linux/drivers/clk/Kconfig
Linus Torvalds 9512433987 There's one large change in the core clk framework here. We change how
clk_set_rate_range() works so that the frequency is re-evaulated each time the
 rate is changed. Previously we wouldn't let clk providers see a rate that was
 different if it was still within the range, which could be bad for power if the
 clk could run slower when a range expands. Now the clk provider can decide to
 do something differently when the constraints change. This broke Nvidia's clk
 driver so we had to wait for the fix for that to bake a little more in -next.
 
 The rate range patch series also introduced a kunit suite for the clk framework
 that we're going to extend in the next release. It already made it easy to find
 corner cases in the rate range patches so I'm excited to see it cover more clk
 code and increase our confidence in core framework patches in the future. I
 also added a kunit test for the basic clk gate code and that work will continue
 to cover more basic clk types: muxes, dividers, etc.
 
 Beyond the core code we have the usual set of clk driver updates and additions.
 Qualcomm again dominates the diffstat here with lots more SoCs being supported
 and i.MX follows afer that with a similar number of SoCs gaining clk drivers.
 Beyond those large additions there's drivers being modernized to use
 clk_parent_data so we can move away from global string names for all the clks
 in an SoC. Finally there's lots of little fixes all over the clk drivers for
 typos, warnings, and missing clks that aren't critical and get batched up
 waiting for the next merge window to open. Nothing super big stands out in the
 driver pile. Full details are below.
 
 Core:
  - Make clk_set_rate_range() re-evaluate the limits each time
  - Introduce various clk_set_rate_range() tests
  - Add clk_drop_range() to drop a previously set range
 
 New Drivers:
  - i.MXRT1050 clock driver and bindings
  - i.MX8DXL clock driver and bindings
  - i.MX93 clock driver and bindings
  - NCO blocks on Apple SoCs
  - Audio clks on StarFive JH7100 RISC-V SoC
  - Add support for the new Renesas RZ/V2L SoC
  - Qualcomm SDX65 A7 PLL
  - Qualcomm SM6350 GPU clks
  - Qualcomm SM6125, SM6350, QCS2290 display clks
  - Qualcomm MSM8226 multimedia clks
 
 Updates:
  - Kunit tests for clk-gate implementation
  - Terminate arrays with sentinels and make that clearer
  - Cleanup SPDX tags
  - Fix typos in comments
  - Mark mux table as const in clk-mux
  - Make the all_lists array const
  - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding and add
    support for dynamic mode
  - Clock configuration on Microchip PolarFire SoCs
  - Free allocations on probe error in Mediatek clk driver
  - Modernize Mediatek clk driver by consolidating code
  - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks on
    Renesas R-Car S4-8
  - Improve the clocks for the Rockchip rk3568 display outputs (parenting, pll-rates)
  - Use of_device_get_match_data() instead of open-coding on Rockchip rk3568
  - Reintroduce the expected fractional-divider behaviour that disappeared
    with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
  - Remove SYS PLL 1/2 clock gates for i.MX8M*
  - Remove AUDIO MCLK ROOT from i.MX7D
  - Add fracn gppll clock type used by i.MX93
  - Add new composite clock for i.MX93
  - Add missing media mipi phy ref clock for i.MX8MP
  - Fix off by one in imx_lpcg_parse_clks_from_dt()
  - Rework for the imx pll14xx
  - sama7g5: One low priority fix for GCLK of PDMC
  - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
  - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
  - Add CAN-FD clocks on Renesas R-Car V3U
  - Qualcomm SC8280XP RPMCC
  - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
  - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to YAML
  - Convert various Qualcomm drivers to use clk_parent_data
  - Remove test clocks from various Qualcomm drivers
  - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
  - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
  - Better pixel clk frequency support on Qualcomm RCG2 clks
 -----BEGIN PGP SIGNATURE-----
 
 iQJFBAABCAAvFiEE9L57QeeUxqYDyoaDrQKIl8bklSUFAmJDd+gRHHNib3lkQGtl
 cm5lbC5vcmcACgkQrQKIl8bklSVB4A//QWPv7tssTuHvVDOPz2q9rJFbjG6/fsuY
 d8i30y4uTSCWO2eErVUNKxRmrR5/DFJZ20cqv5aTXbiUk5BrmCiD0hyb8RZIU4jD
 Kw+1pEvnbBWR6s5TK0spMS9Nz9Uq8DBwoeczHAVQrRZu0I8AkOvWlVH7GncejYOP
 KJJSiuByXHRLxudrLWTwwkz3xoDTZBeBcqNbBnatgXnPgSzBh0Uz+0q8r9V9Hugw
 +TwXoTVt+XDrX2ihPzZlfm9xoOTOP6GoP+FYCo8gCfW4N0VjUDr3+D95rJoI2gp/
 O9UyAx1+tMLlkVxuHcX1npHDPX6Nrqan68DBV4LQRdhSO3dfVD95AE16GzMrD+2t
 nuIzT+rst42UUzipCK/8pHLd/YCcPmIsH4C25ZnaF/I59kI/seF3zbekMTY7hS8D
 q9sTZYj1X32aHGTtN6QK6QJIscGHYfnSG3M8VLOnhmWDKmW+6AWJ2MVZdcCqDgnS
 AXnx1p7gwd/lHV8P+e1YoiUyh5a3tJ2CFFdQCu0tPwL0xLehHyfjKqtjYZjL2+hl
 6pF8KxEy6BiMEZWqXmIUJK6xWFO9VpQ2uPxtV8pCTIAXmOOPenWhH7lkeTtIDRc0
 hzJURj9HEcpEDakC4/16yfr+YnEn/vjhhZ8a4Vymsnl2IsI71C17vDmRer875Bp/
 KPMBn6I1naQ=
 =fP8L
 -----END PGP SIGNATURE-----

Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "There's one large change in the core clk framework here. We change how
  clk_set_rate_range() works so that the frequency is re-evaulated each
  time the rate is changed. Previously we wouldn't let clk providers see
  a rate that was different if it was still within the range, which
  could be bad for power if the clk could run slower when a range
  expands. Now the clk provider can decide to do something differently
  when the constraints change. This broke Nvidia's clk driver so we had
  to wait for the fix for that to bake a little more in -next.

  The rate range patch series also introduced a kunit suite for the clk
  framework that we're going to extend in the next release. It already
  made it easy to find corner cases in the rate range patches so I'm
  excited to see it cover more clk code and increase our confidence in
  core framework patches in the future. I also added a kunit test for
  the basic clk gate code and that work will continue to cover more
  basic clk types: muxes, dividers, etc.

  Beyond the core code we have the usual set of clk driver updates and
  additions. Qualcomm again dominates the diffstat here with lots more
  SoCs being supported and i.MX follows afer that with a similar number
  of SoCs gaining clk drivers. Beyond those large additions there's
  drivers being modernized to use clk_parent_data so we can move away
  from global string names for all the clks in an SoC. Finally there's
  lots of little fixes all over the clk drivers for typos, warnings, and
  missing clks that aren't critical and get batched up waiting for the
  next merge window to open. Nothing super big stands out in the driver
  pile. Full details are below.

  Core:
   - Make clk_set_rate_range() re-evaluate the limits each time
   - Introduce various clk_set_rate_range() tests
   - Add clk_drop_range() to drop a previously set range

  New Drivers:
   - i.MXRT1050 clock driver and bindings
   - i.MX8DXL clock driver and bindings
   - i.MX93 clock driver and bindings
   - NCO blocks on Apple SoCs
   - Audio clks on StarFive JH7100 RISC-V SoC
   - Add support for the new Renesas RZ/V2L SoC
   - Qualcomm SDX65 A7 PLL
   - Qualcomm SM6350 GPU clks
   - Qualcomm SM6125, SM6350, QCS2290 display clks
   - Qualcomm MSM8226 multimedia clks

  Updates:
   - Kunit tests for clk-gate implementation
   - Terminate arrays with sentinels and make that clearer
   - Cleanup SPDX tags
   - Fix typos in comments
   - Mark mux table as const in clk-mux
   - Make the all_lists array const
   - Convert Cirrus Logic CS2000P driver to regmap, yamlify DT binding
     and add support for dynamic mode
   - Clock configuration on Microchip PolarFire SoCs
   - Free allocations on probe error in Mediatek clk driver
   - Modernize Mediatek clk driver by consolidating code
   - Add watchdog (WDT), I2C, and pin function controller (PFC) clocks
     on Renesas R-Car S4-8
   - Improve the clocks for the Rockchip rk3568 display outputs
     (parenting, pll-rates)
   - Use of_device_get_match_data() instead of open-coding on Rockchip
     rk3568
   - Reintroduce the expected fractional-divider behaviour that
     disappeared with the addition of CLK_FRAC_DIVIDER_POWER_OF_TWO_PS
   - Remove SYS PLL 1/2 clock gates for i.MX8M*
   - Remove AUDIO MCLK ROOT from i.MX7D
   - Add fracn gppll clock type used by i.MX93
   - Add new composite clock for i.MX93
   - Add missing media mipi phy ref clock for i.MX8MP
   - Fix off by one in imx_lpcg_parse_clks_from_dt()
   - Rework for the imx pll14xx
   - sama7g5: One low priority fix for GCLK of PDMC
   - Add DMA engine (SYS-DMAC) clocks on Renesas R-Car S4-8
   - Add MOST (MediaLB I/F) clocks on Renesas R-Car E3 and D3
   - Add CAN-FD clocks on Renesas R-Car V3U
   - Qualcomm SC8280XP RPMCC
   - Add some missing clks on Qualcomm MSM8992/MSM8994/MSM8998 SoCs
   - Rework Qualcomm GCC bindings and convert SDM845 camera bindig to
     YAML
   - Convert various Qualcomm drivers to use clk_parent_data
   - Remove test clocks from various Qualcomm drivers
   - Crypto engine clks on Qualcomm IPQ806x + more freqs for SDCC/NSS
   - Qualcomm SM8150 EMAC, PCIe, UFS GDSCs
   - Better pixel clk frequency support on Qualcomm RCG2 clks"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (227 commits)
  clk: zynq: Update the parameters to zynq_clk_register_periph_clk
  clk: zynq: trivial warning fix
  clk: Drop the rate range on clk_put()
  clk: test: Test clk_set_rate_range on orphan mux
  clk: Initialize orphan req_rate
  dt-bindings: clock: drop useless consumer example
  dt-bindings: clock: renesas: Make example 'clocks' parsable
  clk: qcom: gcc-msm8994: Fix gpll4 width
  dt-bindings: clock: fix dt_binding_check error for qcom,gcc-other.yaml
  clk: rs9: Add Renesas 9-series PCIe clock generator driver
  clk: fixed-factor: Introduce devm_clk_hw_register_fixed_factor_index()
  clk: visconti: prevent array overflow in visconti_clk_register_gates()
  dt-bindings: clk: rs9: Add Renesas 9-series I2C PCIe clock generator
  clk: sifive: Move all stuff into SoCs header files from C files
  clk: sifive: Add SoCs prefix in each SoCs-dependent data
  riscv: dts: Change the macro name of prci in each device node
  dt-bindings: change the macro name of prci in header files and example
  clk: sifive: duplicate the macro definitions for the time being
  clk: qcom: sm6125-gcc: fix typos in comments
  clk: ti: clkctrl: fix typos in comments
  ...
2022-03-30 10:11:04 -07:00

467 lines
14 KiB
Plaintext

# SPDX-License-Identifier: GPL-2.0
config HAVE_CLK
bool
help
The <linux/clk.h> calls support software clock gating and
thus are a key power management tool on many systems.
config HAVE_CLK_PREPARE
bool
config HAVE_LEGACY_CLK # TODO: Remove once all legacy users are migrated
bool
select HAVE_CLK
help
Select this option when the clock API in <linux/clk.h> is implemented
by platform/architecture code. This method is deprecated. Modern
code should select COMMON_CLK instead and not define a custom
'struct clk'.
menuconfig COMMON_CLK
bool "Common Clock Framework"
depends on !HAVE_LEGACY_CLK
select HAVE_CLK_PREPARE
select HAVE_CLK
select SRCU
select RATIONAL
help
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
Architectures utilizing the common struct clk should select
this option.
if COMMON_CLK
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
help
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
source "drivers/clk/versatile/Kconfig"
config CLK_HSDK
bool "PLL Driver for HSDK platform"
depends on ARC_SOC_HSDK || COMPILE_TEST
depends on HAS_IOMEM
help
This driver supports the HSDK core, system, ddr, tunnel and hdmi PLLs
control.
config LMK04832
tristate "Ti LMK04832 JESD204B Compliant Clock Jitter Cleaner"
depends on SPI
select REGMAP_SPI
help
Say yes here to build support for Texas Instruments' LMK04832 Ultra
Low-Noise JESD204B Compliant Clock Jitter Cleaner With Dual Loop PLLs
config COMMON_CLK_APPLE_NCO
tristate "Clock driver for Apple SoC NCOs"
depends on ARCH_APPLE || COMPILE_TEST
default ARCH_APPLE
help
This driver supports NCO (Numerically Controlled Oscillator) blocks
found on Apple SoCs such as t8103 (M1). The blocks are typically
generators of audio clocks.
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77620/77686/77802 MFD"
depends on MFD_MAX77686 || MFD_MAX77620 || COMPILE_TEST
help
This driver supports Maxim 77620/77686/77802 crystal oscillator
clock.
config COMMON_CLK_MAX9485
tristate "Maxim 9485 Programmable Clock Generator"
depends on I2C
help
This driver supports Maxim 9485 Programmable Audio Clock Generator
config COMMON_CLK_RK808
tristate "Clock driver for RK805/RK808/RK809/RK817/RK818"
depends on MFD_RK808
help
This driver supports RK805, RK809 and RK817, RK808 and RK818 crystal oscillator clock.
These multi-function devices have two fixed-rate oscillators, clocked at 32KHz each.
Clkout1 is always on, Clkout2 can off by control register.
config COMMON_CLK_HI655X
tristate "Clock driver for Hi655x" if EXPERT
depends on (MFD_HI655X_PMIC || COMPILE_TEST)
depends on REGMAP
default MFD_HI655X_PMIC
help
This driver supports the hi655x PMIC clock. This
multi-function device has one fixed-rate oscillator, clocked
at 32KHz.
config COMMON_CLK_SCMI
tristate "Clock driver controlled via SCMI interface"
depends on ARM_SCMI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCMI interface.
This driver uses SCMI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
help
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
This driver uses SCPI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SI5341
tristate "Clock driver for SiLabs 5341 and 5340 A/B/C/D devices"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs Si5341 and Si5340 programmable clock
generators. Not all features of these chips are currently supported
by the driver, in particular it only supports XTAL input. The chip can
be pre-programmed to support other configurations and features not yet
implemented in the driver.
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
help
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
config COMMON_CLK_SI514
tristate "Clock driver for SiLabs 514 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Silicon Labs 514 programmable clock
generator.
config COMMON_CLK_SI544
tristate "Clock driver for SiLabs 544 devices"
depends on I2C
select REGMAP_I2C
help
This driver supports the Silicon Labs 544 programmable clock
generator.
config COMMON_CLK_SI570
tristate "Clock driver for SiLabs 570 and compatible devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
config COMMON_CLK_BM1880
bool "Clock driver for Bitmain BM1880 SoC"
depends on ARCH_BITMAIN || COMPILE_TEST
default ARCH_BITMAIN
help
This driver supports the clocks on Bitmain BM1880 SoC.
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
help
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_TPS68470
tristate "Clock Driver for TI TPS68470 PMIC"
depends on I2C
depends on INTEL_SKL_INT3472 || COMPILE_TEST
select REGMAP_I2C
help
This driver supports the clocks provided by the TPS68470 PMIC.
config COMMON_CLK_CDCE925
tristate "Clock driver for TI CDCE913/925/937/949 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the TI CDCE913/925/937/949 programmable clock
synthesizer. Each chip has different number of PLLs and outputs.
For example, the CDCE925 contains two PLLs with spread-spectrum
clocking support and five output dividers. The driver only supports
the following setup, and uses a fixed setting for the output muxes.
Y1 is derived from the input clock
Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.
config COMMON_CLK_CS2000_CP
tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
depends on I2C
select REGMAP_I2C
help
If you say yes here you get support for the CS2000 clock multiplier.
config COMMON_CLK_FSL_FLEXSPI
tristate "Clock driver for FlexSPI on Layerscape SoCs"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE && SPI_NXP_FLEXSPI
help
On Layerscape SoCs there is a special clock for the FlexSPI
interface.
config COMMON_CLK_FSL_SAI
bool "Clock driver for BCLK of Freescale SAI cores"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
help
This driver supports the Freescale SAI (Synchronous Audio Interface)
to be used as a generic clock output. Some SoCs have restrictions
regarding the possible pin multiplexer settings. Eg. on some SoCs
two SAI interfaces can only be enabled together. If just one is
needed, the BCLK pin of the second one can be used as general
purpose clock output. Ideally, it can be used to drive an audio
codec (sometimes known as MCLK).
config COMMON_CLK_GEMINI
bool "Clock driver for Cortina Systems Gemini SoC"
depends on ARCH_GEMINI || COMPILE_TEST
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Cortina Systems Gemini
platform, also known as SL3516 or CS3516.
config COMMON_CLK_LAN966X
bool "Generic Clock Controller driver for LAN966X SoC"
depends on HAS_IOMEM
depends on OF
depends on SOC_LAN966 || COMPILE_TEST
help
This driver provides support for Generic Clock Controller(GCK) on
LAN966X SoC. GCK generates and supplies clock to various peripherals
within the SoC.
config COMMON_CLK_ASPEED
bool "Clock driver for Aspeed BMC SoCs"
depends on ARCH_ASPEED || COMPILE_TEST
default ARCH_ASPEED
select MFD_SYSCON
select RESET_CONTROLLER
help
This driver supports the SoC clocks on the Aspeed BMC platforms.
The G4 and G5 series, including the ast2400 and ast2500, are supported
by this driver.
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE || COMPILE_TEST
help
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
help
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on HAS_IOMEM || COMPILE_TEST
depends on OF
help
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on OF
depends on PPC_E500MC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
help
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
config CLK_LS1028A_PLLDIG
tristate "Clock driver for LS1028A Display output"
depends on ARCH_LAYERSCAPE || COMPILE_TEST
default ARCH_LAYERSCAPE
help
This driver support the Display output interfaces(LCD, DPHY) pixel clocks
of the QorIQ Layerscape LS1028A, as implemented TSMC CLN28HPM PLL. Not all
features of the PLL are currently supported by the driver. By default,
configured bypass mode with this PLL.
config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default ARCH_XGENE
depends on ARM64 || COMPILE_TEST
help
Support for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_LOCHNAGAR
tristate "Cirrus Logic Lochnagar clock driver"
depends on MFD_LOCHNAGAR
help
This driver supports the clocking features of the Cirrus Logic
Lochnagar audio development board.
config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
select MFD_SYSCON if ARCH_LPC18XX
help
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
help
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
help
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
help
Support for the Marvell PXA SoC.
config COMMON_CLK_OXNAS
bool "Clock driver for the OXNAS SoC Family"
depends on ARCH_OXNAS || COMPILE_TEST
select MFD_SYSCON
help
Support for the OXNAS SoC Family clocks.
config COMMON_CLK_RS9_PCIE
tristate "Clock driver for Renesas 9-series PCIe clock generators"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the Renesas 9-series PCIe clock generator
models 9FGV/9DBV/9DMV/9FGL/9DML/9QXL/9SQ.
config COMMON_CLK_VC5
tristate "Clock driver for IDT VersaClock 5,6 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
This driver supports the IDT VersaClock 5 and VersaClock 6
programmable clock generators.
config COMMON_CLK_STM32MP157
def_bool COMMON_CLK && MACH_STM32MP157
help
Support for stm32mp157 SoC family clocks
config COMMON_CLK_STM32F
def_bool COMMON_CLK && (MACH_STM32F429 || MACH_STM32F469 || MACH_STM32F746)
help
Support for stm32f4 and stm32f7 SoC families clocks
config COMMON_CLK_STM32H7
def_bool COMMON_CLK && MACH_STM32H743
help
Support for stm32h7 SoC family clocks
config COMMON_CLK_MMP2
def_bool COMMON_CLK && (MACH_MMP2_DT || MACH_MMP3_DT)
help
Support for Marvell MMP2 and MMP3 SoC clocks
config COMMON_CLK_MMP2_AUDIO
tristate "Clock driver for MMP2 Audio subsystem"
depends on COMMON_CLK_MMP2 || COMPILE_TEST
help
This driver supports clocks for Audio subsystem on MMP2 SoC.
config COMMON_CLK_BD718XX
tristate "Clock driver for 32K clk gates on ROHM PMICs"
depends on MFD_ROHM_BD718XX || MFD_ROHM_BD71828
help
This driver supports ROHM BD71837, BD71847, BD71850, BD71815
and BD71828 PMICs clock gates.
config COMMON_CLK_FIXED_MMIO
bool "Clock driver for Memory Mapped Fixed values"
depends on COMMON_CLK && OF
help
Support for Memory Mapped IO Fixed clocks
config COMMON_CLK_K210
bool "Clock driver for the Canaan Kendryte K210 SoC"
depends on OF && RISCV && SOC_CANAAN
default SOC_CANAAN
help
Support for the Canaan Kendryte K210 RISC-V SoC clocks.
source "drivers/clk/actions/Kconfig"
source "drivers/clk/analogbits/Kconfig"
source "drivers/clk/baikal-t1/Kconfig"
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/imgtec/Kconfig"
source "drivers/clk/imx/Kconfig"
source "drivers/clk/ingenic/Kconfig"
source "drivers/clk/keystone/Kconfig"
source "drivers/clk/mediatek/Kconfig"
source "drivers/clk/meson/Kconfig"
source "drivers/clk/mstar/Kconfig"
source "drivers/clk/microchip/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/pistachio/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/ralink/Kconfig"
source "drivers/clk/renesas/Kconfig"
source "drivers/clk/rockchip/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/sifive/Kconfig"
source "drivers/clk/socfpga/Kconfig"
source "drivers/clk/sprd/Kconfig"
source "drivers/clk/starfive/Kconfig"
source "drivers/clk/sunxi/Kconfig"
source "drivers/clk/sunxi-ng/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
source "drivers/clk/uniphier/Kconfig"
source "drivers/clk/visconti/Kconfig"
source "drivers/clk/x86/Kconfig"
source "drivers/clk/xilinx/Kconfig"
source "drivers/clk/zynqmp/Kconfig"
# Kunit test cases
config CLK_KUNIT_TEST
tristate "Basic Clock Framework Kunit Tests" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit tests for the common clock framework.
config CLK_GATE_KUNIT_TEST
tristate "Basic gate type Kunit test" if !KUNIT_ALL_TESTS
depends on KUNIT
default KUNIT_ALL_TESTS
help
Kunit test for the basic clk gate type.
endif