mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 01:51:53 +00:00
d21ed22ba7
MAX31730 is a 3-Channel Remote Temperature Sensor. Signed-off-by: Guenter Roeck <linux@roeck-us.net>
441 lines
11 KiB
C
441 lines
11 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* Driver for MAX31730 3-Channel Remote Temperature Sensor
|
|
*
|
|
* Copyright (c) 2019 Guenter Roeck <linux@roeck-us.net>
|
|
*/
|
|
|
|
#include <linux/bits.h>
|
|
#include <linux/err.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/init.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/of.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Addresses scanned */
|
|
static const unsigned short normal_i2c[] = { 0x1c, 0x1d, 0x1e, 0x1f, 0x4c,
|
|
0x4d, 0x4e, 0x4f, I2C_CLIENT_END };
|
|
|
|
/* The MAX31730 registers */
|
|
#define MAX31730_REG_TEMP 0x00
|
|
#define MAX31730_REG_CONF 0x13
|
|
#define MAX31730_STOP BIT(7)
|
|
#define MAX31730_EXTRANGE BIT(1)
|
|
#define MAX31730_REG_TEMP_OFFSET 0x16
|
|
#define MAX31730_TEMP_OFFSET_BASELINE 0x77
|
|
#define MAX31730_REG_OFFSET_ENABLE 0x17
|
|
#define MAX31730_REG_TEMP_MAX 0x20
|
|
#define MAX31730_REG_TEMP_MIN 0x30
|
|
#define MAX31730_REG_STATUS_HIGH 0x32
|
|
#define MAX31730_REG_STATUS_LOW 0x33
|
|
#define MAX31730_REG_CHANNEL_ENABLE 0x35
|
|
#define MAX31730_REG_TEMP_FAULT 0x36
|
|
|
|
#define MAX31730_REG_MFG_ID 0x50
|
|
#define MAX31730_MFG_ID 0x4d
|
|
#define MAX31730_REG_MFG_REV 0x51
|
|
#define MAX31730_MFG_REV 0x01
|
|
|
|
#define MAX31730_TEMP_MIN (-128000)
|
|
#define MAX31730_TEMP_MAX 127937
|
|
|
|
/* Each client has this additional data */
|
|
struct max31730_data {
|
|
struct i2c_client *client;
|
|
u8 orig_conf;
|
|
u8 current_conf;
|
|
u8 offset_enable;
|
|
u8 channel_enable;
|
|
};
|
|
|
|
/*-----------------------------------------------------------------------*/
|
|
|
|
static inline long max31730_reg_to_mc(s16 temp)
|
|
{
|
|
return DIV_ROUND_CLOSEST((temp >> 4) * 1000, 16);
|
|
}
|
|
|
|
static int max31730_write_config(struct max31730_data *data, u8 set_mask,
|
|
u8 clr_mask)
|
|
{
|
|
u8 value;
|
|
|
|
clr_mask |= MAX31730_EXTRANGE;
|
|
value = data->current_conf & ~clr_mask;
|
|
value |= set_mask;
|
|
|
|
if (data->current_conf != value) {
|
|
s32 err;
|
|
|
|
err = i2c_smbus_write_byte_data(data->client, MAX31730_REG_CONF,
|
|
value);
|
|
if (err)
|
|
return err;
|
|
data->current_conf = value;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max31730_set_enable(struct i2c_client *client, int reg,
|
|
u8 *confdata, int channel, bool enable)
|
|
{
|
|
u8 regval = *confdata;
|
|
int err;
|
|
|
|
if (enable)
|
|
regval |= BIT(channel);
|
|
else
|
|
regval &= ~BIT(channel);
|
|
|
|
if (regval != *confdata) {
|
|
err = i2c_smbus_write_byte_data(client, reg, regval);
|
|
if (err)
|
|
return err;
|
|
*confdata = regval;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int max31730_set_offset_enable(struct max31730_data *data, int channel,
|
|
bool enable)
|
|
{
|
|
return max31730_set_enable(data->client, MAX31730_REG_OFFSET_ENABLE,
|
|
&data->offset_enable, channel, enable);
|
|
}
|
|
|
|
static int max31730_set_channel_enable(struct max31730_data *data, int channel,
|
|
bool enable)
|
|
{
|
|
return max31730_set_enable(data->client, MAX31730_REG_CHANNEL_ENABLE,
|
|
&data->channel_enable, channel, enable);
|
|
}
|
|
|
|
static int max31730_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct max31730_data *data = dev_get_drvdata(dev);
|
|
int regval, reg, offset;
|
|
|
|
if (type != hwmon_temp)
|
|
return -EINVAL;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
if (!(data->channel_enable & BIT(channel)))
|
|
return -ENODATA;
|
|
reg = MAX31730_REG_TEMP + (channel * 2);
|
|
break;
|
|
case hwmon_temp_max:
|
|
reg = MAX31730_REG_TEMP_MAX + (channel * 2);
|
|
break;
|
|
case hwmon_temp_min:
|
|
reg = MAX31730_REG_TEMP_MIN;
|
|
break;
|
|
case hwmon_temp_enable:
|
|
*val = !!(data->channel_enable & BIT(channel));
|
|
return 0;
|
|
case hwmon_temp_offset:
|
|
if (!channel)
|
|
return -EINVAL;
|
|
if (!(data->offset_enable & BIT(channel))) {
|
|
*val = 0;
|
|
return 0;
|
|
}
|
|
offset = i2c_smbus_read_byte_data(data->client,
|
|
MAX31730_REG_TEMP_OFFSET);
|
|
if (offset < 0)
|
|
return offset;
|
|
*val = (offset - MAX31730_TEMP_OFFSET_BASELINE) * 125;
|
|
return 0;
|
|
case hwmon_temp_fault:
|
|
regval = i2c_smbus_read_byte_data(data->client,
|
|
MAX31730_REG_TEMP_FAULT);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = !!(regval & BIT(channel));
|
|
return 0;
|
|
case hwmon_temp_min_alarm:
|
|
regval = i2c_smbus_read_byte_data(data->client,
|
|
MAX31730_REG_STATUS_LOW);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = !!(regval & BIT(channel));
|
|
return 0;
|
|
case hwmon_temp_max_alarm:
|
|
regval = i2c_smbus_read_byte_data(data->client,
|
|
MAX31730_REG_STATUS_HIGH);
|
|
if (regval < 0)
|
|
return regval;
|
|
*val = !!(regval & BIT(channel));
|
|
return 0;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
regval = i2c_smbus_read_word_swapped(data->client, reg);
|
|
if (regval < 0)
|
|
return regval;
|
|
|
|
*val = max31730_reg_to_mc(regval);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max31730_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
struct max31730_data *data = dev_get_drvdata(dev);
|
|
int reg, err;
|
|
|
|
if (type != hwmon_temp)
|
|
return -EINVAL;
|
|
|
|
switch (attr) {
|
|
case hwmon_temp_max:
|
|
reg = MAX31730_REG_TEMP_MAX + channel * 2;
|
|
break;
|
|
case hwmon_temp_min:
|
|
reg = MAX31730_REG_TEMP_MIN;
|
|
break;
|
|
case hwmon_temp_enable:
|
|
if (val != 0 && val != 1)
|
|
return -EINVAL;
|
|
return max31730_set_channel_enable(data, channel, val);
|
|
case hwmon_temp_offset:
|
|
val = clamp_val(val, -14875, 17000) + 14875;
|
|
val = DIV_ROUND_CLOSEST(val, 125);
|
|
err = max31730_set_offset_enable(data, channel,
|
|
val != MAX31730_TEMP_OFFSET_BASELINE);
|
|
if (err)
|
|
return err;
|
|
return i2c_smbus_write_byte_data(data->client,
|
|
MAX31730_REG_TEMP_OFFSET, val);
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = clamp_val(val, MAX31730_TEMP_MIN, MAX31730_TEMP_MAX);
|
|
val = DIV_ROUND_CLOSEST(val << 4, 1000) << 4;
|
|
|
|
return i2c_smbus_write_word_swapped(data->client, reg, (u16)val);
|
|
}
|
|
|
|
static umode_t max31730_is_visible(const void *data,
|
|
enum hwmon_sensor_types type,
|
|
u32 attr, int channel)
|
|
{
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
case hwmon_temp_fault:
|
|
return 0444;
|
|
case hwmon_temp_min:
|
|
return channel ? 0444 : 0644;
|
|
case hwmon_temp_offset:
|
|
case hwmon_temp_enable:
|
|
case hwmon_temp_max:
|
|
return 0644;
|
|
}
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static const struct hwmon_channel_info *max31730_info[] = {
|
|
HWMON_CHANNEL_INFO(chip,
|
|
HWMON_C_REGISTER_TZ),
|
|
HWMON_CHANNEL_INFO(temp,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_ENABLE |
|
|
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
|
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
|
HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
|
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
|
HWMON_T_FAULT,
|
|
HWMON_T_INPUT | HWMON_T_MIN | HWMON_T_MAX |
|
|
HWMON_T_OFFSET | HWMON_T_ENABLE |
|
|
HWMON_T_MIN_ALARM | HWMON_T_MAX_ALARM |
|
|
HWMON_T_FAULT
|
|
),
|
|
NULL
|
|
};
|
|
|
|
static const struct hwmon_ops max31730_hwmon_ops = {
|
|
.is_visible = max31730_is_visible,
|
|
.read = max31730_read,
|
|
.write = max31730_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info max31730_chip_info = {
|
|
.ops = &max31730_hwmon_ops,
|
|
.info = max31730_info,
|
|
};
|
|
|
|
static void max31730_remove(void *data)
|
|
{
|
|
struct max31730_data *max31730 = data;
|
|
struct i2c_client *client = max31730->client;
|
|
|
|
i2c_smbus_write_byte_data(client, MAX31730_REG_CONF,
|
|
max31730->orig_conf);
|
|
}
|
|
|
|
static int
|
|
max31730_probe(struct i2c_client *client, const struct i2c_device_id *id)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct max31730_data *data;
|
|
int status, err;
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EIO;
|
|
|
|
data = devm_kzalloc(dev, sizeof(struct max31730_data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
data->client = client;
|
|
|
|
/* Cache original configuration and enable status */
|
|
status = i2c_smbus_read_byte_data(client, MAX31730_REG_CHANNEL_ENABLE);
|
|
if (status < 0)
|
|
return status;
|
|
data->channel_enable = status;
|
|
|
|
status = i2c_smbus_read_byte_data(client, MAX31730_REG_OFFSET_ENABLE);
|
|
if (status < 0)
|
|
return status;
|
|
data->offset_enable = status;
|
|
|
|
status = i2c_smbus_read_byte_data(client, MAX31730_REG_CONF);
|
|
if (status < 0)
|
|
return status;
|
|
data->orig_conf = status;
|
|
data->current_conf = status;
|
|
|
|
err = max31730_write_config(data,
|
|
data->channel_enable ? 0 : MAX31730_STOP,
|
|
data->channel_enable ? MAX31730_STOP : 0);
|
|
if (err)
|
|
return err;
|
|
|
|
dev_set_drvdata(dev, data);
|
|
|
|
err = devm_add_action_or_reset(dev, max31730_remove, data);
|
|
if (err)
|
|
return err;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name,
|
|
data,
|
|
&max31730_chip_info,
|
|
NULL);
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id max31730_ids[] = {
|
|
{ "max31730", 0, },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max31730_ids);
|
|
|
|
static const struct of_device_id __maybe_unused max31730_of_match[] = {
|
|
{
|
|
.compatible = "maxim,max31730",
|
|
},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max31730_of_match);
|
|
|
|
static bool max31730_check_reg_temp(struct i2c_client *client,
|
|
int reg)
|
|
{
|
|
int regval;
|
|
|
|
regval = i2c_smbus_read_byte_data(client, reg + 1);
|
|
return regval < 0 || (regval & 0x0f);
|
|
}
|
|
|
|
/* Return 0 if detection is successful, -ENODEV otherwise */
|
|
static int max31730_detect(struct i2c_client *client,
|
|
struct i2c_board_info *info)
|
|
{
|
|
struct i2c_adapter *adapter = client->adapter;
|
|
int regval;
|
|
int i;
|
|
|
|
if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA |
|
|
I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -ENODEV;
|
|
|
|
regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_ID);
|
|
if (regval != MAX31730_MFG_ID)
|
|
return -ENODEV;
|
|
regval = i2c_smbus_read_byte_data(client, MAX31730_REG_MFG_REV);
|
|
if (regval != MAX31730_MFG_REV)
|
|
return -ENODEV;
|
|
|
|
/* lower 4 bit of temperature and limit registers must be 0 */
|
|
if (max31730_check_reg_temp(client, MAX31730_REG_TEMP_MIN))
|
|
return -ENODEV;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (max31730_check_reg_temp(client, MAX31730_REG_TEMP + i * 2))
|
|
return -ENODEV;
|
|
if (max31730_check_reg_temp(client,
|
|
MAX31730_REG_TEMP_MAX + i * 2))
|
|
return -ENODEV;
|
|
}
|
|
|
|
strlcpy(info->type, "max31730", I2C_NAME_SIZE);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused max31730_suspend(struct device *dev)
|
|
{
|
|
struct max31730_data *data = dev_get_drvdata(dev);
|
|
|
|
return max31730_write_config(data, MAX31730_STOP, 0);
|
|
}
|
|
|
|
static int __maybe_unused max31730_resume(struct device *dev)
|
|
{
|
|
struct max31730_data *data = dev_get_drvdata(dev);
|
|
|
|
return max31730_write_config(data, 0, MAX31730_STOP);
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(max31730_pm_ops, max31730_suspend, max31730_resume);
|
|
|
|
static struct i2c_driver max31730_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "max31730",
|
|
.of_match_table = of_match_ptr(max31730_of_match),
|
|
.pm = &max31730_pm_ops,
|
|
},
|
|
.probe = max31730_probe,
|
|
.id_table = max31730_ids,
|
|
.detect = max31730_detect,
|
|
.address_list = normal_i2c,
|
|
};
|
|
|
|
module_i2c_driver(max31730_driver);
|
|
|
|
MODULE_AUTHOR("Guenter Roeck <linux@roeck-us.net>");
|
|
MODULE_DESCRIPTION("MAX31730 driver");
|
|
MODULE_LICENSE("GPL");
|