Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-14 16:12:02 +00:00
Code Issues Packages Projects Releases Wiki Activity
5b40104edf
linux/drivers/hid/wacom_wac.c
Jason Gerecke 5b40104edf HID: wacom: generic: Reset events back to zero when pen leaves 
As a pen leaves, we need to be sure to reset all events back to zero
so that userspace is able to get the complete pen state when it enters
proximity again.

Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Reviewed-by: Ping Cheng <ping.cheng@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2017-09-13 19:18:01 +02:00

4570 lines
142 KiB
C
Raw Blame History

/*
* drivers/input/tablet/wacom_wac.c
*
* USB Wacom tablet support - Wacom specific code
*
*/
/*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include "wacom_wac.h"
#include "wacom.h"
#include <linux/input/mt.h>
/* resolution for penabled devices */
#define WACOM_PL_RES 20
#define WACOM_PENPRTN_RES 40
#define WACOM_VOLITO_RES 50
#define WACOM_GRAPHIRE_RES 80
#define WACOM_INTUOS_RES 100
#define WACOM_INTUOS3_RES 200
/* Newer Cintiq and DTU have an offset between tablet and screen areas */
#define WACOM_DTU_OFFSET 200
#define WACOM_CINTIQ_OFFSET 400
/*
* Scale factor relating reported contact size to logical contact area.
* 2^14/pi is a good approximation on Intuos5 and 3rd-gen Bamboo
*/
#define WACOM_CONTACT_AREA_SCALE 2607
static bool touch_arbitration = 1;
module_param(touch_arbitration, bool, 0644);
MODULE_PARM_DESC(touch_arbitration, " on (Y) off (N)");
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
int button_count, int mask);
static int wacom_numbered_button_to_key(int n);
static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
int group);
/*
* Percent of battery capacity for Graphire.
* 8th value means AC online and show 100% capacity.
*/
static unsigned short batcap_gr[8] = { 1, 15, 25, 35, 50, 70, 100, 100 };
/*
* Percent of battery capacity for Intuos4 WL, AC has a separate bit.
*/
static unsigned short batcap_i4[8] = { 1, 15, 30, 45, 60, 70, 85, 100 };
static void __wacom_notify_battery(struct wacom_battery *battery,
int bat_status, int bat_capacity,
bool bat_charging, bool bat_connected,
bool ps_connected)
{
bool changed = battery->bat_status != bat_status ||
battery->battery_capacity != bat_capacity ||
battery->bat_charging != bat_charging ||
battery->bat_connected != bat_connected ||
battery->ps_connected != ps_connected;
if (changed) {
battery->bat_status = bat_status;
battery->battery_capacity = bat_capacity;
battery->bat_charging = bat_charging;
battery->bat_connected = bat_connected;
battery->ps_connected = ps_connected;
if (battery->battery)
power_supply_changed(battery->battery);
}
}
static void wacom_notify_battery(struct wacom_wac *wacom_wac,
int bat_status, int bat_capacity, bool bat_charging,
bool bat_connected, bool ps_connected)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
__wacom_notify_battery(&wacom->battery, bat_status, bat_capacity,
bat_charging, bat_connected, ps_connected);
}
static int wacom_penpartner_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
switch (data[0]) {
case 1:
if (data[5] & 0x80) {
wacom->tool[0] = (data[5] & 0x20) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
wacom->id[0] = (data[5] & 0x20) ? ERASER_DEVICE_ID : STYLUS_DEVICE_ID;
input_report_key(input, wacom->tool[0], 1);
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -127));
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
} else {
input_report_key(input, wacom->tool[0], 0);
input_report_abs(input, ABS_MISC, 0); /* report tool id */
input_report_abs(input, ABS_PRESSURE, -1);
input_report_key(input, BTN_TOUCH, 0);
}
break;
case 2:
input_report_key(input, BTN_TOOL_PEN, 1);
input_report_abs(input, ABS_MISC, STYLUS_DEVICE_ID); /* report tool id */
input_report_abs(input, ABS_X, get_unaligned_le16(&data[1]));
input_report_abs(input, ABS_Y, get_unaligned_le16(&data[3]));
input_report_abs(input, ABS_PRESSURE, (signed char)data[6] + 127);
input_report_key(input, BTN_TOUCH, ((signed char)data[6] > -80) && !(data[5] & 0x20));
input_report_key(input, BTN_STYLUS, (data[5] & 0x40));
break;
default:
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
return 1;
}
static int wacom_pl_irq(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int prox, pressure;
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
prox = data[1] & 0x40;
if (!wacom->id[0]) {
if ((data[0] & 0x10) || (data[4] & 0x20)) {
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
}
else {
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
}
/* If the eraser is in prox, STYLUS2 is always set. If we
* mis-detected the type and notice that STYLUS2 isn't set
* then force the eraser out of prox and let the pen in.
*/
if (wacom->tool[0] == BTN_TOOL_RUBBER && !(data[4] & 0x20)) {
input_report_key(input, BTN_TOOL_RUBBER, 0);
input_report_abs(input, ABS_MISC, 0);
input_sync(input);
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
if (prox) {
pressure = (signed char)((data[7] << 1) | ((data[4] >> 2) & 1));
if (features->pressure_max > 255)
pressure = (pressure << 1) | ((data[4] >> 6) & 1);
pressure += (features->pressure_max + 1) / 2;
input_report_abs(input, ABS_X, data[3] | (data[2] << 7) | ((data[1] & 0x03) << 14));
input_report_abs(input, ABS_Y, data[6] | (data[5] << 7) | ((data[4] & 0x03) << 14));
input_report_abs(input, ABS_PRESSURE, pressure);
input_report_key(input, BTN_TOUCH, data[4] & 0x08);
input_report_key(input, BTN_STYLUS, data[4] & 0x10);
/* Only allow the stylus2 button to be reported for the pen tool. */
input_report_key(input, BTN_STYLUS2, (wacom->tool[0] == BTN_TOOL_PEN) && (data[4] & 0x20));
}
if (!prox)
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
static int wacom_ptu_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
if (data[1] & 0x04) {
input_report_key(input, BTN_TOOL_RUBBER, data[1] & 0x20);
input_report_key(input, BTN_TOUCH, data[1] & 0x08);
wacom->id[0] = ERASER_DEVICE_ID;
} else {
input_report_key(input, BTN_TOOL_PEN, data[1] & 0x20);
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
wacom->id[0] = STYLUS_DEVICE_ID;
}
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, le16_to_cpup((__le16 *)&data[6]));
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
return 1;
}
static int wacom_dtu_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int prox = data[1] & 0x20;
dev_dbg(input->dev.parent,
"%s: received report #%d", __func__, data[0]);
if (prox) {
/* Going into proximity select tool */
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
if (wacom->tool[0] == BTN_TOOL_PEN)
wacom->id[0] = STYLUS_DEVICE_ID;
else
wacom->id[0] = ERASER_DEVICE_ID;
}
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x01) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
if (!prox) /* out-prox */
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
static int wacom_dtus_irq(struct wacom_wac *wacom)
{
char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
unsigned short prox, pressure = 0;
if (data[0] != WACOM_REPORT_DTUS && data[0] != WACOM_REPORT_DTUSPAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d", __func__, data[0]);
return 0;
} else if (data[0] == WACOM_REPORT_DTUSPAD) {
input = wacom->pad_input;
input_report_key(input, BTN_0, (data[1] & 0x01));
input_report_key(input, BTN_1, (data[1] & 0x02));
input_report_key(input, BTN_2, (data[1] & 0x04));
input_report_key(input, BTN_3, (data[1] & 0x08));
input_report_abs(input, ABS_MISC,
data[1] & 0x0f ? PAD_DEVICE_ID : 0);
return 1;
} else {
prox = data[1] & 0x80;
if (prox) {
switch ((data[1] >> 3) & 3) {
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
break;
case 2: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
break;
}
}
input_report_key(input, BTN_STYLUS, data[1] & 0x20);
input_report_key(input, BTN_STYLUS2, data[1] & 0x40);
input_report_abs(input, ABS_X, get_unaligned_be16(&data[3]));
input_report_abs(input, ABS_Y, get_unaligned_be16(&data[5]));
pressure = ((data[1] & 0x03) << 8) | (data[2] & 0xff);
input_report_abs(input, ABS_PRESSURE, pressure);
input_report_key(input, BTN_TOUCH, pressure > 10);
if (!prox) /* out-prox */
wacom->id[0] = 0;
input_report_key(input, wacom->tool[0], prox);
input_report_abs(input, ABS_MISC, wacom->id[0]);
return 1;
}
}
static int wacom_graphire_irq(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
struct input_dev *pad_input = wacom->pad_input;
int battery_capacity, ps_connected;
int prox;
int rw = 0;
int retval = 0;
if (features->type == GRAPHIRE_BT) {
if (data[0] != WACOM_REPORT_PENABLED_BT) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__,
data[0]);
goto exit;
}
} else if (data[0] != WACOM_REPORT_PENABLED) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
goto exit;
}
prox = data[1] & 0x80;
if (prox || wacom->id[0]) {
if (prox) {
switch ((data[1] >> 5) & 3) {
case 0: /* Pen */
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
break;
case 1: /* Rubber */
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
break;
case 2: /* Mouse with wheel */
input_report_key(input, BTN_MIDDLE, data[1] & 0x04);
/* fall through */
case 3: /* Mouse without wheel */
wacom->tool[0] = BTN_TOOL_MOUSE;
wacom->id[0] = CURSOR_DEVICE_ID;
break;
}
}
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
if (wacom->tool[0] != BTN_TOOL_MOUSE) {
if (features->type == GRAPHIRE_BT)
input_report_abs(input, ABS_PRESSURE, data[6] |
(((__u16) (data[1] & 0x08)) << 5));
else
input_report_abs(input, ABS_PRESSURE, data[6] |
((data[7] & 0x03) << 8));
input_report_key(input, BTN_TOUCH, data[1] & 0x01);
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x04);
} else {
input_report_key(input, BTN_LEFT, data[1] & 0x01);
input_report_key(input, BTN_RIGHT, data[1] & 0x02);
if (features->type == WACOM_G4 ||
features->type == WACOM_MO) {
input_report_abs(input, ABS_DISTANCE, data[6] & 0x3f);
rw = (data[7] & 0x04) - (data[7] & 0x03);
} else if (features->type == GRAPHIRE_BT) {
/* Compute distance between mouse and tablet */
rw = 44 - (data[6] >> 2);
rw = clamp_val(rw, 0, 31);
input_report_abs(input, ABS_DISTANCE, rw);
if (((data[1] >> 5) & 3) == 2) {
/* Mouse with wheel */
input_report_key(input, BTN_MIDDLE,
data[1] & 0x04);
rw = (data[6] & 0x01) ? -1 :
(data[6] & 0x02) ? 1 : 0;
} else {
rw = 0;
}
} else {
input_report_abs(input, ABS_DISTANCE, data[7] & 0x3f);
rw = -(signed char)data[6];
}
input_report_rel(input, REL_WHEEL, rw);
}
if (!prox)
wacom->id[0] = 0;
input_report_abs(input, ABS_MISC, wacom->id[0]); /* report tool id */
input_report_key(input, wacom->tool[0], prox);
input_sync(input); /* sync last event */
}
/* send pad data */
switch (features->type) {
case WACOM_G4:
prox = data[7] & 0xf8;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_BACK, (data[7] & 0x40));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x80));
rw = ((data[7] & 0x18) >> 3) - ((data[7] & 0x20) >> 3);
input_report_rel(pad_input, REL_WHEEL, rw);
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
case WACOM_MO:
prox = (data[7] & 0xf8) || data[8];
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_BACK, (data[7] & 0x08));
input_report_key(pad_input, BTN_LEFT, (data[7] & 0x20));
input_report_key(pad_input, BTN_FORWARD, (data[7] & 0x10));
input_report_key(pad_input, BTN_RIGHT, (data[7] & 0x40));
input_report_abs(pad_input, ABS_WHEEL, (data[8] & 0x7f));
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
case GRAPHIRE_BT:
prox = data[7] & 0x03;
if (prox || wacom->id[1]) {
wacom->id[1] = PAD_DEVICE_ID;
input_report_key(pad_input, BTN_0, (data[7] & 0x02));
input_report_key(pad_input, BTN_1, (data[7] & 0x01));
if (!prox)
wacom->id[1] = 0;
input_report_abs(pad_input, ABS_MISC, wacom->id[1]);
retval = 1;
}
break;
}
/* Store current battery capacity and power supply state */
if (features->type == GRAPHIRE_BT) {
rw = (data[7] >> 2 & 0x07);
battery_capacity = batcap_gr[rw];
ps_connected = rw == 7;
wacom_notify_battery(wacom, WACOM_POWER_SUPPLY_STATUS_AUTO,
battery_capacity, ps_connected, 1,
ps_connected);
}
exit:
return retval;
}
static void wacom_intuos_schedule_prox_event(struct wacom_wac *wacom_wac)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_features *features = &wacom_wac->features;
struct hid_report *r;
struct hid_report_enum *re;
re = &(wacom->hdev->report_enum[HID_FEATURE_REPORT]);
if (features->type == INTUOSHT2)
r = re->report_id_hash[WACOM_REPORT_INTUOSHT2_ID];
else
r = re->report_id_hash[WACOM_REPORT_INTUOS_ID1];
if (r) {
hid_hw_request(wacom->hdev, r, HID_REQ_GET_REPORT);
}
}
static int wacom_intuos_pad(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pad_input;
int i;
int buttons = 0, nbuttons = features->numbered_buttons;
int keys = 0, nkeys = 0;
int ring1 = 0, ring2 = 0;
int strip1 = 0, strip2 = 0;
bool prox = false;
/* pad packets. Works as a second tool and is always in prox */
if (!(data[0] == WACOM_REPORT_INTUOSPAD || data[0] == WACOM_REPORT_INTUOS5PAD ||
data[0] == WACOM_REPORT_CINTIQPAD))
return 0;
if (features->type >= INTUOS4S && features->type <= INTUOS4L) {
buttons = (data[3] << 1) | (data[2] & 0x01);
ring1 = data[1];
} else if (features->type == DTK) {
buttons = data[6];
} else if (features->type == WACOM_13HD) {
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == WACOM_24HD) {
buttons = (data[8] << 8) | data[6];
ring1 = data[1];
ring2 = data[2];
/*
* Three "buttons" are available on the 24HD which are
* physically implemented as a touchstrip. Each button
* is approximately 3 bits wide with a 2 bit spacing.
* The raw touchstrip bits are stored at:
* ((data[3] & 0x1f) << 8) | data[4])
*/
nkeys = 3;
keys = ((data[3] & 0x1C) ? 1<<2 : 0) |
((data[4] & 0xE0) ? 1<<1 : 0) |
((data[4] & 0x07) ? 1<<0 : 0);
} else if (features->type == WACOM_27QHD) {
nkeys = 3;
keys = data[2] & 0x07;
input_report_abs(input, ABS_X, be16_to_cpup((__be16 *)&data[4]));
input_report_abs(input, ABS_Y, be16_to_cpup((__be16 *)&data[6]));
input_report_abs(input, ABS_Z, be16_to_cpup((__be16 *)&data[8]));
} else if (features->type == CINTIQ_HYBRID) {
/*
* Do not send hardware buttons under Android. They
* are already sent to the system through GPIO (and
* have different meaning).
*
* d-pad right -> data[4] & 0x10
* d-pad up -> data[4] & 0x20
* d-pad left -> data[4] & 0x40
* d-pad down -> data[4] & 0x80
* d-pad center -> data[3] & 0x01
*/
buttons = (data[4] << 1) | (data[3] & 0x01);
} else if (features->type == CINTIQ_COMPANION_2) {
/* d-pad right -> data[4] & 0x10
* d-pad up -> data[4] & 0x20
* d-pad left -> data[4] & 0x40
* d-pad down -> data[4] & 0x80
* d-pad center -> data[3] & 0x01
*/
buttons = ((data[2] >> 4) << 7) |
((data[1] & 0x04) << 6) |
((data[2] & 0x0F) << 2) |
(data[1] & 0x03);
} else if (features->type >= INTUOS5S && features->type <= INTUOSPL) {
/*
* ExpressKeys on Intuos5/Intuos Pro have a capacitive sensor in
* addition to the mechanical switch. Switch data is
* stored in data[4], capacitive data in data[5].
*
* Touch ring mode switch (data[3]) has no capacitive sensor
*/
buttons = (data[4] << 1) | (data[3] & 0x01);
ring1 = data[2];
} else {
if (features->type == WACOM_21UX2 || features->type == WACOM_22HD) {
buttons = (data[8] << 10) | ((data[7] & 0x01) << 9) |
(data[6] << 1) | (data[5] & 0x01);
if (features->type == WACOM_22HD) {
nkeys = 3;
keys = data[9] & 0x07;
}
} else {
buttons = ((data[6] & 0x10) << 5) |
((data[5] & 0x10) << 4) |
((data[6] & 0x0F) << 4) |
(data[5] & 0x0F);
}
strip1 = ((data[1] & 0x1f) << 8) | data[2];
strip2 = ((data[3] & 0x1f) << 8) | data[4];
}
prox = (buttons & ~(~0 << nbuttons)) | (keys & ~(~0 << nkeys)) |
(ring1 & 0x80) | (ring2 & 0x80) | strip1 | strip2;
wacom_report_numbered_buttons(input, nbuttons, buttons);
for (i = 0; i < nkeys; i++)
input_report_key(input, KEY_PROG1 + i, keys & (1 << i));
input_report_abs(input, ABS_RX, strip1);
input_report_abs(input, ABS_RY, strip2);
input_report_abs(input, ABS_WHEEL, (ring1 & 0x80) ? (ring1 & 0x7f) : 0);
input_report_abs(input, ABS_THROTTLE, (ring2 & 0x80) ? (ring2 & 0x7f) : 0);
input_report_key(input, wacom->tool[1], prox ? 1 : 0);
input_report_abs(input, ABS_MISC, prox ? PAD_DEVICE_ID : 0);
input_event(input, EV_MSC, MSC_SERIAL, 0xffffffff);
return 1;
}
static int wacom_intuos_id_mangle(int tool_id)
{
return (tool_id & ~0xFFF) << 4 | (tool_id & 0xFFF);
}
static int wacom_intuos_get_tool_type(int tool_id)
{
int tool_type;
switch (tool_id) {
case 0x812: /* Inking pen */
case 0x801: /* Intuos3 Inking pen */
case 0x12802: /* Intuos4/5 Inking Pen */
case 0x012:
tool_type = BTN_TOOL_PENCIL;
break;
case 0x822: /* Pen */
case 0x842:
case 0x852:
case 0x823: /* Intuos3 Grip Pen */
case 0x813: /* Intuos3 Classic Pen */
case 0x885: /* Intuos3 Marker Pen */
case 0x802: /* Intuos4/5 13HD/24HD General Pen */
case 0x804: /* Intuos4/5 13HD/24HD Marker Pen */
case 0x8e2: /* IntuosHT2 pen */
case 0x022:
case 0x10804: /* Intuos4/5 13HD/24HD Art Pen */
case 0x14802: /* Intuos4/5 13HD/24HD Classic Pen */
case 0x16802: /* Cintiq 13HD Pro Pen */
case 0x18802: /* DTH2242 Pen */
case 0x10802: /* Intuos4/5 13HD/24HD General Pen */
tool_type = BTN_TOOL_PEN;
break;
case 0x832: /* Stroke pen */
case 0x032:
tool_type = BTN_TOOL_BRUSH;
break;
case 0x007: /* Mouse 4D and 2D */
case 0x09c:
case 0x094:
case 0x017: /* Intuos3 2D Mouse */
case 0x806: /* Intuos4 Mouse */
tool_type = BTN_TOOL_MOUSE;
break;
case 0x096: /* Lens cursor */
case 0x097: /* Intuos3 Lens cursor */
case 0x006: /* Intuos4 Lens cursor */
tool_type = BTN_TOOL_LENS;
break;
case 0x82a: /* Eraser */
case 0x84a:
case 0x85a:
case 0x91a:
case 0xd1a:
case 0x0fa:
case 0x82b: /* Intuos3 Grip Pen Eraser */
case 0x81b: /* Intuos3 Classic Pen Eraser */
case 0x91b: /* Intuos3 Airbrush Eraser */
case 0x80c: /* Intuos4/5 13HD/24HD Marker Pen Eraser */
case 0x80a: /* Intuos4/5 13HD/24HD General Pen Eraser */
case 0x90a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
case 0x1480a: /* Intuos4/5 13HD/24HD Classic Pen Eraser */
case 0x1090a: /* Intuos4/5 13HD/24HD Airbrush Eraser */
case 0x1080c: /* Intuos4/5 13HD/24HD Art Pen Eraser */
case 0x1680a: /* Cintiq 13HD Pro Pen Eraser */
case 0x1880a: /* DTH2242 Eraser */
case 0x1080a: /* Intuos4/5 13HD/24HD General Pen Eraser */
tool_type = BTN_TOOL_RUBBER;
break;
case 0xd12:
case 0x912:
case 0x112:
case 0x913: /* Intuos3 Airbrush */
case 0x902: /* Intuos4/5 13HD/24HD Airbrush */
case 0x10902: /* Intuos4/5 13HD/24HD Airbrush */
tool_type = BTN_TOOL_AIRBRUSH;
break;
default: /* Unknown tool */
tool_type = BTN_TOOL_PEN;
break;
}
return tool_type;
}
static int wacom_intuos_inout(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
if (!(((data[1] & 0xfc) == 0xc0) || /* in prox */
((data[1] & 0xfe) == 0x20) || /* in range */
((data[1] & 0xfe) == 0x80))) /* out prox */
return 0;
/* Enter report */
if ((data[1] & 0xfc) == 0xc0) {
/* serial number of the tool */
wacom->serial[idx] = ((data[3] & 0x0f) << 28) +
(data[4] << 20) + (data[5] << 12) +
(data[6] << 4) + (data[7] >> 4);
wacom->id[idx] = (data[2] << 4) | (data[3] >> 4) |
((data[7] & 0x0f) << 16) | ((data[8] & 0xf0) << 8);
wacom->tool[idx] = wacom_intuos_get_tool_type(wacom->id[idx]);
wacom->shared->stylus_in_proximity = true;
return 1;
}
/* in Range */
if ((data[1] & 0xfe) == 0x20) {
if (features->type != INTUOSHT2)
wacom->shared->stylus_in_proximity = true;
/* in Range while exiting */
if (wacom->reporting_data) {
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_PRESSURE, 0);
input_report_abs(input, ABS_DISTANCE, wacom->features.distance_max);
return 2;
}
return 1;
}
/* Exit report */
if ((data[1] & 0xfe) == 0x80) {
wacom->shared->stylus_in_proximity = false;
wacom->reporting_data = false;
/* don't report exit if we don't know the ID */
if (!wacom->id[idx])
return 1;
/*
* Reset all states otherwise we lose the initial states
* when in-prox next time
*/
input_report_abs(input, ABS_X, 0);
input_report_abs(input, ABS_Y, 0);
input_report_abs(input, ABS_DISTANCE, 0);
input_report_abs(input, ABS_TILT_X, 0);
input_report_abs(input, ABS_TILT_Y, 0);
if (wacom->tool[idx] >= BTN_TOOL_MOUSE) {
input_report_key(input, BTN_LEFT, 0);
input_report_key(input, BTN_MIDDLE, 0);
input_report_key(input, BTN_RIGHT, 0);
input_report_key(input, BTN_SIDE, 0);
input_report_key(input, BTN_EXTRA, 0);
input_report_abs(input, ABS_THROTTLE, 0);
input_report_abs(input, ABS_RZ, 0);
} else {
input_report_abs(input, ABS_PRESSURE, 0);
input_report_key(input, BTN_STYLUS, 0);
input_report_key(input, BTN_STYLUS2, 0);
input_report_key(input, BTN_TOUCH, 0);
input_report_abs(input, ABS_WHEEL, 0);
if (features->type >= INTUOS3S)
input_report_abs(input, ABS_Z, 0);
}
input_report_key(input, wacom->tool[idx], 0);
input_report_abs(input, ABS_MISC, 0); /* reset tool id */
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
wacom->id[idx] = 0;
return 2;
}
return 0;
}
static inline bool report_touch_events(struct wacom_wac *wacom)
{
return (touch_arbitration ? !wacom->shared->stylus_in_proximity : 1);
}
static inline bool delay_pen_events(struct wacom_wac *wacom)
{
return (wacom->shared->touch_down && touch_arbitration);
}
static int wacom_intuos_general(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int idx = (features->type == INTUOS) ? (data[1] & 0x01) : 0;
unsigned char type = (data[1] >> 1) & 0x0F;
unsigned int x, y, distance, t;
if (data[0] != WACOM_REPORT_PENABLED && data[0] != WACOM_REPORT_CINTIQ &&
data[0] != WACOM_REPORT_INTUOS_PEN)
return 0;
if (delay_pen_events(wacom))
return 1;
/* don't report events if we don't know the tool ID */
if (!wacom->id[idx]) {
/* but reschedule a read of the current tool */
wacom_intuos_schedule_prox_event(wacom);
return 1;
}
/*
* don't report events for invalid data
*/
/* older I4 styli don't work with new Cintiqs */
if ((!((wacom->id[idx] >> 16) & 0x01) &&
(features->type == WACOM_21UX2)) ||
/* Only large Intuos support Lense Cursor */
(wacom->tool[idx] == BTN_TOOL_LENS &&
(features->type == INTUOS3 ||
features->type == INTUOS3S ||
features->type == INTUOS4 ||
features->type == INTUOS4S ||
features->type == INTUOS5 ||
features->type == INTUOS5S ||
features->type == INTUOSPM ||
features->type == INTUOSPS)) ||
/* Cintiq doesn't send data when RDY bit isn't set */
(features->type == CINTIQ && !(data[1] & 0x40)))
return 1;
x = (be16_to_cpup((__be16 *)&data[2]) << 1) | ((data[9] >> 1) & 1);
y = (be16_to_cpup((__be16 *)&data[4]) << 1) | (data[9] & 1);
distance = data[9] >> 2;
if (features->type < INTUOS3S) {
x >>= 1;
y >>= 1;
distance >>= 1;
}
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_DISTANCE, distance);
switch (type) {
case 0x00:
case 0x01:
case 0x02:
case 0x03:
/* general pen packet */
t = (data[6] << 3) | ((data[7] & 0xC0) >> 5) | (data[1] & 1);
if (features->pressure_max < 2047)
t >>= 1;
input_report_abs(input, ABS_PRESSURE, t);
if (features->type != INTUOSHT2) {
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
}
input_report_key(input, BTN_STYLUS, data[1] & 2);
input_report_key(input, BTN_STYLUS2, data[1] & 4);
input_report_key(input, BTN_TOUCH, t > 10);
break;
case 0x0a:
/* airbrush second packet */
input_report_abs(input, ABS_WHEEL,
(data[6] << 2) | ((data[7] >> 6) & 3));
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
break;
case 0x05:
/* Rotation packet */
if (features->type >= INTUOS3S) {
/* I3 marker pen rotation */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
t = (data[7] & 0x20) ? ((t > 900) ? ((t-1) / 2 - 1350) :
((t-1) / 2 + 450)) : (450 - t / 2) ;
input_report_abs(input, ABS_Z, t);
} else {
/* 4D mouse 2nd packet */
t = (data[6] << 3) | ((data[7] >> 5) & 7);
input_report_abs(input, ABS_RZ, (data[7] & 0x20) ?
((t - 1) / 2) : -t / 2);
}
break;
case 0x04:
/* 4D mouse 1st packet */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
input_report_key(input, BTN_SIDE, data[8] & 0x20);
input_report_key(input, BTN_EXTRA, data[8] & 0x10);
t = (data[6] << 2) | ((data[7] >> 6) & 3);
input_report_abs(input, ABS_THROTTLE, (data[8] & 0x08) ? -t : t);
break;
case 0x06:
/* I4 mouse */
input_report_key(input, BTN_LEFT, data[6] & 0x01);
input_report_key(input, BTN_MIDDLE, data[6] & 0x02);
input_report_key(input, BTN_RIGHT, data[6] & 0x04);
input_report_rel(input, REL_WHEEL, ((data[7] & 0x80) >> 7)
- ((data[7] & 0x40) >> 6));
input_report_key(input, BTN_SIDE, data[6] & 0x08);
input_report_key(input, BTN_EXTRA, data[6] & 0x10);
input_report_abs(input, ABS_TILT_X,
(((data[7] << 1) & 0x7e) | (data[8] >> 7)) - 64);
input_report_abs(input, ABS_TILT_Y, (data[8] & 0x7f) - 64);
break;
case 0x08:
if (wacom->tool[idx] == BTN_TOOL_MOUSE) {
/* 2D mouse packet */
input_report_key(input, BTN_LEFT, data[8] & 0x04);
input_report_key(input, BTN_MIDDLE, data[8] & 0x08);
input_report_key(input, BTN_RIGHT, data[8] & 0x10);
input_report_rel(input, REL_WHEEL, (data[8] & 0x01)
- ((data[8] & 0x02) >> 1));
/* I3 2D mouse side buttons */
if (features->type >= INTUOS3S && features->type <= INTUOS3L) {
input_report_key(input, BTN_SIDE, data[8] & 0x40);
input_report_key(input, BTN_EXTRA, data[8] & 0x20);
}
}
else if (wacom->tool[idx] == BTN_TOOL_LENS) {
/* Lens cursor packets */
input_report_key(input, BTN_LEFT, data[8] & 0x01);
input_report_key(input, BTN_MIDDLE, data[8] & 0x02);
input_report_key(input, BTN_RIGHT, data[8] & 0x04);
input_report_key(input, BTN_SIDE, data[8] & 0x10);
input_report_key(input, BTN_EXTRA, data[8] & 0x08);
}
break;
case 0x07:
case 0x09:
case 0x0b:
case 0x0c:
case 0x0d:
case 0x0e:
case 0x0f:
/* unhandled */
break;
}
input_report_abs(input, ABS_MISC,
wacom_intuos_id_mangle(wacom->id[idx])); /* report tool id */
input_report_key(input, wacom->tool[idx], 1);
input_event(input, EV_MSC, MSC_SERIAL, wacom->serial[idx]);
wacom->reporting_data = true;
return 2;
}
static int wacom_intuos_irq(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
int result;
if (data[0] != WACOM_REPORT_PENABLED &&
data[0] != WACOM_REPORT_INTUOS_ID1 &&
data[0] != WACOM_REPORT_INTUOS_ID2 &&
data[0] != WACOM_REPORT_INTUOSPAD &&
data[0] != WACOM_REPORT_INTUOS_PEN &&
data[0] != WACOM_REPORT_CINTIQ &&
data[0] != WACOM_REPORT_CINTIQPAD &&
data[0] != WACOM_REPORT_INTUOS5PAD) {
dev_dbg(input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
/* process pad events */
result = wacom_intuos_pad(wacom);
if (result)
return result;
/* process in/out prox events */
result = wacom_intuos_inout(wacom);
if (result)
return result - 1;
/* process general packets */
result = wacom_intuos_general(wacom);
if (result)
return result - 1;
return 0;
}
static int wacom_remote_irq(struct wacom_wac *wacom_wac, size_t len)
{
unsigned char *data = wacom_wac->data;
struct input_dev *input;
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_remote *remote = wacom->remote;
int bat_charging, bat_percent, touch_ring_mode;
__u32 serial;
int i, index = -1;
unsigned long flags;
if (data[0] != WACOM_REPORT_REMOTE) {
hid_dbg(wacom->hdev, "%s: received unknown report #%d",
__func__, data[0]);
return 0;
}
serial = data[3] + (data[4] << 8) + (data[5] << 16);
wacom_wac->id[0] = PAD_DEVICE_ID;
spin_lock_irqsave(&remote->remote_lock, flags);
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
if (remote->remotes[i].serial == serial) {
index = i;
break;
}
}
if (index < 0 || !remote->remotes[index].registered)
goto out;
input = remote->remotes[index].input;
input_report_key(input, BTN_0, (data[9] & 0x01));
input_report_key(input, BTN_1, (data[9] & 0x02));
input_report_key(input, BTN_2, (data[9] & 0x04));
input_report_key(input, BTN_3, (data[9] & 0x08));
input_report_key(input, BTN_4, (data[9] & 0x10));
input_report_key(input, BTN_5, (data[9] & 0x20));
input_report_key(input, BTN_6, (data[9] & 0x40));
input_report_key(input, BTN_7, (data[9] & 0x80));
input_report_key(input, BTN_8, (data[10] & 0x01));
input_report_key(input, BTN_9, (data[10] & 0x02));
input_report_key(input, BTN_A, (data[10] & 0x04));
input_report_key(input, BTN_B, (data[10] & 0x08));
input_report_key(input, BTN_C, (data[10] & 0x10));
input_report_key(input, BTN_X, (data[10] & 0x20));
input_report_key(input, BTN_Y, (data[10] & 0x40));
input_report_key(input, BTN_Z, (data[10] & 0x80));
input_report_key(input, BTN_BASE, (data[11] & 0x01));
input_report_key(input, BTN_BASE2, (data[11] & 0x02));
if (data[12] & 0x80)
input_report_abs(input, ABS_WHEEL, (data[12] & 0x7f));
else
input_report_abs(input, ABS_WHEEL, 0);
bat_percent = data[7] & 0x7f;
bat_charging = !!(data[7] & 0x80);
if (data[9] | data[10] | (data[11] & 0x03) | data[12])
input_report_abs(input, ABS_MISC, PAD_DEVICE_ID);
else
input_report_abs(input, ABS_MISC, 0);
input_event(input, EV_MSC, MSC_SERIAL, serial);
input_sync(input);
/*Which mode select (LED light) is currently on?*/
touch_ring_mode = (data[11] & 0xC0) >> 6;
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
if (remote->remotes[i].serial == serial)
wacom->led.groups[i].select = touch_ring_mode;
}
__wacom_notify_battery(&remote->remotes[index].battery,
WACOM_POWER_SUPPLY_STATUS_AUTO, bat_percent,
bat_charging, 1, bat_charging);
out:
spin_unlock_irqrestore(&remote->remote_lock, flags);
return 0;
}
static void wacom_remote_status_irq(struct wacom_wac *wacom_wac, size_t len)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
unsigned char *data = wacom_wac->data;
struct wacom_remote *remote = wacom->remote;
struct wacom_remote_data remote_data;
unsigned long flags;
int i, ret;
if (data[0] != WACOM_REPORT_DEVICE_LIST)
return;
memset(&remote_data, 0, sizeof(struct wacom_remote_data));
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
int j = i * 6;
int serial = (data[j+6] << 16) + (data[j+5] << 8) + data[j+4];
bool connected = data[j+2];
remote_data.remote[i].serial = serial;
remote_data.remote[i].connected = connected;
}
spin_lock_irqsave(&remote->remote_lock, flags);
ret = kfifo_in(&remote->remote_fifo, &remote_data, sizeof(remote_data));
if (ret != sizeof(remote_data)) {
spin_unlock_irqrestore(&remote->remote_lock, flags);
hid_err(wacom->hdev, "Can't queue Remote status event.\n");
return;
}
spin_unlock_irqrestore(&remote->remote_lock, flags);
wacom_schedule_work(wacom_wac, WACOM_WORKER_REMOTE);
}
static int int_dist(int x1, int y1, int x2, int y2)
{
int x = x2 - x1;
int y = y2 - y1;
return int_sqrt(x*x + y*y);
}
static void wacom_intuos_bt_process_data(struct wacom_wac *wacom,
unsigned char *data)
{
memcpy(wacom->data, data, 10);
wacom_intuos_irq(wacom);
input_sync(wacom->pen_input);
if (wacom->pad_input)
input_sync(wacom->pad_input);
}
static int wacom_intuos_bt_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char data[WACOM_PKGLEN_MAX];
int i = 1;
unsigned power_raw, battery_capacity, bat_charging, ps_connected;
memcpy(data, wacom->data, len);
switch (data[0]) {
case 0x04:
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
/* fall through */
case 0x03:
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
wacom_intuos_bt_process_data(wacom, data + i);
i += 10;
power_raw = data[i];
bat_charging = (power_raw & 0x08) ? 1 : 0;
ps_connected = (power_raw & 0x10) ? 1 : 0;
battery_capacity = batcap_i4[power_raw & 0x07];
wacom_notify_battery(wacom, WACOM_POWER_SUPPLY_STATUS_AUTO,
battery_capacity, bat_charging,
battery_capacity || bat_charging,
ps_connected);
break;
default:
dev_dbg(wacom->pen_input->dev.parent,
"Unknown report: %d,%d size:%zu\n",
data[0], data[1], len);
return 0;
}
return 0;
}
static int wacom_wac_finger_count_touches(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned touch_max = wacom->features.touch_max;
int count = 0;
int i;
if (!touch_max)
return 0;
if (touch_max == 1)
return test_bit(BTN_TOUCH, input->key) &&
report_touch_events(wacom);
for (i = 0; i < input->mt->num_slots; i++) {
struct input_mt_slot *ps = &input->mt->slots[i];
int id = input_mt_get_value(ps, ABS_MT_TRACKING_ID);
if (id >= 0)
count++;
}
return count;
}
static void wacom_intuos_pro2_bt_pen(struct wacom_wac *wacom)
{
const int pen_frame_len = 14;
const int pen_frames = 7;
struct input_dev *pen_input = wacom->pen_input;
unsigned char *data = wacom->data;
int i;
wacom->serial[0] = get_unaligned_le64(&data[99]);
wacom->id[0] = get_unaligned_le16(&data[107]);
if (wacom->serial[0] >> 52 == 1) {
/* Add back in missing bits of ID for non-USI pens */
wacom->id[0] |= (wacom->serial[0] >> 32) & 0xFFFFF;
}
wacom->tool[0] = wacom_intuos_get_tool_type(wacom_intuos_id_mangle(wacom->id[0]));
for (i = 0; i < pen_frames; i++) {
unsigned char *frame = &data[i*pen_frame_len + 1];
bool valid = frame[0] & 0x80;
bool prox = frame[0] & 0x40;
bool range = frame[0] & 0x20;
if (!valid)
continue;
if (range) {
/* Fix rotation alignment: userspace expects zero at left */
int16_t rotation = (int16_t)get_unaligned_le16(&frame[9]);
rotation += 1800/4;
if (rotation > 899)
rotation -= 1800;
input_report_abs(pen_input, ABS_X, get_unaligned_le16(&frame[1]));
input_report_abs(pen_input, ABS_Y, get_unaligned_le16(&frame[3]));
input_report_abs(pen_input, ABS_TILT_X, (char)frame[7]);
input_report_abs(pen_input, ABS_TILT_Y, (char)frame[8]);
input_report_abs(pen_input, ABS_Z, rotation);
input_report_abs(pen_input, ABS_WHEEL, get_unaligned_le16(&frame[11]));
}
input_report_abs(pen_input, ABS_PRESSURE, get_unaligned_le16(&frame[5]));
input_report_abs(pen_input, ABS_DISTANCE, range ? frame[13] : wacom->features.distance_max);
input_report_key(pen_input, BTN_TOUCH, frame[0] & 0x01);
input_report_key(pen_input, BTN_STYLUS, frame[0] & 0x02);
input_report_key(pen_input, BTN_STYLUS2, frame[0] & 0x04);
input_report_key(pen_input, wacom->tool[0], prox);
input_event(pen_input, EV_MSC, MSC_SERIAL, wacom->serial[0]);
input_report_abs(pen_input, ABS_MISC,
wacom_intuos_id_mangle(wacom->id[0])); /* report tool id */
wacom->shared->stylus_in_proximity = prox;
input_sync(pen_input);
}
}
static void wacom_intuos_pro2_bt_touch(struct wacom_wac *wacom)
{
const int finger_touch_len = 8;
const int finger_frames = 4;
const int finger_frame_len = 43;
struct input_dev *touch_input = wacom->touch_input;
unsigned char *data = wacom->data;
int num_contacts_left = 5;
int i, j;
for (i = 0; i < finger_frames; i++) {
unsigned char *frame = &data[i*finger_frame_len + 109];
int current_num_contacts = frame[0] & 0x7F;
int contacts_to_send;
if (!(frame[0] & 0x80))
continue;
/*
* First packet resets the counter since only the first
* packet in series will have non-zero current_num_contacts.
*/
if (current_num_contacts)
wacom->num_contacts_left = current_num_contacts;
contacts_to_send = min(num_contacts_left, wacom->num_contacts_left);
for (j = 0; j < contacts_to_send; j++) {
unsigned char *touch = &frame[j*finger_touch_len + 1];
int slot = input_mt_get_slot_by_key(touch_input, touch[0]);
int x = get_unaligned_le16(&touch[2]);
int y = get_unaligned_le16(&touch[4]);
int w = touch[6] * input_abs_get_res(touch_input, ABS_MT_POSITION_X);
int h = touch[7] * input_abs_get_res(touch_input, ABS_MT_POSITION_Y);
if (slot < 0)
continue;
input_mt_slot(touch_input, slot);
input_mt_report_slot_state(touch_input, MT_TOOL_FINGER, touch[1] & 0x01);
input_report_abs(touch_input, ABS_MT_POSITION_X, x);
input_report_abs(touch_input, ABS_MT_POSITION_Y, y);
input_report_abs(touch_input, ABS_MT_TOUCH_MAJOR, max(w, h));
input_report_abs(touch_input, ABS_MT_TOUCH_MINOR, min(w, h));
input_report_abs(touch_input, ABS_MT_ORIENTATION, w > h);
}
input_mt_sync_frame(touch_input);
wacom->num_contacts_left -= contacts_to_send;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
}
input_report_switch(touch_input, SW_MUTE_DEVICE, !(data[281] >> 7));
input_sync(touch_input);
}
static void wacom_intuos_pro2_bt_pad(struct wacom_wac *wacom)
{
struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
int buttons = (data[282] << 1) | ((data[281] >> 6) & 0x01);
int ring = data[285] & 0x7F;
bool ringstatus = data[285] & 0x80;
bool prox = buttons || ringstatus;
/* Fix touchring data: userspace expects 0 at left and increasing clockwise */
ring = 71 - ring;
ring += 3*72/16;
if (ring > 71)
ring -= 72;
wacom_report_numbered_buttons(pad_input, 9, buttons);
input_report_abs(pad_input, ABS_WHEEL, ringstatus ? ring : 0);
input_report_key(pad_input, wacom->tool[1], prox ? 1 : 0);
input_report_abs(pad_input, ABS_MISC, prox ? PAD_DEVICE_ID : 0);
input_event(pad_input, EV_MSC, MSC_SERIAL, 0xffffffff);
input_sync(pad_input);
}
static void wacom_intuos_pro2_bt_battery(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
bool chg = data[284] & 0x80;
int battery_status = data[284] & 0x7F;
wacom_notify_battery(wacom, WACOM_POWER_SUPPLY_STATUS_AUTO,
battery_status, chg, 1, chg);
}
static int wacom_intuos_pro2_bt_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
if (data[0] != 0x80) {
dev_dbg(wacom->pen_input->dev.parent,
"%s: received unknown report #%d\n", __func__, data[0]);
return 0;
}
wacom_intuos_pro2_bt_pen(wacom);
wacom_intuos_pro2_bt_touch(wacom);
wacom_intuos_pro2_bt_pad(wacom);
wacom_intuos_pro2_bt_battery(wacom);
return 0;
}
static int wacom_24hdt_irq(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[61];
int contacts_to_send = 0;
int num_contacts_left = 4; /* maximum contacts per packet */
int byte_per_packet = WACOM_BYTES_PER_24HDT_PACKET;
int y_offset = 2;
if (wacom->features.type == WACOM_27QHDT) {
current_num_contacts = data[63];
num_contacts_left = 10;
byte_per_packet = WACOM_BYTES_PER_QHDTHID_PACKET;
y_offset = 0;
}
/*
* First packet resets the counter since only the first
* packet in series will have non-zero current_num_contacts.
*/
if (current_num_contacts)
wacom->num_contacts_left = current_num_contacts;
contacts_to_send = min(num_contacts_left, wacom->num_contacts_left);
for (i = 0; i < contacts_to_send; i++) {
int offset = (byte_per_packet * i) + 1;
bool touch = (data[offset] & 0x1) && report_touch_events(wacom);
int slot = input_mt_get_slot_by_key(input, data[offset + 1]);
if (slot < 0)
continue;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int t_x = get_unaligned_le16(&data[offset + 2]);
int t_y = get_unaligned_le16(&data[offset + 4 + y_offset]);
input_report_abs(input, ABS_MT_POSITION_X, t_x);
input_report_abs(input, ABS_MT_POSITION_Y, t_y);
if (wacom->features.type != WACOM_27QHDT) {
int c_x = get_unaligned_le16(&data[offset + 4]);
int c_y = get_unaligned_le16(&data[offset + 8]);
int w = get_unaligned_le16(&data[offset + 10]);
int h = get_unaligned_le16(&data[offset + 12]);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, min(w,h));
input_report_abs(input, ABS_MT_WIDTH_MAJOR,
min(w, h) + int_dist(t_x, t_y, c_x, c_y));
input_report_abs(input, ABS_MT_WIDTH_MINOR, min(w, h));
input_report_abs(input, ABS_MT_ORIENTATION, w > h);
}
}
}
input_mt_sync_frame(input);
wacom->num_contacts_left -= contacts_to_send;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
int current_num_contacts = data[2];
int contacts_to_send = 0;
int x_offset = 0;
/* MTTPC does not support Height and Width */
if (wacom->features.type == MTTPC || wacom->features.type == MTTPC_B)
x_offset = -4;
/*
* First packet resets the counter since only the first
* packet in series will have non-zero current_num_contacts.
*/
if (current_num_contacts)
wacom->num_contacts_left = current_num_contacts;
/* There are at most 5 contacts per packet */
contacts_to_send = min(5, wacom->num_contacts_left);
for (i = 0; i < contacts_to_send; i++) {
int offset = (WACOM_BYTES_PER_MT_PACKET + x_offset) * i + 3;
bool touch = (data[offset] & 0x1) && report_touch_events(wacom);
int id = get_unaligned_le16(&data[offset + 1]);
int slot = input_mt_get_slot_by_key(input, id);
if (slot < 0)
continue;
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = get_unaligned_le16(&data[offset + x_offset + 7]);
int y = get_unaligned_le16(&data[offset + x_offset + 9]);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
wacom->num_contacts_left -= contacts_to_send;
if (wacom->num_contacts_left <= 0) {
wacom->num_contacts_left = 0;
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_tpc_mt_touch(struct wacom_wac *wacom)
{
struct input_dev *input = wacom->touch_input;
unsigned char *data = wacom->data;
int i;
for (i = 0; i < 2; i++) {
int p = data[1] & (1 << i);
bool touch = p && report_touch_events(wacom);
input_mt_slot(input, i);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = le16_to_cpup((__le16 *)&data[i * 2 + 2]) & 0x7fff;
int y = le16_to_cpup((__le16 *)&data[i * 2 + 6]) & 0x7fff;
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
/* keep touch state for pen event */
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
return 1;
}
static int wacom_tpc_single_touch(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->touch_input;
bool prox = report_touch_events(wacom);
int x = 0, y = 0;
if (wacom->features.touch_max > 1 || len > WACOM_PKGLEN_TPC2FG)
return 0;
if (len == WACOM_PKGLEN_TPC1FG) {
prox = prox && (data[0] & 0x01);
x = get_unaligned_le16(&data[1]);
y = get_unaligned_le16(&data[3]);
} else if (len == WACOM_PKGLEN_TPC1FG_B) {
prox = prox && (data[2] & 0x01);
x = get_unaligned_le16(&data[3]);
y = get_unaligned_le16(&data[5]);
} else {
prox = prox && (data[1] & 0x01);
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
}
if (prox) {
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
}
input_report_key(input, BTN_TOUCH, prox);
/* keep touch state for pen events */
wacom->shared->touch_down = prox;
return 1;
}
static int wacom_tpc_pen(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
struct input_dev *input = wacom->pen_input;
bool prox = data[1] & 0x20;
if (!wacom->shared->stylus_in_proximity) /* first in prox */
/* Going into proximity select tool */
wacom->tool[0] = (data[1] & 0x0c) ? BTN_TOOL_RUBBER : BTN_TOOL_PEN;
/* keep pen state for touch events */
wacom->shared->stylus_in_proximity = prox;
/* send pen events only when touch is up or forced out
* or touch arbitration is off
*/
if (!delay_pen_events(wacom)) {
input_report_key(input, BTN_STYLUS, data[1] & 0x02);
input_report_key(input, BTN_STYLUS2, data[1] & 0x10);
input_report_abs(input, ABS_X, le16_to_cpup((__le16 *)&data[2]));
input_report_abs(input, ABS_Y, le16_to_cpup((__le16 *)&data[4]));
input_report_abs(input, ABS_PRESSURE, ((data[7] & 0x07) << 8) | data[6]);
input_report_key(input, BTN_TOUCH, data[1] & 0x05);
input_report_key(input, wacom->tool[0], prox);
return 1;
}
return 0;
}
static int wacom_tpc_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
if (wacom->pen_input) {
dev_dbg(wacom->pen_input->dev.parent,
"%s: received report #%d\n", __func__, data[0]);
if (len == WACOM_PKGLEN_PENABLED ||
data[0] == WACOM_REPORT_PENABLED)
return wacom_tpc_pen(wacom);
}
else if (wacom->touch_input) {
dev_dbg(wacom->touch_input->dev.parent,
"%s: received report #%d\n", __func__, data[0]);
switch (len) {
case WACOM_PKGLEN_TPC1FG:
return wacom_tpc_single_touch(wacom, len);
case WACOM_PKGLEN_TPC2FG:
return wacom_tpc_mt_touch(wacom);
default:
switch (data[0]) {
case WACOM_REPORT_TPC1FG:
case WACOM_REPORT_TPCHID:
case WACOM_REPORT_TPCST:
case WACOM_REPORT_TPC1FGE:
return wacom_tpc_single_touch(wacom, len);
case WACOM_REPORT_TPCMT:
case WACOM_REPORT_TPCMT2:
return wacom_mt_touch(wacom);
}
}
}
return 0;
}
static int wacom_offset_rotation(struct input_dev *input, struct hid_usage *usage,
int value, int num, int denom)
{
struct input_absinfo *abs = &input->absinfo[usage->code];
int range = (abs->maximum - abs->minimum + 1);
value += num*range/denom;
if (value > abs->maximum)
value -= range;
else if (value < abs->minimum)
value += range;
return value;
}
int wacom_equivalent_usage(int usage)
{
if ((usage & HID_USAGE_PAGE) == WACOM_HID_UP_WACOMDIGITIZER) {
int subpage = (usage & 0xFF00) << 8;
int subusage = (usage & 0xFF);
if (subpage == WACOM_HID_SP_PAD ||
subpage == WACOM_HID_SP_BUTTON ||
subpage == WACOM_HID_SP_DIGITIZER ||
subpage == WACOM_HID_SP_DIGITIZERINFO ||
usage == WACOM_HID_WD_SENSE ||
usage == WACOM_HID_WD_SERIALHI ||
usage == WACOM_HID_WD_TOOLTYPE ||
usage == WACOM_HID_WD_DISTANCE ||
usage == WACOM_HID_WD_TOUCHSTRIP ||
usage == WACOM_HID_WD_TOUCHSTRIP2 ||
usage == WACOM_HID_WD_TOUCHRING ||
usage == WACOM_HID_WD_TOUCHRINGSTATUS) {
return usage;
}
if (subpage == HID_UP_UNDEFINED)
subpage = HID_UP_DIGITIZER;
return subpage | subusage;
}
if ((usage & HID_USAGE_PAGE) == WACOM_HID_UP_WACOMTOUCH) {
int subpage = (usage & 0xFF00) << 8;
int subusage = (usage & 0xFF);
if (subpage == HID_UP_UNDEFINED)
subpage = WACOM_HID_SP_DIGITIZER;
return subpage | subusage;
}
return usage;
}
static void wacom_map_usage(struct input_dev *input, struct hid_usage *usage,
struct hid_field *field, __u8 type, __u16 code, int fuzz)
{
struct wacom *wacom = input_get_drvdata(input);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
int fmin = field->logical_minimum;
int fmax = field->logical_maximum;
unsigned int equivalent_usage = wacom_equivalent_usage(usage->hid);
int resolution_code = code;
if (equivalent_usage == HID_DG_TWIST) {
resolution_code = ABS_RZ;
}
if (equivalent_usage == HID_GD_X) {
fmin += features->offset_left;
fmax -= features->offset_right;
}
if (equivalent_usage == HID_GD_Y) {
fmin += features->offset_top;
fmax -= features->offset_bottom;
}
usage->type = type;
usage->code = code;
set_bit(type, input->evbit);
switch (type) {
case EV_ABS:
input_set_abs_params(input, code, fmin, fmax, fuzz, 0);
input_abs_set_res(input, code,
hidinput_calc_abs_res(field, resolution_code));
break;
case EV_KEY:
input_set_capability(input, EV_KEY, code);
break;
case EV_MSC:
input_set_capability(input, EV_MSC, code);
break;
case EV_SW:
input_set_capability(input, EV_SW, code);
break;
}
}
static void wacom_wac_battery_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_DG_BATTERYSTRENGTH:
case WACOM_HID_WD_BATTERY_LEVEL:
case WACOM_HID_WD_BATTERY_CHARGING:
features->quirks |= WACOM_QUIRK_BATTERY;
break;
}
}
static void wacom_wac_battery_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_DG_BATTERYSTRENGTH:
if (value == 0) {
wacom_wac->hid_data.bat_status = POWER_SUPPLY_STATUS_UNKNOWN;
}
else {
value = value * 100 / (field->logical_maximum - field->logical_minimum);
wacom_wac->hid_data.battery_capacity = value;
wacom_wac->hid_data.bat_connected = 1;
wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO;
}
break;
case WACOM_HID_WD_BATTERY_LEVEL:
value = value * 100 / (field->logical_maximum - field->logical_minimum);
wacom_wac->hid_data.battery_capacity = value;
wacom_wac->hid_data.bat_connected = 1;
wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO;
break;
case WACOM_HID_WD_BATTERY_CHARGING:
wacom_wac->hid_data.bat_charging = value;
wacom_wac->hid_data.ps_connected = value;
wacom_wac->hid_data.bat_connected = 1;
wacom_wac->hid_data.bat_status = WACOM_POWER_SUPPLY_STATUS_AUTO;
break;
}
}
static void wacom_wac_battery_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
return;
}
static void wacom_wac_battery_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
if (features->quirks & WACOM_QUIRK_BATTERY) {
int status = wacom_wac->hid_data.bat_status;
int capacity = wacom_wac->hid_data.battery_capacity;
bool charging = wacom_wac->hid_data.bat_charging;
bool connected = wacom_wac->hid_data.bat_connected;
bool powered = wacom_wac->hid_data.ps_connected;
wacom_notify_battery(wacom_wac, status, capacity, charging,
connected, powered);
}
}
static void wacom_wac_pad_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
struct input_dev *input = wacom_wac->pad_input;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case WACOM_HID_WD_ACCELEROMETER_X:
__set_bit(INPUT_PROP_ACCELEROMETER, input->propbit);
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_ACCELEROMETER_Y:
__set_bit(INPUT_PROP_ACCELEROMETER, input->propbit);
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_ACCELEROMETER_Z:
__set_bit(INPUT_PROP_ACCELEROMETER, input->propbit);
wacom_map_usage(input, usage, field, EV_ABS, ABS_Z, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_BUTTONCENTER:
wacom->generic_has_leds = true;
/* fall through */
case WACOM_HID_WD_BUTTONHOME:
case WACOM_HID_WD_BUTTONUP:
case WACOM_HID_WD_BUTTONDOWN:
case WACOM_HID_WD_BUTTONLEFT:
case WACOM_HID_WD_BUTTONRIGHT:
wacom_map_usage(input, usage, field, EV_KEY,
wacom_numbered_button_to_key(features->numbered_buttons),
0);
features->numbered_buttons++;
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_TOUCHONOFF:
case WACOM_HID_WD_MUTE_DEVICE:
/*
* This usage, which is used to mute touch events, comes
* from the pad packet, but is reported on the touch
* interface. Because the touch interface may not have
* been created yet, we cannot call wacom_map_usage(). In
* order to process this usage when we receive it, we set
* the usage type and code directly.
*/
wacom_wac->has_mute_touch_switch = true;
usage->type = EV_SW;
usage->code = SW_MUTE_DEVICE;
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_TOUCHSTRIP:
wacom_map_usage(input, usage, field, EV_ABS, ABS_RX, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_TOUCHSTRIP2:
wacom_map_usage(input, usage, field, EV_ABS, ABS_RY, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_TOUCHRING:
wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_TOUCHRINGSTATUS:
/*
* Only set up type/code association. Completely mapping
* this usage may overwrite the axis resolution and range.
*/
usage->type = EV_ABS;
usage->code = ABS_WHEEL;
set_bit(EV_ABS, input->evbit);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_BUTTONCONFIG:
wacom_map_usage(input, usage, field, EV_KEY, KEY_BUTTONCONFIG, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_ONSCREEN_KEYBOARD:
wacom_map_usage(input, usage, field, EV_KEY, KEY_ONSCREEN_KEYBOARD, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_CONTROLPANEL:
wacom_map_usage(input, usage, field, EV_KEY, KEY_CONTROLPANEL, 0);
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
case WACOM_HID_WD_MODE_CHANGE:
/* do not overwrite previous data */
if (!wacom_wac->has_mode_change) {
wacom_wac->has_mode_change = true;
wacom_wac->is_direct_mode = true;
}
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
}
switch (equivalent_usage & 0xfffffff0) {
case WACOM_HID_WD_EXPRESSKEY00:
wacom_map_usage(input, usage, field, EV_KEY,
wacom_numbered_button_to_key(features->numbered_buttons),
0);
features->numbered_buttons++;
features->device_type |= WACOM_DEVICETYPE_PAD;
break;
}
}
static void wacom_wac_pad_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pad_input;
struct wacom_features *features = &wacom_wac->features;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
int i;
bool is_touch_on = value;
bool do_report = false;
/*
* Avoid reporting this event and setting inrange_state if this usage
* hasn't been mapped.
*/
if (!usage->type && equivalent_usage != WACOM_HID_WD_MODE_CHANGE)
return;
if (wacom_equivalent_usage(field->physical) == HID_DG_TABLETFUNCTIONKEY) {
if (usage->hid != WACOM_HID_WD_TOUCHRING)
wacom_wac->hid_data.inrange_state |= value;
}
switch (equivalent_usage) {
case WACOM_HID_WD_TOUCHRING:
/*
* Userspace expects touchrings to increase in value with
* clockwise gestures and have their zero point at the
* tablet's left. HID events "should" be clockwise-
* increasing and zero at top, though the MobileStudio
* Pro and 2nd-gen Intuos Pro don't do this...
*/
if (hdev->vendor == 0x56a &&
(hdev->product == 0x34d || hdev->product == 0x34e || /* MobileStudio Pro */
hdev->product == 0x357 || hdev->product == 0x358)) { /* Intuos Pro 2 */
value = (field->logical_maximum - value);
if (hdev->product == 0x357 || hdev->product == 0x358)
value = wacom_offset_rotation(input, usage, value, 3, 16);
else if (hdev->product == 0x34d || hdev->product == 0x34e)
value = wacom_offset_rotation(input, usage, value, 1, 2);
}
else {
value = wacom_offset_rotation(input, usage, value, 1, 4);
}
do_report = true;
break;
case WACOM_HID_WD_TOUCHRINGSTATUS:
if (!value)
input_event(input, usage->type, usage->code, 0);
break;
case WACOM_HID_WD_MUTE_DEVICE:
if (wacom_wac->shared->touch_input && value) {
wacom_wac->shared->is_touch_on = !wacom_wac->shared->is_touch_on;
is_touch_on = wacom_wac->shared->is_touch_on;
}
/* fall through*/
case WACOM_HID_WD_TOUCHONOFF:
if (wacom_wac->shared->touch_input) {
input_report_switch(wacom_wac->shared->touch_input,
SW_MUTE_DEVICE, !is_touch_on);
input_sync(wacom_wac->shared->touch_input);
}
break;
case WACOM_HID_WD_MODE_CHANGE:
if (wacom_wac->is_direct_mode != value) {
wacom_wac->is_direct_mode = value;
wacom_schedule_work(&wacom->wacom_wac, WACOM_WORKER_MODE_CHANGE);
}
break;
case WACOM_HID_WD_BUTTONCENTER:
for (i = 0; i < wacom->led.count; i++)
wacom_update_led(wacom, features->numbered_buttons,
value, i);
/* fall through*/
default:
do_report = true;
break;
}
if (do_report) {
input_event(input, usage->type, usage->code, value);
if (value)
wacom_wac->hid_data.pad_input_event_flag = true;
}
}
static void wacom_wac_pad_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
wacom_wac->hid_data.inrange_state = 0;
}
static void wacom_wac_pad_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pad_input;
bool active = wacom_wac->hid_data.inrange_state != 0;
/* report prox for expresskey events */
if ((wacom_equivalent_usage(report->field[0]->physical) == HID_DG_TABLETFUNCTIONKEY) &&
wacom_wac->hid_data.pad_input_event_flag) {
input_event(input, EV_ABS, ABS_MISC, active ? PAD_DEVICE_ID : 0);
input_sync(input);
if (!active)
wacom_wac->hid_data.pad_input_event_flag = false;
}
}
static void wacom_wac_pen_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
struct input_dev *input = wacom_wac->pen_input;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_GD_X:
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
break;
case HID_GD_Y:
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
break;
case WACOM_HID_WD_DISTANCE:
case HID_GD_Z:
wacom_map_usage(input, usage, field, EV_ABS, ABS_DISTANCE, 0);
break;
case HID_DG_TIPPRESSURE:
wacom_map_usage(input, usage, field, EV_ABS, ABS_PRESSURE, 0);
break;
case HID_DG_INRANGE:
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOOL_PEN, 0);
break;
case HID_DG_INVERT:
wacom_map_usage(input, usage, field, EV_KEY,
BTN_TOOL_RUBBER, 0);
break;
case HID_DG_TILT_X:
wacom_map_usage(input, usage, field, EV_ABS, ABS_TILT_X, 0);
break;
case HID_DG_TILT_Y:
wacom_map_usage(input, usage, field, EV_ABS, ABS_TILT_Y, 0);
break;
case HID_DG_TWIST:
wacom_map_usage(input, usage, field, EV_ABS, ABS_Z, 0);
break;
case HID_DG_ERASER:
case HID_DG_TIPSWITCH:
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
break;
case HID_DG_BARRELSWITCH:
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS, 0);
break;
case HID_DG_BARRELSWITCH2:
wacom_map_usage(input, usage, field, EV_KEY, BTN_STYLUS2, 0);
break;
case HID_DG_TOOLSERIALNUMBER:
wacom_map_usage(input, usage, field, EV_MSC, MSC_SERIAL, 0);
break;
case WACOM_HID_WD_SENSE:
features->quirks |= WACOM_QUIRK_SENSE;
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOOL_PEN, 0);
break;
case WACOM_HID_WD_SERIALHI:
wacom_map_usage(input, usage, field, EV_ABS, ABS_MISC, 0);
set_bit(EV_KEY, input->evbit);
input_set_capability(input, EV_KEY, BTN_TOOL_PEN);
input_set_capability(input, EV_KEY, BTN_TOOL_RUBBER);
input_set_capability(input, EV_KEY, BTN_TOOL_BRUSH);
input_set_capability(input, EV_KEY, BTN_TOOL_PENCIL);
input_set_capability(input, EV_KEY, BTN_TOOL_AIRBRUSH);
if (!(features->device_type & WACOM_DEVICETYPE_DIRECT)) {
input_set_capability(input, EV_KEY, BTN_TOOL_MOUSE);
input_set_capability(input, EV_KEY, BTN_TOOL_LENS);
}
break;
case WACOM_HID_WD_FINGERWHEEL:
wacom_map_usage(input, usage, field, EV_ABS, ABS_WHEEL, 0);
break;
}
}
static void wacom_wac_pen_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
struct input_dev *input = wacom_wac->pen_input;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_GD_Z:
/*
* HID_GD_Z "should increase as the control's position is
* moved from high to low", while ABS_DISTANCE instead
* increases in value as the tool moves from low to high.
*/
value = field->logical_maximum - value;
break;
case HID_DG_INRANGE:
wacom_wac->hid_data.inrange_state = value;
if (!(features->quirks & WACOM_QUIRK_SENSE))
wacom_wac->hid_data.sense_state = value;
return;
case HID_DG_INVERT:
wacom_wac->hid_data.invert_state = value;
return;
case HID_DG_ERASER:
case HID_DG_TIPSWITCH:
wacom_wac->hid_data.tipswitch |= value;
return;
case HID_DG_TOOLSERIALNUMBER:
if (value) {
wacom_wac->serial[0] = (wacom_wac->serial[0] & ~0xFFFFFFFFULL);
wacom_wac->serial[0] |= (__u32)value;
}
return;
case HID_DG_TWIST:
/*
* Userspace expects pen twist to have its zero point when
* the buttons/finger is on the tablet's left. HID values
* are zero when buttons are toward the top.
*/
value = wacom_offset_rotation(input, usage, value, 1, 4);
break;
case WACOM_HID_WD_SENSE:
wacom_wac->hid_data.sense_state = value;
return;
case WACOM_HID_WD_SERIALHI:
if (value) {
wacom_wac->serial[0] = (wacom_wac->serial[0] & 0xFFFFFFFF);
wacom_wac->serial[0] |= ((__u64)value) << 32;
/*
* Non-USI EMR devices may contain additional tool type
* information here. See WACOM_HID_WD_TOOLTYPE case for
* more details.
*/
if (value >> 20 == 1) {
wacom_wac->id[0] |= value & 0xFFFFF;
}
}
return;
case WACOM_HID_WD_TOOLTYPE:
/*
* Some devices (MobileStudio Pro, and possibly later
* devices as well) do not return the complete tool
* type in their WACOM_HID_WD_TOOLTYPE usage. Use a
* bitwise OR so the complete value can be built
* up over time :(
*/
wacom_wac->id[0] |= value;
return;
case WACOM_HID_WD_OFFSETLEFT:
if (features->offset_left && value != features->offset_left)
hid_warn(hdev, "%s: overriding existing left offset "
"%d -> %d\n", __func__, value,
features->offset_left);
features->offset_left = value;
return;
case WACOM_HID_WD_OFFSETRIGHT:
if (features->offset_right && value != features->offset_right)
hid_warn(hdev, "%s: overriding existing right offset "
"%d -> %d\n", __func__, value,
features->offset_right);
features->offset_right = value;
return;
case WACOM_HID_WD_OFFSETTOP:
if (features->offset_top && value != features->offset_top)
hid_warn(hdev, "%s: overriding existing top offset "
"%d -> %d\n", __func__, value,
features->offset_top);
features->offset_top = value;
return;
case WACOM_HID_WD_OFFSETBOTTOM:
if (features->offset_bottom && value != features->offset_bottom)
hid_warn(hdev, "%s: overriding existing bottom offset "
"%d -> %d\n", __func__, value,
features->offset_bottom);
features->offset_bottom = value;
return;
}
/* send pen events only when touch is up or forced out
* or touch arbitration is off
*/
if (!usage->type || delay_pen_events(wacom_wac))
return;
/* send pen events only when the pen is in range */
if (wacom_wac->hid_data.inrange_state)
input_event(input, usage->type, usage->code, value);
else if (wacom_wac->shared->stylus_in_proximity && !wacom_wac->hid_data.sense_state)
input_event(input, usage->type, usage->code, 0);
}
static void wacom_wac_pen_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
return;
}
static void wacom_wac_pen_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->pen_input;
bool range = wacom_wac->hid_data.inrange_state;
bool sense = wacom_wac->hid_data.sense_state;
if (!wacom_wac->tool[0] && range) { /* first in range */
/* Going into range select tool */
if (wacom_wac->hid_data.invert_state)
wacom_wac->tool[0] = BTN_TOOL_RUBBER;
else if (wacom_wac->id[0])
wacom_wac->tool[0] = wacom_intuos_get_tool_type(wacom_wac->id[0]);
else
wacom_wac->tool[0] = BTN_TOOL_PEN;
if (wacom_wac->shared->stylus_in_proximity &&
wacom_wac->tool[0] != BTN_TOOL_PEN) {
input_report_key(input, BTN_TOOL_PEN, 0);
input_sync(input);
}
}
else if (!wacom_wac->tool[0] && !range) { /* entering in sense */
input_report_key(input, BTN_TOOL_PEN, sense);
input_report_key(input, BTN_TOUCH, 0);
input_sync(input);
}
/* keep pen state for touch events */
wacom_wac->shared->stylus_in_proximity = sense;
if (!delay_pen_events(wacom_wac) && wacom_wac->tool[0]) {
int id = wacom_wac->id[0];
/*
* Non-USI EMR tools should have their IDs mangled to
* match the legacy behavior of wacom_intuos_general
*/
if (wacom_wac->serial[0] >> 52 == 1)
id = wacom_intuos_id_mangle(id);
/*
* To ensure compatibility with xf86-input-wacom, we should
* report the BTN_TOOL_* event prior to the ABS_MISC or
* MSC_SERIAL events.
*/
input_report_key(input, BTN_TOUCH,
wacom_wac->hid_data.tipswitch);
input_report_key(input, wacom_wac->tool[0], sense);
if (wacom_wac->serial[0]) {
input_event(input, EV_MSC, MSC_SERIAL, wacom_wac->serial[0]);
input_report_abs(input, ABS_MISC, sense ? id : 0);
}
wacom_wac->hid_data.tipswitch = false;
input_sync(input);
}
if (!sense) {
wacom_wac->tool[0] = 0;
wacom_wac->id[0] = 0;
wacom_wac->serial[0] = 0;
}
}
static void wacom_wac_finger_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->touch_input;
unsigned touch_max = wacom_wac->features.touch_max;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_GD_X:
if (touch_max == 1)
wacom_map_usage(input, usage, field, EV_ABS, ABS_X, 4);
else
wacom_map_usage(input, usage, field, EV_ABS,
ABS_MT_POSITION_X, 4);
break;
case HID_GD_Y:
if (touch_max == 1)
wacom_map_usage(input, usage, field, EV_ABS, ABS_Y, 4);
else
wacom_map_usage(input, usage, field, EV_ABS,
ABS_MT_POSITION_Y, 4);
break;
case HID_DG_WIDTH:
case HID_DG_HEIGHT:
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MAJOR, 0);
wacom_map_usage(input, usage, field, EV_ABS, ABS_MT_TOUCH_MINOR, 0);
input_set_abs_params(input, ABS_MT_ORIENTATION, 0, 1, 0, 0);
break;
case HID_DG_TIPSWITCH:
wacom_map_usage(input, usage, field, EV_KEY, BTN_TOUCH, 0);
break;
case HID_DG_CONTACTCOUNT:
wacom_wac->hid_data.cc_report = field->report->id;
wacom_wac->hid_data.cc_index = field->index;
wacom_wac->hid_data.cc_value_index = usage->usage_index;
break;
case HID_DG_CONTACTID:
if ((field->logical_maximum - field->logical_minimum) < touch_max) {
/*
* The HID descriptor for G11 sensors leaves logical
* maximum set to '1' despite it being a multitouch
* device. Override to a sensible number.
*/
field->logical_maximum = 255;
}
break;
}
}
static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac,
struct input_dev *input)
{
struct hid_data *hid_data = &wacom_wac->hid_data;
bool mt = wacom_wac->features.touch_max > 1;
bool prox = hid_data->tipswitch &&
report_touch_events(wacom_wac);
if (wacom_wac->shared->has_mute_touch_switch &&
!wacom_wac->shared->is_touch_on) {
if (!wacom_wac->shared->touch_down)
return;
prox = 0;
}
wacom_wac->hid_data.num_received++;
if (wacom_wac->hid_data.num_received > wacom_wac->hid_data.num_expected)
return;
if (mt) {
int slot;
slot = input_mt_get_slot_by_key(input, hid_data->id);
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, prox);
}
else {
input_report_key(input, BTN_TOUCH, prox);
}
if (prox) {
input_report_abs(input, mt ? ABS_MT_POSITION_X : ABS_X,
hid_data->x);
input_report_abs(input, mt ? ABS_MT_POSITION_Y : ABS_Y,
hid_data->y);
if (test_bit(ABS_MT_TOUCH_MAJOR, input->absbit)) {
input_report_abs(input, ABS_MT_TOUCH_MAJOR, max(hid_data->width, hid_data->height));
input_report_abs(input, ABS_MT_TOUCH_MINOR, min(hid_data->width, hid_data->height));
if (hid_data->width != hid_data->height)
input_report_abs(input, ABS_MT_ORIENTATION, hid_data->width <= hid_data->height ? 0 : 1);
}
}
}
static void wacom_wac_finger_event(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
unsigned equivalent_usage = wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_GD_X:
wacom_wac->hid_data.x = value;
break;
case HID_GD_Y:
wacom_wac->hid_data.y = value;
break;
case HID_DG_WIDTH:
wacom_wac->hid_data.width = value;
break;
case HID_DG_HEIGHT:
wacom_wac->hid_data.height = value;
break;
case HID_DG_CONTACTID:
wacom_wac->hid_data.id = value;
break;
case HID_DG_TIPSWITCH:
wacom_wac->hid_data.tipswitch = value;
break;
}
if (usage->usage_index + 1 == field->report_count) {
if (equivalent_usage == wacom_wac->hid_data.last_slot_field)
wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input);
}
}
static void wacom_wac_finger_pre_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct hid_data* hid_data = &wacom_wac->hid_data;
int i;
for (i = 0; i < report->maxfield; i++) {
struct hid_field *field = report->field[i];
int j;
for (j = 0; j < field->maxusage; j++) {
struct hid_usage *usage = &field->usage[j];
unsigned int equivalent_usage =
wacom_equivalent_usage(usage->hid);
switch (equivalent_usage) {
case HID_GD_X:
case HID_GD_Y:
case HID_DG_WIDTH:
case HID_DG_HEIGHT:
case HID_DG_CONTACTID:
case HID_DG_INRANGE:
case HID_DG_INVERT:
case HID_DG_TIPSWITCH:
hid_data->last_slot_field = equivalent_usage;
break;
case HID_DG_CONTACTCOUNT:
hid_data->cc_report = report->id;
hid_data->cc_index = i;
hid_data->cc_value_index = j;
break;
}
}
}
if (hid_data->cc_report != 0 &&
hid_data->cc_index >= 0) {
struct hid_field *field = report->field[hid_data->cc_index];
int value = field->value[hid_data->cc_value_index];
if (value)
hid_data->num_expected = value;
}
else {
hid_data->num_expected = wacom_wac->features.touch_max;
}
}
static void wacom_wac_finger_report(struct hid_device *hdev,
struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct input_dev *input = wacom_wac->touch_input;
unsigned touch_max = wacom_wac->features.touch_max;
/* If more packets of data are expected, give us a chance to
* process them rather than immediately syncing a partial
* update.
*/
if (wacom_wac->hid_data.num_received < wacom_wac->hid_data.num_expected)
return;
if (touch_max > 1)
input_mt_sync_frame(input);
input_sync(input);
wacom_wac->hid_data.num_received = 0;
/* keep touch state for pen event */
wacom_wac->shared->touch_down = wacom_wac_finger_count_touches(wacom_wac);
}
void wacom_wac_usage_mapping(struct hid_device *hdev,
struct hid_field *field, struct hid_usage *usage)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct wacom_features *features = &wacom_wac->features;
if (WACOM_DIRECT_DEVICE(field))
features->device_type |= WACOM_DEVICETYPE_DIRECT;
/* usage tests must precede field tests */
if (WACOM_BATTERY_USAGE(usage))
wacom_wac_battery_usage_mapping(hdev, field, usage);
else if (WACOM_PAD_FIELD(field))
wacom_wac_pad_usage_mapping(hdev, field, usage);
else if (WACOM_PEN_FIELD(field))
wacom_wac_pen_usage_mapping(hdev, field, usage);
else if (WACOM_FINGER_FIELD(field))
wacom_wac_finger_usage_mapping(hdev, field, usage);
}
void wacom_wac_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct wacom *wacom = hid_get_drvdata(hdev);
if (wacom->wacom_wac.features.type != HID_GENERIC)
return;
if (value > field->logical_maximum || value < field->logical_minimum)
return;
/* usage tests must precede field tests */
if (WACOM_BATTERY_USAGE(usage))
wacom_wac_battery_event(hdev, field, usage, value);
else if (WACOM_PAD_FIELD(field) && wacom->wacom_wac.pad_input)
wacom_wac_pad_event(hdev, field, usage, value);
else if (WACOM_PEN_FIELD(field) && wacom->wacom_wac.pen_input)
wacom_wac_pen_event(hdev, field, usage, value);
else if (WACOM_FINGER_FIELD(field) && wacom->wacom_wac.touch_input)
wacom_wac_finger_event(hdev, field, usage, value);
}
static void wacom_report_events(struct hid_device *hdev, struct hid_report *report)
{
int r;
for (r = 0; r < report->maxfield; r++) {
struct hid_field *field;
unsigned count, n;
field = report->field[r];
count = field->report_count;
if (!(HID_MAIN_ITEM_VARIABLE & field->flags))
continue;
for (n = 0; n < count; n++)
wacom_wac_event(hdev, field, &field->usage[n], field->value[n]);
}
}
void wacom_wac_report(struct hid_device *hdev, struct hid_report *report)
{
struct wacom *wacom = hid_get_drvdata(hdev);
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
struct hid_field *field = report->field[0];
if (wacom_wac->features.type != HID_GENERIC)
return;
wacom_wac_battery_pre_report(hdev, report);
if (WACOM_PAD_FIELD(field) && wacom->wacom_wac.pad_input)
wacom_wac_pad_pre_report(hdev, report);
else if (WACOM_PEN_FIELD(field) && wacom->wacom_wac.pen_input)
wacom_wac_pen_pre_report(hdev, report);
else if (WACOM_FINGER_FIELD(field) && wacom->wacom_wac.touch_input)
wacom_wac_finger_pre_report(hdev, report);
wacom_report_events(hdev, report);
/*
* Non-input reports may be sent prior to the device being
* completely initialized. Since only their events need
* to be processed, exit after 'wacom_report_events' has
* been called to prevent potential crashes in the report-
* processing functions.
*/
if (report->type != HID_INPUT_REPORT)
return;
wacom_wac_battery_report(hdev, report);
if (WACOM_PAD_FIELD(field) && wacom->wacom_wac.pad_input)
wacom_wac_pad_report(hdev, report);
else if (WACOM_PEN_FIELD(field) && wacom->wacom_wac.pen_input)
wacom_wac_pen_report(hdev, report);
else if (WACOM_FINGER_FIELD(field) && wacom->wacom_wac.touch_input)
wacom_wac_finger_report(hdev, report);
}
static int wacom_bpt_touch(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->touch_input;
struct input_dev *pad_input = wacom->pad_input;
unsigned char *data = wacom->data;
int i;
if (data[0] != 0x02)
return 0;
for (i = 0; i < 2; i++) {
int offset = (data[1] & 0x80) ? (8 * i) : (9 * i);
bool touch = report_touch_events(wacom)
&& (data[offset + 3] & 0x80);
input_mt_slot(input, i);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff;
int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff;
if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) {
x <<= 5;
y <<= 5;
}
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
}
input_mt_sync_frame(input);
input_report_key(pad_input, BTN_LEFT, (data[1] & 0x08) != 0);
input_report_key(pad_input, BTN_FORWARD, (data[1] & 0x04) != 0);
input_report_key(pad_input, BTN_BACK, (data[1] & 0x02) != 0);
input_report_key(pad_input, BTN_RIGHT, (data[1] & 0x01) != 0);
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
return 1;
}
static void wacom_bpt3_touch_msg(struct wacom_wac *wacom, unsigned char *data)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->touch_input;
bool touch = data[1] & 0x80;
int slot = input_mt_get_slot_by_key(input, data[0]);
if (slot < 0)
return;
touch = touch && report_touch_events(wacom);
input_mt_slot(input, slot);
input_mt_report_slot_state(input, MT_TOOL_FINGER, touch);
if (touch) {
int x = (data[2] << 4) | (data[4] >> 4);
int y = (data[3] << 4) | (data[4] & 0x0f);
int width, height;
if (features->type >= INTUOSPS && features->type <= INTUOSHT2) {
width = data[5] * 100;
height = data[6] * 100;
} else {
/*
* "a" is a scaled-down area which we assume is
* roughly circular and which can be described as:
* a=(pi*r^2)/C.
*/
int a = data[5];
int x_res = input_abs_get_res(input, ABS_MT_POSITION_X);
int y_res = input_abs_get_res(input, ABS_MT_POSITION_Y);
width = 2 * int_sqrt(a * WACOM_CONTACT_AREA_SCALE);
height = width * y_res / x_res;
}
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
input_report_abs(input, ABS_MT_TOUCH_MAJOR, width);
input_report_abs(input, ABS_MT_TOUCH_MINOR, height);
}
}
static void wacom_bpt3_button_msg(struct wacom_wac *wacom, unsigned char *data)
{
struct input_dev *input = wacom->pad_input;
struct wacom_features *features = &wacom->features;
if (features->type == INTUOSHT || features->type == INTUOSHT2) {
input_report_key(input, BTN_LEFT, (data[1] & 0x02) != 0);
input_report_key(input, BTN_BACK, (data[1] & 0x08) != 0);
} else {
input_report_key(input, BTN_BACK, (data[1] & 0x02) != 0);
input_report_key(input, BTN_LEFT, (data[1] & 0x08) != 0);
}
input_report_key(input, BTN_FORWARD, (data[1] & 0x04) != 0);
input_report_key(input, BTN_RIGHT, (data[1] & 0x01) != 0);
}
static int wacom_bpt3_touch(struct wacom_wac *wacom)
{
unsigned char *data = wacom->data;
int count = data[1] & 0x07;
int touch_changed = 0, i;
if (data[0] != 0x02)
return 0;
/* data has up to 7 fixed sized 8-byte messages starting at data[2] */
for (i = 0; i < count; i++) {
int offset = (8 * i) + 2;
int msg_id = data[offset];
if (msg_id >= 2 && msg_id <= 17) {
wacom_bpt3_touch_msg(wacom, data + offset);
touch_changed++;
} else if (msg_id == 128)
wacom_bpt3_button_msg(wacom, data + offset);
}
/* only update touch if we actually have a touchpad and touch data changed */
if (wacom->touch_input && touch_changed) {
input_mt_sync_frame(wacom->touch_input);
wacom->shared->touch_down = wacom_wac_finger_count_touches(wacom);
}
return 1;
}
static int wacom_bpt_pen(struct wacom_wac *wacom)
{
struct wacom_features *features = &wacom->features;
struct input_dev *input = wacom->pen_input;
unsigned char *data = wacom->data;
int prox = 0, x = 0, y = 0, p = 0, d = 0, pen = 0, btn1 = 0, btn2 = 0;
if (data[0] != WACOM_REPORT_PENABLED)
return 0;
prox = (data[1] & 0x20) == 0x20;
/*
* All reports shared between PEN and RUBBER tool must be
* forced to a known starting value (zero) when transitioning to
* out-of-prox.
*
* If not reset then, to userspace, it will look like lost events
* if new tool comes in-prox with same values as previous tool sent.
*
* Hardware does report zero in most out-of-prox cases but not all.
*/
if (!wacom->shared->stylus_in_proximity) {
if (data[1] & 0x08) {
wacom->tool[0] = BTN_TOOL_RUBBER;
wacom->id[0] = ERASER_DEVICE_ID;
} else {
wacom->tool[0] = BTN_TOOL_PEN;
wacom->id[0] = STYLUS_DEVICE_ID;
}
}
wacom->shared->stylus_in_proximity = prox;
if (delay_pen_events(wacom))
return 0;
if (prox) {
x = le16_to_cpup((__le16 *)&data[2]);
y = le16_to_cpup((__le16 *)&data[4]);
p = le16_to_cpup((__le16 *)&data[6]);
/*
* Convert distance from out prox to distance from tablet.
* distance will be greater than distance_max once
* touching and applying pressure; do not report negative
* distance.
*/
if (data[8] <= features->distance_max)
d = features->distance_max - data[8];
pen = data[1] & 0x01;
btn1 = data[1] & 0x02;
btn2 = data[1] & 0x04;
} else {
wacom->id[0] = 0;
}
input_report_key(input, BTN_TOUCH, pen);
input_report_key(input, BTN_STYLUS, btn1);
input_report_key(input, BTN_STYLUS2, btn2);
input_report_abs(input, ABS_X, x);
input_report_abs(input, ABS_Y, y);
input_report_abs(input, ABS_PRESSURE, p);
input_report_abs(input, ABS_DISTANCE, d);
input_report_key(input, wacom->tool[0], prox); /* PEN or RUBBER */
input_report_abs(input, ABS_MISC, wacom->id[0]); /* TOOL ID */
return 1;
}
static int wacom_bpt_irq(struct wacom_wac *wacom, size_t len)
{
struct wacom_features *features = &wacom->features;
if ((features->type == INTUOSHT2) &&
(features->device_type & WACOM_DEVICETYPE_PEN))
return wacom_intuos_irq(wacom);
else if (len == WACOM_PKGLEN_BBTOUCH)
return wacom_bpt_touch(wacom);
else if (len == WACOM_PKGLEN_BBTOUCH3)
return wacom_bpt3_touch(wacom);
else if (len == WACOM_PKGLEN_BBFUN || len == WACOM_PKGLEN_BBPEN)
return wacom_bpt_pen(wacom);
return 0;
}
static void wacom_bamboo_pad_pen_event(struct wacom_wac *wacom,
unsigned char *data)
{
unsigned char prefix;
/*
* We need to reroute the event from the debug interface to the
* pen interface.
* We need to add the report ID to the actual pen report, so we
* temporary overwrite the first byte to prevent having to kzalloc/kfree
* and memcpy the report.
*/
prefix = data[0];
data[0] = WACOM_REPORT_BPAD_PEN;
/*
* actually reroute the event.
* No need to check if wacom->shared->pen is valid, hid_input_report()
* will check for us.
*/
hid_input_report(wacom->shared->pen, HID_INPUT_REPORT, data,
WACOM_PKGLEN_PENABLED, 1);
data[0] = prefix;
}
static int wacom_bamboo_pad_touch_event(struct wacom_wac *wacom,
unsigned char *data)
{
struct input_dev *input = wacom->touch_input;
unsigned char *finger_data, prefix;
unsigned id;
int x, y;
bool valid;
prefix = data[0];
for (id = 0; id < wacom->features.touch_max; id++) {
valid = !!(prefix & BIT(id)) &&
report_touch_events(wacom);
input_mt_slot(input, id);
input_mt_report_slot_state(input, MT_TOOL_FINGER, valid);
if (!valid)
continue;
finger_data = data + 1 + id * 3;
x = finger_data[0] | ((finger_data[1] & 0x0f) << 8);
y = (finger_data[2] << 4) | (finger_data[1] >> 4);
input_report_abs(input, ABS_MT_POSITION_X, x);
input_report_abs(input, ABS_MT_POSITION_Y, y);
}
input_mt_sync_frame(input);
input_report_key(input, BTN_LEFT, prefix & 0x40);
input_report_key(input, BTN_RIGHT, prefix & 0x80);
/* keep touch state for pen event */
wacom->shared->touch_down = !!prefix && report_touch_events(wacom);
return 1;
}
static int wacom_bamboo_pad_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
if (!((len == WACOM_PKGLEN_BPAD_TOUCH) ||
(len == WACOM_PKGLEN_BPAD_TOUCH_USB)) ||
(data[0] != WACOM_REPORT_BPAD_TOUCH))
return 0;
if (data[1] & 0x01)
wacom_bamboo_pad_pen_event(wacom, &data[1]);
if (data[1] & 0x02)
return wacom_bamboo_pad_touch_event(wacom, &data[9]);
return 0;
}
static int wacom_wireless_irq(struct wacom_wac *wacom, size_t len)
{
unsigned char *data = wacom->data;
int connected;
if (len != WACOM_PKGLEN_WIRELESS || data[0] != WACOM_REPORT_WL)
return 0;
connected = data[1] & 0x01;
if (connected) {
int pid, battery, charging;
if ((wacom->shared->type == INTUOSHT ||
wacom->shared->type == INTUOSHT2) &&
wacom->shared->touch_input &&
wacom->shared->touch_max) {
input_report_switch(wacom->shared->touch_input,
SW_MUTE_DEVICE, data[5] & 0x40);
input_sync(wacom->shared->touch_input);
}
pid = get_unaligned_be16(&data[6]);
battery = (data[5] & 0x3f) * 100 / 31;
charging = !!(data[5] & 0x80);
if (wacom->pid != pid) {
wacom->pid = pid;
wacom_schedule_work(wacom, WACOM_WORKER_WIRELESS);
}
wacom_notify_battery(wacom, WACOM_POWER_SUPPLY_STATUS_AUTO,
battery, charging, 1, 0);
} else if (wacom->pid != 0) {
/* disconnected while previously connected */
wacom->pid = 0;
wacom_schedule_work(wacom, WACOM_WORKER_WIRELESS);
wacom_notify_battery(wacom, POWER_SUPPLY_STATUS_UNKNOWN, 0, 0, 0, 0);
}
return 0;
}
static int wacom_status_irq(struct wacom_wac *wacom_wac, size_t len)
{
struct wacom *wacom = container_of(wacom_wac, struct wacom, wacom_wac);
struct wacom_features *features = &wacom_wac->features;
unsigned char *data = wacom_wac->data;
if (data[0] != WACOM_REPORT_USB)
return 0;
if ((features->type == INTUOSHT ||
features->type == INTUOSHT2) &&
wacom_wac->shared->touch_input &&
features->touch_max) {
input_report_switch(wacom_wac->shared->touch_input,
SW_MUTE_DEVICE, data[8] & 0x40);
input_sync(wacom_wac->shared->touch_input);
}
if (data[9] & 0x02) { /* wireless module is attached */
int battery = (data[8] & 0x3f) * 100 / 31;
bool charging = !!(data[8] & 0x80);
wacom_notify_battery(wacom_wac, WACOM_POWER_SUPPLY_STATUS_AUTO,
battery, charging, battery || charging, 1);
if (!wacom->battery.battery &&
!(features->quirks & WACOM_QUIRK_BATTERY)) {
features->quirks |= WACOM_QUIRK_BATTERY;
wacom_schedule_work(wacom_wac, WACOM_WORKER_BATTERY);
}
}
else if ((features->quirks & WACOM_QUIRK_BATTERY) &&
wacom->battery.battery) {
features->quirks &= ~WACOM_QUIRK_BATTERY;
wacom_schedule_work(wacom_wac, WACOM_WORKER_BATTERY);
wacom_notify_battery(wacom_wac, POWER_SUPPLY_STATUS_UNKNOWN, 0, 0, 0, 0);
}
return 0;
}
void wacom_wac_irq(struct wacom_wac *wacom_wac, size_t len)
{
bool sync;
switch (wacom_wac->features.type) {
case PENPARTNER:
sync = wacom_penpartner_irq(wacom_wac);
break;
case PL:
sync = wacom_pl_irq(wacom_wac);
break;
case WACOM_G4:
case GRAPHIRE:
case GRAPHIRE_BT:
case WACOM_MO:
sync = wacom_graphire_irq(wacom_wac);
break;
case PTU:
sync = wacom_ptu_irq(wacom_wac);
break;
case DTU:
sync = wacom_dtu_irq(wacom_wac);
break;
case DTUS:
case DTUSX:
sync = wacom_dtus_irq(wacom_wac);
break;
case INTUOS:
case INTUOS3S:
case INTUOS3:
case INTUOS3L:
case INTUOS4S:
case INTUOS4:
case INTUOS4L:
case CINTIQ:
case WACOM_BEE:
case WACOM_13HD:
case WACOM_21UX2:
case WACOM_22HD:
case WACOM_24HD:
case WACOM_27QHD:
case DTK:
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
sync = wacom_intuos_irq(wacom_wac);
break;
case INTUOS4WL:
sync = wacom_intuos_bt_irq(wacom_wac, len);
break;
case WACOM_24HDT:
case WACOM_27QHDT:
sync = wacom_24hdt_irq(wacom_wac);
break;
case INTUOS5S:
case INTUOS5:
case INTUOS5L:
case INTUOSPS:
case INTUOSPM:
case INTUOSPL:
if (len == WACOM_PKGLEN_BBTOUCH3)
sync = wacom_bpt3_touch(wacom_wac);
else if (wacom_wac->data[0] == WACOM_REPORT_USB)
sync = wacom_status_irq(wacom_wac, len);
else
sync = wacom_intuos_irq(wacom_wac);
break;
case INTUOSP2_BT:
sync = wacom_intuos_pro2_bt_irq(wacom_wac, len);
break;
case TABLETPC:
case TABLETPCE:
case TABLETPC2FG:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
sync = wacom_tpc_irq(wacom_wac, len);
break;
case BAMBOO_PT:
case BAMBOO_PEN:
case BAMBOO_TOUCH:
case INTUOSHT:
case INTUOSHT2:
if (wacom_wac->data[0] == WACOM_REPORT_USB)
sync = wacom_status_irq(wacom_wac, len);
else
sync = wacom_bpt_irq(wacom_wac, len);
break;
case BAMBOO_PAD:
sync = wacom_bamboo_pad_irq(wacom_wac, len);
break;
case WIRELESS:
sync = wacom_wireless_irq(wacom_wac, len);
break;
case REMOTE:
sync = false;
if (wacom_wac->data[0] == WACOM_REPORT_DEVICE_LIST)
wacom_remote_status_irq(wacom_wac, len);
else
sync = wacom_remote_irq(wacom_wac, len);
break;
default:
sync = false;
break;
}
if (sync) {
if (wacom_wac->pen_input)
input_sync(wacom_wac->pen_input);
if (wacom_wac->touch_input)
input_sync(wacom_wac->touch_input);
if (wacom_wac->pad_input)
input_sync(wacom_wac->pad_input);
}
}
static void wacom_setup_basic_pro_pen(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
input_set_abs_params(input_dev, ABS_DISTANCE,
0, wacom_wac->features.distance_max, wacom_wac->features.distance_fuzz, 0);
}
static void wacom_setup_cintiq(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
struct wacom_features *features = &wacom_wac->features;
wacom_setup_basic_pro_pen(wacom_wac);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_BRUSH, input_dev->keybit);
__set_bit(BTN_TOOL_PENCIL, input_dev->keybit);
__set_bit(BTN_TOOL_AIRBRUSH, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 1023, 0, 0);
input_set_abs_params(input_dev, ABS_TILT_X, -64, 63, features->tilt_fuzz, 0);
input_abs_set_res(input_dev, ABS_TILT_X, 57);
input_set_abs_params(input_dev, ABS_TILT_Y, -64, 63, features->tilt_fuzz, 0);
input_abs_set_res(input_dev, ABS_TILT_Y, 57);
}
static void wacom_setup_intuos(struct wacom_wac *wacom_wac)
{
struct input_dev *input_dev = wacom_wac->pen_input;
input_set_capability(input_dev, EV_REL, REL_WHEEL);
wacom_setup_cintiq(wacom_wac);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
__set_bit(BTN_SIDE, input_dev->keybit);
__set_bit(BTN_EXTRA, input_dev->keybit);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_TOOL_LENS, input_dev->keybit);
input_set_abs_params(input_dev, ABS_RZ, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_RZ, 287);
input_set_abs_params(input_dev, ABS_THROTTLE, -1023, 1023, 0, 0);
}
void wacom_setup_device_quirks(struct wacom *wacom)
{
struct wacom_features *features = &wacom->wacom_wac.features;
/* The pen and pad share the same interface on most devices */
if (features->type == GRAPHIRE_BT || features->type == WACOM_G4 ||
features->type == DTUS ||
(features->type >= INTUOS3S && features->type <= WACOM_MO)) {
if (features->device_type & WACOM_DEVICETYPE_PEN)
features->device_type |= WACOM_DEVICETYPE_PAD;
}
/* touch device found but size is not defined. use default */
if (features->device_type & WACOM_DEVICETYPE_TOUCH && !features->x_max) {
features->x_max = 1023;
features->y_max = 1023;
}
/*
* Intuos5/Pro and Bamboo 3rd gen have no useful data about its
* touch interface in its HID descriptor. If this is the touch
* interface (PacketSize of WACOM_PKGLEN_BBTOUCH3), override the
* tablet values.
*/
if ((features->type >= INTUOS5S && features->type <= INTUOSPL) ||
(features->type >= INTUOSHT && features->type <= BAMBOO_PT)) {
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
if (features->touch_max)
features->device_type |= WACOM_DEVICETYPE_TOUCH;
if (features->type >= INTUOSHT && features->type <= BAMBOO_PT)
features->device_type |= WACOM_DEVICETYPE_PAD;
features->x_max = 4096;
features->y_max = 4096;
}
else if (features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->device_type |= WACOM_DEVICETYPE_PAD;
}
}
/*
* Hack for the Bamboo One:
* the device presents a PAD/Touch interface as most Bamboos and even
* sends ghosts PAD data on it. However, later, we must disable this
* ghost interface, and we can not detect it unless we set it here
* to WACOM_DEVICETYPE_PAD or WACOM_DEVICETYPE_TOUCH.
*/
if (features->type == BAMBOO_PEN &&
features->pktlen == WACOM_PKGLEN_BBTOUCH3)
features->device_type |= WACOM_DEVICETYPE_PAD;
/*
* Raw Wacom-mode pen and touch events both come from interface
* 0, whose HID descriptor has an application usage of 0xFF0D
* (i.e., WACOM_HID_WD_DIGITIZER). We route pen packets back
* out through the HID_GENERIC device created for interface 1,
* so rewrite this one to be of type WACOM_DEVICETYPE_TOUCH.
*/
if (features->type == BAMBOO_PAD)
features->device_type = WACOM_DEVICETYPE_TOUCH;
if (features->type == REMOTE)
features->device_type = WACOM_DEVICETYPE_PAD;
if (features->type == INTUOSP2_BT) {
features->device_type |= WACOM_DEVICETYPE_PEN |
WACOM_DEVICETYPE_PAD |
WACOM_DEVICETYPE_TOUCH;
features->quirks |= WACOM_QUIRK_BATTERY;
}
switch (features->type) {
case PL:
case DTU:
case DTUS:
case DTUSX:
case WACOM_21UX2:
case WACOM_22HD:
case DTK:
case WACOM_24HD:
case WACOM_27QHD:
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
case CINTIQ:
case WACOM_BEE:
case WACOM_13HD:
case WACOM_24HDT:
case WACOM_27QHDT:
case TABLETPC:
case TABLETPCE:
case TABLETPC2FG:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
features->device_type |= WACOM_DEVICETYPE_DIRECT;
break;
}
if (wacom->hdev->bus == BUS_BLUETOOTH)
features->quirks |= WACOM_QUIRK_BATTERY;
/* quirk for bamboo touch with 2 low res touches */
if ((features->type == BAMBOO_PT || features->type == BAMBOO_TOUCH) &&
features->pktlen == WACOM_PKGLEN_BBTOUCH) {
features->x_max <<= 5;
features->y_max <<= 5;
features->x_fuzz <<= 5;
features->y_fuzz <<= 5;
features->quirks |= WACOM_QUIRK_BBTOUCH_LOWRES;
}
if (features->type == WIRELESS) {
if (features->device_type == WACOM_DEVICETYPE_WL_MONITOR) {
features->quirks |= WACOM_QUIRK_BATTERY;
}
}
if (features->type == REMOTE)
features->device_type |= WACOM_DEVICETYPE_WL_MONITOR;
}
int wacom_setup_pen_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
if (!(features->device_type & WACOM_DEVICETYPE_PEN))
return -ENODEV;
if (features->device_type & WACOM_DEVICETYPE_DIRECT)
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
else
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->type == HID_GENERIC)
/* setup has already been done */
return 0;
__set_bit(BTN_TOUCH, input_dev->keybit);
__set_bit(ABS_MISC, input_dev->absbit);
input_set_abs_params(input_dev, ABS_X, 0 + features->offset_left,
features->x_max - features->offset_right,
features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0 + features->offset_top,
features->y_max - features->offset_bottom,
features->y_fuzz, 0);
input_set_abs_params(input_dev, ABS_PRESSURE, 0,
features->pressure_max, features->pressure_fuzz, 0);
/* penabled devices have fixed resolution for each model */
input_abs_set_res(input_dev, ABS_X, features->x_resolution);
input_abs_set_res(input_dev, ABS_Y, features->y_resolution);
switch (features->type) {
case GRAPHIRE_BT:
__clear_bit(ABS_MISC, input_dev->absbit);
case WACOM_MO:
case WACOM_G4:
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
/* fall through */
case GRAPHIRE:
input_set_capability(input_dev, EV_REL, REL_WHEEL);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
__set_bit(BTN_MIDDLE, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_MOUSE, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
break;
case WACOM_27QHD:
case WACOM_24HD:
case DTK:
case WACOM_22HD:
case WACOM_21UX2:
case WACOM_BEE:
case CINTIQ:
case WACOM_13HD:
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
wacom_setup_cintiq(wacom_wac);
break;
case INTUOS3:
case INTUOS3L:
case INTUOS3S:
case INTUOS4:
case INTUOS4WL:
case INTUOS4L:
case INTUOS4S:
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
/* fall through */
case INTUOS:
wacom_setup_intuos(wacom_wac);
break;
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
case INTUOSP2_BT:
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 287);
wacom_setup_intuos(wacom_wac);
break;
case WACOM_24HDT:
case WACOM_27QHDT:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
case TABLETPC2FG:
case TABLETPC:
case TABLETPCE:
__clear_bit(ABS_MISC, input_dev->absbit);
/* fall through */
case DTUS:
case DTUSX:
case PL:
case DTU:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
break;
case PTU:
__set_bit(BTN_STYLUS2, input_dev->keybit);
/* fall through */
case PENPARTNER:
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
break;
case INTUOSHT:
case BAMBOO_PT:
case BAMBOO_PEN:
case INTUOSHT2:
if (features->type == INTUOSHT2) {
wacom_setup_basic_pro_pen(wacom_wac);
} else {
__clear_bit(ABS_MISC, input_dev->absbit);
__set_bit(BTN_TOOL_PEN, input_dev->keybit);
__set_bit(BTN_TOOL_RUBBER, input_dev->keybit);
__set_bit(BTN_STYLUS, input_dev->keybit);
__set_bit(BTN_STYLUS2, input_dev->keybit);
input_set_abs_params(input_dev, ABS_DISTANCE, 0,
features->distance_max,
features->distance_fuzz, 0);
}
break;
case BAMBOO_PAD:
__clear_bit(ABS_MISC, input_dev->absbit);
break;
}
return 0;
}
int wacom_setup_touch_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
if (!(features->device_type & WACOM_DEVICETYPE_TOUCH))
return -ENODEV;
if (features->device_type & WACOM_DEVICETYPE_DIRECT)
__set_bit(INPUT_PROP_DIRECT, input_dev->propbit);
else
__set_bit(INPUT_PROP_POINTER, input_dev->propbit);
if (features->type == HID_GENERIC)
/* setup has already been done */
return 0;
__set_bit(BTN_TOUCH, input_dev->keybit);
if (features->touch_max == 1) {
input_set_abs_params(input_dev, ABS_X, 0,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_X,
features->x_resolution);
input_abs_set_res(input_dev, ABS_Y,
features->y_resolution);
}
else if (features->touch_max > 1) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X, 0,
features->x_max, features->x_fuzz, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y, 0,
features->y_max, features->y_fuzz, 0);
input_abs_set_res(input_dev, ABS_MT_POSITION_X,
features->x_resolution);
input_abs_set_res(input_dev, ABS_MT_POSITION_Y,
features->y_resolution);
}
switch (features->type) {
case INTUOSP2_BT:
input_dev->evbit[0] |= BIT_MASK(EV_SW);
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
if (wacom_wac->shared->touch->product == 0x361) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, 12440, 4, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, 8640, 4, 0);
}
else if (wacom_wac->shared->touch->product == 0x360) {
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
0, 8960, 4, 0);
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
0, 5920, 4, 0);
}
input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
input_abs_set_res(input_dev, ABS_MT_POSITION_X, 40);
/* fall through */
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_TOUCH_MINOR, 0, features->y_max, 0, 0);
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
break;
case WACOM_24HDT:
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_WIDTH_MAJOR, 0, features->x_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_WIDTH_MINOR, 0, features->y_max, 0, 0);
input_set_abs_params(input_dev, ABS_MT_ORIENTATION, 0, 1, 0, 0);
/* fall through */
case WACOM_27QHDT:
case MTSCREEN:
case MTTPC:
case MTTPC_B:
case TABLETPC2FG:
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_DIRECT);
/*fall through */
case TABLETPC:
case TABLETPCE:
break;
case INTUOSHT:
case INTUOSHT2:
input_dev->evbit[0] |= BIT_MASK(EV_SW);
__set_bit(SW_MUTE_DEVICE, input_dev->swbit);
/* fall through */
case BAMBOO_PT:
case BAMBOO_TOUCH:
if (features->pktlen == WACOM_PKGLEN_BBTOUCH3) {
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MAJOR,
0, features->x_max, 0, 0);
input_set_abs_params(input_dev,
ABS_MT_TOUCH_MINOR,
0, features->y_max, 0, 0);
}
input_mt_init_slots(input_dev, features->touch_max, INPUT_MT_POINTER);
break;
case BAMBOO_PAD:
input_mt_init_slots(input_dev, features->touch_max,
INPUT_MT_POINTER);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
break;
}
return 0;
}
static int wacom_numbered_button_to_key(int n)
{
if (n < 10)
return BTN_0 + n;
else if (n < 16)
return BTN_A + (n-10);
else if (n < 18)
return BTN_BASE + (n-16);
else
return 0;
}
static void wacom_setup_numbered_buttons(struct input_dev *input_dev,
int button_count)
{
int i;
for (i = 0; i < button_count; i++) {
int key = wacom_numbered_button_to_key(i);
if (key)
__set_bit(key, input_dev->keybit);
}
}
static void wacom_24hd_update_leds(struct wacom *wacom, int mask, int group)
{
struct wacom_led *led;
int i;
bool updated = false;
/*
* 24HD has LED group 1 to the left and LED group 0 to the right.
* So group 0 matches the second half of the buttons and thus the mask
* needs to be shifted.
*/
if (group == 0)
mask >>= 8;
for (i = 0; i < 3; i++) {
led = wacom_led_find(wacom, group, i);
if (!led) {
hid_err(wacom->hdev, "can't find LED %d in group %d\n",
i, group);
continue;
}
if (!updated && mask & BIT(i)) {
led->held = true;
led_trigger_event(&led->trigger, LED_FULL);
} else {
led->held = false;
}
}
}
static bool wacom_is_led_toggled(struct wacom *wacom, int button_count,
int mask, int group)
{
int button_per_group;
/*
* 21UX2 has LED group 1 to the left and LED group 0
* to the right. We need to reverse the group to match this
* historical behavior.
*/
if (wacom->wacom_wac.features.type == WACOM_21UX2)
group = 1 - group;
button_per_group = button_count/wacom->led.count;
return mask & (1 << (group * button_per_group));
}
static void wacom_update_led(struct wacom *wacom, int button_count, int mask,
int group)
{
struct wacom_led *led, *next_led;
int cur;
bool pressed;
if (wacom->wacom_wac.features.type == WACOM_24HD)
return wacom_24hd_update_leds(wacom, mask, group);
pressed = wacom_is_led_toggled(wacom, button_count, mask, group);
cur = wacom->led.groups[group].select;
led = wacom_led_find(wacom, group, cur);
if (!led) {
hid_err(wacom->hdev, "can't find current LED %d in group %d\n",
cur, group);
return;
}
if (!pressed) {
led->held = false;
return;
}
if (led->held && pressed)
return;
next_led = wacom_led_next(wacom, led);
if (!next_led) {
hid_err(wacom->hdev, "can't find next LED in group %d\n",
group);
return;
}
if (next_led == led)
return;
next_led->held = true;
led_trigger_event(&next_led->trigger,
wacom_leds_brightness_get(next_led));
}
static void wacom_report_numbered_buttons(struct input_dev *input_dev,
int button_count, int mask)
{
struct wacom *wacom = input_get_drvdata(input_dev);
int i;
for (i = 0; i < wacom->led.count; i++)
wacom_update_led(wacom, button_count, mask, i);
for (i = 0; i < button_count; i++) {
int key = wacom_numbered_button_to_key(i);
if (key)
input_report_key(input_dev, key, mask & (1 << i));
}
}
int wacom_setup_pad_input_capabilities(struct input_dev *input_dev,
struct wacom_wac *wacom_wac)
{
struct wacom_features *features = &wacom_wac->features;
if ((features->type == HID_GENERIC) && features->numbered_buttons > 0)
features->device_type |= WACOM_DEVICETYPE_PAD;
if (!(features->device_type & WACOM_DEVICETYPE_PAD))
return -ENODEV;
if (features->type == REMOTE && input_dev == wacom_wac->pad_input)
return -ENODEV;
input_dev->evbit[0] |= BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS);
/* kept for making legacy xf86-input-wacom working with the wheels */
__set_bit(ABS_MISC, input_dev->absbit);
/* kept for making legacy xf86-input-wacom accepting the pad */
if (!(input_dev->absinfo && (input_dev->absinfo[ABS_X].minimum ||
input_dev->absinfo[ABS_X].maximum)))
input_set_abs_params(input_dev, ABS_X, 0, 1, 0, 0);
if (!(input_dev->absinfo && (input_dev->absinfo[ABS_Y].minimum ||
input_dev->absinfo[ABS_Y].maximum)))
input_set_abs_params(input_dev, ABS_Y, 0, 1, 0, 0);
/* kept for making udev and libwacom accepting the pad */
__set_bit(BTN_STYLUS, input_dev->keybit);
wacom_setup_numbered_buttons(input_dev, features->numbered_buttons);
switch (features->type) {
case CINTIQ_HYBRID:
case CINTIQ_COMPANION_2:
case DTK:
case DTUS:
case GRAPHIRE_BT:
break;
case WACOM_MO:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case WACOM_G4:
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
input_set_capability(input_dev, EV_REL, REL_WHEEL);
break;
case WACOM_24HD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
input_set_abs_params(input_dev, ABS_THROTTLE, 0, 71, 0, 0);
break;
case WACOM_27QHD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
input_set_abs_params(input_dev, ABS_X, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_X, 1024); /* points/g */
input_set_abs_params(input_dev, ABS_Y, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_Y, 1024);
input_set_abs_params(input_dev, ABS_Z, -2048, 2048, 0, 0);
input_abs_set_res(input_dev, ABS_Z, 1024);
__set_bit(INPUT_PROP_ACCELEROMETER, input_dev->propbit);
break;
case WACOM_22HD:
__set_bit(KEY_PROG1, input_dev->keybit);
__set_bit(KEY_PROG2, input_dev->keybit);
__set_bit(KEY_PROG3, input_dev->keybit);
/* fall through */
case WACOM_21UX2:
case WACOM_BEE:
case CINTIQ:
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
break;
case WACOM_13HD:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOS3:
case INTUOS3L:
input_set_abs_params(input_dev, ABS_RY, 0, 4096, 0, 0);
/* fall through */
case INTUOS3S:
input_set_abs_params(input_dev, ABS_RX, 0, 4096, 0, 0);
break;
case INTUOS5:
case INTUOS5L:
case INTUOSPM:
case INTUOSPL:
case INTUOS5S:
case INTUOSPS:
case INTUOSP2_BT:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOS4WL:
/*
* For Bluetooth devices, the udev rule does not work correctly
* for pads unless we add a stylus capability, which forces
* ID_INPUT_TABLET to be set.
*/
__set_bit(BTN_STYLUS, input_dev->keybit);
/* fall through */
case INTUOS4:
case INTUOS4L:
case INTUOS4S:
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case INTUOSHT:
case BAMBOO_PT:
case BAMBOO_TOUCH:
case INTUOSHT2:
__clear_bit(ABS_MISC, input_dev->absbit);
__set_bit(BTN_LEFT, input_dev->keybit);
__set_bit(BTN_FORWARD, input_dev->keybit);
__set_bit(BTN_BACK, input_dev->keybit);
__set_bit(BTN_RIGHT, input_dev->keybit);
break;
case REMOTE:
input_set_capability(input_dev, EV_MSC, MSC_SERIAL);
input_set_abs_params(input_dev, ABS_WHEEL, 0, 71, 0, 0);
break;
case HID_GENERIC:
break;
default:
/* no pad supported */
return -ENODEV;
}
return 0;
}
static const struct wacom_features wacom_features_0x00 =
{ "Wacom Penpartner", 5040, 3780, 255, 0,
PENPARTNER, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
static const struct wacom_features wacom_features_0x10 =
{ "Wacom Graphire", 10206, 7422, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x81 =
{ "Wacom Graphire BT", 16704, 12064, 511, 32,
GRAPHIRE_BT, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES, 2 };
static const struct wacom_features wacom_features_0x11 =
{ "Wacom Graphire2 4x5", 10206, 7422, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x12 =
{ "Wacom Graphire2 5x7", 13918, 10206, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x13 =
{ "Wacom Graphire3", 10208, 7424, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x14 =
{ "Wacom Graphire3 6x8", 16704, 12064, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x15 =
{ "Wacom Graphire4 4x5", 10208, 7424, 511, 63,
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x16 =
{ "Wacom Graphire4 6x8", 16704, 12064, 511, 63,
WACOM_G4, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x17 =
{ "Wacom BambooFun 4x5", 14760, 9225, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x18 =
{ "Wacom BambooFun 6x8", 21648, 13530, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x19 =
{ "Wacom Bamboo1 Medium", 16704, 12064, 511, 63,
GRAPHIRE, WACOM_GRAPHIRE_RES, WACOM_GRAPHIRE_RES };
static const struct wacom_features wacom_features_0x60 =
{ "Wacom Volito", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x61 =
{ "Wacom PenStation2", 3250, 2320, 255, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x62 =
{ "Wacom Volito2 4x5", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x63 =
{ "Wacom Volito2 2x3", 3248, 2320, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x64 =
{ "Wacom PenPartner2", 3250, 2320, 511, 63,
GRAPHIRE, WACOM_VOLITO_RES, WACOM_VOLITO_RES };
static const struct wacom_features wacom_features_0x65 =
{ "Wacom Bamboo", 14760, 9225, 511, 63,
WACOM_MO, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x69 =
{ "Wacom Bamboo1", 5104, 3712, 511, 63,
GRAPHIRE, WACOM_PENPRTN_RES, WACOM_PENPRTN_RES };
static const struct wacom_features wacom_features_0x6A =
{ "Wacom Bamboo1 4x6", 14760, 9225, 1023, 63,
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x6B =
{ "Wacom Bamboo1 5x8", 21648, 13530, 1023, 63,
GRAPHIRE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x20 =
{ "Wacom Intuos 4x5", 12700, 10600, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x21 =
{ "Wacom Intuos 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x22 =
{ "Wacom Intuos 9x12", 30480, 24060, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x23 =
{ "Wacom Intuos 12x12", 30480, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x24 =
{ "Wacom Intuos 12x18", 45720, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x30 =
{ "Wacom PL400", 5408, 4056, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x31 =
{ "Wacom PL500", 6144, 4608, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x32 =
{ "Wacom PL600", 6126, 4604, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x33 =
{ "Wacom PL600SX", 6260, 5016, 255, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x34 =
{ "Wacom PL550", 6144, 4608, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x35 =
{ "Wacom PL800", 7220, 5780, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x37 =
{ "Wacom PL700", 6758, 5406, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x38 =
{ "Wacom PL510", 6282, 4762, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x39 =
{ "Wacom DTU710", 34080, 27660, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC4 =
{ "Wacom DTF521", 6282, 4762, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC0 =
{ "Wacom DTF720", 6858, 5506, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0xC2 =
{ "Wacom DTF720a", 6858, 5506, 511, 0,
PL, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x03 =
{ "Wacom Cintiq Partner", 20480, 15360, 511, 0,
PTU, WACOM_PL_RES, WACOM_PL_RES };
static const struct wacom_features wacom_features_0x41 =
{ "Wacom Intuos2 4x5", 12700, 10600, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x42 =
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x43 =
{ "Wacom Intuos2 9x12", 30480, 24060, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x44 =
{ "Wacom Intuos2 12x12", 30480, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x45 =
{ "Wacom Intuos2 12x18", 45720, 31680, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xB0 =
{ "Wacom Intuos3 4x5", 25400, 20320, 1023, 63,
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
static const struct wacom_features wacom_features_0xB1 =
{ "Wacom Intuos3 6x8", 40640, 30480, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB2 =
{ "Wacom Intuos3 9x12", 60960, 45720, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB3 =
{ "Wacom Intuos3 12x12", 60960, 60960, 1023, 63,
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB4 =
{ "Wacom Intuos3 12x19", 97536, 60960, 1023, 63,
INTUOS3L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB5 =
{ "Wacom Intuos3 6x11", 54204, 31750, 1023, 63,
INTUOS3, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xB7 =
{ "Wacom Intuos3 4x6", 31496, 19685, 1023, 63,
INTUOS3S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 4 };
static const struct wacom_features wacom_features_0xB8 =
{ "Wacom Intuos4 4x6", 31496, 19685, 2047, 63,
INTUOS4S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
static const struct wacom_features wacom_features_0xB9 =
{ "Wacom Intuos4 6x9", 44704, 27940, 2047, 63,
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBA =
{ "Wacom Intuos4 8x13", 65024, 40640, 2047, 63,
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBB =
{ "Wacom Intuos4 12x19", 97536, 60960, 2047, 63,
INTUOS4L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBC =
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
INTUOS4, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0xBD =
{ "Wacom Intuos4 WL", 40640, 25400, 2047, 63,
INTUOS4WL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0x26 =
{ "Wacom Intuos5 touch S", 31496, 19685, 2047, 63,
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16 };
static const struct wacom_features wacom_features_0x27 =
{ "Wacom Intuos5 touch M", 44704, 27940, 2047, 63,
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
static const struct wacom_features wacom_features_0x28 =
{ "Wacom Intuos5 touch L", 65024, 40640, 2047, 63,
INTUOS5L, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16 };
static const struct wacom_features wacom_features_0x29 =
{ "Wacom Intuos5 S", 31496, 19685, 2047, 63,
INTUOS5S, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7 };
static const struct wacom_features wacom_features_0x2A =
{ "Wacom Intuos5 M", 44704, 27940, 2047, 63,
INTUOS5, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9 };
static const struct wacom_features wacom_features_0x314 =
{ "Wacom Intuos Pro S", 31496, 19685, 2047, 63,
INTUOSPS, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 7, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x315 =
{ "Wacom Intuos Pro M", 44704, 27940, 2047, 63,
INTUOSPM, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x317 =
{ "Wacom Intuos Pro L", 65024, 40640, 2047, 63,
INTUOSPL, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xF4 =
{ "Wacom Cintiq 24HD", 104480, 65600, 2047, 63,
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xF8 =
{ "Wacom Cintiq 24HD touch", 104480, 65600, 2047, 63, /* Pen */
WACOM_24HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 16,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf6 };
static const struct wacom_features wacom_features_0xF6 =
{ "Wacom Cintiq 24HD touch", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0xf8, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x32A =
{ "Wacom Cintiq 27QHD", 120140, 67920, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x32B =
{ "Wacom Cintiq 27QHD touch", 120140, 67920, 2047, 63,
WACOM_27QHD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 0,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32C };
static const struct wacom_features wacom_features_0x32C =
{ "Wacom Cintiq 27QHD touch", .type = WACOM_27QHDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x32B, .touch_max = 10 };
static const struct wacom_features wacom_features_0x3F =
{ "Wacom Cintiq 21UX", 87200, 65600, 1023, 63,
CINTIQ, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 8 };
static const struct wacom_features wacom_features_0xC5 =
{ "Wacom Cintiq 20WSX", 86680, 54180, 1023, 63,
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
static const struct wacom_features wacom_features_0xC6 =
{ "Wacom Cintiq 12WX", 53020, 33440, 1023, 63,
WACOM_BEE, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 10 };
static const struct wacom_features wacom_features_0x304 =
{ "Wacom Cintiq 13HD", 59552, 33848, 1023, 63,
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x333 =
{ "Wacom Cintiq 13HD touch", 59552, 33848, 2047, 63,
WACOM_13HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x335 };
static const struct wacom_features wacom_features_0x335 =
{ "Wacom Cintiq 13HD touch", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x333, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xC7 =
{ "Wacom DTU1931", 37832, 30305, 511, 0,
PL, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xCE =
{ "Wacom DTU2231", 47864, 27011, 511, 0,
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBMOUSE };
static const struct wacom_features wacom_features_0xF0 =
{ "Wacom DTU1631", 34623, 19553, 511, 0,
DTU, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xFB =
{ "Wacom DTU1031", 22096, 13960, 511, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x32F =
{ "Wacom DTU1031X", 22672, 12928, 511, 0,
DTUSX, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 0,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x336 =
{ "Wacom DTU1141", 23672, 13403, 1023, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x57 =
{ "Wacom DTK2241", 95840, 54260, 2047, 63,
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x59 = /* Pen */
{ "Wacom DTH2242", 95840, 54260, 2047, 63,
DTK, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 6,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5D };
static const struct wacom_features wacom_features_0x5D = /* Touch */
{ "Wacom DTH2242", .type = WACOM_24HDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x59, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0xCC =
{ "Wacom Cintiq 21UX2", 87200, 65600, 2047, 63,
WACOM_21UX2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0xFA =
{ "Wacom Cintiq 22HD", 95840, 54260, 2047, 63,
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET };
static const struct wacom_features wacom_features_0x5B =
{ "Wacom Cintiq 22HDT", 95840, 54260, 2047, 63,
WACOM_22HD, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 18,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5e };
static const struct wacom_features wacom_features_0x5E =
{ "Wacom Cintiq 22HDT", .type = WACOM_24HDT,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x5b, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x90 =
{ "Wacom ISDv4 90", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x93 =
{ "Wacom ISDv4 93", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x97 =
{ "Wacom ISDv4 97", 26202, 16325, 511, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x9A =
{ "Wacom ISDv4 9A", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x9F =
{ "Wacom ISDv4 9F", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE2 =
{ "Wacom ISDv4 E2", 26202, 16325, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xE3 =
{ "Wacom ISDv4 E3", 26202, 16325, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xE5 =
{ "Wacom ISDv4 E5", 26202, 16325, 255, 0,
MTSCREEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xE6 =
{ "Wacom ISDv4 E6", 27760, 15694, 255, 0,
TABLETPC2FG, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xEC =
{ "Wacom ISDv4 EC", 25710, 14500, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xED =
{ "Wacom ISDv4 ED", 26202, 16325, 255, 0,
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xEF =
{ "Wacom ISDv4 EF", 26202, 16325, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x100 =
{ "Wacom ISDv4 100", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x101 =
{ "Wacom ISDv4 101", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10D =
{ "Wacom ISDv4 10D", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10E =
{ "Wacom ISDv4 10E", 27760, 15694, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x10F =
{ "Wacom ISDv4 10F", 27760, 15694, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x116 =
{ "Wacom ISDv4 116", 26202, 16325, 255, 0,
TABLETPCE, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x12C =
{ "Wacom ISDv4 12C", 27848, 15752, 2047, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4001 =
{ "Wacom ISDv4 4001", 26202, 16325, 255, 0,
MTTPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x4004 =
{ "Wacom ISDv4 4004", 11060, 6220, 255, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x5000 =
{ "Wacom ISDv4 5000", 27848, 15752, 1023, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x5002 =
{ "Wacom ISDv4 5002", 29576, 16724, 1023, 0,
MTTPC_B, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x47 =
{ "Wacom Intuos2 6x8", 20320, 16240, 1023, 31,
INTUOS, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x84 =
{ "Wacom Wireless Receiver", .type = WIRELESS, .touch_max = 16 };
static const struct wacom_features wacom_features_0xD0 =
{ "Wacom Bamboo 2FG", 14720, 9200, 1023, 31,
BAMBOO_TOUCH, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD1 =
{ "Wacom Bamboo 2FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD2 =
{ "Wacom Bamboo Craft", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD3 =
{ "Wacom Bamboo 2FG 6x8", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD4 =
{ "Wacom Bamboo Pen", 14720, 9200, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD5 =
{ "Wacom Bamboo Pen 6x8", 21648, 13700, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xD6 =
{ "Wacom BambooPT 2FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD7 =
{ "Wacom BambooPT 2FG Small", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xD8 =
{ "Wacom Bamboo Comic 2FG", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDA =
{ "Wacom Bamboo 2FG 4x5 SE", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDB =
{ "Wacom Bamboo 2FG 6x8 SE", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 2 };
static const struct wacom_features wacom_features_0xDD =
{ "Wacom Bamboo Connect", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0xDE =
{ "Wacom Bamboo 16FG 4x5", 14720, 9200, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
static const struct wacom_features wacom_features_0xDF =
{ "Wacom Bamboo 16FG 6x8", 21648, 13700, 1023, 31,
BAMBOO_PT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16 };
static const struct wacom_features wacom_features_0x300 =
{ "Wacom Bamboo One S", 14720, 9225, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x301 =
{ "Wacom Bamboo One M", 21648, 13530, 1023, 31,
BAMBOO_PEN, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x302 =
{ "Wacom Intuos PT S", 15200, 9500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x303 =
{ "Wacom Intuos PT M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x30E =
{ "Wacom Intuos S", 15200, 9500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x6004 =
{ "ISD-V4", 12800, 8000, 255, 0,
TABLETPC, WACOM_INTUOS_RES, WACOM_INTUOS_RES };
static const struct wacom_features wacom_features_0x307 =
{ "Wacom ISDv5 307", 59552, 33848, 2047, 63,
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x309 };
static const struct wacom_features wacom_features_0x309 =
{ "Wacom ISDv5 309", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x0307, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x30A =
{ "Wacom ISDv5 30A", 59552, 33848, 2047, 63,
CINTIQ_HYBRID, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30C };
static const struct wacom_features wacom_features_0x30C =
{ "Wacom ISDv5 30C", .type = WACOM_24HDT, /* Touch */
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x30A, .touch_max = 10,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x318 =
{ "Wacom USB Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
static const struct wacom_features wacom_features_0x319 =
{ "Wacom Wireless Bamboo PAD", 4095, 4095, /* Touch */
.type = BAMBOO_PAD, 35, 48, .touch_max = 4 };
static const struct wacom_features wacom_features_0x325 =
{ "Wacom ISDv5 325", 59552, 33848, 2047, 63,
CINTIQ_COMPANION_2, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 11,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
WACOM_CINTIQ_OFFSET, WACOM_CINTIQ_OFFSET,
.oVid = USB_VENDOR_ID_WACOM, .oPid = 0x326 };
static const struct wacom_features wacom_features_0x326 = /* Touch */
{ "Wacom ISDv5 326", .type = HID_GENERIC, .oVid = USB_VENDOR_ID_WACOM,
.oPid = 0x325 };
static const struct wacom_features wacom_features_0x323 =
{ "Wacom Intuos P M", 21600, 13500, 1023, 31,
INTUOSHT, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x331 =
{ "Wacom Express Key Remote", .type = REMOTE,
.numbered_buttons = 18, .check_for_hid_type = true,
.hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33B =
{ "Wacom Intuos S 2", 15200, 9500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33C =
{ "Wacom Intuos PT S 2", 15200, 9500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33D =
{ "Wacom Intuos P M 2", 21600, 13500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x33E =
{ "Wacom Intuos PT M 2", 21600, 13500, 2047, 63,
INTUOSHT2, WACOM_INTUOS_RES, WACOM_INTUOS_RES, .touch_max = 16,
.check_for_hid_type = true, .hid_type = HID_TYPE_USBNONE };
static const struct wacom_features wacom_features_0x343 =
{ "Wacom DTK1651", 34816, 19759, 1023, 0,
DTUS, WACOM_INTUOS_RES, WACOM_INTUOS_RES, 4,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET,
WACOM_DTU_OFFSET, WACOM_DTU_OFFSET };
static const struct wacom_features wacom_features_0x360 =
{ "Wacom Intuos Pro M", 44800, 29600, 8191, 63,
INTUOSP2_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 10 };
static const struct wacom_features wacom_features_0x361 =
{ "Wacom Intuos Pro L", 62200, 43200, 8191, 63,
INTUOSP2_BT, WACOM_INTUOS3_RES, WACOM_INTUOS3_RES, 9, .touch_max = 10 };
static const struct wacom_features wacom_features_HID_ANY_ID =
{ "Wacom HID", .type = HID_GENERIC, .oVid = HID_ANY_ID, .oPid = HID_ANY_ID };
#define USB_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_USB, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define BT_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_BLUETOOTH, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define I2C_DEVICE_WACOM(prod) \
HID_DEVICE(BUS_I2C, HID_GROUP_WACOM, USB_VENDOR_ID_WACOM, prod),\
.driver_data = (kernel_ulong_t)&wacom_features_##prod
#define USB_DEVICE_LENOVO(prod) \
HID_USB_DEVICE(USB_VENDOR_ID_LENOVO, prod), \
.driver_data = (kernel_ulong_t)&wacom_features_##prod
const struct hid_device_id wacom_ids[] = {
{ USB_DEVICE_WACOM(0x00) },
{ USB_DEVICE_WACOM(0x03) },
{ USB_DEVICE_WACOM(0x10) },
{ USB_DEVICE_WACOM(0x11) },
{ USB_DEVICE_WACOM(0x12) },
{ USB_DEVICE_WACOM(0x13) },
{ USB_DEVICE_WACOM(0x14) },
{ USB_DEVICE_WACOM(0x15) },
{ USB_DEVICE_WACOM(0x16) },
{ USB_DEVICE_WACOM(0x17) },
{ USB_DEVICE_WACOM(0x18) },
{ USB_DEVICE_WACOM(0x19) },
{ USB_DEVICE_WACOM(0x20) },
{ USB_DEVICE_WACOM(0x21) },
{ USB_DEVICE_WACOM(0x22) },
{ USB_DEVICE_WACOM(0x23) },
{ USB_DEVICE_WACOM(0x24) },
{ USB_DEVICE_WACOM(0x26) },
{ USB_DEVICE_WACOM(0x27) },
{ USB_DEVICE_WACOM(0x28) },
{ USB_DEVICE_WACOM(0x29) },
{ USB_DEVICE_WACOM(0x2A) },
{ USB_DEVICE_WACOM(0x30) },
{ USB_DEVICE_WACOM(0x31) },
{ USB_DEVICE_WACOM(0x32) },
{ USB_DEVICE_WACOM(0x33) },
{ USB_DEVICE_WACOM(0x34) },
{ USB_DEVICE_WACOM(0x35) },
{ USB_DEVICE_WACOM(0x37) },
{ USB_DEVICE_WACOM(0x38) },
{ USB_DEVICE_WACOM(0x39) },
{ USB_DEVICE_WACOM(0x3F) },
{ USB_DEVICE_WACOM(0x41) },
{ USB_DEVICE_WACOM(0x42) },
{ USB_DEVICE_WACOM(0x43) },
{ USB_DEVICE_WACOM(0x44) },
{ USB_DEVICE_WACOM(0x45) },
{ USB_DEVICE_WACOM(0x47) },
{ USB_DEVICE_WACOM(0x57) },
{ USB_DEVICE_WACOM(0x59) },
{ USB_DEVICE_WACOM(0x5B) },
{ USB_DEVICE_WACOM(0x5D) },
{ USB_DEVICE_WACOM(0x5E) },
{ USB_DEVICE_WACOM(0x60) },
{ USB_DEVICE_WACOM(0x61) },
{ USB_DEVICE_WACOM(0x62) },
{ USB_DEVICE_WACOM(0x63) },
{ USB_DEVICE_WACOM(0x64) },
{ USB_DEVICE_WACOM(0x65) },
{ USB_DEVICE_WACOM(0x69) },
{ USB_DEVICE_WACOM(0x6A) },
{ USB_DEVICE_WACOM(0x6B) },
{ BT_DEVICE_WACOM(0x81) },
{ USB_DEVICE_WACOM(0x84) },
{ USB_DEVICE_WACOM(0x90) },
{ USB_DEVICE_WACOM(0x93) },
{ USB_DEVICE_WACOM(0x97) },
{ USB_DEVICE_WACOM(0x9A) },
{ USB_DEVICE_WACOM(0x9F) },
{ USB_DEVICE_WACOM(0xB0) },
{ USB_DEVICE_WACOM(0xB1) },
{ USB_DEVICE_WACOM(0xB2) },
{ USB_DEVICE_WACOM(0xB3) },
{ USB_DEVICE_WACOM(0xB4) },
{ USB_DEVICE_WACOM(0xB5) },
{ USB_DEVICE_WACOM(0xB7) },
{ USB_DEVICE_WACOM(0xB8) },
{ USB_DEVICE_WACOM(0xB9) },
{ USB_DEVICE_WACOM(0xBA) },
{ USB_DEVICE_WACOM(0xBB) },
{ USB_DEVICE_WACOM(0xBC) },
{ BT_DEVICE_WACOM(0xBD) },
{ USB_DEVICE_WACOM(0xC0) },
{ USB_DEVICE_WACOM(0xC2) },
{ USB_DEVICE_WACOM(0xC4) },
{ USB_DEVICE_WACOM(0xC5) },
{ USB_DEVICE_WACOM(0xC6) },
{ USB_DEVICE_WACOM(0xC7) },
{ USB_DEVICE_WACOM(0xCC) },
{ USB_DEVICE_WACOM(0xCE) },
{ USB_DEVICE_WACOM(0xD0) },
{ USB_DEVICE_WACOM(0xD1) },
{ USB_DEVICE_WACOM(0xD2) },
{ USB_DEVICE_WACOM(0xD3) },
{ USB_DEVICE_WACOM(0xD4) },
{ USB_DEVICE_WACOM(0xD5) },
{ USB_DEVICE_WACOM(0xD6) },
{ USB_DEVICE_WACOM(0xD7) },
{ USB_DEVICE_WACOM(0xD8) },
{ USB_DEVICE_WACOM(0xDA) },
{ USB_DEVICE_WACOM(0xDB) },
{ USB_DEVICE_WACOM(0xDD) },
{ USB_DEVICE_WACOM(0xDE) },
{ USB_DEVICE_WACOM(0xDF) },
{ USB_DEVICE_WACOM(0xE2) },
{ USB_DEVICE_WACOM(0xE3) },
{ USB_DEVICE_WACOM(0xE5) },
{ USB_DEVICE_WACOM(0xE6) },
{ USB_DEVICE_WACOM(0xEC) },
{ USB_DEVICE_WACOM(0xED) },
{ USB_DEVICE_WACOM(0xEF) },
{ USB_DEVICE_WACOM(0xF0) },
{ USB_DEVICE_WACOM(0xF4) },
{ USB_DEVICE_WACOM(0xF6) },
{ USB_DEVICE_WACOM(0xF8) },
{ USB_DEVICE_WACOM(0xFA) },
{ USB_DEVICE_WACOM(0xFB) },
{ USB_DEVICE_WACOM(0x100) },
{ USB_DEVICE_WACOM(0x101) },
{ USB_DEVICE_WACOM(0x10D) },
{ USB_DEVICE_WACOM(0x10E) },
{ USB_DEVICE_WACOM(0x10F) },
{ USB_DEVICE_WACOM(0x116) },
{ USB_DEVICE_WACOM(0x12C) },
{ USB_DEVICE_WACOM(0x300) },
{ USB_DEVICE_WACOM(0x301) },
{ USB_DEVICE_WACOM(0x302) },
{ USB_DEVICE_WACOM(0x303) },
{ USB_DEVICE_WACOM(0x304) },
{ USB_DEVICE_WACOM(0x307) },
{ USB_DEVICE_WACOM(0x309) },
{ USB_DEVICE_WACOM(0x30A) },
{ USB_DEVICE_WACOM(0x30C) },
{ USB_DEVICE_WACOM(0x30E) },
{ USB_DEVICE_WACOM(0x314) },
{ USB_DEVICE_WACOM(0x315) },
{ USB_DEVICE_WACOM(0x317) },
{ USB_DEVICE_WACOM(0x318) },
{ USB_DEVICE_WACOM(0x319) },
{ USB_DEVICE_WACOM(0x323) },
{ USB_DEVICE_WACOM(0x325) },
{ USB_DEVICE_WACOM(0x326) },
{ USB_DEVICE_WACOM(0x32A) },
{ USB_DEVICE_WACOM(0x32B) },
{ USB_DEVICE_WACOM(0x32C) },
{ USB_DEVICE_WACOM(0x32F) },
{ USB_DEVICE_WACOM(0x331) },
{ USB_DEVICE_WACOM(0x333) },
{ USB_DEVICE_WACOM(0x335) },
{ USB_DEVICE_WACOM(0x336) },
{ USB_DEVICE_WACOM(0x33B) },
{ USB_DEVICE_WACOM(0x33C) },
{ USB_DEVICE_WACOM(0x33D) },
{ USB_DEVICE_WACOM(0x33E) },
{ USB_DEVICE_WACOM(0x343) },
{ BT_DEVICE_WACOM(0x360) },
{ BT_DEVICE_WACOM(0x361) },
{ USB_DEVICE_WACOM(0x4001) },
{ USB_DEVICE_WACOM(0x4004) },
{ USB_DEVICE_WACOM(0x5000) },
{ USB_DEVICE_WACOM(0x5002) },
{ USB_DEVICE_LENOVO(0x6004) },
{ USB_DEVICE_WACOM(HID_ANY_ID) },
{ I2C_DEVICE_WACOM(HID_ANY_ID) },
{ BT_DEVICE_WACOM(HID_ANY_ID) },
{ }
};
MODULE_DEVICE_TABLE(hid, wacom_ids);
Reference in New Issue View Git Blame Copy Permalink