linux/drivers/tty/serial
Linus Torvalds e6d69a60b7 Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dma
Pull slave-dmaengine changes from Vinod Koul:
 "This brings for slave dmaengine:

   - Change dma notification flag to DMA_COMPLETE from DMA_SUCCESS as
     dmaengine can only transfer and not verify validaty of dma
     transfers

   - Bunch of fixes across drivers:

      - cppi41 driver fixes from Daniel

      - 8 channel freescale dma engine support and updated bindings from
        Hongbo

      - msx-dma fixes and cleanup by Markus

   - DMAengine updates from Dan:

      - Bartlomiej and Dan finalized a rework of the dma address unmap
        implementation.

      - In the course of testing 1/ a collection of enhancements to
        dmatest fell out.  Notably basic performance statistics, and
        fixed / enhanced test control through new module parameters
        'run', 'wait', 'noverify', and 'verbose'.  Thanks to Andriy and
        Linus [Walleij] for their review.

      - Testing the raid related corner cases of 1/ triggered bugs in
        the recently added 16-source operation support in the ioatdma
        driver.

      - Some minor fixes / cleanups to mv_xor and ioatdma"

* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (99 commits)
  dma: mv_xor: Fix mis-usage of mmio 'base' and 'high_base' registers
  dma: mv_xor: Remove unneeded NULL address check
  ioat: fix ioat3_irq_reinit
  ioat: kill msix_single_vector support
  raid6test: add new corner case for ioatdma driver
  ioatdma: clean up sed pool kmem_cache
  ioatdma: fix selection of 16 vs 8 source path
  ioatdma: fix sed pool selection
  ioatdma: Fix bug in selftest after removal of DMA_MEMSET.
  dmatest: verbose mode
  dmatest: convert to dmaengine_unmap_data
  dmatest: add a 'wait' parameter
  dmatest: add basic performance metrics
  dmatest: add support for skipping verification and random data setup
  dmatest: use pseudo random numbers
  dmatest: support xor-only, or pq-only channels in tests
  dmatest: restore ability to start test at module load and init
  dmatest: cleanup redundant "dmatest: " prefixes
  dmatest: replace stored results mechanism, with uniform messages
  Revert "dmatest: append verify result to results"
  ...
2013-11-20 13:20:24 -08:00
..
8250 serial: 8250_pci: add Pericom PCIe Serial board Support (12d8:7952/4/8) - Chip PI7C9X7952/4/8 2013-10-19 19:51:17 -07:00
cpm_uart Merge remote-tracking branch 'grant/devicetree/next' into for-next 2013-11-07 10:34:46 -06:00
jsm
21285.c
68328serial.c Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu 2013-05-10 07:22:35 -07:00
altera_jtaguart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
altera_uart.c ARM: SoC DT updates for 3.12 2013-09-06 13:26:27 -07:00
amba-pl010.c serial: Remove unnecessary amba_set_drvdata() 2013-10-03 16:09:47 -07:00
amba-pl011.c serial: Remove unnecessary amba_set_drvdata() 2013-10-03 16:09:47 -07:00
apbuart.c tty: serial: apbuart: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:33 -07:00
apbuart.h
ar933x_uart.c tty: ar933x_uart: add device tree support and binding documentation 2013-08-30 14:11:27 -07:00
arc_uart.c serial: arc_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
atmel_serial.c tty/serial: at91: add a fallback option to determine uart/usart property 2013-10-17 13:31:19 -07:00
bcm63xx_uart.c tty: serial: bcm63xx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
bfin_sport_uart.c serial: bfin_sport_uart: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
bfin_sport_uart.h
bfin_uart.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
clps711x.c serial: clps711x: drop needless devm_clk_put 2013-09-26 15:44:46 -07:00
crisv10.c
crisv10.h
dz.c
dz.h
efm32-uart.c tty: serial: efm32: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
fsl_lpuart.c serial: fsl_lpuart: Return proper error on lpuart_serial_init error path 2013-07-26 16:01:20 -07:00
icom.c serial: icom: move array overflow checks earlier 2013-08-27 16:24:33 -07:00
icom.h
ifx6x60.c serial: ifx6x60: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
ifx6x60.h
imx.c TTY/Serial driver updates for 3.13-rc1 2013-11-07 12:17:06 +09:00
ioc3_serial.c
ioc4_serial.c serial: ioc4_serial: Staticize ioc4_serial_attach_one() 2013-08-12 11:35:32 -07:00
ip22zilog.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
ip22zilog.h
Kconfig serial: sh-sci: Enable the driver on all ARM platforms 2013-10-29 17:01:02 -07:00
kgdb_nmi.c
kgdboc.c treewide: Convert retrun typos to return 2013-09-04 12:26:36 +02:00
lantiq.c serial: MIPS: lantiq: fix clock error check 2013-08-12 11:37:48 -07:00
lpc32xx_hs.c tty: serial: lpc32xx_hs: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio_reg.h
m32r_sio.c tty: serial: m32r_sio: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
m32r_sio.h
Makefile Merge git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile 2013-09-06 11:14:33 -07:00
max310x.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
max3100.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
mcf.c tty: serial: mcf: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
mfd.c serial: mfd: Staticize local symbols 2013-10-29 16:34:11 -07:00
mpc52xx_uart.c serial: mpc52xx: remove reference to .set_wake() 2013-10-16 13:16:19 -07:00
mpsc.c serial: mpsc: Remove casting the return value which is a void pointer 2013-09-26 14:29:58 -07:00
mrst_max3110.c mrst_max3110: fix unbalanced IRQ issue during resume 2013-10-29 16:26:54 -07:00
mrst_max3110.h
msm_serial_hs.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
msm_serial.c msm_serial: Send more than 1 character on the console w/ UARTDM 2013-08-27 16:22:59 -07:00
msm_serial.h msm_serial: Make baud_code detection more dynamic 2013-07-26 16:13:29 -07:00
msm_smd_tty.c
mux.c
mxs-auart.c serial: mxs-auart: set the FIFO size to DMA buffer size 2013-10-05 18:03:01 -07:00
netx-serial.c tty: serial: netx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:34 -07:00
nwpserial.c tty: serial: nwpserial: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
of_serial.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
omap-serial.c serial: omap: fix missing comma 2013-10-31 09:03:20 -07:00
pch_uart.c serial: pch_uart: remove reference to .set_wake() 2013-10-16 13:16:19 -07:00
pmac_zilog.c DeviceTree updates for 3.13. This is a bit larger pull request than 2013-11-12 16:52:17 +09:00
pmac_zilog.h
pnx8xxx_uart.c tty: serial: pnx8xxx: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
pxa.c serial: pxa: Staticize local symbols 2013-08-12 11:10:16 -07:00
rp2.c tty: serial: rp2: drop uart_port->lock before calling tty_flip_buffer_push() 2013-08-27 16:17:35 -07:00
sa1100.c serial: sa1100: delete .set_wake callback 2013-10-16 13:16:18 -07:00
samsung.c serial: samsung: add support for manual RTS setting 2013-09-26 15:41:38 -07:00
samsung.h serial: samsung: Remove casting the return value which is a void pointer 2013-09-26 14:29:59 -07:00
sb1250-duart.c
sc26xx.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
sccnxp.c serial: sccnxp: missing uart_unregister_driver() on error in sccnxp_probe() 2013-09-26 15:44:45 -07:00
serial_core.c serial: report base_baud after initialization 2013-07-26 16:03:05 -07:00
serial_ks8695.c
serial_txx9.c serial: txx9: remove unnecessary pci_set_drvdata() 2013-09-26 15:41:38 -07:00
serial-tegra.c serial: tegra: remove deprecated IRQF_DISABLED 2013-10-07 00:13:58 -07:00
sh-sci.c serial: sh: use DMA_COMPLETE for dma completion status 2013-10-25 11:16:19 +05:30
sh-sci.h
sirfsoc_uart.c serial: sirf: don't submit dma desc after timeout irqs occur 2013-09-26 15:41:39 -07:00
sirfsoc_uart.h serial: sirf: remove duplicate defines 2013-10-29 16:26:54 -07:00
sn_console.c
st-asc.c serial: st-asc: remove unnecessary platform_set_drvdata() 2013-08-27 16:24:33 -07:00
suncore.c
sunhv.c serial: use platform_{get,set}_drvdata() 2013-06-03 10:21:33 -07:00
sunsab.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunsab.h
sunsu.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunzilog.c tty: Remove unnecessary semicolons 2013-10-16 13:08:16 -07:00
sunzilog.h
tilegx.c tilegx: Add tty serial support for TILE-Gx on-chip UART 2013-09-03 14:50:40 -04:00
timbuart.c serial: timbuart: Staticize local symbols 2013-08-12 11:35:31 -07:00
timbuart.h
uartlite.c
ucc_uart.c DeviceTree updates for 3.13. This is a bit larger pull request than 2013-11-12 16:52:17 +09:00
vr41xx_siu.c serial: use dev_get_platdata() 2013-07-31 17:56:15 -07:00
vt8500_serial.c serial: vt8500: add missing braces 2013-10-16 13:22:16 -07:00
xilinx_uartps.c tty: xuartps: Fix build error when COMMON_CLK is not set 2013-10-29 09:26:11 -07:00
zs.c
zs.h