linux/drivers/iio/dac/vf610_dac.c
Uwe Kleine-König cf22fc5566 iio: dac: vf610: Convert to platform remove callback returning void
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new() which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().

Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230919174931.1417681-34-u.kleine-koenig@pengutronix.de
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
2023-09-23 15:06:55 +01:00

287 lines
6.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Freescale Vybrid vf610 DAC driver
*
* Copyright 2016 Toradex AG
*/
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/mod_devicetable.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <linux/iio/iio.h>
#include <linux/iio/sysfs.h>
#define VF610_DACx_STATCTRL 0x20
#define VF610_DAC_DACEN BIT(15)
#define VF610_DAC_DACRFS BIT(14)
#define VF610_DAC_LPEN BIT(11)
#define VF610_DAC_DAT0(x) ((x) & 0xFFF)
enum vf610_conversion_mode_sel {
VF610_DAC_CONV_HIGH_POWER,
VF610_DAC_CONV_LOW_POWER,
};
struct vf610_dac {
struct clk *clk;
struct device *dev;
enum vf610_conversion_mode_sel conv_mode;
void __iomem *regs;
struct mutex lock;
};
static void vf610_dac_init(struct vf610_dac *info)
{
int val;
info->conv_mode = VF610_DAC_CONV_LOW_POWER;
val = VF610_DAC_DACEN | VF610_DAC_DACRFS |
VF610_DAC_LPEN;
writel(val, info->regs + VF610_DACx_STATCTRL);
}
static void vf610_dac_exit(struct vf610_dac *info)
{
int val;
val = readl(info->regs + VF610_DACx_STATCTRL);
val &= ~VF610_DAC_DACEN;
writel(val, info->regs + VF610_DACx_STATCTRL);
}
static int vf610_set_conversion_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan,
unsigned int mode)
{
struct vf610_dac *info = iio_priv(indio_dev);
int val;
mutex_lock(&info->lock);
info->conv_mode = mode;
val = readl(info->regs + VF610_DACx_STATCTRL);
if (mode)
val |= VF610_DAC_LPEN;
else
val &= ~VF610_DAC_LPEN;
writel(val, info->regs + VF610_DACx_STATCTRL);
mutex_unlock(&info->lock);
return 0;
}
static int vf610_get_conversion_mode(struct iio_dev *indio_dev,
const struct iio_chan_spec *chan)
{
struct vf610_dac *info = iio_priv(indio_dev);
return info->conv_mode;
}
static const char * const vf610_conv_modes[] = { "high-power", "low-power" };
static const struct iio_enum vf610_conversion_mode = {
.items = vf610_conv_modes,
.num_items = ARRAY_SIZE(vf610_conv_modes),
.get = vf610_get_conversion_mode,
.set = vf610_set_conversion_mode,
};
static const struct iio_chan_spec_ext_info vf610_ext_info[] = {
IIO_ENUM("conversion_mode", IIO_SHARED_BY_DIR,
&vf610_conversion_mode),
{},
};
#define VF610_DAC_CHAN(_chan_type) { \
.type = (_chan_type), \
.output = 1, \
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
.ext_info = vf610_ext_info, \
}
static const struct iio_chan_spec vf610_dac_iio_channels[] = {
VF610_DAC_CHAN(IIO_VOLTAGE),
};
static int vf610_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2,
long mask)
{
struct vf610_dac *info = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
*val = VF610_DAC_DAT0(readl(info->regs));
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
/*
* DACRFS is always 1 for valid reference and typical
* reference voltage as per Vybrid datasheet is 3.3V
* from section 9.1.2.1 of Vybrid datasheet
*/
*val = 3300 /* mV */;
*val2 = 12;
return IIO_VAL_FRACTIONAL_LOG2;
default:
return -EINVAL;
}
}
static int vf610_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2,
long mask)
{
struct vf610_dac *info = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
mutex_lock(&info->lock);
writel(VF610_DAC_DAT0(val), info->regs);
mutex_unlock(&info->lock);
return 0;
default:
return -EINVAL;
}
}
static const struct iio_info vf610_dac_iio_info = {
.read_raw = &vf610_read_raw,
.write_raw = &vf610_write_raw,
};
static const struct of_device_id vf610_dac_match[] = {
{ .compatible = "fsl,vf610-dac", },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, vf610_dac_match);
static int vf610_dac_probe(struct platform_device *pdev)
{
struct iio_dev *indio_dev;
struct vf610_dac *info;
int ret;
indio_dev = devm_iio_device_alloc(&pdev->dev,
sizeof(struct vf610_dac));
if (!indio_dev) {
dev_err(&pdev->dev, "Failed allocating iio device\n");
return -ENOMEM;
}
info = iio_priv(indio_dev);
info->dev = &pdev->dev;
info->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(info->regs))
return PTR_ERR(info->regs);
info->clk = devm_clk_get(&pdev->dev, "dac");
if (IS_ERR(info->clk)) {
dev_err(&pdev->dev, "Failed getting clock, err = %ld\n",
PTR_ERR(info->clk));
return PTR_ERR(info->clk);
}
platform_set_drvdata(pdev, indio_dev);
indio_dev->name = dev_name(&pdev->dev);
indio_dev->info = &vf610_dac_iio_info;
indio_dev->modes = INDIO_DIRECT_MODE;
indio_dev->channels = vf610_dac_iio_channels;
indio_dev->num_channels = ARRAY_SIZE(vf610_dac_iio_channels);
mutex_init(&info->lock);
ret = clk_prepare_enable(info->clk);
if (ret) {
dev_err(&pdev->dev,
"Could not prepare or enable the clock\n");
return ret;
}
vf610_dac_init(info);
ret = iio_device_register(indio_dev);
if (ret) {
dev_err(&pdev->dev, "Couldn't register the device\n");
goto error_iio_device_register;
}
return 0;
error_iio_device_register:
vf610_dac_exit(info);
clk_disable_unprepare(info->clk);
return ret;
}
static void vf610_dac_remove(struct platform_device *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct vf610_dac *info = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
vf610_dac_exit(info);
clk_disable_unprepare(info->clk);
}
static int vf610_dac_suspend(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct vf610_dac *info = iio_priv(indio_dev);
vf610_dac_exit(info);
clk_disable_unprepare(info->clk);
return 0;
}
static int vf610_dac_resume(struct device *dev)
{
struct iio_dev *indio_dev = dev_get_drvdata(dev);
struct vf610_dac *info = iio_priv(indio_dev);
int ret;
ret = clk_prepare_enable(info->clk);
if (ret)
return ret;
vf610_dac_init(info);
return 0;
}
static DEFINE_SIMPLE_DEV_PM_OPS(vf610_dac_pm_ops, vf610_dac_suspend,
vf610_dac_resume);
static struct platform_driver vf610_dac_driver = {
.probe = vf610_dac_probe,
.remove_new = vf610_dac_remove,
.driver = {
.name = "vf610-dac",
.of_match_table = vf610_dac_match,
.pm = pm_sleep_ptr(&vf610_dac_pm_ops),
},
};
module_platform_driver(vf610_dac_driver);
MODULE_AUTHOR("Sanchayan Maity <sanchayan.maity@toradex.com>");
MODULE_DESCRIPTION("Freescale VF610 DAC driver");
MODULE_LICENSE("GPL v2");