Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-11 14:42:24 +00:00
Code Issues Packages Projects Releases Wiki Activity
53ab1c6498
linux/drivers/infiniband/hw/qib/qib.h
Mike Marciniszyn 53ab1c6498 IB/qib: Correct nfreectxts for multiple HCAs 
The code that was recently introduced to report the number
of free contexts is flawed for multiple HCAs:

       /* Return the number of free user ports (contexts) available. */
       return scnprintf(buf, PAGE_SIZE, "%u\n", dd->cfgctxts -
                dd->first_user_ctxt - (u32)qib_stats.sps_ctxts);

The qib_stats is global to the module, not per HCA, so the code is broken
for multiple HCAs.

This patch adds a qib_devdata field, freectxts, that reflects the free
contexts for this HCA.

Signed-off-by: Mike Marciniszyn <mike.marciniszyn@qlogic.com>
Reviewed-by: Ram Vepa <ram.vepa@qlogic.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-10-06 09:33:35 -07:00

1452 lines
48 KiB
C
Raw Blame History

#ifndef _QIB_KERNEL_H
#define _QIB_KERNEL_H
/*
* Copyright (c) 2006, 2007, 2008, 2009, 2010 QLogic Corporation.
* All rights reserved.
* Copyright (c) 2003, 2004, 2005, 2006 PathScale, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
/*
* This header file is the base header file for qlogic_ib kernel code
* qib_user.h serves a similar purpose for user code.
*/
#include <linux/interrupt.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/mutex.h>
#include <linux/list.h>
#include <linux/scatterlist.h>
#include <linux/slab.h>
#include <linux/io.h>
#include <linux/fs.h>
#include <linux/completion.h>
#include <linux/kref.h>
#include <linux/sched.h>
#include "qib_common.h"
#include "qib_verbs.h"
/* only s/w major version of QLogic_IB we can handle */
#define QIB_CHIP_VERS_MAJ 2U
/* don't care about this except printing */
#define QIB_CHIP_VERS_MIN 0U
/* The Organization Unique Identifier (Mfg code), and its position in GUID */
#define QIB_OUI 0x001175
#define QIB_OUI_LSB 40
/*
* per driver stats, either not device nor port-specific, or
* summed over all of the devices and ports.
* They are described by name via ipathfs filesystem, so layout
* and number of elements can change without breaking compatibility.
* If members are added or deleted qib_statnames[] in qib_fs.c must
* change to match.
*/
struct qlogic_ib_stats {
__u64 sps_ints; /* number of interrupts handled */
__u64 sps_errints; /* number of error interrupts */
__u64 sps_txerrs; /* tx-related packet errors */
__u64 sps_rcverrs; /* non-crc rcv packet errors */
__u64 sps_hwerrs; /* hardware errors reported (parity, etc.) */
__u64 sps_nopiobufs; /* no pio bufs avail from kernel */
__u64 sps_ctxts; /* number of contexts currently open */
__u64 sps_lenerrs; /* number of kernel packets where RHF != LRH len */
__u64 sps_buffull;
__u64 sps_hdrfull;
};
extern struct qlogic_ib_stats qib_stats;
extern struct pci_error_handlers qib_pci_err_handler;
extern struct pci_driver qib_driver;
#define QIB_CHIP_SWVERSION QIB_CHIP_VERS_MAJ
/*
* First-cut critierion for "device is active" is
* two thousand dwords combined Tx, Rx traffic per
* 5-second interval. SMA packets are 64 dwords,
* and occur "a few per second", presumably each way.
*/
#define QIB_TRAFFIC_ACTIVE_THRESHOLD (2000)
/*
* Struct used to indicate which errors are logged in each of the
* error-counters that are logged to EEPROM. A counter is incremented
* _once_ (saturating at 255) for each event with any bits set in
* the error or hwerror register masks below.
*/
#define QIB_EEP_LOG_CNT (4)
struct qib_eep_log_mask {
u64 errs_to_log;
u64 hwerrs_to_log;
};
/*
* Below contains all data related to a single context (formerly called port).
*/
struct qib_ctxtdata {
void **rcvegrbuf;
dma_addr_t *rcvegrbuf_phys;
/* rcvhdrq base, needs mmap before useful */
void *rcvhdrq;
/* kernel virtual address where hdrqtail is updated */
void *rcvhdrtail_kvaddr;
/*
* temp buffer for expected send setup, allocated at open, instead
* of each setup call
*/
void *tid_pg_list;
/*
* Shared page for kernel to signal user processes that send buffers
* need disarming. The process should call QIB_CMD_DISARM_BUFS
* or QIB_CMD_ACK_EVENT with IPATH_EVENT_DISARM_BUFS set.
*/
unsigned long *user_event_mask;
/* when waiting for rcv or pioavail */
wait_queue_head_t wait;
/*
* rcvegr bufs base, physical, must fit
* in 44 bits so 32 bit programs mmap64 44 bit works)
*/
dma_addr_t rcvegr_phys;
/* mmap of hdrq, must fit in 44 bits */
dma_addr_t rcvhdrq_phys;
dma_addr_t rcvhdrqtailaddr_phys;
/*
* number of opens (including slave sub-contexts) on this instance
* (ignoring forks, dup, etc. for now)
*/
int cnt;
/*
* how much space to leave at start of eager TID entries for
* protocol use, on each TID
*/
/* instead of calculating it */
unsigned ctxt;
/* non-zero if ctxt is being shared. */
u16 subctxt_cnt;
/* non-zero if ctxt is being shared. */
u16 subctxt_id;
/* number of eager TID entries. */
u16 rcvegrcnt;
/* index of first eager TID entry. */
u16 rcvegr_tid_base;
/* number of pio bufs for this ctxt (all procs, if shared) */
u32 piocnt;
/* first pio buffer for this ctxt */
u32 pio_base;
/* chip offset of PIO buffers for this ctxt */
u32 piobufs;
/* how many alloc_pages() chunks in rcvegrbuf_pages */
u32 rcvegrbuf_chunks;
/* how many egrbufs per chunk */
u32 rcvegrbufs_perchunk;
/* order for rcvegrbuf_pages */
size_t rcvegrbuf_size;
/* rcvhdrq size (for freeing) */
size_t rcvhdrq_size;
/* per-context flags for fileops/intr communication */
unsigned long flag;
/* next expected TID to check when looking for free */
u32 tidcursor;
/* WAIT_RCV that timed out, no interrupt */
u32 rcvwait_to;
/* WAIT_PIO that timed out, no interrupt */
u32 piowait_to;
/* WAIT_RCV already happened, no wait */
u32 rcvnowait;
/* WAIT_PIO already happened, no wait */
u32 pionowait;
/* total number of polled urgent packets */
u32 urgent;
/* saved total number of polled urgent packets for poll edge trigger */
u32 urgent_poll;
/* pid of process using this ctxt */
pid_t pid;
pid_t subpid[QLOGIC_IB_MAX_SUBCTXT];
/* same size as task_struct .comm[], command that opened context */
char comm[16];
/* pkeys set by this use of this ctxt */
u16 pkeys[4];
/* so file ops can get at unit */
struct qib_devdata *dd;
/* so funcs that need physical port can get it easily */
struct qib_pportdata *ppd;
/* A page of memory for rcvhdrhead, rcvegrhead, rcvegrtail * N */
void *subctxt_uregbase;
/* An array of pages for the eager receive buffers * N */
void *subctxt_rcvegrbuf;
/* An array of pages for the eager header queue entries * N */
void *subctxt_rcvhdr_base;
/* The version of the library which opened this ctxt */
u32 userversion;
/* Bitmask of active slaves */
u32 active_slaves;
/* Type of packets or conditions we want to poll for */
u16 poll_type;
/* receive packet sequence counter */
u8 seq_cnt;
u8 redirect_seq_cnt;
/* ctxt rcvhdrq head offset */
u32 head;
u32 pkt_count;
/* QPs waiting for context processing */
struct list_head qp_wait_list;
};
struct qib_sge_state;
struct qib_sdma_txreq {
int flags;
int sg_count;
dma_addr_t addr;
void (*callback)(struct qib_sdma_txreq *, int);
u16 start_idx; /* sdma private */
u16 next_descq_idx; /* sdma private */
struct list_head list; /* sdma private */
};
struct qib_sdma_desc {
__le64 qw[2];
};
struct qib_verbs_txreq {
struct qib_sdma_txreq txreq;
struct qib_qp *qp;
struct qib_swqe *wqe;
u32 dwords;
u16 hdr_dwords;
u16 hdr_inx;
struct qib_pio_header *align_buf;
struct qib_mregion *mr;
struct qib_sge_state *ss;
};
#define QIB_SDMA_TXREQ_F_USELARGEBUF 0x1
#define QIB_SDMA_TXREQ_F_HEADTOHOST 0x2
#define QIB_SDMA_TXREQ_F_INTREQ 0x4
#define QIB_SDMA_TXREQ_F_FREEBUF 0x8
#define QIB_SDMA_TXREQ_F_FREEDESC 0x10
#define QIB_SDMA_TXREQ_S_OK 0
#define QIB_SDMA_TXREQ_S_SENDERROR 1
#define QIB_SDMA_TXREQ_S_ABORTED 2
#define QIB_SDMA_TXREQ_S_SHUTDOWN 3
/*
* Get/Set IB link-level config parameters for f_get/set_ib_cfg()
* Mostly for MADs that set or query link parameters, also ipath
* config interfaces
*/
#define QIB_IB_CFG_LIDLMC 0 /* LID (LS16b) and Mask (MS16b) */
#define QIB_IB_CFG_LWID_ENB 2 /* allowed Link-width */
#define QIB_IB_CFG_LWID 3 /* currently active Link-width */
#define QIB_IB_CFG_SPD_ENB 4 /* allowed Link speeds */
#define QIB_IB_CFG_SPD 5 /* current Link spd */
#define QIB_IB_CFG_RXPOL_ENB 6 /* Auto-RX-polarity enable */
#define QIB_IB_CFG_LREV_ENB 7 /* Auto-Lane-reversal enable */
#define QIB_IB_CFG_LINKLATENCY 8 /* Link Latency (IB1.2 only) */
#define QIB_IB_CFG_HRTBT 9 /* IB heartbeat off/enable/auto; DDR/QDR only */
#define QIB_IB_CFG_OP_VLS 10 /* operational VLs */
#define QIB_IB_CFG_VL_HIGH_CAP 11 /* num of VL high priority weights */
#define QIB_IB_CFG_VL_LOW_CAP 12 /* num of VL low priority weights */
#define QIB_IB_CFG_OVERRUN_THRESH 13 /* IB overrun threshold */
#define QIB_IB_CFG_PHYERR_THRESH 14 /* IB PHY error threshold */
#define QIB_IB_CFG_LINKDEFAULT 15 /* IB link default (sleep/poll) */
#define QIB_IB_CFG_PKEYS 16 /* update partition keys */
#define QIB_IB_CFG_MTU 17 /* update MTU in IBC */
#define QIB_IB_CFG_LSTATE 18 /* update linkcmd and linkinitcmd in IBC */
#define QIB_IB_CFG_VL_HIGH_LIMIT 19
#define QIB_IB_CFG_PMA_TICKS 20 /* PMA sample tick resolution */
#define QIB_IB_CFG_PORT 21 /* switch port we are connected to */
/*
* for CFG_LSTATE: LINKCMD in upper 16 bits, LINKINITCMD in lower 16
* IB_LINKINITCMD_POLL and SLEEP are also used as set/get values for
* QIB_IB_CFG_LINKDEFAULT cmd
*/
#define IB_LINKCMD_DOWN (0 << 16)
#define IB_LINKCMD_ARMED (1 << 16)
#define IB_LINKCMD_ACTIVE (2 << 16)
#define IB_LINKINITCMD_NOP 0
#define IB_LINKINITCMD_POLL 1
#define IB_LINKINITCMD_SLEEP 2
#define IB_LINKINITCMD_DISABLE 3
/*
* valid states passed to qib_set_linkstate() user call
*/
#define QIB_IB_LINKDOWN 0
#define QIB_IB_LINKARM 1
#define QIB_IB_LINKACTIVE 2
#define QIB_IB_LINKDOWN_ONLY 3
#define QIB_IB_LINKDOWN_SLEEP 4
#define QIB_IB_LINKDOWN_DISABLE 5
/*
* These 7 values (SDR, DDR, and QDR may be ORed for auto-speed
* negotiation) are used for the 3rd argument to path_f_set_ib_cfg
* with cmd QIB_IB_CFG_SPD_ENB, by direct calls or via sysfs. They
* are also the the possible values for qib_link_speed_enabled and active
* The values were chosen to match values used within the IB spec.
*/
#define QIB_IB_SDR 1
#define QIB_IB_DDR 2
#define QIB_IB_QDR 4
#define QIB_DEFAULT_MTU 4096
/* max number of IB ports supported per HCA */
#define QIB_MAX_IB_PORTS 2
/*
* Possible IB config parameters for f_get/set_ib_table()
*/
#define QIB_IB_TBL_VL_HIGH_ARB 1 /* Get/set VL high priority weights */
#define QIB_IB_TBL_VL_LOW_ARB 2 /* Get/set VL low priority weights */
/*
* Possible "operations" for f_rcvctrl(ppd, op, ctxt)
* these are bits so they can be combined, e.g.
* QIB_RCVCTRL_INTRAVAIL_ENB | QIB_RCVCTRL_CTXT_ENB
*/
#define QIB_RCVCTRL_TAILUPD_ENB 0x01
#define QIB_RCVCTRL_TAILUPD_DIS 0x02
#define QIB_RCVCTRL_CTXT_ENB 0x04
#define QIB_RCVCTRL_CTXT_DIS 0x08
#define QIB_RCVCTRL_INTRAVAIL_ENB 0x10
#define QIB_RCVCTRL_INTRAVAIL_DIS 0x20
#define QIB_RCVCTRL_PKEY_ENB 0x40 /* Note, default is enabled */
#define QIB_RCVCTRL_PKEY_DIS 0x80
#define QIB_RCVCTRL_BP_ENB 0x0100
#define QIB_RCVCTRL_BP_DIS 0x0200
#define QIB_RCVCTRL_TIDFLOW_ENB 0x0400
#define QIB_RCVCTRL_TIDFLOW_DIS 0x0800
/*
* Possible "operations" for f_sendctrl(ppd, op, var)
* these are bits so they can be combined, e.g.
* QIB_SENDCTRL_BUFAVAIL_ENB | QIB_SENDCTRL_ENB
* Some operations (e.g. DISARM, ABORT) are known to
* be "one-shot", so do not modify shadow.
*/
#define QIB_SENDCTRL_DISARM (0x1000)
#define QIB_SENDCTRL_DISARM_BUF(bufn) ((bufn) | QIB_SENDCTRL_DISARM)
/* available (0x2000) */
#define QIB_SENDCTRL_AVAIL_DIS (0x4000)
#define QIB_SENDCTRL_AVAIL_ENB (0x8000)
#define QIB_SENDCTRL_AVAIL_BLIP (0x10000)
#define QIB_SENDCTRL_SEND_DIS (0x20000)
#define QIB_SENDCTRL_SEND_ENB (0x40000)
#define QIB_SENDCTRL_FLUSH (0x80000)
#define QIB_SENDCTRL_CLEAR (0x100000)
#define QIB_SENDCTRL_DISARM_ALL (0x200000)
/*
* These are the generic indices for requesting per-port
* counter values via the f_portcntr function. They
* are always returned as 64 bit values, although most
* are 32 bit counters.
*/
/* send-related counters */
#define QIBPORTCNTR_PKTSEND 0U
#define QIBPORTCNTR_WORDSEND 1U
#define QIBPORTCNTR_PSXMITDATA 2U
#define QIBPORTCNTR_PSXMITPKTS 3U
#define QIBPORTCNTR_PSXMITWAIT 4U
#define QIBPORTCNTR_SENDSTALL 5U
/* receive-related counters */
#define QIBPORTCNTR_PKTRCV 6U
#define QIBPORTCNTR_PSRCVDATA 7U
#define QIBPORTCNTR_PSRCVPKTS 8U
#define QIBPORTCNTR_RCVEBP 9U
#define QIBPORTCNTR_RCVOVFL 10U
#define QIBPORTCNTR_WORDRCV 11U
/* IB link related error counters */
#define QIBPORTCNTR_RXLOCALPHYERR 12U
#define QIBPORTCNTR_RXVLERR 13U
#define QIBPORTCNTR_ERRICRC 14U
#define QIBPORTCNTR_ERRVCRC 15U
#define QIBPORTCNTR_ERRLPCRC 16U
#define QIBPORTCNTR_BADFORMAT 17U
#define QIBPORTCNTR_ERR_RLEN 18U
#define QIBPORTCNTR_IBSYMBOLERR 19U
#define QIBPORTCNTR_INVALIDRLEN 20U
#define QIBPORTCNTR_UNSUPVL 21U
#define QIBPORTCNTR_EXCESSBUFOVFL 22U
#define QIBPORTCNTR_ERRLINK 23U
#define QIBPORTCNTR_IBLINKDOWN 24U
#define QIBPORTCNTR_IBLINKERRRECOV 25U
#define QIBPORTCNTR_LLI 26U
/* other error counters */
#define QIBPORTCNTR_RXDROPPKT 27U
#define QIBPORTCNTR_VL15PKTDROP 28U
#define QIBPORTCNTR_ERRPKEY 29U
#define QIBPORTCNTR_KHDROVFL 30U
/* sampling counters (these are actually control registers) */
#define QIBPORTCNTR_PSINTERVAL 31U
#define QIBPORTCNTR_PSSTART 32U
#define QIBPORTCNTR_PSSTAT 33U
/* how often we check for packet activity for "power on hours (in seconds) */
#define ACTIVITY_TIMER 5
/* Below is an opaque struct. Each chip (device) can maintain
* private data needed for its operation, but not germane to the
* rest of the driver. For convenience, we define another that
* is chip-specific, per-port
*/
struct qib_chip_specific;
struct qib_chipport_specific;
enum qib_sdma_states {
qib_sdma_state_s00_hw_down,
qib_sdma_state_s10_hw_start_up_wait,
qib_sdma_state_s20_idle,
qib_sdma_state_s30_sw_clean_up_wait,
qib_sdma_state_s40_hw_clean_up_wait,
qib_sdma_state_s50_hw_halt_wait,
qib_sdma_state_s99_running,
};
enum qib_sdma_events {
qib_sdma_event_e00_go_hw_down,
qib_sdma_event_e10_go_hw_start,
qib_sdma_event_e20_hw_started,
qib_sdma_event_e30_go_running,
qib_sdma_event_e40_sw_cleaned,
qib_sdma_event_e50_hw_cleaned,
qib_sdma_event_e60_hw_halted,
qib_sdma_event_e70_go_idle,
qib_sdma_event_e7220_err_halted,
qib_sdma_event_e7322_err_halted,
qib_sdma_event_e90_timer_tick,
};
extern char *qib_sdma_state_names[];
extern char *qib_sdma_event_names[];
struct sdma_set_state_action {
unsigned op_enable:1;
unsigned op_intenable:1;
unsigned op_halt:1;
unsigned op_drain:1;
unsigned go_s99_running_tofalse:1;
unsigned go_s99_running_totrue:1;
};
struct qib_sdma_state {
struct kref kref;
struct completion comp;
enum qib_sdma_states current_state;
struct sdma_set_state_action *set_state_action;
unsigned current_op;
unsigned go_s99_running;
unsigned first_sendbuf;
unsigned last_sendbuf; /* really last +1 */
/* debugging/devel */
enum qib_sdma_states previous_state;
unsigned previous_op;
enum qib_sdma_events last_event;
};
struct xmit_wait {
struct timer_list timer;
u64 counter;
u8 flags;
struct cache {
u64 psxmitdata;
u64 psrcvdata;
u64 psxmitpkts;
u64 psrcvpkts;
u64 psxmitwait;
} counter_cache;
};
/*
* The structure below encapsulates data relevant to a physical IB Port.
* Current chips support only one such port, but the separation
* clarifies things a bit. Note that to conform to IB conventions,
* port-numbers are one-based. The first or only port is port1.
*/
struct qib_pportdata {
struct qib_ibport ibport_data;
struct qib_devdata *dd;
struct qib_chippport_specific *cpspec; /* chip-specific per-port */
struct kobject pport_kobj;
struct kobject sl2vl_kobj;
struct kobject diagc_kobj;
/* GUID for this interface, in network order */
__be64 guid;
/* QIB_POLL, etc. link-state specific flags, per port */
u32 lflags;
/* qib_lflags driver is waiting for */
u32 state_wanted;
spinlock_t lflags_lock;
/* number of (port-specific) interrupts for this port -- saturates... */
u32 int_counter;
/* ref count for each pkey */
atomic_t pkeyrefs[4];
/*
* this address is mapped readonly into user processes so they can
* get status cheaply, whenever they want. One qword of status per port
*/
u64 *statusp;
/* SendDMA related entries */
spinlock_t sdma_lock;
struct qib_sdma_state sdma_state;
unsigned long sdma_buf_jiffies;
struct qib_sdma_desc *sdma_descq;
u64 sdma_descq_added;
u64 sdma_descq_removed;
u16 sdma_descq_cnt;
u16 sdma_descq_tail;
u16 sdma_descq_head;
u16 sdma_next_intr;
u16 sdma_reset_wait;
u8 sdma_generation;
struct tasklet_struct sdma_sw_clean_up_task;
struct list_head sdma_activelist;
dma_addr_t sdma_descq_phys;
volatile __le64 *sdma_head_dma; /* DMA'ed by chip */
dma_addr_t sdma_head_phys;
wait_queue_head_t state_wait; /* for state_wanted */
/* HoL blocking for SMP replies */
unsigned hol_state;
struct timer_list hol_timer;
/*
* Shadow copies of registers; size indicates read access size.
* Most of them are readonly, but some are write-only register,
* where we manipulate the bits in the shadow copy, and then write
* the shadow copy to qlogic_ib.
*
* We deliberately make most of these 32 bits, since they have
* restricted range. For any that we read, we won't to generate 32
* bit accesses, since Opteron will generate 2 separate 32 bit HT
* transactions for a 64 bit read, and we want to avoid unnecessary
* bus transactions.
*/
/* This is the 64 bit group */
/* last ibcstatus. opaque outside chip-specific code */
u64 lastibcstat;
/* these are the "32 bit" regs */
/*
* the following two are 32-bit bitmasks, but {test,clear,set}_bit
* all expect bit fields to be "unsigned long"
*/
unsigned long p_rcvctrl; /* shadow per-port rcvctrl */
unsigned long p_sendctrl; /* shadow per-port sendctrl */
u32 ibmtu; /* The MTU programmed for this unit */
/*
* Current max size IB packet (in bytes) including IB headers, that
* we can send. Changes when ibmtu changes.
*/
u32 ibmaxlen;
/*
* ibmaxlen at init time, limited by chip and by receive buffer
* size. Not changed after init.
*/
u32 init_ibmaxlen;
/* LID programmed for this instance */
u16 lid;
/* list of pkeys programmed; 0 if not set */
u16 pkeys[4];
/* LID mask control */
u8 lmc;
u8 link_width_supported;
u8 link_speed_supported;
u8 link_width_enabled;
u8 link_speed_enabled;
u8 link_width_active;
u8 link_speed_active;
u8 vls_supported;
u8 vls_operational;
/* Rx Polarity inversion (compensate for ~tx on partner) */
u8 rx_pol_inv;
u8 hw_pidx; /* physical port index */
u8 port; /* IB port number and index into dd->pports - 1 */
u8 delay_mult;
/* used to override LED behavior */
u8 led_override; /* Substituted for normal value, if non-zero */
u16 led_override_timeoff; /* delta to next timer event */
u8 led_override_vals[2]; /* Alternates per blink-frame */
u8 led_override_phase; /* Just counts, LSB picks from vals[] */
atomic_t led_override_timer_active;
/* Used to flash LEDs in override mode */
struct timer_list led_override_timer;
struct xmit_wait cong_stats;
struct timer_list symerr_clear_timer;
};
/* Observers. Not to be taken lightly, possibly not to ship. */
/*
* If a diag read or write is to (bottom <= offset <= top),
* the "hoook" is called, allowing, e.g. shadows to be
* updated in sync with the driver. struct diag_observer
* is the "visible" part.
*/
struct diag_observer;
typedef int (*diag_hook) (struct qib_devdata *dd,
const struct diag_observer *op,
u32 offs, u64 *data, u64 mask, int only_32);
struct diag_observer {
diag_hook hook;
u32 bottom;
u32 top;
};
extern int qib_register_observer(struct qib_devdata *dd,
const struct diag_observer *op);
/* Only declared here, not defined. Private to diags */
struct diag_observer_list_elt;
/* device data struct now contains only "general per-device" info.
* fields related to a physical IB port are in a qib_pportdata struct,
* described above) while fields only used by a particular chip-type are in
* a qib_chipdata struct, whose contents are opaque to this file.
*/
struct qib_devdata {
struct qib_ibdev verbs_dev; /* must be first */
struct list_head list;
/* pointers to related structs for this device */
/* pci access data structure */
struct pci_dev *pcidev;
struct cdev *user_cdev;
struct cdev *diag_cdev;
struct device *user_device;
struct device *diag_device;
/* mem-mapped pointer to base of chip regs */
u64 __iomem *kregbase;
/* end of mem-mapped chip space excluding sendbuf and user regs */
u64 __iomem *kregend;
/* physical address of chip for io_remap, etc. */
resource_size_t physaddr;
/* qib_cfgctxts pointers */
struct qib_ctxtdata **rcd; /* Receive Context Data */
/* qib_pportdata, points to array of (physical) port-specific
* data structs, indexed by pidx (0..n-1)
*/
struct qib_pportdata *pport;
struct qib_chip_specific *cspec; /* chip-specific */
/* kvirt address of 1st 2k pio buffer */
void __iomem *pio2kbase;
/* kvirt address of 1st 4k pio buffer */
void __iomem *pio4kbase;
/* mem-mapped pointer to base of PIO buffers (if using WC PAT) */
void __iomem *piobase;
/* mem-mapped pointer to base of user chip regs (if using WC PAT) */
u64 __iomem *userbase;
void __iomem *piovl15base; /* base of VL15 buffers, if not WC */
/*
* points to area where PIOavail registers will be DMA'ed.
* Has to be on a page of it's own, because the page will be
* mapped into user program space. This copy is *ONLY* ever
* written by DMA, not by the driver! Need a copy per device
* when we get to multiple devices
*/
volatile __le64 *pioavailregs_dma; /* DMA'ed by chip */
/* physical address where updates occur */
dma_addr_t pioavailregs_phys;
/* device-specific implementations of functions needed by
* common code. Contrary to previous consensus, we can't
* really just point to a device-specific table, because we
* may need to "bend", e.g. *_f_put_tid
*/
/* fallback to alternate interrupt type if possible */
int (*f_intr_fallback)(struct qib_devdata *);
/* hard reset chip */
int (*f_reset)(struct qib_devdata *);
void (*f_quiet_serdes)(struct qib_pportdata *);
int (*f_bringup_serdes)(struct qib_pportdata *);
int (*f_early_init)(struct qib_devdata *);
void (*f_clear_tids)(struct qib_devdata *, struct qib_ctxtdata *);
void (*f_put_tid)(struct qib_devdata *, u64 __iomem*,
u32, unsigned long);
void (*f_cleanup)(struct qib_devdata *);
void (*f_setextled)(struct qib_pportdata *, u32);
/* fill out chip-specific fields */
int (*f_get_base_info)(struct qib_ctxtdata *, struct qib_base_info *);
/* free irq */
void (*f_free_irq)(struct qib_devdata *);
struct qib_message_header *(*f_get_msgheader)
(struct qib_devdata *, __le32 *);
void (*f_config_ctxts)(struct qib_devdata *);
int (*f_get_ib_cfg)(struct qib_pportdata *, int);
int (*f_set_ib_cfg)(struct qib_pportdata *, int, u32);
int (*f_set_ib_loopback)(struct qib_pportdata *, const char *);
int (*f_get_ib_table)(struct qib_pportdata *, int, void *);
int (*f_set_ib_table)(struct qib_pportdata *, int, void *);
u32 (*f_iblink_state)(u64);
u8 (*f_ibphys_portstate)(u64);
void (*f_xgxs_reset)(struct qib_pportdata *);
/* per chip actions needed for IB Link up/down changes */
int (*f_ib_updown)(struct qib_pportdata *, int, u64);
u32 __iomem *(*f_getsendbuf)(struct qib_pportdata *, u64, u32 *);
/* Read/modify/write of GPIO pins (potentially chip-specific */
int (*f_gpio_mod)(struct qib_devdata *dd, u32 out, u32 dir,
u32 mask);
/* Enable writes to config EEPROM (if supported) */
int (*f_eeprom_wen)(struct qib_devdata *dd, int wen);
/*
* modify rcvctrl shadow[s] and write to appropriate chip-regs.
* see above QIB_RCVCTRL_xxx_ENB/DIS for operations.
* (ctxt == -1) means "all contexts", only meaningful for
* clearing. Could remove if chip_spec shutdown properly done.
*/
void (*f_rcvctrl)(struct qib_pportdata *, unsigned int op,
int ctxt);
/* Read/modify/write sendctrl appropriately for op and port. */
void (*f_sendctrl)(struct qib_pportdata *, u32 op);
void (*f_set_intr_state)(struct qib_devdata *, u32);
void (*f_set_armlaunch)(struct qib_devdata *, u32);
void (*f_wantpiobuf_intr)(struct qib_devdata *, u32);
int (*f_late_initreg)(struct qib_devdata *);
int (*f_init_sdma_regs)(struct qib_pportdata *);
u16 (*f_sdma_gethead)(struct qib_pportdata *);
int (*f_sdma_busy)(struct qib_pportdata *);
void (*f_sdma_update_tail)(struct qib_pportdata *, u16);
void (*f_sdma_set_desc_cnt)(struct qib_pportdata *, unsigned);
void (*f_sdma_sendctrl)(struct qib_pportdata *, unsigned);
void (*f_sdma_hw_clean_up)(struct qib_pportdata *);
void (*f_sdma_hw_start_up)(struct qib_pportdata *);
void (*f_sdma_init_early)(struct qib_pportdata *);
void (*f_set_cntr_sample)(struct qib_pportdata *, u32, u32);
void (*f_update_usrhead)(struct qib_ctxtdata *, u64, u32, u32, u32);
u32 (*f_hdrqempty)(struct qib_ctxtdata *);
u64 (*f_portcntr)(struct qib_pportdata *, u32);
u32 (*f_read_cntrs)(struct qib_devdata *, loff_t, char **,
u64 **);
u32 (*f_read_portcntrs)(struct qib_devdata *, loff_t, u32,
char **, u64 **);
u32 (*f_setpbc_control)(struct qib_pportdata *, u32, u8, u8);
void (*f_initvl15_bufs)(struct qib_devdata *);
void (*f_init_ctxt)(struct qib_ctxtdata *);
void (*f_txchk_change)(struct qib_devdata *, u32, u32, u32,
struct qib_ctxtdata *);
void (*f_writescratch)(struct qib_devdata *, u32);
int (*f_tempsense_rd)(struct qib_devdata *, int regnum);
char *boardname; /* human readable board info */
/* template for writing TIDs */
u64 tidtemplate;
/* value to write to free TIDs */
u64 tidinvalid;
/* number of registers used for pioavail */
u32 pioavregs;
/* device (not port) flags, basically device capabilities */
u32 flags;
/* last buffer for user use */
u32 lastctxt_piobuf;
/* saturating counter of (non-port-specific) device interrupts */
u32 int_counter;
/* pio bufs allocated per ctxt */
u32 pbufsctxt;
/* if remainder on bufs/ctxt, ctxts < extrabuf get 1 extra */
u32 ctxts_extrabuf;
/*
* number of ctxts configured as max; zero is set to number chip
* supports, less gives more pio bufs/ctxt, etc.
*/
u32 cfgctxts;
/*
* number of ctxts available for PSM open
*/
u32 freectxts;
/*
* hint that we should update pioavailshadow before
* looking for a PIO buffer
*/
u32 upd_pio_shadow;
/* internal debugging stats */
u32 maxpkts_call;
u32 avgpkts_call;
u64 nopiobufs;
/* PCI Vendor ID (here for NodeInfo) */
u16 vendorid;
/* PCI Device ID (here for NodeInfo) */
u16 deviceid;
/* for write combining settings */
unsigned long wc_cookie;
unsigned long wc_base;
unsigned long wc_len;
/* shadow copy of struct page *'s for exp tid pages */
struct page **pageshadow;
/* shadow copy of dma handles for exp tid pages */
dma_addr_t *physshadow;
u64 __iomem *egrtidbase;
spinlock_t sendctrl_lock; /* protect changes to sendctrl shadow */
/* around rcd and (user ctxts) ctxt_cnt use (intr vs free) */
spinlock_t uctxt_lock; /* rcd and user context changes */
/*
* per unit status, see also portdata statusp
* mapped readonly into user processes so they can get unit and
* IB link status cheaply
*/
u64 *devstatusp;
char *freezemsg; /* freeze msg if hw error put chip in freeze */
u32 freezelen; /* max length of freezemsg */
/* timer used to prevent stats overflow, error throttling, etc. */
struct timer_list stats_timer;
/* timer to verify interrupts work, and fallback if possible */
struct timer_list intrchk_timer;
unsigned long ureg_align; /* user register alignment */
/*
* Protects pioavailshadow, pioavailkernel, pio_need_disarm, and
* pio_writing.
*/
spinlock_t pioavail_lock;
/*
* Shadow copies of registers; size indicates read access size.
* Most of them are readonly, but some are write-only register,
* where we manipulate the bits in the shadow copy, and then write
* the shadow copy to qlogic_ib.
*
* We deliberately make most of these 32 bits, since they have
* restricted range. For any that we read, we won't to generate 32
* bit accesses, since Opteron will generate 2 separate 32 bit HT
* transactions for a 64 bit read, and we want to avoid unnecessary
* bus transactions.
*/
/* This is the 64 bit group */
unsigned long pioavailshadow[6];
/* bitmap of send buffers available for the kernel to use with PIO. */
unsigned long pioavailkernel[6];
/* bitmap of send buffers which need to be disarmed. */
unsigned long pio_need_disarm[3];
/* bitmap of send buffers which are being written to. */
unsigned long pio_writing[3];
/* kr_revision shadow */
u64 revision;
/* Base GUID for device (from eeprom, network order) */
__be64 base_guid;
/*
* kr_sendpiobufbase value (chip offset of pio buffers), and the
* base of the 2KB buffer s(user processes only use 2K)
*/
u64 piobufbase;
u32 pio2k_bufbase;
/* these are the "32 bit" regs */
/* number of GUIDs in the flash for this interface */
u32 nguid;
/*
* the following two are 32-bit bitmasks, but {test,clear,set}_bit
* all expect bit fields to be "unsigned long"
*/
unsigned long rcvctrl; /* shadow per device rcvctrl */
unsigned long sendctrl; /* shadow per device sendctrl */
/* value we put in kr_rcvhdrcnt */
u32 rcvhdrcnt;
/* value we put in kr_rcvhdrsize */
u32 rcvhdrsize;
/* value we put in kr_rcvhdrentsize */
u32 rcvhdrentsize;
/* kr_ctxtcnt value */
u32 ctxtcnt;
/* kr_pagealign value */
u32 palign;
/* number of "2KB" PIO buffers */
u32 piobcnt2k;
/* size in bytes of "2KB" PIO buffers */
u32 piosize2k;
/* max usable size in dwords of a "2KB" PIO buffer before going "4KB" */
u32 piosize2kmax_dwords;
/* number of "4KB" PIO buffers */
u32 piobcnt4k;
/* size in bytes of "4KB" PIO buffers */
u32 piosize4k;
/* kr_rcvegrbase value */
u32 rcvegrbase;
/* kr_rcvtidbase value */
u32 rcvtidbase;
/* kr_rcvtidcnt value */
u32 rcvtidcnt;
/* kr_userregbase */
u32 uregbase;
/* shadow the control register contents */
u32 control;
/* chip address space used by 4k pio buffers */
u32 align4k;
/* size of each rcvegrbuffer */
u32 rcvegrbufsize;
/* localbus width (1, 2,4,8,16,32) from config space */
u32 lbus_width;
/* localbus speed in MHz */
u32 lbus_speed;
int unit; /* unit # of this chip */
/* start of CHIP_SPEC move to chipspec, but need code changes */
/* low and high portions of MSI capability/vector */
u32 msi_lo;
/* saved after PCIe init for restore after reset */
u32 msi_hi;
/* MSI data (vector) saved for restore */
u16 msi_data;
/* so we can rewrite it after a chip reset */
u32 pcibar0;
/* so we can rewrite it after a chip reset */
u32 pcibar1;
u64 rhdrhead_intr_off;
/*
* ASCII serial number, from flash, large enough for original
* all digit strings, and longer QLogic serial number format
*/
u8 serial[16];
/* human readable board version */
u8 boardversion[96];
u8 lbus_info[32]; /* human readable localbus info */
/* chip major rev, from qib_revision */
u8 majrev;
/* chip minor rev, from qib_revision */
u8 minrev;
/* Misc small ints */
/* Number of physical ports available */
u8 num_pports;
/* Lowest context number which can be used by user processes */
u8 first_user_ctxt;
u8 n_krcv_queues;
u8 qpn_mask;
u8 skip_kctxt_mask;
u16 rhf_offset; /* offset of RHF within receive header entry */
/*
* GPIO pins for twsi-connected devices, and device code for eeprom
*/
u8 gpio_sda_num;
u8 gpio_scl_num;
u8 twsi_eeprom_dev;
u8 board_atten;
/* Support (including locks) for EEPROM logging of errors and time */
/* control access to actual counters, timer */
spinlock_t eep_st_lock;
/* control high-level access to EEPROM */
struct mutex eep_lock;
uint64_t traffic_wds;
/* active time is kept in seconds, but logged in hours */
atomic_t active_time;
/* Below are nominal shadow of EEPROM, new since last EEPROM update */
uint8_t eep_st_errs[QIB_EEP_LOG_CNT];
uint8_t eep_st_new_errs[QIB_EEP_LOG_CNT];
uint16_t eep_hrs;
/*
* masks for which bits of errs, hwerrs that cause
* each of the counters to increment.
*/
struct qib_eep_log_mask eep_st_masks[QIB_EEP_LOG_CNT];
struct qib_diag_client *diag_client;
spinlock_t qib_diag_trans_lock; /* protect diag observer ops */
struct diag_observer_list_elt *diag_observer_list;
u8 psxmitwait_supported;
/* cycle length of PS* counters in HW (in picoseconds) */
u16 psxmitwait_check_rate;
/* high volume overflow errors defered to tasklet */
struct tasklet_struct error_tasklet;
};
/* hol_state values */
#define QIB_HOL_UP 0
#define QIB_HOL_INIT 1
#define QIB_SDMA_SENDCTRL_OP_ENABLE (1U << 0)
#define QIB_SDMA_SENDCTRL_OP_INTENABLE (1U << 1)
#define QIB_SDMA_SENDCTRL_OP_HALT (1U << 2)
#define QIB_SDMA_SENDCTRL_OP_CLEANUP (1U << 3)
#define QIB_SDMA_SENDCTRL_OP_DRAIN (1U << 4)
/* operation types for f_txchk_change() */
#define TXCHK_CHG_TYPE_DIS1 3
#define TXCHK_CHG_TYPE_ENAB1 2
#define TXCHK_CHG_TYPE_KERN 1
#define TXCHK_CHG_TYPE_USER 0
#define QIB_CHASE_TIME msecs_to_jiffies(145)
#define QIB_CHASE_DIS_TIME msecs_to_jiffies(160)
/* Private data for file operations */
struct qib_filedata {
struct qib_ctxtdata *rcd;
unsigned subctxt;
unsigned tidcursor;
struct qib_user_sdma_queue *pq;
int rec_cpu_num; /* for cpu affinity; -1 if none */
};
extern struct list_head qib_dev_list;
extern spinlock_t qib_devs_lock;
extern struct qib_devdata *qib_lookup(int unit);
extern u32 qib_cpulist_count;
extern unsigned long *qib_cpulist;
extern unsigned qib_wc_pat;
int qib_init(struct qib_devdata *, int);
int init_chip_wc_pat(struct qib_devdata *dd, u32);
int qib_enable_wc(struct qib_devdata *dd);
void qib_disable_wc(struct qib_devdata *dd);
int qib_count_units(int *npresentp, int *nupp);
int qib_count_active_units(void);
int qib_cdev_init(int minor, const char *name,
const struct file_operations *fops,
struct cdev **cdevp, struct device **devp);
void qib_cdev_cleanup(struct cdev **cdevp, struct device **devp);
int qib_dev_init(void);
void qib_dev_cleanup(void);
int qib_diag_add(struct qib_devdata *);
void qib_diag_remove(struct qib_devdata *);
void qib_handle_e_ibstatuschanged(struct qib_pportdata *, u64);
void qib_sdma_update_tail(struct qib_pportdata *, u16); /* hold sdma_lock */
int qib_decode_err(struct qib_devdata *dd, char *buf, size_t blen, u64 err);
void qib_bad_intrstatus(struct qib_devdata *);
void qib_handle_urcv(struct qib_devdata *, u64);
/* clean up any per-chip chip-specific stuff */
void qib_chip_cleanup(struct qib_devdata *);
/* clean up any chip type-specific stuff */
void qib_chip_done(void);
/* check to see if we have to force ordering for write combining */
int qib_unordered_wc(void);
void qib_pio_copy(void __iomem *to, const void *from, size_t count);
void qib_disarm_piobufs(struct qib_devdata *, unsigned, unsigned);
int qib_disarm_piobufs_ifneeded(struct qib_ctxtdata *);
void qib_disarm_piobufs_set(struct qib_devdata *, unsigned long *, unsigned);
void qib_cancel_sends(struct qib_pportdata *);
int qib_create_rcvhdrq(struct qib_devdata *, struct qib_ctxtdata *);
int qib_setup_eagerbufs(struct qib_ctxtdata *);
void qib_set_ctxtcnt(struct qib_devdata *);
int qib_create_ctxts(struct qib_devdata *dd);
struct qib_ctxtdata *qib_create_ctxtdata(struct qib_pportdata *, u32);
void qib_init_pportdata(struct qib_pportdata *, struct qib_devdata *, u8, u8);
void qib_free_ctxtdata(struct qib_devdata *, struct qib_ctxtdata *);
u32 qib_kreceive(struct qib_ctxtdata *, u32 *, u32 *);
int qib_reset_device(int);
int qib_wait_linkstate(struct qib_pportdata *, u32, int);
int qib_set_linkstate(struct qib_pportdata *, u8);
int qib_set_mtu(struct qib_pportdata *, u16);
int qib_set_lid(struct qib_pportdata *, u32, u8);
void qib_hol_down(struct qib_pportdata *);
void qib_hol_init(struct qib_pportdata *);
void qib_hol_up(struct qib_pportdata *);
void qib_hol_event(unsigned long);
void qib_disable_after_error(struct qib_devdata *);
int qib_set_uevent_bits(struct qib_pportdata *, const int);
/* for use in system calls, where we want to know device type, etc. */
#define ctxt_fp(fp) \
(((struct qib_filedata *)(fp)->private_data)->rcd)
#define subctxt_fp(fp) \
(((struct qib_filedata *)(fp)->private_data)->subctxt)
#define tidcursor_fp(fp) \
(((struct qib_filedata *)(fp)->private_data)->tidcursor)
#define user_sdma_queue_fp(fp) \
(((struct qib_filedata *)(fp)->private_data)->pq)
static inline struct qib_devdata *dd_from_ppd(struct qib_pportdata *ppd)
{
return ppd->dd;
}
static inline struct qib_devdata *dd_from_dev(struct qib_ibdev *dev)
{
return container_of(dev, struct qib_devdata, verbs_dev);
}
static inline struct qib_devdata *dd_from_ibdev(struct ib_device *ibdev)
{
return dd_from_dev(to_idev(ibdev));
}
static inline struct qib_pportdata *ppd_from_ibp(struct qib_ibport *ibp)
{
return container_of(ibp, struct qib_pportdata, ibport_data);
}
static inline struct qib_ibport *to_iport(struct ib_device *ibdev, u8 port)
{
struct qib_devdata *dd = dd_from_ibdev(ibdev);
unsigned pidx = port - 1; /* IB number port from 1, hdw from 0 */
WARN_ON(pidx >= dd->num_pports);
return &dd->pport[pidx].ibport_data;
}
/*
* values for dd->flags (_device_ related flags) and
*/
#define QIB_HAS_LINK_LATENCY 0x1 /* supports link latency (IB 1.2) */
#define QIB_INITTED 0x2 /* chip and driver up and initted */
#define QIB_DOING_RESET 0x4 /* in the middle of doing chip reset */
#define QIB_PRESENT 0x8 /* chip accesses can be done */
#define QIB_PIO_FLUSH_WC 0x10 /* Needs Write combining flush for PIO */
#define QIB_HAS_THRESH_UPDATE 0x40
#define QIB_HAS_SDMA_TIMEOUT 0x80
#define QIB_USE_SPCL_TRIG 0x100 /* SpecialTrigger launch enabled */
#define QIB_NODMA_RTAIL 0x200 /* rcvhdrtail register DMA enabled */
#define QIB_HAS_INTX 0x800 /* Supports INTx interrupts */
#define QIB_HAS_SEND_DMA 0x1000 /* Supports Send DMA */
#define QIB_HAS_VLSUPP 0x2000 /* Supports multiple VLs; PBC different */
#define QIB_HAS_HDRSUPP 0x4000 /* Supports header suppression */
#define QIB_BADINTR 0x8000 /* severe interrupt problems */
#define QIB_DCA_ENABLED 0x10000 /* Direct Cache Access enabled */
#define QIB_HAS_QSFP 0x20000 /* device (card instance) has QSFP */
/*
* values for ppd->lflags (_ib_port_ related flags)
*/
#define QIBL_LINKV 0x1 /* IB link state valid */
#define QIBL_LINKDOWN 0x8 /* IB link is down */
#define QIBL_LINKINIT 0x10 /* IB link level is up */
#define QIBL_LINKARMED 0x20 /* IB link is ARMED */
#define QIBL_LINKACTIVE 0x40 /* IB link is ACTIVE */
/* leave a gap for more IB-link state */
#define QIBL_IB_AUTONEG_INPROG 0x1000 /* non-IBTA DDR/QDR neg active */
#define QIBL_IB_AUTONEG_FAILED 0x2000 /* non-IBTA DDR/QDR neg failed */
#define QIBL_IB_LINK_DISABLED 0x4000 /* Linkdown-disable forced,
* Do not try to bring up */
#define QIBL_IB_FORCE_NOTIFY 0x8000 /* force notify on next ib change */
/* IB dword length mask in PBC (lower 11 bits); same for all chips */
#define QIB_PBC_LENGTH_MASK ((1 << 11) - 1)
/* ctxt_flag bit offsets */
/* waiting for a packet to arrive */
#define QIB_CTXT_WAITING_RCV 2
/* master has not finished initializing */
#define QIB_CTXT_MASTER_UNINIT 4
/* waiting for an urgent packet to arrive */
#define QIB_CTXT_WAITING_URG 5
/* free up any allocated data at closes */
void qib_free_data(struct qib_ctxtdata *dd);
void qib_chg_pioavailkernel(struct qib_devdata *, unsigned, unsigned,
u32, struct qib_ctxtdata *);
struct qib_devdata *qib_init_iba7322_funcs(struct pci_dev *,
const struct pci_device_id *);
struct qib_devdata *qib_init_iba7220_funcs(struct pci_dev *,
const struct pci_device_id *);
struct qib_devdata *qib_init_iba6120_funcs(struct pci_dev *,
const struct pci_device_id *);
void qib_free_devdata(struct qib_devdata *);
struct qib_devdata *qib_alloc_devdata(struct pci_dev *pdev, size_t extra);
#define QIB_TWSI_NO_DEV 0xFF
/* Below qib_twsi_ functions must be called with eep_lock held */
int qib_twsi_reset(struct qib_devdata *dd);
int qib_twsi_blk_rd(struct qib_devdata *dd, int dev, int addr, void *buffer,
int len);
int qib_twsi_blk_wr(struct qib_devdata *dd, int dev, int addr,
const void *buffer, int len);
void qib_get_eeprom_info(struct qib_devdata *);
int qib_update_eeprom_log(struct qib_devdata *dd);
void qib_inc_eeprom_err(struct qib_devdata *dd, u32 eidx, u32 incr);
void qib_dump_lookup_output_queue(struct qib_devdata *);
void qib_force_pio_avail_update(struct qib_devdata *);
void qib_clear_symerror_on_linkup(unsigned long opaque);
/*
* Set LED override, only the two LSBs have "public" meaning, but
* any non-zero value substitutes them for the Link and LinkTrain
* LED states.
*/
#define QIB_LED_PHYS 1 /* Physical (linktraining) GREEN LED */
#define QIB_LED_LOG 2 /* Logical (link) YELLOW LED */
void qib_set_led_override(struct qib_pportdata *ppd, unsigned int val);
/* send dma routines */
int qib_setup_sdma(struct qib_pportdata *);
void qib_teardown_sdma(struct qib_pportdata *);
void __qib_sdma_intr(struct qib_pportdata *);
void qib_sdma_intr(struct qib_pportdata *);
int qib_sdma_verbs_send(struct qib_pportdata *, struct qib_sge_state *,
u32, struct qib_verbs_txreq *);
/* ppd->sdma_lock should be locked before calling this. */
int qib_sdma_make_progress(struct qib_pportdata *dd);
/* must be called under qib_sdma_lock */
static inline u16 qib_sdma_descq_freecnt(const struct qib_pportdata *ppd)
{
return ppd->sdma_descq_cnt -
(ppd->sdma_descq_added - ppd->sdma_descq_removed) - 1;
}
static inline int __qib_sdma_running(struct qib_pportdata *ppd)
{
return ppd->sdma_state.current_state == qib_sdma_state_s99_running;
}
int qib_sdma_running(struct qib_pportdata *);
void __qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
void qib_sdma_process_event(struct qib_pportdata *, enum qib_sdma_events);
/*
* number of words used for protocol header if not set by qib_userinit();
*/
#define QIB_DFLT_RCVHDRSIZE 9
/*
* We need to be able to handle an IB header of at least 24 dwords.
* We need the rcvhdrq large enough to handle largest IB header, but
* still have room for a 2KB MTU standard IB packet.
* Additionally, some processor/memory controller combinations
* benefit quite strongly from having the DMA'ed data be cacheline
* aligned and a cacheline multiple, so we set the size to 32 dwords
* (2 64-byte primary cachelines for pretty much all processors of
* interest). The alignment hurts nothing, other than using somewhat
* more memory.
*/
#define QIB_RCVHDR_ENTSIZE 32
int qib_get_user_pages(unsigned long, size_t, struct page **);
void qib_release_user_pages(struct page **, size_t);
int qib_eeprom_read(struct qib_devdata *, u8, void *, int);
int qib_eeprom_write(struct qib_devdata *, u8, const void *, int);
u32 __iomem *qib_getsendbuf_range(struct qib_devdata *, u32 *, u32, u32);
void qib_sendbuf_done(struct qib_devdata *, unsigned);
static inline void qib_clear_rcvhdrtail(const struct qib_ctxtdata *rcd)
{
*((u64 *) rcd->rcvhdrtail_kvaddr) = 0ULL;
}
static inline u32 qib_get_rcvhdrtail(const struct qib_ctxtdata *rcd)
{
/*
* volatile because it's a DMA target from the chip, routine is
* inlined, and don't want register caching or reordering.
*/
return (u32) le64_to_cpu(
*((volatile __le64 *)rcd->rcvhdrtail_kvaddr)); /* DMA'ed */
}
static inline u32 qib_get_hdrqtail(const struct qib_ctxtdata *rcd)
{
const struct qib_devdata *dd = rcd->dd;
u32 hdrqtail;
if (dd->flags & QIB_NODMA_RTAIL) {
__le32 *rhf_addr;
u32 seq;
rhf_addr = (__le32 *) rcd->rcvhdrq +
rcd->head + dd->rhf_offset;
seq = qib_hdrget_seq(rhf_addr);
hdrqtail = rcd->head;
if (seq == rcd->seq_cnt)
hdrqtail++;
} else
hdrqtail = qib_get_rcvhdrtail(rcd);
return hdrqtail;
}
/*
* sysfs interface.
*/
extern const char ib_qib_version[];
int qib_device_create(struct qib_devdata *);
void qib_device_remove(struct qib_devdata *);
int qib_create_port_files(struct ib_device *ibdev, u8 port_num,
struct kobject *kobj);
int qib_verbs_register_sysfs(struct qib_devdata *);
void qib_verbs_unregister_sysfs(struct qib_devdata *);
/* Hook for sysfs read of QSFP */
extern int qib_qsfp_dump(struct qib_pportdata *ppd, char *buf, int len);
int __init qib_init_qibfs(void);
int __exit qib_exit_qibfs(void);
int qibfs_add(struct qib_devdata *);
int qibfs_remove(struct qib_devdata *);
int qib_pcie_init(struct pci_dev *, const struct pci_device_id *);
int qib_pcie_ddinit(struct qib_devdata *, struct pci_dev *,
const struct pci_device_id *);
void qib_pcie_ddcleanup(struct qib_devdata *);
int qib_pcie_params(struct qib_devdata *, u32, u32 *, struct msix_entry *);
int qib_reinit_intr(struct qib_devdata *);
void qib_enable_intx(struct pci_dev *);
void qib_nomsi(struct qib_devdata *);
void qib_nomsix(struct qib_devdata *);
void qib_pcie_getcmd(struct qib_devdata *, u16 *, u8 *, u8 *);
void qib_pcie_reenable(struct qib_devdata *, u16, u8, u8);
/*
* dma_addr wrappers - all 0's invalid for hw
*/
dma_addr_t qib_map_page(struct pci_dev *, struct page *, unsigned long,
size_t, int);
const char *qib_get_unit_name(int unit);
/*
* Flush write combining store buffers (if present) and perform a write
* barrier.
*/
#if defined(CONFIG_X86_64)
#define qib_flush_wc() asm volatile("sfence" : : : "memory")
#else
#define qib_flush_wc() wmb() /* no reorder around wc flush */
#endif
/* global module parameter variables */
extern unsigned qib_ibmtu;
extern ushort qib_cfgctxts;
extern ushort qib_num_cfg_vls;
extern ushort qib_mini_init; /* If set, do few (ideally 0) writes to chip */
extern unsigned qib_n_krcv_queues;
extern unsigned qib_sdma_fetch_arb;
extern unsigned qib_compat_ddr_negotiate;
extern int qib_special_trigger;
extern struct mutex qib_mutex;
/* Number of seconds before our card status check... */
#define STATUS_TIMEOUT 60
#define QIB_DRV_NAME "ib_qib"
#define QIB_USER_MINOR_BASE 0
#define QIB_TRACE_MINOR 127
#define QIB_DIAGPKT_MINOR 128
#define QIB_DIAG_MINOR_BASE 129
#define QIB_NMINORS 255
#define PCI_VENDOR_ID_PATHSCALE 0x1fc1
#define PCI_VENDOR_ID_QLOGIC 0x1077
#define PCI_DEVICE_ID_QLOGIC_IB_6120 0x10
#define PCI_DEVICE_ID_QLOGIC_IB_7220 0x7220
#define PCI_DEVICE_ID_QLOGIC_IB_7322 0x7322
/*
* qib_early_err is used (only!) to print early errors before devdata is
* allocated, or when dd->pcidev may not be valid, and at the tail end of
* cleanup when devdata may have been freed, etc. qib_dev_porterr is
* the same as qib_dev_err, but is used when the message really needs
* the IB port# to be definitive as to what's happening..
* All of these go to the trace log, and the trace log entry is done
* first to avoid possible serial port delays from printk.
*/
#define qib_early_err(dev, fmt, ...) \
do { \
dev_err(dev, fmt, ##__VA_ARGS__); \
} while (0)
#define qib_dev_err(dd, fmt, ...) \
do { \
dev_err(&(dd)->pcidev->dev, "%s: " fmt, \
qib_get_unit_name((dd)->unit), ##__VA_ARGS__); \
} while (0)
#define qib_dev_porterr(dd, port, fmt, ...) \
do { \
dev_err(&(dd)->pcidev->dev, "%s: IB%u:%u " fmt, \
qib_get_unit_name((dd)->unit), (dd)->unit, (port), \
##__VA_ARGS__); \
} while (0)
#define qib_devinfo(pcidev, fmt, ...) \
do { \
dev_info(&(pcidev)->dev, fmt, ##__VA_ARGS__); \
} while (0)
/*
* this is used for formatting hw error messages...
*/
struct qib_hwerror_msgs {
u64 mask;
const char *msg;
size_t sz;
};
#define QLOGIC_IB_HWE_MSG(a, b) { .mask = a, .msg = b }
/* in qib_intr.c... */
void qib_format_hwerrors(u64 hwerrs,
const struct qib_hwerror_msgs *hwerrmsgs,
size_t nhwerrmsgs, char *msg, size_t lmsg);
#endif /* _QIB_KERNEL_H */
Reference in New Issue View Git Blame Copy Permalink