mirror of
https://github.com/torvalds/linux.git
synced 2024-11-15 00:21:59 +00:00
bd3d99c170
The EMI support in pciehp is obviously broken. It is implemented using struct hotplug_slot_attribute, but sysfs_ops for pci_slot_ktype is NOT for struct hotplug_slot_attribute, but for struct pci_slot_attribute. This bug had been there for a long time, maybe it was introduced when PCI slot framework was introduced. The reason why this bug didn't cause any problem is maybe the EMI support is not tested at all because of lack of test environment. As described above, the EMI support in pciehp seems not to be tested at all. So this patch removes EMI support from pciehp, instead of fixing the bug. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
1098 lines
28 KiB
C
1098 lines
28 KiB
C
/*
|
|
* PCI Express PCI Hot Plug Driver
|
|
*
|
|
* Copyright (C) 1995,2001 Compaq Computer Corporation
|
|
* Copyright (C) 2001 Greg Kroah-Hartman (greg@kroah.com)
|
|
* Copyright (C) 2001 IBM Corp.
|
|
* Copyright (C) 2003-2004 Intel Corporation
|
|
*
|
|
* All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or (at
|
|
* your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
|
|
* NON INFRINGEMENT. See the GNU General Public License for more
|
|
* details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Send feedback to <greg@kroah.com>,<kristen.c.accardi@intel.com>
|
|
*
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/jiffies.h>
|
|
#include <linux/timer.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/time.h>
|
|
|
|
#include "../pci.h"
|
|
#include "pciehp.h"
|
|
|
|
static atomic_t pciehp_num_controllers = ATOMIC_INIT(0);
|
|
|
|
static inline int pciehp_readw(struct controller *ctrl, int reg, u16 *value)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
return pci_read_config_word(dev, ctrl->cap_base + reg, value);
|
|
}
|
|
|
|
static inline int pciehp_readl(struct controller *ctrl, int reg, u32 *value)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
return pci_read_config_dword(dev, ctrl->cap_base + reg, value);
|
|
}
|
|
|
|
static inline int pciehp_writew(struct controller *ctrl, int reg, u16 value)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
return pci_write_config_word(dev, ctrl->cap_base + reg, value);
|
|
}
|
|
|
|
static inline int pciehp_writel(struct controller *ctrl, int reg, u32 value)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
return pci_write_config_dword(dev, ctrl->cap_base + reg, value);
|
|
}
|
|
|
|
/* Power Control Command */
|
|
#define POWER_ON 0
|
|
#define POWER_OFF PCI_EXP_SLTCTL_PCC
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id);
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec);
|
|
|
|
/* This is the interrupt polling timeout function. */
|
|
static void int_poll_timeout(unsigned long data)
|
|
{
|
|
struct controller *ctrl = (struct controller *)data;
|
|
|
|
/* Poll for interrupt events. regs == NULL => polling */
|
|
pcie_isr(0, ctrl);
|
|
|
|
init_timer(&ctrl->poll_timer);
|
|
if (!pciehp_poll_time)
|
|
pciehp_poll_time = 2; /* default polling interval is 2 sec */
|
|
|
|
start_int_poll_timer(ctrl, pciehp_poll_time);
|
|
}
|
|
|
|
/* This function starts the interrupt polling timer. */
|
|
static void start_int_poll_timer(struct controller *ctrl, int sec)
|
|
{
|
|
/* Clamp to sane value */
|
|
if ((sec <= 0) || (sec > 60))
|
|
sec = 2;
|
|
|
|
ctrl->poll_timer.function = &int_poll_timeout;
|
|
ctrl->poll_timer.data = (unsigned long)ctrl;
|
|
ctrl->poll_timer.expires = jiffies + sec * HZ;
|
|
add_timer(&ctrl->poll_timer);
|
|
}
|
|
|
|
static inline int pciehp_request_irq(struct controller *ctrl)
|
|
{
|
|
int retval, irq = ctrl->pcie->irq;
|
|
|
|
/* Install interrupt polling timer. Start with 10 sec delay */
|
|
if (pciehp_poll_mode) {
|
|
init_timer(&ctrl->poll_timer);
|
|
start_int_poll_timer(ctrl, 10);
|
|
return 0;
|
|
}
|
|
|
|
/* Installs the interrupt handler */
|
|
retval = request_irq(irq, pcie_isr, IRQF_SHARED, MY_NAME, ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "Cannot get irq %d for the hotplug controller\n",
|
|
irq);
|
|
return retval;
|
|
}
|
|
|
|
static inline void pciehp_free_irq(struct controller *ctrl)
|
|
{
|
|
if (pciehp_poll_mode)
|
|
del_timer_sync(&ctrl->poll_timer);
|
|
else
|
|
free_irq(ctrl->pcie->irq, ctrl);
|
|
}
|
|
|
|
static int pcie_poll_cmd(struct controller *ctrl)
|
|
{
|
|
u16 slot_status;
|
|
int err, timeout = 1000;
|
|
|
|
err = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (!err && (slot_status & PCI_EXP_SLTSTA_CC)) {
|
|
pciehp_writew(ctrl, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_CC);
|
|
return 1;
|
|
}
|
|
while (timeout > 0) {
|
|
msleep(10);
|
|
timeout -= 10;
|
|
err = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (!err && (slot_status & PCI_EXP_SLTSTA_CC)) {
|
|
pciehp_writew(ctrl, PCI_EXP_SLTSTA, PCI_EXP_SLTSTA_CC);
|
|
return 1;
|
|
}
|
|
}
|
|
return 0; /* timeout */
|
|
}
|
|
|
|
static void pcie_wait_cmd(struct controller *ctrl, int poll)
|
|
{
|
|
unsigned int msecs = pciehp_poll_mode ? 2500 : 1000;
|
|
unsigned long timeout = msecs_to_jiffies(msecs);
|
|
int rc;
|
|
|
|
if (poll)
|
|
rc = pcie_poll_cmd(ctrl);
|
|
else
|
|
rc = wait_event_timeout(ctrl->queue, !ctrl->cmd_busy, timeout);
|
|
if (!rc)
|
|
ctrl_dbg(ctrl, "Command not completed in 1000 msec\n");
|
|
}
|
|
|
|
/**
|
|
* pcie_write_cmd - Issue controller command
|
|
* @ctrl: controller to which the command is issued
|
|
* @cmd: command value written to slot control register
|
|
* @mask: bitmask of slot control register to be modified
|
|
*/
|
|
static int pcie_write_cmd(struct controller *ctrl, u16 cmd, u16 mask)
|
|
{
|
|
int retval = 0;
|
|
u16 slot_status;
|
|
u16 slot_ctrl;
|
|
|
|
mutex_lock(&ctrl->ctrl_lock);
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTSTATUS register\n",
|
|
__func__);
|
|
goto out;
|
|
}
|
|
|
|
if (slot_status & PCI_EXP_SLTSTA_CC) {
|
|
if (!ctrl->no_cmd_complete) {
|
|
/*
|
|
* After 1 sec and CMD_COMPLETED still not set, just
|
|
* proceed forward to issue the next command according
|
|
* to spec. Just print out the error message.
|
|
*/
|
|
ctrl_dbg(ctrl, "CMD_COMPLETED not clear after 1 sec\n");
|
|
} else if (!NO_CMD_CMPL(ctrl)) {
|
|
/*
|
|
* This controller semms to notify of command completed
|
|
* event even though it supports none of power
|
|
* controller, attention led, power led and EMI.
|
|
*/
|
|
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Need to "
|
|
"wait for command completed event.\n");
|
|
ctrl->no_cmd_complete = 0;
|
|
} else {
|
|
ctrl_dbg(ctrl, "Unexpected CMD_COMPLETED. Maybe "
|
|
"the controller is broken.\n");
|
|
}
|
|
}
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTCTRL register\n", __func__);
|
|
goto out;
|
|
}
|
|
|
|
slot_ctrl &= ~mask;
|
|
slot_ctrl |= (cmd & mask);
|
|
ctrl->cmd_busy = 1;
|
|
smp_mb();
|
|
retval = pciehp_writew(ctrl, PCI_EXP_SLTCTL, slot_ctrl);
|
|
if (retval)
|
|
ctrl_err(ctrl, "Cannot write to SLOTCTRL register\n");
|
|
|
|
/*
|
|
* Wait for command completion.
|
|
*/
|
|
if (!retval && !ctrl->no_cmd_complete) {
|
|
int poll = 0;
|
|
/*
|
|
* if hotplug interrupt is not enabled or command
|
|
* completed interrupt is not enabled, we need to poll
|
|
* command completed event.
|
|
*/
|
|
if (!(slot_ctrl & PCI_EXP_SLTCTL_HPIE) ||
|
|
!(slot_ctrl & PCI_EXP_SLTCTL_CCIE))
|
|
poll = 1;
|
|
pcie_wait_cmd(ctrl, poll);
|
|
}
|
|
out:
|
|
mutex_unlock(&ctrl->ctrl_lock);
|
|
return retval;
|
|
}
|
|
|
|
static inline int check_link_active(struct controller *ctrl)
|
|
{
|
|
u16 link_status;
|
|
|
|
if (pciehp_readw(ctrl, PCI_EXP_LNKSTA, &link_status))
|
|
return 0;
|
|
return !!(link_status & PCI_EXP_LNKSTA_DLLLA);
|
|
}
|
|
|
|
static void pcie_wait_link_active(struct controller *ctrl)
|
|
{
|
|
int timeout = 1000;
|
|
|
|
if (check_link_active(ctrl))
|
|
return;
|
|
while (timeout > 0) {
|
|
msleep(10);
|
|
timeout -= 10;
|
|
if (check_link_active(ctrl))
|
|
return;
|
|
}
|
|
ctrl_dbg(ctrl, "Data Link Layer Link Active not set in 1000 msec\n");
|
|
}
|
|
|
|
static int hpc_check_lnk_status(struct controller *ctrl)
|
|
{
|
|
u16 lnk_status;
|
|
int retval = 0;
|
|
|
|
/*
|
|
* Data Link Layer Link Active Reporting must be capable for
|
|
* hot-plug capable downstream port. But old controller might
|
|
* not implement it. In this case, we wait for 1000 ms.
|
|
*/
|
|
if (ctrl->link_active_reporting){
|
|
/* Wait for Data Link Layer Link Active bit to be set */
|
|
pcie_wait_link_active(ctrl);
|
|
/*
|
|
* We must wait for 100 ms after the Data Link Layer
|
|
* Link Active bit reads 1b before initiating a
|
|
* configuration access to the hot added device.
|
|
*/
|
|
msleep(100);
|
|
} else
|
|
msleep(1000);
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Cannot read LNKSTATUS register\n");
|
|
return retval;
|
|
}
|
|
|
|
ctrl_dbg(ctrl, "%s: lnk_status = %x\n", __func__, lnk_status);
|
|
if ((lnk_status & PCI_EXP_LNKSTA_LT) ||
|
|
!(lnk_status & PCI_EXP_LNKSTA_NLW)) {
|
|
ctrl_err(ctrl, "Link Training Error occurs \n");
|
|
retval = -1;
|
|
return retval;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int hpc_get_attention_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_ctrl;
|
|
u8 atten_led_state;
|
|
int retval = 0;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTCTRL register\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x, value read %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
atten_led_state = (slot_ctrl & PCI_EXP_SLTCTL_AIC) >> 6;
|
|
|
|
switch (atten_led_state) {
|
|
case 0:
|
|
*status = 0xFF; /* Reserved */
|
|
break;
|
|
case 1:
|
|
*status = 1; /* On */
|
|
break;
|
|
case 2:
|
|
*status = 2; /* Blink */
|
|
break;
|
|
case 3:
|
|
*status = 0; /* Off */
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int hpc_get_power_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_ctrl;
|
|
u8 pwr_state;
|
|
int retval = 0;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTCTL, &slot_ctrl);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTCTRL register\n", __func__);
|
|
return retval;
|
|
}
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x value read %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_ctrl);
|
|
|
|
pwr_state = (slot_ctrl & PCI_EXP_SLTCTL_PCC) >> 10;
|
|
|
|
switch (pwr_state) {
|
|
case 0:
|
|
*status = 1;
|
|
break;
|
|
case 1:
|
|
*status = 0;
|
|
break;
|
|
default:
|
|
*status = 0xFF;
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int hpc_get_latch_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_MRLSS);
|
|
return 0;
|
|
}
|
|
|
|
static int hpc_get_adapter_status(struct slot *slot, u8 *status)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
*status = !!(slot_status & PCI_EXP_SLTSTA_PDS);
|
|
return 0;
|
|
}
|
|
|
|
static int hpc_query_power_fault(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_status;
|
|
int retval;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Cannot check for power fault\n");
|
|
return retval;
|
|
}
|
|
return !!(slot_status & PCI_EXP_SLTSTA_PFD);
|
|
}
|
|
|
|
static int hpc_set_attention_status(struct slot *slot, u8 value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
int rc;
|
|
|
|
cmd_mask = PCI_EXP_SLTCTL_AIC;
|
|
switch (value) {
|
|
case 0 : /* turn off */
|
|
slot_cmd = 0x00C0;
|
|
break;
|
|
case 1: /* turn on */
|
|
slot_cmd = 0x0040;
|
|
break;
|
|
case 2: /* turn blink */
|
|
slot_cmd = 0x0080;
|
|
break;
|
|
default:
|
|
return -1;
|
|
}
|
|
rc = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static void hpc_set_green_led_on(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
|
|
slot_cmd = 0x0100;
|
|
cmd_mask = PCI_EXP_SLTCTL_PIC;
|
|
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
}
|
|
|
|
static void hpc_set_green_led_off(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
|
|
slot_cmd = 0x0300;
|
|
cmd_mask = PCI_EXP_SLTCTL_PIC;
|
|
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
}
|
|
|
|
static void hpc_set_green_led_blink(struct slot *slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
|
|
slot_cmd = 0x0200;
|
|
cmd_mask = PCI_EXP_SLTCTL_PIC;
|
|
pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
}
|
|
|
|
static int hpc_power_on_slot(struct slot * slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
u16 slot_status;
|
|
int retval = 0;
|
|
|
|
ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
|
|
|
|
/* Clear sticky power-fault bit from previous power failures */
|
|
retval = pciehp_readw(ctrl, PCI_EXP_SLTSTA, &slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
slot_status &= PCI_EXP_SLTSTA_PFD;
|
|
if (slot_status) {
|
|
retval = pciehp_writew(ctrl, PCI_EXP_SLTSTA, slot_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl,
|
|
"%s: Cannot write to SLOTSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
}
|
|
|
|
slot_cmd = POWER_ON;
|
|
cmd_mask = PCI_EXP_SLTCTL_PCC;
|
|
if (!pciehp_poll_mode) {
|
|
/* Enable power fault detection turned off at power off time */
|
|
slot_cmd |= PCI_EXP_SLTCTL_PFDE;
|
|
cmd_mask |= PCI_EXP_SLTCTL_PFDE;
|
|
}
|
|
|
|
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Write %x command failed!\n", slot_cmd);
|
|
return retval;
|
|
}
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
|
|
ctrl->power_fault_detected = 0;
|
|
return retval;
|
|
}
|
|
|
|
static inline int pcie_mask_bad_dllp(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
int pos;
|
|
u32 reg;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return 0;
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®);
|
|
if (reg & PCI_ERR_COR_BAD_DLLP)
|
|
return 0;
|
|
reg |= PCI_ERR_COR_BAD_DLLP;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
|
|
return 1;
|
|
}
|
|
|
|
static inline void pcie_unmask_bad_dllp(struct controller *ctrl)
|
|
{
|
|
struct pci_dev *dev = ctrl->pci_dev;
|
|
u32 reg;
|
|
int pos;
|
|
|
|
pos = pci_find_ext_capability(dev, PCI_EXT_CAP_ID_ERR);
|
|
if (!pos)
|
|
return;
|
|
pci_read_config_dword(dev, pos + PCI_ERR_COR_MASK, ®);
|
|
if (!(reg & PCI_ERR_COR_BAD_DLLP))
|
|
return;
|
|
reg &= ~PCI_ERR_COR_BAD_DLLP;
|
|
pci_write_config_dword(dev, pos + PCI_ERR_COR_MASK, reg);
|
|
}
|
|
|
|
static int hpc_power_off_slot(struct slot * slot)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
u16 slot_cmd;
|
|
u16 cmd_mask;
|
|
int retval = 0;
|
|
int changed;
|
|
|
|
ctrl_dbg(ctrl, "%s: slot->hp_slot %x\n", __func__, slot->hp_slot);
|
|
|
|
/*
|
|
* Set Bad DLLP Mask bit in Correctable Error Mask
|
|
* Register. This is the workaround against Bad DLLP error
|
|
* that sometimes happens during turning power off the slot
|
|
* which conforms to PCI Express 1.0a spec.
|
|
*/
|
|
changed = pcie_mask_bad_dllp(ctrl);
|
|
|
|
slot_cmd = POWER_OFF;
|
|
cmd_mask = PCI_EXP_SLTCTL_PCC;
|
|
if (!pciehp_poll_mode) {
|
|
/* Disable power fault detection */
|
|
slot_cmd &= ~PCI_EXP_SLTCTL_PFDE;
|
|
cmd_mask |= PCI_EXP_SLTCTL_PFDE;
|
|
}
|
|
|
|
retval = pcie_write_cmd(ctrl, slot_cmd, cmd_mask);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "Write command failed!\n");
|
|
retval = -1;
|
|
goto out;
|
|
}
|
|
ctrl_dbg(ctrl, "%s: SLOTCTRL %x write cmd %x\n",
|
|
__func__, ctrl->cap_base + PCI_EXP_SLTCTL, slot_cmd);
|
|
out:
|
|
if (changed)
|
|
pcie_unmask_bad_dllp(ctrl);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static irqreturn_t pcie_isr(int irq, void *dev_id)
|
|
{
|
|
struct controller *ctrl = (struct controller *)dev_id;
|
|
u16 detected, intr_loc;
|
|
struct slot *p_slot;
|
|
|
|
/*
|
|
* In order to guarantee that all interrupt events are
|
|
* serviced, we need to re-inspect Slot Status register after
|
|
* clearing what is presumed to be the last pending interrupt.
|
|
*/
|
|
intr_loc = 0;
|
|
do {
|
|
if (pciehp_readw(ctrl, PCI_EXP_SLTSTA, &detected)) {
|
|
ctrl_err(ctrl, "%s: Cannot read SLOTSTATUS\n",
|
|
__func__);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
detected &= (PCI_EXP_SLTSTA_ABP | PCI_EXP_SLTSTA_PFD |
|
|
PCI_EXP_SLTSTA_MRLSC | PCI_EXP_SLTSTA_PDC |
|
|
PCI_EXP_SLTSTA_CC);
|
|
detected &= ~intr_loc;
|
|
intr_loc |= detected;
|
|
if (!intr_loc)
|
|
return IRQ_NONE;
|
|
if (detected && pciehp_writew(ctrl, PCI_EXP_SLTSTA, intr_loc)) {
|
|
ctrl_err(ctrl, "%s: Cannot write to SLOTSTATUS\n",
|
|
__func__);
|
|
return IRQ_NONE;
|
|
}
|
|
} while (detected);
|
|
|
|
ctrl_dbg(ctrl, "%s: intr_loc %x\n", __func__, intr_loc);
|
|
|
|
/* Check Command Complete Interrupt Pending */
|
|
if (intr_loc & PCI_EXP_SLTSTA_CC) {
|
|
ctrl->cmd_busy = 0;
|
|
smp_mb();
|
|
wake_up(&ctrl->queue);
|
|
}
|
|
|
|
if (!(intr_loc & ~PCI_EXP_SLTSTA_CC))
|
|
return IRQ_HANDLED;
|
|
|
|
p_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset);
|
|
|
|
/* Check MRL Sensor Changed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_MRLSC)
|
|
pciehp_handle_switch_change(p_slot);
|
|
|
|
/* Check Attention Button Pressed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_ABP)
|
|
pciehp_handle_attention_button(p_slot);
|
|
|
|
/* Check Presence Detect Changed */
|
|
if (intr_loc & PCI_EXP_SLTSTA_PDC)
|
|
pciehp_handle_presence_change(p_slot);
|
|
|
|
/* Check Power Fault Detected */
|
|
if ((intr_loc & PCI_EXP_SLTSTA_PFD) && !ctrl->power_fault_detected) {
|
|
ctrl->power_fault_detected = 1;
|
|
pciehp_handle_power_fault(p_slot);
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int hpc_get_max_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
enum pcie_link_speed lnk_speed;
|
|
u32 lnk_cap;
|
|
int retval = 0;
|
|
|
|
retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
switch (lnk_cap & 0x000F) {
|
|
case 1:
|
|
lnk_speed = PCIE_2PT5GB;
|
|
break;
|
|
default:
|
|
lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
*value = lnk_speed;
|
|
ctrl_dbg(ctrl, "Max link speed = %d\n", lnk_speed);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int hpc_get_max_lnk_width(struct slot *slot,
|
|
enum pcie_link_width *value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
enum pcie_link_width lnk_wdth;
|
|
u32 lnk_cap;
|
|
int retval = 0;
|
|
|
|
retval = pciehp_readl(ctrl, PCI_EXP_LNKCAP, &lnk_cap);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
|
|
return retval;
|
|
}
|
|
|
|
switch ((lnk_cap & PCI_EXP_LNKSTA_NLW) >> 4){
|
|
case 0:
|
|
lnk_wdth = PCIE_LNK_WIDTH_RESRV;
|
|
break;
|
|
case 1:
|
|
lnk_wdth = PCIE_LNK_X1;
|
|
break;
|
|
case 2:
|
|
lnk_wdth = PCIE_LNK_X2;
|
|
break;
|
|
case 4:
|
|
lnk_wdth = PCIE_LNK_X4;
|
|
break;
|
|
case 8:
|
|
lnk_wdth = PCIE_LNK_X8;
|
|
break;
|
|
case 12:
|
|
lnk_wdth = PCIE_LNK_X12;
|
|
break;
|
|
case 16:
|
|
lnk_wdth = PCIE_LNK_X16;
|
|
break;
|
|
case 32:
|
|
lnk_wdth = PCIE_LNK_X32;
|
|
break;
|
|
default:
|
|
lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
*value = lnk_wdth;
|
|
ctrl_dbg(ctrl, "Max link width = %d\n", lnk_wdth);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int hpc_get_cur_lnk_speed(struct slot *slot, enum pci_bus_speed *value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
enum pcie_link_speed lnk_speed = PCI_SPEED_UNKNOWN;
|
|
int retval = 0;
|
|
u16 lnk_status;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
|
|
switch (lnk_status & PCI_EXP_LNKSTA_CLS) {
|
|
case 1:
|
|
lnk_speed = PCIE_2PT5GB;
|
|
break;
|
|
default:
|
|
lnk_speed = PCIE_LNK_SPEED_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
*value = lnk_speed;
|
|
ctrl_dbg(ctrl, "Current link speed = %d\n", lnk_speed);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int hpc_get_cur_lnk_width(struct slot *slot,
|
|
enum pcie_link_width *value)
|
|
{
|
|
struct controller *ctrl = slot->ctrl;
|
|
enum pcie_link_width lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
|
|
int retval = 0;
|
|
u16 lnk_status;
|
|
|
|
retval = pciehp_readw(ctrl, PCI_EXP_LNKSTA, &lnk_status);
|
|
if (retval) {
|
|
ctrl_err(ctrl, "%s: Cannot read LNKSTATUS register\n",
|
|
__func__);
|
|
return retval;
|
|
}
|
|
|
|
switch ((lnk_status & PCI_EXP_LNKSTA_NLW) >> 4){
|
|
case 0:
|
|
lnk_wdth = PCIE_LNK_WIDTH_RESRV;
|
|
break;
|
|
case 1:
|
|
lnk_wdth = PCIE_LNK_X1;
|
|
break;
|
|
case 2:
|
|
lnk_wdth = PCIE_LNK_X2;
|
|
break;
|
|
case 4:
|
|
lnk_wdth = PCIE_LNK_X4;
|
|
break;
|
|
case 8:
|
|
lnk_wdth = PCIE_LNK_X8;
|
|
break;
|
|
case 12:
|
|
lnk_wdth = PCIE_LNK_X12;
|
|
break;
|
|
case 16:
|
|
lnk_wdth = PCIE_LNK_X16;
|
|
break;
|
|
case 32:
|
|
lnk_wdth = PCIE_LNK_X32;
|
|
break;
|
|
default:
|
|
lnk_wdth = PCIE_LNK_WIDTH_UNKNOWN;
|
|
break;
|
|
}
|
|
|
|
*value = lnk_wdth;
|
|
ctrl_dbg(ctrl, "Current link width = %d\n", lnk_wdth);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static void pcie_release_ctrl(struct controller *ctrl);
|
|
static struct hpc_ops pciehp_hpc_ops = {
|
|
.power_on_slot = hpc_power_on_slot,
|
|
.power_off_slot = hpc_power_off_slot,
|
|
.set_attention_status = hpc_set_attention_status,
|
|
.get_power_status = hpc_get_power_status,
|
|
.get_attention_status = hpc_get_attention_status,
|
|
.get_latch_status = hpc_get_latch_status,
|
|
.get_adapter_status = hpc_get_adapter_status,
|
|
|
|
.get_max_bus_speed = hpc_get_max_lnk_speed,
|
|
.get_cur_bus_speed = hpc_get_cur_lnk_speed,
|
|
.get_max_lnk_width = hpc_get_max_lnk_width,
|
|
.get_cur_lnk_width = hpc_get_cur_lnk_width,
|
|
|
|
.query_power_fault = hpc_query_power_fault,
|
|
.green_led_on = hpc_set_green_led_on,
|
|
.green_led_off = hpc_set_green_led_off,
|
|
.green_led_blink = hpc_set_green_led_blink,
|
|
|
|
.release_ctlr = pcie_release_ctrl,
|
|
.check_lnk_status = hpc_check_lnk_status,
|
|
};
|
|
|
|
int pcie_enable_notification(struct controller *ctrl)
|
|
{
|
|
u16 cmd, mask;
|
|
|
|
cmd = PCI_EXP_SLTCTL_PDCE;
|
|
if (ATTN_BUTTN(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_ABPE;
|
|
if (POWER_CTRL(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_PFDE;
|
|
if (MRL_SENS(ctrl))
|
|
cmd |= PCI_EXP_SLTCTL_MRLSCE;
|
|
if (!pciehp_poll_mode)
|
|
cmd |= PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE;
|
|
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE);
|
|
|
|
if (pcie_write_cmd(ctrl, cmd, mask)) {
|
|
ctrl_err(ctrl, "Cannot enable software notification\n");
|
|
return -1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_disable_notification(struct controller *ctrl)
|
|
{
|
|
u16 mask;
|
|
mask = (PCI_EXP_SLTCTL_PDCE | PCI_EXP_SLTCTL_ABPE |
|
|
PCI_EXP_SLTCTL_MRLSCE | PCI_EXP_SLTCTL_PFDE |
|
|
PCI_EXP_SLTCTL_HPIE | PCI_EXP_SLTCTL_CCIE);
|
|
if (pcie_write_cmd(ctrl, 0, mask))
|
|
ctrl_warn(ctrl, "Cannot disable software notification\n");
|
|
}
|
|
|
|
int pcie_init_notification(struct controller *ctrl)
|
|
{
|
|
if (pciehp_request_irq(ctrl))
|
|
return -1;
|
|
if (pcie_enable_notification(ctrl)) {
|
|
pciehp_free_irq(ctrl);
|
|
return -1;
|
|
}
|
|
ctrl->notification_enabled = 1;
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_shutdown_notification(struct controller *ctrl)
|
|
{
|
|
if (ctrl->notification_enabled) {
|
|
pcie_disable_notification(ctrl);
|
|
pciehp_free_irq(ctrl);
|
|
ctrl->notification_enabled = 0;
|
|
}
|
|
}
|
|
|
|
static int pcie_init_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot;
|
|
|
|
slot = kzalloc(sizeof(*slot), GFP_KERNEL);
|
|
if (!slot)
|
|
return -ENOMEM;
|
|
|
|
slot->hp_slot = 0;
|
|
slot->ctrl = ctrl;
|
|
slot->bus = ctrl->pci_dev->subordinate->number;
|
|
slot->device = ctrl->slot_device_offset + slot->hp_slot;
|
|
slot->hpc_ops = ctrl->hpc_ops;
|
|
slot->number = ctrl->first_slot;
|
|
mutex_init(&slot->lock);
|
|
INIT_DELAYED_WORK(&slot->work, pciehp_queue_pushbutton_work);
|
|
list_add(&slot->slot_list, &ctrl->slot_list);
|
|
return 0;
|
|
}
|
|
|
|
static void pcie_cleanup_slot(struct controller *ctrl)
|
|
{
|
|
struct slot *slot;
|
|
slot = list_first_entry(&ctrl->slot_list, struct slot, slot_list);
|
|
list_del(&slot->slot_list);
|
|
cancel_delayed_work(&slot->work);
|
|
flush_scheduled_work();
|
|
flush_workqueue(pciehp_wq);
|
|
kfree(slot);
|
|
}
|
|
|
|
static inline void dbg_ctrl(struct controller *ctrl)
|
|
{
|
|
int i;
|
|
u16 reg16;
|
|
struct pci_dev *pdev = ctrl->pci_dev;
|
|
|
|
if (!pciehp_debug)
|
|
return;
|
|
|
|
ctrl_info(ctrl, "Hotplug Controller:\n");
|
|
ctrl_info(ctrl, " Seg/Bus/Dev/Func/IRQ : %s IRQ %d\n",
|
|
pci_name(pdev), pdev->irq);
|
|
ctrl_info(ctrl, " Vendor ID : 0x%04x\n", pdev->vendor);
|
|
ctrl_info(ctrl, " Device ID : 0x%04x\n", pdev->device);
|
|
ctrl_info(ctrl, " Subsystem ID : 0x%04x\n",
|
|
pdev->subsystem_device);
|
|
ctrl_info(ctrl, " Subsystem Vendor ID : 0x%04x\n",
|
|
pdev->subsystem_vendor);
|
|
ctrl_info(ctrl, " PCIe Cap offset : 0x%02x\n", ctrl->cap_base);
|
|
for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) {
|
|
if (!pci_resource_len(pdev, i))
|
|
continue;
|
|
ctrl_info(ctrl, " PCI resource [%d] : 0x%llx@0x%llx\n",
|
|
i, (unsigned long long)pci_resource_len(pdev, i),
|
|
(unsigned long long)pci_resource_start(pdev, i));
|
|
}
|
|
ctrl_info(ctrl, "Slot Capabilities : 0x%08x\n", ctrl->slot_cap);
|
|
ctrl_info(ctrl, " Physical Slot Number : %d\n", ctrl->first_slot);
|
|
ctrl_info(ctrl, " Attention Button : %3s\n",
|
|
ATTN_BUTTN(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Power Controller : %3s\n",
|
|
POWER_CTRL(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " MRL Sensor : %3s\n",
|
|
MRL_SENS(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Attention Indicator : %3s\n",
|
|
ATTN_LED(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Power Indicator : %3s\n",
|
|
PWR_LED(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Hot-Plug Surprise : %3s\n",
|
|
HP_SUPR_RM(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " EMI Present : %3s\n",
|
|
EMI(ctrl) ? "yes" : "no");
|
|
ctrl_info(ctrl, " Command Completed : %3s\n",
|
|
NO_CMD_CMPL(ctrl) ? "no" : "yes");
|
|
pciehp_readw(ctrl, PCI_EXP_SLTSTA, ®16);
|
|
ctrl_info(ctrl, "Slot Status : 0x%04x\n", reg16);
|
|
pciehp_readw(ctrl, PCI_EXP_SLTCTL, ®16);
|
|
ctrl_info(ctrl, "Slot Control : 0x%04x\n", reg16);
|
|
}
|
|
|
|
struct controller *pcie_init(struct pcie_device *dev)
|
|
{
|
|
struct controller *ctrl;
|
|
u32 slot_cap, link_cap;
|
|
struct pci_dev *pdev = dev->port;
|
|
|
|
ctrl = kzalloc(sizeof(*ctrl), GFP_KERNEL);
|
|
if (!ctrl) {
|
|
dev_err(&dev->device, "%s: Out of memory\n", __func__);
|
|
goto abort;
|
|
}
|
|
INIT_LIST_HEAD(&ctrl->slot_list);
|
|
|
|
ctrl->pcie = dev;
|
|
ctrl->pci_dev = pdev;
|
|
ctrl->cap_base = pci_find_capability(pdev, PCI_CAP_ID_EXP);
|
|
if (!ctrl->cap_base) {
|
|
ctrl_err(ctrl, "Cannot find PCI Express capability\n");
|
|
goto abort_ctrl;
|
|
}
|
|
if (pciehp_readl(ctrl, PCI_EXP_SLTCAP, &slot_cap)) {
|
|
ctrl_err(ctrl, "Cannot read SLOTCAP register\n");
|
|
goto abort_ctrl;
|
|
}
|
|
|
|
ctrl->slot_cap = slot_cap;
|
|
ctrl->first_slot = slot_cap >> 19;
|
|
ctrl->slot_device_offset = 0;
|
|
ctrl->num_slots = 1;
|
|
ctrl->hpc_ops = &pciehp_hpc_ops;
|
|
mutex_init(&ctrl->crit_sect);
|
|
mutex_init(&ctrl->ctrl_lock);
|
|
init_waitqueue_head(&ctrl->queue);
|
|
dbg_ctrl(ctrl);
|
|
/*
|
|
* Controller doesn't notify of command completion if the "No
|
|
* Command Completed Support" bit is set in Slot Capability
|
|
* register or the controller supports none of power
|
|
* controller, attention led, power led and EMI.
|
|
*/
|
|
if (NO_CMD_CMPL(ctrl) ||
|
|
!(POWER_CTRL(ctrl) | ATTN_LED(ctrl) | PWR_LED(ctrl) | EMI(ctrl)))
|
|
ctrl->no_cmd_complete = 1;
|
|
|
|
/* Check if Data Link Layer Link Active Reporting is implemented */
|
|
if (pciehp_readl(ctrl, PCI_EXP_LNKCAP, &link_cap)) {
|
|
ctrl_err(ctrl, "%s: Cannot read LNKCAP register\n", __func__);
|
|
goto abort_ctrl;
|
|
}
|
|
if (link_cap & PCI_EXP_LNKCAP_DLLLARC) {
|
|
ctrl_dbg(ctrl, "Link Active Reporting supported\n");
|
|
ctrl->link_active_reporting = 1;
|
|
}
|
|
|
|
/* Clear all remaining event bits in Slot Status register */
|
|
if (pciehp_writew(ctrl, PCI_EXP_SLTSTA, 0x1f))
|
|
goto abort_ctrl;
|
|
|
|
/* Disable sotfware notification */
|
|
pcie_disable_notification(ctrl);
|
|
|
|
/*
|
|
* If this is the first controller to be initialized,
|
|
* initialize the pciehp work queue
|
|
*/
|
|
if (atomic_add_return(1, &pciehp_num_controllers) == 1) {
|
|
pciehp_wq = create_singlethread_workqueue("pciehpd");
|
|
if (!pciehp_wq)
|
|
goto abort_ctrl;
|
|
}
|
|
|
|
ctrl_info(ctrl, "HPC vendor_id %x device_id %x ss_vid %x ss_did %x\n",
|
|
pdev->vendor, pdev->device, pdev->subsystem_vendor,
|
|
pdev->subsystem_device);
|
|
|
|
if (pcie_init_slot(ctrl))
|
|
goto abort_ctrl;
|
|
|
|
return ctrl;
|
|
|
|
abort_ctrl:
|
|
kfree(ctrl);
|
|
abort:
|
|
return NULL;
|
|
}
|
|
|
|
void pcie_release_ctrl(struct controller *ctrl)
|
|
{
|
|
pcie_shutdown_notification(ctrl);
|
|
pcie_cleanup_slot(ctrl);
|
|
/*
|
|
* If this is the last controller to be released, destroy the
|
|
* pciehp work queue
|
|
*/
|
|
if (atomic_dec_and_test(&pciehp_num_controllers))
|
|
destroy_workqueue(pciehp_wq);
|
|
kfree(ctrl);
|
|
}
|