linux/include/asm-i386/mach-numaq/mach_apic.h
Natalie Protasevich ca05fea6db [PATCH] Do not enforce unique IO_APIC_ID check for xAPIC systems (i386)
This patch is per Andi's request to remove NO_IOAPIC_CHECK from genapic and
use heuristics to prevent unique I/O APIC ID check for systems that don't
need it.  The patch disables unique I/O APIC ID check for Xeon-based and
other platforms that don't use serial APIC bus for interrupt delivery.
Andi stated that AMD systems don't need unique IO_APIC_IDs either.

Signed-off-by: Natalie Protasevich <Natalie.Protasevich@unisys.com>
Cc: Andi Kleen <ak@muc.de>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-23 09:45:09 -07:00

150 lines
3.6 KiB
C

#ifndef __ASM_MACH_APIC_H
#define __ASM_MACH_APIC_H
#include <asm/io.h>
#include <linux/mmzone.h>
#include <linux/nodemask.h>
#define APIC_DFR_VALUE (APIC_DFR_CLUSTER)
static inline cpumask_t target_cpus(void)
{
return CPU_MASK_ALL;
}
#define TARGET_CPUS (target_cpus())
#define NO_BALANCE_IRQ (1)
#define esr_disable (1)
#define INT_DELIVERY_MODE dest_LowestPrio
#define INT_DEST_MODE 0 /* physical delivery on LOCAL quad */
#define check_apicid_used(bitmap, apicid) physid_isset(apicid, bitmap)
#define check_apicid_present(bit) physid_isset(bit, phys_cpu_present_map)
#define apicid_cluster(apicid) (apicid & 0xF0)
static inline int apic_id_registered(void)
{
return 1;
}
static inline void init_apic_ldr(void)
{
/* Already done in NUMA-Q firmware */
}
static inline void clustered_apic_check(void)
{
printk("Enabling APIC mode: %s. Using %d I/O APICs\n",
"NUMA-Q", nr_ioapics);
}
/*
* Skip adding the timer int on secondary nodes, which causes
* a small but painful rift in the time-space continuum.
*/
static inline int multi_timer_check(int apic, int irq)
{
return apic != 0 && irq == 0;
}
static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
{
/* We don't have a good way to do this yet - hack */
return physids_promote(0xFUL);
}
/* Mapping from cpu number to logical apicid */
extern u8 cpu_2_logical_apicid[];
static inline int cpu_to_logical_apicid(int cpu)
{
if (cpu >= NR_CPUS)
return BAD_APICID;
return (int)cpu_2_logical_apicid[cpu];
}
/*
* Supporting over 60 cpus on NUMA-Q requires a locality-dependent
* cpu to APIC ID relation to properly interact with the intelligent
* mode of the cluster controller.
*/
static inline int cpu_present_to_apicid(int mps_cpu)
{
if (mps_cpu < 60)
return ((mps_cpu >> 2) << 4) | (1 << (mps_cpu & 0x3));
else
return BAD_APICID;
}
static inline int generate_logical_apicid(int quad, int phys_apicid)
{
return (quad << 4) + (phys_apicid ? phys_apicid << 1 : 1);
}
static inline int apicid_to_node(int logical_apicid)
{
return logical_apicid >> 4;
}
static inline physid_mask_t apicid_to_cpu_present(int logical_apicid)
{
int node = apicid_to_node(logical_apicid);
int cpu = __ffs(logical_apicid & 0xf);
return physid_mask_of_physid(cpu + 4*node);
}
static inline int mpc_apic_id(struct mpc_config_processor *m,
struct mpc_config_translation *translation_record)
{
int quad = translation_record->trans_quad;
int logical_apicid = generate_logical_apicid(quad, m->mpc_apicid);
printk("Processor #%d %ld:%ld APIC version %d (quad %d, apic %d)\n",
m->mpc_apicid,
(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
m->mpc_apicver, quad, logical_apicid);
return logical_apicid;
}
static inline void setup_portio_remap(void)
{
int num_quads = num_online_nodes();
if (num_quads <= 1)
return;
printk("Remapping cross-quad port I/O for %d quads\n", num_quads);
xquad_portio = ioremap(XQUAD_PORTIO_BASE, num_quads*XQUAD_PORTIO_QUAD);
printk("xquad_portio vaddr 0x%08lx, len %08lx\n",
(u_long) xquad_portio, (u_long) num_quads*XQUAD_PORTIO_QUAD);
}
static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
{
return (1);
}
static inline void enable_apic_mode(void)
{
}
/*
* We use physical apicids here, not logical, so just return the default
* physical broadcast to stop people from breaking us
*/
static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
{
return (int) 0xF;
}
/* No NUMA-Q box has a HT CPU, but it can't hurt to use the default code. */
static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
{
return cpuid_apic >> index_msb;
}
#endif /* __ASM_MACH_APIC_H */