linux/drivers/misc/apds9802als.c

// SPDX-License-Identifier: GPL-2.0-only
/*
 * apds9802als.c - apds9802  ALS Driver
 *
 * Copyright (C) 2009 Intel Corp
 *
 *  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 *
 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
 */

#include <linux/module.h>
#include <linux/slab.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/delay.h>
#include <linux/mutex.h>
#include <linux/sysfs.h>
#include <linux/pm_runtime.h>

#define ALS_MIN_RANGE_VAL 1
#define ALS_MAX_RANGE_VAL 2
#define POWER_STA_ENABLE 1
#define POWER_STA_DISABLE 0

#define DRIVER_NAME "apds9802als"

struct als_data {
	struct mutex mutex;
};

static ssize_t als_sensing_range_show(struct device *dev,
			struct device_attribute *attr,  char *buf)
{
	struct i2c_client *client = to_i2c_client(dev);
	int  val;

	val = i2c_smbus_read_byte_data(client, 0x81);
	if (val < 0)
		return val;
	if (val & 1)
		return sprintf(buf, "4095\n");
	else
		return sprintf(buf, "65535\n");
}

static int als_wait_for_data_ready(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);
	int ret;
	int retry = 10;

	do {
		msleep(30);
		ret = i2c_smbus_read_byte_data(client, 0x86);
	} while (!(ret & 0x80) && retry--);

	if (retry < 0) {
		dev_warn(dev, "timeout waiting for data ready\n");
		return -ETIMEDOUT;
	}

	return 0;
}

static ssize_t als_lux0_input_data_show(struct device *dev,
			struct device_attribute *attr, char *buf)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct als_data *data = i2c_get_clientdata(client);
	int ret_val;
	int temp;

	/* Protect against parallel reads */
	pm_runtime_get_sync(dev);
	mutex_lock(&data->mutex);

	/* clear EOC interrupt status */
	i2c_smbus_write_byte(client, 0x40);
	/* start measurement */
	temp = i2c_smbus_read_byte_data(client, 0x81);
	i2c_smbus_write_byte_data(client, 0x81, temp | 0x08);

	ret_val = als_wait_for_data_ready(dev);
	if (ret_val < 0)
		goto failed;

	temp = i2c_smbus_read_byte_data(client, 0x8C); /* LSB data */
	if (temp < 0) {
		ret_val = temp;
		goto failed;
	}
	ret_val = i2c_smbus_read_byte_data(client, 0x8D); /* MSB data */
	if (ret_val < 0)
		goto failed;

	mutex_unlock(&data->mutex);
	pm_runtime_put_sync(dev);

	temp = (ret_val << 8) | temp;
	return sprintf(buf, "%d\n", temp);
failed:
	mutex_unlock(&data->mutex);
	pm_runtime_put_sync(dev);
	return ret_val;
}

static ssize_t als_sensing_range_store(struct device *dev,
		struct device_attribute *attr, const  char *buf, size_t count)
{
	struct i2c_client *client = to_i2c_client(dev);
	struct als_data *data = i2c_get_clientdata(client);
	int ret_val;
	unsigned long val;

	ret_val = kstrtoul(buf, 10, &val);
	if (ret_val)
		return ret_val;

	if (val < 4096)
		val = 1;
	else if (val < 65536)
		val = 2;
	else
		return -ERANGE;

	pm_runtime_get_sync(dev);

	/* Make sure nobody else reads/modifies/writes 0x81 while we
	   are active */
	mutex_lock(&data->mutex);

	ret_val = i2c_smbus_read_byte_data(client, 0x81);
	if (ret_val < 0)
		goto fail;

	/* Reset the bits before setting them */
	ret_val = ret_val & 0xFA;

	if (val == 1) /* Setting detection range up to 4k LUX */
		ret_val = (ret_val | 0x01);
	else /* Setting detection range up to 64k LUX*/
		ret_val = (ret_val | 0x00);

	ret_val = i2c_smbus_write_byte_data(client, 0x81, ret_val);

	if (ret_val >= 0) {
		/* All OK */
		mutex_unlock(&data->mutex);
		pm_runtime_put_sync(dev);
		return count;
	}
fail:
	mutex_unlock(&data->mutex);
	pm_runtime_put_sync(dev);
	return ret_val;
}

static int als_set_power_state(struct i2c_client *client, bool on_off)
{
	int ret_val;
	struct als_data *data = i2c_get_clientdata(client);

	mutex_lock(&data->mutex);
	ret_val = i2c_smbus_read_byte_data(client, 0x80);
	if (ret_val < 0)
		goto fail;
	if (on_off)
		ret_val = ret_val | 0x01;
	else
		ret_val = ret_val & 0xFE;
	ret_val = i2c_smbus_write_byte_data(client, 0x80, ret_val);
fail:
	mutex_unlock(&data->mutex);
	return ret_val;
}

static DEVICE_ATTR(lux0_sensor_range, S_IRUGO | S_IWUSR,
	als_sensing_range_show, als_sensing_range_store);
static DEVICE_ATTR(lux0_input, S_IRUGO, als_lux0_input_data_show, NULL);

static struct attribute *mid_att_als[] = {
	&dev_attr_lux0_sensor_range.attr,
	&dev_attr_lux0_input.attr,
	NULL
};

static const struct attribute_group m_als_gr = {
	.name = "apds9802als",
	.attrs = mid_att_als
};

static int als_set_default_config(struct i2c_client *client)
{
	int ret_val;
	/* Write the command and then switch on */
	ret_val = i2c_smbus_write_byte_data(client, 0x80, 0x01);
	if (ret_val < 0) {
		dev_err(&client->dev, "failed default switch on write\n");
		return ret_val;
	}
	/* detection range: 1~64K Lux, maunal measurement */
	ret_val = i2c_smbus_write_byte_data(client, 0x81, 0x08);
	if (ret_val < 0)
		dev_err(&client->dev, "failed default LUX on write\n");

	/*  We always get 0 for the 1st measurement after system power on,
	 *  so make sure it is finished before user asks for data.
	 */
	als_wait_for_data_ready(&client->dev);

	return ret_val;
}

static int apds9802als_probe(struct i2c_client *client,
			     const struct i2c_device_id *id)
{
	int res;
	struct als_data *data;

	data = kzalloc(sizeof(struct als_data), GFP_KERNEL);
	if (data == NULL) {
		dev_err(&client->dev, "Memory allocation failed\n");
		return -ENOMEM;
	}
	i2c_set_clientdata(client, data);
	res = sysfs_create_group(&client->dev.kobj, &m_als_gr);
	if (res) {
		dev_err(&client->dev, "device create file failed\n");
		goto als_error1;
	}
	dev_info(&client->dev, "ALS chip found\n");
	als_set_default_config(client);
	mutex_init(&data->mutex);

	pm_runtime_set_active(&client->dev);
	pm_runtime_enable(&client->dev);

	return res;
als_error1:
	kfree(data);
	return res;
}

static void apds9802als_remove(struct i2c_client *client)
{
	struct als_data *data = i2c_get_clientdata(client);

	pm_runtime_get_sync(&client->dev);

	als_set_power_state(client, false);
	sysfs_remove_group(&client->dev.kobj, &m_als_gr);

	pm_runtime_disable(&client->dev);
	pm_runtime_set_suspended(&client->dev);
	pm_runtime_put_noidle(&client->dev);

	kfree(data);
}

#ifdef CONFIG_PM

static int apds9802als_suspend(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);

	als_set_power_state(client, false);
	return 0;
}

static int apds9802als_resume(struct device *dev)
{
	struct i2c_client *client = to_i2c_client(dev);

	als_set_power_state(client, true);
	return 0;
}

static UNIVERSAL_DEV_PM_OPS(apds9802als_pm_ops, apds9802als_suspend,
	apds9802als_resume, NULL);

#define APDS9802ALS_PM_OPS (&apds9802als_pm_ops)

#else	/* CONFIG_PM */
#define APDS9802ALS_PM_OPS NULL
#endif	/* CONFIG_PM */

static const struct i2c_device_id apds9802als_id[] = {
	{ DRIVER_NAME, 0 },
	{ }
};

MODULE_DEVICE_TABLE(i2c, apds9802als_id);

static struct i2c_driver apds9802als_driver = {
	.driver = {
		.name = DRIVER_NAME,
		.pm = APDS9802ALS_PM_OPS,
	},
	.probe = apds9802als_probe,
	.remove = apds9802als_remove,
	.id_table = apds9802als_id,
};

module_i2c_driver(apds9802als_driver);

MODULE_AUTHOR("Anantha Narayanan <Anantha.Narayanan@intel.com");
MODULE_DESCRIPTION("Avago apds9802als ALS Driver");
MODULE_LICENSE("GPL v2");