mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 07:01:57 +00:00
83db373853
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes:c27e917e2b
("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by: Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181016023752.9285-1-lucas.demarchi@intel.com (cherry picked from commitbb1c7edc6d
) Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
3897 lines
117 KiB
C
3897 lines
117 KiB
C
/*
|
|
* Copyright © 2012 Intel Corporation
|
|
*
|
|
* Permission is hereby granted, free of charge, to any person obtaining a
|
|
* copy of this software and associated documentation files (the "Software"),
|
|
* to deal in the Software without restriction, including without limitation
|
|
* the rights to use, copy, modify, merge, publish, distribute, sublicense,
|
|
* and/or sell copies of the Software, and to permit persons to whom the
|
|
* Software is furnished to do so, subject to the following conditions:
|
|
*
|
|
* The above copyright notice and this permission notice (including the next
|
|
* paragraph) shall be included in all copies or substantial portions of the
|
|
* Software.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
|
|
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
|
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
|
|
* IN THE SOFTWARE.
|
|
*
|
|
* Authors:
|
|
* Eugeni Dodonov <eugeni.dodonov@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <drm/drm_scdc_helper.h>
|
|
#include "i915_drv.h"
|
|
#include "intel_drv.h"
|
|
|
|
struct ddi_buf_trans {
|
|
u32 trans1; /* balance leg enable, de-emph level */
|
|
u32 trans2; /* vref sel, vswing */
|
|
u8 i_boost; /* SKL: I_boost; valid: 0x0, 0x1, 0x3, 0x7 */
|
|
};
|
|
|
|
static const u8 index_to_dp_signal_levels[] = {
|
|
[0] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_0,
|
|
[1] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_1,
|
|
[2] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_2,
|
|
[3] = DP_TRAIN_VOLTAGE_SWING_LEVEL_0 | DP_TRAIN_PRE_EMPH_LEVEL_3,
|
|
[4] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_0,
|
|
[5] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_1,
|
|
[6] = DP_TRAIN_VOLTAGE_SWING_LEVEL_1 | DP_TRAIN_PRE_EMPH_LEVEL_2,
|
|
[7] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_0,
|
|
[8] = DP_TRAIN_VOLTAGE_SWING_LEVEL_2 | DP_TRAIN_PRE_EMPH_LEVEL_1,
|
|
[9] = DP_TRAIN_VOLTAGE_SWING_LEVEL_3 | DP_TRAIN_PRE_EMPH_LEVEL_0,
|
|
};
|
|
|
|
/* HDMI/DVI modes ignore everything but the last 2 items. So we share
|
|
* them for both DP and FDI transports, allowing those ports to
|
|
* automatically adapt to HDMI connections as well
|
|
*/
|
|
static const struct ddi_buf_trans hsw_ddi_translations_dp[] = {
|
|
{ 0x00FFFFFF, 0x0006000E, 0x0 },
|
|
{ 0x00D75FFF, 0x0005000A, 0x0 },
|
|
{ 0x00C30FFF, 0x00040006, 0x0 },
|
|
{ 0x80AAAFFF, 0x000B0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x0005000A, 0x0 },
|
|
{ 0x00D75FFF, 0x000C0004, 0x0 },
|
|
{ 0x80C30FFF, 0x000B0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x00040006, 0x0 },
|
|
{ 0x80D75FFF, 0x000B0000, 0x0 },
|
|
};
|
|
|
|
static const struct ddi_buf_trans hsw_ddi_translations_fdi[] = {
|
|
{ 0x00FFFFFF, 0x0007000E, 0x0 },
|
|
{ 0x00D75FFF, 0x000F000A, 0x0 },
|
|
{ 0x00C30FFF, 0x00060006, 0x0 },
|
|
{ 0x00AAAFFF, 0x001E0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x000F000A, 0x0 },
|
|
{ 0x00D75FFF, 0x00160004, 0x0 },
|
|
{ 0x00C30FFF, 0x001E0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x00060006, 0x0 },
|
|
{ 0x00D75FFF, 0x001E0000, 0x0 },
|
|
};
|
|
|
|
static const struct ddi_buf_trans hsw_ddi_translations_hdmi[] = {
|
|
/* Idx NT mV d T mV d db */
|
|
{ 0x00FFFFFF, 0x0006000E, 0x0 },/* 0: 400 400 0 */
|
|
{ 0x00E79FFF, 0x000E000C, 0x0 },/* 1: 400 500 2 */
|
|
{ 0x00D75FFF, 0x0005000A, 0x0 },/* 2: 400 600 3.5 */
|
|
{ 0x00FFFFFF, 0x0005000A, 0x0 },/* 3: 600 600 0 */
|
|
{ 0x00E79FFF, 0x001D0007, 0x0 },/* 4: 600 750 2 */
|
|
{ 0x00D75FFF, 0x000C0004, 0x0 },/* 5: 600 900 3.5 */
|
|
{ 0x00FFFFFF, 0x00040006, 0x0 },/* 6: 800 800 0 */
|
|
{ 0x80E79FFF, 0x00030002, 0x0 },/* 7: 800 1000 2 */
|
|
{ 0x00FFFFFF, 0x00140005, 0x0 },/* 8: 850 850 0 */
|
|
{ 0x00FFFFFF, 0x000C0004, 0x0 },/* 9: 900 900 0 */
|
|
{ 0x00FFFFFF, 0x001C0003, 0x0 },/* 10: 950 950 0 */
|
|
{ 0x80FFFFFF, 0x00030002, 0x0 },/* 11: 1000 1000 0 */
|
|
};
|
|
|
|
static const struct ddi_buf_trans bdw_ddi_translations_edp[] = {
|
|
{ 0x00FFFFFF, 0x00000012, 0x0 },
|
|
{ 0x00EBAFFF, 0x00020011, 0x0 },
|
|
{ 0x00C71FFF, 0x0006000F, 0x0 },
|
|
{ 0x00AAAFFF, 0x000E000A, 0x0 },
|
|
{ 0x00FFFFFF, 0x00020011, 0x0 },
|
|
{ 0x00DB6FFF, 0x0005000F, 0x0 },
|
|
{ 0x00BEEFFF, 0x000A000C, 0x0 },
|
|
{ 0x00FFFFFF, 0x0005000F, 0x0 },
|
|
{ 0x00DB6FFF, 0x000A000C, 0x0 },
|
|
};
|
|
|
|
static const struct ddi_buf_trans bdw_ddi_translations_dp[] = {
|
|
{ 0x00FFFFFF, 0x0007000E, 0x0 },
|
|
{ 0x00D75FFF, 0x000E000A, 0x0 },
|
|
{ 0x00BEFFFF, 0x00140006, 0x0 },
|
|
{ 0x80B2CFFF, 0x001B0002, 0x0 },
|
|
{ 0x00FFFFFF, 0x000E000A, 0x0 },
|
|
{ 0x00DB6FFF, 0x00160005, 0x0 },
|
|
{ 0x80C71FFF, 0x001A0002, 0x0 },
|
|
{ 0x00F7DFFF, 0x00180004, 0x0 },
|
|
{ 0x80D75FFF, 0x001B0002, 0x0 },
|
|
};
|
|
|
|
static const struct ddi_buf_trans bdw_ddi_translations_fdi[] = {
|
|
{ 0x00FFFFFF, 0x0001000E, 0x0 },
|
|
{ 0x00D75FFF, 0x0004000A, 0x0 },
|
|
{ 0x00C30FFF, 0x00070006, 0x0 },
|
|
{ 0x00AAAFFF, 0x000C0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x0004000A, 0x0 },
|
|
{ 0x00D75FFF, 0x00090004, 0x0 },
|
|
{ 0x00C30FFF, 0x000C0000, 0x0 },
|
|
{ 0x00FFFFFF, 0x00070006, 0x0 },
|
|
{ 0x00D75FFF, 0x000C0000, 0x0 },
|
|
};
|
|
|
|
static const struct ddi_buf_trans bdw_ddi_translations_hdmi[] = {
|
|
/* Idx NT mV d T mV df db */
|
|
{ 0x00FFFFFF, 0x0007000E, 0x0 },/* 0: 400 400 0 */
|
|
{ 0x00D75FFF, 0x000E000A, 0x0 },/* 1: 400 600 3.5 */
|
|
{ 0x00BEFFFF, 0x00140006, 0x0 },/* 2: 400 800 6 */
|
|
{ 0x00FFFFFF, 0x0009000D, 0x0 },/* 3: 450 450 0 */
|
|
{ 0x00FFFFFF, 0x000E000A, 0x0 },/* 4: 600 600 0 */
|
|
{ 0x00D7FFFF, 0x00140006, 0x0 },/* 5: 600 800 2.5 */
|
|
{ 0x80CB2FFF, 0x001B0002, 0x0 },/* 6: 600 1000 4.5 */
|
|
{ 0x00FFFFFF, 0x00140006, 0x0 },/* 7: 800 800 0 */
|
|
{ 0x80E79FFF, 0x001B0002, 0x0 },/* 8: 800 1000 2 */
|
|
{ 0x80FFFFFF, 0x001B0002, 0x0 },/* 9: 1000 1000 0 */
|
|
};
|
|
|
|
/* Skylake H and S */
|
|
static const struct ddi_buf_trans skl_ddi_translations_dp[] = {
|
|
{ 0x00002016, 0x000000A0, 0x0 },
|
|
{ 0x00005012, 0x0000009B, 0x0 },
|
|
{ 0x00007011, 0x00000088, 0x0 },
|
|
{ 0x80009010, 0x000000C0, 0x1 },
|
|
{ 0x00002016, 0x0000009B, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000C0, 0x1 },
|
|
{ 0x00002016, 0x000000DF, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x1 },
|
|
};
|
|
|
|
/* Skylake U */
|
|
static const struct ddi_buf_trans skl_u_ddi_translations_dp[] = {
|
|
{ 0x0000201B, 0x000000A2, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000CD, 0x1 },
|
|
{ 0x80009010, 0x000000C0, 0x1 },
|
|
{ 0x0000201B, 0x0000009D, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x1 },
|
|
{ 0x80007011, 0x000000C0, 0x1 },
|
|
{ 0x00002016, 0x00000088, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x1 },
|
|
};
|
|
|
|
/* Skylake Y */
|
|
static const struct ddi_buf_trans skl_y_ddi_translations_dp[] = {
|
|
{ 0x00000018, 0x000000A2, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000CD, 0x3 },
|
|
{ 0x80009010, 0x000000C0, 0x3 },
|
|
{ 0x00000018, 0x0000009D, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
{ 0x80007011, 0x000000C0, 0x3 },
|
|
{ 0x00000018, 0x00000088, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
};
|
|
|
|
/* Kabylake H and S */
|
|
static const struct ddi_buf_trans kbl_ddi_translations_dp[] = {
|
|
{ 0x00002016, 0x000000A0, 0x0 },
|
|
{ 0x00005012, 0x0000009B, 0x0 },
|
|
{ 0x00007011, 0x00000088, 0x0 },
|
|
{ 0x80009010, 0x000000C0, 0x1 },
|
|
{ 0x00002016, 0x0000009B, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000C0, 0x1 },
|
|
{ 0x00002016, 0x00000097, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x1 },
|
|
};
|
|
|
|
/* Kabylake U */
|
|
static const struct ddi_buf_trans kbl_u_ddi_translations_dp[] = {
|
|
{ 0x0000201B, 0x000000A1, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000CD, 0x3 },
|
|
{ 0x80009010, 0x000000C0, 0x3 },
|
|
{ 0x0000201B, 0x0000009D, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
{ 0x80007011, 0x000000C0, 0x3 },
|
|
{ 0x00002016, 0x0000004F, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
};
|
|
|
|
/* Kabylake Y */
|
|
static const struct ddi_buf_trans kbl_y_ddi_translations_dp[] = {
|
|
{ 0x00001017, 0x000000A1, 0x0 },
|
|
{ 0x00005012, 0x00000088, 0x0 },
|
|
{ 0x80007011, 0x000000CD, 0x3 },
|
|
{ 0x8000800F, 0x000000C0, 0x3 },
|
|
{ 0x00001017, 0x0000009D, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
{ 0x80007011, 0x000000C0, 0x3 },
|
|
{ 0x00001017, 0x0000004C, 0x0 },
|
|
{ 0x80005012, 0x000000C0, 0x3 },
|
|
};
|
|
|
|
/*
|
|
* Skylake/Kabylake H and S
|
|
* eDP 1.4 low vswing translation parameters
|
|
*/
|
|
static const struct ddi_buf_trans skl_ddi_translations_edp[] = {
|
|
{ 0x00000018, 0x000000A8, 0x0 },
|
|
{ 0x00004013, 0x000000A9, 0x0 },
|
|
{ 0x00007011, 0x000000A2, 0x0 },
|
|
{ 0x00009010, 0x0000009C, 0x0 },
|
|
{ 0x00000018, 0x000000A9, 0x0 },
|
|
{ 0x00006013, 0x000000A2, 0x0 },
|
|
{ 0x00007011, 0x000000A6, 0x0 },
|
|
{ 0x00000018, 0x000000AB, 0x0 },
|
|
{ 0x00007013, 0x0000009F, 0x0 },
|
|
{ 0x00000018, 0x000000DF, 0x0 },
|
|
};
|
|
|
|
/*
|
|
* Skylake/Kabylake U
|
|
* eDP 1.4 low vswing translation parameters
|
|
*/
|
|
static const struct ddi_buf_trans skl_u_ddi_translations_edp[] = {
|
|
{ 0x00000018, 0x000000A8, 0x0 },
|
|
{ 0x00004013, 0x000000A9, 0x0 },
|
|
{ 0x00007011, 0x000000A2, 0x0 },
|
|
{ 0x00009010, 0x0000009C, 0x0 },
|
|
{ 0x00000018, 0x000000A9, 0x0 },
|
|
{ 0x00006013, 0x000000A2, 0x0 },
|
|
{ 0x00007011, 0x000000A6, 0x0 },
|
|
{ 0x00002016, 0x000000AB, 0x0 },
|
|
{ 0x00005013, 0x0000009F, 0x0 },
|
|
{ 0x00000018, 0x000000DF, 0x0 },
|
|
};
|
|
|
|
/*
|
|
* Skylake/Kabylake Y
|
|
* eDP 1.4 low vswing translation parameters
|
|
*/
|
|
static const struct ddi_buf_trans skl_y_ddi_translations_edp[] = {
|
|
{ 0x00000018, 0x000000A8, 0x0 },
|
|
{ 0x00004013, 0x000000AB, 0x0 },
|
|
{ 0x00007011, 0x000000A4, 0x0 },
|
|
{ 0x00009010, 0x000000DF, 0x0 },
|
|
{ 0x00000018, 0x000000AA, 0x0 },
|
|
{ 0x00006013, 0x000000A4, 0x0 },
|
|
{ 0x00007011, 0x0000009D, 0x0 },
|
|
{ 0x00000018, 0x000000A0, 0x0 },
|
|
{ 0x00006012, 0x000000DF, 0x0 },
|
|
{ 0x00000018, 0x0000008A, 0x0 },
|
|
};
|
|
|
|
/* Skylake/Kabylake U, H and S */
|
|
static const struct ddi_buf_trans skl_ddi_translations_hdmi[] = {
|
|
{ 0x00000018, 0x000000AC, 0x0 },
|
|
{ 0x00005012, 0x0000009D, 0x0 },
|
|
{ 0x00007011, 0x00000088, 0x0 },
|
|
{ 0x00000018, 0x000000A1, 0x0 },
|
|
{ 0x00000018, 0x00000098, 0x0 },
|
|
{ 0x00004013, 0x00000088, 0x0 },
|
|
{ 0x80006012, 0x000000CD, 0x1 },
|
|
{ 0x00000018, 0x000000DF, 0x0 },
|
|
{ 0x80003015, 0x000000CD, 0x1 }, /* Default */
|
|
{ 0x80003015, 0x000000C0, 0x1 },
|
|
{ 0x80000018, 0x000000C0, 0x1 },
|
|
};
|
|
|
|
/* Skylake/Kabylake Y */
|
|
static const struct ddi_buf_trans skl_y_ddi_translations_hdmi[] = {
|
|
{ 0x00000018, 0x000000A1, 0x0 },
|
|
{ 0x00005012, 0x000000DF, 0x0 },
|
|
{ 0x80007011, 0x000000CB, 0x3 },
|
|
{ 0x00000018, 0x000000A4, 0x0 },
|
|
{ 0x00000018, 0x0000009D, 0x0 },
|
|
{ 0x00004013, 0x00000080, 0x0 },
|
|
{ 0x80006013, 0x000000C0, 0x3 },
|
|
{ 0x00000018, 0x0000008A, 0x0 },
|
|
{ 0x80003015, 0x000000C0, 0x3 }, /* Default */
|
|
{ 0x80003015, 0x000000C0, 0x3 },
|
|
{ 0x80000018, 0x000000C0, 0x3 },
|
|
};
|
|
|
|
struct bxt_ddi_buf_trans {
|
|
u8 margin; /* swing value */
|
|
u8 scale; /* scale value */
|
|
u8 enable; /* scale enable */
|
|
u8 deemphasis;
|
|
};
|
|
|
|
static const struct bxt_ddi_buf_trans bxt_ddi_translations_dp[] = {
|
|
/* Idx NT mV diff db */
|
|
{ 52, 0x9A, 0, 128, }, /* 0: 400 0 */
|
|
{ 78, 0x9A, 0, 85, }, /* 1: 400 3.5 */
|
|
{ 104, 0x9A, 0, 64, }, /* 2: 400 6 */
|
|
{ 154, 0x9A, 0, 43, }, /* 3: 400 9.5 */
|
|
{ 77, 0x9A, 0, 128, }, /* 4: 600 0 */
|
|
{ 116, 0x9A, 0, 85, }, /* 5: 600 3.5 */
|
|
{ 154, 0x9A, 0, 64, }, /* 6: 600 6 */
|
|
{ 102, 0x9A, 0, 128, }, /* 7: 800 0 */
|
|
{ 154, 0x9A, 0, 85, }, /* 8: 800 3.5 */
|
|
{ 154, 0x9A, 1, 128, }, /* 9: 1200 0 */
|
|
};
|
|
|
|
static const struct bxt_ddi_buf_trans bxt_ddi_translations_edp[] = {
|
|
/* Idx NT mV diff db */
|
|
{ 26, 0, 0, 128, }, /* 0: 200 0 */
|
|
{ 38, 0, 0, 112, }, /* 1: 200 1.5 */
|
|
{ 48, 0, 0, 96, }, /* 2: 200 4 */
|
|
{ 54, 0, 0, 69, }, /* 3: 200 6 */
|
|
{ 32, 0, 0, 128, }, /* 4: 250 0 */
|
|
{ 48, 0, 0, 104, }, /* 5: 250 1.5 */
|
|
{ 54, 0, 0, 85, }, /* 6: 250 4 */
|
|
{ 43, 0, 0, 128, }, /* 7: 300 0 */
|
|
{ 54, 0, 0, 101, }, /* 8: 300 1.5 */
|
|
{ 48, 0, 0, 128, }, /* 9: 300 0 */
|
|
};
|
|
|
|
/* BSpec has 2 recommended values - entries 0 and 8.
|
|
* Using the entry with higher vswing.
|
|
*/
|
|
static const struct bxt_ddi_buf_trans bxt_ddi_translations_hdmi[] = {
|
|
/* Idx NT mV diff db */
|
|
{ 52, 0x9A, 0, 128, }, /* 0: 400 0 */
|
|
{ 52, 0x9A, 0, 85, }, /* 1: 400 3.5 */
|
|
{ 52, 0x9A, 0, 64, }, /* 2: 400 6 */
|
|
{ 42, 0x9A, 0, 43, }, /* 3: 400 9.5 */
|
|
{ 77, 0x9A, 0, 128, }, /* 4: 600 0 */
|
|
{ 77, 0x9A, 0, 85, }, /* 5: 600 3.5 */
|
|
{ 77, 0x9A, 0, 64, }, /* 6: 600 6 */
|
|
{ 102, 0x9A, 0, 128, }, /* 7: 800 0 */
|
|
{ 102, 0x9A, 0, 85, }, /* 8: 800 3.5 */
|
|
{ 154, 0x9A, 1, 128, }, /* 9: 1200 0 */
|
|
};
|
|
|
|
struct cnl_ddi_buf_trans {
|
|
u8 dw2_swing_sel;
|
|
u8 dw7_n_scalar;
|
|
u8 dw4_cursor_coeff;
|
|
u8 dw4_post_cursor_2;
|
|
u8 dw4_post_cursor_1;
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.85V for DP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_85V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
|
|
{ 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */
|
|
{ 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */
|
|
{ 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */
|
|
{ 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
|
|
{ 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */
|
|
{ 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */
|
|
{ 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */
|
|
{ 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */
|
|
{ 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.85V for HDMI */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_85V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x60, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
|
|
{ 0xB, 0x73, 0x36, 0x00, 0x09 }, /* 450 650 3.2 */
|
|
{ 0x6, 0x7F, 0x31, 0x00, 0x0E }, /* 450 850 5.5 */
|
|
{ 0xB, 0x73, 0x3F, 0x00, 0x00 }, /* 650 650 0.0 */
|
|
{ 0x6, 0x7F, 0x37, 0x00, 0x08 }, /* 650 850 2.3 */
|
|
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 850 850 0.0 */
|
|
{ 0x6, 0x7F, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.85V for eDP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_85V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x66, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
|
|
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
|
|
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
|
|
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
|
|
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
|
|
{ 0xA, 0x66, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
|
|
{ 0xB, 0x70, 0x3C, 0x00, 0x03 }, /* 460 600 2.3 */
|
|
{ 0xC, 0x75, 0x3C, 0x00, 0x03 }, /* 537 700 2.3 */
|
|
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.95V for DP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_0_95V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x5D, 0x3F, 0x00, 0x00 }, /* 350 350 0.0 */
|
|
{ 0xA, 0x6A, 0x38, 0x00, 0x07 }, /* 350 500 3.1 */
|
|
{ 0xB, 0x7A, 0x32, 0x00, 0x0D }, /* 350 700 6.0 */
|
|
{ 0x6, 0x7C, 0x2D, 0x00, 0x12 }, /* 350 900 8.2 */
|
|
{ 0xA, 0x69, 0x3F, 0x00, 0x00 }, /* 500 500 0.0 */
|
|
{ 0xB, 0x7A, 0x36, 0x00, 0x09 }, /* 500 700 2.9 */
|
|
{ 0x6, 0x7C, 0x30, 0x00, 0x0F }, /* 500 900 5.1 */
|
|
{ 0xB, 0x7D, 0x3C, 0x00, 0x03 }, /* 650 725 0.9 */
|
|
{ 0x6, 0x7C, 0x34, 0x00, 0x0B }, /* 600 900 3.5 */
|
|
{ 0x6, 0x7B, 0x3F, 0x00, 0x00 }, /* 900 900 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.95V for HDMI */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_0_95V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x5C, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
{ 0xB, 0x69, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
|
|
{ 0x5, 0x76, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
|
|
{ 0xA, 0x5E, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
|
|
{ 0xB, 0x69, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
|
|
{ 0xB, 0x79, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
|
|
{ 0x6, 0x7D, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */
|
|
{ 0x5, 0x76, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */
|
|
{ 0x6, 0x7D, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */
|
|
{ 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */
|
|
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.95V for eDP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_0_95V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x61, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
|
|
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
|
|
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
|
|
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
|
|
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
|
|
{ 0xA, 0x61, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
|
|
{ 0xB, 0x68, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */
|
|
{ 0xC, 0x6E, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */
|
|
{ 0x4, 0x7F, 0x3A, 0x00, 0x05 }, /* 460 600 2.3 */
|
|
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 1.05V for DP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_dp_1_05V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
{ 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
|
|
{ 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
|
|
{ 0x6, 0x7F, 0x2C, 0x00, 0x13 }, /* 400 1050 8.4 */
|
|
{ 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
|
|
{ 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
|
|
{ 0x6, 0x7F, 0x30, 0x00, 0x0F }, /* 550 1050 5.6 */
|
|
{ 0x5, 0x76, 0x3E, 0x00, 0x01 }, /* 850 900 0.5 */
|
|
{ 0x6, 0x7F, 0x36, 0x00, 0x09 }, /* 750 1050 2.9 */
|
|
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 1.05V for HDMI */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_hdmi_1_05V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x58, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
{ 0xB, 0x64, 0x37, 0x00, 0x08 }, /* 400 600 3.5 */
|
|
{ 0x5, 0x70, 0x31, 0x00, 0x0E }, /* 400 800 6.0 */
|
|
{ 0xA, 0x5B, 0x3F, 0x00, 0x00 }, /* 450 450 0.0 */
|
|
{ 0xB, 0x64, 0x3F, 0x00, 0x00 }, /* 600 600 0.0 */
|
|
{ 0x5, 0x73, 0x35, 0x00, 0x0A }, /* 600 850 3.0 */
|
|
{ 0x6, 0x7C, 0x32, 0x00, 0x0D }, /* 600 1000 4.4 */
|
|
{ 0x5, 0x70, 0x3F, 0x00, 0x00 }, /* 800 800 0.0 */
|
|
{ 0x6, 0x7C, 0x39, 0x00, 0x06 }, /* 800 1000 1.9 */
|
|
{ 0x6, 0x7F, 0x39, 0x00, 0x06 }, /* 850 1050 1.8 */
|
|
{ 0x6, 0x7F, 0x3F, 0x00, 0x00 }, /* 1050 1050 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 1.05V for eDP */
|
|
static const struct cnl_ddi_buf_trans cnl_ddi_translations_edp_1_05V[] = {
|
|
/* NT mV Trans mV db */
|
|
{ 0xA, 0x5E, 0x3A, 0x00, 0x05 }, /* 384 500 2.3 */
|
|
{ 0x0, 0x7F, 0x38, 0x00, 0x07 }, /* 153 200 2.3 */
|
|
{ 0x8, 0x7F, 0x38, 0x00, 0x07 }, /* 192 250 2.3 */
|
|
{ 0x1, 0x7F, 0x38, 0x00, 0x07 }, /* 230 300 2.3 */
|
|
{ 0x9, 0x7F, 0x38, 0x00, 0x07 }, /* 269 350 2.3 */
|
|
{ 0xA, 0x5E, 0x3C, 0x00, 0x03 }, /* 446 500 1.0 */
|
|
{ 0xB, 0x64, 0x39, 0x00, 0x06 }, /* 460 600 2.3 */
|
|
{ 0xE, 0x6A, 0x39, 0x00, 0x06 }, /* 537 700 2.3 */
|
|
{ 0x2, 0x7F, 0x3F, 0x00, 0x00 }, /* 400 400 0.0 */
|
|
};
|
|
|
|
struct icl_combo_phy_ddi_buf_trans {
|
|
u32 dw2_swing_select;
|
|
u32 dw2_swing_scalar;
|
|
u32 dw4_scaling;
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.85V for DP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_85V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
|
|
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
|
|
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
|
|
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
|
|
{ 0xB, 0x70, 0x0018 }, /* 600 0.0 */
|
|
{ 0xB, 0x70, 0x3015 }, /* 600 3.5 */
|
|
{ 0xB, 0x70, 0x6012 }, /* 600 6.0 */
|
|
{ 0x5, 0x00, 0x0018 }, /* 800 0.0 */
|
|
{ 0x5, 0x00, 0x3015 }, /* 800 3.5 */
|
|
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
|
|
};
|
|
|
|
/* FIXME - After table is updated in Bspec */
|
|
/* Voltage Swing Programming for VccIO 0.85V for eDP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_85V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 0.95V for DP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_0_95V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
|
|
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
|
|
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
|
|
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
|
|
{ 0x4, 0x98, 0x0018 }, /* 600 0.0 */
|
|
{ 0x4, 0x98, 0x3015 }, /* 600 3.5 */
|
|
{ 0x4, 0x98, 0x6012 }, /* 600 6.0 */
|
|
{ 0x5, 0x76, 0x0018 }, /* 800 0.0 */
|
|
{ 0x5, 0x76, 0x3015 }, /* 800 3.5 */
|
|
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
|
|
};
|
|
|
|
/* FIXME - After table is updated in Bspec */
|
|
/* Voltage Swing Programming for VccIO 0.95V for eDP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_0_95V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
|
|
};
|
|
|
|
/* Voltage Swing Programming for VccIO 1.05V for DP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_dp_hdmi_1_05V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x2, 0x98, 0x0018 }, /* 400 0.0 */
|
|
{ 0x2, 0x98, 0x3015 }, /* 400 3.5 */
|
|
{ 0x2, 0x98, 0x6012 }, /* 400 6.0 */
|
|
{ 0x2, 0x98, 0x900F }, /* 400 9.5 */
|
|
{ 0x4, 0x98, 0x0018 }, /* 600 0.0 */
|
|
{ 0x4, 0x98, 0x3015 }, /* 600 3.5 */
|
|
{ 0x4, 0x98, 0x6012 }, /* 600 6.0 */
|
|
{ 0x5, 0x71, 0x0018 }, /* 800 0.0 */
|
|
{ 0x5, 0x71, 0x3015 }, /* 800 3.5 */
|
|
{ 0x6, 0x98, 0x0018 }, /* 1200 0.0 */
|
|
};
|
|
|
|
/* FIXME - After table is updated in Bspec */
|
|
/* Voltage Swing Programming for VccIO 1.05V for eDP */
|
|
static const struct icl_combo_phy_ddi_buf_trans icl_combo_phy_ddi_translations_edp_1_05V[] = {
|
|
/* Voltage mV db */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 200 6.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 250 4.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 0.0 */
|
|
{ 0x0, 0x00, 0x00 }, /* 300 1.5 */
|
|
{ 0x0, 0x00, 0x00 }, /* 350 0.0 */
|
|
};
|
|
|
|
struct icl_mg_phy_ddi_buf_trans {
|
|
u32 cri_txdeemph_override_5_0;
|
|
u32 cri_txdeemph_override_11_6;
|
|
u32 cri_txdeemph_override_17_12;
|
|
};
|
|
|
|
static const struct icl_mg_phy_ddi_buf_trans icl_mg_phy_ddi_translations[] = {
|
|
/* Voltage swing pre-emphasis */
|
|
{ 0x0, 0x1B, 0x00 }, /* 0 0 */
|
|
{ 0x0, 0x23, 0x08 }, /* 0 1 */
|
|
{ 0x0, 0x2D, 0x12 }, /* 0 2 */
|
|
{ 0x0, 0x00, 0x00 }, /* 0 3 */
|
|
{ 0x0, 0x23, 0x00 }, /* 1 0 */
|
|
{ 0x0, 0x2B, 0x09 }, /* 1 1 */
|
|
{ 0x0, 0x2E, 0x11 }, /* 1 2 */
|
|
{ 0x0, 0x2F, 0x00 }, /* 2 0 */
|
|
{ 0x0, 0x33, 0x0C }, /* 2 1 */
|
|
{ 0x0, 0x00, 0x00 }, /* 3 0 */
|
|
};
|
|
|
|
static const struct ddi_buf_trans *
|
|
bdw_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (dev_priv->vbt.edp.low_vswing) {
|
|
*n_entries = ARRAY_SIZE(bdw_ddi_translations_edp);
|
|
return bdw_ddi_translations_edp;
|
|
} else {
|
|
*n_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
|
|
return bdw_ddi_translations_dp;
|
|
}
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
skl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (IS_SKL_ULX(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_dp);
|
|
return skl_y_ddi_translations_dp;
|
|
} else if (IS_SKL_ULT(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(skl_u_ddi_translations_dp);
|
|
return skl_u_ddi_translations_dp;
|
|
} else {
|
|
*n_entries = ARRAY_SIZE(skl_ddi_translations_dp);
|
|
return skl_ddi_translations_dp;
|
|
}
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
kbl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (IS_KBL_ULX(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(kbl_y_ddi_translations_dp);
|
|
return kbl_y_ddi_translations_dp;
|
|
} else if (IS_KBL_ULT(dev_priv) || IS_CFL_ULT(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(kbl_u_ddi_translations_dp);
|
|
return kbl_u_ddi_translations_dp;
|
|
} else {
|
|
*n_entries = ARRAY_SIZE(kbl_ddi_translations_dp);
|
|
return kbl_ddi_translations_dp;
|
|
}
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
skl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (dev_priv->vbt.edp.low_vswing) {
|
|
if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_edp);
|
|
return skl_y_ddi_translations_edp;
|
|
} else if (IS_SKL_ULT(dev_priv) || IS_KBL_ULT(dev_priv) ||
|
|
IS_CFL_ULT(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(skl_u_ddi_translations_edp);
|
|
return skl_u_ddi_translations_edp;
|
|
} else {
|
|
*n_entries = ARRAY_SIZE(skl_ddi_translations_edp);
|
|
return skl_ddi_translations_edp;
|
|
}
|
|
}
|
|
|
|
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv))
|
|
return kbl_get_buf_trans_dp(dev_priv, n_entries);
|
|
else
|
|
return skl_get_buf_trans_dp(dev_priv, n_entries);
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
skl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (IS_SKL_ULX(dev_priv) || IS_KBL_ULX(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(skl_y_ddi_translations_hdmi);
|
|
return skl_y_ddi_translations_hdmi;
|
|
} else {
|
|
*n_entries = ARRAY_SIZE(skl_ddi_translations_hdmi);
|
|
return skl_ddi_translations_hdmi;
|
|
}
|
|
}
|
|
|
|
static int skl_buf_trans_num_entries(enum port port, int n_entries)
|
|
{
|
|
/* Only DDIA and DDIE can select the 10th register with DP */
|
|
if (port == PORT_A || port == PORT_E)
|
|
return min(n_entries, 10);
|
|
else
|
|
return min(n_entries, 9);
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
intel_ddi_get_buf_trans_dp(struct drm_i915_private *dev_priv,
|
|
enum port port, int *n_entries)
|
|
{
|
|
if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
|
|
const struct ddi_buf_trans *ddi_translations =
|
|
kbl_get_buf_trans_dp(dev_priv, n_entries);
|
|
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
|
|
return ddi_translations;
|
|
} else if (IS_SKYLAKE(dev_priv)) {
|
|
const struct ddi_buf_trans *ddi_translations =
|
|
skl_get_buf_trans_dp(dev_priv, n_entries);
|
|
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
|
|
return ddi_translations;
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(bdw_ddi_translations_dp);
|
|
return bdw_ddi_translations_dp;
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
|
|
return hsw_ddi_translations_dp;
|
|
}
|
|
|
|
*n_entries = 0;
|
|
return NULL;
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
intel_ddi_get_buf_trans_edp(struct drm_i915_private *dev_priv,
|
|
enum port port, int *n_entries)
|
|
{
|
|
if (IS_GEN9_BC(dev_priv)) {
|
|
const struct ddi_buf_trans *ddi_translations =
|
|
skl_get_buf_trans_edp(dev_priv, n_entries);
|
|
*n_entries = skl_buf_trans_num_entries(port, *n_entries);
|
|
return ddi_translations;
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
return bdw_get_buf_trans_edp(dev_priv, n_entries);
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(hsw_ddi_translations_dp);
|
|
return hsw_ddi_translations_dp;
|
|
}
|
|
|
|
*n_entries = 0;
|
|
return NULL;
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
intel_ddi_get_buf_trans_fdi(struct drm_i915_private *dev_priv,
|
|
int *n_entries)
|
|
{
|
|
if (IS_BROADWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(bdw_ddi_translations_fdi);
|
|
return bdw_ddi_translations_fdi;
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(hsw_ddi_translations_fdi);
|
|
return hsw_ddi_translations_fdi;
|
|
}
|
|
|
|
*n_entries = 0;
|
|
return NULL;
|
|
}
|
|
|
|
static const struct ddi_buf_trans *
|
|
intel_ddi_get_buf_trans_hdmi(struct drm_i915_private *dev_priv,
|
|
int *n_entries)
|
|
{
|
|
if (IS_GEN9_BC(dev_priv)) {
|
|
return skl_get_buf_trans_hdmi(dev_priv, n_entries);
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(bdw_ddi_translations_hdmi);
|
|
return bdw_ddi_translations_hdmi;
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
*n_entries = ARRAY_SIZE(hsw_ddi_translations_hdmi);
|
|
return hsw_ddi_translations_hdmi;
|
|
}
|
|
|
|
*n_entries = 0;
|
|
return NULL;
|
|
}
|
|
|
|
static const struct bxt_ddi_buf_trans *
|
|
bxt_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
*n_entries = ARRAY_SIZE(bxt_ddi_translations_dp);
|
|
return bxt_ddi_translations_dp;
|
|
}
|
|
|
|
static const struct bxt_ddi_buf_trans *
|
|
bxt_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
if (dev_priv->vbt.edp.low_vswing) {
|
|
*n_entries = ARRAY_SIZE(bxt_ddi_translations_edp);
|
|
return bxt_ddi_translations_edp;
|
|
}
|
|
|
|
return bxt_get_buf_trans_dp(dev_priv, n_entries);
|
|
}
|
|
|
|
static const struct bxt_ddi_buf_trans *
|
|
bxt_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
*n_entries = ARRAY_SIZE(bxt_ddi_translations_hdmi);
|
|
return bxt_ddi_translations_hdmi;
|
|
}
|
|
|
|
static const struct cnl_ddi_buf_trans *
|
|
cnl_get_buf_trans_hdmi(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
|
|
|
|
if (voltage == VOLTAGE_INFO_0_85V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_85V);
|
|
return cnl_ddi_translations_hdmi_0_85V;
|
|
} else if (voltage == VOLTAGE_INFO_0_95V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_0_95V);
|
|
return cnl_ddi_translations_hdmi_0_95V;
|
|
} else if (voltage == VOLTAGE_INFO_1_05V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_hdmi_1_05V);
|
|
return cnl_ddi_translations_hdmi_1_05V;
|
|
} else {
|
|
*n_entries = 1; /* shut up gcc */
|
|
MISSING_CASE(voltage);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static const struct cnl_ddi_buf_trans *
|
|
cnl_get_buf_trans_dp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
|
|
|
|
if (voltage == VOLTAGE_INFO_0_85V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_85V);
|
|
return cnl_ddi_translations_dp_0_85V;
|
|
} else if (voltage == VOLTAGE_INFO_0_95V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_0_95V);
|
|
return cnl_ddi_translations_dp_0_95V;
|
|
} else if (voltage == VOLTAGE_INFO_1_05V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_dp_1_05V);
|
|
return cnl_ddi_translations_dp_1_05V;
|
|
} else {
|
|
*n_entries = 1; /* shut up gcc */
|
|
MISSING_CASE(voltage);
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
static const struct cnl_ddi_buf_trans *
|
|
cnl_get_buf_trans_edp(struct drm_i915_private *dev_priv, int *n_entries)
|
|
{
|
|
u32 voltage = I915_READ(CNL_PORT_COMP_DW3) & VOLTAGE_INFO_MASK;
|
|
|
|
if (dev_priv->vbt.edp.low_vswing) {
|
|
if (voltage == VOLTAGE_INFO_0_85V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_85V);
|
|
return cnl_ddi_translations_edp_0_85V;
|
|
} else if (voltage == VOLTAGE_INFO_0_95V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_0_95V);
|
|
return cnl_ddi_translations_edp_0_95V;
|
|
} else if (voltage == VOLTAGE_INFO_1_05V) {
|
|
*n_entries = ARRAY_SIZE(cnl_ddi_translations_edp_1_05V);
|
|
return cnl_ddi_translations_edp_1_05V;
|
|
} else {
|
|
*n_entries = 1; /* shut up gcc */
|
|
MISSING_CASE(voltage);
|
|
}
|
|
return NULL;
|
|
} else {
|
|
return cnl_get_buf_trans_dp(dev_priv, n_entries);
|
|
}
|
|
}
|
|
|
|
static const struct icl_combo_phy_ddi_buf_trans *
|
|
icl_get_combo_buf_trans(struct drm_i915_private *dev_priv, enum port port,
|
|
int type, int *n_entries)
|
|
{
|
|
u32 voltage = I915_READ(ICL_PORT_COMP_DW3(port)) & VOLTAGE_INFO_MASK;
|
|
|
|
if (type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.low_vswing) {
|
|
switch (voltage) {
|
|
case VOLTAGE_INFO_0_85V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_85V);
|
|
return icl_combo_phy_ddi_translations_edp_0_85V;
|
|
case VOLTAGE_INFO_0_95V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_0_95V);
|
|
return icl_combo_phy_ddi_translations_edp_0_95V;
|
|
case VOLTAGE_INFO_1_05V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_edp_1_05V);
|
|
return icl_combo_phy_ddi_translations_edp_1_05V;
|
|
default:
|
|
MISSING_CASE(voltage);
|
|
return NULL;
|
|
}
|
|
} else {
|
|
switch (voltage) {
|
|
case VOLTAGE_INFO_0_85V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_85V);
|
|
return icl_combo_phy_ddi_translations_dp_hdmi_0_85V;
|
|
case VOLTAGE_INFO_0_95V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_0_95V);
|
|
return icl_combo_phy_ddi_translations_dp_hdmi_0_95V;
|
|
case VOLTAGE_INFO_1_05V:
|
|
*n_entries = ARRAY_SIZE(icl_combo_phy_ddi_translations_dp_hdmi_1_05V);
|
|
return icl_combo_phy_ddi_translations_dp_hdmi_1_05V;
|
|
default:
|
|
MISSING_CASE(voltage);
|
|
return NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int intel_ddi_hdmi_level(struct drm_i915_private *dev_priv, enum port port)
|
|
{
|
|
int n_entries, level, default_entry;
|
|
|
|
level = dev_priv->vbt.ddi_port_info[port].hdmi_level_shift;
|
|
|
|
if (IS_ICELAKE(dev_priv)) {
|
|
if (intel_port_is_combophy(dev_priv, port))
|
|
icl_get_combo_buf_trans(dev_priv, port,
|
|
INTEL_OUTPUT_HDMI, &n_entries);
|
|
else
|
|
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
|
|
default_entry = n_entries - 1;
|
|
} else if (IS_CANNONLAKE(dev_priv)) {
|
|
cnl_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
default_entry = n_entries - 1;
|
|
} else if (IS_GEN9_LP(dev_priv)) {
|
|
bxt_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
default_entry = n_entries - 1;
|
|
} else if (IS_GEN9_BC(dev_priv)) {
|
|
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
default_entry = 8;
|
|
} else if (IS_BROADWELL(dev_priv)) {
|
|
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
default_entry = 7;
|
|
} else if (IS_HASWELL(dev_priv)) {
|
|
intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
default_entry = 6;
|
|
} else {
|
|
WARN(1, "ddi translation table missing\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Choose a good default if VBT is badly populated */
|
|
if (level == HDMI_LEVEL_SHIFT_UNKNOWN || level >= n_entries)
|
|
level = default_entry;
|
|
|
|
if (WARN_ON_ONCE(n_entries == 0))
|
|
return 0;
|
|
if (WARN_ON_ONCE(level >= n_entries))
|
|
level = n_entries - 1;
|
|
|
|
return level;
|
|
}
|
|
|
|
/*
|
|
* Starting with Haswell, DDI port buffers must be programmed with correct
|
|
* values in advance. This function programs the correct values for
|
|
* DP/eDP/FDI use cases.
|
|
*/
|
|
static void intel_prepare_dp_ddi_buffers(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
u32 iboost_bit = 0;
|
|
int i, n_entries;
|
|
enum port port = encoder->port;
|
|
const struct ddi_buf_trans *ddi_translations;
|
|
|
|
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG))
|
|
ddi_translations = intel_ddi_get_buf_trans_fdi(dev_priv,
|
|
&n_entries);
|
|
else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_EDP))
|
|
ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port,
|
|
&n_entries);
|
|
else
|
|
ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port,
|
|
&n_entries);
|
|
|
|
/* If we're boosting the current, set bit 31 of trans1 */
|
|
if (IS_GEN9_BC(dev_priv) &&
|
|
dev_priv->vbt.ddi_port_info[port].dp_boost_level)
|
|
iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE;
|
|
|
|
for (i = 0; i < n_entries; i++) {
|
|
I915_WRITE(DDI_BUF_TRANS_LO(port, i),
|
|
ddi_translations[i].trans1 | iboost_bit);
|
|
I915_WRITE(DDI_BUF_TRANS_HI(port, i),
|
|
ddi_translations[i].trans2);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Starting with Haswell, DDI port buffers must be programmed with correct
|
|
* values in advance. This function programs the correct values for
|
|
* HDMI/DVI use cases.
|
|
*/
|
|
static void intel_prepare_hdmi_ddi_buffers(struct intel_encoder *encoder,
|
|
int level)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
u32 iboost_bit = 0;
|
|
int n_entries;
|
|
enum port port = encoder->port;
|
|
const struct ddi_buf_trans *ddi_translations;
|
|
|
|
ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
|
|
if (WARN_ON_ONCE(!ddi_translations))
|
|
return;
|
|
if (WARN_ON_ONCE(level >= n_entries))
|
|
level = n_entries - 1;
|
|
|
|
/* If we're boosting the current, set bit 31 of trans1 */
|
|
if (IS_GEN9_BC(dev_priv) &&
|
|
dev_priv->vbt.ddi_port_info[port].hdmi_boost_level)
|
|
iboost_bit = DDI_BUF_BALANCE_LEG_ENABLE;
|
|
|
|
/* Entry 9 is for HDMI: */
|
|
I915_WRITE(DDI_BUF_TRANS_LO(port, 9),
|
|
ddi_translations[level].trans1 | iboost_bit);
|
|
I915_WRITE(DDI_BUF_TRANS_HI(port, 9),
|
|
ddi_translations[level].trans2);
|
|
}
|
|
|
|
static void intel_wait_ddi_buf_idle(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
i915_reg_t reg = DDI_BUF_CTL(port);
|
|
int i;
|
|
|
|
for (i = 0; i < 16; i++) {
|
|
udelay(1);
|
|
if (I915_READ(reg) & DDI_BUF_IS_IDLE)
|
|
return;
|
|
}
|
|
DRM_ERROR("Timeout waiting for DDI BUF %c idle bit\n", port_name(port));
|
|
}
|
|
|
|
static uint32_t hsw_pll_to_ddi_pll_sel(const struct intel_shared_dpll *pll)
|
|
{
|
|
switch (pll->info->id) {
|
|
case DPLL_ID_WRPLL1:
|
|
return PORT_CLK_SEL_WRPLL1;
|
|
case DPLL_ID_WRPLL2:
|
|
return PORT_CLK_SEL_WRPLL2;
|
|
case DPLL_ID_SPLL:
|
|
return PORT_CLK_SEL_SPLL;
|
|
case DPLL_ID_LCPLL_810:
|
|
return PORT_CLK_SEL_LCPLL_810;
|
|
case DPLL_ID_LCPLL_1350:
|
|
return PORT_CLK_SEL_LCPLL_1350;
|
|
case DPLL_ID_LCPLL_2700:
|
|
return PORT_CLK_SEL_LCPLL_2700;
|
|
default:
|
|
MISSING_CASE(pll->info->id);
|
|
return PORT_CLK_SEL_NONE;
|
|
}
|
|
}
|
|
|
|
static uint32_t icl_pll_to_ddi_pll_sel(struct intel_encoder *encoder,
|
|
const struct intel_shared_dpll *pll)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(encoder->base.crtc);
|
|
int clock = crtc->config->port_clock;
|
|
const enum intel_dpll_id id = pll->info->id;
|
|
|
|
switch (id) {
|
|
default:
|
|
MISSING_CASE(id);
|
|
/* fall through */
|
|
case DPLL_ID_ICL_DPLL0:
|
|
case DPLL_ID_ICL_DPLL1:
|
|
return DDI_CLK_SEL_NONE;
|
|
case DPLL_ID_ICL_TBTPLL:
|
|
switch (clock) {
|
|
case 162000:
|
|
return DDI_CLK_SEL_TBT_162;
|
|
case 270000:
|
|
return DDI_CLK_SEL_TBT_270;
|
|
case 540000:
|
|
return DDI_CLK_SEL_TBT_540;
|
|
case 810000:
|
|
return DDI_CLK_SEL_TBT_810;
|
|
default:
|
|
MISSING_CASE(clock);
|
|
break;
|
|
}
|
|
case DPLL_ID_ICL_MGPLL1:
|
|
case DPLL_ID_ICL_MGPLL2:
|
|
case DPLL_ID_ICL_MGPLL3:
|
|
case DPLL_ID_ICL_MGPLL4:
|
|
return DDI_CLK_SEL_MG;
|
|
}
|
|
}
|
|
|
|
/* Starting with Haswell, different DDI ports can work in FDI mode for
|
|
* connection to the PCH-located connectors. For this, it is necessary to train
|
|
* both the DDI port and PCH receiver for the desired DDI buffer settings.
|
|
*
|
|
* The recommended port to work in FDI mode is DDI E, which we use here. Also,
|
|
* please note that when FDI mode is active on DDI E, it shares 2 lines with
|
|
* DDI A (which is used for eDP)
|
|
*/
|
|
|
|
void hsw_fdi_link_train(struct intel_crtc *crtc,
|
|
const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_encoder *encoder;
|
|
u32 temp, i, rx_ctl_val, ddi_pll_sel;
|
|
|
|
for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
|
|
WARN_ON(encoder->type != INTEL_OUTPUT_ANALOG);
|
|
intel_prepare_dp_ddi_buffers(encoder, crtc_state);
|
|
}
|
|
|
|
/* Set the FDI_RX_MISC pwrdn lanes and the 2 workarounds listed at the
|
|
* mode set "sequence for CRT port" document:
|
|
* - TP1 to TP2 time with the default value
|
|
* - FDI delay to 90h
|
|
*
|
|
* WaFDIAutoLinkSetTimingOverrride:hsw
|
|
*/
|
|
I915_WRITE(FDI_RX_MISC(PIPE_A), FDI_RX_PWRDN_LANE1_VAL(2) |
|
|
FDI_RX_PWRDN_LANE0_VAL(2) |
|
|
FDI_RX_TP1_TO_TP2_48 | FDI_RX_FDI_DELAY_90);
|
|
|
|
/* Enable the PCH Receiver FDI PLL */
|
|
rx_ctl_val = dev_priv->fdi_rx_config | FDI_RX_ENHANCE_FRAME_ENABLE |
|
|
FDI_RX_PLL_ENABLE |
|
|
FDI_DP_PORT_WIDTH(crtc_state->fdi_lanes);
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
POSTING_READ(FDI_RX_CTL(PIPE_A));
|
|
udelay(220);
|
|
|
|
/* Switch from Rawclk to PCDclk */
|
|
rx_ctl_val |= FDI_PCDCLK;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
|
|
/* Configure Port Clock Select */
|
|
ddi_pll_sel = hsw_pll_to_ddi_pll_sel(crtc_state->shared_dpll);
|
|
I915_WRITE(PORT_CLK_SEL(PORT_E), ddi_pll_sel);
|
|
WARN_ON(ddi_pll_sel != PORT_CLK_SEL_SPLL);
|
|
|
|
/* Start the training iterating through available voltages and emphasis,
|
|
* testing each value twice. */
|
|
for (i = 0; i < ARRAY_SIZE(hsw_ddi_translations_fdi) * 2; i++) {
|
|
/* Configure DP_TP_CTL with auto-training */
|
|
I915_WRITE(DP_TP_CTL(PORT_E),
|
|
DP_TP_CTL_FDI_AUTOTRAIN |
|
|
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
|
|
DP_TP_CTL_LINK_TRAIN_PAT1 |
|
|
DP_TP_CTL_ENABLE);
|
|
|
|
/* Configure and enable DDI_BUF_CTL for DDI E with next voltage.
|
|
* DDI E does not support port reversal, the functionality is
|
|
* achieved on the PCH side in FDI_RX_CTL, so no need to set the
|
|
* port reversal bit */
|
|
I915_WRITE(DDI_BUF_CTL(PORT_E),
|
|
DDI_BUF_CTL_ENABLE |
|
|
((crtc_state->fdi_lanes - 1) << 1) |
|
|
DDI_BUF_TRANS_SELECT(i / 2));
|
|
POSTING_READ(DDI_BUF_CTL(PORT_E));
|
|
|
|
udelay(600);
|
|
|
|
/* Program PCH FDI Receiver TU */
|
|
I915_WRITE(FDI_RX_TUSIZE1(PIPE_A), TU_SIZE(64));
|
|
|
|
/* Enable PCH FDI Receiver with auto-training */
|
|
rx_ctl_val |= FDI_RX_ENABLE | FDI_LINK_TRAIN_AUTO;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
POSTING_READ(FDI_RX_CTL(PIPE_A));
|
|
|
|
/* Wait for FDI receiver lane calibration */
|
|
udelay(30);
|
|
|
|
/* Unset FDI_RX_MISC pwrdn lanes */
|
|
temp = I915_READ(FDI_RX_MISC(PIPE_A));
|
|
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
|
|
I915_WRITE(FDI_RX_MISC(PIPE_A), temp);
|
|
POSTING_READ(FDI_RX_MISC(PIPE_A));
|
|
|
|
/* Wait for FDI auto training time */
|
|
udelay(5);
|
|
|
|
temp = I915_READ(DP_TP_STATUS(PORT_E));
|
|
if (temp & DP_TP_STATUS_AUTOTRAIN_DONE) {
|
|
DRM_DEBUG_KMS("FDI link training done on step %d\n", i);
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* Leave things enabled even if we failed to train FDI.
|
|
* Results in less fireworks from the state checker.
|
|
*/
|
|
if (i == ARRAY_SIZE(hsw_ddi_translations_fdi) * 2 - 1) {
|
|
DRM_ERROR("FDI link training failed!\n");
|
|
break;
|
|
}
|
|
|
|
rx_ctl_val &= ~FDI_RX_ENABLE;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), rx_ctl_val);
|
|
POSTING_READ(FDI_RX_CTL(PIPE_A));
|
|
|
|
temp = I915_READ(DDI_BUF_CTL(PORT_E));
|
|
temp &= ~DDI_BUF_CTL_ENABLE;
|
|
I915_WRITE(DDI_BUF_CTL(PORT_E), temp);
|
|
POSTING_READ(DDI_BUF_CTL(PORT_E));
|
|
|
|
/* Disable DP_TP_CTL and FDI_RX_CTL and retry */
|
|
temp = I915_READ(DP_TP_CTL(PORT_E));
|
|
temp &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
|
|
temp |= DP_TP_CTL_LINK_TRAIN_PAT1;
|
|
I915_WRITE(DP_TP_CTL(PORT_E), temp);
|
|
POSTING_READ(DP_TP_CTL(PORT_E));
|
|
|
|
intel_wait_ddi_buf_idle(dev_priv, PORT_E);
|
|
|
|
/* Reset FDI_RX_MISC pwrdn lanes */
|
|
temp = I915_READ(FDI_RX_MISC(PIPE_A));
|
|
temp &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
|
|
temp |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
|
|
I915_WRITE(FDI_RX_MISC(PIPE_A), temp);
|
|
POSTING_READ(FDI_RX_MISC(PIPE_A));
|
|
}
|
|
|
|
/* Enable normal pixel sending for FDI */
|
|
I915_WRITE(DP_TP_CTL(PORT_E),
|
|
DP_TP_CTL_FDI_AUTOTRAIN |
|
|
DP_TP_CTL_LINK_TRAIN_NORMAL |
|
|
DP_TP_CTL_ENHANCED_FRAME_ENABLE |
|
|
DP_TP_CTL_ENABLE);
|
|
}
|
|
|
|
static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder)
|
|
{
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
struct intel_digital_port *intel_dig_port =
|
|
enc_to_dig_port(&encoder->base);
|
|
|
|
intel_dp->DP = intel_dig_port->saved_port_bits |
|
|
DDI_BUF_CTL_ENABLE | DDI_BUF_TRANS_SELECT(0);
|
|
intel_dp->DP |= DDI_PORT_WIDTH(intel_dp->lane_count);
|
|
}
|
|
|
|
static struct intel_encoder *
|
|
intel_ddi_get_crtc_encoder(struct intel_crtc *crtc)
|
|
{
|
|
struct drm_device *dev = crtc->base.dev;
|
|
struct intel_encoder *encoder, *ret = NULL;
|
|
int num_encoders = 0;
|
|
|
|
for_each_encoder_on_crtc(dev, &crtc->base, encoder) {
|
|
ret = encoder;
|
|
num_encoders++;
|
|
}
|
|
|
|
if (num_encoders != 1)
|
|
WARN(1, "%d encoders on crtc for pipe %c\n", num_encoders,
|
|
pipe_name(crtc->pipe));
|
|
|
|
BUG_ON(ret == NULL);
|
|
return ret;
|
|
}
|
|
|
|
#define LC_FREQ 2700
|
|
|
|
static int hsw_ddi_calc_wrpll_link(struct drm_i915_private *dev_priv,
|
|
i915_reg_t reg)
|
|
{
|
|
int refclk = LC_FREQ;
|
|
int n, p, r;
|
|
u32 wrpll;
|
|
|
|
wrpll = I915_READ(reg);
|
|
switch (wrpll & WRPLL_PLL_REF_MASK) {
|
|
case WRPLL_PLL_SSC:
|
|
case WRPLL_PLL_NON_SSC:
|
|
/*
|
|
* We could calculate spread here, but our checking
|
|
* code only cares about 5% accuracy, and spread is a max of
|
|
* 0.5% downspread.
|
|
*/
|
|
refclk = 135;
|
|
break;
|
|
case WRPLL_PLL_LCPLL:
|
|
refclk = LC_FREQ;
|
|
break;
|
|
default:
|
|
WARN(1, "bad wrpll refclk\n");
|
|
return 0;
|
|
}
|
|
|
|
r = wrpll & WRPLL_DIVIDER_REF_MASK;
|
|
p = (wrpll & WRPLL_DIVIDER_POST_MASK) >> WRPLL_DIVIDER_POST_SHIFT;
|
|
n = (wrpll & WRPLL_DIVIDER_FB_MASK) >> WRPLL_DIVIDER_FB_SHIFT;
|
|
|
|
/* Convert to KHz, p & r have a fixed point portion */
|
|
return (refclk * n * 100) / (p * r);
|
|
}
|
|
|
|
static int skl_calc_wrpll_link(struct drm_i915_private *dev_priv,
|
|
enum intel_dpll_id pll_id)
|
|
{
|
|
i915_reg_t cfgcr1_reg, cfgcr2_reg;
|
|
uint32_t cfgcr1_val, cfgcr2_val;
|
|
uint32_t p0, p1, p2, dco_freq;
|
|
|
|
cfgcr1_reg = DPLL_CFGCR1(pll_id);
|
|
cfgcr2_reg = DPLL_CFGCR2(pll_id);
|
|
|
|
cfgcr1_val = I915_READ(cfgcr1_reg);
|
|
cfgcr2_val = I915_READ(cfgcr2_reg);
|
|
|
|
p0 = cfgcr2_val & DPLL_CFGCR2_PDIV_MASK;
|
|
p2 = cfgcr2_val & DPLL_CFGCR2_KDIV_MASK;
|
|
|
|
if (cfgcr2_val & DPLL_CFGCR2_QDIV_MODE(1))
|
|
p1 = (cfgcr2_val & DPLL_CFGCR2_QDIV_RATIO_MASK) >> 8;
|
|
else
|
|
p1 = 1;
|
|
|
|
|
|
switch (p0) {
|
|
case DPLL_CFGCR2_PDIV_1:
|
|
p0 = 1;
|
|
break;
|
|
case DPLL_CFGCR2_PDIV_2:
|
|
p0 = 2;
|
|
break;
|
|
case DPLL_CFGCR2_PDIV_3:
|
|
p0 = 3;
|
|
break;
|
|
case DPLL_CFGCR2_PDIV_7:
|
|
p0 = 7;
|
|
break;
|
|
}
|
|
|
|
switch (p2) {
|
|
case DPLL_CFGCR2_KDIV_5:
|
|
p2 = 5;
|
|
break;
|
|
case DPLL_CFGCR2_KDIV_2:
|
|
p2 = 2;
|
|
break;
|
|
case DPLL_CFGCR2_KDIV_3:
|
|
p2 = 3;
|
|
break;
|
|
case DPLL_CFGCR2_KDIV_1:
|
|
p2 = 1;
|
|
break;
|
|
}
|
|
|
|
dco_freq = (cfgcr1_val & DPLL_CFGCR1_DCO_INTEGER_MASK) * 24 * 1000;
|
|
|
|
dco_freq += (((cfgcr1_val & DPLL_CFGCR1_DCO_FRACTION_MASK) >> 9) * 24 *
|
|
1000) / 0x8000;
|
|
|
|
return dco_freq / (p0 * p1 * p2 * 5);
|
|
}
|
|
|
|
static int cnl_calc_wrpll_link(struct drm_i915_private *dev_priv,
|
|
enum intel_dpll_id pll_id)
|
|
{
|
|
uint32_t cfgcr0, cfgcr1;
|
|
uint32_t p0, p1, p2, dco_freq, ref_clock;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11) {
|
|
cfgcr0 = I915_READ(ICL_DPLL_CFGCR0(pll_id));
|
|
cfgcr1 = I915_READ(ICL_DPLL_CFGCR1(pll_id));
|
|
} else {
|
|
cfgcr0 = I915_READ(CNL_DPLL_CFGCR0(pll_id));
|
|
cfgcr1 = I915_READ(CNL_DPLL_CFGCR1(pll_id));
|
|
}
|
|
|
|
p0 = cfgcr1 & DPLL_CFGCR1_PDIV_MASK;
|
|
p2 = cfgcr1 & DPLL_CFGCR1_KDIV_MASK;
|
|
|
|
if (cfgcr1 & DPLL_CFGCR1_QDIV_MODE(1))
|
|
p1 = (cfgcr1 & DPLL_CFGCR1_QDIV_RATIO_MASK) >>
|
|
DPLL_CFGCR1_QDIV_RATIO_SHIFT;
|
|
else
|
|
p1 = 1;
|
|
|
|
|
|
switch (p0) {
|
|
case DPLL_CFGCR1_PDIV_2:
|
|
p0 = 2;
|
|
break;
|
|
case DPLL_CFGCR1_PDIV_3:
|
|
p0 = 3;
|
|
break;
|
|
case DPLL_CFGCR1_PDIV_5:
|
|
p0 = 5;
|
|
break;
|
|
case DPLL_CFGCR1_PDIV_7:
|
|
p0 = 7;
|
|
break;
|
|
}
|
|
|
|
switch (p2) {
|
|
case DPLL_CFGCR1_KDIV_1:
|
|
p2 = 1;
|
|
break;
|
|
case DPLL_CFGCR1_KDIV_2:
|
|
p2 = 2;
|
|
break;
|
|
case DPLL_CFGCR1_KDIV_4:
|
|
p2 = 4;
|
|
break;
|
|
}
|
|
|
|
ref_clock = cnl_hdmi_pll_ref_clock(dev_priv);
|
|
|
|
dco_freq = (cfgcr0 & DPLL_CFGCR0_DCO_INTEGER_MASK) * ref_clock;
|
|
|
|
dco_freq += (((cfgcr0 & DPLL_CFGCR0_DCO_FRACTION_MASK) >>
|
|
DPLL_CFGCR0_DCO_FRACTION_SHIFT) * ref_clock) / 0x8000;
|
|
|
|
if (WARN_ON(p0 == 0 || p1 == 0 || p2 == 0))
|
|
return 0;
|
|
|
|
return dco_freq / (p0 * p1 * p2 * 5);
|
|
}
|
|
|
|
static int icl_calc_tbt_pll_link(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
u32 val = I915_READ(DDI_CLK_SEL(port)) & DDI_CLK_SEL_MASK;
|
|
|
|
switch (val) {
|
|
case DDI_CLK_SEL_NONE:
|
|
return 0;
|
|
case DDI_CLK_SEL_TBT_162:
|
|
return 162000;
|
|
case DDI_CLK_SEL_TBT_270:
|
|
return 270000;
|
|
case DDI_CLK_SEL_TBT_540:
|
|
return 540000;
|
|
case DDI_CLK_SEL_TBT_810:
|
|
return 810000;
|
|
default:
|
|
MISSING_CASE(val);
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
static int icl_calc_mg_pll_link(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
u32 mg_pll_div0, mg_clktop_hsclkctl;
|
|
u32 m1, m2_int, m2_frac, div1, div2, refclk;
|
|
u64 tmp;
|
|
|
|
refclk = dev_priv->cdclk.hw.ref;
|
|
|
|
mg_pll_div0 = I915_READ(MG_PLL_DIV0(port));
|
|
mg_clktop_hsclkctl = I915_READ(MG_CLKTOP2_HSCLKCTL(port));
|
|
|
|
m1 = I915_READ(MG_PLL_DIV1(port)) & MG_PLL_DIV1_FBPREDIV_MASK;
|
|
m2_int = mg_pll_div0 & MG_PLL_DIV0_FBDIV_INT_MASK;
|
|
m2_frac = (mg_pll_div0 & MG_PLL_DIV0_FRACNEN_H) ?
|
|
(mg_pll_div0 & MG_PLL_DIV0_FBDIV_FRAC_MASK) >>
|
|
MG_PLL_DIV0_FBDIV_FRAC_SHIFT : 0;
|
|
|
|
switch (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_MASK) {
|
|
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_2:
|
|
div1 = 2;
|
|
break;
|
|
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_3:
|
|
div1 = 3;
|
|
break;
|
|
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_5:
|
|
div1 = 5;
|
|
break;
|
|
case MG_CLKTOP2_HSCLKCTL_HSDIV_RATIO_7:
|
|
div1 = 7;
|
|
break;
|
|
default:
|
|
MISSING_CASE(mg_clktop_hsclkctl);
|
|
return 0;
|
|
}
|
|
|
|
div2 = (mg_clktop_hsclkctl & MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_MASK) >>
|
|
MG_CLKTOP2_HSCLKCTL_DSDIV_RATIO_SHIFT;
|
|
/* div2 value of 0 is same as 1 means no div */
|
|
if (div2 == 0)
|
|
div2 = 1;
|
|
|
|
/*
|
|
* Adjust the original formula to delay the division by 2^22 in order to
|
|
* minimize possible rounding errors.
|
|
*/
|
|
tmp = (u64)m1 * m2_int * refclk +
|
|
(((u64)m1 * m2_frac * refclk) >> 22);
|
|
tmp = div_u64(tmp, 5 * div1 * div2);
|
|
|
|
return tmp;
|
|
}
|
|
|
|
static void ddi_dotclock_get(struct intel_crtc_state *pipe_config)
|
|
{
|
|
int dotclock;
|
|
|
|
if (pipe_config->has_pch_encoder)
|
|
dotclock = intel_dotclock_calculate(pipe_config->port_clock,
|
|
&pipe_config->fdi_m_n);
|
|
else if (intel_crtc_has_dp_encoder(pipe_config))
|
|
dotclock = intel_dotclock_calculate(pipe_config->port_clock,
|
|
&pipe_config->dp_m_n);
|
|
else if (pipe_config->has_hdmi_sink && pipe_config->pipe_bpp == 36)
|
|
dotclock = pipe_config->port_clock * 2 / 3;
|
|
else
|
|
dotclock = pipe_config->port_clock;
|
|
|
|
if (pipe_config->ycbcr420)
|
|
dotclock *= 2;
|
|
|
|
if (pipe_config->pixel_multiplier)
|
|
dotclock /= pipe_config->pixel_multiplier;
|
|
|
|
pipe_config->base.adjusted_mode.crtc_clock = dotclock;
|
|
}
|
|
|
|
static void icl_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int link_clock = 0;
|
|
uint32_t pll_id;
|
|
|
|
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
|
|
if (intel_port_is_combophy(dev_priv, port)) {
|
|
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
|
|
link_clock = cnl_calc_wrpll_link(dev_priv, pll_id);
|
|
else
|
|
link_clock = icl_calc_dp_combo_pll_link(dev_priv,
|
|
pll_id);
|
|
} else {
|
|
if (pll_id == DPLL_ID_ICL_TBTPLL)
|
|
link_clock = icl_calc_tbt_pll_link(dev_priv, port);
|
|
else
|
|
link_clock = icl_calc_mg_pll_link(dev_priv, port);
|
|
}
|
|
|
|
pipe_config->port_clock = link_clock;
|
|
ddi_dotclock_get(pipe_config);
|
|
}
|
|
|
|
static void cnl_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
int link_clock = 0;
|
|
uint32_t cfgcr0;
|
|
enum intel_dpll_id pll_id;
|
|
|
|
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
|
|
|
|
cfgcr0 = I915_READ(CNL_DPLL_CFGCR0(pll_id));
|
|
|
|
if (cfgcr0 & DPLL_CFGCR0_HDMI_MODE) {
|
|
link_clock = cnl_calc_wrpll_link(dev_priv, pll_id);
|
|
} else {
|
|
link_clock = cfgcr0 & DPLL_CFGCR0_LINK_RATE_MASK;
|
|
|
|
switch (link_clock) {
|
|
case DPLL_CFGCR0_LINK_RATE_810:
|
|
link_clock = 81000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_1080:
|
|
link_clock = 108000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_1350:
|
|
link_clock = 135000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_1620:
|
|
link_clock = 162000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_2160:
|
|
link_clock = 216000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_2700:
|
|
link_clock = 270000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_3240:
|
|
link_clock = 324000;
|
|
break;
|
|
case DPLL_CFGCR0_LINK_RATE_4050:
|
|
link_clock = 405000;
|
|
break;
|
|
default:
|
|
WARN(1, "Unsupported link rate\n");
|
|
break;
|
|
}
|
|
link_clock *= 2;
|
|
}
|
|
|
|
pipe_config->port_clock = link_clock;
|
|
|
|
ddi_dotclock_get(pipe_config);
|
|
}
|
|
|
|
static void skl_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
int link_clock = 0;
|
|
uint32_t dpll_ctl1;
|
|
enum intel_dpll_id pll_id;
|
|
|
|
pll_id = intel_get_shared_dpll_id(dev_priv, pipe_config->shared_dpll);
|
|
|
|
dpll_ctl1 = I915_READ(DPLL_CTRL1);
|
|
|
|
if (dpll_ctl1 & DPLL_CTRL1_HDMI_MODE(pll_id)) {
|
|
link_clock = skl_calc_wrpll_link(dev_priv, pll_id);
|
|
} else {
|
|
link_clock = dpll_ctl1 & DPLL_CTRL1_LINK_RATE_MASK(pll_id);
|
|
link_clock >>= DPLL_CTRL1_LINK_RATE_SHIFT(pll_id);
|
|
|
|
switch (link_clock) {
|
|
case DPLL_CTRL1_LINK_RATE_810:
|
|
link_clock = 81000;
|
|
break;
|
|
case DPLL_CTRL1_LINK_RATE_1080:
|
|
link_clock = 108000;
|
|
break;
|
|
case DPLL_CTRL1_LINK_RATE_1350:
|
|
link_clock = 135000;
|
|
break;
|
|
case DPLL_CTRL1_LINK_RATE_1620:
|
|
link_clock = 162000;
|
|
break;
|
|
case DPLL_CTRL1_LINK_RATE_2160:
|
|
link_clock = 216000;
|
|
break;
|
|
case DPLL_CTRL1_LINK_RATE_2700:
|
|
link_clock = 270000;
|
|
break;
|
|
default:
|
|
WARN(1, "Unsupported link rate\n");
|
|
break;
|
|
}
|
|
link_clock *= 2;
|
|
}
|
|
|
|
pipe_config->port_clock = link_clock;
|
|
|
|
ddi_dotclock_get(pipe_config);
|
|
}
|
|
|
|
static void hsw_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
int link_clock = 0;
|
|
u32 val, pll;
|
|
|
|
val = hsw_pll_to_ddi_pll_sel(pipe_config->shared_dpll);
|
|
switch (val & PORT_CLK_SEL_MASK) {
|
|
case PORT_CLK_SEL_LCPLL_810:
|
|
link_clock = 81000;
|
|
break;
|
|
case PORT_CLK_SEL_LCPLL_1350:
|
|
link_clock = 135000;
|
|
break;
|
|
case PORT_CLK_SEL_LCPLL_2700:
|
|
link_clock = 270000;
|
|
break;
|
|
case PORT_CLK_SEL_WRPLL1:
|
|
link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(0));
|
|
break;
|
|
case PORT_CLK_SEL_WRPLL2:
|
|
link_clock = hsw_ddi_calc_wrpll_link(dev_priv, WRPLL_CTL(1));
|
|
break;
|
|
case PORT_CLK_SEL_SPLL:
|
|
pll = I915_READ(SPLL_CTL) & SPLL_PLL_FREQ_MASK;
|
|
if (pll == SPLL_PLL_FREQ_810MHz)
|
|
link_clock = 81000;
|
|
else if (pll == SPLL_PLL_FREQ_1350MHz)
|
|
link_clock = 135000;
|
|
else if (pll == SPLL_PLL_FREQ_2700MHz)
|
|
link_clock = 270000;
|
|
else {
|
|
WARN(1, "bad spll freq\n");
|
|
return;
|
|
}
|
|
break;
|
|
default:
|
|
WARN(1, "bad port clock sel\n");
|
|
return;
|
|
}
|
|
|
|
pipe_config->port_clock = link_clock * 2;
|
|
|
|
ddi_dotclock_get(pipe_config);
|
|
}
|
|
|
|
static int bxt_calc_pll_link(struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_dpll_hw_state *state;
|
|
struct dpll clock;
|
|
|
|
/* For DDI ports we always use a shared PLL. */
|
|
if (WARN_ON(!crtc_state->shared_dpll))
|
|
return 0;
|
|
|
|
state = &crtc_state->dpll_hw_state;
|
|
|
|
clock.m1 = 2;
|
|
clock.m2 = (state->pll0 & PORT_PLL_M2_MASK) << 22;
|
|
if (state->pll3 & PORT_PLL_M2_FRAC_ENABLE)
|
|
clock.m2 |= state->pll2 & PORT_PLL_M2_FRAC_MASK;
|
|
clock.n = (state->pll1 & PORT_PLL_N_MASK) >> PORT_PLL_N_SHIFT;
|
|
clock.p1 = (state->ebb0 & PORT_PLL_P1_MASK) >> PORT_PLL_P1_SHIFT;
|
|
clock.p2 = (state->ebb0 & PORT_PLL_P2_MASK) >> PORT_PLL_P2_SHIFT;
|
|
|
|
return chv_calc_dpll_params(100000, &clock);
|
|
}
|
|
|
|
static void bxt_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
pipe_config->port_clock = bxt_calc_pll_link(pipe_config);
|
|
|
|
ddi_dotclock_get(pipe_config);
|
|
}
|
|
|
|
static void intel_ddi_clock_get(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
|
|
if (INTEL_GEN(dev_priv) <= 8)
|
|
hsw_ddi_clock_get(encoder, pipe_config);
|
|
else if (IS_GEN9_BC(dev_priv))
|
|
skl_ddi_clock_get(encoder, pipe_config);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
bxt_ddi_clock_get(encoder, pipe_config);
|
|
else if (IS_CANNONLAKE(dev_priv))
|
|
cnl_ddi_clock_get(encoder, pipe_config);
|
|
else if (IS_ICELAKE(dev_priv))
|
|
icl_ddi_clock_get(encoder, pipe_config);
|
|
}
|
|
|
|
void intel_ddi_set_pipe_settings(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
u32 temp;
|
|
|
|
if (!intel_crtc_has_dp_encoder(crtc_state))
|
|
return;
|
|
|
|
WARN_ON(transcoder_is_dsi(cpu_transcoder));
|
|
|
|
temp = TRANS_MSA_SYNC_CLK;
|
|
|
|
if (crtc_state->limited_color_range)
|
|
temp |= TRANS_MSA_CEA_RANGE;
|
|
|
|
switch (crtc_state->pipe_bpp) {
|
|
case 18:
|
|
temp |= TRANS_MSA_6_BPC;
|
|
break;
|
|
case 24:
|
|
temp |= TRANS_MSA_8_BPC;
|
|
break;
|
|
case 30:
|
|
temp |= TRANS_MSA_10_BPC;
|
|
break;
|
|
case 36:
|
|
temp |= TRANS_MSA_12_BPC;
|
|
break;
|
|
default:
|
|
MISSING_CASE(crtc_state->pipe_bpp);
|
|
break;
|
|
}
|
|
|
|
I915_WRITE(TRANS_MSA_MISC(cpu_transcoder), temp);
|
|
}
|
|
|
|
void intel_ddi_set_vc_payload_alloc(const struct intel_crtc_state *crtc_state,
|
|
bool state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
uint32_t temp;
|
|
|
|
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
|
|
if (state == true)
|
|
temp |= TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
|
|
else
|
|
temp &= ~TRANS_DDI_DP_VC_PAYLOAD_ALLOC;
|
|
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
|
|
}
|
|
|
|
void intel_ddi_enable_transcoder_func(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
enum port port = encoder->port;
|
|
uint32_t temp;
|
|
|
|
/* Enable TRANS_DDI_FUNC_CTL for the pipe to work in HDMI mode */
|
|
temp = TRANS_DDI_FUNC_ENABLE;
|
|
temp |= TRANS_DDI_SELECT_PORT(port);
|
|
|
|
switch (crtc_state->pipe_bpp) {
|
|
case 18:
|
|
temp |= TRANS_DDI_BPC_6;
|
|
break;
|
|
case 24:
|
|
temp |= TRANS_DDI_BPC_8;
|
|
break;
|
|
case 30:
|
|
temp |= TRANS_DDI_BPC_10;
|
|
break;
|
|
case 36:
|
|
temp |= TRANS_DDI_BPC_12;
|
|
break;
|
|
default:
|
|
BUG();
|
|
}
|
|
|
|
if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PVSYNC)
|
|
temp |= TRANS_DDI_PVSYNC;
|
|
if (crtc_state->base.adjusted_mode.flags & DRM_MODE_FLAG_PHSYNC)
|
|
temp |= TRANS_DDI_PHSYNC;
|
|
|
|
if (cpu_transcoder == TRANSCODER_EDP) {
|
|
switch (pipe) {
|
|
case PIPE_A:
|
|
/* On Haswell, can only use the always-on power well for
|
|
* eDP when not using the panel fitter, and when not
|
|
* using motion blur mitigation (which we don't
|
|
* support). */
|
|
if (IS_HASWELL(dev_priv) &&
|
|
(crtc_state->pch_pfit.enabled ||
|
|
crtc_state->pch_pfit.force_thru))
|
|
temp |= TRANS_DDI_EDP_INPUT_A_ONOFF;
|
|
else
|
|
temp |= TRANS_DDI_EDP_INPUT_A_ON;
|
|
break;
|
|
case PIPE_B:
|
|
temp |= TRANS_DDI_EDP_INPUT_B_ONOFF;
|
|
break;
|
|
case PIPE_C:
|
|
temp |= TRANS_DDI_EDP_INPUT_C_ONOFF;
|
|
break;
|
|
default:
|
|
BUG();
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
|
|
if (crtc_state->has_hdmi_sink)
|
|
temp |= TRANS_DDI_MODE_SELECT_HDMI;
|
|
else
|
|
temp |= TRANS_DDI_MODE_SELECT_DVI;
|
|
|
|
if (crtc_state->hdmi_scrambling)
|
|
temp |= TRANS_DDI_HDMI_SCRAMBLING_MASK;
|
|
if (crtc_state->hdmi_high_tmds_clock_ratio)
|
|
temp |= TRANS_DDI_HIGH_TMDS_CHAR_RATE;
|
|
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_ANALOG)) {
|
|
temp |= TRANS_DDI_MODE_SELECT_FDI;
|
|
temp |= (crtc_state->fdi_lanes - 1) << 1;
|
|
} else if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)) {
|
|
temp |= TRANS_DDI_MODE_SELECT_DP_MST;
|
|
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
|
|
} else {
|
|
temp |= TRANS_DDI_MODE_SELECT_DP_SST;
|
|
temp |= DDI_PORT_WIDTH(crtc_state->lane_count);
|
|
}
|
|
|
|
I915_WRITE(TRANS_DDI_FUNC_CTL(cpu_transcoder), temp);
|
|
}
|
|
|
|
void intel_ddi_disable_transcoder_func(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
i915_reg_t reg = TRANS_DDI_FUNC_CTL(cpu_transcoder);
|
|
uint32_t val = I915_READ(reg);
|
|
|
|
val &= ~(TRANS_DDI_FUNC_ENABLE | TRANS_DDI_PORT_MASK | TRANS_DDI_DP_VC_PAYLOAD_ALLOC);
|
|
val |= TRANS_DDI_PORT_NONE;
|
|
I915_WRITE(reg, val);
|
|
|
|
if (dev_priv->quirks & QUIRK_INCREASE_DDI_DISABLED_TIME &&
|
|
intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI)) {
|
|
DRM_DEBUG_KMS("Quirk Increase DDI disabled time\n");
|
|
/* Quirk time at 100ms for reliable operation */
|
|
msleep(100);
|
|
}
|
|
}
|
|
|
|
int intel_ddi_toggle_hdcp_signalling(struct intel_encoder *intel_encoder,
|
|
bool enable)
|
|
{
|
|
struct drm_device *dev = intel_encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum pipe pipe = 0;
|
|
int ret = 0;
|
|
uint32_t tmp;
|
|
|
|
if (WARN_ON(!intel_display_power_get_if_enabled(dev_priv,
|
|
intel_encoder->power_domain)))
|
|
return -ENXIO;
|
|
|
|
if (WARN_ON(!intel_encoder->get_hw_state(intel_encoder, &pipe))) {
|
|
ret = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(pipe));
|
|
if (enable)
|
|
tmp |= TRANS_DDI_HDCP_SIGNALLING;
|
|
else
|
|
tmp &= ~TRANS_DDI_HDCP_SIGNALLING;
|
|
I915_WRITE(TRANS_DDI_FUNC_CTL(pipe), tmp);
|
|
out:
|
|
intel_display_power_put(dev_priv, intel_encoder->power_domain);
|
|
return ret;
|
|
}
|
|
|
|
bool intel_ddi_connector_get_hw_state(struct intel_connector *intel_connector)
|
|
{
|
|
struct drm_device *dev = intel_connector->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
struct intel_encoder *encoder = intel_connector->encoder;
|
|
int type = intel_connector->base.connector_type;
|
|
enum port port = encoder->port;
|
|
enum pipe pipe = 0;
|
|
enum transcoder cpu_transcoder;
|
|
uint32_t tmp;
|
|
bool ret;
|
|
|
|
if (!intel_display_power_get_if_enabled(dev_priv,
|
|
encoder->power_domain))
|
|
return false;
|
|
|
|
if (!encoder->get_hw_state(encoder, &pipe)) {
|
|
ret = false;
|
|
goto out;
|
|
}
|
|
|
|
if (port == PORT_A)
|
|
cpu_transcoder = TRANSCODER_EDP;
|
|
else
|
|
cpu_transcoder = (enum transcoder) pipe;
|
|
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
|
|
|
|
switch (tmp & TRANS_DDI_MODE_SELECT_MASK) {
|
|
case TRANS_DDI_MODE_SELECT_HDMI:
|
|
case TRANS_DDI_MODE_SELECT_DVI:
|
|
ret = type == DRM_MODE_CONNECTOR_HDMIA;
|
|
break;
|
|
|
|
case TRANS_DDI_MODE_SELECT_DP_SST:
|
|
ret = type == DRM_MODE_CONNECTOR_eDP ||
|
|
type == DRM_MODE_CONNECTOR_DisplayPort;
|
|
break;
|
|
|
|
case TRANS_DDI_MODE_SELECT_DP_MST:
|
|
/* if the transcoder is in MST state then
|
|
* connector isn't connected */
|
|
ret = false;
|
|
break;
|
|
|
|
case TRANS_DDI_MODE_SELECT_FDI:
|
|
ret = type == DRM_MODE_CONNECTOR_VGA;
|
|
break;
|
|
|
|
default:
|
|
ret = false;
|
|
break;
|
|
}
|
|
|
|
out:
|
|
intel_display_power_put(dev_priv, encoder->power_domain);
|
|
|
|
return ret;
|
|
}
|
|
|
|
bool intel_ddi_get_hw_state(struct intel_encoder *encoder,
|
|
enum pipe *pipe)
|
|
{
|
|
struct drm_device *dev = encoder->base.dev;
|
|
struct drm_i915_private *dev_priv = to_i915(dev);
|
|
enum port port = encoder->port;
|
|
enum pipe p;
|
|
u32 tmp;
|
|
bool ret;
|
|
|
|
if (!intel_display_power_get_if_enabled(dev_priv,
|
|
encoder->power_domain))
|
|
return false;
|
|
|
|
ret = false;
|
|
|
|
tmp = I915_READ(DDI_BUF_CTL(port));
|
|
|
|
if (!(tmp & DDI_BUF_CTL_ENABLE))
|
|
goto out;
|
|
|
|
if (port == PORT_A) {
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(TRANSCODER_EDP));
|
|
|
|
switch (tmp & TRANS_DDI_EDP_INPUT_MASK) {
|
|
case TRANS_DDI_EDP_INPUT_A_ON:
|
|
case TRANS_DDI_EDP_INPUT_A_ONOFF:
|
|
*pipe = PIPE_A;
|
|
break;
|
|
case TRANS_DDI_EDP_INPUT_B_ONOFF:
|
|
*pipe = PIPE_B;
|
|
break;
|
|
case TRANS_DDI_EDP_INPUT_C_ONOFF:
|
|
*pipe = PIPE_C;
|
|
break;
|
|
}
|
|
|
|
ret = true;
|
|
|
|
goto out;
|
|
}
|
|
|
|
for_each_pipe(dev_priv, p) {
|
|
enum transcoder cpu_transcoder = (enum transcoder) p;
|
|
|
|
tmp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
|
|
|
|
if ((tmp & TRANS_DDI_PORT_MASK) == TRANS_DDI_SELECT_PORT(port)) {
|
|
if ((tmp & TRANS_DDI_MODE_SELECT_MASK) ==
|
|
TRANS_DDI_MODE_SELECT_DP_MST)
|
|
goto out;
|
|
|
|
*pipe = p;
|
|
ret = true;
|
|
|
|
goto out;
|
|
}
|
|
}
|
|
|
|
DRM_DEBUG_KMS("No pipe for ddi port %c found\n", port_name(port));
|
|
|
|
out:
|
|
if (ret && IS_GEN9_LP(dev_priv)) {
|
|
tmp = I915_READ(BXT_PHY_CTL(port));
|
|
if ((tmp & (BXT_PHY_CMNLANE_POWERDOWN_ACK |
|
|
BXT_PHY_LANE_POWERDOWN_ACK |
|
|
BXT_PHY_LANE_ENABLED)) != BXT_PHY_LANE_ENABLED)
|
|
DRM_ERROR("Port %c enabled but PHY powered down? "
|
|
"(PHY_CTL %08x)\n", port_name(port), tmp);
|
|
}
|
|
|
|
intel_display_power_put(dev_priv, encoder->power_domain);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline enum intel_display_power_domain
|
|
intel_ddi_main_link_aux_domain(struct intel_dp *intel_dp)
|
|
{
|
|
/* CNL+ HW requires corresponding AUX IOs to be powered up for PSR with
|
|
* DC states enabled at the same time, while for driver initiated AUX
|
|
* transfers we need the same AUX IOs to be powered but with DC states
|
|
* disabled. Accordingly use the AUX power domain here which leaves DC
|
|
* states enabled.
|
|
* However, for non-A AUX ports the corresponding non-EDP transcoders
|
|
* would have already enabled power well 2 and DC_OFF. This means we can
|
|
* acquire a wider POWER_DOMAIN_AUX_{B,C,D,F} reference instead of a
|
|
* specific AUX_IO reference without powering up any extra wells.
|
|
* Note that PSR is enabled only on Port A even though this function
|
|
* returns the correct domain for other ports too.
|
|
*/
|
|
return intel_dp->aux_ch == AUX_CH_A ? POWER_DOMAIN_AUX_IO_A :
|
|
intel_dp->aux_power_domain;
|
|
}
|
|
|
|
static u64 intel_ddi_get_power_domains(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_digital_port *dig_port;
|
|
u64 domains;
|
|
|
|
/*
|
|
* TODO: Add support for MST encoders. Atm, the following should never
|
|
* happen since fake-MST encoders don't set their get_power_domains()
|
|
* hook.
|
|
*/
|
|
if (WARN_ON(intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST)))
|
|
return 0;
|
|
|
|
dig_port = enc_to_dig_port(&encoder->base);
|
|
domains = BIT_ULL(dig_port->ddi_io_power_domain);
|
|
|
|
/* AUX power is only needed for (e)DP mode, not for HDMI. */
|
|
if (intel_crtc_has_dp_encoder(crtc_state)) {
|
|
struct intel_dp *intel_dp = &dig_port->dp;
|
|
|
|
domains |= BIT_ULL(intel_ddi_main_link_aux_domain(intel_dp));
|
|
}
|
|
|
|
return domains;
|
|
}
|
|
|
|
void intel_ddi_enable_pipe_clock(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
struct intel_encoder *encoder = intel_ddi_get_crtc_encoder(crtc);
|
|
enum port port = encoder->port;
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
|
|
if (cpu_transcoder != TRANSCODER_EDP)
|
|
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
|
|
TRANS_CLK_SEL_PORT(port));
|
|
}
|
|
|
|
void intel_ddi_disable_pipe_clock(const struct intel_crtc_state *crtc_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc_state->base.crtc->dev);
|
|
enum transcoder cpu_transcoder = crtc_state->cpu_transcoder;
|
|
|
|
if (cpu_transcoder != TRANSCODER_EDP)
|
|
I915_WRITE(TRANS_CLK_SEL(cpu_transcoder),
|
|
TRANS_CLK_SEL_DISABLED);
|
|
}
|
|
|
|
static void _skl_ddi_set_iboost(struct drm_i915_private *dev_priv,
|
|
enum port port, uint8_t iboost)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = I915_READ(DISPIO_CR_TX_BMU_CR0);
|
|
tmp &= ~(BALANCE_LEG_MASK(port) | BALANCE_LEG_DISABLE(port));
|
|
if (iboost)
|
|
tmp |= iboost << BALANCE_LEG_SHIFT(port);
|
|
else
|
|
tmp |= BALANCE_LEG_DISABLE(port);
|
|
I915_WRITE(DISPIO_CR_TX_BMU_CR0, tmp);
|
|
}
|
|
|
|
static void skl_ddi_set_iboost(struct intel_encoder *encoder,
|
|
int level, enum intel_output_type type)
|
|
{
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
uint8_t iboost;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI)
|
|
iboost = dev_priv->vbt.ddi_port_info[port].hdmi_boost_level;
|
|
else
|
|
iboost = dev_priv->vbt.ddi_port_info[port].dp_boost_level;
|
|
|
|
if (iboost == 0) {
|
|
const struct ddi_buf_trans *ddi_translations;
|
|
int n_entries;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI)
|
|
ddi_translations = intel_ddi_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
else if (type == INTEL_OUTPUT_EDP)
|
|
ddi_translations = intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries);
|
|
else
|
|
ddi_translations = intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries);
|
|
|
|
if (WARN_ON_ONCE(!ddi_translations))
|
|
return;
|
|
if (WARN_ON_ONCE(level >= n_entries))
|
|
level = n_entries - 1;
|
|
|
|
iboost = ddi_translations[level].i_boost;
|
|
}
|
|
|
|
/* Make sure that the requested I_boost is valid */
|
|
if (iboost && iboost != 0x1 && iboost != 0x3 && iboost != 0x7) {
|
|
DRM_ERROR("Invalid I_boost value %u\n", iboost);
|
|
return;
|
|
}
|
|
|
|
_skl_ddi_set_iboost(dev_priv, port, iboost);
|
|
|
|
if (port == PORT_A && intel_dig_port->max_lanes == 4)
|
|
_skl_ddi_set_iboost(dev_priv, PORT_E, iboost);
|
|
}
|
|
|
|
static void bxt_ddi_vswing_sequence(struct intel_encoder *encoder,
|
|
int level, enum intel_output_type type)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
const struct bxt_ddi_buf_trans *ddi_translations;
|
|
enum port port = encoder->port;
|
|
int n_entries;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI)
|
|
ddi_translations = bxt_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
else if (type == INTEL_OUTPUT_EDP)
|
|
ddi_translations = bxt_get_buf_trans_edp(dev_priv, &n_entries);
|
|
else
|
|
ddi_translations = bxt_get_buf_trans_dp(dev_priv, &n_entries);
|
|
|
|
if (WARN_ON_ONCE(!ddi_translations))
|
|
return;
|
|
if (WARN_ON_ONCE(level >= n_entries))
|
|
level = n_entries - 1;
|
|
|
|
bxt_ddi_phy_set_signal_level(dev_priv, port,
|
|
ddi_translations[level].margin,
|
|
ddi_translations[level].scale,
|
|
ddi_translations[level].enable,
|
|
ddi_translations[level].deemphasis);
|
|
}
|
|
|
|
u8 intel_ddi_dp_voltage_max(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int n_entries;
|
|
|
|
if (IS_ICELAKE(dev_priv)) {
|
|
if (intel_port_is_combophy(dev_priv, port))
|
|
icl_get_combo_buf_trans(dev_priv, port, encoder->type,
|
|
&n_entries);
|
|
else
|
|
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
|
|
} else if (IS_CANNONLAKE(dev_priv)) {
|
|
if (encoder->type == INTEL_OUTPUT_EDP)
|
|
cnl_get_buf_trans_edp(dev_priv, &n_entries);
|
|
else
|
|
cnl_get_buf_trans_dp(dev_priv, &n_entries);
|
|
} else if (IS_GEN9_LP(dev_priv)) {
|
|
if (encoder->type == INTEL_OUTPUT_EDP)
|
|
bxt_get_buf_trans_edp(dev_priv, &n_entries);
|
|
else
|
|
bxt_get_buf_trans_dp(dev_priv, &n_entries);
|
|
} else {
|
|
if (encoder->type == INTEL_OUTPUT_EDP)
|
|
intel_ddi_get_buf_trans_edp(dev_priv, port, &n_entries);
|
|
else
|
|
intel_ddi_get_buf_trans_dp(dev_priv, port, &n_entries);
|
|
}
|
|
|
|
if (WARN_ON(n_entries < 1))
|
|
n_entries = 1;
|
|
if (WARN_ON(n_entries > ARRAY_SIZE(index_to_dp_signal_levels)))
|
|
n_entries = ARRAY_SIZE(index_to_dp_signal_levels);
|
|
|
|
return index_to_dp_signal_levels[n_entries - 1] &
|
|
DP_TRAIN_VOLTAGE_SWING_MASK;
|
|
}
|
|
|
|
/*
|
|
* We assume that the full set of pre-emphasis values can be
|
|
* used on all DDI platforms. Should that change we need to
|
|
* rethink this code.
|
|
*/
|
|
u8 intel_ddi_dp_pre_emphasis_max(struct intel_encoder *encoder, u8 voltage_swing)
|
|
{
|
|
switch (voltage_swing & DP_TRAIN_VOLTAGE_SWING_MASK) {
|
|
case DP_TRAIN_VOLTAGE_SWING_LEVEL_0:
|
|
return DP_TRAIN_PRE_EMPH_LEVEL_3;
|
|
case DP_TRAIN_VOLTAGE_SWING_LEVEL_1:
|
|
return DP_TRAIN_PRE_EMPH_LEVEL_2;
|
|
case DP_TRAIN_VOLTAGE_SWING_LEVEL_2:
|
|
return DP_TRAIN_PRE_EMPH_LEVEL_1;
|
|
case DP_TRAIN_VOLTAGE_SWING_LEVEL_3:
|
|
default:
|
|
return DP_TRAIN_PRE_EMPH_LEVEL_0;
|
|
}
|
|
}
|
|
|
|
static void cnl_ddi_vswing_program(struct intel_encoder *encoder,
|
|
int level, enum intel_output_type type)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
const struct cnl_ddi_buf_trans *ddi_translations;
|
|
enum port port = encoder->port;
|
|
int n_entries, ln;
|
|
u32 val;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI)
|
|
ddi_translations = cnl_get_buf_trans_hdmi(dev_priv, &n_entries);
|
|
else if (type == INTEL_OUTPUT_EDP)
|
|
ddi_translations = cnl_get_buf_trans_edp(dev_priv, &n_entries);
|
|
else
|
|
ddi_translations = cnl_get_buf_trans_dp(dev_priv, &n_entries);
|
|
|
|
if (WARN_ON_ONCE(!ddi_translations))
|
|
return;
|
|
if (WARN_ON_ONCE(level >= n_entries))
|
|
level = n_entries - 1;
|
|
|
|
/* Set PORT_TX_DW5 Scaling Mode Sel to 010b. */
|
|
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
|
|
val &= ~SCALING_MODE_SEL_MASK;
|
|
val |= SCALING_MODE_SEL(2);
|
|
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW2 */
|
|
val = I915_READ(CNL_PORT_TX_DW2_LN0(port));
|
|
val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
|
|
RCOMP_SCALAR_MASK);
|
|
val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_sel);
|
|
val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_sel);
|
|
/* Rcomp scalar is fixed as 0x98 for every table entry */
|
|
val |= RCOMP_SCALAR(0x98);
|
|
I915_WRITE(CNL_PORT_TX_DW2_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW4 */
|
|
/* We cannot write to GRP. It would overrite individual loadgen */
|
|
for (ln = 0; ln < 4; ln++) {
|
|
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
|
|
val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
|
|
CURSOR_COEFF_MASK);
|
|
val |= POST_CURSOR_1(ddi_translations[level].dw4_post_cursor_1);
|
|
val |= POST_CURSOR_2(ddi_translations[level].dw4_post_cursor_2);
|
|
val |= CURSOR_COEFF(ddi_translations[level].dw4_cursor_coeff);
|
|
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
|
|
}
|
|
|
|
/* Program PORT_TX_DW5 */
|
|
/* All DW5 values are fixed for every table entry */
|
|
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
|
|
val &= ~RTERM_SELECT_MASK;
|
|
val |= RTERM_SELECT(6);
|
|
val |= TAP3_DISABLE;
|
|
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW7 */
|
|
val = I915_READ(CNL_PORT_TX_DW7_LN0(port));
|
|
val &= ~N_SCALAR_MASK;
|
|
val |= N_SCALAR(ddi_translations[level].dw7_n_scalar);
|
|
I915_WRITE(CNL_PORT_TX_DW7_GRP(port), val);
|
|
}
|
|
|
|
static void cnl_ddi_vswing_sequence(struct intel_encoder *encoder,
|
|
int level, enum intel_output_type type)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int width, rate, ln;
|
|
u32 val;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI) {
|
|
width = 4;
|
|
rate = 0; /* Rate is always < than 6GHz for HDMI */
|
|
} else {
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
|
|
width = intel_dp->lane_count;
|
|
rate = intel_dp->link_rate;
|
|
}
|
|
|
|
/*
|
|
* 1. If port type is eDP or DP,
|
|
* set PORT_PCS_DW1 cmnkeeper_enable to 1b,
|
|
* else clear to 0b.
|
|
*/
|
|
val = I915_READ(CNL_PORT_PCS_DW1_LN0(port));
|
|
if (type != INTEL_OUTPUT_HDMI)
|
|
val |= COMMON_KEEPER_EN;
|
|
else
|
|
val &= ~COMMON_KEEPER_EN;
|
|
I915_WRITE(CNL_PORT_PCS_DW1_GRP(port), val);
|
|
|
|
/* 2. Program loadgen select */
|
|
/*
|
|
* Program PORT_TX_DW4_LN depending on Bit rate and used lanes
|
|
* <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1)
|
|
* <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0)
|
|
* > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
|
|
*/
|
|
for (ln = 0; ln <= 3; ln++) {
|
|
val = I915_READ(CNL_PORT_TX_DW4_LN(port, ln));
|
|
val &= ~LOADGEN_SELECT;
|
|
|
|
if ((rate <= 600000 && width == 4 && ln >= 1) ||
|
|
(rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
|
|
val |= LOADGEN_SELECT;
|
|
}
|
|
I915_WRITE(CNL_PORT_TX_DW4_LN(port, ln), val);
|
|
}
|
|
|
|
/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
|
|
val = I915_READ(CNL_PORT_CL1CM_DW5);
|
|
val |= SUS_CLOCK_CONFIG;
|
|
I915_WRITE(CNL_PORT_CL1CM_DW5, val);
|
|
|
|
/* 4. Clear training enable to change swing values */
|
|
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
|
|
val &= ~TX_TRAINING_EN;
|
|
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* 5. Program swing and de-emphasis */
|
|
cnl_ddi_vswing_program(encoder, level, type);
|
|
|
|
/* 6. Set training enable to trigger update */
|
|
val = I915_READ(CNL_PORT_TX_DW5_LN0(port));
|
|
val |= TX_TRAINING_EN;
|
|
I915_WRITE(CNL_PORT_TX_DW5_GRP(port), val);
|
|
}
|
|
|
|
static void icl_ddi_combo_vswing_program(struct drm_i915_private *dev_priv,
|
|
u32 level, enum port port, int type)
|
|
{
|
|
const struct icl_combo_phy_ddi_buf_trans *ddi_translations = NULL;
|
|
u32 n_entries, val;
|
|
int ln;
|
|
|
|
ddi_translations = icl_get_combo_buf_trans(dev_priv, port, type,
|
|
&n_entries);
|
|
if (!ddi_translations)
|
|
return;
|
|
|
|
if (level >= n_entries) {
|
|
DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.", level, n_entries - 1);
|
|
level = n_entries - 1;
|
|
}
|
|
|
|
/* Set PORT_TX_DW5 Rterm Sel to 110b. */
|
|
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
|
|
val &= ~RTERM_SELECT_MASK;
|
|
val |= RTERM_SELECT(0x6);
|
|
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW5 */
|
|
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
|
|
/* Set DisableTap2 and DisableTap3 if MIPI DSI
|
|
* Clear DisableTap2 and DisableTap3 for all other Ports
|
|
*/
|
|
if (type == INTEL_OUTPUT_DSI) {
|
|
val |= TAP2_DISABLE;
|
|
val |= TAP3_DISABLE;
|
|
} else {
|
|
val &= ~TAP2_DISABLE;
|
|
val &= ~TAP3_DISABLE;
|
|
}
|
|
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW2 */
|
|
val = I915_READ(ICL_PORT_TX_DW2_LN0(port));
|
|
val &= ~(SWING_SEL_LOWER_MASK | SWING_SEL_UPPER_MASK |
|
|
RCOMP_SCALAR_MASK);
|
|
val |= SWING_SEL_UPPER(ddi_translations[level].dw2_swing_select);
|
|
val |= SWING_SEL_LOWER(ddi_translations[level].dw2_swing_select);
|
|
/* Program Rcomp scalar for every table entry */
|
|
val |= RCOMP_SCALAR(ddi_translations[level].dw2_swing_scalar);
|
|
I915_WRITE(ICL_PORT_TX_DW2_GRP(port), val);
|
|
|
|
/* Program PORT_TX_DW4 */
|
|
/* We cannot write to GRP. It would overwrite individual loadgen. */
|
|
for (ln = 0; ln <= 3; ln++) {
|
|
val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
|
|
val &= ~(POST_CURSOR_1_MASK | POST_CURSOR_2_MASK |
|
|
CURSOR_COEFF_MASK);
|
|
val |= ddi_translations[level].dw4_scaling;
|
|
I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
|
|
}
|
|
}
|
|
|
|
static void icl_combo_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
|
|
u32 level,
|
|
enum intel_output_type type)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int width = 0;
|
|
int rate = 0;
|
|
u32 val;
|
|
int ln = 0;
|
|
|
|
if (type == INTEL_OUTPUT_HDMI) {
|
|
width = 4;
|
|
/* Rate is always < than 6GHz for HDMI */
|
|
} else {
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
|
|
width = intel_dp->lane_count;
|
|
rate = intel_dp->link_rate;
|
|
}
|
|
|
|
/*
|
|
* 1. If port type is eDP or DP,
|
|
* set PORT_PCS_DW1 cmnkeeper_enable to 1b,
|
|
* else clear to 0b.
|
|
*/
|
|
val = I915_READ(ICL_PORT_PCS_DW1_LN0(port));
|
|
if (type == INTEL_OUTPUT_HDMI)
|
|
val &= ~COMMON_KEEPER_EN;
|
|
else
|
|
val |= COMMON_KEEPER_EN;
|
|
I915_WRITE(ICL_PORT_PCS_DW1_GRP(port), val);
|
|
|
|
/* 2. Program loadgen select */
|
|
/*
|
|
* Program PORT_TX_DW4_LN depending on Bit rate and used lanes
|
|
* <= 6 GHz and 4 lanes (LN0=0, LN1=1, LN2=1, LN3=1)
|
|
* <= 6 GHz and 1,2 lanes (LN0=0, LN1=1, LN2=1, LN3=0)
|
|
* > 6 GHz (LN0=0, LN1=0, LN2=0, LN3=0)
|
|
*/
|
|
for (ln = 0; ln <= 3; ln++) {
|
|
val = I915_READ(ICL_PORT_TX_DW4_LN(port, ln));
|
|
val &= ~LOADGEN_SELECT;
|
|
|
|
if ((rate <= 600000 && width == 4 && ln >= 1) ||
|
|
(rate <= 600000 && width < 4 && (ln == 1 || ln == 2))) {
|
|
val |= LOADGEN_SELECT;
|
|
}
|
|
I915_WRITE(ICL_PORT_TX_DW4_LN(port, ln), val);
|
|
}
|
|
|
|
/* 3. Set PORT_CL_DW5 SUS Clock Config to 11b */
|
|
val = I915_READ(ICL_PORT_CL_DW5(port));
|
|
val |= SUS_CLOCK_CONFIG;
|
|
I915_WRITE(ICL_PORT_CL_DW5(port), val);
|
|
|
|
/* 4. Clear training enable to change swing values */
|
|
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
|
|
val &= ~TX_TRAINING_EN;
|
|
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
|
|
|
|
/* 5. Program swing and de-emphasis */
|
|
icl_ddi_combo_vswing_program(dev_priv, level, port, type);
|
|
|
|
/* 6. Set training enable to trigger update */
|
|
val = I915_READ(ICL_PORT_TX_DW5_LN0(port));
|
|
val |= TX_TRAINING_EN;
|
|
I915_WRITE(ICL_PORT_TX_DW5_GRP(port), val);
|
|
}
|
|
|
|
static void icl_mg_phy_ddi_vswing_sequence(struct intel_encoder *encoder,
|
|
int link_clock,
|
|
u32 level)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
const struct icl_mg_phy_ddi_buf_trans *ddi_translations;
|
|
u32 n_entries, val;
|
|
int ln;
|
|
|
|
n_entries = ARRAY_SIZE(icl_mg_phy_ddi_translations);
|
|
ddi_translations = icl_mg_phy_ddi_translations;
|
|
/* The table does not have values for level 3 and level 9. */
|
|
if (level >= n_entries || level == 3 || level == 9) {
|
|
DRM_DEBUG_KMS("DDI translation not found for level %d. Using %d instead.",
|
|
level, n_entries - 2);
|
|
level = n_entries - 2;
|
|
}
|
|
|
|
/* Set MG_TX_LINK_PARAMS cri_use_fs32 to 0. */
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_TX1_LINK_PARAMS(port, ln));
|
|
val &= ~CRI_USE_FS32;
|
|
I915_WRITE(MG_TX1_LINK_PARAMS(port, ln), val);
|
|
|
|
val = I915_READ(MG_TX2_LINK_PARAMS(port, ln));
|
|
val &= ~CRI_USE_FS32;
|
|
I915_WRITE(MG_TX2_LINK_PARAMS(port, ln), val);
|
|
}
|
|
|
|
/* Program MG_TX_SWINGCTRL with values from vswing table */
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_TX1_SWINGCTRL(port, ln));
|
|
val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK;
|
|
val |= CRI_TXDEEMPH_OVERRIDE_17_12(
|
|
ddi_translations[level].cri_txdeemph_override_17_12);
|
|
I915_WRITE(MG_TX1_SWINGCTRL(port, ln), val);
|
|
|
|
val = I915_READ(MG_TX2_SWINGCTRL(port, ln));
|
|
val &= ~CRI_TXDEEMPH_OVERRIDE_17_12_MASK;
|
|
val |= CRI_TXDEEMPH_OVERRIDE_17_12(
|
|
ddi_translations[level].cri_txdeemph_override_17_12);
|
|
I915_WRITE(MG_TX2_SWINGCTRL(port, ln), val);
|
|
}
|
|
|
|
/* Program MG_TX_DRVCTRL with values from vswing table */
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_TX1_DRVCTRL(port, ln));
|
|
val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK |
|
|
CRI_TXDEEMPH_OVERRIDE_5_0_MASK);
|
|
val |= CRI_TXDEEMPH_OVERRIDE_5_0(
|
|
ddi_translations[level].cri_txdeemph_override_5_0) |
|
|
CRI_TXDEEMPH_OVERRIDE_11_6(
|
|
ddi_translations[level].cri_txdeemph_override_11_6) |
|
|
CRI_TXDEEMPH_OVERRIDE_EN;
|
|
I915_WRITE(MG_TX1_DRVCTRL(port, ln), val);
|
|
|
|
val = I915_READ(MG_TX2_DRVCTRL(port, ln));
|
|
val &= ~(CRI_TXDEEMPH_OVERRIDE_11_6_MASK |
|
|
CRI_TXDEEMPH_OVERRIDE_5_0_MASK);
|
|
val |= CRI_TXDEEMPH_OVERRIDE_5_0(
|
|
ddi_translations[level].cri_txdeemph_override_5_0) |
|
|
CRI_TXDEEMPH_OVERRIDE_11_6(
|
|
ddi_translations[level].cri_txdeemph_override_11_6) |
|
|
CRI_TXDEEMPH_OVERRIDE_EN;
|
|
I915_WRITE(MG_TX2_DRVCTRL(port, ln), val);
|
|
|
|
/* FIXME: Program CRI_LOADGEN_SEL after the spec is updated */
|
|
}
|
|
|
|
/*
|
|
* Program MG_CLKHUB<LN, port being used> with value from frequency table
|
|
* In case of Legacy mode on MG PHY, both TX1 and TX2 enabled so use the
|
|
* values from table for which TX1 and TX2 enabled.
|
|
*/
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_CLKHUB(port, ln));
|
|
if (link_clock < 300000)
|
|
val |= CFG_LOW_RATE_LKREN_EN;
|
|
else
|
|
val &= ~CFG_LOW_RATE_LKREN_EN;
|
|
I915_WRITE(MG_CLKHUB(port, ln), val);
|
|
}
|
|
|
|
/* Program the MG_TX_DCC<LN, port being used> based on the link frequency */
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_TX1_DCC(port, ln));
|
|
val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK;
|
|
if (link_clock <= 500000) {
|
|
val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN;
|
|
} else {
|
|
val |= CFG_AMI_CK_DIV_OVERRIDE_EN |
|
|
CFG_AMI_CK_DIV_OVERRIDE_VAL(1);
|
|
}
|
|
I915_WRITE(MG_TX1_DCC(port, ln), val);
|
|
|
|
val = I915_READ(MG_TX2_DCC(port, ln));
|
|
val &= ~CFG_AMI_CK_DIV_OVERRIDE_VAL_MASK;
|
|
if (link_clock <= 500000) {
|
|
val &= ~CFG_AMI_CK_DIV_OVERRIDE_EN;
|
|
} else {
|
|
val |= CFG_AMI_CK_DIV_OVERRIDE_EN |
|
|
CFG_AMI_CK_DIV_OVERRIDE_VAL(1);
|
|
}
|
|
I915_WRITE(MG_TX2_DCC(port, ln), val);
|
|
}
|
|
|
|
/* Program MG_TX_PISO_READLOAD with values from vswing table */
|
|
for (ln = 0; ln < 2; ln++) {
|
|
val = I915_READ(MG_TX1_PISO_READLOAD(port, ln));
|
|
val |= CRI_CALCINIT;
|
|
I915_WRITE(MG_TX1_PISO_READLOAD(port, ln), val);
|
|
|
|
val = I915_READ(MG_TX2_PISO_READLOAD(port, ln));
|
|
val |= CRI_CALCINIT;
|
|
I915_WRITE(MG_TX2_PISO_READLOAD(port, ln), val);
|
|
}
|
|
}
|
|
|
|
static void icl_ddi_vswing_sequence(struct intel_encoder *encoder,
|
|
int link_clock,
|
|
u32 level,
|
|
enum intel_output_type type)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
|
|
if (intel_port_is_combophy(dev_priv, port))
|
|
icl_combo_phy_ddi_vswing_sequence(encoder, level, type);
|
|
else
|
|
icl_mg_phy_ddi_vswing_sequence(encoder, link_clock, level);
|
|
}
|
|
|
|
static uint32_t translate_signal_level(int signal_levels)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(index_to_dp_signal_levels); i++) {
|
|
if (index_to_dp_signal_levels[i] == signal_levels)
|
|
return i;
|
|
}
|
|
|
|
WARN(1, "Unsupported voltage swing/pre-emphasis level: 0x%x\n",
|
|
signal_levels);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static uint32_t intel_ddi_dp_level(struct intel_dp *intel_dp)
|
|
{
|
|
uint8_t train_set = intel_dp->train_set[0];
|
|
int signal_levels = train_set & (DP_TRAIN_VOLTAGE_SWING_MASK |
|
|
DP_TRAIN_PRE_EMPHASIS_MASK);
|
|
|
|
return translate_signal_level(signal_levels);
|
|
}
|
|
|
|
u32 bxt_signal_levels(struct intel_dp *intel_dp)
|
|
{
|
|
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
|
|
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
|
|
struct intel_encoder *encoder = &dport->base;
|
|
int level = intel_ddi_dp_level(intel_dp);
|
|
|
|
if (IS_ICELAKE(dev_priv))
|
|
icl_ddi_vswing_sequence(encoder, intel_dp->link_rate,
|
|
level, encoder->type);
|
|
else if (IS_CANNONLAKE(dev_priv))
|
|
cnl_ddi_vswing_sequence(encoder, level, encoder->type);
|
|
else
|
|
bxt_ddi_vswing_sequence(encoder, level, encoder->type);
|
|
|
|
return 0;
|
|
}
|
|
|
|
uint32_t ddi_signal_levels(struct intel_dp *intel_dp)
|
|
{
|
|
struct intel_digital_port *dport = dp_to_dig_port(intel_dp);
|
|
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
|
|
struct intel_encoder *encoder = &dport->base;
|
|
int level = intel_ddi_dp_level(intel_dp);
|
|
|
|
if (IS_GEN9_BC(dev_priv))
|
|
skl_ddi_set_iboost(encoder, level, encoder->type);
|
|
|
|
return DDI_BUF_TRANS_SELECT(level);
|
|
}
|
|
|
|
static inline
|
|
uint32_t icl_dpclka_cfgcr0_clk_off(struct drm_i915_private *dev_priv,
|
|
enum port port)
|
|
{
|
|
if (intel_port_is_combophy(dev_priv, port)) {
|
|
return ICL_DPCLKA_CFGCR0_DDI_CLK_OFF(port);
|
|
} else if (intel_port_is_tc(dev_priv, port)) {
|
|
enum tc_port tc_port = intel_port_to_tc(dev_priv, port);
|
|
|
|
return ICL_DPCLKA_CFGCR0_TC_CLK_OFF(tc_port);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void icl_map_plls_to_ports(struct drm_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct drm_atomic_state *old_state)
|
|
{
|
|
struct intel_shared_dpll *pll = crtc_state->shared_dpll;
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
|
|
struct drm_connector_state *conn_state;
|
|
struct drm_connector *conn;
|
|
int i;
|
|
|
|
for_each_new_connector_in_state(old_state, conn, conn_state, i) {
|
|
struct intel_encoder *encoder =
|
|
to_intel_encoder(conn_state->best_encoder);
|
|
enum port port;
|
|
uint32_t val;
|
|
|
|
if (conn_state->crtc != crtc)
|
|
continue;
|
|
|
|
port = encoder->port;
|
|
mutex_lock(&dev_priv->dpll_lock);
|
|
|
|
val = I915_READ(DPCLKA_CFGCR0_ICL);
|
|
WARN_ON((val & icl_dpclka_cfgcr0_clk_off(dev_priv, port)) == 0);
|
|
|
|
if (intel_port_is_combophy(dev_priv, port)) {
|
|
val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
|
|
val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port);
|
|
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
|
|
POSTING_READ(DPCLKA_CFGCR0_ICL);
|
|
}
|
|
|
|
val &= ~icl_dpclka_cfgcr0_clk_off(dev_priv, port);
|
|
I915_WRITE(DPCLKA_CFGCR0_ICL, val);
|
|
|
|
mutex_unlock(&dev_priv->dpll_lock);
|
|
}
|
|
}
|
|
|
|
void icl_unmap_plls_to_ports(struct drm_crtc *crtc,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct drm_atomic_state *old_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->dev);
|
|
struct drm_connector_state *old_conn_state;
|
|
struct drm_connector *conn;
|
|
int i;
|
|
|
|
for_each_old_connector_in_state(old_state, conn, old_conn_state, i) {
|
|
struct intel_encoder *encoder =
|
|
to_intel_encoder(old_conn_state->best_encoder);
|
|
enum port port;
|
|
|
|
if (old_conn_state->crtc != crtc)
|
|
continue;
|
|
|
|
port = encoder->port;
|
|
mutex_lock(&dev_priv->dpll_lock);
|
|
I915_WRITE(DPCLKA_CFGCR0_ICL,
|
|
I915_READ(DPCLKA_CFGCR0_ICL) |
|
|
icl_dpclka_cfgcr0_clk_off(dev_priv, port));
|
|
mutex_unlock(&dev_priv->dpll_lock);
|
|
}
|
|
}
|
|
|
|
static void intel_ddi_clk_select(struct intel_encoder *encoder,
|
|
const struct intel_shared_dpll *pll)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
uint32_t val;
|
|
|
|
if (WARN_ON(!pll))
|
|
return;
|
|
|
|
mutex_lock(&dev_priv->dpll_lock);
|
|
|
|
if (IS_ICELAKE(dev_priv)) {
|
|
if (!intel_port_is_combophy(dev_priv, port))
|
|
I915_WRITE(DDI_CLK_SEL(port),
|
|
icl_pll_to_ddi_pll_sel(encoder, pll));
|
|
} else if (IS_CANNONLAKE(dev_priv)) {
|
|
/* Configure DPCLKA_CFGCR0 to map the DPLL to the DDI. */
|
|
val = I915_READ(DPCLKA_CFGCR0);
|
|
val &= ~DPCLKA_CFGCR0_DDI_CLK_SEL_MASK(port);
|
|
val |= DPCLKA_CFGCR0_DDI_CLK_SEL(pll->info->id, port);
|
|
I915_WRITE(DPCLKA_CFGCR0, val);
|
|
|
|
/*
|
|
* Configure DPCLKA_CFGCR0 to turn on the clock for the DDI.
|
|
* This step and the step before must be done with separate
|
|
* register writes.
|
|
*/
|
|
val = I915_READ(DPCLKA_CFGCR0);
|
|
val &= ~DPCLKA_CFGCR0_DDI_CLK_OFF(port);
|
|
I915_WRITE(DPCLKA_CFGCR0, val);
|
|
} else if (IS_GEN9_BC(dev_priv)) {
|
|
/* DDI -> PLL mapping */
|
|
val = I915_READ(DPLL_CTRL2);
|
|
|
|
val &= ~(DPLL_CTRL2_DDI_CLK_OFF(port) |
|
|
DPLL_CTRL2_DDI_CLK_SEL_MASK(port));
|
|
val |= (DPLL_CTRL2_DDI_CLK_SEL(pll->info->id, port) |
|
|
DPLL_CTRL2_DDI_SEL_OVERRIDE(port));
|
|
|
|
I915_WRITE(DPLL_CTRL2, val);
|
|
|
|
} else if (INTEL_GEN(dev_priv) < 9) {
|
|
I915_WRITE(PORT_CLK_SEL(port), hsw_pll_to_ddi_pll_sel(pll));
|
|
}
|
|
|
|
mutex_unlock(&dev_priv->dpll_lock);
|
|
}
|
|
|
|
static void intel_ddi_clk_disable(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
|
|
if (IS_ICELAKE(dev_priv)) {
|
|
if (!intel_port_is_combophy(dev_priv, port))
|
|
I915_WRITE(DDI_CLK_SEL(port), DDI_CLK_SEL_NONE);
|
|
} else if (IS_CANNONLAKE(dev_priv)) {
|
|
I915_WRITE(DPCLKA_CFGCR0, I915_READ(DPCLKA_CFGCR0) |
|
|
DPCLKA_CFGCR0_DDI_CLK_OFF(port));
|
|
} else if (IS_GEN9_BC(dev_priv)) {
|
|
I915_WRITE(DPLL_CTRL2, I915_READ(DPLL_CTRL2) |
|
|
DPLL_CTRL2_DDI_CLK_OFF(port));
|
|
} else if (INTEL_GEN(dev_priv) < 9) {
|
|
I915_WRITE(PORT_CLK_SEL(port), PORT_CLK_SEL_NONE);
|
|
}
|
|
}
|
|
|
|
static void intel_ddi_pre_enable_dp(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
|
|
bool is_mst = intel_crtc_has_type(crtc_state, INTEL_OUTPUT_DP_MST);
|
|
int level = intel_ddi_dp_level(intel_dp);
|
|
|
|
WARN_ON(is_mst && (port == PORT_A || port == PORT_E));
|
|
|
|
intel_display_power_get(dev_priv,
|
|
intel_ddi_main_link_aux_domain(intel_dp));
|
|
|
|
intel_dp_set_link_params(intel_dp, crtc_state->port_clock,
|
|
crtc_state->lane_count, is_mst);
|
|
|
|
intel_edp_panel_on(intel_dp);
|
|
|
|
intel_ddi_clk_select(encoder, crtc_state->shared_dpll);
|
|
|
|
intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
|
|
|
|
icl_program_mg_dp_mode(intel_dp);
|
|
icl_disable_phy_clock_gating(dig_port);
|
|
|
|
if (IS_ICELAKE(dev_priv))
|
|
icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
|
|
level, encoder->type);
|
|
else if (IS_CANNONLAKE(dev_priv))
|
|
cnl_ddi_vswing_sequence(encoder, level, encoder->type);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
bxt_ddi_vswing_sequence(encoder, level, encoder->type);
|
|
else
|
|
intel_prepare_dp_ddi_buffers(encoder, crtc_state);
|
|
|
|
intel_ddi_init_dp_buf_reg(encoder);
|
|
if (!is_mst)
|
|
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_ON);
|
|
intel_dp_start_link_train(intel_dp);
|
|
if (port != PORT_A || INTEL_GEN(dev_priv) >= 9)
|
|
intel_dp_stop_link_train(intel_dp);
|
|
|
|
icl_enable_phy_clock_gating(dig_port);
|
|
|
|
if (!is_mst)
|
|
intel_ddi_enable_pipe_clock(crtc_state);
|
|
}
|
|
|
|
static void intel_ddi_pre_enable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_digital_port *intel_dig_port = enc_to_dig_port(&encoder->base);
|
|
struct intel_hdmi *intel_hdmi = &intel_dig_port->hdmi;
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int level = intel_ddi_hdmi_level(dev_priv, port);
|
|
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
|
|
|
|
intel_dp_dual_mode_set_tmds_output(intel_hdmi, true);
|
|
intel_ddi_clk_select(encoder, crtc_state->shared_dpll);
|
|
|
|
intel_display_power_get(dev_priv, dig_port->ddi_io_power_domain);
|
|
|
|
if (IS_ICELAKE(dev_priv))
|
|
icl_ddi_vswing_sequence(encoder, crtc_state->port_clock,
|
|
level, INTEL_OUTPUT_HDMI);
|
|
else if (IS_CANNONLAKE(dev_priv))
|
|
cnl_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI);
|
|
else if (IS_GEN9_LP(dev_priv))
|
|
bxt_ddi_vswing_sequence(encoder, level, INTEL_OUTPUT_HDMI);
|
|
else
|
|
intel_prepare_hdmi_ddi_buffers(encoder, level);
|
|
|
|
if (IS_GEN9_BC(dev_priv))
|
|
skl_ddi_set_iboost(encoder, level, INTEL_OUTPUT_HDMI);
|
|
|
|
intel_ddi_enable_pipe_clock(crtc_state);
|
|
|
|
intel_dig_port->set_infoframes(&encoder->base,
|
|
crtc_state->has_infoframe,
|
|
crtc_state, conn_state);
|
|
}
|
|
|
|
static void intel_ddi_pre_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct intel_crtc *crtc = to_intel_crtc(crtc_state->base.crtc);
|
|
struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
|
|
enum pipe pipe = crtc->pipe;
|
|
|
|
/*
|
|
* When called from DP MST code:
|
|
* - conn_state will be NULL
|
|
* - encoder will be the main encoder (ie. mst->primary)
|
|
* - the main connector associated with this port
|
|
* won't be active or linked to a crtc
|
|
* - crtc_state will be the state of the first stream to
|
|
* be activated on this port, and it may not be the same
|
|
* stream that will be deactivated last, but each stream
|
|
* should have a state that is identical when it comes to
|
|
* the DP link parameteres
|
|
*/
|
|
|
|
WARN_ON(crtc_state->has_pch_encoder);
|
|
|
|
intel_set_cpu_fifo_underrun_reporting(dev_priv, pipe, true);
|
|
|
|
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
|
|
intel_ddi_pre_enable_hdmi(encoder, crtc_state, conn_state);
|
|
else
|
|
intel_ddi_pre_enable_dp(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void intel_disable_ddi_buf(struct intel_encoder *encoder)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
bool wait = false;
|
|
u32 val;
|
|
|
|
val = I915_READ(DDI_BUF_CTL(port));
|
|
if (val & DDI_BUF_CTL_ENABLE) {
|
|
val &= ~DDI_BUF_CTL_ENABLE;
|
|
I915_WRITE(DDI_BUF_CTL(port), val);
|
|
wait = true;
|
|
}
|
|
|
|
val = I915_READ(DP_TP_CTL(port));
|
|
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
|
|
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
|
|
I915_WRITE(DP_TP_CTL(port), val);
|
|
|
|
if (wait)
|
|
intel_wait_ddi_buf_idle(dev_priv, port);
|
|
}
|
|
|
|
static void intel_ddi_post_disable_dp(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
|
|
struct intel_dp *intel_dp = &dig_port->dp;
|
|
bool is_mst = intel_crtc_has_type(old_crtc_state,
|
|
INTEL_OUTPUT_DP_MST);
|
|
|
|
if (!is_mst) {
|
|
intel_ddi_disable_pipe_clock(old_crtc_state);
|
|
/*
|
|
* Power down sink before disabling the port, otherwise we end
|
|
* up getting interrupts from the sink on detecting link loss.
|
|
*/
|
|
intel_dp_sink_dpms(intel_dp, DRM_MODE_DPMS_OFF);
|
|
}
|
|
|
|
intel_disable_ddi_buf(encoder);
|
|
|
|
intel_edp_panel_vdd_on(intel_dp);
|
|
intel_edp_panel_off(intel_dp);
|
|
|
|
intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain);
|
|
|
|
intel_ddi_clk_disable(encoder);
|
|
|
|
intel_display_power_put(dev_priv,
|
|
intel_ddi_main_link_aux_domain(intel_dp));
|
|
}
|
|
|
|
static void intel_ddi_post_disable_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
|
|
struct intel_hdmi *intel_hdmi = &dig_port->hdmi;
|
|
|
|
dig_port->set_infoframes(&encoder->base, false,
|
|
old_crtc_state, old_conn_state);
|
|
|
|
intel_ddi_disable_pipe_clock(old_crtc_state);
|
|
|
|
intel_disable_ddi_buf(encoder);
|
|
|
|
intel_display_power_put(dev_priv, dig_port->ddi_io_power_domain);
|
|
|
|
intel_ddi_clk_disable(encoder);
|
|
|
|
intel_dp_dual_mode_set_tmds_output(intel_hdmi, false);
|
|
}
|
|
|
|
static void intel_ddi_post_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
/*
|
|
* When called from DP MST code:
|
|
* - old_conn_state will be NULL
|
|
* - encoder will be the main encoder (ie. mst->primary)
|
|
* - the main connector associated with this port
|
|
* won't be active or linked to a crtc
|
|
* - old_crtc_state will be the state of the last stream to
|
|
* be deactivated on this port, and it may not be the same
|
|
* stream that was activated last, but each stream
|
|
* should have a state that is identical when it comes to
|
|
* the DP link parameteres
|
|
*/
|
|
|
|
if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
|
|
intel_ddi_post_disable_hdmi(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
else
|
|
intel_ddi_post_disable_dp(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
}
|
|
|
|
void intel_ddi_fdi_post_disable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
uint32_t val;
|
|
|
|
/*
|
|
* Bspec lists this as both step 13 (before DDI_BUF_CTL disable)
|
|
* and step 18 (after clearing PORT_CLK_SEL). Based on a BUN,
|
|
* step 13 is the correct place for it. Step 18 is where it was
|
|
* originally before the BUN.
|
|
*/
|
|
val = I915_READ(FDI_RX_CTL(PIPE_A));
|
|
val &= ~FDI_RX_ENABLE;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
|
|
|
|
intel_disable_ddi_buf(encoder);
|
|
intel_ddi_clk_disable(encoder);
|
|
|
|
val = I915_READ(FDI_RX_MISC(PIPE_A));
|
|
val &= ~(FDI_RX_PWRDN_LANE1_MASK | FDI_RX_PWRDN_LANE0_MASK);
|
|
val |= FDI_RX_PWRDN_LANE1_VAL(2) | FDI_RX_PWRDN_LANE0_VAL(2);
|
|
I915_WRITE(FDI_RX_MISC(PIPE_A), val);
|
|
|
|
val = I915_READ(FDI_RX_CTL(PIPE_A));
|
|
val &= ~FDI_PCDCLK;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
|
|
|
|
val = I915_READ(FDI_RX_CTL(PIPE_A));
|
|
val &= ~FDI_RX_PLL_ENABLE;
|
|
I915_WRITE(FDI_RX_CTL(PIPE_A), val);
|
|
}
|
|
|
|
static void intel_enable_ddi_dp(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
enum port port = encoder->port;
|
|
|
|
if (port == PORT_A && INTEL_GEN(dev_priv) < 9)
|
|
intel_dp_stop_link_train(intel_dp);
|
|
|
|
intel_edp_backlight_on(crtc_state, conn_state);
|
|
intel_psr_enable(intel_dp, crtc_state);
|
|
intel_edp_drrs_enable(intel_dp, crtc_state);
|
|
|
|
if (crtc_state->has_audio)
|
|
intel_audio_codec_enable(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void intel_enable_ddi_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_digital_port *dig_port = enc_to_dig_port(&encoder->base);
|
|
struct drm_connector *connector = conn_state->connector;
|
|
enum port port = encoder->port;
|
|
|
|
if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
|
|
crtc_state->hdmi_high_tmds_clock_ratio,
|
|
crtc_state->hdmi_scrambling))
|
|
DRM_ERROR("[CONNECTOR:%d:%s] Failed to configure sink scrambling/TMDS bit clock ratio\n",
|
|
connector->base.id, connector->name);
|
|
|
|
/* Display WA #1143: skl,kbl,cfl */
|
|
if (IS_GEN9_BC(dev_priv)) {
|
|
/*
|
|
* For some reason these chicken bits have been
|
|
* stuffed into a transcoder register, event though
|
|
* the bits affect a specific DDI port rather than
|
|
* a specific transcoder.
|
|
*/
|
|
static const enum transcoder port_to_transcoder[] = {
|
|
[PORT_A] = TRANSCODER_EDP,
|
|
[PORT_B] = TRANSCODER_A,
|
|
[PORT_C] = TRANSCODER_B,
|
|
[PORT_D] = TRANSCODER_C,
|
|
[PORT_E] = TRANSCODER_A,
|
|
};
|
|
enum transcoder transcoder = port_to_transcoder[port];
|
|
u32 val;
|
|
|
|
val = I915_READ(CHICKEN_TRANS(transcoder));
|
|
|
|
if (port == PORT_E)
|
|
val |= DDIE_TRAINING_OVERRIDE_ENABLE |
|
|
DDIE_TRAINING_OVERRIDE_VALUE;
|
|
else
|
|
val |= DDI_TRAINING_OVERRIDE_ENABLE |
|
|
DDI_TRAINING_OVERRIDE_VALUE;
|
|
|
|
I915_WRITE(CHICKEN_TRANS(transcoder), val);
|
|
POSTING_READ(CHICKEN_TRANS(transcoder));
|
|
|
|
udelay(1);
|
|
|
|
if (port == PORT_E)
|
|
val &= ~(DDIE_TRAINING_OVERRIDE_ENABLE |
|
|
DDIE_TRAINING_OVERRIDE_VALUE);
|
|
else
|
|
val &= ~(DDI_TRAINING_OVERRIDE_ENABLE |
|
|
DDI_TRAINING_OVERRIDE_VALUE);
|
|
|
|
I915_WRITE(CHICKEN_TRANS(transcoder), val);
|
|
}
|
|
|
|
/* In HDMI/DVI mode, the port width, and swing/emphasis values
|
|
* are ignored so nothing special needs to be done besides
|
|
* enabling the port.
|
|
*/
|
|
I915_WRITE(DDI_BUF_CTL(port),
|
|
dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE);
|
|
|
|
if (crtc_state->has_audio)
|
|
intel_audio_codec_enable(encoder, crtc_state, conn_state);
|
|
}
|
|
|
|
static void intel_enable_ddi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *crtc_state,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
if (intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI))
|
|
intel_enable_ddi_hdmi(encoder, crtc_state, conn_state);
|
|
else
|
|
intel_enable_ddi_dp(encoder, crtc_state, conn_state);
|
|
|
|
/* Enable hdcp if it's desired */
|
|
if (conn_state->content_protection ==
|
|
DRM_MODE_CONTENT_PROTECTION_DESIRED)
|
|
intel_hdcp_enable(to_intel_connector(conn_state->connector));
|
|
}
|
|
|
|
static void intel_disable_ddi_dp(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct intel_dp *intel_dp = enc_to_intel_dp(&encoder->base);
|
|
|
|
intel_dp->link_trained = false;
|
|
|
|
if (old_crtc_state->has_audio)
|
|
intel_audio_codec_disable(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
|
|
intel_edp_drrs_disable(intel_dp, old_crtc_state);
|
|
intel_psr_disable(intel_dp, old_crtc_state);
|
|
intel_edp_backlight_off(old_conn_state);
|
|
}
|
|
|
|
static void intel_disable_ddi_hdmi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
struct drm_connector *connector = old_conn_state->connector;
|
|
|
|
if (old_crtc_state->has_audio)
|
|
intel_audio_codec_disable(encoder,
|
|
old_crtc_state, old_conn_state);
|
|
|
|
if (!intel_hdmi_handle_sink_scrambling(encoder, connector,
|
|
false, false))
|
|
DRM_DEBUG_KMS("[CONNECTOR:%d:%s] Failed to reset sink scrambling/TMDS bit clock ratio\n",
|
|
connector->base.id, connector->name);
|
|
}
|
|
|
|
static void intel_disable_ddi(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *old_crtc_state,
|
|
const struct drm_connector_state *old_conn_state)
|
|
{
|
|
intel_hdcp_disable(to_intel_connector(old_conn_state->connector));
|
|
|
|
if (intel_crtc_has_type(old_crtc_state, INTEL_OUTPUT_HDMI))
|
|
intel_disable_ddi_hdmi(encoder, old_crtc_state, old_conn_state);
|
|
else
|
|
intel_disable_ddi_dp(encoder, old_crtc_state, old_conn_state);
|
|
}
|
|
|
|
static void bxt_ddi_pre_pll_enable(struct intel_encoder *encoder,
|
|
const struct intel_crtc_state *pipe_config,
|
|
const struct drm_connector_state *conn_state)
|
|
{
|
|
uint8_t mask = pipe_config->lane_lat_optim_mask;
|
|
|
|
bxt_ddi_phy_set_lane_optim_mask(encoder, mask);
|
|
}
|
|
|
|
void intel_ddi_prepare_link_retrain(struct intel_dp *intel_dp)
|
|
{
|
|
struct intel_digital_port *intel_dig_port = dp_to_dig_port(intel_dp);
|
|
struct drm_i915_private *dev_priv =
|
|
to_i915(intel_dig_port->base.base.dev);
|
|
enum port port = intel_dig_port->base.port;
|
|
uint32_t val;
|
|
bool wait = false;
|
|
|
|
if (I915_READ(DP_TP_CTL(port)) & DP_TP_CTL_ENABLE) {
|
|
val = I915_READ(DDI_BUF_CTL(port));
|
|
if (val & DDI_BUF_CTL_ENABLE) {
|
|
val &= ~DDI_BUF_CTL_ENABLE;
|
|
I915_WRITE(DDI_BUF_CTL(port), val);
|
|
wait = true;
|
|
}
|
|
|
|
val = I915_READ(DP_TP_CTL(port));
|
|
val &= ~(DP_TP_CTL_ENABLE | DP_TP_CTL_LINK_TRAIN_MASK);
|
|
val |= DP_TP_CTL_LINK_TRAIN_PAT1;
|
|
I915_WRITE(DP_TP_CTL(port), val);
|
|
POSTING_READ(DP_TP_CTL(port));
|
|
|
|
if (wait)
|
|
intel_wait_ddi_buf_idle(dev_priv, port);
|
|
}
|
|
|
|
val = DP_TP_CTL_ENABLE |
|
|
DP_TP_CTL_LINK_TRAIN_PAT1 | DP_TP_CTL_SCRAMBLE_DISABLE;
|
|
if (intel_dp->link_mst)
|
|
val |= DP_TP_CTL_MODE_MST;
|
|
else {
|
|
val |= DP_TP_CTL_MODE_SST;
|
|
if (drm_dp_enhanced_frame_cap(intel_dp->dpcd))
|
|
val |= DP_TP_CTL_ENHANCED_FRAME_ENABLE;
|
|
}
|
|
I915_WRITE(DP_TP_CTL(port), val);
|
|
POSTING_READ(DP_TP_CTL(port));
|
|
|
|
intel_dp->DP |= DDI_BUF_CTL_ENABLE;
|
|
I915_WRITE(DDI_BUF_CTL(port), intel_dp->DP);
|
|
POSTING_READ(DDI_BUF_CTL(port));
|
|
|
|
udelay(600);
|
|
}
|
|
|
|
static bool intel_ddi_is_audio_enabled(struct drm_i915_private *dev_priv,
|
|
enum transcoder cpu_transcoder)
|
|
{
|
|
if (cpu_transcoder == TRANSCODER_EDP)
|
|
return false;
|
|
|
|
if (!intel_display_power_is_enabled(dev_priv, POWER_DOMAIN_AUDIO))
|
|
return false;
|
|
|
|
return I915_READ(HSW_AUD_PIN_ELD_CP_VLD) &
|
|
AUDIO_OUTPUT_ENABLE(cpu_transcoder);
|
|
}
|
|
|
|
void intel_ddi_compute_min_voltage_level(struct drm_i915_private *dev_priv,
|
|
struct intel_crtc_state *crtc_state)
|
|
{
|
|
if (IS_CANNONLAKE(dev_priv) && crtc_state->port_clock > 594000)
|
|
crtc_state->min_voltage_level = 2;
|
|
else if (IS_ICELAKE(dev_priv) && crtc_state->port_clock > 594000)
|
|
crtc_state->min_voltage_level = 1;
|
|
}
|
|
|
|
void intel_ddi_get_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_crtc *intel_crtc = to_intel_crtc(pipe_config->base.crtc);
|
|
enum transcoder cpu_transcoder = pipe_config->cpu_transcoder;
|
|
struct intel_digital_port *intel_dig_port;
|
|
u32 temp, flags = 0;
|
|
|
|
/* XXX: DSI transcoder paranoia */
|
|
if (WARN_ON(transcoder_is_dsi(cpu_transcoder)))
|
|
return;
|
|
|
|
temp = I915_READ(TRANS_DDI_FUNC_CTL(cpu_transcoder));
|
|
if (temp & TRANS_DDI_PHSYNC)
|
|
flags |= DRM_MODE_FLAG_PHSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NHSYNC;
|
|
if (temp & TRANS_DDI_PVSYNC)
|
|
flags |= DRM_MODE_FLAG_PVSYNC;
|
|
else
|
|
flags |= DRM_MODE_FLAG_NVSYNC;
|
|
|
|
pipe_config->base.adjusted_mode.flags |= flags;
|
|
|
|
switch (temp & TRANS_DDI_BPC_MASK) {
|
|
case TRANS_DDI_BPC_6:
|
|
pipe_config->pipe_bpp = 18;
|
|
break;
|
|
case TRANS_DDI_BPC_8:
|
|
pipe_config->pipe_bpp = 24;
|
|
break;
|
|
case TRANS_DDI_BPC_10:
|
|
pipe_config->pipe_bpp = 30;
|
|
break;
|
|
case TRANS_DDI_BPC_12:
|
|
pipe_config->pipe_bpp = 36;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
switch (temp & TRANS_DDI_MODE_SELECT_MASK) {
|
|
case TRANS_DDI_MODE_SELECT_HDMI:
|
|
pipe_config->has_hdmi_sink = true;
|
|
intel_dig_port = enc_to_dig_port(&encoder->base);
|
|
|
|
if (intel_dig_port->infoframe_enabled(&encoder->base, pipe_config))
|
|
pipe_config->has_infoframe = true;
|
|
|
|
if ((temp & TRANS_DDI_HDMI_SCRAMBLING_MASK) ==
|
|
TRANS_DDI_HDMI_SCRAMBLING_MASK)
|
|
pipe_config->hdmi_scrambling = true;
|
|
if (temp & TRANS_DDI_HIGH_TMDS_CHAR_RATE)
|
|
pipe_config->hdmi_high_tmds_clock_ratio = true;
|
|
/* fall through */
|
|
case TRANS_DDI_MODE_SELECT_DVI:
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_HDMI);
|
|
pipe_config->lane_count = 4;
|
|
break;
|
|
case TRANS_DDI_MODE_SELECT_FDI:
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_ANALOG);
|
|
break;
|
|
case TRANS_DDI_MODE_SELECT_DP_SST:
|
|
if (encoder->type == INTEL_OUTPUT_EDP)
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_EDP);
|
|
else
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_DP);
|
|
pipe_config->lane_count =
|
|
((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
|
|
intel_dp_get_m_n(intel_crtc, pipe_config);
|
|
break;
|
|
case TRANS_DDI_MODE_SELECT_DP_MST:
|
|
pipe_config->output_types |= BIT(INTEL_OUTPUT_DP_MST);
|
|
pipe_config->lane_count =
|
|
((temp & DDI_PORT_WIDTH_MASK) >> DDI_PORT_WIDTH_SHIFT) + 1;
|
|
intel_dp_get_m_n(intel_crtc, pipe_config);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
pipe_config->has_audio =
|
|
intel_ddi_is_audio_enabled(dev_priv, cpu_transcoder);
|
|
|
|
if (encoder->type == INTEL_OUTPUT_EDP && dev_priv->vbt.edp.bpp &&
|
|
pipe_config->pipe_bpp > dev_priv->vbt.edp.bpp) {
|
|
/*
|
|
* This is a big fat ugly hack.
|
|
*
|
|
* Some machines in UEFI boot mode provide us a VBT that has 18
|
|
* bpp and 1.62 GHz link bandwidth for eDP, which for reasons
|
|
* unknown we fail to light up. Yet the same BIOS boots up with
|
|
* 24 bpp and 2.7 GHz link. Use the same bpp as the BIOS uses as
|
|
* max, not what it tells us to use.
|
|
*
|
|
* Note: This will still be broken if the eDP panel is not lit
|
|
* up by the BIOS, and thus we can't get the mode at module
|
|
* load.
|
|
*/
|
|
DRM_DEBUG_KMS("pipe has %d bpp for eDP panel, overriding BIOS-provided max %d bpp\n",
|
|
pipe_config->pipe_bpp, dev_priv->vbt.edp.bpp);
|
|
dev_priv->vbt.edp.bpp = pipe_config->pipe_bpp;
|
|
}
|
|
|
|
intel_ddi_clock_get(encoder, pipe_config);
|
|
|
|
if (IS_GEN9_LP(dev_priv))
|
|
pipe_config->lane_lat_optim_mask =
|
|
bxt_ddi_phy_get_lane_lat_optim_mask(encoder);
|
|
|
|
intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
|
|
}
|
|
|
|
static enum intel_output_type
|
|
intel_ddi_compute_output_type(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *crtc_state,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
switch (conn_state->connector->connector_type) {
|
|
case DRM_MODE_CONNECTOR_HDMIA:
|
|
return INTEL_OUTPUT_HDMI;
|
|
case DRM_MODE_CONNECTOR_eDP:
|
|
return INTEL_OUTPUT_EDP;
|
|
case DRM_MODE_CONNECTOR_DisplayPort:
|
|
return INTEL_OUTPUT_DP;
|
|
default:
|
|
MISSING_CASE(conn_state->connector->connector_type);
|
|
return INTEL_OUTPUT_UNUSED;
|
|
}
|
|
}
|
|
|
|
static bool intel_ddi_compute_config(struct intel_encoder *encoder,
|
|
struct intel_crtc_state *pipe_config,
|
|
struct drm_connector_state *conn_state)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
enum port port = encoder->port;
|
|
int ret;
|
|
|
|
if (port == PORT_A)
|
|
pipe_config->cpu_transcoder = TRANSCODER_EDP;
|
|
|
|
if (intel_crtc_has_type(pipe_config, INTEL_OUTPUT_HDMI))
|
|
ret = intel_hdmi_compute_config(encoder, pipe_config, conn_state);
|
|
else
|
|
ret = intel_dp_compute_config(encoder, pipe_config, conn_state);
|
|
|
|
if (IS_GEN9_LP(dev_priv) && ret)
|
|
pipe_config->lane_lat_optim_mask =
|
|
bxt_ddi_phy_calc_lane_lat_optim_mask(pipe_config->lane_count);
|
|
|
|
intel_ddi_compute_min_voltage_level(dev_priv, pipe_config);
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
static const struct drm_encoder_funcs intel_ddi_funcs = {
|
|
.reset = intel_dp_encoder_reset,
|
|
.destroy = intel_dp_encoder_destroy,
|
|
};
|
|
|
|
static struct intel_connector *
|
|
intel_ddi_init_dp_connector(struct intel_digital_port *intel_dig_port)
|
|
{
|
|
struct intel_connector *connector;
|
|
enum port port = intel_dig_port->base.port;
|
|
|
|
connector = intel_connector_alloc();
|
|
if (!connector)
|
|
return NULL;
|
|
|
|
intel_dig_port->dp.output_reg = DDI_BUF_CTL(port);
|
|
if (!intel_dp_init_connector(intel_dig_port, connector)) {
|
|
kfree(connector);
|
|
return NULL;
|
|
}
|
|
|
|
return connector;
|
|
}
|
|
|
|
static int modeset_pipe(struct drm_crtc *crtc,
|
|
struct drm_modeset_acquire_ctx *ctx)
|
|
{
|
|
struct drm_atomic_state *state;
|
|
struct drm_crtc_state *crtc_state;
|
|
int ret;
|
|
|
|
state = drm_atomic_state_alloc(crtc->dev);
|
|
if (!state)
|
|
return -ENOMEM;
|
|
|
|
state->acquire_ctx = ctx;
|
|
|
|
crtc_state = drm_atomic_get_crtc_state(state, crtc);
|
|
if (IS_ERR(crtc_state)) {
|
|
ret = PTR_ERR(crtc_state);
|
|
goto out;
|
|
}
|
|
|
|
crtc_state->mode_changed = true;
|
|
|
|
ret = drm_atomic_add_affected_connectors(state, crtc);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = drm_atomic_add_affected_planes(state, crtc);
|
|
if (ret)
|
|
goto out;
|
|
|
|
ret = drm_atomic_commit(state);
|
|
if (ret)
|
|
goto out;
|
|
|
|
return 0;
|
|
|
|
out:
|
|
drm_atomic_state_put(state);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int intel_hdmi_reset_link(struct intel_encoder *encoder,
|
|
struct drm_modeset_acquire_ctx *ctx)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(encoder->base.dev);
|
|
struct intel_hdmi *hdmi = enc_to_intel_hdmi(&encoder->base);
|
|
struct intel_connector *connector = hdmi->attached_connector;
|
|
struct i2c_adapter *adapter =
|
|
intel_gmbus_get_adapter(dev_priv, hdmi->ddc_bus);
|
|
struct drm_connector_state *conn_state;
|
|
struct intel_crtc_state *crtc_state;
|
|
struct intel_crtc *crtc;
|
|
u8 config;
|
|
int ret;
|
|
|
|
if (!connector || connector->base.status != connector_status_connected)
|
|
return 0;
|
|
|
|
ret = drm_modeset_lock(&dev_priv->drm.mode_config.connection_mutex,
|
|
ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
conn_state = connector->base.state;
|
|
|
|
crtc = to_intel_crtc(conn_state->crtc);
|
|
if (!crtc)
|
|
return 0;
|
|
|
|
ret = drm_modeset_lock(&crtc->base.mutex, ctx);
|
|
if (ret)
|
|
return ret;
|
|
|
|
crtc_state = to_intel_crtc_state(crtc->base.state);
|
|
|
|
WARN_ON(!intel_crtc_has_type(crtc_state, INTEL_OUTPUT_HDMI));
|
|
|
|
if (!crtc_state->base.active)
|
|
return 0;
|
|
|
|
if (!crtc_state->hdmi_high_tmds_clock_ratio &&
|
|
!crtc_state->hdmi_scrambling)
|
|
return 0;
|
|
|
|
if (conn_state->commit &&
|
|
!try_wait_for_completion(&conn_state->commit->hw_done))
|
|
return 0;
|
|
|
|
ret = drm_scdc_readb(adapter, SCDC_TMDS_CONFIG, &config);
|
|
if (ret < 0) {
|
|
DRM_ERROR("Failed to read TMDS config: %d\n", ret);
|
|
return 0;
|
|
}
|
|
|
|
if (!!(config & SCDC_TMDS_BIT_CLOCK_RATIO_BY_40) ==
|
|
crtc_state->hdmi_high_tmds_clock_ratio &&
|
|
!!(config & SCDC_SCRAMBLING_ENABLE) ==
|
|
crtc_state->hdmi_scrambling)
|
|
return 0;
|
|
|
|
/*
|
|
* HDMI 2.0 says that one should not send scrambled data
|
|
* prior to configuring the sink scrambling, and that
|
|
* TMDS clock/data transmission should be suspended when
|
|
* changing the TMDS clock rate in the sink. So let's
|
|
* just do a full modeset here, even though some sinks
|
|
* would be perfectly happy if were to just reconfigure
|
|
* the SCDC settings on the fly.
|
|
*/
|
|
return modeset_pipe(&crtc->base, ctx);
|
|
}
|
|
|
|
static bool intel_ddi_hotplug(struct intel_encoder *encoder,
|
|
struct intel_connector *connector)
|
|
{
|
|
struct drm_modeset_acquire_ctx ctx;
|
|
bool changed;
|
|
int ret;
|
|
|
|
changed = intel_encoder_hotplug(encoder, connector);
|
|
|
|
drm_modeset_acquire_init(&ctx, 0);
|
|
|
|
for (;;) {
|
|
if (connector->base.connector_type == DRM_MODE_CONNECTOR_HDMIA)
|
|
ret = intel_hdmi_reset_link(encoder, &ctx);
|
|
else
|
|
ret = intel_dp_retrain_link(encoder, &ctx);
|
|
|
|
if (ret == -EDEADLK) {
|
|
drm_modeset_backoff(&ctx);
|
|
continue;
|
|
}
|
|
|
|
break;
|
|
}
|
|
|
|
drm_modeset_drop_locks(&ctx);
|
|
drm_modeset_acquire_fini(&ctx);
|
|
WARN(ret, "Acquiring modeset locks failed with %i\n", ret);
|
|
|
|
return changed;
|
|
}
|
|
|
|
static struct intel_connector *
|
|
intel_ddi_init_hdmi_connector(struct intel_digital_port *intel_dig_port)
|
|
{
|
|
struct intel_connector *connector;
|
|
enum port port = intel_dig_port->base.port;
|
|
|
|
connector = intel_connector_alloc();
|
|
if (!connector)
|
|
return NULL;
|
|
|
|
intel_dig_port->hdmi.hdmi_reg = DDI_BUF_CTL(port);
|
|
intel_hdmi_init_connector(intel_dig_port, connector);
|
|
|
|
return connector;
|
|
}
|
|
|
|
static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dport)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(dport->base.base.dev);
|
|
|
|
if (dport->base.port != PORT_A)
|
|
return false;
|
|
|
|
if (dport->saved_port_bits & DDI_A_4_LANES)
|
|
return false;
|
|
|
|
/* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only
|
|
* supported configuration
|
|
*/
|
|
if (IS_GEN9_LP(dev_priv))
|
|
return true;
|
|
|
|
/* Cannonlake: Most of SKUs don't support DDI_E, and the only
|
|
* one who does also have a full A/E split called
|
|
* DDI_F what makes DDI_E useless. However for this
|
|
* case let's trust VBT info.
|
|
*/
|
|
if (IS_CANNONLAKE(dev_priv) &&
|
|
!intel_bios_is_port_present(dev_priv, PORT_E))
|
|
return true;
|
|
|
|
return false;
|
|
}
|
|
|
|
static int
|
|
intel_ddi_max_lanes(struct intel_digital_port *intel_dport)
|
|
{
|
|
struct drm_i915_private *dev_priv = to_i915(intel_dport->base.base.dev);
|
|
enum port port = intel_dport->base.port;
|
|
int max_lanes = 4;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11)
|
|
return max_lanes;
|
|
|
|
if (port == PORT_A || port == PORT_E) {
|
|
if (I915_READ(DDI_BUF_CTL(PORT_A)) & DDI_A_4_LANES)
|
|
max_lanes = port == PORT_A ? 4 : 0;
|
|
else
|
|
/* Both A and E share 2 lanes */
|
|
max_lanes = 2;
|
|
}
|
|
|
|
/*
|
|
* Some BIOS might fail to set this bit on port A if eDP
|
|
* wasn't lit up at boot. Force this bit set when needed
|
|
* so we use the proper lane count for our calculations.
|
|
*/
|
|
if (intel_ddi_a_force_4_lanes(intel_dport)) {
|
|
DRM_DEBUG_KMS("Forcing DDI_A_4_LANES for port A\n");
|
|
intel_dport->saved_port_bits |= DDI_A_4_LANES;
|
|
max_lanes = 4;
|
|
}
|
|
|
|
return max_lanes;
|
|
}
|
|
|
|
void intel_ddi_init(struct drm_i915_private *dev_priv, enum port port)
|
|
{
|
|
struct intel_digital_port *intel_dig_port;
|
|
struct intel_encoder *intel_encoder;
|
|
struct drm_encoder *encoder;
|
|
bool init_hdmi, init_dp, init_lspcon = false;
|
|
|
|
|
|
init_hdmi = (dev_priv->vbt.ddi_port_info[port].supports_dvi ||
|
|
dev_priv->vbt.ddi_port_info[port].supports_hdmi);
|
|
init_dp = dev_priv->vbt.ddi_port_info[port].supports_dp;
|
|
|
|
if (intel_bios_is_lspcon_present(dev_priv, port)) {
|
|
/*
|
|
* Lspcon device needs to be driven with DP connector
|
|
* with special detection sequence. So make sure DP
|
|
* is initialized before lspcon.
|
|
*/
|
|
init_dp = true;
|
|
init_lspcon = true;
|
|
init_hdmi = false;
|
|
DRM_DEBUG_KMS("VBT says port %c has lspcon\n", port_name(port));
|
|
}
|
|
|
|
if (!init_dp && !init_hdmi) {
|
|
DRM_DEBUG_KMS("VBT says port %c is not DVI/HDMI/DP compatible, respect it\n",
|
|
port_name(port));
|
|
return;
|
|
}
|
|
|
|
intel_dig_port = kzalloc(sizeof(*intel_dig_port), GFP_KERNEL);
|
|
if (!intel_dig_port)
|
|
return;
|
|
|
|
intel_encoder = &intel_dig_port->base;
|
|
encoder = &intel_encoder->base;
|
|
|
|
drm_encoder_init(&dev_priv->drm, encoder, &intel_ddi_funcs,
|
|
DRM_MODE_ENCODER_TMDS, "DDI %c", port_name(port));
|
|
|
|
intel_encoder->hotplug = intel_ddi_hotplug;
|
|
intel_encoder->compute_output_type = intel_ddi_compute_output_type;
|
|
intel_encoder->compute_config = intel_ddi_compute_config;
|
|
intel_encoder->enable = intel_enable_ddi;
|
|
if (IS_GEN9_LP(dev_priv))
|
|
intel_encoder->pre_pll_enable = bxt_ddi_pre_pll_enable;
|
|
intel_encoder->pre_enable = intel_ddi_pre_enable;
|
|
intel_encoder->disable = intel_disable_ddi;
|
|
intel_encoder->post_disable = intel_ddi_post_disable;
|
|
intel_encoder->get_hw_state = intel_ddi_get_hw_state;
|
|
intel_encoder->get_config = intel_ddi_get_config;
|
|
intel_encoder->suspend = intel_dp_encoder_suspend;
|
|
intel_encoder->get_power_domains = intel_ddi_get_power_domains;
|
|
intel_encoder->type = INTEL_OUTPUT_DDI;
|
|
intel_encoder->power_domain = intel_port_to_power_domain(port);
|
|
intel_encoder->port = port;
|
|
intel_encoder->crtc_mask = (1 << 0) | (1 << 1) | (1 << 2);
|
|
intel_encoder->cloneable = 0;
|
|
|
|
if (INTEL_GEN(dev_priv) >= 11)
|
|
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
|
|
DDI_BUF_PORT_REVERSAL;
|
|
else
|
|
intel_dig_port->saved_port_bits = I915_READ(DDI_BUF_CTL(port)) &
|
|
(DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
|
|
intel_dig_port->dp.output_reg = INVALID_MMIO_REG;
|
|
intel_dig_port->max_lanes = intel_ddi_max_lanes(intel_dig_port);
|
|
|
|
switch (port) {
|
|
case PORT_A:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_A_IO;
|
|
break;
|
|
case PORT_B:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_B_IO;
|
|
break;
|
|
case PORT_C:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_C_IO;
|
|
break;
|
|
case PORT_D:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_D_IO;
|
|
break;
|
|
case PORT_E:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_E_IO;
|
|
break;
|
|
case PORT_F:
|
|
intel_dig_port->ddi_io_power_domain =
|
|
POWER_DOMAIN_PORT_DDI_F_IO;
|
|
break;
|
|
default:
|
|
MISSING_CASE(port);
|
|
}
|
|
|
|
intel_infoframe_init(intel_dig_port);
|
|
|
|
if (init_dp) {
|
|
if (!intel_ddi_init_dp_connector(intel_dig_port))
|
|
goto err;
|
|
|
|
intel_dig_port->hpd_pulse = intel_dp_hpd_pulse;
|
|
}
|
|
|
|
/* In theory we don't need the encoder->type check, but leave it just in
|
|
* case we have some really bad VBTs... */
|
|
if (intel_encoder->type != INTEL_OUTPUT_EDP && init_hdmi) {
|
|
if (!intel_ddi_init_hdmi_connector(intel_dig_port))
|
|
goto err;
|
|
}
|
|
|
|
if (init_lspcon) {
|
|
if (lspcon_init(intel_dig_port))
|
|
/* TODO: handle hdmi info frame part */
|
|
DRM_DEBUG_KMS("LSPCON init success on port %c\n",
|
|
port_name(port));
|
|
else
|
|
/*
|
|
* LSPCON init faied, but DP init was success, so
|
|
* lets try to drive as DP++ port.
|
|
*/
|
|
DRM_ERROR("LSPCON init failed on port %c\n",
|
|
port_name(port));
|
|
}
|
|
|
|
return;
|
|
|
|
err:
|
|
drm_encoder_cleanup(encoder);
|
|
kfree(intel_dig_port);
|
|
}
|