Minki/linux
1
0
Fork 1
mirror of https://github.com/torvalds/linux.git synced 2024-11-15 16:41:58 +00:00
Code Issues Packages Projects Releases Wiki Activity
4c8b581dd2
linux/arch/arm/mach-davinci/dm355.c
Muralidharan Karicheri 51e68e27d3 davinci: DM355 - platform changes for vpfe capture 
DM355 platform and board setup

This has platform and board setup changes to support vpfe capture
driver for DM355 EVMs.

Tested video capture on DM355 using tvp514x

Reviewed-by: Hans Verkuil <hverkuil@xs4all.nl>
Reviewed-by: Laurent Pinchart <laurent.pinchart@skynet.be>
Reviewed-by: David Brownell <david-b@pacbell.net>
Signed-off-by: Muralidharan Karicheri <m-karicheri2@ti.com>
Signed-off-by: Denys Dmytriyenko <denis@denix.org>
Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com>
2009-09-16 10:25:45 -07:00

881 lines
21 KiB
C
Raw Blame History

/*
* TI DaVinci DM355 chip specific setup
*
* Author: Kevin Hilman, Deep Root Systems, LLC
*
* 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/clk.h>
#include <linux/serial_8250.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/gpio.h>
#include <linux/spi/spi.h>
#include <asm/mach/map.h>
#include <mach/dm355.h>
#include <mach/clock.h>
#include <mach/cputype.h>
#include <mach/edma.h>
#include <mach/psc.h>
#include <mach/mux.h>
#include <mach/irqs.h>
#include <mach/time.h>
#include <mach/serial.h>
#include <mach/common.h>
#include <mach/asp.h>
#include "clock.h"
#include "mux.h"
#define DM355_UART2_BASE (IO_PHYS + 0x206000)
/*
* Device specific clocks
*/
#define DM355_REF_FREQ 24000000 /* 24 or 36 MHz */
static struct pll_data pll1_data = {
.num = 1,
.phys_base = DAVINCI_PLL1_BASE,
.flags = PLL_HAS_PREDIV | PLL_HAS_POSTDIV,
};
static struct pll_data pll2_data = {
.num = 2,
.phys_base = DAVINCI_PLL2_BASE,
.flags = PLL_HAS_PREDIV,
};
static struct clk ref_clk = {
.name = "ref_clk",
/* FIXME -- crystal rate is board-specific */
.rate = DM355_REF_FREQ,
};
static struct clk pll1_clk = {
.name = "pll1",
.parent = &ref_clk,
.flags = CLK_PLL,
.pll_data = &pll1_data,
};
static struct clk pll1_aux_clk = {
.name = "pll1_aux_clk",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
};
static struct clk pll1_sysclk1 = {
.name = "pll1_sysclk1",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll1_sysclk2 = {
.name = "pll1_sysclk2",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV2,
};
static struct clk pll1_sysclk3 = {
.name = "pll1_sysclk3",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV3,
};
static struct clk pll1_sysclk4 = {
.name = "pll1_sysclk4",
.parent = &pll1_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV4,
};
static struct clk pll1_sysclkbp = {
.name = "pll1_sysclkbp",
.parent = &pll1_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk vpss_dac_clk = {
.name = "vpss_dac",
.parent = &pll1_sysclk3,
.lpsc = DM355_LPSC_VPSS_DAC,
};
static struct clk vpss_master_clk = {
.name = "vpss_master",
.parent = &pll1_sysclk4,
.lpsc = DAVINCI_LPSC_VPSSMSTR,
.flags = CLK_PSC,
};
static struct clk vpss_slave_clk = {
.name = "vpss_slave",
.parent = &pll1_sysclk4,
.lpsc = DAVINCI_LPSC_VPSSSLV,
};
static struct clk clkout1_clk = {
.name = "clkout1",
.parent = &pll1_aux_clk,
/* NOTE: clkout1 can be externally gated by muxing GPIO-18 */
};
static struct clk clkout2_clk = {
.name = "clkout2",
.parent = &pll1_sysclkbp,
};
static struct clk pll2_clk = {
.name = "pll2",
.parent = &ref_clk,
.flags = CLK_PLL,
.pll_data = &pll2_data,
};
static struct clk pll2_sysclk1 = {
.name = "pll2_sysclk1",
.parent = &pll2_clk,
.flags = CLK_PLL,
.div_reg = PLLDIV1,
};
static struct clk pll2_sysclkbp = {
.name = "pll2_sysclkbp",
.parent = &pll2_clk,
.flags = CLK_PLL | PRE_PLL,
.div_reg = BPDIV
};
static struct clk clkout3_clk = {
.name = "clkout3",
.parent = &pll2_sysclkbp,
/* NOTE: clkout3 can be externally gated by muxing GPIO-16 */
};
static struct clk arm_clk = {
.name = "arm_clk",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_ARM,
.flags = ALWAYS_ENABLED,
};
/*
* NOT LISTED below, and not touched by Linux
* - in SyncReset state by default
* .lpsc = DAVINCI_LPSC_TPCC,
* .lpsc = DAVINCI_LPSC_TPTC0,
* .lpsc = DAVINCI_LPSC_TPTC1,
* .lpsc = DAVINCI_LPSC_DDR_EMIF, .parent = &sysclk2_clk,
* .lpsc = DAVINCI_LPSC_MEMSTICK,
* - in Enabled state by default
* .lpsc = DAVINCI_LPSC_SYSTEM_SUBSYS,
* .lpsc = DAVINCI_LPSC_SCR2, // "bus"
* .lpsc = DAVINCI_LPSC_SCR3, // "bus"
* .lpsc = DAVINCI_LPSC_SCR4, // "bus"
* .lpsc = DAVINCI_LPSC_CROSSBAR, // "emulation"
* .lpsc = DAVINCI_LPSC_CFG27, // "test"
* .lpsc = DAVINCI_LPSC_CFG3, // "test"
* .lpsc = DAVINCI_LPSC_CFG5, // "test"
*/
static struct clk mjcp_clk = {
.name = "mjcp",
.parent = &pll1_sysclk1,
.lpsc = DAVINCI_LPSC_IMCOP,
};
static struct clk uart0_clk = {
.name = "uart0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART0,
};
static struct clk uart1_clk = {
.name = "uart1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_UART1,
};
static struct clk uart2_clk = {
.name = "uart2",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_UART2,
};
static struct clk i2c_clk = {
.name = "i2c",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_I2C,
};
static struct clk asp0_clk = {
.name = "asp0",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_McBSP,
};
static struct clk asp1_clk = {
.name = "asp1",
.parent = &pll1_sysclk2,
.lpsc = DM355_LPSC_McBSP1,
};
static struct clk mmcsd0_clk = {
.name = "mmcsd0",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_MMC_SD,
};
static struct clk mmcsd1_clk = {
.name = "mmcsd1",
.parent = &pll1_sysclk2,
.lpsc = DM355_LPSC_MMC_SD1,
};
static struct clk spi0_clk = {
.name = "spi0",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_SPI,
};
static struct clk spi1_clk = {
.name = "spi1",
.parent = &pll1_sysclk2,
.lpsc = DM355_LPSC_SPI1,
};
static struct clk spi2_clk = {
.name = "spi2",
.parent = &pll1_sysclk2,
.lpsc = DM355_LPSC_SPI2,
};
static struct clk gpio_clk = {
.name = "gpio",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_GPIO,
};
static struct clk aemif_clk = {
.name = "aemif",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_AEMIF,
};
static struct clk pwm0_clk = {
.name = "pwm0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM0,
};
static struct clk pwm1_clk = {
.name = "pwm1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM1,
};
static struct clk pwm2_clk = {
.name = "pwm2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_PWM2,
};
static struct clk pwm3_clk = {
.name = "pwm3",
.parent = &pll1_aux_clk,
.lpsc = DM355_LPSC_PWM3,
};
static struct clk timer0_clk = {
.name = "timer0",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER0,
};
static struct clk timer1_clk = {
.name = "timer1",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER1,
};
static struct clk timer2_clk = {
.name = "timer2",
.parent = &pll1_aux_clk,
.lpsc = DAVINCI_LPSC_TIMER2,
.usecount = 1, /* REVISIT: why cant' this be disabled? */
};
static struct clk timer3_clk = {
.name = "timer3",
.parent = &pll1_aux_clk,
.lpsc = DM355_LPSC_TIMER3,
};
static struct clk rto_clk = {
.name = "rto",
.parent = &pll1_aux_clk,
.lpsc = DM355_LPSC_RTO,
};
static struct clk usb_clk = {
.name = "usb",
.parent = &pll1_sysclk2,
.lpsc = DAVINCI_LPSC_USB,
};
static struct davinci_clk dm355_clks[] = {
CLK(NULL, "ref", &ref_clk),
CLK(NULL, "pll1", &pll1_clk),
CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
CLK(NULL, "pll1_sysclk4", &pll1_sysclk4),
CLK(NULL, "pll1_aux", &pll1_aux_clk),
CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
CLK(NULL, "vpss_dac", &vpss_dac_clk),
CLK(NULL, "vpss_master", &vpss_master_clk),
CLK(NULL, "vpss_slave", &vpss_slave_clk),
CLK(NULL, "clkout1", &clkout1_clk),
CLK(NULL, "clkout2", &clkout2_clk),
CLK(NULL, "pll2", &pll2_clk),
CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
CLK(NULL, "clkout3", &clkout3_clk),
CLK(NULL, "arm", &arm_clk),
CLK(NULL, "mjcp", &mjcp_clk),
CLK(NULL, "uart0", &uart0_clk),
CLK(NULL, "uart1", &uart1_clk),
CLK(NULL, "uart2", &uart2_clk),
CLK("i2c_davinci.1", NULL, &i2c_clk),
CLK("davinci-asp.0", NULL, &asp0_clk),
CLK("davinci-asp.1", NULL, &asp1_clk),
CLK("davinci_mmc.0", NULL, &mmcsd0_clk),
CLK("davinci_mmc.1", NULL, &mmcsd1_clk),
CLK(NULL, "spi0", &spi0_clk),
CLK(NULL, "spi1", &spi1_clk),
CLK(NULL, "spi2", &spi2_clk),
CLK(NULL, "gpio", &gpio_clk),
CLK(NULL, "aemif", &aemif_clk),
CLK(NULL, "pwm0", &pwm0_clk),
CLK(NULL, "pwm1", &pwm1_clk),
CLK(NULL, "pwm2", &pwm2_clk),
CLK(NULL, "pwm3", &pwm3_clk),
CLK(NULL, "timer0", &timer0_clk),
CLK(NULL, "timer1", &timer1_clk),
CLK("watchdog", NULL, &timer2_clk),
CLK(NULL, "timer3", &timer3_clk),
CLK(NULL, "rto", &rto_clk),
CLK(NULL, "usb", &usb_clk),
CLK(NULL, NULL, NULL),
};
/*----------------------------------------------------------------------*/
static u64 dm355_spi0_dma_mask = DMA_BIT_MASK(32);
static struct resource dm355_spi0_resources[] = {
{
.start = 0x01c66000,
.end = 0x01c667ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_DM355_SPINT0_1,
.flags = IORESOURCE_IRQ,
},
/* Not yet used, so not included:
* IORESOURCE_IRQ:
* - IRQ_DM355_SPINT0_0
* IORESOURCE_DMA:
* - DAVINCI_DMA_SPI_SPIX
* - DAVINCI_DMA_SPI_SPIR
*/
};
static struct platform_device dm355_spi0_device = {
.name = "spi_davinci",
.id = 0,
.dev = {
.dma_mask = &dm355_spi0_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(dm355_spi0_resources),
.resource = dm355_spi0_resources,
};
void __init dm355_init_spi0(unsigned chipselect_mask,
struct spi_board_info *info, unsigned len)
{
/* for now, assume we need MISO */
davinci_cfg_reg(DM355_SPI0_SDI);
/* not all slaves will be wired up */
if (chipselect_mask & BIT(0))
davinci_cfg_reg(DM355_SPI0_SDENA0);
if (chipselect_mask & BIT(1))
davinci_cfg_reg(DM355_SPI0_SDENA1);
spi_register_board_info(info, len);
platform_device_register(&dm355_spi0_device);
}
/*----------------------------------------------------------------------*/
#define PINMUX0 0x00
#define PINMUX1 0x04
#define PINMUX2 0x08
#define PINMUX3 0x0c
#define PINMUX4 0x10
#define INTMUX 0x18
#define EVTMUX 0x1c
/*
* Device specific mux setup
*
* soc description mux mode mode mux dbg
* reg offset mask mode
*/
static const struct mux_config dm355_pins[] = {
#ifdef CONFIG_DAVINCI_MUX
MUX_CFG(DM355, MMCSD0, 4, 2, 1, 0, false)
MUX_CFG(DM355, SD1_CLK, 3, 6, 1, 1, false)
MUX_CFG(DM355, SD1_CMD, 3, 7, 1, 1, false)
MUX_CFG(DM355, SD1_DATA3, 3, 8, 3, 1, false)
MUX_CFG(DM355, SD1_DATA2, 3, 10, 3, 1, false)
MUX_CFG(DM355, SD1_DATA1, 3, 12, 3, 1, false)
MUX_CFG(DM355, SD1_DATA0, 3, 14, 3, 1, false)
MUX_CFG(DM355, I2C_SDA, 3, 19, 1, 1, false)
MUX_CFG(DM355, I2C_SCL, 3, 20, 1, 1, false)
MUX_CFG(DM355, MCBSP0_BDX, 3, 0, 1, 1, false)
MUX_CFG(DM355, MCBSP0_X, 3, 1, 1, 1, false)
MUX_CFG(DM355, MCBSP0_BFSX, 3, 2, 1, 1, false)
MUX_CFG(DM355, MCBSP0_BDR, 3, 3, 1, 1, false)
MUX_CFG(DM355, MCBSP0_R, 3, 4, 1, 1, false)
MUX_CFG(DM355, MCBSP0_BFSR, 3, 5, 1, 1, false)
MUX_CFG(DM355, SPI0_SDI, 4, 1, 1, 0, false)
MUX_CFG(DM355, SPI0_SDENA0, 4, 0, 1, 0, false)
MUX_CFG(DM355, SPI0_SDENA1, 3, 28, 1, 1, false)
INT_CFG(DM355, INT_EDMA_CC, 2, 1, 1, false)
INT_CFG(DM355, INT_EDMA_TC0_ERR, 3, 1, 1, false)
INT_CFG(DM355, INT_EDMA_TC1_ERR, 4, 1, 1, false)
EVT_CFG(DM355, EVT8_ASP1_TX, 0, 1, 0, false)
EVT_CFG(DM355, EVT9_ASP1_RX, 1, 1, 0, false)
EVT_CFG(DM355, EVT26_MMC0_RX, 2, 1, 0, false)
MUX_CFG(DM355, VOUT_FIELD, 1, 18, 3, 1, false)
MUX_CFG(DM355, VOUT_FIELD_G70, 1, 18, 3, 0, false)
MUX_CFG(DM355, VOUT_HVSYNC, 1, 16, 1, 0, false)
MUX_CFG(DM355, VOUT_COUTL_EN, 1, 0, 0xff, 0x55, false)
MUX_CFG(DM355, VOUT_COUTH_EN, 1, 8, 0xff, 0x55, false)
MUX_CFG(DM355, VIN_PCLK, 0, 14, 1, 1, false)
MUX_CFG(DM355, VIN_CAM_WEN, 0, 13, 1, 1, false)
MUX_CFG(DM355, VIN_CAM_VD, 0, 12, 1, 1, false)
MUX_CFG(DM355, VIN_CAM_HD, 0, 11, 1, 1, false)
MUX_CFG(DM355, VIN_YIN_EN, 0, 10, 1, 1, false)
MUX_CFG(DM355, VIN_CINL_EN, 0, 0, 0xff, 0x55, false)
MUX_CFG(DM355, VIN_CINH_EN, 0, 8, 3, 3, false)
#endif
};
static u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
[IRQ_DM355_CCDC_VDINT0] = 2,
[IRQ_DM355_CCDC_VDINT1] = 6,
[IRQ_DM355_CCDC_VDINT2] = 6,
[IRQ_DM355_IPIPE_HST] = 6,
[IRQ_DM355_H3AINT] = 6,
[IRQ_DM355_IPIPE_SDR] = 6,
[IRQ_DM355_IPIPEIFINT] = 6,
[IRQ_DM355_OSDINT] = 7,
[IRQ_DM355_VENCINT] = 6,
[IRQ_ASQINT] = 6,
[IRQ_IMXINT] = 6,
[IRQ_USBINT] = 4,
[IRQ_DM355_RTOINT] = 4,
[IRQ_DM355_UARTINT2] = 7,
[IRQ_DM355_TINT6] = 7,
[IRQ_CCINT0] = 5, /* dma */
[IRQ_CCERRINT] = 5, /* dma */
[IRQ_TCERRINT0] = 5, /* dma */
[IRQ_TCERRINT] = 5, /* dma */
[IRQ_DM355_SPINT2_1] = 7,
[IRQ_DM355_TINT7] = 4,
[IRQ_DM355_SDIOINT0] = 7,
[IRQ_MBXINT] = 7,
[IRQ_MBRINT] = 7,
[IRQ_MMCINT] = 7,
[IRQ_DM355_MMCINT1] = 7,
[IRQ_DM355_PWMINT3] = 7,
[IRQ_DDRINT] = 7,
[IRQ_AEMIFINT] = 7,
[IRQ_DM355_SDIOINT1] = 4,
[IRQ_TINT0_TINT12] = 2, /* clockevent */
[IRQ_TINT0_TINT34] = 2, /* clocksource */
[IRQ_TINT1_TINT12] = 7, /* DSP timer */
[IRQ_TINT1_TINT34] = 7, /* system tick */
[IRQ_PWMINT0] = 7,
[IRQ_PWMINT1] = 7,
[IRQ_PWMINT2] = 7,
[IRQ_I2C] = 3,
[IRQ_UARTINT0] = 3,
[IRQ_UARTINT1] = 3,
[IRQ_DM355_SPINT0_0] = 3,
[IRQ_DM355_SPINT0_1] = 3,
[IRQ_DM355_GPIO0] = 3,
[IRQ_DM355_GPIO1] = 7,
[IRQ_DM355_GPIO2] = 4,
[IRQ_DM355_GPIO3] = 4,
[IRQ_DM355_GPIO4] = 7,
[IRQ_DM355_GPIO5] = 7,
[IRQ_DM355_GPIO6] = 7,
[IRQ_DM355_GPIO7] = 7,
[IRQ_DM355_GPIO8] = 7,
[IRQ_DM355_GPIO9] = 7,
[IRQ_DM355_GPIOBNK0] = 7,
[IRQ_DM355_GPIOBNK1] = 7,
[IRQ_DM355_GPIOBNK2] = 7,
[IRQ_DM355_GPIOBNK3] = 7,
[IRQ_DM355_GPIOBNK4] = 7,
[IRQ_DM355_GPIOBNK5] = 7,
[IRQ_DM355_GPIOBNK6] = 7,
[IRQ_COMMTX] = 7,
[IRQ_COMMRX] = 7,
[IRQ_EMUINT] = 7,
};
/*----------------------------------------------------------------------*/
static const s8 dma_chan_dm355_no_event[] = {
12, 13, 24, 56, 57,
58, 59, 60, 61, 62,
63,
-1
};
static const s8
queue_tc_mapping[][2] = {
/* {event queue no, TC no} */
{0, 0},
{1, 1},
{-1, -1},
};
static const s8
queue_priority_mapping[][2] = {
/* {event queue no, Priority} */
{0, 3},
{1, 7},
{-1, -1},
};
static struct edma_soc_info dm355_edma_info[] = {
{
.n_channel = 64,
.n_region = 4,
.n_slot = 128,
.n_tc = 2,
.n_cc = 1,
.noevent = dma_chan_dm355_no_event,
.queue_tc_mapping = queue_tc_mapping,
.queue_priority_mapping = queue_priority_mapping,
},
};
static struct resource edma_resources[] = {
{
.name = "edma_cc0",
.start = 0x01c00000,
.end = 0x01c00000 + SZ_64K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc0",
.start = 0x01c10000,
.end = 0x01c10000 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc1",
.start = 0x01c10400,
.end = 0x01c10400 + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma0",
.start = IRQ_CCINT0,
.flags = IORESOURCE_IRQ,
},
{
.name = "edma0_err",
.start = IRQ_CCERRINT,
.flags = IORESOURCE_IRQ,
},
/* not using (or muxing) TC*_ERR */
};
static struct platform_device dm355_edma_device = {
.name = "edma",
.id = 0,
.dev.platform_data = dm355_edma_info,
.num_resources = ARRAY_SIZE(edma_resources),
.resource = edma_resources,
};
static struct resource dm355_asp1_resources[] = {
{
.start = DAVINCI_ASP1_BASE,
.end = DAVINCI_ASP1_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
{
.start = DAVINCI_DMA_ASP1_TX,
.end = DAVINCI_DMA_ASP1_TX,
.flags = IORESOURCE_DMA,
},
{
.start = DAVINCI_DMA_ASP1_RX,
.end = DAVINCI_DMA_ASP1_RX,
.flags = IORESOURCE_DMA,
},
};
static struct platform_device dm355_asp1_device = {
.name = "davinci-asp",
.id = 1,
.num_resources = ARRAY_SIZE(dm355_asp1_resources),
.resource = dm355_asp1_resources,
};
static struct resource dm355_vpss_resources[] = {
{
/* VPSS BL Base address */
.name = "vpss",
.start = 0x01c70800,
.end = 0x01c70800 + 0xff,
.flags = IORESOURCE_MEM,
},
{
/* VPSS CLK Base address */
.name = "vpss",
.start = 0x01c70000,
.end = 0x01c70000 + 0xf,
.flags = IORESOURCE_MEM,
},
};
static struct platform_device dm355_vpss_device = {
.name = "vpss",
.id = -1,
.dev.platform_data = "dm355_vpss",
.num_resources = ARRAY_SIZE(dm355_vpss_resources),
.resource = dm355_vpss_resources,
};
static struct resource vpfe_resources[] = {
{
.start = IRQ_VDINT0,
.end = IRQ_VDINT0,
.flags = IORESOURCE_IRQ,
},
{
.start = IRQ_VDINT1,
.end = IRQ_VDINT1,
.flags = IORESOURCE_IRQ,
},
/* CCDC Base address */
{
.flags = IORESOURCE_MEM,
.start = 0x01c70600,
.end = 0x01c70600 + 0x1ff,
},
};
static u64 vpfe_capture_dma_mask = DMA_BIT_MASK(32);
static struct platform_device vpfe_capture_dev = {
.name = CAPTURE_DRV_NAME,
.id = -1,
.num_resources = ARRAY_SIZE(vpfe_resources),
.resource = vpfe_resources,
.dev = {
.dma_mask = &vpfe_capture_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
};
void dm355_set_vpfe_config(struct vpfe_config *cfg)
{
vpfe_capture_dev.dev.platform_data = cfg;
}
/*----------------------------------------------------------------------*/
static struct map_desc dm355_io_desc[] = {
{
.virtual = IO_VIRT,
.pfn = __phys_to_pfn(IO_PHYS),
.length = IO_SIZE,
.type = MT_DEVICE
},
{
.virtual = SRAM_VIRT,
.pfn = __phys_to_pfn(0x00010000),
.length = SZ_32K,
/* MT_MEMORY_NONCACHED requires supersection alignment */
.type = MT_DEVICE,
},
};
/* Contents of JTAG ID register used to identify exact cpu type */
static struct davinci_id dm355_ids[] = {
{
.variant = 0x0,
.part_no = 0xb73b,
.manufacturer = 0x00f,
.cpu_id = DAVINCI_CPU_ID_DM355,
.name = "dm355",
},
};
static void __iomem *dm355_psc_bases[] = {
IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE),
};
/*
* T0_BOT: Timer 0, bottom: clockevent source for hrtimers
* T0_TOP: Timer 0, top : clocksource for generic timekeeping
* T1_BOT: Timer 1, bottom: (used by DSP in TI DSPLink code)
* T1_TOP: Timer 1, top : <unused>
*/
struct davinci_timer_info dm355_timer_info = {
.timers = davinci_timer_instance,
.clockevent_id = T0_BOT,
.clocksource_id = T0_TOP,
};
static struct plat_serial8250_port dm355_serial_platform_data[] = {
{
.mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DAVINCI_UART1_BASE,
.irq = IRQ_UARTINT1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.mapbase = DM355_UART2_BASE,
.irq = IRQ_DM355_UARTINT2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
},
{
.flags = 0
},
};
static struct platform_device dm355_serial_device = {
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev = {
.platform_data = dm355_serial_platform_data,
},
};
static struct davinci_soc_info davinci_soc_info_dm355 = {
.io_desc = dm355_io_desc,
.io_desc_num = ARRAY_SIZE(dm355_io_desc),
.jtag_id_base = IO_ADDRESS(0x01c40028),
.ids = dm355_ids,
.ids_num = ARRAY_SIZE(dm355_ids),
.cpu_clks = dm355_clks,
.psc_bases = dm355_psc_bases,
.psc_bases_num = ARRAY_SIZE(dm355_psc_bases),
.pinmux_base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE),
.pinmux_pins = dm355_pins,
.pinmux_pins_num = ARRAY_SIZE(dm355_pins),
.intc_base = IO_ADDRESS(DAVINCI_ARM_INTC_BASE),
.intc_type = DAVINCI_INTC_TYPE_AINTC,
.intc_irq_prios = dm355_default_priorities,
.intc_irq_num = DAVINCI_N_AINTC_IRQ,
.timer_info = &dm355_timer_info,
.gpio_base = IO_ADDRESS(DAVINCI_GPIO_BASE),
.gpio_num = 104,
.gpio_irq = IRQ_DM355_GPIOBNK0,
.serial_dev = &dm355_serial_device,
.sram_dma = 0x00010000,
.sram_len = SZ_32K,
};
void __init dm355_init_asp1(u32 evt_enable, struct snd_platform_data *pdata)
{
/* we don't use ASP1 IRQs, or we'd need to mux them ... */
if (evt_enable & ASP1_TX_EVT_EN)
davinci_cfg_reg(DM355_EVT8_ASP1_TX);
if (evt_enable & ASP1_RX_EVT_EN)
davinci_cfg_reg(DM355_EVT9_ASP1_RX);
dm355_asp1_device.dev.platform_data = pdata;
platform_device_register(&dm355_asp1_device);
}
void __init dm355_init(void)
{
davinci_common_init(&davinci_soc_info_dm355);
}
static int __init dm355_init_devices(void)
{
if (!cpu_is_davinci_dm355())
return 0;
davinci_cfg_reg(DM355_INT_EDMA_CC);
platform_device_register(&dm355_edma_device);
platform_device_register(&dm355_vpss_device);
/*
* setup Mux configuration for vpfe input and register
* vpfe capture platform device
*/
davinci_cfg_reg(DM355_VIN_PCLK);
davinci_cfg_reg(DM355_VIN_CAM_WEN);
davinci_cfg_reg(DM355_VIN_CAM_VD);
davinci_cfg_reg(DM355_VIN_CAM_HD);
davinci_cfg_reg(DM355_VIN_YIN_EN);
davinci_cfg_reg(DM355_VIN_CINL_EN);
davinci_cfg_reg(DM355_VIN_CINH_EN);
platform_device_register(&vpfe_capture_dev);
return 0;
}
postcore_initcall(dm355_init_devices);
Reference in New Issue View Git Blame Copy Permalink