linux/include/asm-mips/dec/kn01.h
Maciej W. Rozycki a5fc9c0bbe Use physical addresses at the interface level, letting drivers remap
them as appropriate.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2005-10-29 19:31:35 +01:00

92 lines
3.3 KiB
C

/*
* Hardware info about DECstation DS2100/3100 systems (otherwise known as
* pmin/pmax or KN01).
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995,1996 by Paul M. Antoine, some code and definitions
* are by courtesy of Chris Fraser.
* Copyright (C) 2002, 2003, 2005 Maciej W. Rozycki
*/
#ifndef __ASM_MIPS_DEC_KN01_H
#define __ASM_MIPS_DEC_KN01_H
#define KN01_SLOT_BASE 0x10000000
#define KN01_SLOT_SIZE 0x01000000
/*
* Address ranges for devices.
*/
#define KN01_PMASK (0*KN01_SLOT_SIZE) /* color plane mask */
#define KN01_PCC (1*KN01_SLOT_SIZE) /* PCC (DC503) cursor */
#define KN01_VDAC (2*KN01_SLOT_SIZE) /* color map */
#define KN01_RES_3 (3*KN01_SLOT_SIZE) /* unused */
#define KN01_RES_4 (4*KN01_SLOT_SIZE) /* unused */
#define KN01_RES_5 (5*KN01_SLOT_SIZE) /* unused */
#define KN01_RES_6 (6*KN01_SLOT_SIZE) /* unused */
#define KN01_ERRADDR (7*KN01_SLOT_SIZE) /* write error address */
#define KN01_LANCE (8*KN01_SLOT_SIZE) /* LANCE (Am7990) Ethernet */
#define KN01_LANCE_MEM (9*KN01_SLOT_SIZE) /* LANCE buffer memory */
#define KN01_SII (10*KN01_SLOT_SIZE) /* SII (DC7061) SCSI */
#define KN01_SII_MEM (11*KN01_SLOT_SIZE) /* SII buffer memory */
#define KN01_DZ11 (12*KN01_SLOT_SIZE) /* DZ11 (DC7085) serial */
#define KN01_RTC (13*KN01_SLOT_SIZE) /* DS1287 RTC (bytes #0) */
#define KN01_ESAR (13*KN01_SLOT_SIZE) /* MAC address (bytes #1) */
#define KN01_CSR (14*KN01_SLOT_SIZE) /* system ctrl & status reg */
#define KN01_SYS_ROM (15*KN01_SLOT_SIZE) /* system board ROM */
/*
* Frame buffer memory address.
*/
#define KN01_VFB_MEM 0x0fc00000
/*
* CPU interrupt bits.
*/
#define KN01_CPU_INR_BUS 6 /* memory, I/O bus read/write errors */
#define KN01_CPU_INR_VIDEO 6 /* PCC area detect #2 */
#define KN01_CPU_INR_RTC 5 /* DS1287 RTC */
#define KN01_CPU_INR_DZ11 4 /* DZ11 (DC7085) serial */
#define KN01_CPU_INR_LANCE 3 /* LANCE (Am7990) Ethernet */
#define KN01_CPU_INR_SII 2 /* SII (DC7061) SCSI */
/*
* System Control & Status Register bits.
*/
#define KN01_CSR_MNFMOD (1<<15) /* MNFMOD manufacturing jumper */
#define KN01_CSR_STATUS (1<<14) /* self-test result status output */
#define KN01_CSR_PARDIS (1<<13) /* parity error disable */
#define KN01_CSR_CRSRTST (1<<12) /* PCC test output */
#define KN01_CSR_MONO (1<<11) /* mono/color fb SIMM installed */
#define KN01_CSR_MEMERR (1<<10) /* write timeout error status & ack*/
#define KN01_CSR_VINT (1<<9) /* PCC area detect #2 status & ack */
#define KN01_CSR_TXDIS (1<<8) /* DZ11 transmit disable */
#define KN01_CSR_VBGTRG (1<<2) /* blue DAC voltage over green (r/o) */
#define KN01_CSR_VRGTRG (1<<1) /* red DAC voltage over green (r/o) */
#define KN01_CSR_VRGTRB (1<<0) /* red DAC voltage over blue (r/o) */
#define KN01_CSR_LEDS (0xff<<0) /* ~diagnostic LEDs (w/o) */
#ifndef __ASSEMBLY__
#include <linux/interrupt.h>
#include <linux/spinlock.h>
#include <linux/types.h>
struct pt_regs;
extern u16 cached_kn01_csr;
extern spinlock_t kn01_lock;
extern void dec_kn01_be_init(void);
extern int dec_kn01_be_handler(struct pt_regs *regs, int is_fixup);
extern irqreturn_t dec_kn01_be_interrupt(int irq, void *dev_id,
struct pt_regs *regs);
#endif
#endif /* __ASM_MIPS_DEC_KN01_H */