mirror of
https://github.com/torvalds/linux.git
synced 2024-11-14 08:02:07 +00:00
b9acb64a38
Check for ACPI resource conflicts in hwmon drivers. I've included all Super-I/O and PCI drivers. I've voluntarily left out: * Vendor-specific drivers: if they conflicted on any system, this would pretty much mean that they conflict on all systems, and we would know by now. * Legacy ISA drivers (lm78 and w83781d): they only support chips found on old designs were ACPI either wasn't supported or didn't deal with thermal management. * Drivers accessing the I/O resources indirectly (e.g. through SMBus): the checks are already done where they belong, i.e. in the bus drivers. Signed-off-by: Jean Delvare <jdelvare@suse.de> Acked-by: David Hubbard <david.c.hubbard@gmail.com>
1588 lines
48 KiB
C
1588 lines
48 KiB
C
/*
|
|
* f71805f.c - driver for the Fintek F71805F/FG and F71872F/FG Super-I/O
|
|
* chips integrated hardware monitoring features
|
|
* Copyright (C) 2005-2006 Jean Delvare <khali@linux-fr.org>
|
|
*
|
|
* The F71805F/FG is a LPC Super-I/O chip made by Fintek. It integrates
|
|
* complete hardware monitoring features: voltage, fan and temperature
|
|
* sensors, and manual and automatic fan speed control.
|
|
*
|
|
* The F71872F/FG is almost the same, with two more voltages monitored,
|
|
* and 6 VID inputs.
|
|
*
|
|
* The F71806F/FG is essentially the same as the F71872F/FG. It even has
|
|
* the same chip ID, so the driver can't differentiate between.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/hwmon-sysfs.h>
|
|
#include <linux/err.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/acpi.h>
|
|
#include <asm/io.h>
|
|
|
|
static unsigned short force_id;
|
|
module_param(force_id, ushort, 0);
|
|
MODULE_PARM_DESC(force_id, "Override the detected device ID");
|
|
|
|
static struct platform_device *pdev;
|
|
|
|
#define DRVNAME "f71805f"
|
|
enum kinds { f71805f, f71872f };
|
|
|
|
/*
|
|
* Super-I/O constants and functions
|
|
*/
|
|
|
|
#define F71805F_LD_HWM 0x04
|
|
|
|
#define SIO_REG_LDSEL 0x07 /* Logical device select */
|
|
#define SIO_REG_DEVID 0x20 /* Device ID (2 bytes) */
|
|
#define SIO_REG_DEVREV 0x22 /* Device revision */
|
|
#define SIO_REG_MANID 0x23 /* Fintek ID (2 bytes) */
|
|
#define SIO_REG_FNSEL1 0x29 /* Multi Function Select 1 (F71872F) */
|
|
#define SIO_REG_ENABLE 0x30 /* Logical device enable */
|
|
#define SIO_REG_ADDR 0x60 /* Logical device address (2 bytes) */
|
|
|
|
#define SIO_FINTEK_ID 0x1934
|
|
#define SIO_F71805F_ID 0x0406
|
|
#define SIO_F71872F_ID 0x0341
|
|
|
|
static inline int
|
|
superio_inb(int base, int reg)
|
|
{
|
|
outb(reg, base);
|
|
return inb(base + 1);
|
|
}
|
|
|
|
static int
|
|
superio_inw(int base, int reg)
|
|
{
|
|
int val;
|
|
outb(reg++, base);
|
|
val = inb(base + 1) << 8;
|
|
outb(reg, base);
|
|
val |= inb(base + 1);
|
|
return val;
|
|
}
|
|
|
|
static inline void
|
|
superio_select(int base, int ld)
|
|
{
|
|
outb(SIO_REG_LDSEL, base);
|
|
outb(ld, base + 1);
|
|
}
|
|
|
|
static inline void
|
|
superio_enter(int base)
|
|
{
|
|
outb(0x87, base);
|
|
outb(0x87, base);
|
|
}
|
|
|
|
static inline void
|
|
superio_exit(int base)
|
|
{
|
|
outb(0xaa, base);
|
|
}
|
|
|
|
/*
|
|
* ISA constants
|
|
*/
|
|
|
|
#define REGION_LENGTH 8
|
|
#define ADDR_REG_OFFSET 5
|
|
#define DATA_REG_OFFSET 6
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
|
|
/* in nr from 0 to 10 (8-bit values) */
|
|
#define F71805F_REG_IN(nr) (0x10 + (nr))
|
|
#define F71805F_REG_IN_HIGH(nr) ((nr) < 10 ? 0x40 + 2 * (nr) : 0x2E)
|
|
#define F71805F_REG_IN_LOW(nr) ((nr) < 10 ? 0x41 + 2 * (nr) : 0x2F)
|
|
/* fan nr from 0 to 2 (12-bit values, two registers) */
|
|
#define F71805F_REG_FAN(nr) (0x20 + 2 * (nr))
|
|
#define F71805F_REG_FAN_LOW(nr) (0x28 + 2 * (nr))
|
|
#define F71805F_REG_FAN_TARGET(nr) (0x69 + 16 * (nr))
|
|
#define F71805F_REG_FAN_CTRL(nr) (0x60 + 16 * (nr))
|
|
#define F71805F_REG_PWM_FREQ(nr) (0x63 + 16 * (nr))
|
|
#define F71805F_REG_PWM_DUTY(nr) (0x6B + 16 * (nr))
|
|
/* temp nr from 0 to 2 (8-bit values) */
|
|
#define F71805F_REG_TEMP(nr) (0x1B + (nr))
|
|
#define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr))
|
|
#define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr))
|
|
#define F71805F_REG_TEMP_MODE 0x01
|
|
/* pwm/fan pwmnr from 0 to 2, auto point apnr from 0 to 2 */
|
|
/* map Fintek numbers to our numbers as follows: 9->0, 5->1, 1->2 */
|
|
#define F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr) \
|
|
(0xA0 + 0x10 * (pwmnr) + (2 - (apnr)))
|
|
#define F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr) \
|
|
(0xA4 + 0x10 * (pwmnr) + \
|
|
2 * (2 - (apnr)))
|
|
|
|
#define F71805F_REG_START 0x00
|
|
/* status nr from 0 to 2 */
|
|
#define F71805F_REG_STATUS(nr) (0x36 + (nr))
|
|
|
|
/* individual register bits */
|
|
#define FAN_CTRL_DC_MODE 0x10
|
|
#define FAN_CTRL_LATCH_FULL 0x08
|
|
#define FAN_CTRL_MODE_MASK 0x03
|
|
#define FAN_CTRL_MODE_SPEED 0x00
|
|
#define FAN_CTRL_MODE_TEMPERATURE 0x01
|
|
#define FAN_CTRL_MODE_MANUAL 0x02
|
|
|
|
/*
|
|
* Data structures and manipulation thereof
|
|
*/
|
|
|
|
struct f71805f_auto_point {
|
|
u8 temp[3];
|
|
u16 fan[3];
|
|
};
|
|
|
|
struct f71805f_data {
|
|
unsigned short addr;
|
|
const char *name;
|
|
struct device *hwmon_dev;
|
|
|
|
struct mutex update_lock;
|
|
char valid; /* !=0 if following fields are valid */
|
|
unsigned long last_updated; /* In jiffies */
|
|
unsigned long last_limits; /* In jiffies */
|
|
|
|
/* Register values */
|
|
u8 in[11];
|
|
u8 in_high[11];
|
|
u8 in_low[11];
|
|
u16 has_in;
|
|
u16 fan[3];
|
|
u16 fan_low[3];
|
|
u16 fan_target[3];
|
|
u8 fan_ctrl[3];
|
|
u8 pwm[3];
|
|
u8 pwm_freq[3];
|
|
u8 temp[3];
|
|
u8 temp_high[3];
|
|
u8 temp_hyst[3];
|
|
u8 temp_mode;
|
|
unsigned long alarms;
|
|
struct f71805f_auto_point auto_points[3];
|
|
};
|
|
|
|
struct f71805f_sio_data {
|
|
enum kinds kind;
|
|
u8 fnsel1;
|
|
};
|
|
|
|
static inline long in_from_reg(u8 reg)
|
|
{
|
|
return (reg * 8);
|
|
}
|
|
|
|
/* The 2 least significant bits are not used */
|
|
static inline u8 in_to_reg(long val)
|
|
{
|
|
if (val <= 0)
|
|
return 0;
|
|
if (val >= 2016)
|
|
return 0xfc;
|
|
return (((val + 16) / 32) << 2);
|
|
}
|
|
|
|
/* in0 is downscaled by a factor 2 internally */
|
|
static inline long in0_from_reg(u8 reg)
|
|
{
|
|
return (reg * 16);
|
|
}
|
|
|
|
static inline u8 in0_to_reg(long val)
|
|
{
|
|
if (val <= 0)
|
|
return 0;
|
|
if (val >= 4032)
|
|
return 0xfc;
|
|
return (((val + 32) / 64) << 2);
|
|
}
|
|
|
|
/* The 4 most significant bits are not used */
|
|
static inline long fan_from_reg(u16 reg)
|
|
{
|
|
reg &= 0xfff;
|
|
if (!reg || reg == 0xfff)
|
|
return 0;
|
|
return (1500000 / reg);
|
|
}
|
|
|
|
static inline u16 fan_to_reg(long rpm)
|
|
{
|
|
/* If the low limit is set below what the chip can measure,
|
|
store the largest possible 12-bit value in the registers,
|
|
so that no alarm will ever trigger. */
|
|
if (rpm < 367)
|
|
return 0xfff;
|
|
return (1500000 / rpm);
|
|
}
|
|
|
|
static inline unsigned long pwm_freq_from_reg(u8 reg)
|
|
{
|
|
unsigned long clock = (reg & 0x80) ? 48000000UL : 1000000UL;
|
|
|
|
reg &= 0x7f;
|
|
if (reg == 0)
|
|
reg++;
|
|
return clock / (reg << 8);
|
|
}
|
|
|
|
static inline u8 pwm_freq_to_reg(unsigned long val)
|
|
{
|
|
if (val >= 187500) /* The highest we can do */
|
|
return 0x80;
|
|
if (val >= 1475) /* Use 48 MHz clock */
|
|
return 0x80 | (48000000UL / (val << 8));
|
|
if (val < 31) /* The lowest we can do */
|
|
return 0x7f;
|
|
else /* Use 1 MHz clock */
|
|
return 1000000UL / (val << 8);
|
|
}
|
|
|
|
static inline int pwm_mode_from_reg(u8 reg)
|
|
{
|
|
return !(reg & FAN_CTRL_DC_MODE);
|
|
}
|
|
|
|
static inline long temp_from_reg(u8 reg)
|
|
{
|
|
return (reg * 1000);
|
|
}
|
|
|
|
static inline u8 temp_to_reg(long val)
|
|
{
|
|
if (val < 0)
|
|
val = 0;
|
|
else if (val > 1000 * 0xff)
|
|
val = 0xff;
|
|
return ((val + 500) / 1000);
|
|
}
|
|
|
|
/*
|
|
* Device I/O access
|
|
*/
|
|
|
|
/* Must be called with data->update_lock held, except during initialization */
|
|
static u8 f71805f_read8(struct f71805f_data *data, u8 reg)
|
|
{
|
|
outb(reg, data->addr + ADDR_REG_OFFSET);
|
|
return inb(data->addr + DATA_REG_OFFSET);
|
|
}
|
|
|
|
/* Must be called with data->update_lock held, except during initialization */
|
|
static void f71805f_write8(struct f71805f_data *data, u8 reg, u8 val)
|
|
{
|
|
outb(reg, data->addr + ADDR_REG_OFFSET);
|
|
outb(val, data->addr + DATA_REG_OFFSET);
|
|
}
|
|
|
|
/* It is important to read the MSB first, because doing so latches the
|
|
value of the LSB, so we are sure both bytes belong to the same value.
|
|
Must be called with data->update_lock held, except during initialization */
|
|
static u16 f71805f_read16(struct f71805f_data *data, u8 reg)
|
|
{
|
|
u16 val;
|
|
|
|
outb(reg, data->addr + ADDR_REG_OFFSET);
|
|
val = inb(data->addr + DATA_REG_OFFSET) << 8;
|
|
outb(++reg, data->addr + ADDR_REG_OFFSET);
|
|
val |= inb(data->addr + DATA_REG_OFFSET);
|
|
|
|
return val;
|
|
}
|
|
|
|
/* Must be called with data->update_lock held, except during initialization */
|
|
static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val)
|
|
{
|
|
outb(reg, data->addr + ADDR_REG_OFFSET);
|
|
outb(val >> 8, data->addr + DATA_REG_OFFSET);
|
|
outb(++reg, data->addr + ADDR_REG_OFFSET);
|
|
outb(val & 0xff, data->addr + DATA_REG_OFFSET);
|
|
}
|
|
|
|
static struct f71805f_data *f71805f_update_device(struct device *dev)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
int nr, apnr;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
|
|
/* Limit registers cache is refreshed after 60 seconds */
|
|
if (time_after(jiffies, data->last_updated + 60 * HZ)
|
|
|| !data->valid) {
|
|
for (nr = 0; nr < 11; nr++) {
|
|
if (!(data->has_in & (1 << nr)))
|
|
continue;
|
|
data->in_high[nr] = f71805f_read8(data,
|
|
F71805F_REG_IN_HIGH(nr));
|
|
data->in_low[nr] = f71805f_read8(data,
|
|
F71805F_REG_IN_LOW(nr));
|
|
}
|
|
for (nr = 0; nr < 3; nr++) {
|
|
data->fan_low[nr] = f71805f_read16(data,
|
|
F71805F_REG_FAN_LOW(nr));
|
|
data->fan_target[nr] = f71805f_read16(data,
|
|
F71805F_REG_FAN_TARGET(nr));
|
|
data->pwm_freq[nr] = f71805f_read8(data,
|
|
F71805F_REG_PWM_FREQ(nr));
|
|
}
|
|
for (nr = 0; nr < 3; nr++) {
|
|
data->temp_high[nr] = f71805f_read8(data,
|
|
F71805F_REG_TEMP_HIGH(nr));
|
|
data->temp_hyst[nr] = f71805f_read8(data,
|
|
F71805F_REG_TEMP_HYST(nr));
|
|
}
|
|
data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE);
|
|
for (nr = 0; nr < 3; nr++) {
|
|
for (apnr = 0; apnr < 3; apnr++) {
|
|
data->auto_points[nr].temp[apnr] =
|
|
f71805f_read8(data,
|
|
F71805F_REG_PWM_AUTO_POINT_TEMP(nr,
|
|
apnr));
|
|
data->auto_points[nr].fan[apnr] =
|
|
f71805f_read16(data,
|
|
F71805F_REG_PWM_AUTO_POINT_FAN(nr,
|
|
apnr));
|
|
}
|
|
}
|
|
|
|
data->last_limits = jiffies;
|
|
}
|
|
|
|
/* Measurement registers cache is refreshed after 1 second */
|
|
if (time_after(jiffies, data->last_updated + HZ)
|
|
|| !data->valid) {
|
|
for (nr = 0; nr < 11; nr++) {
|
|
if (!(data->has_in & (1 << nr)))
|
|
continue;
|
|
data->in[nr] = f71805f_read8(data,
|
|
F71805F_REG_IN(nr));
|
|
}
|
|
for (nr = 0; nr < 3; nr++) {
|
|
data->fan[nr] = f71805f_read16(data,
|
|
F71805F_REG_FAN(nr));
|
|
data->fan_ctrl[nr] = f71805f_read8(data,
|
|
F71805F_REG_FAN_CTRL(nr));
|
|
data->pwm[nr] = f71805f_read8(data,
|
|
F71805F_REG_PWM_DUTY(nr));
|
|
}
|
|
for (nr = 0; nr < 3; nr++) {
|
|
data->temp[nr] = f71805f_read8(data,
|
|
F71805F_REG_TEMP(nr));
|
|
}
|
|
data->alarms = f71805f_read8(data, F71805F_REG_STATUS(0))
|
|
+ (f71805f_read8(data, F71805F_REG_STATUS(1)) << 8)
|
|
+ (f71805f_read8(data, F71805F_REG_STATUS(2)) << 16);
|
|
|
|
data->last_updated = jiffies;
|
|
data->valid = 1;
|
|
}
|
|
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return data;
|
|
}
|
|
|
|
/*
|
|
* Sysfs interface
|
|
*/
|
|
|
|
static ssize_t show_in0(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in0_from_reg(data->in[nr]));
|
|
}
|
|
|
|
static ssize_t show_in0_max(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in0_from_reg(data->in_high[nr]));
|
|
}
|
|
|
|
static ssize_t show_in0_min(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in0_from_reg(data->in_low[nr]));
|
|
}
|
|
|
|
static ssize_t set_in0_max(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_high[nr] = in0_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_in0_min(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_low[nr] = in0_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_in(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in_from_reg(data->in[nr]));
|
|
}
|
|
|
|
static ssize_t show_in_max(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in_from_reg(data->in_high[nr]));
|
|
}
|
|
|
|
static ssize_t show_in_min(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", in_from_reg(data->in_low[nr]));
|
|
}
|
|
|
|
static ssize_t set_in_max(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_high[nr] = in_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_IN_HIGH(nr), data->in_high[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_in_min(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->in_low[nr] = in_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_IN_LOW(nr), data->in_low[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_fan(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", fan_from_reg(data->fan[nr]));
|
|
}
|
|
|
|
static ssize_t show_fan_min(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", fan_from_reg(data->fan_low[nr]));
|
|
}
|
|
|
|
static ssize_t show_fan_target(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", fan_from_reg(data->fan_target[nr]));
|
|
}
|
|
|
|
static ssize_t set_fan_min(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->fan_low[nr] = fan_to_reg(val);
|
|
f71805f_write16(data, F71805F_REG_FAN_LOW(nr), data->fan_low[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_fan_target(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->fan_target[nr] = fan_to_reg(val);
|
|
f71805f_write16(data, F71805F_REG_FAN_TARGET(nr),
|
|
data->fan_target[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%d\n", (int)data->pwm[nr]);
|
|
}
|
|
|
|
static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
int mode;
|
|
|
|
switch (data->fan_ctrl[nr] & FAN_CTRL_MODE_MASK) {
|
|
case FAN_CTRL_MODE_SPEED:
|
|
mode = 3;
|
|
break;
|
|
case FAN_CTRL_MODE_TEMPERATURE:
|
|
mode = 2;
|
|
break;
|
|
default: /* MANUAL */
|
|
mode = 1;
|
|
}
|
|
|
|
return sprintf(buf, "%d\n", mode);
|
|
}
|
|
|
|
static ssize_t show_pwm_freq(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%lu\n", pwm_freq_from_reg(data->pwm_freq[nr]));
|
|
}
|
|
|
|
static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%d\n", pwm_mode_from_reg(data->fan_ctrl[nr]));
|
|
}
|
|
|
|
static ssize_t set_pwm(struct device *dev, struct device_attribute *devattr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
|
|
if (val > 255)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->pwm[nr] = val;
|
|
f71805f_write8(data, F71805F_REG_PWM_DUTY(nr), data->pwm[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static struct attribute *f71805f_attr_pwm[];
|
|
|
|
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
u8 reg;
|
|
|
|
if (val < 1 || val > 3)
|
|
return -EINVAL;
|
|
|
|
if (val > 1) { /* Automatic mode, user can't set PWM value */
|
|
if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
|
|
S_IRUGO))
|
|
dev_dbg(dev, "chmod -w pwm%d failed\n", nr + 1);
|
|
}
|
|
|
|
mutex_lock(&data->update_lock);
|
|
reg = f71805f_read8(data, F71805F_REG_FAN_CTRL(nr))
|
|
& ~FAN_CTRL_MODE_MASK;
|
|
switch (val) {
|
|
case 1:
|
|
reg |= FAN_CTRL_MODE_MANUAL;
|
|
break;
|
|
case 2:
|
|
reg |= FAN_CTRL_MODE_TEMPERATURE;
|
|
break;
|
|
case 3:
|
|
reg |= FAN_CTRL_MODE_SPEED;
|
|
break;
|
|
}
|
|
data->fan_ctrl[nr] = reg;
|
|
f71805f_write8(data, F71805F_REG_FAN_CTRL(nr), reg);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
if (val == 1) { /* Manual mode, user can set PWM value */
|
|
if (sysfs_chmod_file(&dev->kobj, f71805f_attr_pwm[nr],
|
|
S_IRUGO | S_IWUSR))
|
|
dev_dbg(dev, "chmod +w pwm%d failed\n", nr + 1);
|
|
}
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_pwm_freq(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->pwm_freq[nr] = pwm_freq_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_PWM_FREQ(nr), data->pwm_freq[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm_auto_point_temp(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char* buf)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
|
|
int pwmnr = attr->nr;
|
|
int apnr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n",
|
|
temp_from_reg(data->auto_points[pwmnr].temp[apnr]));
|
|
}
|
|
|
|
static ssize_t set_pwm_auto_point_temp(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char* buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
|
|
int pwmnr = attr->nr;
|
|
int apnr = attr->index;
|
|
unsigned long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->auto_points[pwmnr].temp[apnr] = temp_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr),
|
|
data->auto_points[pwmnr].temp[apnr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_pwm_auto_point_fan(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
char* buf)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
|
|
int pwmnr = attr->nr;
|
|
int apnr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n",
|
|
fan_from_reg(data->auto_points[pwmnr].fan[apnr]));
|
|
}
|
|
|
|
static ssize_t set_pwm_auto_point_fan(struct device *dev,
|
|
struct device_attribute *devattr,
|
|
const char* buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr);
|
|
int pwmnr = attr->nr;
|
|
int apnr = attr->index;
|
|
unsigned long val = simple_strtoul(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->auto_points[pwmnr].fan[apnr] = fan_to_reg(val);
|
|
f71805f_write16(data, F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr),
|
|
data->auto_points[pwmnr].fan[apnr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_temp(struct device *dev, struct device_attribute *devattr,
|
|
char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", temp_from_reg(data->temp[nr]));
|
|
}
|
|
|
|
static ssize_t show_temp_max(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", temp_from_reg(data->temp_high[nr]));
|
|
}
|
|
|
|
static ssize_t show_temp_hyst(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
return sprintf(buf, "%ld\n", temp_from_reg(data->temp_hyst[nr]));
|
|
}
|
|
|
|
static ssize_t show_temp_type(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
|
|
/* 3 is diode, 4 is thermistor */
|
|
return sprintf(buf, "%u\n", (data->temp_mode & (1 << nr)) ? 3 : 4);
|
|
}
|
|
|
|
static ssize_t set_temp_max(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_high[nr] = temp_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_TEMP_HIGH(nr), data->temp_high[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t set_temp_hyst(struct device *dev, struct device_attribute
|
|
*devattr, const char *buf, size_t count)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int nr = attr->index;
|
|
long val = simple_strtol(buf, NULL, 10);
|
|
|
|
mutex_lock(&data->update_lock);
|
|
data->temp_hyst[nr] = temp_to_reg(val);
|
|
f71805f_write8(data, F71805F_REG_TEMP_HYST(nr), data->temp_hyst[nr]);
|
|
mutex_unlock(&data->update_lock);
|
|
|
|
return count;
|
|
}
|
|
|
|
static ssize_t show_alarms_in(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
|
|
return sprintf(buf, "%lu\n", data->alarms & 0x7ff);
|
|
}
|
|
|
|
static ssize_t show_alarms_fan(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
|
|
return sprintf(buf, "%lu\n", (data->alarms >> 16) & 0x07);
|
|
}
|
|
|
|
static ssize_t show_alarms_temp(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
|
|
return sprintf(buf, "%lu\n", (data->alarms >> 11) & 0x07);
|
|
}
|
|
|
|
static ssize_t show_alarm(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = f71805f_update_device(dev);
|
|
struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr);
|
|
int bitnr = attr->index;
|
|
|
|
return sprintf(buf, "%lu\n", (data->alarms >> bitnr) & 1);
|
|
}
|
|
|
|
static ssize_t show_name(struct device *dev, struct device_attribute
|
|
*devattr, char *buf)
|
|
{
|
|
struct f71805f_data *data = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n", data->name);
|
|
}
|
|
|
|
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in0, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO| S_IWUSR,
|
|
show_in0_max, set_in0_max, 0);
|
|
static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO| S_IWUSR,
|
|
show_in0_min, set_in0_min, 0);
|
|
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 1);
|
|
static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 1);
|
|
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 2);
|
|
static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 2);
|
|
static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 3);
|
|
static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 3);
|
|
static SENSOR_DEVICE_ATTR(in4_input, S_IRUGO, show_in, NULL, 4);
|
|
static SENSOR_DEVICE_ATTR(in4_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 4);
|
|
static SENSOR_DEVICE_ATTR(in4_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 4);
|
|
static SENSOR_DEVICE_ATTR(in5_input, S_IRUGO, show_in, NULL, 5);
|
|
static SENSOR_DEVICE_ATTR(in5_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 5);
|
|
static SENSOR_DEVICE_ATTR(in5_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 5);
|
|
static SENSOR_DEVICE_ATTR(in6_input, S_IRUGO, show_in, NULL, 6);
|
|
static SENSOR_DEVICE_ATTR(in6_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 6);
|
|
static SENSOR_DEVICE_ATTR(in6_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 6);
|
|
static SENSOR_DEVICE_ATTR(in7_input, S_IRUGO, show_in, NULL, 7);
|
|
static SENSOR_DEVICE_ATTR(in7_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 7);
|
|
static SENSOR_DEVICE_ATTR(in7_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 7);
|
|
static SENSOR_DEVICE_ATTR(in8_input, S_IRUGO, show_in, NULL, 8);
|
|
static SENSOR_DEVICE_ATTR(in8_max, S_IRUGO | S_IWUSR,
|
|
show_in_max, set_in_max, 8);
|
|
static SENSOR_DEVICE_ATTR(in8_min, S_IRUGO | S_IWUSR,
|
|
show_in_min, set_in_min, 8);
|
|
static SENSOR_DEVICE_ATTR(in9_input, S_IRUGO, show_in0, NULL, 9);
|
|
static SENSOR_DEVICE_ATTR(in9_max, S_IRUGO | S_IWUSR,
|
|
show_in0_max, set_in0_max, 9);
|
|
static SENSOR_DEVICE_ATTR(in9_min, S_IRUGO | S_IWUSR,
|
|
show_in0_min, set_in0_min, 9);
|
|
static SENSOR_DEVICE_ATTR(in10_input, S_IRUGO, show_in0, NULL, 10);
|
|
static SENSOR_DEVICE_ATTR(in10_max, S_IRUGO | S_IWUSR,
|
|
show_in0_max, set_in0_max, 10);
|
|
static SENSOR_DEVICE_ATTR(in10_min, S_IRUGO | S_IWUSR,
|
|
show_in0_min, set_in0_min, 10);
|
|
|
|
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, set_fan_min, 0);
|
|
static SENSOR_DEVICE_ATTR(fan1_target, S_IRUGO | S_IWUSR,
|
|
show_fan_target, set_fan_target, 0);
|
|
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, set_fan_min, 1);
|
|
static SENSOR_DEVICE_ATTR(fan2_target, S_IRUGO | S_IWUSR,
|
|
show_fan_target, set_fan_target, 1);
|
|
static SENSOR_DEVICE_ATTR(fan3_input, S_IRUGO, show_fan, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(fan3_min, S_IRUGO | S_IWUSR,
|
|
show_fan_min, set_fan_min, 2);
|
|
static SENSOR_DEVICE_ATTR(fan3_target, S_IRUGO | S_IWUSR,
|
|
show_fan_target, set_fan_target, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO | S_IWUSR,
|
|
show_temp_hyst, set_temp_hyst, 0);
|
|
static SENSOR_DEVICE_ATTR(temp1_type, S_IRUGO, show_temp_type, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO | S_IWUSR,
|
|
show_temp_hyst, set_temp_hyst, 1);
|
|
static SENSOR_DEVICE_ATTR(temp2_type, S_IRUGO, show_temp_type, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(temp3_input, S_IRUGO, show_temp, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_max, S_IRUGO | S_IWUSR,
|
|
show_temp_max, set_temp_max, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_max_hyst, S_IRUGO | S_IWUSR,
|
|
show_temp_hyst, set_temp_hyst, 2);
|
|
static SENSOR_DEVICE_ATTR(temp3_type, S_IRUGO, show_temp_type, NULL, 2);
|
|
|
|
/* pwm (value) files are created read-only, write permission is
|
|
then added or removed dynamically as needed */
|
|
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO, show_pwm, set_pwm, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO | S_IWUSR,
|
|
show_pwm_enable, set_pwm_enable, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm1_freq, S_IRUGO | S_IWUSR,
|
|
show_pwm_freq, set_pwm_freq, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO, show_pwm_mode, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO, show_pwm, set_pwm, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO | S_IWUSR,
|
|
show_pwm_enable, set_pwm_enable, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm2_freq, S_IRUGO | S_IWUSR,
|
|
show_pwm_freq, set_pwm_freq, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO, show_pwm_mode, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(pwm3, S_IRUGO, show_pwm, set_pwm, 2);
|
|
static SENSOR_DEVICE_ATTR(pwm3_enable, S_IRUGO | S_IWUSR,
|
|
show_pwm_enable, set_pwm_enable, 2);
|
|
static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR,
|
|
show_pwm_freq, set_pwm_freq, 2);
|
|
static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
0, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
0, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
0, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
0, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
0, 2);
|
|
static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
0, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
1, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
1, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
1, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
1, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
1, 2);
|
|
static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
1, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
2, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
2, 0);
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
2, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
2, 1);
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_temp, set_pwm_auto_point_temp,
|
|
2, 2);
|
|
static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_fan, S_IRUGO | S_IWUSR,
|
|
show_pwm_auto_point_fan, set_pwm_auto_point_fan,
|
|
2, 2);
|
|
|
|
static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0);
|
|
static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1);
|
|
static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2);
|
|
static SENSOR_DEVICE_ATTR(in3_alarm, S_IRUGO, show_alarm, NULL, 3);
|
|
static SENSOR_DEVICE_ATTR(in4_alarm, S_IRUGO, show_alarm, NULL, 4);
|
|
static SENSOR_DEVICE_ATTR(in5_alarm, S_IRUGO, show_alarm, NULL, 5);
|
|
static SENSOR_DEVICE_ATTR(in6_alarm, S_IRUGO, show_alarm, NULL, 6);
|
|
static SENSOR_DEVICE_ATTR(in7_alarm, S_IRUGO, show_alarm, NULL, 7);
|
|
static SENSOR_DEVICE_ATTR(in8_alarm, S_IRUGO, show_alarm, NULL, 8);
|
|
static SENSOR_DEVICE_ATTR(in9_alarm, S_IRUGO, show_alarm, NULL, 9);
|
|
static SENSOR_DEVICE_ATTR(in10_alarm, S_IRUGO, show_alarm, NULL, 10);
|
|
static SENSOR_DEVICE_ATTR(temp1_alarm, S_IRUGO, show_alarm, NULL, 11);
|
|
static SENSOR_DEVICE_ATTR(temp2_alarm, S_IRUGO, show_alarm, NULL, 12);
|
|
static SENSOR_DEVICE_ATTR(temp3_alarm, S_IRUGO, show_alarm, NULL, 13);
|
|
static SENSOR_DEVICE_ATTR(fan1_alarm, S_IRUGO, show_alarm, NULL, 16);
|
|
static SENSOR_DEVICE_ATTR(fan2_alarm, S_IRUGO, show_alarm, NULL, 17);
|
|
static SENSOR_DEVICE_ATTR(fan3_alarm, S_IRUGO, show_alarm, NULL, 18);
|
|
static DEVICE_ATTR(alarms_in, S_IRUGO, show_alarms_in, NULL);
|
|
static DEVICE_ATTR(alarms_fan, S_IRUGO, show_alarms_fan, NULL);
|
|
static DEVICE_ATTR(alarms_temp, S_IRUGO, show_alarms_temp, NULL);
|
|
|
|
static DEVICE_ATTR(name, S_IRUGO, show_name, NULL);
|
|
|
|
static struct attribute *f71805f_attributes[] = {
|
|
&sensor_dev_attr_in0_input.dev_attr.attr,
|
|
&sensor_dev_attr_in0_max.dev_attr.attr,
|
|
&sensor_dev_attr_in0_min.dev_attr.attr,
|
|
&sensor_dev_attr_in1_input.dev_attr.attr,
|
|
&sensor_dev_attr_in1_max.dev_attr.attr,
|
|
&sensor_dev_attr_in1_min.dev_attr.attr,
|
|
&sensor_dev_attr_in2_input.dev_attr.attr,
|
|
&sensor_dev_attr_in2_max.dev_attr.attr,
|
|
&sensor_dev_attr_in2_min.dev_attr.attr,
|
|
&sensor_dev_attr_in3_input.dev_attr.attr,
|
|
&sensor_dev_attr_in3_max.dev_attr.attr,
|
|
&sensor_dev_attr_in3_min.dev_attr.attr,
|
|
&sensor_dev_attr_in5_input.dev_attr.attr,
|
|
&sensor_dev_attr_in5_max.dev_attr.attr,
|
|
&sensor_dev_attr_in5_min.dev_attr.attr,
|
|
&sensor_dev_attr_in6_input.dev_attr.attr,
|
|
&sensor_dev_attr_in6_max.dev_attr.attr,
|
|
&sensor_dev_attr_in6_min.dev_attr.attr,
|
|
&sensor_dev_attr_in7_input.dev_attr.attr,
|
|
&sensor_dev_attr_in7_max.dev_attr.attr,
|
|
&sensor_dev_attr_in7_min.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_fan1_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan1_target.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan2_target.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_input.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_min.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_fan3_target.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_enable.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_mode.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_temp1_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp1_type.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_type.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_input.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_max_hyst.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_type.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point1_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point2_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm1_auto_point3_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point1_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point2_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_auto_point3_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point1_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point2_fan.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_auto_point3_fan.dev_attr.attr,
|
|
|
|
&sensor_dev_attr_in0_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in3_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in5_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in6_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_in7_alarm.dev_attr.attr,
|
|
&dev_attr_alarms_in.attr,
|
|
&sensor_dev_attr_temp1_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp2_alarm.dev_attr.attr,
|
|
&sensor_dev_attr_temp3_alarm.dev_attr.attr,
|
|
&dev_attr_alarms_temp.attr,
|
|
&dev_attr_alarms_fan.attr,
|
|
|
|
&dev_attr_name.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group f71805f_group = {
|
|
.attrs = f71805f_attributes,
|
|
};
|
|
|
|
static struct attribute *f71805f_attributes_optin[4][5] = {
|
|
{
|
|
&sensor_dev_attr_in4_input.dev_attr.attr,
|
|
&sensor_dev_attr_in4_max.dev_attr.attr,
|
|
&sensor_dev_attr_in4_min.dev_attr.attr,
|
|
&sensor_dev_attr_in4_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in8_input.dev_attr.attr,
|
|
&sensor_dev_attr_in8_max.dev_attr.attr,
|
|
&sensor_dev_attr_in8_min.dev_attr.attr,
|
|
&sensor_dev_attr_in8_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in9_input.dev_attr.attr,
|
|
&sensor_dev_attr_in9_max.dev_attr.attr,
|
|
&sensor_dev_attr_in9_min.dev_attr.attr,
|
|
&sensor_dev_attr_in9_alarm.dev_attr.attr,
|
|
NULL
|
|
}, {
|
|
&sensor_dev_attr_in10_input.dev_attr.attr,
|
|
&sensor_dev_attr_in10_max.dev_attr.attr,
|
|
&sensor_dev_attr_in10_min.dev_attr.attr,
|
|
&sensor_dev_attr_in10_alarm.dev_attr.attr,
|
|
NULL
|
|
}
|
|
};
|
|
|
|
static const struct attribute_group f71805f_group_optin[4] = {
|
|
{ .attrs = f71805f_attributes_optin[0] },
|
|
{ .attrs = f71805f_attributes_optin[1] },
|
|
{ .attrs = f71805f_attributes_optin[2] },
|
|
{ .attrs = f71805f_attributes_optin[3] },
|
|
};
|
|
|
|
/* We don't include pwm_freq files in the arrays above, because they must be
|
|
created conditionally (only if pwm_mode is 1 == PWM) */
|
|
static struct attribute *f71805f_attributes_pwm_freq[] = {
|
|
&sensor_dev_attr_pwm1_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2_freq.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3_freq.dev_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group f71805f_group_pwm_freq = {
|
|
.attrs = f71805f_attributes_pwm_freq,
|
|
};
|
|
|
|
/* We also need an indexed access to pwmN files to toggle writability */
|
|
static struct attribute *f71805f_attr_pwm[] = {
|
|
&sensor_dev_attr_pwm1.dev_attr.attr,
|
|
&sensor_dev_attr_pwm2.dev_attr.attr,
|
|
&sensor_dev_attr_pwm3.dev_attr.attr,
|
|
};
|
|
|
|
/*
|
|
* Device registration and initialization
|
|
*/
|
|
|
|
static void __devinit f71805f_init_device(struct f71805f_data *data)
|
|
{
|
|
u8 reg;
|
|
int i;
|
|
|
|
reg = f71805f_read8(data, F71805F_REG_START);
|
|
if ((reg & 0x41) != 0x01) {
|
|
printk(KERN_DEBUG DRVNAME ": Starting monitoring "
|
|
"operations\n");
|
|
f71805f_write8(data, F71805F_REG_START, (reg | 0x01) & ~0x40);
|
|
}
|
|
|
|
/* Fan monitoring can be disabled. If it is, we won't be polling
|
|
the register values, and won't create the related sysfs files. */
|
|
for (i = 0; i < 3; i++) {
|
|
data->fan_ctrl[i] = f71805f_read8(data,
|
|
F71805F_REG_FAN_CTRL(i));
|
|
/* Clear latch full bit, else "speed mode" fan speed control
|
|
doesn't work */
|
|
if (data->fan_ctrl[i] & FAN_CTRL_LATCH_FULL) {
|
|
data->fan_ctrl[i] &= ~FAN_CTRL_LATCH_FULL;
|
|
f71805f_write8(data, F71805F_REG_FAN_CTRL(i),
|
|
data->fan_ctrl[i]);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int __devinit f71805f_probe(struct platform_device *pdev)
|
|
{
|
|
struct f71805f_sio_data *sio_data = pdev->dev.platform_data;
|
|
struct f71805f_data *data;
|
|
struct resource *res;
|
|
int i, err;
|
|
|
|
static const char *names[] = {
|
|
"f71805f",
|
|
"f71872f",
|
|
};
|
|
|
|
if (!(data = kzalloc(sizeof(struct f71805f_data), GFP_KERNEL))) {
|
|
err = -ENOMEM;
|
|
printk(KERN_ERR DRVNAME ": Out of memory\n");
|
|
goto exit;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
if (!request_region(res->start + ADDR_REG_OFFSET, 2, DRVNAME)) {
|
|
err = -EBUSY;
|
|
dev_err(&pdev->dev, "Failed to request region 0x%lx-0x%lx\n",
|
|
(unsigned long)(res->start + ADDR_REG_OFFSET),
|
|
(unsigned long)(res->start + ADDR_REG_OFFSET + 1));
|
|
goto exit_free;
|
|
}
|
|
data->addr = res->start;
|
|
data->name = names[sio_data->kind];
|
|
mutex_init(&data->update_lock);
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/* Some voltage inputs depend on chip model and configuration */
|
|
switch (sio_data->kind) {
|
|
case f71805f:
|
|
data->has_in = 0x1ff;
|
|
break;
|
|
case f71872f:
|
|
data->has_in = 0x6ef;
|
|
if (sio_data->fnsel1 & 0x01)
|
|
data->has_in |= (1 << 4); /* in4 */
|
|
if (sio_data->fnsel1 & 0x02)
|
|
data->has_in |= (1 << 8); /* in8 */
|
|
break;
|
|
}
|
|
|
|
/* Initialize the F71805F chip */
|
|
f71805f_init_device(data);
|
|
|
|
/* Register sysfs interface files */
|
|
if ((err = sysfs_create_group(&pdev->dev.kobj, &f71805f_group)))
|
|
goto exit_release_region;
|
|
if (data->has_in & (1 << 4)) { /* in4 */
|
|
if ((err = sysfs_create_group(&pdev->dev.kobj,
|
|
&f71805f_group_optin[0])))
|
|
goto exit_remove_files;
|
|
}
|
|
if (data->has_in & (1 << 8)) { /* in8 */
|
|
if ((err = sysfs_create_group(&pdev->dev.kobj,
|
|
&f71805f_group_optin[1])))
|
|
goto exit_remove_files;
|
|
}
|
|
if (data->has_in & (1 << 9)) { /* in9 (F71872F/FG only) */
|
|
if ((err = sysfs_create_group(&pdev->dev.kobj,
|
|
&f71805f_group_optin[2])))
|
|
goto exit_remove_files;
|
|
}
|
|
if (data->has_in & (1 << 10)) { /* in9 (F71872F/FG only) */
|
|
if ((err = sysfs_create_group(&pdev->dev.kobj,
|
|
&f71805f_group_optin[3])))
|
|
goto exit_remove_files;
|
|
}
|
|
for (i = 0; i < 3; i++) {
|
|
/* If control mode is PWM, create pwm_freq file */
|
|
if (!(data->fan_ctrl[i] & FAN_CTRL_DC_MODE)) {
|
|
if ((err = sysfs_create_file(&pdev->dev.kobj,
|
|
f71805f_attributes_pwm_freq[i])))
|
|
goto exit_remove_files;
|
|
}
|
|
/* If PWM is in manual mode, add write permission */
|
|
if (data->fan_ctrl[i] & FAN_CTRL_MODE_MANUAL) {
|
|
if ((err = sysfs_chmod_file(&pdev->dev.kobj,
|
|
f71805f_attr_pwm[i],
|
|
S_IRUGO | S_IWUSR))) {
|
|
dev_err(&pdev->dev, "chmod +w pwm%d failed\n",
|
|
i + 1);
|
|
goto exit_remove_files;
|
|
}
|
|
}
|
|
}
|
|
|
|
data->hwmon_dev = hwmon_device_register(&pdev->dev);
|
|
if (IS_ERR(data->hwmon_dev)) {
|
|
err = PTR_ERR(data->hwmon_dev);
|
|
dev_err(&pdev->dev, "Class registration failed (%d)\n", err);
|
|
goto exit_remove_files;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_remove_files:
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
|
|
for (i = 0; i < 4; i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
|
|
exit_release_region:
|
|
release_region(res->start + ADDR_REG_OFFSET, 2);
|
|
exit_free:
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __devexit f71805f_remove(struct platform_device *pdev)
|
|
{
|
|
struct f71805f_data *data = platform_get_drvdata(pdev);
|
|
struct resource *res;
|
|
int i;
|
|
|
|
hwmon_device_unregister(data->hwmon_dev);
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group);
|
|
for (i = 0; i < 4; i++)
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_optin[i]);
|
|
sysfs_remove_group(&pdev->dev.kobj, &f71805f_group_pwm_freq);
|
|
platform_set_drvdata(pdev, NULL);
|
|
kfree(data);
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
|
|
release_region(res->start + ADDR_REG_OFFSET, 2);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver f71805f_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = DRVNAME,
|
|
},
|
|
.probe = f71805f_probe,
|
|
.remove = __devexit_p(f71805f_remove),
|
|
};
|
|
|
|
static int __init f71805f_device_add(unsigned short address,
|
|
const struct f71805f_sio_data *sio_data)
|
|
{
|
|
struct resource res = {
|
|
.start = address,
|
|
.end = address + REGION_LENGTH - 1,
|
|
.flags = IORESOURCE_IO,
|
|
};
|
|
int err;
|
|
|
|
pdev = platform_device_alloc(DRVNAME, address);
|
|
if (!pdev) {
|
|
err = -ENOMEM;
|
|
printk(KERN_ERR DRVNAME ": Device allocation failed\n");
|
|
goto exit;
|
|
}
|
|
|
|
res.name = pdev->name;
|
|
err = acpi_check_resource_conflict(&res);
|
|
if (err)
|
|
goto exit_device_put;
|
|
|
|
err = platform_device_add_resources(pdev, &res, 1);
|
|
if (err) {
|
|
printk(KERN_ERR DRVNAME ": Device resource addition failed "
|
|
"(%d)\n", err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add_data(pdev, sio_data,
|
|
sizeof(struct f71805f_sio_data));
|
|
if (err) {
|
|
printk(KERN_ERR DRVNAME ": Platform data allocation failed\n");
|
|
goto exit_device_put;
|
|
}
|
|
|
|
err = platform_device_add(pdev);
|
|
if (err) {
|
|
printk(KERN_ERR DRVNAME ": Device addition failed (%d)\n",
|
|
err);
|
|
goto exit_device_put;
|
|
}
|
|
|
|
return 0;
|
|
|
|
exit_device_put:
|
|
platform_device_put(pdev);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static int __init f71805f_find(int sioaddr, unsigned short *address,
|
|
struct f71805f_sio_data *sio_data)
|
|
{
|
|
int err = -ENODEV;
|
|
u16 devid;
|
|
|
|
static const char *names[] = {
|
|
"F71805F/FG",
|
|
"F71872F/FG or F71806F/FG",
|
|
};
|
|
|
|
superio_enter(sioaddr);
|
|
|
|
devid = superio_inw(sioaddr, SIO_REG_MANID);
|
|
if (devid != SIO_FINTEK_ID)
|
|
goto exit;
|
|
|
|
devid = force_id ? force_id : superio_inw(sioaddr, SIO_REG_DEVID);
|
|
switch (devid) {
|
|
case SIO_F71805F_ID:
|
|
sio_data->kind = f71805f;
|
|
break;
|
|
case SIO_F71872F_ID:
|
|
sio_data->kind = f71872f;
|
|
sio_data->fnsel1 = superio_inb(sioaddr, SIO_REG_FNSEL1);
|
|
break;
|
|
default:
|
|
printk(KERN_INFO DRVNAME ": Unsupported Fintek device, "
|
|
"skipping\n");
|
|
goto exit;
|
|
}
|
|
|
|
superio_select(sioaddr, F71805F_LD_HWM);
|
|
if (!(superio_inb(sioaddr, SIO_REG_ENABLE) & 0x01)) {
|
|
printk(KERN_WARNING DRVNAME ": Device not activated, "
|
|
"skipping\n");
|
|
goto exit;
|
|
}
|
|
|
|
*address = superio_inw(sioaddr, SIO_REG_ADDR);
|
|
if (*address == 0) {
|
|
printk(KERN_WARNING DRVNAME ": Base address not set, "
|
|
"skipping\n");
|
|
goto exit;
|
|
}
|
|
*address &= ~(REGION_LENGTH - 1); /* Ignore 3 LSB */
|
|
|
|
err = 0;
|
|
printk(KERN_INFO DRVNAME ": Found %s chip at %#x, revision %u\n",
|
|
names[sio_data->kind], *address,
|
|
superio_inb(sioaddr, SIO_REG_DEVREV));
|
|
|
|
exit:
|
|
superio_exit(sioaddr);
|
|
return err;
|
|
}
|
|
|
|
static int __init f71805f_init(void)
|
|
{
|
|
int err;
|
|
unsigned short address;
|
|
struct f71805f_sio_data sio_data;
|
|
|
|
if (f71805f_find(0x2e, &address, &sio_data)
|
|
&& f71805f_find(0x4e, &address, &sio_data))
|
|
return -ENODEV;
|
|
|
|
err = platform_driver_register(&f71805f_driver);
|
|
if (err)
|
|
goto exit;
|
|
|
|
/* Sets global pdev as a side effect */
|
|
err = f71805f_device_add(address, &sio_data);
|
|
if (err)
|
|
goto exit_driver;
|
|
|
|
return 0;
|
|
|
|
exit_driver:
|
|
platform_driver_unregister(&f71805f_driver);
|
|
exit:
|
|
return err;
|
|
}
|
|
|
|
static void __exit f71805f_exit(void)
|
|
{
|
|
platform_device_unregister(pdev);
|
|
platform_driver_unregister(&f71805f_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Jean Delvare <khali@linux-fr>");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("F71805F/F71872F hardware monitoring driver");
|
|
|
|
module_init(f71805f_init);
|
|
module_exit(f71805f_exit);
|