mirror of
https://github.com/torvalds/linux.git
synced 2024-09-21 23:43:02 +00:00
3149ac489f
This commit allows this driver to support some models which M-Audio produces with DM1000 but its firmware is special. They are: - Firewire 1814 - ProjectMix I/O They have heavily customized firmware. The usual operations can't be applied to them. For this reason, this commit adds a model specific member to 'struct snd_bebob' and some model specific functions. Some parameters are write-only so this commit also adds control interface for applications to set them. M-Audio special firmware quirks: - Just after powering on, they wait to download firmware. This state is changed when receiving cue. Then bus reset is generated and the device is recognized as a different model with the uploaded firmware. - They don't respond against BridgeCo AV/C extension commands. So drivers can't get their stream formations and so on. - They do not start to transmit packets only by establishing connection but also by receiving SIGNAL FORMAT command. - After booting up, they often fail to send response against driver's request due to mismatch of gap_count. This module don't support to upload firmware. Tested-by: Darren Anderson <darrena092@gmail.com> (ProjectMix I/O) Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
124 lines
3.6 KiB
Plaintext
124 lines
3.6 KiB
Plaintext
menuconfig SND_FIREWIRE
|
|
bool "FireWire sound devices"
|
|
depends on FIREWIRE
|
|
default y
|
|
help
|
|
Support for IEEE-1394/FireWire/iLink sound devices.
|
|
|
|
if SND_FIREWIRE && FIREWIRE
|
|
|
|
config SND_FIREWIRE_LIB
|
|
tristate
|
|
depends on SND_PCM
|
|
|
|
config SND_DICE
|
|
tristate "DICE-based DACs (EXPERIMENTAL)"
|
|
select SND_HWDEP
|
|
select SND_PCM
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for many DACs based on the DICE
|
|
chip family (DICE-II/Jr/Mini) from TC Applied Technologies.
|
|
|
|
At the moment, this driver supports playback only. If you
|
|
want to use devices that support capturing, use FFADO instead.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-dice.
|
|
|
|
config SND_FIREWIRE_SPEAKERS
|
|
tristate "FireWire speakers"
|
|
select SND_PCM
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the Griffin FireWave Surround
|
|
and the LaCie FireWire Speakers.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-firewire-speakers.
|
|
|
|
config SND_ISIGHT
|
|
tristate "Apple iSight microphone"
|
|
select SND_PCM
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the front and rear microphones
|
|
of the Apple iSight web camera.
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-isight.
|
|
|
|
config SND_SCS1X
|
|
tristate "Stanton Control System 1 MIDI"
|
|
select SND_PCM
|
|
select SND_RAWMIDI
|
|
select SND_FIREWIRE_LIB
|
|
help
|
|
Say Y here to include support for the MIDI ports of the Stanton
|
|
SCS.1d/SCS.1m DJ controllers. (SCS.1m audio is still handled
|
|
by FFADO.)
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-scs1x.
|
|
|
|
config SND_FIREWORKS
|
|
tristate "Echo Fireworks board module support"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on Echo Digital Audio Fireworks board:
|
|
* Mackie Onyx 400F/1200F
|
|
* Echo AudioFire12/8(until 2009 July)
|
|
* Echo AudioFire2/4/Pre8/8(since 2009 July)
|
|
* Echo Fireworks 8/HDMI
|
|
* Gibson Robot Interface Pack/GoldTop
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-fireworks.
|
|
|
|
config SND_BEBOB
|
|
tristate "BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware"
|
|
select SND_FIREWIRE_LIB
|
|
select SND_RAWMIDI
|
|
select SND_PCM
|
|
select SND_HWDEP
|
|
help
|
|
Say Y here to include support for FireWire devices based
|
|
on BridgeCo DM1000/DM1100/DM1500 with BeBoB firmware:
|
|
* Edirol FA-66/FA-101
|
|
* PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
|
|
* BridgeCo RDAudio1/Audio5
|
|
* Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
|
|
* Mackie d.2 (Firewire Option)
|
|
* Stanton FinalScratch 2 (ScratchAmp)
|
|
* Tascam IF-FW/DM
|
|
* Behringer XENIX UFX 1204/1604
|
|
* Behringer Digital Mixer X32 series (X-UF Card)
|
|
* Apogee Rosetta 200/400 (X-FireWire card)
|
|
* Apogee DA/AD/DD-16X (X-FireWire card)
|
|
* Apogee Ensemble
|
|
* ESI Quotafire610
|
|
* AcousticReality eARMasterOne
|
|
* CME MatrixKFW
|
|
* Phonic Helix Board 12 MkII/18 MkII/24 MkII
|
|
* Phonic Helix Board 12 Universal/18 Universal/24 Universal
|
|
* Lynx Aurora 8/16 (LT-FW)
|
|
* ICON FireXon
|
|
* PrismSound Orpheus/ADA-8XR
|
|
* TerraTec PHASE 24 FW/PHASE X24 FW/PHASE 88 Rack FW
|
|
* Terratec EWS MIC2/EWS MIC4
|
|
* Terratec Aureon 7.1 Firewire
|
|
* Yamaha GO44/GO46
|
|
* Focusrite Saffire/Saffire LE/SaffirePro10 IO/SaffirePro26 IO
|
|
* M-Audio Firewire410/AudioPhile/Solo
|
|
* M-Audio Ozonic/NRV10/ProfireLightBridge
|
|
* M-Audio Firewire 1814/ProjectMix IO
|
|
|
|
To compile this driver as a module, choose M here: the module
|
|
will be called snd-bebob.
|
|
|
|
endif # SND_FIREWIRE
|