linux/fs/btrfs/lzo.c
Qu Wenruo a6e66e6f8c btrfs: rework lzo_decompress_bio() to make it subpage compatible
For the initial subpage support, although we won't support compressed
write, we still need to support compressed read.

But for lzo_decompress_bio() it has several problems:

- The abuse of PAGE_SIZE for boundary detection
  For subpage case, we should follow sectorsize to detect the padding
  zeros.
  Using PAGE_SIZE will cause subpage compress read to skip certain
  bytes, and causing read error.

- Too many helper variables
  There are half a dozen helper variables, which is only making things
  harder to read

This patch will rework lzo_decompress_bio() to make it work for subpage:

- Use sectorsize to do boundary check, while still use PAGE_SIZE for
  page switching
  This allows us to have the same on-disk format for 4K sectorsize fs,
  while take advantage of larger page size.

- Use two main cursors
  Only @cur_in and @cur_out is utilized as the main cursor.
  The helper variables will only be declared inside the loop, and only 2
  helper variables needed.

- Introduce a helper function to copy compressed segment payload
  Introduce a new helper, copy_compressed_segment(), to copy a
  compressed segment to workspace buffer.
  This function will handle the page switching.

Now the net result is, with all the excessive comments and new helper
function, the refactored code is still smaller, and easier to read.

For other decompression code, they have no special padding rule, thus no
need to bother for initial subpage support, but will be refactored to
the same style later.

Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
2021-08-23 13:19:04 +02:00

453 lines
11 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2008 Oracle. All rights reserved.
*/
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/sched.h>
#include <linux/pagemap.h>
#include <linux/bio.h>
#include <linux/lzo.h>
#include <linux/refcount.h>
#include "compression.h"
#include "ctree.h"
#define LZO_LEN 4
/*
* Btrfs LZO compression format
*
* Regular and inlined LZO compressed data extents consist of:
*
* 1. Header
* Fixed size. LZO_LEN (4) bytes long, LE32.
* Records the total size (including the header) of compressed data.
*
* 2. Segment(s)
* Variable size. Each segment includes one segment header, followed by data
* payload.
* One regular LZO compressed extent can have one or more segments.
* For inlined LZO compressed extent, only one segment is allowed.
* One segment represents at most one page of uncompressed data.
*
* 2.1 Segment header
* Fixed size. LZO_LEN (4) bytes long, LE32.
* Records the total size of the segment (not including the header).
* Segment header never crosses page boundary, thus it's possible to
* have at most 3 padding zeros at the end of the page.
*
* 2.2 Data Payload
* Variable size. Size up limit should be lzo1x_worst_compress(PAGE_SIZE)
* which is 4419 for a 4KiB page.
*
* Example:
* Page 1:
* 0 0x2 0x4 0x6 0x8 0xa 0xc 0xe 0x10
* 0x0000 | Header | SegHdr 01 | Data payload 01 ... |
* ...
* 0x0ff0 | SegHdr N | Data payload N ... |00|
* ^^ padding zeros
* Page 2:
* 0x1000 | SegHdr N+1| Data payload N+1 ... |
*/
struct workspace {
void *mem;
void *buf; /* where decompressed data goes */
void *cbuf; /* where compressed data goes */
struct list_head list;
};
static struct workspace_manager wsm;
void lzo_free_workspace(struct list_head *ws)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
kvfree(workspace->buf);
kvfree(workspace->cbuf);
kvfree(workspace->mem);
kfree(workspace);
}
struct list_head *lzo_alloc_workspace(unsigned int level)
{
struct workspace *workspace;
workspace = kzalloc(sizeof(*workspace), GFP_KERNEL);
if (!workspace)
return ERR_PTR(-ENOMEM);
workspace->mem = kvmalloc(LZO1X_MEM_COMPRESS, GFP_KERNEL);
workspace->buf = kvmalloc(lzo1x_worst_compress(PAGE_SIZE), GFP_KERNEL);
workspace->cbuf = kvmalloc(lzo1x_worst_compress(PAGE_SIZE), GFP_KERNEL);
if (!workspace->mem || !workspace->buf || !workspace->cbuf)
goto fail;
INIT_LIST_HEAD(&workspace->list);
return &workspace->list;
fail:
lzo_free_workspace(&workspace->list);
return ERR_PTR(-ENOMEM);
}
static inline void write_compress_length(char *buf, size_t len)
{
__le32 dlen;
dlen = cpu_to_le32(len);
memcpy(buf, &dlen, LZO_LEN);
}
static inline size_t read_compress_length(const char *buf)
{
__le32 dlen;
memcpy(&dlen, buf, LZO_LEN);
return le32_to_cpu(dlen);
}
int lzo_compress_pages(struct list_head *ws, struct address_space *mapping,
u64 start, struct page **pages, unsigned long *out_pages,
unsigned long *total_in, unsigned long *total_out)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
int ret = 0;
char *data_in;
char *cpage_out, *sizes_ptr;
int nr_pages = 0;
struct page *in_page = NULL;
struct page *out_page = NULL;
unsigned long bytes_left;
unsigned long len = *total_out;
unsigned long nr_dest_pages = *out_pages;
const unsigned long max_out = nr_dest_pages * PAGE_SIZE;
size_t in_len;
size_t out_len;
char *buf;
unsigned long tot_in = 0;
unsigned long tot_out = 0;
unsigned long pg_bytes_left;
unsigned long out_offset;
unsigned long bytes;
*out_pages = 0;
*total_out = 0;
*total_in = 0;
in_page = find_get_page(mapping, start >> PAGE_SHIFT);
data_in = page_address(in_page);
/*
* store the size of all chunks of compressed data in
* the first 4 bytes
*/
out_page = alloc_page(GFP_NOFS);
if (out_page == NULL) {
ret = -ENOMEM;
goto out;
}
cpage_out = page_address(out_page);
out_offset = LZO_LEN;
tot_out = LZO_LEN;
pages[0] = out_page;
nr_pages = 1;
pg_bytes_left = PAGE_SIZE - LZO_LEN;
/* compress at most one page of data each time */
in_len = min(len, PAGE_SIZE);
while (tot_in < len) {
ret = lzo1x_1_compress(data_in, in_len, workspace->cbuf,
&out_len, workspace->mem);
if (ret != LZO_E_OK) {
pr_debug("BTRFS: lzo in loop returned %d\n",
ret);
ret = -EIO;
goto out;
}
/* store the size of this chunk of compressed data */
write_compress_length(cpage_out + out_offset, out_len);
tot_out += LZO_LEN;
out_offset += LZO_LEN;
pg_bytes_left -= LZO_LEN;
tot_in += in_len;
tot_out += out_len;
/* copy bytes from the working buffer into the pages */
buf = workspace->cbuf;
while (out_len) {
bytes = min_t(unsigned long, pg_bytes_left, out_len);
memcpy(cpage_out + out_offset, buf, bytes);
out_len -= bytes;
pg_bytes_left -= bytes;
buf += bytes;
out_offset += bytes;
/*
* we need another page for writing out.
*
* Note if there's less than 4 bytes left, we just
* skip to a new page.
*/
if ((out_len == 0 && pg_bytes_left < LZO_LEN) ||
pg_bytes_left == 0) {
if (pg_bytes_left) {
memset(cpage_out + out_offset, 0,
pg_bytes_left);
tot_out += pg_bytes_left;
}
/* we're done, don't allocate new page */
if (out_len == 0 && tot_in >= len)
break;
if (nr_pages == nr_dest_pages) {
out_page = NULL;
ret = -E2BIG;
goto out;
}
out_page = alloc_page(GFP_NOFS);
if (out_page == NULL) {
ret = -ENOMEM;
goto out;
}
cpage_out = page_address(out_page);
pages[nr_pages++] = out_page;
pg_bytes_left = PAGE_SIZE;
out_offset = 0;
}
}
/* we're making it bigger, give up */
if (tot_in > 8192 && tot_in < tot_out) {
ret = -E2BIG;
goto out;
}
/* we're all done */
if (tot_in >= len)
break;
if (tot_out > max_out)
break;
bytes_left = len - tot_in;
put_page(in_page);
start += PAGE_SIZE;
in_page = find_get_page(mapping, start >> PAGE_SHIFT);
data_in = page_address(in_page);
in_len = min(bytes_left, PAGE_SIZE);
}
if (tot_out >= tot_in) {
ret = -E2BIG;
goto out;
}
/* store the size of all chunks of compressed data */
sizes_ptr = page_address(pages[0]);
write_compress_length(sizes_ptr, tot_out);
ret = 0;
*total_out = tot_out;
*total_in = tot_in;
out:
*out_pages = nr_pages;
if (in_page)
put_page(in_page);
return ret;
}
/*
* Copy the compressed segment payload into @dest.
*
* For the payload there will be no padding, just need to do page switching.
*/
static void copy_compressed_segment(struct compressed_bio *cb,
char *dest, u32 len, u32 *cur_in)
{
u32 orig_in = *cur_in;
while (*cur_in < orig_in + len) {
struct page *cur_page;
u32 copy_len = min_t(u32, PAGE_SIZE - offset_in_page(*cur_in),
orig_in + len - *cur_in);
ASSERT(copy_len);
cur_page = cb->compressed_pages[*cur_in / PAGE_SIZE];
memcpy(dest + *cur_in - orig_in,
page_address(cur_page) + offset_in_page(*cur_in),
copy_len);
*cur_in += copy_len;
}
}
int lzo_decompress_bio(struct list_head *ws, struct compressed_bio *cb)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
const struct btrfs_fs_info *fs_info = btrfs_sb(cb->inode->i_sb);
const u32 sectorsize = fs_info->sectorsize;
int ret;
/* Compressed data length, can be unaligned */
u32 len_in;
/* Offset inside the compressed data */
u32 cur_in = 0;
/* Bytes decompressed so far */
u32 cur_out = 0;
len_in = read_compress_length(page_address(cb->compressed_pages[0]));
cur_in += LZO_LEN;
/*
* LZO header length check
*
* The total length should not exceed the maximum extent length,
* and all sectors should be used.
* If this happens, it means the compressed extent is corrupted.
*/
if (len_in > min_t(size_t, BTRFS_MAX_COMPRESSED, cb->compressed_len) ||
round_up(len_in, sectorsize) < cb->compressed_len) {
btrfs_err(fs_info,
"invalid lzo header, lzo len %u compressed len %u",
len_in, cb->compressed_len);
return -EUCLEAN;
}
/* Go through each lzo segment */
while (cur_in < len_in) {
struct page *cur_page;
/* Length of the compressed segment */
u32 seg_len;
u32 sector_bytes_left;
size_t out_len = lzo1x_worst_compress(sectorsize);
/*
* We should always have enough space for one segment header
* inside current sector.
*/
ASSERT(cur_in / sectorsize ==
(cur_in + LZO_LEN - 1) / sectorsize);
cur_page = cb->compressed_pages[cur_in / PAGE_SIZE];
ASSERT(cur_page);
seg_len = read_compress_length(page_address(cur_page) +
offset_in_page(cur_in));
cur_in += LZO_LEN;
/* Copy the compressed segment payload into workspace */
copy_compressed_segment(cb, workspace->cbuf, seg_len, &cur_in);
/* Decompress the data */
ret = lzo1x_decompress_safe(workspace->cbuf, seg_len,
workspace->buf, &out_len);
if (ret != LZO_E_OK) {
btrfs_err(fs_info, "failed to decompress");
ret = -EIO;
goto out;
}
/* Copy the data into inode pages */
ret = btrfs_decompress_buf2page(workspace->buf, out_len, cb, cur_out);
cur_out += out_len;
/* All data read, exit */
if (ret == 0)
goto out;
ret = 0;
/* Check if the sector has enough space for a segment header */
sector_bytes_left = sectorsize - (cur_in % sectorsize);
if (sector_bytes_left >= LZO_LEN)
continue;
/* Skip the padding zeros */
cur_in += sector_bytes_left;
}
out:
if (!ret)
zero_fill_bio(cb->orig_bio);
return ret;
}
int lzo_decompress(struct list_head *ws, unsigned char *data_in,
struct page *dest_page, unsigned long start_byte, size_t srclen,
size_t destlen)
{
struct workspace *workspace = list_entry(ws, struct workspace, list);
size_t in_len;
size_t out_len;
size_t max_segment_len = lzo1x_worst_compress(PAGE_SIZE);
int ret = 0;
char *kaddr;
unsigned long bytes;
if (srclen < LZO_LEN || srclen > max_segment_len + LZO_LEN * 2)
return -EUCLEAN;
in_len = read_compress_length(data_in);
if (in_len != srclen)
return -EUCLEAN;
data_in += LZO_LEN;
in_len = read_compress_length(data_in);
if (in_len != srclen - LZO_LEN * 2) {
ret = -EUCLEAN;
goto out;
}
data_in += LZO_LEN;
out_len = PAGE_SIZE;
ret = lzo1x_decompress_safe(data_in, in_len, workspace->buf, &out_len);
if (ret != LZO_E_OK) {
pr_warn("BTRFS: decompress failed!\n");
ret = -EIO;
goto out;
}
if (out_len < start_byte) {
ret = -EIO;
goto out;
}
/*
* the caller is already checking against PAGE_SIZE, but lets
* move this check closer to the memcpy/memset
*/
destlen = min_t(unsigned long, destlen, PAGE_SIZE);
bytes = min_t(unsigned long, destlen, out_len - start_byte);
kaddr = page_address(dest_page);
memcpy(kaddr, workspace->buf + start_byte, bytes);
/*
* btrfs_getblock is doing a zero on the tail of the page too,
* but this will cover anything missing from the decompressed
* data.
*/
if (bytes < destlen)
memset(kaddr+bytes, 0, destlen-bytes);
out:
return ret;
}
const struct btrfs_compress_op btrfs_lzo_compress = {
.workspace_manager = &wsm,
.max_level = 1,
.default_level = 1,
};