mirror of
https://github.com/torvalds/linux.git
synced 2024-11-13 23:51:39 +00:00
9281b16caa
The old IDE cmd64x checks the status of the CNTRL register to see if the ports are enabled before probing them. pata_cmd64x doesn't do this, which causes a HPMC on parisc when it tries to poke at the secondary port because apparently the BAR isn't wired up (and a non-responding piece of memory causes a HPMC). Fix this by porting the CNTRL register port detection logic from IDE cmd64x. In addition, following converns from Alan Cox, add a check to see if a mobility electronics bridge is the immediate parent and forgo the check if it is (prevents problems on hotplug controllers). Signed-off-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
463 lines
11 KiB
C
463 lines
11 KiB
C
/*
|
|
* pata_cmd64x.c - CMD64x PATA for new ATA layer
|
|
* (C) 2005 Red Hat Inc
|
|
* Alan Cox <alan@lxorguk.ukuu.org.uk>
|
|
* (C) 2009-2010 Bartlomiej Zolnierkiewicz
|
|
*
|
|
* Based upon
|
|
* linux/drivers/ide/pci/cmd64x.c Version 1.30 Sept 10, 2002
|
|
*
|
|
* cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
|
|
* Note, this driver is not used at all on other systems because
|
|
* there the "BIOS" has done all of the following already.
|
|
* Due to massive hardware bugs, UltraDMA is only supported
|
|
* on the 646U2 and not on the 646U.
|
|
*
|
|
* Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
|
|
* Copyright (C) 1998 David S. Miller (davem@redhat.com)
|
|
*
|
|
* Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
|
|
*
|
|
* TODO
|
|
* Testing work
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
#include <linux/delay.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <linux/libata.h>
|
|
|
|
#define DRV_NAME "pata_cmd64x"
|
|
#define DRV_VERSION "0.2.5"
|
|
|
|
/*
|
|
* CMD64x specific registers definition.
|
|
*/
|
|
|
|
enum {
|
|
CFR = 0x50,
|
|
CFR_INTR_CH0 = 0x04,
|
|
CNTRL = 0x51,
|
|
CNTRL_CH0 = 0x04,
|
|
CNTRL_CH1 = 0x08,
|
|
CMDTIM = 0x52,
|
|
ARTTIM0 = 0x53,
|
|
DRWTIM0 = 0x54,
|
|
ARTTIM1 = 0x55,
|
|
DRWTIM1 = 0x56,
|
|
ARTTIM23 = 0x57,
|
|
ARTTIM23_DIS_RA2 = 0x04,
|
|
ARTTIM23_DIS_RA3 = 0x08,
|
|
ARTTIM23_INTR_CH1 = 0x10,
|
|
DRWTIM2 = 0x58,
|
|
BRST = 0x59,
|
|
DRWTIM3 = 0x5b,
|
|
BMIDECR0 = 0x70,
|
|
MRDMODE = 0x71,
|
|
MRDMODE_INTR_CH0 = 0x04,
|
|
MRDMODE_INTR_CH1 = 0x08,
|
|
BMIDESR0 = 0x72,
|
|
UDIDETCR0 = 0x73,
|
|
DTPR0 = 0x74,
|
|
BMIDECR1 = 0x78,
|
|
BMIDECSR = 0x79,
|
|
UDIDETCR1 = 0x7B,
|
|
DTPR1 = 0x7C
|
|
};
|
|
|
|
static int cmd648_cable_detect(struct ata_port *ap)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 r;
|
|
|
|
/* Check cable detect bits */
|
|
pci_read_config_byte(pdev, BMIDECSR, &r);
|
|
if (r & (1 << ap->port_no))
|
|
return ATA_CBL_PATA80;
|
|
return ATA_CBL_PATA40;
|
|
}
|
|
|
|
/**
|
|
* cmd64x_set_piomode - set PIO and MWDMA timing
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
* @mode: mode
|
|
*
|
|
* Called to do the PIO and MWDMA mode setup.
|
|
*/
|
|
|
|
static void cmd64x_set_timing(struct ata_port *ap, struct ata_device *adev, u8 mode)
|
|
{
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
struct ata_timing t;
|
|
const unsigned long T = 1000000 / 33;
|
|
const u8 setup_data[] = { 0x40, 0x40, 0x40, 0x80, 0x00 };
|
|
|
|
u8 reg;
|
|
|
|
/* Port layout is not logical so use a table */
|
|
const u8 arttim_port[2][2] = {
|
|
{ ARTTIM0, ARTTIM1 },
|
|
{ ARTTIM23, ARTTIM23 }
|
|
};
|
|
const u8 drwtim_port[2][2] = {
|
|
{ DRWTIM0, DRWTIM1 },
|
|
{ DRWTIM2, DRWTIM3 }
|
|
};
|
|
|
|
int arttim = arttim_port[ap->port_no][adev->devno];
|
|
int drwtim = drwtim_port[ap->port_no][adev->devno];
|
|
|
|
/* ata_timing_compute is smart and will produce timings for MWDMA
|
|
that don't violate the drives PIO capabilities. */
|
|
if (ata_timing_compute(adev, mode, &t, T, 0) < 0) {
|
|
printk(KERN_ERR DRV_NAME ": mode computation failed.\n");
|
|
return;
|
|
}
|
|
if (ap->port_no) {
|
|
/* Slave has shared address setup */
|
|
struct ata_device *pair = ata_dev_pair(adev);
|
|
|
|
if (pair) {
|
|
struct ata_timing tp;
|
|
ata_timing_compute(pair, pair->pio_mode, &tp, T, 0);
|
|
ata_timing_merge(&t, &tp, &t, ATA_TIMING_SETUP);
|
|
}
|
|
}
|
|
|
|
printk(KERN_DEBUG DRV_NAME ": active %d recovery %d setup %d.\n",
|
|
t.active, t.recover, t.setup);
|
|
if (t.recover > 16) {
|
|
t.active += t.recover - 16;
|
|
t.recover = 16;
|
|
}
|
|
if (t.active > 16)
|
|
t.active = 16;
|
|
|
|
/* Now convert the clocks into values we can actually stuff into
|
|
the chip */
|
|
|
|
if (t.recover == 16)
|
|
t.recover = 0;
|
|
else if (t.recover > 1)
|
|
t.recover--;
|
|
else
|
|
t.recover = 15;
|
|
|
|
if (t.setup > 4)
|
|
t.setup = 0xC0;
|
|
else
|
|
t.setup = setup_data[t.setup];
|
|
|
|
t.active &= 0x0F; /* 0 = 16 */
|
|
|
|
/* Load setup timing */
|
|
pci_read_config_byte(pdev, arttim, ®);
|
|
reg &= 0x3F;
|
|
reg |= t.setup;
|
|
pci_write_config_byte(pdev, arttim, reg);
|
|
|
|
/* Load active/recovery */
|
|
pci_write_config_byte(pdev, drwtim, (t.active << 4) | t.recover);
|
|
}
|
|
|
|
/**
|
|
* cmd64x_set_piomode - set initial PIO mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Used when configuring the devices ot set the PIO timings. All the
|
|
* actual work is done by the PIO/MWDMA setting helper
|
|
*/
|
|
|
|
static void cmd64x_set_piomode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
cmd64x_set_timing(ap, adev, adev->pio_mode);
|
|
}
|
|
|
|
/**
|
|
* cmd64x_set_dmamode - set initial DMA mode data
|
|
* @ap: ATA interface
|
|
* @adev: ATA device
|
|
*
|
|
* Called to do the DMA mode setup.
|
|
*/
|
|
|
|
static void cmd64x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
|
|
{
|
|
static const u8 udma_data[] = {
|
|
0x30, 0x20, 0x10, 0x20, 0x10, 0x00
|
|
};
|
|
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 regU, regD;
|
|
|
|
int pciU = UDIDETCR0 + 8 * ap->port_no;
|
|
int pciD = BMIDESR0 + 8 * ap->port_no;
|
|
int shift = 2 * adev->devno;
|
|
|
|
pci_read_config_byte(pdev, pciD, ®D);
|
|
pci_read_config_byte(pdev, pciU, ®U);
|
|
|
|
/* DMA bits off */
|
|
regD &= ~(0x20 << adev->devno);
|
|
/* DMA control bits */
|
|
regU &= ~(0x30 << shift);
|
|
/* DMA timing bits */
|
|
regU &= ~(0x05 << adev->devno);
|
|
|
|
if (adev->dma_mode >= XFER_UDMA_0) {
|
|
/* Merge the timing value */
|
|
regU |= udma_data[adev->dma_mode - XFER_UDMA_0] << shift;
|
|
/* Merge the control bits */
|
|
regU |= 1 << adev->devno; /* UDMA on */
|
|
if (adev->dma_mode > XFER_UDMA_2) /* 15nS timing */
|
|
regU |= 4 << adev->devno;
|
|
} else {
|
|
regU &= ~ (1 << adev->devno); /* UDMA off */
|
|
cmd64x_set_timing(ap, adev, adev->dma_mode);
|
|
}
|
|
|
|
regD |= 0x20 << adev->devno;
|
|
|
|
pci_write_config_byte(pdev, pciU, regU);
|
|
pci_write_config_byte(pdev, pciD, regD);
|
|
}
|
|
|
|
/**
|
|
* cmd648_dma_stop - DMA stop callback
|
|
* @qc: Command in progress
|
|
*
|
|
* DMA has completed.
|
|
*/
|
|
|
|
static void cmd648_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
struct ata_port *ap = qc->ap;
|
|
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
|
|
u8 dma_intr;
|
|
int dma_mask = ap->port_no ? ARTTIM23_INTR_CH1 : CFR_INTR_CH0;
|
|
int dma_reg = ap->port_no ? ARTTIM23 : CFR;
|
|
|
|
ata_bmdma_stop(qc);
|
|
|
|
pci_read_config_byte(pdev, dma_reg, &dma_intr);
|
|
pci_write_config_byte(pdev, dma_reg, dma_intr | dma_mask);
|
|
}
|
|
|
|
/**
|
|
* cmd646r1_dma_stop - DMA stop callback
|
|
* @qc: Command in progress
|
|
*
|
|
* Stub for now while investigating the r1 quirk in the old driver.
|
|
*/
|
|
|
|
static void cmd646r1_bmdma_stop(struct ata_queued_cmd *qc)
|
|
{
|
|
ata_bmdma_stop(qc);
|
|
}
|
|
|
|
static struct scsi_host_template cmd64x_sht = {
|
|
ATA_BMDMA_SHT(DRV_NAME),
|
|
};
|
|
|
|
static const struct ata_port_operations cmd64x_base_ops = {
|
|
.inherits = &ata_bmdma_port_ops,
|
|
.set_piomode = cmd64x_set_piomode,
|
|
.set_dmamode = cmd64x_set_dmamode,
|
|
};
|
|
|
|
static struct ata_port_operations cmd64x_port_ops = {
|
|
.inherits = &cmd64x_base_ops,
|
|
.cable_detect = ata_cable_40wire,
|
|
};
|
|
|
|
static struct ata_port_operations cmd646r1_port_ops = {
|
|
.inherits = &cmd64x_base_ops,
|
|
.bmdma_stop = cmd646r1_bmdma_stop,
|
|
.cable_detect = ata_cable_40wire,
|
|
};
|
|
|
|
static struct ata_port_operations cmd648_port_ops = {
|
|
.inherits = &cmd64x_base_ops,
|
|
.bmdma_stop = cmd648_bmdma_stop,
|
|
.cable_detect = cmd648_cable_detect,
|
|
};
|
|
|
|
static int cmd64x_init_one(struct pci_dev *pdev, const struct pci_device_id *id)
|
|
{
|
|
static const struct ata_port_info cmd_info[6] = {
|
|
{ /* CMD 643 - no UDMA */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.port_ops = &cmd64x_port_ops
|
|
},
|
|
{ /* CMD 646 with broken UDMA */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.port_ops = &cmd64x_port_ops
|
|
},
|
|
{ /* CMD 646 with working UDMA */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA2,
|
|
.port_ops = &cmd64x_port_ops
|
|
},
|
|
{ /* CMD 646 rev 1 */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.port_ops = &cmd646r1_port_ops
|
|
},
|
|
{ /* CMD 648 */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA4,
|
|
.port_ops = &cmd648_port_ops
|
|
},
|
|
{ /* CMD 649 */
|
|
.flags = ATA_FLAG_SLAVE_POSS,
|
|
.pio_mask = ATA_PIO4,
|
|
.mwdma_mask = ATA_MWDMA2,
|
|
.udma_mask = ATA_UDMA5,
|
|
.port_ops = &cmd648_port_ops
|
|
}
|
|
};
|
|
const struct ata_port_info *ppi[] = {
|
|
&cmd_info[id->driver_data],
|
|
&cmd_info[id->driver_data],
|
|
NULL
|
|
};
|
|
u8 mrdmode, reg;
|
|
int rc;
|
|
struct pci_dev *bridge = pdev->bus->self;
|
|
/* mobility split bridges don't report enabled ports correctly */
|
|
int port_ok = !(bridge && bridge->vendor ==
|
|
PCI_VENDOR_ID_MOBILITY_ELECTRONICS);
|
|
/* all (with exceptions below) apart from 643 have CNTRL_CH0 bit */
|
|
int cntrl_ch0_ok = (id->driver_data != 0);
|
|
|
|
rc = pcim_enable_device(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
if (id->driver_data == 0) /* 643 */
|
|
ata_pci_bmdma_clear_simplex(pdev);
|
|
|
|
if (pdev->device == PCI_DEVICE_ID_CMD_646) {
|
|
/* Does UDMA work ? */
|
|
if (pdev->revision > 4) {
|
|
ppi[0] = &cmd_info[2];
|
|
ppi[1] = &cmd_info[2];
|
|
}
|
|
/* Early rev with other problems ? */
|
|
else if (pdev->revision == 1) {
|
|
ppi[0] = &cmd_info[3];
|
|
ppi[1] = &cmd_info[3];
|
|
}
|
|
/* revs 1,2 have no CNTRL_CH0 */
|
|
if (pdev->revision < 3)
|
|
cntrl_ch0_ok = 0;
|
|
}
|
|
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
|
|
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
|
|
mrdmode &= ~ 0x30; /* IRQ set up */
|
|
mrdmode |= 0x02; /* Memory read line enable */
|
|
pci_write_config_byte(pdev, MRDMODE, mrdmode);
|
|
|
|
/* check for enabled ports */
|
|
pci_read_config_byte(pdev, CNTRL, ®);
|
|
if (!port_ok)
|
|
dev_printk(KERN_NOTICE, &pdev->dev, "Mobility Bridge detected, ignoring CNTRL port enable/disable\n");
|
|
if (port_ok && cntrl_ch0_ok && !(reg & CNTRL_CH0)) {
|
|
dev_printk(KERN_NOTICE, &pdev->dev, "Primary port is disabled\n");
|
|
ppi[0] = &ata_dummy_port_info;
|
|
|
|
}
|
|
if (port_ok && !(reg & CNTRL_CH1)) {
|
|
dev_printk(KERN_NOTICE, &pdev->dev, "Secondary port is disabled\n");
|
|
ppi[1] = &ata_dummy_port_info;
|
|
}
|
|
|
|
/* Force PIO 0 here.. */
|
|
|
|
/* PPC specific fixup copied from old driver */
|
|
#ifdef CONFIG_PPC
|
|
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
|
|
#endif
|
|
|
|
return ata_pci_bmdma_init_one(pdev, ppi, &cmd64x_sht, NULL, 0);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int cmd64x_reinit_one(struct pci_dev *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
u8 mrdmode;
|
|
int rc;
|
|
|
|
rc = ata_pci_device_do_resume(pdev);
|
|
if (rc)
|
|
return rc;
|
|
|
|
pci_write_config_byte(pdev, PCI_LATENCY_TIMER, 64);
|
|
pci_read_config_byte(pdev, MRDMODE, &mrdmode);
|
|
mrdmode &= ~ 0x30; /* IRQ set up */
|
|
mrdmode |= 0x02; /* Memory read line enable */
|
|
pci_write_config_byte(pdev, MRDMODE, mrdmode);
|
|
#ifdef CONFIG_PPC
|
|
pci_write_config_byte(pdev, UDIDETCR0, 0xF0);
|
|
#endif
|
|
ata_host_resume(host);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct pci_device_id cmd64x[] = {
|
|
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
|
|
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
|
|
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 4 },
|
|
{ PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 5 },
|
|
|
|
{ },
|
|
};
|
|
|
|
static struct pci_driver cmd64x_pci_driver = {
|
|
.name = DRV_NAME,
|
|
.id_table = cmd64x,
|
|
.probe = cmd64x_init_one,
|
|
.remove = ata_pci_remove_one,
|
|
#ifdef CONFIG_PM
|
|
.suspend = ata_pci_device_suspend,
|
|
.resume = cmd64x_reinit_one,
|
|
#endif
|
|
};
|
|
|
|
static int __init cmd64x_init(void)
|
|
{
|
|
return pci_register_driver(&cmd64x_pci_driver);
|
|
}
|
|
|
|
static void __exit cmd64x_exit(void)
|
|
{
|
|
pci_unregister_driver(&cmd64x_pci_driver);
|
|
}
|
|
|
|
MODULE_AUTHOR("Alan Cox");
|
|
MODULE_DESCRIPTION("low-level driver for CMD64x series PATA controllers");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DEVICE_TABLE(pci, cmd64x);
|
|
MODULE_VERSION(DRV_VERSION);
|
|
|
|
module_init(cmd64x_init);
|
|
module_exit(cmd64x_exit);
|