mirror of
https://github.com/torvalds/linux.git
synced 2024-11-11 06:31:49 +00:00
498ab2fdf8
Qualcomm platforms have LAB(LCD AMOLED Boost)/IBB(Inverting Buck Boost) regulators, labibb for short, which are used as power supply for LCD Mode displays. This patch adds labibb regulator driver for pmi8998 PMIC, found on SDM845 platforms. [sumits: reworked the driver design as per upstream review] Signed-off-by: Nisha Kumari <nishakumari@codeaurora.org> Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org> Link: https://lore.kernel.org/r/20200622124110.20971-5-sumit.semwal@linaro.org Signed-off-by: Mark Brown <broonie@kernel.org>
176 lines
4.6 KiB
C
176 lines
4.6 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (c) 2020, The Linux Foundation. All rights reserved.
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/driver.h>
|
|
#include <linux/regulator/of_regulator.h>
|
|
|
|
#define REG_PERPH_TYPE 0x04
|
|
|
|
#define QCOM_LAB_TYPE 0x24
|
|
#define QCOM_IBB_TYPE 0x20
|
|
|
|
#define PMI8998_LAB_REG_BASE 0xde00
|
|
#define PMI8998_IBB_REG_BASE 0xdc00
|
|
|
|
#define REG_LABIBB_STATUS1 0x08
|
|
#define REG_LABIBB_ENABLE_CTL 0x46
|
|
#define LABIBB_STATUS1_VREG_OK_BIT BIT(7)
|
|
#define LABIBB_CONTROL_ENABLE BIT(7)
|
|
|
|
#define LAB_ENABLE_CTL_MASK BIT(7)
|
|
#define IBB_ENABLE_CTL_MASK (BIT(7) | BIT(6))
|
|
|
|
#define LABIBB_OFF_ON_DELAY 1000
|
|
#define LAB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 2)
|
|
#define IBB_ENABLE_TIME (LABIBB_OFF_ON_DELAY * 10)
|
|
#define LABIBB_POLL_ENABLED_TIME 1000
|
|
|
|
struct labibb_regulator {
|
|
struct regulator_desc desc;
|
|
struct device *dev;
|
|
struct regmap *regmap;
|
|
struct regulator_dev *rdev;
|
|
u16 base;
|
|
u8 type;
|
|
};
|
|
|
|
struct labibb_regulator_data {
|
|
const char *name;
|
|
u8 type;
|
|
u16 base;
|
|
struct regulator_desc *desc;
|
|
};
|
|
|
|
static struct regulator_ops qcom_labibb_ops = {
|
|
.enable = regulator_enable_regmap,
|
|
.disable = regulator_disable_regmap,
|
|
.is_enabled = regulator_is_enabled_regmap,
|
|
};
|
|
|
|
static struct regulator_desc pmi8998_lab_desc = {
|
|
.enable_mask = LAB_ENABLE_CTL_MASK,
|
|
.enable_reg = (PMI8998_LAB_REG_BASE + REG_LABIBB_ENABLE_CTL),
|
|
.enable_val = LABIBB_CONTROL_ENABLE,
|
|
.enable_time = LAB_ENABLE_TIME,
|
|
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
|
|
.off_on_delay = LABIBB_OFF_ON_DELAY,
|
|
.owner = THIS_MODULE,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &qcom_labibb_ops,
|
|
};
|
|
|
|
static struct regulator_desc pmi8998_ibb_desc = {
|
|
.enable_mask = IBB_ENABLE_CTL_MASK,
|
|
.enable_reg = (PMI8998_IBB_REG_BASE + REG_LABIBB_ENABLE_CTL),
|
|
.enable_val = LABIBB_CONTROL_ENABLE,
|
|
.enable_time = IBB_ENABLE_TIME,
|
|
.poll_enabled_time = LABIBB_POLL_ENABLED_TIME,
|
|
.off_on_delay = LABIBB_OFF_ON_DELAY,
|
|
.owner = THIS_MODULE,
|
|
.type = REGULATOR_VOLTAGE,
|
|
.ops = &qcom_labibb_ops,
|
|
};
|
|
|
|
static const struct labibb_regulator_data pmi8998_labibb_data[] = {
|
|
{"lab", QCOM_LAB_TYPE, PMI8998_LAB_REG_BASE, &pmi8998_lab_desc},
|
|
{"ibb", QCOM_IBB_TYPE, PMI8998_IBB_REG_BASE, &pmi8998_ibb_desc},
|
|
{ },
|
|
};
|
|
|
|
static const struct of_device_id qcom_labibb_match[] = {
|
|
{ .compatible = "qcom,pmi8998-lab-ibb", .data = &pmi8998_labibb_data},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, qcom_labibb_match);
|
|
|
|
static int qcom_labibb_regulator_probe(struct platform_device *pdev)
|
|
{
|
|
struct labibb_regulator *vreg;
|
|
struct device *dev = &pdev->dev;
|
|
struct regulator_config cfg = {};
|
|
|
|
const struct of_device_id *match;
|
|
const struct labibb_regulator_data *reg_data;
|
|
struct regmap *reg_regmap;
|
|
unsigned int type;
|
|
int ret;
|
|
|
|
reg_regmap = dev_get_regmap(pdev->dev.parent, NULL);
|
|
if (!reg_regmap) {
|
|
dev_err(&pdev->dev, "Couldn't get parent's regmap\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
match = of_match_device(qcom_labibb_match, &pdev->dev);
|
|
if (!match)
|
|
return -ENODEV;
|
|
|
|
for (reg_data = match->data; reg_data->name; reg_data++) {
|
|
|
|
/* Validate if the type of regulator is indeed
|
|
* what's mentioned in DT.
|
|
*/
|
|
ret = regmap_read(reg_regmap, reg_data->base + REG_PERPH_TYPE,
|
|
&type);
|
|
if (ret < 0) {
|
|
dev_err(dev,
|
|
"Peripheral type read failed ret=%d\n",
|
|
ret);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (WARN_ON((type != QCOM_LAB_TYPE) && (type != QCOM_IBB_TYPE)) ||
|
|
WARN_ON(type != reg_data->type))
|
|
return -EINVAL;
|
|
|
|
vreg = devm_kzalloc(&pdev->dev, sizeof(*vreg),
|
|
GFP_KERNEL);
|
|
if (!vreg)
|
|
return -ENOMEM;
|
|
|
|
vreg->regmap = reg_regmap;
|
|
vreg->dev = dev;
|
|
vreg->base = reg_data->base;
|
|
vreg->type = reg_data->type;
|
|
|
|
memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
|
|
vreg->desc.of_match = reg_data->name;
|
|
vreg->desc.name = reg_data->name;
|
|
|
|
cfg.dev = vreg->dev;
|
|
cfg.driver_data = vreg;
|
|
cfg.regmap = vreg->regmap;
|
|
|
|
vreg->rdev = devm_regulator_register(vreg->dev, &vreg->desc,
|
|
&cfg);
|
|
|
|
if (IS_ERR(vreg->rdev)) {
|
|
dev_err(dev, "qcom_labibb: error registering %s : %d\n",
|
|
reg_data->name, ret);
|
|
return PTR_ERR(vreg->rdev);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver qcom_labibb_regulator_driver = {
|
|
.driver = {
|
|
.name = "qcom-lab-ibb-regulator",
|
|
.of_match_table = qcom_labibb_match,
|
|
},
|
|
.probe = qcom_labibb_regulator_probe,
|
|
};
|
|
module_platform_driver(qcom_labibb_regulator_driver);
|
|
|
|
MODULE_DESCRIPTION("Qualcomm labibb driver");
|
|
MODULE_AUTHOR("Nisha Kumari <nishakumari@codeaurora.org>");
|
|
MODULE_AUTHOR("Sumit Semwal <sumit.semwal@linaro.org>");
|
|
MODULE_LICENSE("GPL v2");
|