TX_HI_READY);
|
|
iowrite32(0, ioaddr + TYPHOON_REG_CMD_READY);
|
|
iowrite32(0, ioaddr + TYPHOON_REG_TX_LO_READY);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
iowrite32(TYPHOON_BOOTCMD_BOOT, ioaddr + TYPHOON_REG_COMMAND);
|
|
|
|
return 0;
|
|
|
|
out_timeout:
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static u32
|
|
typhoon_clean_tx(struct typhoon *tp, struct transmit_ring *txRing,
|
|
volatile u32 * index)
|
|
{
|
|
u32 lastRead = txRing->lastRead;
|
|
struct tx_desc *tx;
|
|
dma_addr_t skb_dma;
|
|
int dma_len;
|
|
int type;
|
|
|
|
while(lastRead != le32_to_cpu(*index)) {
|
|
tx = (struct tx_desc *) (txRing->ringBase + lastRead);
|
|
type = tx->flags & TYPHOON_TYPE_MASK;
|
|
|
|
if(type == TYPHOON_TX_DESC) {
|
|
/* This tx_desc describes a packet.
|
|
*/
|
|
unsigned long ptr = tx->addr | ((u64)tx->addrHi << 32);
|
|
struct sk_buff *skb = (struct sk_buff *) ptr;
|
|
dev_kfree_skb_irq(skb);
|
|
} else if(type == TYPHOON_FRAG_DESC) {
|
|
/* This tx_desc describes a memory mapping. Free it.
|
|
*/
|
|
skb_dma = (dma_addr_t) le32_to_cpu(tx->addr);
|
|
dma_len = le16_to_cpu(tx->len);
|
|
pci_unmap_single(tp->pdev, skb_dma, dma_len,
|
|
PCI_DMA_TODEVICE);
|
|
}
|
|
|
|
tx->flags = 0;
|
|
typhoon_inc_tx_index(&lastRead, 1);
|
|
}
|
|
|
|
return lastRead;
|
|
}
|
|
|
|
static void
|
|
typhoon_tx_complete(struct typhoon *tp, struct transmit_ring *txRing,
|
|
volatile u32 * index)
|
|
{
|
|
u32 lastRead;
|
|
int numDesc = MAX_SKB_FRAGS + 1;
|
|
|
|
/* This will need changing if we start to use the Hi Tx ring. */
|
|
lastRead = typhoon_clean_tx(tp, txRing, index);
|
|
if(netif_queue_stopped(tp->dev) && typhoon_num_free(txRing->lastWrite,
|
|
lastRead, TXLO_ENTRIES) > (numDesc + 2))
|
|
netif_wake_queue(tp->dev);
|
|
|
|
txRing->lastRead = lastRead;
|
|
smp_wmb();
|
|
}
|
|
|
|
static void
|
|
typhoon_recycle_rx_skb(struct typhoon *tp, u32 idx)
|
|
{
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
struct rxbuff_ent *rxb = &tp->rxbuffers[idx];
|
|
struct basic_ring *ring = &tp->rxBuffRing;
|
|
struct rx_free *r;
|
|
|
|
if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
|
|
indexes->rxBuffCleared) {
|
|
/* no room in ring, just drop the skb
|
|
*/
|
|
dev_kfree_skb_any(rxb->skb);
|
|
rxb->skb = NULL;
|
|
return;
|
|
}
|
|
|
|
r = (struct rx_free *) (ring->ringBase + ring->lastWrite);
|
|
typhoon_inc_rxfree_index(&ring->lastWrite, 1);
|
|
r->virtAddr = idx;
|
|
r->physAddr = cpu_to_le32(rxb->dma_addr);
|
|
|
|
/* Tell the card about it */
|
|
wmb();
|
|
indexes->rxBuffReady = cpu_to_le32(ring->lastWrite);
|
|
}
|
|
|
|
static int
|
|
typhoon_alloc_rx_skb(struct typhoon *tp, u32 idx)
|
|
{
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
struct rxbuff_ent *rxb = &tp->rxbuffers[idx];
|
|
struct basic_ring *ring = &tp->rxBuffRing;
|
|
struct rx_free *r;
|
|
struct sk_buff *skb;
|
|
dma_addr_t dma_addr;
|
|
|
|
rxb->skb = NULL;
|
|
|
|
if((ring->lastWrite + sizeof(*r)) % (RXFREE_ENTRIES * sizeof(*r)) ==
|
|
indexes->rxBuffCleared)
|
|
return -ENOMEM;
|
|
|
|
skb = dev_alloc_skb(PKT_BUF_SZ);
|
|
if(!skb)
|
|
return -ENOMEM;
|
|
|
|
#if 0
|
|
/* Please, 3com, fix the firmware to allow DMA to a unaligned
|
|
* address! Pretty please?
|
|
*/
|
|
skb_reserve(skb, 2);
|
|
#endif
|
|
|
|
skb->dev = tp->dev;
|
|
dma_addr = pci_map_single(tp->pdev, skb->data,
|
|
PKT_BUF_SZ, PCI_DMA_FROMDEVICE);
|
|
|
|
/* Since no card does 64 bit DAC, the high bits will never
|
|
* change from zero.
|
|
*/
|
|
r = (struct rx_free *) (ring->ringBase + ring->lastWrite);
|
|
typhoon_inc_rxfree_index(&ring->lastWrite, 1);
|
|
r->virtAddr = idx;
|
|
r->physAddr = cpu_to_le32(dma_addr);
|
|
rxb->skb = skb;
|
|
rxb->dma_addr = dma_addr;
|
|
|
|
/* Tell the card about it */
|
|
wmb();
|
|
indexes->rxBuffReady = cpu_to_le32(ring->lastWrite);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
typhoon_rx(struct typhoon *tp, struct basic_ring *rxRing, volatile u32 * ready,
|
|
volatile u32 * cleared, int budget)
|
|
{
|
|
struct rx_desc *rx;
|
|
struct sk_buff *skb, *new_skb;
|
|
struct rxbuff_ent *rxb;
|
|
dma_addr_t dma_addr;
|
|
u32 local_ready;
|
|
u32 rxaddr;
|
|
int pkt_len;
|
|
u32 idx;
|
|
u32 csum_bits;
|
|
int received;
|
|
|
|
received = 0;
|
|
local_ready = le32_to_cpu(*ready);
|
|
rxaddr = le32_to_cpu(*cleared);
|
|
while(rxaddr != local_ready && budget > 0) {
|
|
rx = (struct rx_desc *) (rxRing->ringBase + rxaddr);
|
|
idx = rx->addr;
|
|
rxb = &tp->rxbuffers[idx];
|
|
skb = rxb->skb;
|
|
dma_addr = rxb->dma_addr;
|
|
|
|
typhoon_inc_rx_index(&rxaddr, 1);
|
|
|
|
if(rx->flags & TYPHOON_RX_ERROR) {
|
|
typhoon_recycle_rx_skb(tp, idx);
|
|
continue;
|
|
}
|
|
|
|
pkt_len = le16_to_cpu(rx->frameLen);
|
|
|
|
if(pkt_len < rx_copybreak &&
|
|
(new_skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
|
|
skb_reserve(new_skb, 2);
|
|
pci_dma_sync_single_for_cpu(tp->pdev, dma_addr,
|
|
PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_copy_to_linear_data(new_skb, skb->data, pkt_len);
|
|
pci_dma_sync_single_for_device(tp->pdev, dma_addr,
|
|
PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
skb_put(new_skb, pkt_len);
|
|
typhoon_recycle_rx_skb(tp, idx);
|
|
} else {
|
|
new_skb = skb;
|
|
skb_put(new_skb, pkt_len);
|
|
pci_unmap_single(tp->pdev, dma_addr, PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
typhoon_alloc_rx_skb(tp, idx);
|
|
}
|
|
new_skb->protocol = eth_type_trans(new_skb, tp->dev);
|
|
csum_bits = rx->rxStatus & (TYPHOON_RX_IP_CHK_GOOD |
|
|
TYPHOON_RX_UDP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD);
|
|
if(csum_bits ==
|
|
(TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_TCP_CHK_GOOD)
|
|
|| csum_bits ==
|
|
(TYPHOON_RX_IP_CHK_GOOD | TYPHOON_RX_UDP_CHK_GOOD)) {
|
|
new_skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
} else
|
|
new_skb->ip_summed = CHECKSUM_NONE;
|
|
|
|
spin_lock(&tp->state_lock);
|
|
if(tp->vlgrp != NULL && rx->rxStatus & TYPHOON_RX_VLAN)
|
|
vlan_hwaccel_receive_skb(new_skb, tp->vlgrp,
|
|
ntohl(rx->vlanTag) & 0xffff);
|
|
else
|
|
netif_receive_skb(new_skb);
|
|
spin_unlock(&tp->state_lock);
|
|
|
|
tp->dev->last_rx = jiffies;
|
|
received++;
|
|
budget--;
|
|
}
|
|
*cleared = cpu_to_le32(rxaddr);
|
|
|
|
return received;
|
|
}
|
|
|
|
static void
|
|
typhoon_fill_free_ring(struct typhoon *tp)
|
|
{
|
|
u32 i;
|
|
|
|
for(i = 0; i < RXENT_ENTRIES; i++) {
|
|
struct rxbuff_ent *rxb = &tp->rxbuffers[i];
|
|
if(rxb->skb)
|
|
continue;
|
|
if(typhoon_alloc_rx_skb(tp, i) < 0)
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
typhoon_poll(struct net_device *dev, int *total_budget)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
int orig_budget = *total_budget;
|
|
int budget, work_done, done;
|
|
|
|
rmb();
|
|
if(!tp->awaiting_resp && indexes->respReady != indexes->respCleared)
|
|
typhoon_process_response(tp, 0, NULL);
|
|
|
|
if(le32_to_cpu(indexes->txLoCleared) != tp->txLoRing.lastRead)
|
|
typhoon_tx_complete(tp, &tp->txLoRing, &indexes->txLoCleared);
|
|
|
|
if(orig_budget > dev->quota)
|
|
orig_budget = dev->quota;
|
|
|
|
budget = orig_budget;
|
|
work_done = 0;
|
|
done = 1;
|
|
|
|
if(indexes->rxHiCleared != indexes->rxHiReady) {
|
|
work_done = typhoon_rx(tp, &tp->rxHiRing, &indexes->rxHiReady,
|
|
&indexes->rxHiCleared, budget);
|
|
budget -= work_done;
|
|
}
|
|
|
|
if(indexes->rxLoCleared != indexes->rxLoReady) {
|
|
work_done += typhoon_rx(tp, &tp->rxLoRing, &indexes->rxLoReady,
|
|
&indexes->rxLoCleared, budget);
|
|
}
|
|
|
|
if(work_done) {
|
|
*total_budget -= work_done;
|
|
dev->quota -= work_done;
|
|
|
|
if(work_done >= orig_budget)
|
|
done = 0;
|
|
}
|
|
|
|
if(le32_to_cpu(indexes->rxBuffCleared) == tp->rxBuffRing.lastWrite) {
|
|
/* rxBuff ring is empty, try to fill it. */
|
|
typhoon_fill_free_ring(tp);
|
|
}
|
|
|
|
if(done) {
|
|
netif_rx_complete(dev);
|
|
iowrite32(TYPHOON_INTR_NONE,
|
|
tp->ioaddr + TYPHOON_REG_INTR_MASK);
|
|
typhoon_post_pci_writes(tp->ioaddr);
|
|
}
|
|
|
|
return (done ? 0 : 1);
|
|
}
|
|
|
|
static irqreturn_t
|
|
typhoon_interrupt(int irq, void *dev_instance)
|
|
{
|
|
struct net_device *dev = (struct net_device *) dev_instance;
|
|
struct typhoon *tp = dev->priv;
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
u32 intr_status;
|
|
|
|
intr_status = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
if(!(intr_status & TYPHOON_INTR_HOST_INT))
|
|
return IRQ_NONE;
|
|
|
|
iowrite32(intr_status, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
|
|
if(netif_rx_schedule_prep(dev)) {
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
__netif_rx_schedule(dev);
|
|
} else {
|
|
printk(KERN_ERR "%s: Error, poll already scheduled\n",
|
|
dev->name);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void
|
|
typhoon_free_rx_rings(struct typhoon *tp)
|
|
{
|
|
u32 i;
|
|
|
|
for(i = 0; i < RXENT_ENTRIES; i++) {
|
|
struct rxbuff_ent *rxb = &tp->rxbuffers[i];
|
|
if(rxb->skb) {
|
|
pci_unmap_single(tp->pdev, rxb->dma_addr, PKT_BUF_SZ,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(rxb->skb);
|
|
rxb->skb = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
typhoon_sleep(struct typhoon *tp, pci_power_t state, u16 events)
|
|
{
|
|
struct pci_dev *pdev = tp->pdev;
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
struct cmd_desc xp_cmd;
|
|
int err;
|
|
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_ENABLE_WAKE_EVENTS);
|
|
xp_cmd.parm1 = events;
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0) {
|
|
printk(KERN_ERR "%s: typhoon_sleep(): wake events cmd err %d\n",
|
|
tp->name, err);
|
|
return err;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_GOTO_SLEEP);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0) {
|
|
printk(KERN_ERR "%s: typhoon_sleep(): sleep cmd err %d\n",
|
|
tp->name, err);
|
|
return err;
|
|
}
|
|
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_SLEEPING) < 0)
|
|
return -ETIMEDOUT;
|
|
|
|
/* Since we cannot monitor the status of the link while sleeping,
|
|
* tell the world it went away.
|
|
*/
|
|
netif_carrier_off(tp->dev);
|
|
|
|
pci_enable_wake(tp->pdev, state, 1);
|
|
pci_disable_device(pdev);
|
|
return pci_set_power_state(pdev, state);
|
|
}
|
|
|
|
static int
|
|
typhoon_wakeup(struct typhoon *tp, int wait_type)
|
|
{
|
|
struct pci_dev *pdev = tp->pdev;
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
|
|
/* Post 2.x.x versions of the Sleep Image require a reset before
|
|
* we can download the Runtime Image. But let's not make users of
|
|
* the old firmware pay for the reset.
|
|
*/
|
|
iowrite32(TYPHOON_BOOTCMD_WAKEUP, ioaddr + TYPHOON_REG_COMMAND);
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_WAITING_FOR_HOST) < 0 ||
|
|
(tp->capabilities & TYPHOON_WAKEUP_NEEDS_RESET))
|
|
return typhoon_reset(ioaddr, wait_type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
typhoon_start_runtime(struct typhoon *tp)
|
|
{
|
|
struct net_device *dev = tp->dev;
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
struct cmd_desc xp_cmd;
|
|
int err;
|
|
|
|
typhoon_init_rings(tp);
|
|
typhoon_fill_free_ring(tp);
|
|
|
|
err = typhoon_download_firmware(tp);
|
|
if(err < 0) {
|
|
printk("%s: cannot load runtime on 3XP\n", tp->name);
|
|
goto error_out;
|
|
}
|
|
|
|
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_BOOT) < 0) {
|
|
printk("%s: cannot boot 3XP\n", tp->name);
|
|
err = -EIO;
|
|
goto error_out;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAX_PKT_SIZE);
|
|
xp_cmd.parm1 = cpu_to_le16(PKT_BUF_SZ);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS);
|
|
xp_cmd.parm1 = cpu_to_le16(ntohs(*(u16 *)&dev->dev_addr[0]));
|
|
xp_cmd.parm2 = cpu_to_le32(ntohl(*(u32 *)&dev->dev_addr[2]));
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
/* Disable IRQ coalescing -- we can reenable it when 3Com gives
|
|
* us some more information on how to control it.
|
|
*/
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_IRQ_COALESCE_CTRL);
|
|
xp_cmd.parm1 = 0;
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_XCVR_SELECT);
|
|
xp_cmd.parm1 = tp->xcvr_select;
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_VLAN_TYPE_WRITE);
|
|
xp_cmd.parm1 = __constant_cpu_to_le16(ETH_P_8021Q);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_OFFLOAD_TASKS);
|
|
spin_lock_bh(&tp->state_lock);
|
|
xp_cmd.parm2 = tp->offload;
|
|
xp_cmd.parm3 = tp->offload;
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
spin_unlock_bh(&tp->state_lock);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
typhoon_set_rx_mode(dev);
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_ENABLE);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_ENABLE);
|
|
err = typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
if(err < 0)
|
|
goto error_out;
|
|
|
|
tp->card_state = Running;
|
|
smp_wmb();
|
|
|
|
iowrite32(TYPHOON_INTR_ENABLE_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
typhoon_post_pci_writes(ioaddr);
|
|
|
|
return 0;
|
|
|
|
error_out:
|
|
typhoon_reset(ioaddr, WaitNoSleep);
|
|
typhoon_free_rx_rings(tp);
|
|
typhoon_init_rings(tp);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
typhoon_stop_runtime(struct typhoon *tp, int wait_type)
|
|
{
|
|
struct typhoon_indexes *indexes = tp->indexes;
|
|
struct transmit_ring *txLo = &tp->txLoRing;
|
|
void __iomem *ioaddr = tp->ioaddr;
|
|
struct cmd_desc xp_cmd;
|
|
int i;
|
|
|
|
/* Disable interrupts early, since we can't schedule a poll
|
|
* when called with !netif_running(). This will be posted
|
|
* when we force the posting of the command.
|
|
*/
|
|
iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_RX_DISABLE);
|
|
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
|
|
/* Wait 1/2 sec for any outstanding transmits to occur
|
|
* We'll cleanup after the reset if this times out.
|
|
*/
|
|
for(i = 0; i < TYPHOON_WAIT_TIMEOUT; i++) {
|
|
if(indexes->txLoCleared == cpu_to_le32(txLo->lastWrite))
|
|
break;
|
|
udelay(TYPHOON_UDELAY);
|
|
}
|
|
|
|
if(i == TYPHOON_WAIT_TIMEOUT)
|
|
printk(KERN_ERR
|
|
"%s: halt timed out waiting for Tx to complete\n",
|
|
tp->name);
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_TX_DISABLE);
|
|
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
|
|
/* save the statistics so when we bring the interface up again,
|
|
* the values reported to userspace are correct.
|
|
*/
|
|
tp->card_state = Sleeping;
|
|
smp_wmb();
|
|
typhoon_do_get_stats(tp);
|
|
memcpy(&tp->stats_saved, &tp->stats, sizeof(struct net_device_stats));
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_HALT);
|
|
typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL);
|
|
|
|
if(typhoon_wait_status(ioaddr, TYPHOON_STATUS_HALTED) < 0)
|
|
printk(KERN_ERR "%s: timed out waiting for 3XP to halt\n",
|
|
tp->name);
|
|
|
|
if(typhoon_reset(ioaddr, wait_type) < 0) {
|
|
printk(KERN_ERR "%s: unable to reset 3XP\n", tp->name);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/* cleanup any outstanding Tx packets */
|
|
if(indexes->txLoCleared != cpu_to_le32(txLo->lastWrite)) {
|
|
indexes->txLoCleared = cpu_to_le32(txLo->lastWrite);
|
|
typhoon_clean_tx(tp, &tp->txLoRing, &indexes->txLoCleared);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
typhoon_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
if(typhoon_reset(tp->ioaddr, WaitNoSleep) < 0) {
|
|
printk(KERN_WARNING "%s: could not reset in tx timeout\n",
|
|
dev->name);
|
|
goto truely_dead;
|
|
}
|
|
|
|
/* If we ever start using the Hi ring, it will need cleaning too */
|
|
typhoon_clean_tx(tp, &tp->txLoRing, &tp->indexes->txLoCleared);
|
|
typhoon_free_rx_rings(tp);
|
|
|
|
if(typhoon_start_runtime(tp) < 0) {
|
|
printk(KERN_ERR "%s: could not start runtime in tx timeout\n",
|
|
dev->name);
|
|
goto truely_dead;
|
|
}
|
|
|
|
netif_wake_queue(dev);
|
|
return;
|
|
|
|
truely_dead:
|
|
/* Reset the hardware, and turn off carrier to avoid more timeouts */
|
|
typhoon_reset(tp->ioaddr, NoWait);
|
|
netif_carrier_off(dev);
|
|
}
|
|
|
|
static int
|
|
typhoon_open(struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
int err;
|
|
|
|
err = typhoon_wakeup(tp, WaitSleep);
|
|
if(err < 0) {
|
|
printk(KERN_ERR "%s: unable to wakeup device\n", dev->name);
|
|
goto out_sleep;
|
|
}
|
|
|
|
err = request_irq(dev->irq, &typhoon_interrupt, IRQF_SHARED,
|
|
dev->name, dev);
|
|
if(err < 0)
|
|
goto out_sleep;
|
|
|
|
err = typhoon_start_runtime(tp);
|
|
if(err < 0)
|
|
goto out_irq;
|
|
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
|
|
out_irq:
|
|
free_irq(dev->irq, dev);
|
|
|
|
out_sleep:
|
|
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
|
|
printk(KERN_ERR "%s: unable to reboot into sleep img\n",
|
|
dev->name);
|
|
typhoon_reset(tp->ioaddr, NoWait);
|
|
goto out;
|
|
}
|
|
|
|
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
|
|
printk(KERN_ERR "%s: unable to go back to sleep\n", dev->name);
|
|
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
typhoon_close(struct net_device *dev)
|
|
{
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if(typhoon_stop_runtime(tp, WaitSleep) < 0)
|
|
printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
|
|
|
|
/* Make sure there is no irq handler running on a different CPU. */
|
|
typhoon_synchronize_irq(dev->irq);
|
|
free_irq(dev->irq, dev);
|
|
|
|
typhoon_free_rx_rings(tp);
|
|
typhoon_init_rings(tp);
|
|
|
|
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0)
|
|
printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
|
|
|
|
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0)
|
|
printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int
|
|
typhoon_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
/* If we're down, resume when we are upped.
|
|
*/
|
|
if(!netif_running(dev))
|
|
return 0;
|
|
|
|
if(typhoon_wakeup(tp, WaitNoSleep) < 0) {
|
|
printk(KERN_ERR "%s: critical: could not wake up in resume\n",
|
|
dev->name);
|
|
goto reset;
|
|
}
|
|
|
|
if(typhoon_start_runtime(tp) < 0) {
|
|
printk(KERN_ERR "%s: critical: could not start runtime in "
|
|
"resume\n", dev->name);
|
|
goto reset;
|
|
}
|
|
|
|
netif_device_attach(dev);
|
|
netif_start_queue(dev);
|
|
return 0;
|
|
|
|
reset:
|
|
typhoon_reset(tp->ioaddr, NoWait);
|
|
return -EBUSY;
|
|
}
|
|
|
|
static int
|
|
typhoon_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
struct cmd_desc xp_cmd;
|
|
|
|
/* If we're down, we're already suspended.
|
|
*/
|
|
if(!netif_running(dev))
|
|
return 0;
|
|
|
|
spin_lock_bh(&tp->state_lock);
|
|
if(tp->vlgrp && tp->wol_events & TYPHOON_WAKE_MAGIC_PKT) {
|
|
spin_unlock_bh(&tp->state_lock);
|
|
printk(KERN_ERR "%s: cannot do WAKE_MAGIC with VLANS\n",
|
|
dev->name);
|
|
return -EBUSY;
|
|
}
|
|
spin_unlock_bh(&tp->state_lock);
|
|
|
|
netif_device_detach(dev);
|
|
|
|
if(typhoon_stop_runtime(tp, WaitNoSleep) < 0) {
|
|
printk(KERN_ERR "%s: unable to stop runtime\n", dev->name);
|
|
goto need_resume;
|
|
}
|
|
|
|
typhoon_free_rx_rings(tp);
|
|
typhoon_init_rings(tp);
|
|
|
|
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
|
|
printk(KERN_ERR "%s: unable to boot sleep image\n", dev->name);
|
|
goto need_resume;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_MAC_ADDRESS);
|
|
xp_cmd.parm1 = cpu_to_le16(ntohs(*(u16 *)&dev->dev_addr[0]));
|
|
xp_cmd.parm2 = cpu_to_le32(ntohl(*(u32 *)&dev->dev_addr[2]));
|
|
if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
|
|
printk(KERN_ERR "%s: unable to set mac address in suspend\n",
|
|
dev->name);
|
|
goto need_resume;
|
|
}
|
|
|
|
INIT_COMMAND_NO_RESPONSE(&xp_cmd, TYPHOON_CMD_SET_RX_FILTER);
|
|
xp_cmd.parm1 = TYPHOON_RX_FILTER_DIRECTED | TYPHOON_RX_FILTER_BROADCAST;
|
|
if(typhoon_issue_command(tp, 1, &xp_cmd, 0, NULL) < 0) {
|
|
printk(KERN_ERR "%s: unable to set rx filter in suspend\n",
|
|
dev->name);
|
|
goto need_resume;
|
|
}
|
|
|
|
if(typhoon_sleep(tp, pci_choose_state(pdev, state), tp->wol_events) < 0) {
|
|
printk(KERN_ERR "%s: unable to put card to sleep\n", dev->name);
|
|
goto need_resume;
|
|
}
|
|
|
|
return 0;
|
|
|
|
need_resume:
|
|
typhoon_resume(pdev);
|
|
return -EBUSY;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit
|
|
typhoon_test_mmio(struct pci_dev *pdev)
|
|
{
|
|
void __iomem *ioaddr = pci_iomap(pdev, 1, 128);
|
|
int mode = 0;
|
|
u32 val;
|
|
|
|
if(!ioaddr)
|
|
goto out;
|
|
|
|
if(ioread32(ioaddr + TYPHOON_REG_STATUS) !=
|
|
TYPHOON_STATUS_WAITING_FOR_HOST)
|
|
goto out_unmap;
|
|
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
|
|
/* Ok, see if we can change our interrupt status register by
|
|
* sending ourselves an interrupt. If so, then MMIO works.
|
|
* The 50usec delay is arbitrary -- it could probably be smaller.
|
|
*/
|
|
val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
if((val & TYPHOON_INTR_SELF) == 0) {
|
|
iowrite32(1, ioaddr + TYPHOON_REG_SELF_INTERRUPT);
|
|
ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
udelay(50);
|
|
val = ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
if(val & TYPHOON_INTR_SELF)
|
|
mode = 1;
|
|
}
|
|
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_MASK);
|
|
iowrite32(TYPHOON_INTR_ALL, ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
iowrite32(TYPHOON_INTR_NONE, ioaddr + TYPHOON_REG_INTR_ENABLE);
|
|
ioread32(ioaddr + TYPHOON_REG_INTR_STATUS);
|
|
|
|
out_unmap:
|
|
pci_iounmap(pdev, ioaddr);
|
|
|
|
out:
|
|
if(!mode)
|
|
printk(KERN_INFO PFX "falling back to port IO\n");
|
|
return mode;
|
|
}
|
|
|
|
static int __devinit
|
|
typhoon_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
|
|
{
|
|
static int did_version = 0;
|
|
struct net_device *dev;
|
|
struct typhoon *tp;
|
|
int card_id = (int) ent->driver_data;
|
|
void __iomem *ioaddr;
|
|
void *shared;
|
|
dma_addr_t shared_dma;
|
|
struct cmd_desc xp_cmd;
|
|
struct resp_desc xp_resp[3];
|
|
int i;
|
|
int err = 0;
|
|
|
|
if(!did_version++)
|
|
printk(KERN_INFO "%s", version);
|
|
|
|
dev = alloc_etherdev(sizeof(*tp));
|
|
if(dev == NULL) {
|
|
printk(ERR_PFX "%s: unable to alloc new net device\n",
|
|
pci_name(pdev));
|
|
err = -ENOMEM;
|
|
goto error_out;
|
|
}
|
|
SET_MODULE_OWNER(dev);
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
err = pci_enable_device(pdev);
|
|
if(err < 0) {
|
|
printk(ERR_PFX "%s: unable to enable device\n",
|
|
pci_name(pdev));
|
|
goto error_out_dev;
|
|
}
|
|
|
|
err = pci_set_mwi(pdev);
|
|
if(err < 0) {
|
|
printk(ERR_PFX "%s: unable to set MWI\n", pci_name(pdev));
|
|
goto error_out_disable;
|
|
}
|
|
|
|
err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
|
|
if(err < 0) {
|
|
printk(ERR_PFX "%s: No usable DMA configuration\n",
|
|
pci_name(pdev));
|
|
goto error_out_mwi;
|
|
}
|
|
|
|
/* sanity checks on IO and MMIO BARs
|
|
*/
|
|
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_IO)) {
|
|
printk(ERR_PFX
|
|
"%s: region #1 not a PCI IO resource, aborting\n",
|
|
pci_name(pdev));
|
|
err = -ENODEV;
|
|
goto error_out_mwi;
|
|
}
|
|
if(pci_resource_len(pdev, 0) < 128) {
|
|
printk(ERR_PFX "%s: Invalid PCI IO region size, aborting\n",
|
|
pci_name(pdev));
|
|
err = -ENODEV;
|
|
goto error_out_mwi;
|
|
}
|
|
if(!(pci_resource_flags(pdev, 1) & IORESOURCE_MEM)) {
|
|
printk(ERR_PFX
|
|
"%s: region #1 not a PCI MMIO resource, aborting\n",
|
|
pci_name(pdev));
|
|
err = -ENODEV;
|
|
goto error_out_mwi;
|
|
}
|
|
if(pci_resource_len(pdev, 1) < 128) {
|
|
printk(ERR_PFX "%s: Invalid PCI MMIO region size, aborting\n",
|
|
pci_name(pdev));
|
|
err = -ENODEV;
|
|
goto error_out_mwi;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, "typhoon");
|
|
if(err < 0) {
|
|
printk(ERR_PFX "%s: could not request regions\n",
|
|
pci_name(pdev));
|
|
goto error_out_mwi;
|
|
}
|
|
|
|
/* map our registers
|
|
*/
|
|
if(use_mmio != 0 && use_mmio != 1)
|
|
use_mmio = typhoon_test_mmio(pdev);
|
|
|
|
ioaddr = pci_iomap(pdev, use_mmio, 128);
|
|
if (!ioaddr) {
|
|
printk(ERR_PFX "%s: cannot remap registers, aborting\n",
|
|
pci_name(pdev));
|
|
err = -EIO;
|
|
goto error_out_regions;
|
|
}
|
|
|
|
/* allocate pci dma space for rx and tx descriptor rings
|
|
*/
|
|
shared = pci_alloc_consistent(pdev, sizeof(struct typhoon_shared),
|
|
&shared_dma);
|
|
if(!shared) {
|
|
printk(ERR_PFX "%s: could not allocate DMA memory\n",
|
|
pci_name(pdev));
|
|
err = -ENOMEM;
|
|
goto error_out_remap;
|
|
}
|
|
|
|
dev->irq = pdev->irq;
|
|
tp = netdev_priv(dev);
|
|
tp->shared = (struct typhoon_shared *) shared;
|
|
tp->shared_dma = shared_dma;
|
|
tp->pdev = pdev;
|
|
tp->tx_pdev = pdev;
|
|
tp->ioaddr = ioaddr;
|
|
tp->tx_ioaddr = ioaddr;
|
|
tp->dev = dev;
|
|
|
|
/* Init sequence:
|
|
* 1) Reset the adapter to clear any bad juju
|
|
* 2) Reload the sleep image
|
|
* 3) Boot the sleep image
|
|
* 4) Get the hardware address.
|
|
* 5) Put the card to sleep.
|
|
*/
|
|
if (typhoon_reset(ioaddr, WaitSleep) < 0) {
|
|
printk(ERR_PFX "%s: could not reset 3XP\n", pci_name(pdev));
|
|
err = -EIO;
|
|
goto error_out_dma;
|
|
}
|
|
|
|
/* Now that we've reset the 3XP and are sure it's not going to
|
|
* write all over memory, enable bus mastering, and save our
|
|
* state for resuming after a suspend.
|
|
*/
|
|
pci_set_master(pdev);
|
|
pci_save_state(pdev);
|
|
|
|
/* dev->name is not valid until we register, but we need to
|
|
* use some common routines to initialize the card. So that those
|
|
* routines print the right name, we keep our oun pointer to the name
|
|
*/
|
|
tp->name = pci_name(pdev);
|
|
|
|
typhoon_init_interface(tp);
|
|
typhoon_init_rings(tp);
|
|
|
|
if(typhoon_boot_3XP(tp, TYPHOON_STATUS_WAITING_FOR_HOST) < 0) {
|
|
printk(ERR_PFX "%s: cannot boot 3XP sleep image\n",
|
|
pci_name(pdev));
|
|
err = -EIO;
|
|
goto error_out_reset;
|
|
}
|
|
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_MAC_ADDRESS);
|
|
if(typhoon_issue_command(tp, 1, &xp_cmd, 1, xp_resp) < 0) {
|
|
printk(ERR_PFX "%s: cannot read MAC address\n",
|
|
pci_name(pdev));
|
|
err = -EIO;
|
|
goto error_out_reset;
|
|
}
|
|
|
|
*(u16 *)&dev->dev_addr[0] = htons(le16_to_cpu(xp_resp[0].parm1));
|
|
*(u32 *)&dev->dev_addr[2] = htonl(le32_to_cpu(xp_resp[0].parm2));
|
|
|
|
if(!is_valid_ether_addr(dev->dev_addr)) {
|
|
printk(ERR_PFX "%s: Could not obtain valid ethernet address, "
|
|
"aborting\n", pci_name(pdev));
|
|
goto error_out_reset;
|
|
}
|
|
|
|
/* Read the Sleep Image version last, so the response is valid
|
|
* later when we print out the version reported.
|
|
*/
|
|
INIT_COMMAND_WITH_RESPONSE(&xp_cmd, TYPHOON_CMD_READ_VERSIONS);
|
|
if(typhoon_issue_command(tp, 1, &xp_cmd, 3, xp_resp) < 0) {
|
|
printk(ERR_PFX "%s: Could not get Sleep Image version\n",
|
|
pci_name(pdev));
|
|
goto error_out_reset;
|
|
}
|
|
|
|
tp->capabilities = typhoon_card_info[card_id].capabilities;
|
|
tp->xcvr_select = TYPHOON_XCVR_AUTONEG;
|
|
|
|
/* Typhoon 1.0 Sleep Images return one response descriptor to the
|
|
* READ_VERSIONS command. Those versions are OK after waking up
|
|
* from sleep without needing a reset. Typhoon 1.1+ Sleep Images
|
|
* seem to need a little extra help to get started. Since we don't
|
|
* know how to nudge it along, just kick it.
|
|
*/
|
|
if(xp_resp[0].numDesc != 0)
|
|
tp->capabilities |= TYPHOON_WAKEUP_NEEDS_RESET;
|
|
|
|
if(typhoon_sleep(tp, PCI_D3hot, 0) < 0) {
|
|
printk(ERR_PFX "%s: cannot put adapter to sleep\n",
|
|
pci_name(pdev));
|
|
err = -EIO;
|
|
goto error_out_reset;
|
|
}
|
|
|
|
/* The chip-specific entries in the device structure. */
|
|
dev->open = typhoon_open;
|
|
dev->hard_start_xmit = typhoon_start_tx;
|
|
dev->stop = typhoon_close;
|
|
dev->set_multicast_list = typhoon_set_rx_mode;
|
|
dev->tx_timeout = typhoon_tx_timeout;
|
|
dev->poll = typhoon_poll;
|
|
dev->weight = 16;
|
|
dev->watchdog_timeo = TX_TIMEOUT;
|
|
dev->get_stats = typhoon_get_stats;
|
|
dev->set_mac_address = typhoon_set_mac_address;
|
|
dev->vlan_rx_register = typhoon_vlan_rx_register;
|
|
|
|
SET_ETHTOOL_OPS(dev, &typhoon_ethtool_ops);
|
|
|
|
/* We can handle scatter gather, up to 16 entries, and
|
|
* we can do IP checksumming (only version 4, doh...)
|
|
*/
|
|
dev->features |= NETIF_F_SG | NETIF_F_IP_CSUM;
|
|
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_RX;
|
|
dev->features |= NETIF_F_TSO;
|
|
|
|
if(register_netdev(dev) < 0)
|
|
goto error_out_reset;
|
|
|
|
/* fixup our local name */
|
|
tp->name = dev->name;
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
printk(KERN_INFO "%s: %s at %s 0x%llx, ",
|
|
dev->name, typhoon_card_info[card_id].name,
|
|
use_mmio ? "MMIO" : "IO",
|
|
(unsigned long long)pci_resource_start(pdev, use_mmio));
|
|
for(i = 0; i < 5; i++)
|
|
printk("%2.2x:", dev->dev_addr[i]);
|
|
printk("%2.2x\n", dev->dev_addr[i]);
|
|
|
|
/* xp_resp still contains the response to the READ_VERSIONS command.
|
|
* For debugging, let the user know what version he has.
|
|
*/
|
|
if(xp_resp[0].numDesc == 0) {
|
|
/* This is the Typhoon 1.0 type Sleep Image, last 16 bits
|
|
* of version is Month/Day of build.
|
|
*/
|
|
u16 monthday = le32_to_cpu(xp_resp[0].parm2) & 0xffff;
|
|
printk(KERN_INFO "%s: Typhoon 1.0 Sleep Image built "
|
|
"%02u/%02u/2000\n", dev->name, monthday >> 8,
|
|
monthday & 0xff);
|
|
} else if(xp_resp[0].numDesc == 2) {
|
|
/* This is the Typhoon 1.1+ type Sleep Image
|
|
*/
|
|
u32 sleep_ver = le32_to_cpu(xp_resp[0].parm2);
|
|
u8 *ver_string = (u8 *) &xp_resp[1];
|
|
ver_string[25] = 0;
|
|
printk(KERN_INFO "%s: Typhoon 1.1+ Sleep Image version "
|
|
"%02x.%03x.%03x %s\n", dev->name, sleep_ver >> 24,
|
|
(sleep_ver >> 12) & 0xfff, sleep_ver & 0xfff,
|
|
ver_string);
|
|
} else {
|
|
printk(KERN_WARNING "%s: Unknown Sleep Image version "
|
|
"(%u:%04x)\n", dev->name, xp_resp[0].numDesc,
|
|
le32_to_cpu(xp_resp[0].parm2));
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_out_reset:
|
|
typhoon_reset(ioaddr, NoWait);
|
|
|
|
error_out_dma:
|
|
pci_free_consistent(pdev, sizeof(struct typhoon_shared),
|
|
shared, shared_dma);
|
|
error_out_remap:
|
|
pci_iounmap(pdev, ioaddr);
|
|
error_out_regions:
|
|
pci_release_regions(pdev);
|
|
error_out_mwi:
|
|
pci_clear_mwi(pdev);
|
|
error_out_disable:
|
|
pci_disable_device(pdev);
|
|
error_out_dev:
|
|
free_netdev(dev);
|
|
error_out:
|
|
return err;
|
|
}
|
|
|
|
static void __devexit
|
|
typhoon_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct typhoon *tp = netdev_priv(dev);
|
|
|
|
unregister_netdev(dev);
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
pci_restore_state(pdev);
|
|
typhoon_reset(tp->ioaddr, NoWait);
|
|
pci_iounmap(pdev, tp->ioaddr);
|
|
pci_free_consistent(pdev, sizeof(struct typhoon_shared),
|
|
tp->shared, tp->shared_dma);
|
|
pci_release_regions(pdev);
|
|
pci_clear_mwi(pdev);
|
|
pci_disable_device(pdev);
|
|
pci_set_drvdata(pdev, NULL);
|
|
free_netdev(dev);
|
|
}
|
|
|
|
static struct pci_driver typhoon_driver = {
|
|
.name = DRV_MODULE_NAME,
|
|
.id_table = typhoon_pci_tbl,
|
|
.probe = typhoon_init_one,
|
|
.remove = __devexit_p(typhoon_remove_one),
|
|
#ifdef CONFIG_PM
|
|
.suspend = typhoon_suspend,
|
|
.resume = typhoon_resume,
|
|
#endif
|
|
};
|
|
|
|
static int __init
|
|
typhoon_init(void)
|
|
{
|
|
return pci_register_driver(&typhoon_driver);
|
|
}
|
|
|
|
static void __exit
|
|
typhoon_cleanup(void)
|
|
{
|
|
pci_unregister_driver(&typhoon_driver);
|
|
}
|
|
|
|
module_init(typhoon_init);
|
|
module_exit(typhoon_cleanup);
|