mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
1920906f59
Add F81866 GPIO supports Fintek F81866 is a SuperIO. It contains HWMON/GPIO/Serial Ports. and it has totally 72(9x8 sets) gpio pins. Here is the PDF spec: http://www.alldatasheet.com/datasheet-pdf/pdf/459085/FINTEK/F81866AD-I.html The control method is the same with F7188x, but we should care the address of GPIO8x. GPIO address is below: GPIO0x based: 0xf0 GPIO1x based: 0xe0 GPIO2x based: 0xd0 GPIO3x based: 0xc0 GPIO4x based: 0xb0 GPIO5x based: 0xa0 GPIO6x based: 0x90 GPIO7x based: 0x80 GPIO8x based: 0x88 <-- not 0x70. Signed-off-by: Peter Hung <hpeter+linux_kernel@gmail.com> Acked-by: Simon Guinot <simon.guinot@sequanux.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
512 lines
12 KiB
C
512 lines
12 KiB
C
/*
|
|
* GPIO driver for Fintek Super-I/O F71869, F71869A, F71882, F71889 and F81866
|
|
*
|
|
* Copyright (C) 2010-2013 LaCie
|
|
*
|
|
* Author: Simon Guinot <simon.guinot@sequanux.org>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/io.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#define DRVNAME "gpio-f7188x"
|
|
|
|
/*
|
|
* Super-I/O registers
|
|
*/
|
|
#define SIO_LDSEL 0x07 /* Logical device select */
|
|
#define SIO_DEVID 0x20 /* Device ID (2 bytes) */
|
|
#define SIO_DEVREV 0x22 /* Device revision */
|
|
#define SIO_MANID 0x23 /* Fintek ID (2 bytes) */
|
|
|
|
#define SIO_LD_GPIO 0x06 /* GPIO logical device */
|
|
#define SIO_UNLOCK_KEY 0x87 /* Key to enable Super-I/O */
|
|
#define SIO_LOCK_KEY 0xAA /* Key to disable Super-I/O */
|
|
|
|
#define SIO_FINTEK_ID 0x1934 /* Manufacturer ID */
|
|
#define SIO_F71869_ID 0x0814 /* F71869 chipset ID */
|
|
#define SIO_F71869A_ID 0x1007 /* F71869A chipset ID */
|
|
#define SIO_F71882_ID 0x0541 /* F71882 chipset ID */
|
|
#define SIO_F71889_ID 0x0909 /* F71889 chipset ID */
|
|
#define SIO_F81866_ID 0x1010 /* F81866 chipset ID */
|
|
|
|
enum chips { f71869, f71869a, f71882fg, f71889f, f81866 };
|
|
|
|
static const char * const f7188x_names[] = {
|
|
"f71869",
|
|
"f71869a",
|
|
"f71882fg",
|
|
"f71889f",
|
|
"f81866",
|
|
};
|
|
|
|
struct f7188x_sio {
|
|
int addr;
|
|
enum chips type;
|
|
};
|
|
|
|
struct f7188x_gpio_bank {
|
|
struct gpio_chip chip;
|
|
unsigned int regbase;
|
|
struct f7188x_gpio_data *data;
|
|
};
|
|
|
|
struct f7188x_gpio_data {
|
|
struct f7188x_sio *sio;
|
|
int nr_bank;
|
|
struct f7188x_gpio_bank *bank;
|
|
};
|
|
|
|
/*
|
|
* Super-I/O functions.
|
|
*/
|
|
|
|
static inline int superio_inb(int base, int reg)
|
|
{
|
|
outb(reg, base);
|
|
return inb(base + 1);
|
|
}
|
|
|
|
static int superio_inw(int base, int reg)
|
|
{
|
|
int val;
|
|
|
|
outb(reg++, base);
|
|
val = inb(base + 1) << 8;
|
|
outb(reg, base);
|
|
val |= inb(base + 1);
|
|
|
|
return val;
|
|
}
|
|
|
|
static inline void superio_outb(int base, int reg, int val)
|
|
{
|
|
outb(reg, base);
|
|
outb(val, base + 1);
|
|
}
|
|
|
|
static inline int superio_enter(int base)
|
|
{
|
|
/* Don't step on other drivers' I/O space by accident. */
|
|
if (!request_muxed_region(base, 2, DRVNAME)) {
|
|
pr_err(DRVNAME "I/O address 0x%04x already in use\n", base);
|
|
return -EBUSY;
|
|
}
|
|
|
|
/* According to the datasheet the key must be send twice. */
|
|
outb(SIO_UNLOCK_KEY, base);
|
|
outb(SIO_UNLOCK_KEY, base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static inline void superio_select(int base, int ld)
|
|
{
|
|
outb(SIO_LDSEL, base);
|
|
outb(ld, base + 1);
|
|
}
|
|
|
|
static inline void superio_exit(int base)
|
|
{
|
|
outb(SIO_LOCK_KEY, base);
|
|
release_region(base, 2);
|
|
}
|
|
|
|
/*
|
|
* GPIO chip.
|
|
*/
|
|
|
|
static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset);
|
|
static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset);
|
|
static int f7188x_gpio_direction_out(struct gpio_chip *chip,
|
|
unsigned offset, int value);
|
|
static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value);
|
|
|
|
#define F7188X_GPIO_BANK(_base, _ngpio, _regbase) \
|
|
{ \
|
|
.chip = { \
|
|
.label = DRVNAME, \
|
|
.owner = THIS_MODULE, \
|
|
.direction_input = f7188x_gpio_direction_in, \
|
|
.get = f7188x_gpio_get, \
|
|
.direction_output = f7188x_gpio_direction_out, \
|
|
.set = f7188x_gpio_set, \
|
|
.base = _base, \
|
|
.ngpio = _ngpio, \
|
|
.can_sleep = true, \
|
|
}, \
|
|
.regbase = _regbase, \
|
|
}
|
|
|
|
#define gpio_dir(base) (base + 0)
|
|
#define gpio_data_out(base) (base + 1)
|
|
#define gpio_data_in(base) (base + 2)
|
|
/* Output mode register (0:open drain 1:push-pull). */
|
|
#define gpio_out_mode(base) (base + 3)
|
|
|
|
static struct f7188x_gpio_bank f71869_gpio_bank[] = {
|
|
F7188X_GPIO_BANK(0, 6, 0xF0),
|
|
F7188X_GPIO_BANK(10, 8, 0xE0),
|
|
F7188X_GPIO_BANK(20, 8, 0xD0),
|
|
F7188X_GPIO_BANK(30, 8, 0xC0),
|
|
F7188X_GPIO_BANK(40, 8, 0xB0),
|
|
F7188X_GPIO_BANK(50, 5, 0xA0),
|
|
F7188X_GPIO_BANK(60, 6, 0x90),
|
|
};
|
|
|
|
static struct f7188x_gpio_bank f71869a_gpio_bank[] = {
|
|
F7188X_GPIO_BANK(0, 6, 0xF0),
|
|
F7188X_GPIO_BANK(10, 8, 0xE0),
|
|
F7188X_GPIO_BANK(20, 8, 0xD0),
|
|
F7188X_GPIO_BANK(30, 8, 0xC0),
|
|
F7188X_GPIO_BANK(40, 8, 0xB0),
|
|
F7188X_GPIO_BANK(50, 5, 0xA0),
|
|
F7188X_GPIO_BANK(60, 8, 0x90),
|
|
F7188X_GPIO_BANK(70, 8, 0x80),
|
|
};
|
|
|
|
static struct f7188x_gpio_bank f71882_gpio_bank[] = {
|
|
F7188X_GPIO_BANK(0, 8, 0xF0),
|
|
F7188X_GPIO_BANK(10, 8, 0xE0),
|
|
F7188X_GPIO_BANK(20, 8, 0xD0),
|
|
F7188X_GPIO_BANK(30, 4, 0xC0),
|
|
F7188X_GPIO_BANK(40, 4, 0xB0),
|
|
};
|
|
|
|
static struct f7188x_gpio_bank f71889_gpio_bank[] = {
|
|
F7188X_GPIO_BANK(0, 7, 0xF0),
|
|
F7188X_GPIO_BANK(10, 7, 0xE0),
|
|
F7188X_GPIO_BANK(20, 8, 0xD0),
|
|
F7188X_GPIO_BANK(30, 8, 0xC0),
|
|
F7188X_GPIO_BANK(40, 8, 0xB0),
|
|
F7188X_GPIO_BANK(50, 5, 0xA0),
|
|
F7188X_GPIO_BANK(60, 8, 0x90),
|
|
F7188X_GPIO_BANK(70, 8, 0x80),
|
|
};
|
|
|
|
static struct f7188x_gpio_bank f81866_gpio_bank[] = {
|
|
F7188X_GPIO_BANK(0, 8, 0xF0),
|
|
F7188X_GPIO_BANK(10, 8, 0xE0),
|
|
F7188X_GPIO_BANK(20, 8, 0xD0),
|
|
F7188X_GPIO_BANK(30, 8, 0xC0),
|
|
F7188X_GPIO_BANK(40, 8, 0xB0),
|
|
F7188X_GPIO_BANK(50, 8, 0xA0),
|
|
F7188X_GPIO_BANK(60, 8, 0x90),
|
|
F7188X_GPIO_BANK(70, 8, 0x80),
|
|
F7188X_GPIO_BANK(80, 8, 0x88),
|
|
};
|
|
|
|
static int f7188x_gpio_direction_in(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
int err;
|
|
struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
|
|
struct f7188x_sio *sio = bank->data->sio;
|
|
u8 dir;
|
|
|
|
err = superio_enter(sio->addr);
|
|
if (err)
|
|
return err;
|
|
superio_select(sio->addr, SIO_LD_GPIO);
|
|
|
|
dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
|
|
dir &= ~(1 << offset);
|
|
superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
|
|
|
|
superio_exit(sio->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int f7188x_gpio_get(struct gpio_chip *chip, unsigned offset)
|
|
{
|
|
int err;
|
|
struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
|
|
struct f7188x_sio *sio = bank->data->sio;
|
|
u8 dir, data;
|
|
|
|
err = superio_enter(sio->addr);
|
|
if (err)
|
|
return err;
|
|
superio_select(sio->addr, SIO_LD_GPIO);
|
|
|
|
dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
|
|
dir = !!(dir & (1 << offset));
|
|
if (dir)
|
|
data = superio_inb(sio->addr, gpio_data_out(bank->regbase));
|
|
else
|
|
data = superio_inb(sio->addr, gpio_data_in(bank->regbase));
|
|
|
|
superio_exit(sio->addr);
|
|
|
|
return !!(data & 1 << offset);
|
|
}
|
|
|
|
static int f7188x_gpio_direction_out(struct gpio_chip *chip,
|
|
unsigned offset, int value)
|
|
{
|
|
int err;
|
|
struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
|
|
struct f7188x_sio *sio = bank->data->sio;
|
|
u8 dir, data_out;
|
|
|
|
err = superio_enter(sio->addr);
|
|
if (err)
|
|
return err;
|
|
superio_select(sio->addr, SIO_LD_GPIO);
|
|
|
|
data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
|
|
if (value)
|
|
data_out |= (1 << offset);
|
|
else
|
|
data_out &= ~(1 << offset);
|
|
superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
|
|
|
|
dir = superio_inb(sio->addr, gpio_dir(bank->regbase));
|
|
dir |= (1 << offset);
|
|
superio_outb(sio->addr, gpio_dir(bank->regbase), dir);
|
|
|
|
superio_exit(sio->addr);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void f7188x_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
|
|
{
|
|
int err;
|
|
struct f7188x_gpio_bank *bank = gpiochip_get_data(chip);
|
|
struct f7188x_sio *sio = bank->data->sio;
|
|
u8 data_out;
|
|
|
|
err = superio_enter(sio->addr);
|
|
if (err)
|
|
return;
|
|
superio_select(sio->addr, SIO_LD_GPIO);
|
|
|
|
data_out = superio_inb(sio->addr, gpio_data_out(bank->regbase));
|
|
if (value)
|
|
data_out |= (1 << offset);
|
|
else
|
|
data_out &= ~(1 << offset);
|
|
superio_outb(sio->addr, gpio_data_out(bank->regbase), data_out);
|
|
|
|
superio_exit(sio->addr);
|
|
}
|
|
|
|
/*
|
|
* Platform device and driver.
|
|
*/
|
|
|
|
static int f7188x_gpio_probe(struct platform_device *pdev)
|
|
{
|
|
int err;
|
|
int i;
|
|
struct f7188x_sio *sio = dev_get_platdata(&pdev->dev);
|
|
struct f7188x_gpio_data *data;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(*data), GFP_KERNEL);
|
|
if (!data)
|
|
return -ENOMEM;
|
|
|
|
switch (sio->type) {
|
|
case f71869:
|
|
data->nr_bank = ARRAY_SIZE(f71869_gpio_bank);
|
|
data->bank = f71869_gpio_bank;
|
|
break;
|
|
case f71869a:
|
|
data->nr_bank = ARRAY_SIZE(f71869a_gpio_bank);
|
|
data->bank = f71869a_gpio_bank;
|
|
break;
|
|
case f71882fg:
|
|
data->nr_bank = ARRAY_SIZE(f71882_gpio_bank);
|
|
data->bank = f71882_gpio_bank;
|
|
break;
|
|
case f71889f:
|
|
data->nr_bank = ARRAY_SIZE(f71889_gpio_bank);
|
|
data->bank = f71889_gpio_bank;
|
|
break;
|
|
case f81866:
|
|
data->nr_bank = ARRAY_SIZE(f81866_gpio_bank);
|
|
data->bank = f81866_gpio_bank;
|
|
break;
|
|
default:
|
|
return -ENODEV;
|
|
}
|
|
data->sio = sio;
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
/* For each GPIO bank, register a GPIO chip. */
|
|
for (i = 0; i < data->nr_bank; i++) {
|
|
struct f7188x_gpio_bank *bank = &data->bank[i];
|
|
|
|
bank->chip.parent = &pdev->dev;
|
|
bank->data = data;
|
|
|
|
err = gpiochip_add_data(&bank->chip, bank);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Failed to register gpiochip %d: %d\n",
|
|
i, err);
|
|
goto err_gpiochip;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_gpiochip:
|
|
for (i = i - 1; i >= 0; i--) {
|
|
struct f7188x_gpio_bank *bank = &data->bank[i];
|
|
gpiochip_remove(&bank->chip);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int f7188x_gpio_remove(struct platform_device *pdev)
|
|
{
|
|
int i;
|
|
struct f7188x_gpio_data *data = platform_get_drvdata(pdev);
|
|
|
|
for (i = 0; i < data->nr_bank; i++) {
|
|
struct f7188x_gpio_bank *bank = &data->bank[i];
|
|
gpiochip_remove(&bank->chip);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init f7188x_find(int addr, struct f7188x_sio *sio)
|
|
{
|
|
int err;
|
|
u16 devid;
|
|
|
|
err = superio_enter(addr);
|
|
if (err)
|
|
return err;
|
|
|
|
err = -ENODEV;
|
|
devid = superio_inw(addr, SIO_MANID);
|
|
if (devid != SIO_FINTEK_ID) {
|
|
pr_debug(DRVNAME ": Not a Fintek device at 0x%08x\n", addr);
|
|
goto err;
|
|
}
|
|
|
|
devid = superio_inw(addr, SIO_DEVID);
|
|
switch (devid) {
|
|
case SIO_F71869_ID:
|
|
sio->type = f71869;
|
|
break;
|
|
case SIO_F71869A_ID:
|
|
sio->type = f71869a;
|
|
break;
|
|
case SIO_F71882_ID:
|
|
sio->type = f71882fg;
|
|
break;
|
|
case SIO_F71889_ID:
|
|
sio->type = f71889f;
|
|
break;
|
|
case SIO_F81866_ID:
|
|
sio->type = f81866;
|
|
break;
|
|
default:
|
|
pr_info(DRVNAME ": Unsupported Fintek device 0x%04x\n", devid);
|
|
goto err;
|
|
}
|
|
sio->addr = addr;
|
|
err = 0;
|
|
|
|
pr_info(DRVNAME ": Found %s at %#x, revision %d\n",
|
|
f7188x_names[sio->type],
|
|
(unsigned int) addr,
|
|
(int) superio_inb(addr, SIO_DEVREV));
|
|
|
|
err:
|
|
superio_exit(addr);
|
|
return err;
|
|
}
|
|
|
|
static struct platform_device *f7188x_gpio_pdev;
|
|
|
|
static int __init
|
|
f7188x_gpio_device_add(const struct f7188x_sio *sio)
|
|
{
|
|
int err;
|
|
|
|
f7188x_gpio_pdev = platform_device_alloc(DRVNAME, -1);
|
|
if (!f7188x_gpio_pdev)
|
|
return -ENOMEM;
|
|
|
|
err = platform_device_add_data(f7188x_gpio_pdev,
|
|
sio, sizeof(*sio));
|
|
if (err) {
|
|
pr_err(DRVNAME "Platform data allocation failed\n");
|
|
goto err;
|
|
}
|
|
|
|
err = platform_device_add(f7188x_gpio_pdev);
|
|
if (err) {
|
|
pr_err(DRVNAME "Device addition failed\n");
|
|
goto err;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err:
|
|
platform_device_put(f7188x_gpio_pdev);
|
|
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Try to match a supported Fintek device by reading the (hard-wired)
|
|
* configuration I/O ports. If available, then register both the platform
|
|
* device and driver to support the GPIOs.
|
|
*/
|
|
|
|
static struct platform_driver f7188x_gpio_driver = {
|
|
.driver = {
|
|
.name = DRVNAME,
|
|
},
|
|
.probe = f7188x_gpio_probe,
|
|
.remove = f7188x_gpio_remove,
|
|
};
|
|
|
|
static int __init f7188x_gpio_init(void)
|
|
{
|
|
int err;
|
|
struct f7188x_sio sio;
|
|
|
|
if (f7188x_find(0x2e, &sio) &&
|
|
f7188x_find(0x4e, &sio))
|
|
return -ENODEV;
|
|
|
|
err = platform_driver_register(&f7188x_gpio_driver);
|
|
if (!err) {
|
|
err = f7188x_gpio_device_add(&sio);
|
|
if (err)
|
|
platform_driver_unregister(&f7188x_gpio_driver);
|
|
}
|
|
|
|
return err;
|
|
}
|
|
subsys_initcall(f7188x_gpio_init);
|
|
|
|
static void __exit f7188x_gpio_exit(void)
|
|
{
|
|
platform_device_unregister(f7188x_gpio_pdev);
|
|
platform_driver_unregister(&f7188x_gpio_driver);
|
|
}
|
|
module_exit(f7188x_gpio_exit);
|
|
|
|
MODULE_DESCRIPTION("GPIO driver for Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866");
|
|
MODULE_AUTHOR("Simon Guinot <simon.guinot@sequanux.org>");
|
|
MODULE_LICENSE("GPL");
|