mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
ee569c43e3
Where devices only have one consumer, passing a consumer clock ID has no real benefit, and it only encourages wrong implementations of the clk API. Remove it. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
815 lines
19 KiB
C
815 lines
19 KiB
C
/*
|
|
* linux/drivers/char/amba.c
|
|
*
|
|
* Driver for AMBA serial ports
|
|
*
|
|
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
|
|
*
|
|
* Copyright 1999 ARM Limited
|
|
* Copyright (C) 2000 Deep Blue Solutions Ltd.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*
|
|
* This is a generic driver for ARM AMBA-type serial ports. They
|
|
* have a lot of 16550-like features, but are not register compatible.
|
|
* Note that although they do have CTS, DCD and DSR inputs, they do
|
|
* not have an RI input, nor do they have DTR or RTS outputs. If
|
|
* required, these have to be supplied via some other means (eg, GPIO)
|
|
* and hooked into this driver.
|
|
*/
|
|
|
|
#if defined(CONFIG_SERIAL_AMBA_PL010_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
|
|
#define SUPPORT_SYSRQ
|
|
#endif
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/console.h>
|
|
#include <linux/sysrq.h>
|
|
#include <linux/device.h>
|
|
#include <linux/tty.h>
|
|
#include <linux/tty_flip.h>
|
|
#include <linux/serial_core.h>
|
|
#include <linux/serial.h>
|
|
#include <linux/amba/bus.h>
|
|
#include <linux/amba/serial.h>
|
|
#include <linux/clk.h>
|
|
|
|
#include <asm/io.h>
|
|
|
|
#define UART_NR 8
|
|
|
|
#define SERIAL_AMBA_MAJOR 204
|
|
#define SERIAL_AMBA_MINOR 16
|
|
#define SERIAL_AMBA_NR UART_NR
|
|
|
|
#define AMBA_ISR_PASS_LIMIT 256
|
|
|
|
#define UART_RX_DATA(s) (((s) & UART01x_FR_RXFE) == 0)
|
|
#define UART_TX_READY(s) (((s) & UART01x_FR_TXFF) == 0)
|
|
|
|
#define UART_DUMMY_RSR_RX 256
|
|
#define UART_PORT_SIZE 64
|
|
|
|
/*
|
|
* We wrap our port structure around the generic uart_port.
|
|
*/
|
|
struct uart_amba_port {
|
|
struct uart_port port;
|
|
struct clk *clk;
|
|
struct amba_device *dev;
|
|
struct amba_pl010_data *data;
|
|
unsigned int old_status;
|
|
};
|
|
|
|
static void pl010_stop_tx(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
cr = readb(uap->port.membase + UART010_CR);
|
|
cr &= ~UART010_CR_TIE;
|
|
writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_start_tx(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
cr = readb(uap->port.membase + UART010_CR);
|
|
cr |= UART010_CR_TIE;
|
|
writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_stop_rx(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
cr = readb(uap->port.membase + UART010_CR);
|
|
cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
|
|
writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_enable_ms(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int cr;
|
|
|
|
cr = readb(uap->port.membase + UART010_CR);
|
|
cr |= UART010_CR_MSIE;
|
|
writel(cr, uap->port.membase + UART010_CR);
|
|
}
|
|
|
|
static void pl010_rx_chars(struct uart_amba_port *uap)
|
|
{
|
|
struct tty_struct *tty = uap->port.info->port.tty;
|
|
unsigned int status, ch, flag, rsr, max_count = 256;
|
|
|
|
status = readb(uap->port.membase + UART01x_FR);
|
|
while (UART_RX_DATA(status) && max_count--) {
|
|
ch = readb(uap->port.membase + UART01x_DR);
|
|
flag = TTY_NORMAL;
|
|
|
|
uap->port.icount.rx++;
|
|
|
|
/*
|
|
* Note that the error handling code is
|
|
* out of the main execution path
|
|
*/
|
|
rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
|
|
if (unlikely(rsr & UART01x_RSR_ANY)) {
|
|
writel(0, uap->port.membase + UART01x_ECR);
|
|
|
|
if (rsr & UART01x_RSR_BE) {
|
|
rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
|
|
uap->port.icount.brk++;
|
|
if (uart_handle_break(&uap->port))
|
|
goto ignore_char;
|
|
} else if (rsr & UART01x_RSR_PE)
|
|
uap->port.icount.parity++;
|
|
else if (rsr & UART01x_RSR_FE)
|
|
uap->port.icount.frame++;
|
|
if (rsr & UART01x_RSR_OE)
|
|
uap->port.icount.overrun++;
|
|
|
|
rsr &= uap->port.read_status_mask;
|
|
|
|
if (rsr & UART01x_RSR_BE)
|
|
flag = TTY_BREAK;
|
|
else if (rsr & UART01x_RSR_PE)
|
|
flag = TTY_PARITY;
|
|
else if (rsr & UART01x_RSR_FE)
|
|
flag = TTY_FRAME;
|
|
}
|
|
|
|
if (uart_handle_sysrq_char(&uap->port, ch))
|
|
goto ignore_char;
|
|
|
|
uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
|
|
|
|
ignore_char:
|
|
status = readb(uap->port.membase + UART01x_FR);
|
|
}
|
|
spin_unlock(&uap->port.lock);
|
|
tty_flip_buffer_push(tty);
|
|
spin_lock(&uap->port.lock);
|
|
}
|
|
|
|
static void pl010_tx_chars(struct uart_amba_port *uap)
|
|
{
|
|
struct circ_buf *xmit = &uap->port.info->xmit;
|
|
int count;
|
|
|
|
if (uap->port.x_char) {
|
|
writel(uap->port.x_char, uap->port.membase + UART01x_DR);
|
|
uap->port.icount.tx++;
|
|
uap->port.x_char = 0;
|
|
return;
|
|
}
|
|
if (uart_circ_empty(xmit) || uart_tx_stopped(&uap->port)) {
|
|
pl010_stop_tx(&uap->port);
|
|
return;
|
|
}
|
|
|
|
count = uap->port.fifosize >> 1;
|
|
do {
|
|
writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
|
|
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
|
|
uap->port.icount.tx++;
|
|
if (uart_circ_empty(xmit))
|
|
break;
|
|
} while (--count > 0);
|
|
|
|
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
|
|
uart_write_wakeup(&uap->port);
|
|
|
|
if (uart_circ_empty(xmit))
|
|
pl010_stop_tx(&uap->port);
|
|
}
|
|
|
|
static void pl010_modem_status(struct uart_amba_port *uap)
|
|
{
|
|
unsigned int status, delta;
|
|
|
|
writel(0, uap->port.membase + UART010_ICR);
|
|
|
|
status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
|
|
delta = status ^ uap->old_status;
|
|
uap->old_status = status;
|
|
|
|
if (!delta)
|
|
return;
|
|
|
|
if (delta & UART01x_FR_DCD)
|
|
uart_handle_dcd_change(&uap->port, status & UART01x_FR_DCD);
|
|
|
|
if (delta & UART01x_FR_DSR)
|
|
uap->port.icount.dsr++;
|
|
|
|
if (delta & UART01x_FR_CTS)
|
|
uart_handle_cts_change(&uap->port, status & UART01x_FR_CTS);
|
|
|
|
wake_up_interruptible(&uap->port.info->delta_msr_wait);
|
|
}
|
|
|
|
static irqreturn_t pl010_int(int irq, void *dev_id)
|
|
{
|
|
struct uart_amba_port *uap = dev_id;
|
|
unsigned int status, pass_counter = AMBA_ISR_PASS_LIMIT;
|
|
int handled = 0;
|
|
|
|
spin_lock(&uap->port.lock);
|
|
|
|
status = readb(uap->port.membase + UART010_IIR);
|
|
if (status) {
|
|
do {
|
|
if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
|
|
pl010_rx_chars(uap);
|
|
if (status & UART010_IIR_MIS)
|
|
pl010_modem_status(uap);
|
|
if (status & UART010_IIR_TIS)
|
|
pl010_tx_chars(uap);
|
|
|
|
if (pass_counter-- == 0)
|
|
break;
|
|
|
|
status = readb(uap->port.membase + UART010_IIR);
|
|
} while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
|
|
UART010_IIR_TIS));
|
|
handled = 1;
|
|
}
|
|
|
|
spin_unlock(&uap->port.lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
static unsigned int pl010_tx_empty(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int status = readb(uap->port.membase + UART01x_FR);
|
|
return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
|
|
}
|
|
|
|
static unsigned int pl010_get_mctrl(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int result = 0;
|
|
unsigned int status;
|
|
|
|
status = readb(uap->port.membase + UART01x_FR);
|
|
if (status & UART01x_FR_DCD)
|
|
result |= TIOCM_CAR;
|
|
if (status & UART01x_FR_DSR)
|
|
result |= TIOCM_DSR;
|
|
if (status & UART01x_FR_CTS)
|
|
result |= TIOCM_CTS;
|
|
|
|
return result;
|
|
}
|
|
|
|
static void pl010_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
|
|
if (uap->data)
|
|
uap->data->set_mctrl(uap->dev, uap->port.membase, mctrl);
|
|
}
|
|
|
|
static void pl010_break_ctl(struct uart_port *port, int break_state)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned long flags;
|
|
unsigned int lcr_h;
|
|
|
|
spin_lock_irqsave(&uap->port.lock, flags);
|
|
lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
if (break_state == -1)
|
|
lcr_h |= UART01x_LCRH_BRK;
|
|
else
|
|
lcr_h &= ~UART01x_LCRH_BRK;
|
|
writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
}
|
|
|
|
static int pl010_startup(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
int retval;
|
|
|
|
/*
|
|
* Try to enable the clock producer.
|
|
*/
|
|
retval = clk_enable(uap->clk);
|
|
if (retval)
|
|
goto out;
|
|
|
|
uap->port.uartclk = clk_get_rate(uap->clk);
|
|
|
|
/*
|
|
* Allocate the IRQ
|
|
*/
|
|
retval = request_irq(uap->port.irq, pl010_int, 0, "uart-pl010", uap);
|
|
if (retval)
|
|
goto clk_dis;
|
|
|
|
/*
|
|
* initialise the old status of the modem signals
|
|
*/
|
|
uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
|
|
|
|
/*
|
|
* Finally, enable interrupts
|
|
*/
|
|
writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
|
|
uap->port.membase + UART010_CR);
|
|
|
|
return 0;
|
|
|
|
clk_dis:
|
|
clk_disable(uap->clk);
|
|
out:
|
|
return retval;
|
|
}
|
|
|
|
static void pl010_shutdown(struct uart_port *port)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
|
|
/*
|
|
* Free the interrupt
|
|
*/
|
|
free_irq(uap->port.irq, uap);
|
|
|
|
/*
|
|
* disable all interrupts, disable the port
|
|
*/
|
|
writel(0, uap->port.membase + UART010_CR);
|
|
|
|
/* disable break condition and fifos */
|
|
writel(readb(uap->port.membase + UART010_LCRH) &
|
|
~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
|
|
uap->port.membase + UART010_LCRH);
|
|
|
|
/*
|
|
* Shut down the clock producer
|
|
*/
|
|
clk_disable(uap->clk);
|
|
}
|
|
|
|
static void
|
|
pl010_set_termios(struct uart_port *port, struct ktermios *termios,
|
|
struct ktermios *old)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int lcr_h, old_cr;
|
|
unsigned long flags;
|
|
unsigned int baud, quot;
|
|
|
|
/*
|
|
* Ask the core to calculate the divisor for us.
|
|
*/
|
|
baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
|
|
quot = uart_get_divisor(port, baud);
|
|
|
|
switch (termios->c_cflag & CSIZE) {
|
|
case CS5:
|
|
lcr_h = UART01x_LCRH_WLEN_5;
|
|
break;
|
|
case CS6:
|
|
lcr_h = UART01x_LCRH_WLEN_6;
|
|
break;
|
|
case CS7:
|
|
lcr_h = UART01x_LCRH_WLEN_7;
|
|
break;
|
|
default: // CS8
|
|
lcr_h = UART01x_LCRH_WLEN_8;
|
|
break;
|
|
}
|
|
if (termios->c_cflag & CSTOPB)
|
|
lcr_h |= UART01x_LCRH_STP2;
|
|
if (termios->c_cflag & PARENB) {
|
|
lcr_h |= UART01x_LCRH_PEN;
|
|
if (!(termios->c_cflag & PARODD))
|
|
lcr_h |= UART01x_LCRH_EPS;
|
|
}
|
|
if (uap->port.fifosize > 1)
|
|
lcr_h |= UART01x_LCRH_FEN;
|
|
|
|
spin_lock_irqsave(&uap->port.lock, flags);
|
|
|
|
/*
|
|
* Update the per-port timeout.
|
|
*/
|
|
uart_update_timeout(port, termios->c_cflag, baud);
|
|
|
|
uap->port.read_status_mask = UART01x_RSR_OE;
|
|
if (termios->c_iflag & INPCK)
|
|
uap->port.read_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
|
|
if (termios->c_iflag & (BRKINT | PARMRK))
|
|
uap->port.read_status_mask |= UART01x_RSR_BE;
|
|
|
|
/*
|
|
* Characters to ignore
|
|
*/
|
|
uap->port.ignore_status_mask = 0;
|
|
if (termios->c_iflag & IGNPAR)
|
|
uap->port.ignore_status_mask |= UART01x_RSR_FE | UART01x_RSR_PE;
|
|
if (termios->c_iflag & IGNBRK) {
|
|
uap->port.ignore_status_mask |= UART01x_RSR_BE;
|
|
/*
|
|
* If we're ignoring parity and break indicators,
|
|
* ignore overruns too (for real raw support).
|
|
*/
|
|
if (termios->c_iflag & IGNPAR)
|
|
uap->port.ignore_status_mask |= UART01x_RSR_OE;
|
|
}
|
|
|
|
/*
|
|
* Ignore all characters if CREAD is not set.
|
|
*/
|
|
if ((termios->c_cflag & CREAD) == 0)
|
|
uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
|
|
|
|
/* first, disable everything */
|
|
old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
|
|
|
|
if (UART_ENABLE_MS(port, termios->c_cflag))
|
|
old_cr |= UART010_CR_MSIE;
|
|
|
|
writel(0, uap->port.membase + UART010_CR);
|
|
|
|
/* Set baud rate */
|
|
quot -= 1;
|
|
writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
|
|
writel(quot & 0xff, uap->port.membase + UART010_LCRL);
|
|
|
|
/*
|
|
* ----------v----------v----------v----------v-----
|
|
* NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
|
|
* ----------^----------^----------^----------^-----
|
|
*/
|
|
writel(lcr_h, uap->port.membase + UART010_LCRH);
|
|
writel(old_cr, uap->port.membase + UART010_CR);
|
|
|
|
spin_unlock_irqrestore(&uap->port.lock, flags);
|
|
}
|
|
|
|
static const char *pl010_type(struct uart_port *port)
|
|
{
|
|
return port->type == PORT_AMBA ? "AMBA" : NULL;
|
|
}
|
|
|
|
/*
|
|
* Release the memory region(s) being used by 'port'
|
|
*/
|
|
static void pl010_release_port(struct uart_port *port)
|
|
{
|
|
release_mem_region(port->mapbase, UART_PORT_SIZE);
|
|
}
|
|
|
|
/*
|
|
* Request the memory region(s) being used by 'port'
|
|
*/
|
|
static int pl010_request_port(struct uart_port *port)
|
|
{
|
|
return request_mem_region(port->mapbase, UART_PORT_SIZE, "uart-pl010")
|
|
!= NULL ? 0 : -EBUSY;
|
|
}
|
|
|
|
/*
|
|
* Configure/autoconfigure the port.
|
|
*/
|
|
static void pl010_config_port(struct uart_port *port, int flags)
|
|
{
|
|
if (flags & UART_CONFIG_TYPE) {
|
|
port->type = PORT_AMBA;
|
|
pl010_request_port(port);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* verify the new serial_struct (for TIOCSSERIAL).
|
|
*/
|
|
static int pl010_verify_port(struct uart_port *port, struct serial_struct *ser)
|
|
{
|
|
int ret = 0;
|
|
if (ser->type != PORT_UNKNOWN && ser->type != PORT_AMBA)
|
|
ret = -EINVAL;
|
|
if (ser->irq < 0 || ser->irq >= nr_irqs)
|
|
ret = -EINVAL;
|
|
if (ser->baud_base < 9600)
|
|
ret = -EINVAL;
|
|
return ret;
|
|
}
|
|
|
|
static struct uart_ops amba_pl010_pops = {
|
|
.tx_empty = pl010_tx_empty,
|
|
.set_mctrl = pl010_set_mctrl,
|
|
.get_mctrl = pl010_get_mctrl,
|
|
.stop_tx = pl010_stop_tx,
|
|
.start_tx = pl010_start_tx,
|
|
.stop_rx = pl010_stop_rx,
|
|
.enable_ms = pl010_enable_ms,
|
|
.break_ctl = pl010_break_ctl,
|
|
.startup = pl010_startup,
|
|
.shutdown = pl010_shutdown,
|
|
.set_termios = pl010_set_termios,
|
|
.type = pl010_type,
|
|
.release_port = pl010_release_port,
|
|
.request_port = pl010_request_port,
|
|
.config_port = pl010_config_port,
|
|
.verify_port = pl010_verify_port,
|
|
};
|
|
|
|
static struct uart_amba_port *amba_ports[UART_NR];
|
|
|
|
#ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
|
|
|
|
static void pl010_console_putchar(struct uart_port *port, int ch)
|
|
{
|
|
struct uart_amba_port *uap = (struct uart_amba_port *)port;
|
|
unsigned int status;
|
|
|
|
do {
|
|
status = readb(uap->port.membase + UART01x_FR);
|
|
barrier();
|
|
} while (!UART_TX_READY(status));
|
|
writel(ch, uap->port.membase + UART01x_DR);
|
|
}
|
|
|
|
static void
|
|
pl010_console_write(struct console *co, const char *s, unsigned int count)
|
|
{
|
|
struct uart_amba_port *uap = amba_ports[co->index];
|
|
unsigned int status, old_cr;
|
|
|
|
clk_enable(uap->clk);
|
|
|
|
/*
|
|
* First save the CR then disable the interrupts
|
|
*/
|
|
old_cr = readb(uap->port.membase + UART010_CR);
|
|
writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
|
|
|
|
uart_console_write(&uap->port, s, count, pl010_console_putchar);
|
|
|
|
/*
|
|
* Finally, wait for transmitter to become empty
|
|
* and restore the TCR
|
|
*/
|
|
do {
|
|
status = readb(uap->port.membase + UART01x_FR);
|
|
barrier();
|
|
} while (status & UART01x_FR_BUSY);
|
|
writel(old_cr, uap->port.membase + UART010_CR);
|
|
|
|
clk_disable(uap->clk);
|
|
}
|
|
|
|
static void __init
|
|
pl010_console_get_options(struct uart_amba_port *uap, int *baud,
|
|
int *parity, int *bits)
|
|
{
|
|
if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
|
|
unsigned int lcr_h, quot;
|
|
lcr_h = readb(uap->port.membase + UART010_LCRH);
|
|
|
|
*parity = 'n';
|
|
if (lcr_h & UART01x_LCRH_PEN) {
|
|
if (lcr_h & UART01x_LCRH_EPS)
|
|
*parity = 'e';
|
|
else
|
|
*parity = 'o';
|
|
}
|
|
|
|
if ((lcr_h & 0x60) == UART01x_LCRH_WLEN_7)
|
|
*bits = 7;
|
|
else
|
|
*bits = 8;
|
|
|
|
quot = readb(uap->port.membase + UART010_LCRL) |
|
|
readb(uap->port.membase + UART010_LCRM) << 8;
|
|
*baud = uap->port.uartclk / (16 * (quot + 1));
|
|
}
|
|
}
|
|
|
|
static int __init pl010_console_setup(struct console *co, char *options)
|
|
{
|
|
struct uart_amba_port *uap;
|
|
int baud = 38400;
|
|
int bits = 8;
|
|
int parity = 'n';
|
|
int flow = 'n';
|
|
|
|
/*
|
|
* Check whether an invalid uart number has been specified, and
|
|
* if so, search for the first available port that does have
|
|
* console support.
|
|
*/
|
|
if (co->index >= UART_NR)
|
|
co->index = 0;
|
|
uap = amba_ports[co->index];
|
|
if (!uap)
|
|
return -ENODEV;
|
|
|
|
uap->port.uartclk = clk_get_rate(uap->clk);
|
|
|
|
if (options)
|
|
uart_parse_options(options, &baud, &parity, &bits, &flow);
|
|
else
|
|
pl010_console_get_options(uap, &baud, &parity, &bits);
|
|
|
|
return uart_set_options(&uap->port, co, baud, parity, bits, flow);
|
|
}
|
|
|
|
static struct uart_driver amba_reg;
|
|
static struct console amba_console = {
|
|
.name = "ttyAM",
|
|
.write = pl010_console_write,
|
|
.device = uart_console_device,
|
|
.setup = pl010_console_setup,
|
|
.flags = CON_PRINTBUFFER,
|
|
.index = -1,
|
|
.data = &amba_reg,
|
|
};
|
|
|
|
#define AMBA_CONSOLE &amba_console
|
|
#else
|
|
#define AMBA_CONSOLE NULL
|
|
#endif
|
|
|
|
static struct uart_driver amba_reg = {
|
|
.owner = THIS_MODULE,
|
|
.driver_name = "ttyAM",
|
|
.dev_name = "ttyAM",
|
|
.major = SERIAL_AMBA_MAJOR,
|
|
.minor = SERIAL_AMBA_MINOR,
|
|
.nr = UART_NR,
|
|
.cons = AMBA_CONSOLE,
|
|
};
|
|
|
|
static int pl010_probe(struct amba_device *dev, void *id)
|
|
{
|
|
struct uart_amba_port *uap;
|
|
void __iomem *base;
|
|
int i, ret;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
|
|
if (amba_ports[i] == NULL)
|
|
break;
|
|
|
|
if (i == ARRAY_SIZE(amba_ports)) {
|
|
ret = -EBUSY;
|
|
goto out;
|
|
}
|
|
|
|
uap = kzalloc(sizeof(struct uart_amba_port), GFP_KERNEL);
|
|
if (!uap) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
base = ioremap(dev->res.start, PAGE_SIZE);
|
|
if (!base) {
|
|
ret = -ENOMEM;
|
|
goto free;
|
|
}
|
|
|
|
uap->clk = clk_get(&dev->dev, NULL);
|
|
if (IS_ERR(uap->clk)) {
|
|
ret = PTR_ERR(uap->clk);
|
|
goto unmap;
|
|
}
|
|
|
|
uap->port.dev = &dev->dev;
|
|
uap->port.mapbase = dev->res.start;
|
|
uap->port.membase = base;
|
|
uap->port.iotype = UPIO_MEM;
|
|
uap->port.irq = dev->irq[0];
|
|
uap->port.fifosize = 16;
|
|
uap->port.ops = &amba_pl010_pops;
|
|
uap->port.flags = UPF_BOOT_AUTOCONF;
|
|
uap->port.line = i;
|
|
uap->dev = dev;
|
|
uap->data = dev->dev.platform_data;
|
|
|
|
amba_ports[i] = uap;
|
|
|
|
amba_set_drvdata(dev, uap);
|
|
ret = uart_add_one_port(&amba_reg, &uap->port);
|
|
if (ret) {
|
|
amba_set_drvdata(dev, NULL);
|
|
amba_ports[i] = NULL;
|
|
clk_put(uap->clk);
|
|
unmap:
|
|
iounmap(base);
|
|
free:
|
|
kfree(uap);
|
|
}
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int pl010_remove(struct amba_device *dev)
|
|
{
|
|
struct uart_amba_port *uap = amba_get_drvdata(dev);
|
|
int i;
|
|
|
|
amba_set_drvdata(dev, NULL);
|
|
|
|
uart_remove_one_port(&amba_reg, &uap->port);
|
|
|
|
for (i = 0; i < ARRAY_SIZE(amba_ports); i++)
|
|
if (amba_ports[i] == uap)
|
|
amba_ports[i] = NULL;
|
|
|
|
iounmap(uap->port.membase);
|
|
clk_put(uap->clk);
|
|
kfree(uap);
|
|
return 0;
|
|
}
|
|
|
|
static int pl010_suspend(struct amba_device *dev, pm_message_t state)
|
|
{
|
|
struct uart_amba_port *uap = amba_get_drvdata(dev);
|
|
|
|
if (uap)
|
|
uart_suspend_port(&amba_reg, &uap->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int pl010_resume(struct amba_device *dev)
|
|
{
|
|
struct uart_amba_port *uap = amba_get_drvdata(dev);
|
|
|
|
if (uap)
|
|
uart_resume_port(&amba_reg, &uap->port);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct amba_id pl010_ids[] __initdata = {
|
|
{
|
|
.id = 0x00041010,
|
|
.mask = 0x000fffff,
|
|
},
|
|
{ 0, 0 },
|
|
};
|
|
|
|
static struct amba_driver pl010_driver = {
|
|
.drv = {
|
|
.name = "uart-pl010",
|
|
},
|
|
.id_table = pl010_ids,
|
|
.probe = pl010_probe,
|
|
.remove = pl010_remove,
|
|
.suspend = pl010_suspend,
|
|
.resume = pl010_resume,
|
|
};
|
|
|
|
static int __init pl010_init(void)
|
|
{
|
|
int ret;
|
|
|
|
printk(KERN_INFO "Serial: AMBA driver\n");
|
|
|
|
ret = uart_register_driver(&amba_reg);
|
|
if (ret == 0) {
|
|
ret = amba_driver_register(&pl010_driver);
|
|
if (ret)
|
|
uart_unregister_driver(&amba_reg);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static void __exit pl010_exit(void)
|
|
{
|
|
amba_driver_unregister(&pl010_driver);
|
|
uart_unregister_driver(&amba_reg);
|
|
}
|
|
|
|
module_init(pl010_init);
|
|
module_exit(pl010_exit);
|
|
|
|
MODULE_AUTHOR("ARM Ltd/Deep Blue Solutions Ltd");
|
|
MODULE_DESCRIPTION("ARM AMBA serial port driver");
|
|
MODULE_LICENSE("GPL");
|