mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
ef22d1604c
DSPI instances in Vybrid have a different amount of chip selects and CTARs (Clock and transfer Attributes Register). In case of DSPI1 we only have 2 CTAR registers and 4 CS. In present driver implementation CTAR offset is derived from CS instance which will lead to out of bound access if chip select instance is greater than CTAR register instance, hence use single CTAR0 register for all CS instances. Since we write the CTAR register anyway before each access, there is no value in using the additional CTAR registers. Also one should not program a value in CTAS for a CTAR register that is not present, hence configure CTAS to use CTAR0. Signed-off-by: Bhuvanchandra DV <bhuvanchandra.dv@toradex.com> Acked-by: Stefan Agner <stefan@agner.ch> Signed-off-by: Mark Brown <broonie@kernel.org>
774 lines
19 KiB
C
774 lines
19 KiB
C
/*
|
|
* drivers/spi/spi-fsl-dspi.c
|
|
*
|
|
* Copyright 2013 Freescale Semiconductor, Inc.
|
|
*
|
|
* Freescale DSPI driver
|
|
* This file contains a driver for the Freescale DSPI
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/pinctrl/consumer.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/spi/spi_bitbang.h>
|
|
#include <linux/time.h>
|
|
|
|
#define DRIVER_NAME "fsl-dspi"
|
|
|
|
#define TRAN_STATE_RX_VOID 0x01
|
|
#define TRAN_STATE_TX_VOID 0x02
|
|
#define TRAN_STATE_WORD_ODD_NUM 0x04
|
|
|
|
#define DSPI_FIFO_SIZE 4
|
|
|
|
#define SPI_MCR 0x00
|
|
#define SPI_MCR_MASTER (1 << 31)
|
|
#define SPI_MCR_PCSIS (0x3F << 16)
|
|
#define SPI_MCR_CLR_TXF (1 << 11)
|
|
#define SPI_MCR_CLR_RXF (1 << 10)
|
|
|
|
#define SPI_TCR 0x08
|
|
#define SPI_TCR_GET_TCNT(x) (((x) & 0xffff0000) >> 16)
|
|
|
|
#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4))
|
|
#define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27)
|
|
#define SPI_CTAR_CPOL(x) ((x) << 26)
|
|
#define SPI_CTAR_CPHA(x) ((x) << 25)
|
|
#define SPI_CTAR_LSBFE(x) ((x) << 24)
|
|
#define SPI_CTAR_PCSSCK(x) (((x) & 0x00000003) << 22)
|
|
#define SPI_CTAR_PASC(x) (((x) & 0x00000003) << 20)
|
|
#define SPI_CTAR_PDT(x) (((x) & 0x00000003) << 18)
|
|
#define SPI_CTAR_PBR(x) (((x) & 0x00000003) << 16)
|
|
#define SPI_CTAR_CSSCK(x) (((x) & 0x0000000f) << 12)
|
|
#define SPI_CTAR_ASC(x) (((x) & 0x0000000f) << 8)
|
|
#define SPI_CTAR_DT(x) (((x) & 0x0000000f) << 4)
|
|
#define SPI_CTAR_BR(x) ((x) & 0x0000000f)
|
|
#define SPI_CTAR_SCALE_BITS 0xf
|
|
|
|
#define SPI_CTAR0_SLAVE 0x0c
|
|
|
|
#define SPI_SR 0x2c
|
|
#define SPI_SR_EOQF 0x10000000
|
|
#define SPI_SR_TCFQF 0x80000000
|
|
|
|
#define SPI_RSER 0x30
|
|
#define SPI_RSER_EOQFE 0x10000000
|
|
#define SPI_RSER_TCFQE 0x80000000
|
|
|
|
#define SPI_PUSHR 0x34
|
|
#define SPI_PUSHR_CONT (1 << 31)
|
|
#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28)
|
|
#define SPI_PUSHR_EOQ (1 << 27)
|
|
#define SPI_PUSHR_CTCNT (1 << 26)
|
|
#define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16)
|
|
#define SPI_PUSHR_TXDATA(x) ((x) & 0x0000ffff)
|
|
|
|
#define SPI_PUSHR_SLAVE 0x34
|
|
|
|
#define SPI_POPR 0x38
|
|
#define SPI_POPR_RXDATA(x) ((x) & 0x0000ffff)
|
|
|
|
#define SPI_TXFR0 0x3c
|
|
#define SPI_TXFR1 0x40
|
|
#define SPI_TXFR2 0x44
|
|
#define SPI_TXFR3 0x48
|
|
#define SPI_RXFR0 0x7c
|
|
#define SPI_RXFR1 0x80
|
|
#define SPI_RXFR2 0x84
|
|
#define SPI_RXFR3 0x88
|
|
|
|
#define SPI_FRAME_BITS(bits) SPI_CTAR_FMSZ((bits) - 1)
|
|
#define SPI_FRAME_BITS_MASK SPI_CTAR_FMSZ(0xf)
|
|
#define SPI_FRAME_BITS_16 SPI_CTAR_FMSZ(0xf)
|
|
#define SPI_FRAME_BITS_8 SPI_CTAR_FMSZ(0x7)
|
|
|
|
#define SPI_CS_INIT 0x01
|
|
#define SPI_CS_ASSERT 0x02
|
|
#define SPI_CS_DROP 0x04
|
|
|
|
#define SPI_TCR_TCNT_MAX 0x10000
|
|
|
|
struct chip_data {
|
|
u32 mcr_val;
|
|
u32 ctar_val;
|
|
u16 void_write_data;
|
|
};
|
|
|
|
enum dspi_trans_mode {
|
|
DSPI_EOQ_MODE = 0,
|
|
DSPI_TCFQ_MODE,
|
|
};
|
|
|
|
struct fsl_dspi_devtype_data {
|
|
enum dspi_trans_mode trans_mode;
|
|
};
|
|
|
|
static const struct fsl_dspi_devtype_data vf610_data = {
|
|
.trans_mode = DSPI_EOQ_MODE,
|
|
};
|
|
|
|
static const struct fsl_dspi_devtype_data ls1021a_v1_data = {
|
|
.trans_mode = DSPI_TCFQ_MODE,
|
|
};
|
|
|
|
static const struct fsl_dspi_devtype_data ls2085a_data = {
|
|
.trans_mode = DSPI_TCFQ_MODE,
|
|
};
|
|
|
|
struct fsl_dspi {
|
|
struct spi_master *master;
|
|
struct platform_device *pdev;
|
|
|
|
struct regmap *regmap;
|
|
int irq;
|
|
struct clk *clk;
|
|
|
|
struct spi_transfer *cur_transfer;
|
|
struct spi_message *cur_msg;
|
|
struct chip_data *cur_chip;
|
|
size_t len;
|
|
void *tx;
|
|
void *tx_end;
|
|
void *rx;
|
|
void *rx_end;
|
|
char dataflags;
|
|
u8 cs;
|
|
u16 void_write_data;
|
|
u32 cs_change;
|
|
struct fsl_dspi_devtype_data *devtype_data;
|
|
|
|
wait_queue_head_t waitq;
|
|
u32 waitflags;
|
|
|
|
u32 spi_tcnt;
|
|
};
|
|
|
|
static inline int is_double_byte_mode(struct fsl_dspi *dspi)
|
|
{
|
|
unsigned int val;
|
|
|
|
regmap_read(dspi->regmap, SPI_CTAR(0), &val);
|
|
|
|
return ((val & SPI_FRAME_BITS_MASK) == SPI_FRAME_BITS(8)) ? 0 : 1;
|
|
}
|
|
|
|
static void hz_to_spi_baud(char *pbr, char *br, int speed_hz,
|
|
unsigned long clkrate)
|
|
{
|
|
/* Valid baud rate pre-scaler values */
|
|
int pbr_tbl[4] = {2, 3, 5, 7};
|
|
int brs[16] = { 2, 4, 6, 8,
|
|
16, 32, 64, 128,
|
|
256, 512, 1024, 2048,
|
|
4096, 8192, 16384, 32768 };
|
|
int scale_needed, scale, minscale = INT_MAX;
|
|
int i, j;
|
|
|
|
scale_needed = clkrate / speed_hz;
|
|
if (clkrate % speed_hz)
|
|
scale_needed++;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(brs); i++)
|
|
for (j = 0; j < ARRAY_SIZE(pbr_tbl); j++) {
|
|
scale = brs[i] * pbr_tbl[j];
|
|
if (scale >= scale_needed) {
|
|
if (scale < minscale) {
|
|
minscale = scale;
|
|
*br = i;
|
|
*pbr = j;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (minscale == INT_MAX) {
|
|
pr_warn("Can not find valid baud rate,speed_hz is %d,clkrate is %ld, we use the max prescaler value.\n",
|
|
speed_hz, clkrate);
|
|
*pbr = ARRAY_SIZE(pbr_tbl) - 1;
|
|
*br = ARRAY_SIZE(brs) - 1;
|
|
}
|
|
}
|
|
|
|
static void ns_delay_scale(char *psc, char *sc, int delay_ns,
|
|
unsigned long clkrate)
|
|
{
|
|
int pscale_tbl[4] = {1, 3, 5, 7};
|
|
int scale_needed, scale, minscale = INT_MAX;
|
|
int i, j;
|
|
u32 remainder;
|
|
|
|
scale_needed = div_u64_rem((u64)delay_ns * clkrate, NSEC_PER_SEC,
|
|
&remainder);
|
|
if (remainder)
|
|
scale_needed++;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(pscale_tbl); i++)
|
|
for (j = 0; j <= SPI_CTAR_SCALE_BITS; j++) {
|
|
scale = pscale_tbl[i] * (2 << j);
|
|
if (scale >= scale_needed) {
|
|
if (scale < minscale) {
|
|
minscale = scale;
|
|
*psc = i;
|
|
*sc = j;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (minscale == INT_MAX) {
|
|
pr_warn("Cannot find correct scale values for %dns delay at clkrate %ld, using max prescaler value",
|
|
delay_ns, clkrate);
|
|
*psc = ARRAY_SIZE(pscale_tbl) - 1;
|
|
*sc = SPI_CTAR_SCALE_BITS;
|
|
}
|
|
}
|
|
|
|
static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word)
|
|
{
|
|
u16 d16;
|
|
|
|
if (!(dspi->dataflags & TRAN_STATE_TX_VOID))
|
|
d16 = tx_word ? *(u16 *)dspi->tx : *(u8 *)dspi->tx;
|
|
else
|
|
d16 = dspi->void_write_data;
|
|
|
|
dspi->tx += tx_word + 1;
|
|
dspi->len -= tx_word + 1;
|
|
|
|
return SPI_PUSHR_TXDATA(d16) |
|
|
SPI_PUSHR_PCS(dspi->cs) |
|
|
SPI_PUSHR_CTAS(0) |
|
|
SPI_PUSHR_CONT;
|
|
}
|
|
|
|
static void dspi_data_from_popr(struct fsl_dspi *dspi, int rx_word)
|
|
{
|
|
u16 d;
|
|
unsigned int val;
|
|
|
|
regmap_read(dspi->regmap, SPI_POPR, &val);
|
|
d = SPI_POPR_RXDATA(val);
|
|
|
|
if (!(dspi->dataflags & TRAN_STATE_RX_VOID))
|
|
rx_word ? (*(u16 *)dspi->rx = d) : (*(u8 *)dspi->rx = d);
|
|
|
|
dspi->rx += rx_word + 1;
|
|
}
|
|
|
|
static int dspi_eoq_write(struct fsl_dspi *dspi)
|
|
{
|
|
int tx_count = 0;
|
|
int tx_word;
|
|
u32 dspi_pushr = 0;
|
|
|
|
tx_word = is_double_byte_mode(dspi);
|
|
|
|
while (dspi->len && (tx_count < DSPI_FIFO_SIZE)) {
|
|
/* If we are in word mode, only have a single byte to transfer
|
|
* switch to byte mode temporarily. Will switch back at the
|
|
* end of the transfer.
|
|
*/
|
|
if (tx_word && (dspi->len == 1)) {
|
|
dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
|
|
regmap_update_bits(dspi->regmap, SPI_CTAR(0),
|
|
SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
|
|
tx_word = 0;
|
|
}
|
|
|
|
dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
|
|
|
|
if (dspi->len == 0 || tx_count == DSPI_FIFO_SIZE - 1) {
|
|
/* last transfer in the transfer */
|
|
dspi_pushr |= SPI_PUSHR_EOQ;
|
|
if ((dspi->cs_change) && (!dspi->len))
|
|
dspi_pushr &= ~SPI_PUSHR_CONT;
|
|
} else if (tx_word && (dspi->len == 1))
|
|
dspi_pushr |= SPI_PUSHR_EOQ;
|
|
|
|
regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
|
|
|
|
tx_count++;
|
|
}
|
|
|
|
return tx_count * (tx_word + 1);
|
|
}
|
|
|
|
static int dspi_eoq_read(struct fsl_dspi *dspi)
|
|
{
|
|
int rx_count = 0;
|
|
int rx_word = is_double_byte_mode(dspi);
|
|
|
|
while ((dspi->rx < dspi->rx_end)
|
|
&& (rx_count < DSPI_FIFO_SIZE)) {
|
|
if (rx_word && (dspi->rx_end - dspi->rx) == 1)
|
|
rx_word = 0;
|
|
|
|
dspi_data_from_popr(dspi, rx_word);
|
|
rx_count++;
|
|
}
|
|
|
|
return rx_count;
|
|
}
|
|
|
|
static int dspi_tcfq_write(struct fsl_dspi *dspi)
|
|
{
|
|
int tx_word;
|
|
u32 dspi_pushr = 0;
|
|
|
|
tx_word = is_double_byte_mode(dspi);
|
|
|
|
if (tx_word && (dspi->len == 1)) {
|
|
dspi->dataflags |= TRAN_STATE_WORD_ODD_NUM;
|
|
regmap_update_bits(dspi->regmap, SPI_CTAR(0),
|
|
SPI_FRAME_BITS_MASK, SPI_FRAME_BITS(8));
|
|
tx_word = 0;
|
|
}
|
|
|
|
dspi_pushr = dspi_data_to_pushr(dspi, tx_word);
|
|
|
|
if ((dspi->cs_change) && (!dspi->len))
|
|
dspi_pushr &= ~SPI_PUSHR_CONT;
|
|
|
|
regmap_write(dspi->regmap, SPI_PUSHR, dspi_pushr);
|
|
|
|
return tx_word + 1;
|
|
}
|
|
|
|
static void dspi_tcfq_read(struct fsl_dspi *dspi)
|
|
{
|
|
int rx_word = is_double_byte_mode(dspi);
|
|
|
|
if (rx_word && (dspi->rx_end - dspi->rx) == 1)
|
|
rx_word = 0;
|
|
|
|
dspi_data_from_popr(dspi, rx_word);
|
|
}
|
|
|
|
static int dspi_transfer_one_message(struct spi_master *master,
|
|
struct spi_message *message)
|
|
{
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
struct spi_device *spi = message->spi;
|
|
struct spi_transfer *transfer;
|
|
int status = 0;
|
|
enum dspi_trans_mode trans_mode;
|
|
u32 spi_tcr;
|
|
|
|
regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
|
|
dspi->spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
|
|
|
|
message->actual_length = 0;
|
|
|
|
list_for_each_entry(transfer, &message->transfers, transfer_list) {
|
|
dspi->cur_transfer = transfer;
|
|
dspi->cur_msg = message;
|
|
dspi->cur_chip = spi_get_ctldata(spi);
|
|
dspi->cs = spi->chip_select;
|
|
dspi->cs_change = 0;
|
|
if (dspi->cur_transfer->transfer_list.next
|
|
== &dspi->cur_msg->transfers)
|
|
dspi->cs_change = 1;
|
|
dspi->void_write_data = dspi->cur_chip->void_write_data;
|
|
|
|
dspi->dataflags = 0;
|
|
dspi->tx = (void *)transfer->tx_buf;
|
|
dspi->tx_end = dspi->tx + transfer->len;
|
|
dspi->rx = transfer->rx_buf;
|
|
dspi->rx_end = dspi->rx + transfer->len;
|
|
dspi->len = transfer->len;
|
|
|
|
if (!dspi->rx)
|
|
dspi->dataflags |= TRAN_STATE_RX_VOID;
|
|
|
|
if (!dspi->tx)
|
|
dspi->dataflags |= TRAN_STATE_TX_VOID;
|
|
|
|
regmap_write(dspi->regmap, SPI_MCR, dspi->cur_chip->mcr_val);
|
|
regmap_update_bits(dspi->regmap, SPI_MCR,
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF,
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF);
|
|
regmap_write(dspi->regmap, SPI_CTAR(0),
|
|
dspi->cur_chip->ctar_val);
|
|
|
|
trans_mode = dspi->devtype_data->trans_mode;
|
|
switch (trans_mode) {
|
|
case DSPI_EOQ_MODE:
|
|
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_EOQFE);
|
|
dspi_eoq_write(dspi);
|
|
break;
|
|
case DSPI_TCFQ_MODE:
|
|
regmap_write(dspi->regmap, SPI_RSER, SPI_RSER_TCFQE);
|
|
dspi_tcfq_write(dspi);
|
|
break;
|
|
default:
|
|
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
|
|
trans_mode);
|
|
status = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
if (wait_event_interruptible(dspi->waitq, dspi->waitflags))
|
|
dev_err(&dspi->pdev->dev, "wait transfer complete fail!\n");
|
|
dspi->waitflags = 0;
|
|
|
|
if (transfer->delay_usecs)
|
|
udelay(transfer->delay_usecs);
|
|
}
|
|
|
|
out:
|
|
message->status = status;
|
|
spi_finalize_current_message(master);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int dspi_setup(struct spi_device *spi)
|
|
{
|
|
struct chip_data *chip;
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(spi->master);
|
|
u32 cs_sck_delay = 0, sck_cs_delay = 0;
|
|
unsigned char br = 0, pbr = 0, pcssck = 0, cssck = 0;
|
|
unsigned char pasc = 0, asc = 0, fmsz = 0;
|
|
unsigned long clkrate;
|
|
|
|
if ((spi->bits_per_word >= 4) && (spi->bits_per_word <= 16)) {
|
|
fmsz = spi->bits_per_word - 1;
|
|
} else {
|
|
pr_err("Invalid wordsize\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Only alloc on first setup */
|
|
chip = spi_get_ctldata(spi);
|
|
if (chip == NULL) {
|
|
chip = kzalloc(sizeof(struct chip_data), GFP_KERNEL);
|
|
if (!chip)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
of_property_read_u32(spi->dev.of_node, "fsl,spi-cs-sck-delay",
|
|
&cs_sck_delay);
|
|
|
|
of_property_read_u32(spi->dev.of_node, "fsl,spi-sck-cs-delay",
|
|
&sck_cs_delay);
|
|
|
|
chip->mcr_val = SPI_MCR_MASTER | SPI_MCR_PCSIS |
|
|
SPI_MCR_CLR_TXF | SPI_MCR_CLR_RXF;
|
|
|
|
chip->void_write_data = 0;
|
|
|
|
clkrate = clk_get_rate(dspi->clk);
|
|
hz_to_spi_baud(&pbr, &br, spi->max_speed_hz, clkrate);
|
|
|
|
/* Set PCS to SCK delay scale values */
|
|
ns_delay_scale(&pcssck, &cssck, cs_sck_delay, clkrate);
|
|
|
|
/* Set After SCK delay scale values */
|
|
ns_delay_scale(&pasc, &asc, sck_cs_delay, clkrate);
|
|
|
|
chip->ctar_val = SPI_CTAR_FMSZ(fmsz)
|
|
| SPI_CTAR_CPOL(spi->mode & SPI_CPOL ? 1 : 0)
|
|
| SPI_CTAR_CPHA(spi->mode & SPI_CPHA ? 1 : 0)
|
|
| SPI_CTAR_LSBFE(spi->mode & SPI_LSB_FIRST ? 1 : 0)
|
|
| SPI_CTAR_PCSSCK(pcssck)
|
|
| SPI_CTAR_CSSCK(cssck)
|
|
| SPI_CTAR_PASC(pasc)
|
|
| SPI_CTAR_ASC(asc)
|
|
| SPI_CTAR_PBR(pbr)
|
|
| SPI_CTAR_BR(br);
|
|
|
|
spi_set_ctldata(spi, chip);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dspi_cleanup(struct spi_device *spi)
|
|
{
|
|
struct chip_data *chip = spi_get_ctldata((struct spi_device *)spi);
|
|
|
|
dev_dbg(&spi->dev, "spi_device %u.%u cleanup\n",
|
|
spi->master->bus_num, spi->chip_select);
|
|
|
|
kfree(chip);
|
|
}
|
|
|
|
static irqreturn_t dspi_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct fsl_dspi *dspi = (struct fsl_dspi *)dev_id;
|
|
struct spi_message *msg = dspi->cur_msg;
|
|
enum dspi_trans_mode trans_mode;
|
|
u32 spi_sr, spi_tcr;
|
|
u32 spi_tcnt, tcnt_diff;
|
|
int tx_word;
|
|
|
|
regmap_read(dspi->regmap, SPI_SR, &spi_sr);
|
|
regmap_write(dspi->regmap, SPI_SR, spi_sr);
|
|
|
|
|
|
if (spi_sr & (SPI_SR_EOQF | SPI_SR_TCFQF)) {
|
|
tx_word = is_double_byte_mode(dspi);
|
|
|
|
regmap_read(dspi->regmap, SPI_TCR, &spi_tcr);
|
|
spi_tcnt = SPI_TCR_GET_TCNT(spi_tcr);
|
|
/*
|
|
* The width of SPI Transfer Counter in SPI_TCR is 16bits,
|
|
* so the max couner is 65535. When the counter reach 65535,
|
|
* it will wrap around, counter reset to zero.
|
|
* spi_tcnt my be less than dspi->spi_tcnt, it means the
|
|
* counter already wrapped around.
|
|
* SPI Transfer Counter is a counter of transmitted frames.
|
|
* The size of frame maybe two bytes.
|
|
*/
|
|
tcnt_diff = ((spi_tcnt + SPI_TCR_TCNT_MAX) - dspi->spi_tcnt)
|
|
% SPI_TCR_TCNT_MAX;
|
|
tcnt_diff *= (tx_word + 1);
|
|
if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM)
|
|
tcnt_diff--;
|
|
|
|
msg->actual_length += tcnt_diff;
|
|
|
|
dspi->spi_tcnt = spi_tcnt;
|
|
|
|
trans_mode = dspi->devtype_data->trans_mode;
|
|
switch (trans_mode) {
|
|
case DSPI_EOQ_MODE:
|
|
dspi_eoq_read(dspi);
|
|
break;
|
|
case DSPI_TCFQ_MODE:
|
|
dspi_tcfq_read(dspi);
|
|
break;
|
|
default:
|
|
dev_err(&dspi->pdev->dev, "unsupported trans_mode %u\n",
|
|
trans_mode);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
if (!dspi->len) {
|
|
if (dspi->dataflags & TRAN_STATE_WORD_ODD_NUM) {
|
|
regmap_update_bits(dspi->regmap,
|
|
SPI_CTAR(0),
|
|
SPI_FRAME_BITS_MASK,
|
|
SPI_FRAME_BITS(16));
|
|
dspi->dataflags &= ~TRAN_STATE_WORD_ODD_NUM;
|
|
}
|
|
|
|
dspi->waitflags = 1;
|
|
wake_up_interruptible(&dspi->waitq);
|
|
} else {
|
|
switch (trans_mode) {
|
|
case DSPI_EOQ_MODE:
|
|
dspi_eoq_write(dspi);
|
|
break;
|
|
case DSPI_TCFQ_MODE:
|
|
dspi_tcfq_write(dspi);
|
|
break;
|
|
default:
|
|
dev_err(&dspi->pdev->dev,
|
|
"unsupported trans_mode %u\n",
|
|
trans_mode);
|
|
}
|
|
}
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static const struct of_device_id fsl_dspi_dt_ids[] = {
|
|
{ .compatible = "fsl,vf610-dspi", .data = (void *)&vf610_data, },
|
|
{ .compatible = "fsl,ls1021a-v1.0-dspi",
|
|
.data = (void *)&ls1021a_v1_data, },
|
|
{ .compatible = "fsl,ls2085a-dspi", .data = (void *)&ls2085a_data, },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, fsl_dspi_dt_ids);
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int dspi_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
|
|
spi_master_suspend(master);
|
|
clk_disable_unprepare(dspi->clk);
|
|
|
|
pinctrl_pm_select_sleep_state(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dspi_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
|
|
pinctrl_pm_select_default_state(dev);
|
|
|
|
clk_prepare_enable(dspi->clk);
|
|
spi_master_resume(master);
|
|
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static SIMPLE_DEV_PM_OPS(dspi_pm, dspi_suspend, dspi_resume);
|
|
|
|
static const struct regmap_config dspi_regmap_config = {
|
|
.reg_bits = 32,
|
|
.val_bits = 32,
|
|
.reg_stride = 4,
|
|
.max_register = 0x88,
|
|
};
|
|
|
|
static int dspi_probe(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node;
|
|
struct spi_master *master;
|
|
struct fsl_dspi *dspi;
|
|
struct resource *res;
|
|
void __iomem *base;
|
|
int ret = 0, cs_num, bus_num;
|
|
const struct of_device_id *of_id =
|
|
of_match_device(fsl_dspi_dt_ids, &pdev->dev);
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(struct fsl_dspi));
|
|
if (!master)
|
|
return -ENOMEM;
|
|
|
|
dspi = spi_master_get_devdata(master);
|
|
dspi->pdev = pdev;
|
|
dspi->master = master;
|
|
|
|
master->transfer = NULL;
|
|
master->setup = dspi_setup;
|
|
master->transfer_one_message = dspi_transfer_one_message;
|
|
master->dev.of_node = pdev->dev.of_node;
|
|
|
|
master->cleanup = dspi_cleanup;
|
|
master->mode_bits = SPI_CPOL | SPI_CPHA;
|
|
master->bits_per_word_mask = SPI_BPW_MASK(4) | SPI_BPW_MASK(8) |
|
|
SPI_BPW_MASK(16);
|
|
|
|
ret = of_property_read_u32(np, "spi-num-chipselects", &cs_num);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't get spi-num-chipselects\n");
|
|
goto out_master_put;
|
|
}
|
|
master->num_chipselect = cs_num;
|
|
|
|
ret = of_property_read_u32(np, "bus-num", &bus_num);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "can't get bus-num\n");
|
|
goto out_master_put;
|
|
}
|
|
master->bus_num = bus_num;
|
|
|
|
dspi->devtype_data = (struct fsl_dspi_devtype_data *)of_id->data;
|
|
if (!dspi->devtype_data) {
|
|
dev_err(&pdev->dev, "can't get devtype_data\n");
|
|
ret = -EFAULT;
|
|
goto out_master_put;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
base = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(base)) {
|
|
ret = PTR_ERR(base);
|
|
goto out_master_put;
|
|
}
|
|
|
|
dspi->regmap = devm_regmap_init_mmio_clk(&pdev->dev, NULL, base,
|
|
&dspi_regmap_config);
|
|
if (IS_ERR(dspi->regmap)) {
|
|
dev_err(&pdev->dev, "failed to init regmap: %ld\n",
|
|
PTR_ERR(dspi->regmap));
|
|
return PTR_ERR(dspi->regmap);
|
|
}
|
|
|
|
dspi->irq = platform_get_irq(pdev, 0);
|
|
if (dspi->irq < 0) {
|
|
dev_err(&pdev->dev, "can't get platform irq\n");
|
|
ret = dspi->irq;
|
|
goto out_master_put;
|
|
}
|
|
|
|
ret = devm_request_irq(&pdev->dev, dspi->irq, dspi_interrupt, 0,
|
|
pdev->name, dspi);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Unable to attach DSPI interrupt\n");
|
|
goto out_master_put;
|
|
}
|
|
|
|
dspi->clk = devm_clk_get(&pdev->dev, "dspi");
|
|
if (IS_ERR(dspi->clk)) {
|
|
ret = PTR_ERR(dspi->clk);
|
|
dev_err(&pdev->dev, "unable to get clock\n");
|
|
goto out_master_put;
|
|
}
|
|
clk_prepare_enable(dspi->clk);
|
|
|
|
init_waitqueue_head(&dspi->waitq);
|
|
platform_set_drvdata(pdev, master);
|
|
|
|
ret = spi_register_master(master);
|
|
if (ret != 0) {
|
|
dev_err(&pdev->dev, "Problem registering DSPI master\n");
|
|
goto out_clk_put;
|
|
}
|
|
|
|
return ret;
|
|
|
|
out_clk_put:
|
|
clk_disable_unprepare(dspi->clk);
|
|
out_master_put:
|
|
spi_master_put(master);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dspi_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct fsl_dspi *dspi = spi_master_get_devdata(master);
|
|
|
|
/* Disconnect from the SPI framework */
|
|
clk_disable_unprepare(dspi->clk);
|
|
spi_unregister_master(dspi->master);
|
|
spi_master_put(dspi->master);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver fsl_dspi_driver = {
|
|
.driver.name = DRIVER_NAME,
|
|
.driver.of_match_table = fsl_dspi_dt_ids,
|
|
.driver.owner = THIS_MODULE,
|
|
.driver.pm = &dspi_pm,
|
|
.probe = dspi_probe,
|
|
.remove = dspi_remove,
|
|
};
|
|
module_platform_driver(fsl_dspi_driver);
|
|
|
|
MODULE_DESCRIPTION("Freescale DSPI Controller Driver");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRIVER_NAME);
|