Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-18 10:01:43 +00:00
Code Issues Packages Projects Releases Wiki Activity
5d8f681f3d
linux/drivers/usb/host/ohci-q.c
Alan Stern a8693424c7 USB: OHCI: accept very late isochronous URBs 
Commit 24f531371d (USB: EHCI: accept very late isochronous URBs)
changed the isochronous API provided by ehci-hcd.  URBs submitted too
late, so that the time slots for all their packets have already
expired, are no longer rejected outright.  Instead the submission is
accepted, and the URB completes normally with a -EXDEV error for each
packet.  This is what client drivers expect.

This patch implements the same policy in ohci-hcd.  The change is more
complicated than it was in ehci-hcd, because ohci-hcd doesn't scan for
isochronous completions in the same way as ehci-hcd does.  Rather, it
depends on the hardware adding completed TDs to a "done queue".  Some
OHCI controller don't handle this properly when a TD's time slot has
already expired, so we have to avoid adding such TDs to the schedule
in the first place.  As a result, if the URB was submitted too late
then none of its TDs will get put on the schedule, so none of them
will end up on the done queue, so the driver will never realize that
the URB should be completed.

To solve this problem, the patch adds one to urb_priv->td_cnt for such
URBs, making it larger than urb_priv->length (td_cnt already gets set
to the number of TD's that had to be skipped because their slots have
expired).  Each time an URB is given back, the finish_urb() routine
looks to see if urb_priv->td_cnt for the next URB on the same endpoint
is marked in this way.  If so, it gives back the next URB right away.

This should be applied to all kernels containing commit 815fa7b917
(USB: OHCI: fix logic for scheduling isochronous URBs).

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
CC: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-25 17:05:35 -07:00

1175 lines
33 KiB
C
Raw Blame History

/*
* OHCI HCD (Host Controller Driver) for USB.
*
* (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
* (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
*
* This file is licenced under the GPL.
*/
#include <linux/irq.h>
#include <linux/slab.h>
static void urb_free_priv (struct ohci_hcd *hc, urb_priv_t *urb_priv)
{
int last = urb_priv->length - 1;
if (last >= 0) {
int i;
struct td *td;
for (i = 0; i <= last; i++) {
td = urb_priv->td [i];
if (td)
td_free (hc, td);
}
}
list_del (&urb_priv->pending);
kfree (urb_priv);
}
/*-------------------------------------------------------------------------*/
/*
* URB goes back to driver, and isn't reissued.
* It's completely gone from HC data structures.
* PRECONDITION: ohci lock held, irqs blocked.
*/
static void
finish_urb(struct ohci_hcd *ohci, struct urb *urb, int status)
__releases(ohci->lock)
__acquires(ohci->lock)
{
struct device *dev = ohci_to_hcd(ohci)->self.controller;
struct usb_host_endpoint *ep = urb->ep;
struct urb_priv *urb_priv;
// ASSERT (urb->hcpriv != 0);
restart:
urb_free_priv (ohci, urb->hcpriv);
urb->hcpriv = NULL;
if (likely(status == -EINPROGRESS))
status = 0;
switch (usb_pipetype (urb->pipe)) {
case PIPE_ISOCHRONOUS:
ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs--;
if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
if (quirk_amdiso(ohci))
usb_amd_quirk_pll_enable();
if (quirk_amdprefetch(ohci))
sb800_prefetch(dev, 0);
}
break;
case PIPE_INTERRUPT:
ohci_to_hcd(ohci)->self.bandwidth_int_reqs--;
break;
}
#ifdef OHCI_VERBOSE_DEBUG
urb_print(urb, "RET", usb_pipeout (urb->pipe), status);
#endif
/* urb->complete() can reenter this HCD */
usb_hcd_unlink_urb_from_ep(ohci_to_hcd(ohci), urb);
spin_unlock (&ohci->lock);
usb_hcd_giveback_urb(ohci_to_hcd(ohci), urb, status);
spin_lock (&ohci->lock);
/* stop periodic dma if it's not needed */
if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0
&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0) {
ohci->hc_control &= ~(OHCI_CTRL_PLE|OHCI_CTRL_IE);
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
}
/*
* An isochronous URB that is sumitted too late won't have any TDs
* (marked by the fact that the td_cnt value is larger than the
* actual number of TDs). If the next URB on this endpoint is like
* that, give it back now.
*/
if (!list_empty(&ep->urb_list)) {
urb = list_first_entry(&ep->urb_list, struct urb, urb_list);
urb_priv = urb->hcpriv;
if (urb_priv->td_cnt > urb_priv->length) {
status = 0;
goto restart;
}
}
}
/*-------------------------------------------------------------------------*
* ED handling functions
*-------------------------------------------------------------------------*/
/* search for the right schedule branch to use for a periodic ed.
* does some load balancing; returns the branch, or negative errno.
*/
static int balance (struct ohci_hcd *ohci, int interval, int load)
{
int i, branch = -ENOSPC;
/* iso periods can be huge; iso tds specify frame numbers */
if (interval > NUM_INTS)
interval = NUM_INTS;
/* search for the least loaded schedule branch of that period
* that has enough bandwidth left unreserved.
*/
for (i = 0; i < interval ; i++) {
if (branch < 0 || ohci->load [branch] > ohci->load [i]) {
int j;
/* usb 1.1 says 90% of one frame */
for (j = i; j < NUM_INTS; j += interval) {
if ((ohci->load [j] + load) > 900)
break;
}
if (j < NUM_INTS)
continue;
branch = i;
}
}
return branch;
}
/*-------------------------------------------------------------------------*/
/* both iso and interrupt requests have periods; this routine puts them
* into the schedule tree in the apppropriate place. most iso devices use
* 1msec periods, but that's not required.
*/
static void periodic_link (struct ohci_hcd *ohci, struct ed *ed)
{
unsigned i;
ohci_vdbg (ohci, "link %sed %p branch %d [%dus.], interval %d\n",
(ed->hwINFO & cpu_to_hc32 (ohci, ED_ISO)) ? "iso " : "",
ed, ed->branch, ed->load, ed->interval);
for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
struct ed **prev = &ohci->periodic [i];
__hc32 *prev_p = &ohci->hcca->int_table [i];
struct ed *here = *prev;
/* sorting each branch by period (slow before fast)
* lets us share the faster parts of the tree.
* (plus maybe: put interrupt eds before iso)
*/
while (here && ed != here) {
if (ed->interval > here->interval)
break;
prev = &here->ed_next;
prev_p = &here->hwNextED;
here = *prev;
}
if (ed != here) {
ed->ed_next = here;
if (here)
ed->hwNextED = *prev_p;
wmb ();
*prev = ed;
*prev_p = cpu_to_hc32(ohci, ed->dma);
wmb();
}
ohci->load [i] += ed->load;
}
ohci_to_hcd(ohci)->self.bandwidth_allocated += ed->load / ed->interval;
}
/* link an ed into one of the HC chains */
static int ed_schedule (struct ohci_hcd *ohci, struct ed *ed)
{
int branch;
ed->state = ED_OPER;
ed->ed_prev = NULL;
ed->ed_next = NULL;
ed->hwNextED = 0;
if (quirk_zfmicro(ohci)
&& (ed->type == PIPE_INTERRUPT)
&& !(ohci->eds_scheduled++))
mod_timer(&ohci->unlink_watchdog, round_jiffies(jiffies + HZ));
wmb ();
/* we care about rm_list when setting CLE/BLE in case the HC was at
* work on some TD when CLE/BLE was turned off, and isn't quiesced
* yet. finish_unlinks() restarts as needed, some upcoming INTR_SF.
*
* control and bulk EDs are doubly linked (ed_next, ed_prev), but
* periodic ones are singly linked (ed_next). that's because the
* periodic schedule encodes a tree like figure 3-5 in the ohci
* spec: each qh can have several "previous" nodes, and the tree
* doesn't have unused/idle descriptors.
*/
switch (ed->type) {
case PIPE_CONTROL:
if (ohci->ed_controltail == NULL) {
WARN_ON (ohci->hc_control & OHCI_CTRL_CLE);
ohci_writel (ohci, ed->dma,
&ohci->regs->ed_controlhead);
} else {
ohci->ed_controltail->ed_next = ed;
ohci->ed_controltail->hwNextED = cpu_to_hc32 (ohci,
ed->dma);
}
ed->ed_prev = ohci->ed_controltail;
if (!ohci->ed_controltail && !ohci->ed_rm_list) {
wmb();
ohci->hc_control |= OHCI_CTRL_CLE;
ohci_writel (ohci, 0, &ohci->regs->ed_controlcurrent);
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
}
ohci->ed_controltail = ed;
break;
case PIPE_BULK:
if (ohci->ed_bulktail == NULL) {
WARN_ON (ohci->hc_control & OHCI_CTRL_BLE);
ohci_writel (ohci, ed->dma, &ohci->regs->ed_bulkhead);
} else {
ohci->ed_bulktail->ed_next = ed;
ohci->ed_bulktail->hwNextED = cpu_to_hc32 (ohci,
ed->dma);
}
ed->ed_prev = ohci->ed_bulktail;
if (!ohci->ed_bulktail && !ohci->ed_rm_list) {
wmb();
ohci->hc_control |= OHCI_CTRL_BLE;
ohci_writel (ohci, 0, &ohci->regs->ed_bulkcurrent);
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
}
ohci->ed_bulktail = ed;
break;
// case PIPE_INTERRUPT:
// case PIPE_ISOCHRONOUS:
default:
branch = balance (ohci, ed->interval, ed->load);
if (branch < 0) {
ohci_dbg (ohci,
"ERR %d, interval %d msecs, load %d\n",
branch, ed->interval, ed->load);
// FIXME if there are TDs queued, fail them!
return branch;
}
ed->branch = branch;
periodic_link (ohci, ed);
}
/* the HC may not see the schedule updates yet, but if it does
* then they'll be properly ordered.
*/
return 0;
}
/*-------------------------------------------------------------------------*/
/* scan the periodic table to find and unlink this ED */
static void periodic_unlink (struct ohci_hcd *ohci, struct ed *ed)
{
int i;
for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
struct ed *temp;
struct ed **prev = &ohci->periodic [i];
__hc32 *prev_p = &ohci->hcca->int_table [i];
while (*prev && (temp = *prev) != ed) {
prev_p = &temp->hwNextED;
prev = &temp->ed_next;
}
if (*prev) {
*prev_p = ed->hwNextED;
*prev = ed->ed_next;
}
ohci->load [i] -= ed->load;
}
ohci_to_hcd(ohci)->self.bandwidth_allocated -= ed->load / ed->interval;
ohci_vdbg (ohci, "unlink %sed %p branch %d [%dus.], interval %d\n",
(ed->hwINFO & cpu_to_hc32 (ohci, ED_ISO)) ? "iso " : "",
ed, ed->branch, ed->load, ed->interval);
}
/* unlink an ed from one of the HC chains.
* just the link to the ed is unlinked.
* the link from the ed still points to another operational ed or 0
* so the HC can eventually finish the processing of the unlinked ed
* (assuming it already started that, which needn't be true).
*
* ED_UNLINK is a transient state: the HC may still see this ED, but soon
* it won't. ED_SKIP means the HC will finish its current transaction,
* but won't start anything new. The TD queue may still grow; device
* drivers don't know about this HCD-internal state.
*
* When the HC can't see the ED, something changes ED_UNLINK to one of:
*
* - ED_OPER: when there's any request queued, the ED gets rescheduled
* immediately. HC should be working on them.
*
* - ED_IDLE: when there's no TD queue. there's no reason for the HC
* to care about this ED; safe to disable the endpoint.
*
* When finish_unlinks() runs later, after SOF interrupt, it will often
* complete one or more URB unlinks before making that state change.
*/
static void ed_deschedule (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
ed->state = ED_UNLINK;
/* To deschedule something from the control or bulk list, just
* clear CLE/BLE and wait. There's no safe way to scrub out list
* head/current registers until later, and "later" isn't very
* tightly specified. Figure 6-5 and Section 6.4.2.2 show how
* the HC is reading the ED queues (while we modify them).
*
* For now, ed_schedule() is "later". It might be good paranoia
* to scrub those registers in finish_unlinks(), in case of bugs
* that make the HC try to use them.
*/
switch (ed->type) {
case PIPE_CONTROL:
/* remove ED from the HC's list: */
if (ed->ed_prev == NULL) {
if (!ed->hwNextED) {
ohci->hc_control &= ~OHCI_CTRL_CLE;
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
// a ohci_readl() later syncs CLE with the HC
} else
ohci_writel (ohci,
hc32_to_cpup (ohci, &ed->hwNextED),
&ohci->regs->ed_controlhead);
} else {
ed->ed_prev->ed_next = ed->ed_next;
ed->ed_prev->hwNextED = ed->hwNextED;
}
/* remove ED from the HCD's list: */
if (ohci->ed_controltail == ed) {
ohci->ed_controltail = ed->ed_prev;
if (ohci->ed_controltail)
ohci->ed_controltail->ed_next = NULL;
} else if (ed->ed_next) {
ed->ed_next->ed_prev = ed->ed_prev;
}
break;
case PIPE_BULK:
/* remove ED from the HC's list: */
if (ed->ed_prev == NULL) {
if (!ed->hwNextED) {
ohci->hc_control &= ~OHCI_CTRL_BLE;
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
// a ohci_readl() later syncs BLE with the HC
} else
ohci_writel (ohci,
hc32_to_cpup (ohci, &ed->hwNextED),
&ohci->regs->ed_bulkhead);
} else {
ed->ed_prev->ed_next = ed->ed_next;
ed->ed_prev->hwNextED = ed->hwNextED;
}
/* remove ED from the HCD's list: */
if (ohci->ed_bulktail == ed) {
ohci->ed_bulktail = ed->ed_prev;
if (ohci->ed_bulktail)
ohci->ed_bulktail->ed_next = NULL;
} else if (ed->ed_next) {
ed->ed_next->ed_prev = ed->ed_prev;
}
break;
// case PIPE_INTERRUPT:
// case PIPE_ISOCHRONOUS:
default:
periodic_unlink (ohci, ed);
break;
}
}
/*-------------------------------------------------------------------------*/
/* get and maybe (re)init an endpoint. init _should_ be done only as part
* of enumeration, usb_set_configuration() or usb_set_interface().
*/
static struct ed *ed_get (
struct ohci_hcd *ohci,
struct usb_host_endpoint *ep,
struct usb_device *udev,
unsigned int pipe,
int interval
) {
struct ed *ed;
unsigned long flags;
spin_lock_irqsave (&ohci->lock, flags);
if (!(ed = ep->hcpriv)) {
struct td *td;
int is_out;
u32 info;
ed = ed_alloc (ohci, GFP_ATOMIC);
if (!ed) {
/* out of memory */
goto done;
}
/* dummy td; end of td list for ed */
td = td_alloc (ohci, GFP_ATOMIC);
if (!td) {
/* out of memory */
ed_free (ohci, ed);
ed = NULL;
goto done;
}
ed->dummy = td;
ed->hwTailP = cpu_to_hc32 (ohci, td->td_dma);
ed->hwHeadP = ed->hwTailP; /* ED_C, ED_H zeroed */
ed->state = ED_IDLE;
is_out = !(ep->desc.bEndpointAddress & USB_DIR_IN);
/* FIXME usbcore changes dev->devnum before SET_ADDRESS
* succeeds ... otherwise we wouldn't need "pipe".
*/
info = usb_pipedevice (pipe);
ed->type = usb_pipetype(pipe);
info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << 7;
info |= usb_endpoint_maxp(&ep->desc) << 16;
if (udev->speed == USB_SPEED_LOW)
info |= ED_LOWSPEED;
/* only control transfers store pids in tds */
if (ed->type != PIPE_CONTROL) {
info |= is_out ? ED_OUT : ED_IN;
if (ed->type != PIPE_BULK) {
/* periodic transfers... */
if (ed->type == PIPE_ISOCHRONOUS)
info |= ED_ISO;
else if (interval > 32) /* iso can be bigger */
interval = 32;
ed->interval = interval;
ed->load = usb_calc_bus_time (
udev->speed, !is_out,
ed->type == PIPE_ISOCHRONOUS,
usb_endpoint_maxp(&ep->desc))
/ 1000;
}
}
ed->hwINFO = cpu_to_hc32(ohci, info);
ep->hcpriv = ed;
}
done:
spin_unlock_irqrestore (&ohci->lock, flags);
return ed;
}
/*-------------------------------------------------------------------------*/
/* request unlinking of an endpoint from an operational HC.
* put the ep on the rm_list
* real work is done at the next start frame (SF) hardware interrupt
* caller guarantees HCD is running, so hardware access is safe,
* and that ed->state is ED_OPER
*/
static void start_ed_unlink (struct ohci_hcd *ohci, struct ed *ed)
{
ed->hwINFO |= cpu_to_hc32 (ohci, ED_DEQUEUE);
ed_deschedule (ohci, ed);
/* rm_list is just singly linked, for simplicity */
ed->ed_next = ohci->ed_rm_list;
ed->ed_prev = NULL;
ohci->ed_rm_list = ed;
/* enable SOF interrupt */
ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrstatus);
ohci_writel (ohci, OHCI_INTR_SF, &ohci->regs->intrenable);
// flush those writes, and get latest HCCA contents
(void) ohci_readl (ohci, &ohci->regs->control);
/* SF interrupt might get delayed; record the frame counter value that
* indicates when the HC isn't looking at it, so concurrent unlinks
* behave. frame_no wraps every 2^16 msec, and changes right before
* SF is triggered.
*/
ed->tick = ohci_frame_no(ohci) + 1;
}
/*-------------------------------------------------------------------------*
* TD handling functions
*-------------------------------------------------------------------------*/
/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
static void
td_fill (struct ohci_hcd *ohci, u32 info,
dma_addr_t data, int len,
struct urb *urb, int index)
{
struct td *td, *td_pt;
struct urb_priv *urb_priv = urb->hcpriv;
int is_iso = info & TD_ISO;
int hash;
// ASSERT (index < urb_priv->length);
/* aim for only one interrupt per urb. mostly applies to control
* and iso; other urbs rarely need more than one TD per urb.
* this way, only final tds (or ones with an error) cause IRQs.
* at least immediately; use DI=6 in case any control request is
* tempted to die part way through. (and to force the hc to flush
* its donelist soonish, even on unlink paths.)
*
* NOTE: could delay interrupts even for the last TD, and get fewer
* interrupts ... increasing per-urb latency by sharing interrupts.
* Drivers that queue bulk urbs may request that behavior.
*/
if (index != (urb_priv->length - 1)
|| (urb->transfer_flags & URB_NO_INTERRUPT))
info |= TD_DI_SET (6);
/* use this td as the next dummy */
td_pt = urb_priv->td [index];
/* fill the old dummy TD */
td = urb_priv->td [index] = urb_priv->ed->dummy;
urb_priv->ed->dummy = td_pt;
td->ed = urb_priv->ed;
td->next_dl_td = NULL;
td->index = index;
td->urb = urb;
td->data_dma = data;
if (!len)
data = 0;
td->hwINFO = cpu_to_hc32 (ohci, info);
if (is_iso) {
td->hwCBP = cpu_to_hc32 (ohci, data & 0xFFFFF000);
*ohci_hwPSWp(ohci, td, 0) = cpu_to_hc16 (ohci,
(data & 0x0FFF) | 0xE000);
} else {
td->hwCBP = cpu_to_hc32 (ohci, data);
}
if (data)
td->hwBE = cpu_to_hc32 (ohci, data + len - 1);
else
td->hwBE = 0;
td->hwNextTD = cpu_to_hc32 (ohci, td_pt->td_dma);
/* append to queue */
list_add_tail (&td->td_list, &td->ed->td_list);
/* hash it for later reverse mapping */
hash = TD_HASH_FUNC (td->td_dma);
td->td_hash = ohci->td_hash [hash];
ohci->td_hash [hash] = td;
/* HC might read the TD (or cachelines) right away ... */
wmb ();
td->ed->hwTailP = td->hwNextTD;
}
/*-------------------------------------------------------------------------*/
/* Prepare all TDs of a transfer, and queue them onto the ED.
* Caller guarantees HC is active.
* Usually the ED is already on the schedule, so TDs might be
* processed as soon as they're queued.
*/
static void td_submit_urb (
struct ohci_hcd *ohci,
struct urb *urb
) {
struct urb_priv *urb_priv = urb->hcpriv;
struct device *dev = ohci_to_hcd(ohci)->self.controller;
dma_addr_t data;
int data_len = urb->transfer_buffer_length;
int cnt = 0;
u32 info = 0;
int is_out = usb_pipeout (urb->pipe);
int periodic = 0;
/* OHCI handles the bulk/interrupt data toggles itself. We just
* use the device toggle bits for resetting, and rely on the fact
* that resetting toggle is meaningless if the endpoint is active.
*/
if (!usb_gettoggle (urb->dev, usb_pipeendpoint (urb->pipe), is_out)) {
usb_settoggle (urb->dev, usb_pipeendpoint (urb->pipe),
is_out, 1);
urb_priv->ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_C);
}
list_add (&urb_priv->pending, &ohci->pending);
if (data_len)
data = urb->transfer_dma;
else
data = 0;
/* NOTE: TD_CC is set so we can tell which TDs the HC processed by
* using TD_CC_GET, as well as by seeing them on the done list.
* (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
*/
switch (urb_priv->ed->type) {
/* Bulk and interrupt are identical except for where in the schedule
* their EDs live.
*/
case PIPE_INTERRUPT:
/* ... and periodic urbs have extra accounting */
periodic = ohci_to_hcd(ohci)->self.bandwidth_int_reqs++ == 0
&& ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0;
/* FALLTHROUGH */
case PIPE_BULK:
info = is_out
? TD_T_TOGGLE | TD_CC | TD_DP_OUT
: TD_T_TOGGLE | TD_CC | TD_DP_IN;
/* TDs _could_ transfer up to 8K each */
while (data_len > 4096) {
td_fill (ohci, info, data, 4096, urb, cnt);
data += 4096;
data_len -= 4096;
cnt++;
}
/* maybe avoid ED halt on final TD short read */
if (!(urb->transfer_flags & URB_SHORT_NOT_OK))
info |= TD_R;
td_fill (ohci, info, data, data_len, urb, cnt);
cnt++;
if ((urb->transfer_flags & URB_ZERO_PACKET)
&& cnt < urb_priv->length) {
td_fill (ohci, info, 0, 0, urb, cnt);
cnt++;
}
/* maybe kickstart bulk list */
if (urb_priv->ed->type == PIPE_BULK) {
wmb ();
ohci_writel (ohci, OHCI_BLF, &ohci->regs->cmdstatus);
}
break;
/* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
* any DATA phase works normally, and the STATUS ack is special.
*/
case PIPE_CONTROL:
info = TD_CC | TD_DP_SETUP | TD_T_DATA0;
td_fill (ohci, info, urb->setup_dma, 8, urb, cnt++);
if (data_len > 0) {
info = TD_CC | TD_R | TD_T_DATA1;
info |= is_out ? TD_DP_OUT : TD_DP_IN;
/* NOTE: mishandles transfers >8K, some >4K */
td_fill (ohci, info, data, data_len, urb, cnt++);
}
info = (is_out || data_len == 0)
? TD_CC | TD_DP_IN | TD_T_DATA1
: TD_CC | TD_DP_OUT | TD_T_DATA1;
td_fill (ohci, info, data, 0, urb, cnt++);
/* maybe kickstart control list */
wmb ();
ohci_writel (ohci, OHCI_CLF, &ohci->regs->cmdstatus);
break;
/* ISO has no retransmit, so no toggle; and it uses special TDs.
* Each TD could handle multiple consecutive frames (interval 1);
* we could often reduce the number of TDs here.
*/
case PIPE_ISOCHRONOUS:
for (cnt = urb_priv->td_cnt; cnt < urb->number_of_packets;
cnt++) {
int frame = urb->start_frame;
// FIXME scheduling should handle frame counter
// roll-around ... exotic case (and OHCI has
// a 2^16 iso range, vs other HCs max of 2^10)
frame += cnt * urb->interval;
frame &= 0xffff;
td_fill (ohci, TD_CC | TD_ISO | frame,
data + urb->iso_frame_desc [cnt].offset,
urb->iso_frame_desc [cnt].length, urb, cnt);
}
if (ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs == 0) {
if (quirk_amdiso(ohci))
usb_amd_quirk_pll_disable();
if (quirk_amdprefetch(ohci))
sb800_prefetch(dev, 1);
}
periodic = ohci_to_hcd(ohci)->self.bandwidth_isoc_reqs++ == 0
&& ohci_to_hcd(ohci)->self.bandwidth_int_reqs == 0;
break;
}
/* start periodic dma if needed */
if (periodic) {
wmb ();
ohci->hc_control |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
ohci_writel (ohci, ohci->hc_control, &ohci->regs->control);
}
// ASSERT (urb_priv->length == cnt);
}
/*-------------------------------------------------------------------------*
* Done List handling functions
*-------------------------------------------------------------------------*/
/* calculate transfer length/status and update the urb */
static int td_done(struct ohci_hcd *ohci, struct urb *urb, struct td *td)
{
u32 tdINFO = hc32_to_cpup (ohci, &td->hwINFO);
int cc = 0;
int status = -EINPROGRESS;
list_del (&td->td_list);
/* ISO ... drivers see per-TD length/status */
if (tdINFO & TD_ISO) {
u16 tdPSW = ohci_hwPSW(ohci, td, 0);
int dlen = 0;
/* NOTE: assumes FC in tdINFO == 0, and that
* only the first of 0..MAXPSW psws is used.
*/
cc = (tdPSW >> 12) & 0xF;
if (tdINFO & TD_CC) /* hc didn't touch? */
return status;
if (usb_pipeout (urb->pipe))
dlen = urb->iso_frame_desc [td->index].length;
else {
/* short reads are always OK for ISO */
if (cc == TD_DATAUNDERRUN)
cc = TD_CC_NOERROR;
dlen = tdPSW & 0x3ff;
}
urb->actual_length += dlen;
urb->iso_frame_desc [td->index].actual_length = dlen;
urb->iso_frame_desc [td->index].status = cc_to_error [cc];
if (cc != TD_CC_NOERROR)
ohci_vdbg (ohci,
"urb %p iso td %p (%d) len %d cc %d\n",
urb, td, 1 + td->index, dlen, cc);
/* BULK, INT, CONTROL ... drivers see aggregate length/status,
* except that "setup" bytes aren't counted and "short" transfers
* might not be reported as errors.
*/
} else {
int type = usb_pipetype (urb->pipe);
u32 tdBE = hc32_to_cpup (ohci, &td->hwBE);
cc = TD_CC_GET (tdINFO);
/* update packet status if needed (short is normally ok) */
if (cc == TD_DATAUNDERRUN
&& !(urb->transfer_flags & URB_SHORT_NOT_OK))
cc = TD_CC_NOERROR;
if (cc != TD_CC_NOERROR && cc < 0x0E)
status = cc_to_error[cc];
/* count all non-empty packets except control SETUP packet */
if ((type != PIPE_CONTROL || td->index != 0) && tdBE != 0) {
if (td->hwCBP == 0)
urb->actual_length += tdBE - td->data_dma + 1;
else
urb->actual_length +=
hc32_to_cpup (ohci, &td->hwCBP)
- td->data_dma;
}
if (cc != TD_CC_NOERROR && cc < 0x0E)
ohci_vdbg (ohci,
"urb %p td %p (%d) cc %d, len=%d/%d\n",
urb, td, 1 + td->index, cc,
urb->actual_length,
urb->transfer_buffer_length);
}
return status;
}
/*-------------------------------------------------------------------------*/
static void ed_halted(struct ohci_hcd *ohci, struct td *td, int cc)
{
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
struct list_head *tmp = td->td_list.next;
__hc32 toggle = ed->hwHeadP & cpu_to_hc32 (ohci, ED_C);
/* clear ed halt; this is the td that caused it, but keep it inactive
* until its urb->complete() has a chance to clean up.
*/
ed->hwINFO |= cpu_to_hc32 (ohci, ED_SKIP);
wmb ();
ed->hwHeadP &= ~cpu_to_hc32 (ohci, ED_H);
/* Get rid of all later tds from this urb. We don't have
* to be careful: no errors and nothing was transferred.
* Also patch the ed so it looks as if those tds completed normally.
*/
while (tmp != &ed->td_list) {
struct td *next;
next = list_entry (tmp, struct td, td_list);
tmp = next->td_list.next;
if (next->urb != urb)
break;
/* NOTE: if multi-td control DATA segments get supported,
* this urb had one of them, this td wasn't the last td
* in that segment (TD_R clear), this ed halted because
* of a short read, _and_ URB_SHORT_NOT_OK is clear ...
* then we need to leave the control STATUS packet queued
* and clear ED_SKIP.
*/
list_del(&next->td_list);
urb_priv->td_cnt++;
ed->hwHeadP = next->hwNextTD | toggle;
}
/* help for troubleshooting: report anything that
* looks odd ... that doesn't include protocol stalls
* (or maybe some other things)
*/
switch (cc) {
case TD_DATAUNDERRUN:
if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
break;
/* fallthrough */
case TD_CC_STALL:
if (usb_pipecontrol (urb->pipe))
break;
/* fallthrough */
default:
ohci_dbg (ohci,
"urb %p path %s ep%d%s %08x cc %d --> status %d\n",
urb, urb->dev->devpath,
usb_pipeendpoint (urb->pipe),
usb_pipein (urb->pipe) ? "in" : "out",
hc32_to_cpu (ohci, td->hwINFO),
cc, cc_to_error [cc]);
}
}
/* replies to the request have to be on a FIFO basis so
* we unreverse the hc-reversed done-list
*/
static struct td *dl_reverse_done_list (struct ohci_hcd *ohci)
{
u32 td_dma;
struct td *td_rev = NULL;
struct td *td = NULL;
td_dma = hc32_to_cpup (ohci, &ohci->hcca->done_head);
ohci->hcca->done_head = 0;
wmb();
/* get TD from hc's singly linked list, and
* prepend to ours. ed->td_list changes later.
*/
while (td_dma) {
int cc;
td = dma_to_td (ohci, td_dma);
if (!td) {
ohci_err (ohci, "bad entry %8x\n", td_dma);
break;
}
td->hwINFO |= cpu_to_hc32 (ohci, TD_DONE);
cc = TD_CC_GET (hc32_to_cpup (ohci, &td->hwINFO));
/* Non-iso endpoints can halt on error; un-halt,
* and dequeue any other TDs from this urb.
* No other TD could have caused the halt.
*/
if (cc != TD_CC_NOERROR
&& (td->ed->hwHeadP & cpu_to_hc32 (ohci, ED_H)))
ed_halted(ohci, td, cc);
td->next_dl_td = td_rev;
td_rev = td;
td_dma = hc32_to_cpup (ohci, &td->hwNextTD);
}
return td_rev;
}
/*-------------------------------------------------------------------------*/
/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
static void
finish_unlinks (struct ohci_hcd *ohci, u16 tick)
{
struct ed *ed, **last;
rescan_all:
for (last = &ohci->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
struct list_head *entry, *tmp;
int completed, modified;
__hc32 *prev;
/* only take off EDs that the HC isn't using, accounting for
* frame counter wraps and EDs with partially retired TDs
*/
if (likely(ohci->rh_state == OHCI_RH_RUNNING)) {
if (tick_before (tick, ed->tick)) {
skip_ed:
last = &ed->ed_next;
continue;
}
if (!list_empty (&ed->td_list)) {
struct td *td;
u32 head;
td = list_entry (ed->td_list.next, struct td,
td_list);
head = hc32_to_cpu (ohci, ed->hwHeadP) &
TD_MASK;
/* INTR_WDH may need to clean up first */
if (td->td_dma != head) {
if (ed == ohci->ed_to_check)
ohci->ed_to_check = NULL;
else
goto skip_ed;
}
}
}
/* reentrancy: if we drop the schedule lock, someone might
* have modified this list. normally it's just prepending
* entries (which we'd ignore), but paranoia won't hurt.
*/
*last = ed->ed_next;
ed->ed_next = NULL;
modified = 0;
/* unlink urbs as requested, but rescan the list after
* we call a completion since it might have unlinked
* another (earlier) urb
*
* When we get here, the HC doesn't see this ed. But it
* must not be rescheduled until all completed URBs have
* been given back to the driver.
*/
rescan_this:
completed = 0;
prev = &ed->hwHeadP;
list_for_each_safe (entry, tmp, &ed->td_list) {
struct td *td;
struct urb *urb;
urb_priv_t *urb_priv;
__hc32 savebits;
u32 tdINFO;
td = list_entry (entry, struct td, td_list);
urb = td->urb;
urb_priv = td->urb->hcpriv;
if (!urb->unlinked) {
prev = &td->hwNextTD;
continue;
}
/* patch pointer hc uses */
savebits = *prev & ~cpu_to_hc32 (ohci, TD_MASK);
*prev = td->hwNextTD | savebits;
/* If this was unlinked, the TD may not have been
* retired ... so manually save the data toggle.
* The controller ignores the value we save for
* control and ISO endpoints.
*/
tdINFO = hc32_to_cpup(ohci, &td->hwINFO);
if ((tdINFO & TD_T) == TD_T_DATA0)
ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_C);
else if ((tdINFO & TD_T) == TD_T_DATA1)
ed->hwHeadP |= cpu_to_hc32(ohci, ED_C);
/* HC may have partly processed this TD */
td_done (ohci, urb, td);
urb_priv->td_cnt++;
/* if URB is done, clean up */
if (urb_priv->td_cnt >= urb_priv->length) {
modified = completed = 1;
finish_urb(ohci, urb, 0);
}
}
if (completed && !list_empty (&ed->td_list))
goto rescan_this;
/* ED's now officially unlinked, hc doesn't see */
ed->state = ED_IDLE;
if (quirk_zfmicro(ohci) && ed->type == PIPE_INTERRUPT)
ohci->eds_scheduled--;
ed->hwHeadP &= ~cpu_to_hc32(ohci, ED_H);
ed->hwNextED = 0;
wmb ();
ed->hwINFO &= ~cpu_to_hc32 (ohci, ED_SKIP | ED_DEQUEUE);
/* but if there's work queued, reschedule */
if (!list_empty (&ed->td_list)) {
if (ohci->rh_state == OHCI_RH_RUNNING)
ed_schedule (ohci, ed);
}
if (modified)
goto rescan_all;
}
/* maybe reenable control and bulk lists */
if (ohci->rh_state == OHCI_RH_RUNNING && !ohci->ed_rm_list) {
u32 command = 0, control = 0;
if (ohci->ed_controltail) {
command |= OHCI_CLF;
if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_CLE)) {
control |= OHCI_CTRL_CLE;
ohci_writel (ohci, 0,
&ohci->regs->ed_controlcurrent);
}
}
if (ohci->ed_bulktail) {
command |= OHCI_BLF;
if (quirk_zfmicro(ohci))
mdelay(1);
if (!(ohci->hc_control & OHCI_CTRL_BLE)) {
control |= OHCI_CTRL_BLE;
ohci_writel (ohci, 0,
&ohci->regs->ed_bulkcurrent);
}
}
/* CLE/BLE to enable, CLF/BLF to (maybe) kickstart */
if (control) {
ohci->hc_control |= control;
if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, ohci->hc_control,
&ohci->regs->control);
}
if (command) {
if (quirk_zfmicro(ohci))
mdelay(1);
ohci_writel (ohci, command, &ohci->regs->cmdstatus);
}
}
}
/*-------------------------------------------------------------------------*/
/*
* Used to take back a TD from the host controller. This would normally be
* called from within dl_done_list, however it may be called directly if the
* HC no longer sees the TD and it has not appeared on the donelist (after
* two frames). This bug has been observed on ZF Micro systems.
*/
static void takeback_td(struct ohci_hcd *ohci, struct td *td)
{
struct urb *urb = td->urb;
urb_priv_t *urb_priv = urb->hcpriv;
struct ed *ed = td->ed;
int status;
/* update URB's length and status from TD */
status = td_done(ohci, urb, td);
urb_priv->td_cnt++;
/* If all this urb's TDs are done, call complete() */
if (urb_priv->td_cnt >= urb_priv->length)
finish_urb(ohci, urb, status);
/* clean schedule: unlink EDs that are no longer busy */
if (list_empty(&ed->td_list)) {
if (ed->state == ED_OPER)
start_ed_unlink(ohci, ed);
/* ... reenabling halted EDs only after fault cleanup */
} else if ((ed->hwINFO & cpu_to_hc32(ohci, ED_SKIP | ED_DEQUEUE))
== cpu_to_hc32(ohci, ED_SKIP)) {
td = list_entry(ed->td_list.next, struct td, td_list);
if (!(td->hwINFO & cpu_to_hc32(ohci, TD_DONE))) {
ed->hwINFO &= ~cpu_to_hc32(ohci, ED_SKIP);
/* ... hc may need waking-up */
switch (ed->type) {
case PIPE_CONTROL:
ohci_writel(ohci, OHCI_CLF,
&ohci->regs->cmdstatus);
break;
case PIPE_BULK:
ohci_writel(ohci, OHCI_BLF,
&ohci->regs->cmdstatus);
break;
}
}
}
}
/*
* Process normal completions (error or success) and clean the schedules.
*
* This is the main path for handing urbs back to drivers. The only other
* normal path is finish_unlinks(), which unlinks URBs using ed_rm_list,
* instead of scanning the (re-reversed) donelist as this does. There's
* an abnormal path too, handling a quirk in some Compaq silicon: URBs
* with TDs that appear to be orphaned are directly reclaimed.
*/
static void
dl_done_list (struct ohci_hcd *ohci)
{
struct td *td = dl_reverse_done_list (ohci);
while (td) {
struct td *td_next = td->next_dl_td;
struct ed *ed = td->ed;
/*
* Some OHCI controllers (NVIDIA for sure, maybe others)
* occasionally forget to add TDs to the done queue. Since
* TDs for a given endpoint are always processed in order,
* if we find a TD on the donelist then all of its
* predecessors must be finished as well.
*/
for (;;) {
struct td *td2;
td2 = list_first_entry(&ed->td_list, struct td,
td_list);
if (td2 == td)
break;
takeback_td(ohci, td2);
}
takeback_td(ohci, td);
td = td_next;
}
}
Reference in New Issue View Git Blame Copy Permalink