linux/drivers/ata
Egor Starkov 5bca462d2d ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode.
Extended testing has shown that the imx ahci driver sometimes requires
more than the 100 attempts currently alotted in the driver to perform a
successful temperature reading when running at minimum (throttled) CPU
frequency.

Debugging suggests that the read cycle can take 160 attempts (which given
that the driver averages 80 readings from the ADC equates to one failure
on each read).

Increase the attempt limit to 200 in order to greatly reduce the
likelihood of the driver failing to perform a temperature reading,
especially at low CPU frequency.

Signed-off-by: Egor Starkov <egor.starkov@ge.com>
Signed-off-by: Martyn Welch <martyn.welch@collabora.co.uk>
Signed-off-by: Tejun Heo <tj@kernel.org>
2017-11-13 12:17:43 -08:00
..
acard-ahci.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
ahci_brcm.c ata: ahci_brcm: Avoid writing to read-only registers 2017-06-22 16:13:00 -04:00
ahci_ceva.c ata: ceva: Add SMMU support for SATA IP 2017-10-23 07:09:27 -07:00
ahci_da850.c sata: ahci-da850: Fix some error handling paths in 'ahci_da850_probe()' 2017-08-16 07:38:27 -07:00
ahci_dm816.c ata: ahci: add support for DaVinci DM816 SATA controller 2017-03-24 11:40:03 -04:00
ahci_imx.c ahci: imx: Handle increased read failures for IMX53 temperature sensor in low frequency mode. 2017-11-13 12:17:43 -08:00
ahci_mtk.c ata: mediatek: add support for MediaTek SATA controller 2017-08-28 10:54:42 -07:00
ahci_mvebu.c ata: ahci_mvebu: add support for Armada 3700 variant 2016-02-18 12:41:17 -05:00
ahci_octeon.c Delete redundant return value check of platform_get_resource() 2017-03-06 15:40:59 -05:00
ahci_platform.c ata: ahci_platform: Add shutdown handler 2017-08-04 13:34:14 -07:00
ahci_qoriq.c ahci: qoriq: add ls1088a platforms support 2017-06-02 09:49:33 -04:00
ahci_seattle.c ata: fix return value check in ahci_seattle_get_port_info() 2016-06-15 14:26:41 -04:00
ahci_st.c ahci: st: Add ports-implemented property in support 2016-08-10 12:16:49 -04:00
ahci_sunxi.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_tegra.c ata: ahci_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
ahci_xgene.c ata: ahci_xgene: free structure returned by acpi_get_object_info() 2017-01-06 11:39:14 -05:00
ahci.c ahci: Add support for Cavium's fifth generation SATA controller 2017-10-11 07:08:13 -07:00
ahci.h libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag 2017-06-22 16:12:59 -04:00
ata_generic.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
ata_piix.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
Kconfig Merge branch 'for-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2017-09-06 22:41:21 -07:00
libahci_platform.c ata: mark expected switch fall-throughs 2017-10-23 07:06:09 -07:00
libahci.c libata: Add the AHCI_HFLAG_NO_WRITE_TO_RO flag 2017-06-22 16:12:59 -04:00
libata-acpi.c ACPI and power management updates for 3.15-rc1 2014-04-01 12:48:54 -07:00
libata-core.c libata: fix spelling mistake: 'ambigious' -> 'ambiguous' 2017-10-30 08:07:14 -07:00
libata-eh.c ata: fixes kernel crash while tracing ata_eh_link_autopsy event 2017-11-03 06:23:06 -07:00
libata-pmp.c ata: pmp: add quirk for Marvell 4140 SATA PMP 2015-07-14 17:46:38 -04:00
libata-scsi.c libata: make static arrays const, reduces object code size 2017-09-19 11:53:11 -07:00
libata-sff.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
libata-trace.c libata: NCQ encapsulation for ZAC MANAGEMENT OUT 2016-05-09 12:36:46 -04:00
libata-transport.c libata: transport: Remove circular dependency at free time 2017-03-06 15:24:48 -05:00
libata-transport.h
libata-zpodd.c libata: zpodd: make arrays cdb static, reduces object code size 2017-09-06 07:40:28 -07:00
libata.h libata: make ata_port_type const 2017-10-02 09:57:55 -07:00
Makefile ata: mediatek: add support for MediaTek SATA controller 2017-08-28 10:54:42 -07:00
pata_acpi.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ali.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_amd.c cs5536: add support for IDE controller variant 2017-08-11 10:35:07 -07:00
pata_arasan_cf.c drivers: ata: pata_arasan_cf: use the same name for the same lock 2016-06-28 12:49:40 -04:00
pata_artop.c ata: pata_artop: remove redundant initialization of pio 2017-09-18 20:24:21 -07:00
pata_at32.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_atiixp.c Revert "pata_atiixp: Don't use unconnected secondary port on SB600/SB700" 2017-03-27 13:52:00 -04:00
pata_atp867x.c ata: mark expected switch fall-throughs 2017-10-23 07:06:09 -07:00
pata_bf54x.c ata: bf54x: cut drvdata assignment 2017-05-30 11:54:36 -04:00
pata_bk3710.c pata_bk3710: clear status bits of BMISP on chipset initialization 2017-03-30 16:13:04 +05:30
pata_cmd64x.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cmd640.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5520.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_cs5530.c ata: Delete unnecessary checks before the function call "pci_dev_put" 2015-02-03 07:04:44 -05:00
pata_cs5535.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_cs5536.c cs5536: add support for IDE controller variant 2017-08-11 10:35:07 -07:00
pata_cypress.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_efar.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ep93xx.c ata: ep93xx: cut drvdata assignment 2017-05-30 11:54:36 -04:00
pata_falcon.c Merge branch 'for-4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata 2017-02-21 17:21:32 -08:00
pata_ftide010.c ata: ftide010: fix resource printing 2017-06-21 18:06:18 -04:00
pata_hpt3x2n.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt3x3.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_hpt37x.c ata: delete non-required instances of include <linux/init.h> 2014-02-13 16:40:56 -05:00
pata_hpt366.c ata: hpt366: fix incorrect mask when checking at cmd_high_time 2016-07-12 11:02:05 -04:00
pata_icside.c scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS 2016-04-15 16:53:14 -04:00
pata_imx.c pata: imx: support controller modes up to PIO4 2016-11-09 11:48:58 -05:00
pata_isapnp.c PNP: ata/pata_isapnp: Use module_pnp_driver to register driver 2015-03-18 22:39:17 +01:00
pata_it821x.c pata_it821x: use "const char *" for string literals 2015-10-15 10:58:53 -04:00
pata_it8213.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ixp4xx_cf.c ata: pass queued command to ->sff_data_xfer method 2017-01-10 11:11:17 -05:00
pata_jmicron.c PCI: Disable async suspend/resume for JMicron multi-function SATA/AHCI 2015-08-24 15:27:11 -05:00
pata_legacy.c ata: pass queued command to ->sff_data_xfer method 2017-01-10 11:11:17 -05:00
pata_macio.c ata: constify of_device_id structures 2017-03-06 15:18:01 -05:00
pata_marvell.c ata: Use IS_ENABLED() instead of checking for built-in or module 2016-05-27 11:27:23 -04:00
pata_mpc52xx.c ata: constify of_device_id structures 2017-03-06 15:18:01 -05:00
pata_mpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_netcell.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ninja32.c pata_ninja32: Avoid corrupting status flags 2016-08-30 11:59:47 -04:00
pata_ns87410.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_ns87415.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_octeon_cf.c pata_octeon_cf: use of_property_read_{bool|u32}() 2017-08-28 10:44:24 -07:00
pata_of_platform.c ata: constify of_device_id structures 2017-03-06 15:18:01 -05:00
pata_oldpiix.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_opti.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_optidma.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_palmld.c ata: drop owner assignment from platform_drivers 2014-10-20 16:20:17 +02:00
pata_pcmcia.c ata: pass queued command to ->sff_data_xfer method 2017-01-10 11:11:17 -05:00
pata_pdc202xx_old.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_pdc2027x.c ata: pata_pdc2027x: Fix space before '[' error. 2017-10-30 09:19:06 -07:00
pata_piccolo.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_platform.c ata: pata_platform: fix owner module reference mismatch for scsi host 2015-01-28 18:45:23 -05:00
pata_pxa.c ata: pata_pxa: dmaengine conversion 2015-09-10 17:02:04 -04:00
pata_radisys.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_rb532_cf.c ata: rb532_cf: cut drvdata assignment 2017-05-30 11:54:37 -04:00
pata_rdc.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
pata_rz1000.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_samsung_cf.c ata: samsung_cf: cut drvdata assignment 2017-05-30 11:54:37 -04:00
pata_sc1200.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sch.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
pata_serverworks.c pata_serverworks: disable 64-KB DMA transfers on Broadcom OSB4 IDE Controller 2014-10-07 17:10:14 -04:00
pata_sil680.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
pata_sis.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_sl82c105.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_triflex.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pata_via.c ata: use CONFIG_PM_SLEEP instead of CONFIG_PM where applicable in host drivers 2014-05-09 22:37:49 -04:00
pdc_adma.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_dwc_460ex.c ata: sata_dwc_460ex: Propagate platform device ID to DMA driver 2017-11-13 12:17:11 -08:00
sata_fsl.c ata: sata_fsl: cut drvdata assignment 2017-05-30 11:54:37 -04:00
sata_gemini.c ata: sata_gemini: Introduce explicit IDE pin control 2017-08-11 10:32:09 -07:00
sata_gemini.h ata: Add driver for Faraday Technology FTIDE010 2017-06-12 12:02:51 -04:00
sata_highbank.c remove lots of IS_ERR_VALUE abuses 2016-05-27 15:26:11 -07:00
sata_inic162x.c ata: declare ata_port_info structures as const 2017-06-12 14:06:34 -04:00
sata_mv.c ata: mark expected switch fall-throughs 2017-10-23 07:06:09 -07:00
sata_nv.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_promise.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_promise.h ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_qstor.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_rcar.c ata: sata_rcar: Use of_device_get_match_data() helper 2017-10-04 07:18:29 -07:00
sata_sil24.c ata: remove deprecated use of pci api 2015-04-08 10:55:05 -04:00
sata_sil.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_sis.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_svw.c ata: Convert to using %pOF instead of full_name 2017-07-18 18:02:36 -04:00
sata_sx4.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_uli.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sata_via.c sata_via: Enable optional hotplug on VT6420 2017-06-26 16:54:53 -04:00
sata_vsc.c ata: update references for libata documentation 2017-05-16 11:25:59 -04:00
sis.h