mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 17:12:06 +00:00
2c175615cd
Fixes the following W=1 kernel build warning(s): drivers/leds/leds-bcm6328.c:97: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Pavel Machek <pavel@ucw.cz> Cc: "Fernández Rojas" <noltari@gmail.com> Cc: Jonas Gorski <jogo@openwrt.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Pavel Machek <pavel@ucw.cz>
488 lines
13 KiB
C
488 lines
13 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for BCM6328 memory-mapped LEDs, based on leds-syscon.c
|
|
*
|
|
* Copyright 2015 Álvaro Fernández Rojas <noltari@gmail.com>
|
|
* Copyright 2015 Jonas Gorski <jogo@openwrt.org>
|
|
*/
|
|
#include <linux/io.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define BCM6328_REG_INIT 0x00
|
|
#define BCM6328_REG_MODE_HI 0x04
|
|
#define BCM6328_REG_MODE_LO 0x08
|
|
#define BCM6328_REG_HWDIS 0x0c
|
|
#define BCM6328_REG_STROBE 0x10
|
|
#define BCM6328_REG_LNKACTSEL_HI 0x14
|
|
#define BCM6328_REG_LNKACTSEL_LO 0x18
|
|
#define BCM6328_REG_RBACK 0x1c
|
|
#define BCM6328_REG_SERMUX 0x20
|
|
|
|
#define BCM6328_LED_MAX_COUNT 24
|
|
#define BCM6328_LED_DEF_DELAY 500
|
|
|
|
#define BCM6328_LED_BLINK_DELAYS 2
|
|
#define BCM6328_LED_BLINK_MS 20
|
|
|
|
#define BCM6328_LED_BLINK_MASK 0x3f
|
|
#define BCM6328_LED_BLINK1_SHIFT 0
|
|
#define BCM6328_LED_BLINK1_MASK (BCM6328_LED_BLINK_MASK << \
|
|
BCM6328_LED_BLINK1_SHIFT)
|
|
#define BCM6328_LED_BLINK2_SHIFT 6
|
|
#define BCM6328_LED_BLINK2_MASK (BCM6328_LED_BLINK_MASK << \
|
|
BCM6328_LED_BLINK2_SHIFT)
|
|
#define BCM6328_SERIAL_LED_EN BIT(12)
|
|
#define BCM6328_SERIAL_LED_MUX BIT(13)
|
|
#define BCM6328_SERIAL_LED_CLK_NPOL BIT(14)
|
|
#define BCM6328_SERIAL_LED_DATA_PPOL BIT(15)
|
|
#define BCM6328_SERIAL_LED_SHIFT_DIR BIT(16)
|
|
#define BCM6328_LED_SHIFT_TEST BIT(30)
|
|
#define BCM6328_LED_TEST BIT(31)
|
|
#define BCM6328_INIT_MASK (BCM6328_SERIAL_LED_EN | \
|
|
BCM6328_SERIAL_LED_MUX | \
|
|
BCM6328_SERIAL_LED_CLK_NPOL | \
|
|
BCM6328_SERIAL_LED_DATA_PPOL | \
|
|
BCM6328_SERIAL_LED_SHIFT_DIR)
|
|
|
|
#define BCM6328_LED_MODE_MASK 3
|
|
#define BCM6328_LED_MODE_ON 0
|
|
#define BCM6328_LED_MODE_BLINK1 1
|
|
#define BCM6328_LED_MODE_BLINK2 2
|
|
#define BCM6328_LED_MODE_OFF 3
|
|
#define BCM6328_LED_SHIFT(X) ((X) << 1)
|
|
|
|
/**
|
|
* struct bcm6328_led - state container for bcm6328 based LEDs
|
|
* @cdev: LED class device for this LED
|
|
* @mem: memory resource
|
|
* @lock: memory lock
|
|
* @pin: LED pin number
|
|
* @blink_leds: blinking LEDs
|
|
* @blink_delay: blinking delay
|
|
* @active_low: LED is active low
|
|
*/
|
|
struct bcm6328_led {
|
|
struct led_classdev cdev;
|
|
void __iomem *mem;
|
|
spinlock_t *lock;
|
|
unsigned long pin;
|
|
unsigned long *blink_leds;
|
|
unsigned long *blink_delay;
|
|
bool active_low;
|
|
};
|
|
|
|
static void bcm6328_led_write(void __iomem *reg, unsigned long data)
|
|
{
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
iowrite32be(data, reg);
|
|
#else
|
|
writel(data, reg);
|
|
#endif
|
|
}
|
|
|
|
static unsigned long bcm6328_led_read(void __iomem *reg)
|
|
{
|
|
#ifdef CONFIG_CPU_BIG_ENDIAN
|
|
return ioread32be(reg);
|
|
#else
|
|
return readl(reg);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* LEDMode 64 bits / 24 LEDs
|
|
* bits [31:0] -> LEDs 8-23
|
|
* bits [47:32] -> LEDs 0-7
|
|
* bits [63:48] -> unused
|
|
*/
|
|
static unsigned long bcm6328_pin2shift(unsigned long pin)
|
|
{
|
|
if (pin < 8)
|
|
return pin + 16; /* LEDs 0-7 (bits 47:32) */
|
|
else
|
|
return pin - 8; /* LEDs 8-23 (bits 31:0) */
|
|
}
|
|
|
|
static void bcm6328_led_mode(struct bcm6328_led *led, unsigned long value)
|
|
{
|
|
void __iomem *mode;
|
|
unsigned long val, shift;
|
|
|
|
shift = bcm6328_pin2shift(led->pin);
|
|
if (shift / 16)
|
|
mode = led->mem + BCM6328_REG_MODE_HI;
|
|
else
|
|
mode = led->mem + BCM6328_REG_MODE_LO;
|
|
|
|
val = bcm6328_led_read(mode);
|
|
val &= ~(BCM6328_LED_MODE_MASK << BCM6328_LED_SHIFT(shift % 16));
|
|
val |= (value << BCM6328_LED_SHIFT(shift % 16));
|
|
bcm6328_led_write(mode, val);
|
|
}
|
|
|
|
static void bcm6328_led_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct bcm6328_led *led =
|
|
container_of(led_cdev, struct bcm6328_led, cdev);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(led->lock, flags);
|
|
|
|
/* Remove LED from cached HW blinking intervals */
|
|
led->blink_leds[0] &= ~BIT(led->pin);
|
|
led->blink_leds[1] &= ~BIT(led->pin);
|
|
|
|
/* Set LED on/off */
|
|
if ((led->active_low && value == LED_OFF) ||
|
|
(!led->active_low && value != LED_OFF))
|
|
bcm6328_led_mode(led, BCM6328_LED_MODE_ON);
|
|
else
|
|
bcm6328_led_mode(led, BCM6328_LED_MODE_OFF);
|
|
|
|
spin_unlock_irqrestore(led->lock, flags);
|
|
}
|
|
|
|
static unsigned long bcm6328_blink_delay(unsigned long delay)
|
|
{
|
|
unsigned long bcm6328_delay;
|
|
|
|
bcm6328_delay = delay + BCM6328_LED_BLINK_MS / 2;
|
|
bcm6328_delay = bcm6328_delay / BCM6328_LED_BLINK_MS;
|
|
if (bcm6328_delay == 0)
|
|
bcm6328_delay = 1;
|
|
|
|
return bcm6328_delay;
|
|
}
|
|
|
|
static int bcm6328_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on, unsigned long *delay_off)
|
|
{
|
|
struct bcm6328_led *led =
|
|
container_of(led_cdev, struct bcm6328_led, cdev);
|
|
unsigned long delay, flags;
|
|
int rc;
|
|
|
|
if (!*delay_on)
|
|
*delay_on = BCM6328_LED_DEF_DELAY;
|
|
if (!*delay_off)
|
|
*delay_off = BCM6328_LED_DEF_DELAY;
|
|
|
|
delay = bcm6328_blink_delay(*delay_on);
|
|
if (delay != bcm6328_blink_delay(*delay_off)) {
|
|
dev_dbg(led_cdev->dev,
|
|
"fallback to soft blinking (delay_on != delay_off)\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (delay > BCM6328_LED_BLINK_MASK) {
|
|
dev_dbg(led_cdev->dev,
|
|
"fallback to soft blinking (delay > %ums)\n",
|
|
BCM6328_LED_BLINK_MASK * BCM6328_LED_BLINK_MS);
|
|
return -EINVAL;
|
|
}
|
|
|
|
spin_lock_irqsave(led->lock, flags);
|
|
/*
|
|
* Check if any of the two configurable HW blinking intervals is
|
|
* available:
|
|
* 1. No LEDs assigned to the HW blinking interval.
|
|
* 2. Only this LED is assigned to the HW blinking interval.
|
|
* 3. LEDs with the same delay assigned.
|
|
*/
|
|
if (led->blink_leds[0] == 0 ||
|
|
led->blink_leds[0] == BIT(led->pin) ||
|
|
led->blink_delay[0] == delay) {
|
|
unsigned long val;
|
|
|
|
/* Add LED to the first HW blinking interval cache */
|
|
led->blink_leds[0] |= BIT(led->pin);
|
|
|
|
/* Remove LED from the second HW blinking interval cache */
|
|
led->blink_leds[1] &= ~BIT(led->pin);
|
|
|
|
/* Cache first HW blinking interval delay */
|
|
led->blink_delay[0] = delay;
|
|
|
|
/* Update the delay for the first HW blinking interval */
|
|
val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
|
|
val &= ~BCM6328_LED_BLINK1_MASK;
|
|
val |= (delay << BCM6328_LED_BLINK1_SHIFT);
|
|
bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
|
|
|
|
/* Set the LED to first HW blinking interval */
|
|
bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK1);
|
|
|
|
rc = 0;
|
|
} else if (led->blink_leds[1] == 0 ||
|
|
led->blink_leds[1] == BIT(led->pin) ||
|
|
led->blink_delay[1] == delay) {
|
|
unsigned long val;
|
|
|
|
/* Remove LED from the first HW blinking interval */
|
|
led->blink_leds[0] &= ~BIT(led->pin);
|
|
|
|
/* Add LED to the second HW blinking interval */
|
|
led->blink_leds[1] |= BIT(led->pin);
|
|
|
|
/* Cache second HW blinking interval delay */
|
|
led->blink_delay[1] = delay;
|
|
|
|
/* Update the delay for the second HW blinking interval */
|
|
val = bcm6328_led_read(led->mem + BCM6328_REG_INIT);
|
|
val &= ~BCM6328_LED_BLINK2_MASK;
|
|
val |= (delay << BCM6328_LED_BLINK2_SHIFT);
|
|
bcm6328_led_write(led->mem + BCM6328_REG_INIT, val);
|
|
|
|
/* Set the LED to second HW blinking interval */
|
|
bcm6328_led_mode(led, BCM6328_LED_MODE_BLINK2);
|
|
|
|
rc = 0;
|
|
} else {
|
|
dev_dbg(led_cdev->dev,
|
|
"fallback to soft blinking (delay already set)\n");
|
|
rc = -EINVAL;
|
|
}
|
|
spin_unlock_irqrestore(led->lock, flags);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int bcm6328_hwled(struct device *dev, struct device_node *nc, u32 reg,
|
|
void __iomem *mem, spinlock_t *lock)
|
|
{
|
|
int i, cnt;
|
|
unsigned long flags, val;
|
|
|
|
spin_lock_irqsave(lock, flags);
|
|
val = bcm6328_led_read(mem + BCM6328_REG_HWDIS);
|
|
val &= ~BIT(reg);
|
|
bcm6328_led_write(mem + BCM6328_REG_HWDIS, val);
|
|
spin_unlock_irqrestore(lock, flags);
|
|
|
|
/* Only LEDs 0-7 can be activity/link controlled */
|
|
if (reg >= 8)
|
|
return 0;
|
|
|
|
cnt = of_property_count_elems_of_size(nc, "brcm,link-signal-sources",
|
|
sizeof(u32));
|
|
for (i = 0; i < cnt; i++) {
|
|
u32 sel;
|
|
void __iomem *addr;
|
|
|
|
if (reg < 4)
|
|
addr = mem + BCM6328_REG_LNKACTSEL_LO;
|
|
else
|
|
addr = mem + BCM6328_REG_LNKACTSEL_HI;
|
|
|
|
of_property_read_u32_index(nc, "brcm,link-signal-sources", i,
|
|
&sel);
|
|
|
|
if (reg / 4 != sel / 4) {
|
|
dev_warn(dev, "invalid link signal source\n");
|
|
continue;
|
|
}
|
|
|
|
spin_lock_irqsave(lock, flags);
|
|
val = bcm6328_led_read(addr);
|
|
val |= (BIT(reg % 4) << (((sel % 4) * 4) + 16));
|
|
bcm6328_led_write(addr, val);
|
|
spin_unlock_irqrestore(lock, flags);
|
|
}
|
|
|
|
cnt = of_property_count_elems_of_size(nc,
|
|
"brcm,activity-signal-sources",
|
|
sizeof(u32));
|
|
for (i = 0; i < cnt; i++) {
|
|
u32 sel;
|
|
void __iomem *addr;
|
|
|
|
if (reg < 4)
|
|
addr = mem + BCM6328_REG_LNKACTSEL_LO;
|
|
else
|
|
addr = mem + BCM6328_REG_LNKACTSEL_HI;
|
|
|
|
of_property_read_u32_index(nc, "brcm,activity-signal-sources",
|
|
i, &sel);
|
|
|
|
if (reg / 4 != sel / 4) {
|
|
dev_warn(dev, "invalid activity signal source\n");
|
|
continue;
|
|
}
|
|
|
|
spin_lock_irqsave(lock, flags);
|
|
val = bcm6328_led_read(addr);
|
|
val |= (BIT(reg % 4) << ((sel % 4) * 4));
|
|
bcm6328_led_write(addr, val);
|
|
spin_unlock_irqrestore(lock, flags);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm6328_led(struct device *dev, struct device_node *nc, u32 reg,
|
|
void __iomem *mem, spinlock_t *lock,
|
|
unsigned long *blink_leds, unsigned long *blink_delay)
|
|
{
|
|
struct led_init_data init_data = {};
|
|
struct bcm6328_led *led;
|
|
const char *state;
|
|
int rc;
|
|
|
|
led = devm_kzalloc(dev, sizeof(*led), GFP_KERNEL);
|
|
if (!led)
|
|
return -ENOMEM;
|
|
|
|
led->pin = reg;
|
|
led->mem = mem;
|
|
led->lock = lock;
|
|
led->blink_leds = blink_leds;
|
|
led->blink_delay = blink_delay;
|
|
|
|
if (of_property_read_bool(nc, "active-low"))
|
|
led->active_low = true;
|
|
|
|
if (!of_property_read_string(nc, "default-state", &state)) {
|
|
if (!strcmp(state, "on")) {
|
|
led->cdev.brightness = LED_FULL;
|
|
} else if (!strcmp(state, "keep")) {
|
|
void __iomem *mode;
|
|
unsigned long val, shift;
|
|
|
|
shift = bcm6328_pin2shift(led->pin);
|
|
if (shift / 16)
|
|
mode = mem + BCM6328_REG_MODE_HI;
|
|
else
|
|
mode = mem + BCM6328_REG_MODE_LO;
|
|
|
|
val = bcm6328_led_read(mode) >>
|
|
BCM6328_LED_SHIFT(shift % 16);
|
|
val &= BCM6328_LED_MODE_MASK;
|
|
if ((led->active_low && val == BCM6328_LED_MODE_OFF) ||
|
|
(!led->active_low && val == BCM6328_LED_MODE_ON))
|
|
led->cdev.brightness = LED_FULL;
|
|
else
|
|
led->cdev.brightness = LED_OFF;
|
|
} else {
|
|
led->cdev.brightness = LED_OFF;
|
|
}
|
|
} else {
|
|
led->cdev.brightness = LED_OFF;
|
|
}
|
|
|
|
bcm6328_led_set(&led->cdev, led->cdev.brightness);
|
|
|
|
led->cdev.brightness_set = bcm6328_led_set;
|
|
led->cdev.blink_set = bcm6328_blink_set;
|
|
init_data.fwnode = of_fwnode_handle(nc);
|
|
|
|
rc = devm_led_classdev_register_ext(dev, &led->cdev, &init_data);
|
|
if (rc < 0)
|
|
return rc;
|
|
|
|
dev_dbg(dev, "registered LED %s\n", led->cdev.name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bcm6328_leds_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct device_node *np = dev_of_node(&pdev->dev);
|
|
struct device_node *child;
|
|
void __iomem *mem;
|
|
spinlock_t *lock; /* memory lock */
|
|
unsigned long val, *blink_leds, *blink_delay;
|
|
|
|
mem = devm_platform_ioremap_resource(pdev, 0);
|
|
if (IS_ERR(mem))
|
|
return PTR_ERR(mem);
|
|
|
|
lock = devm_kzalloc(dev, sizeof(*lock), GFP_KERNEL);
|
|
if (!lock)
|
|
return -ENOMEM;
|
|
|
|
blink_leds = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
|
|
sizeof(*blink_leds), GFP_KERNEL);
|
|
if (!blink_leds)
|
|
return -ENOMEM;
|
|
|
|
blink_delay = devm_kcalloc(dev, BCM6328_LED_BLINK_DELAYS,
|
|
sizeof(*blink_delay), GFP_KERNEL);
|
|
if (!blink_delay)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(lock);
|
|
|
|
bcm6328_led_write(mem + BCM6328_REG_HWDIS, ~0);
|
|
bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_HI, 0);
|
|
bcm6328_led_write(mem + BCM6328_REG_LNKACTSEL_LO, 0);
|
|
|
|
val = bcm6328_led_read(mem + BCM6328_REG_INIT);
|
|
val &= ~(BCM6328_INIT_MASK);
|
|
if (of_property_read_bool(np, "brcm,serial-leds"))
|
|
val |= BCM6328_SERIAL_LED_EN;
|
|
if (of_property_read_bool(np, "brcm,serial-mux"))
|
|
val |= BCM6328_SERIAL_LED_MUX;
|
|
if (of_property_read_bool(np, "brcm,serial-clk-low"))
|
|
val |= BCM6328_SERIAL_LED_CLK_NPOL;
|
|
if (!of_property_read_bool(np, "brcm,serial-dat-low"))
|
|
val |= BCM6328_SERIAL_LED_DATA_PPOL;
|
|
if (!of_property_read_bool(np, "brcm,serial-shift-inv"))
|
|
val |= BCM6328_SERIAL_LED_SHIFT_DIR;
|
|
bcm6328_led_write(mem + BCM6328_REG_INIT, val);
|
|
|
|
for_each_available_child_of_node(np, child) {
|
|
int rc;
|
|
u32 reg;
|
|
|
|
if (of_property_read_u32(child, "reg", ®))
|
|
continue;
|
|
|
|
if (reg >= BCM6328_LED_MAX_COUNT) {
|
|
dev_err(dev, "invalid LED (%u >= %d)\n", reg,
|
|
BCM6328_LED_MAX_COUNT);
|
|
continue;
|
|
}
|
|
|
|
if (of_property_read_bool(child, "brcm,hardware-controlled"))
|
|
rc = bcm6328_hwled(dev, child, reg, mem, lock);
|
|
else
|
|
rc = bcm6328_led(dev, child, reg, mem, lock,
|
|
blink_leds, blink_delay);
|
|
|
|
if (rc < 0) {
|
|
of_node_put(child);
|
|
return rc;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id bcm6328_leds_of_match[] = {
|
|
{ .compatible = "brcm,bcm6328-leds", },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bcm6328_leds_of_match);
|
|
|
|
static struct platform_driver bcm6328_leds_driver = {
|
|
.probe = bcm6328_leds_probe,
|
|
.driver = {
|
|
.name = "leds-bcm6328",
|
|
.of_match_table = bcm6328_leds_of_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(bcm6328_leds_driver);
|
|
|
|
MODULE_AUTHOR("Álvaro Fernández Rojas <noltari@gmail.com>");
|
|
MODULE_AUTHOR("Jonas Gorski <jogo@openwrt.org>");
|
|
MODULE_DESCRIPTION("LED driver for BCM6328 controllers");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_ALIAS("platform:leds-bcm6328");
|