mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
72e06d0872
The OMAP powerdomain code and data is all OMAP2+-specific. This seems unlikely to change any time soon. Move plat-omap/include/plat/powerdomain.h to mach-omap2/powerdomain.h. The primary point of doing this is to remove the temptation for unrelated upper-layer code to access powerdomain code and data directly. As part of this process, remove the references to powerdomain data from the GPIO "driver" and the OMAP PM no-op layer, both in plat-omap. Change the DSPBridge code to point to the new location for the powerdomain headers. The DSPBridge code should not be including the powerdomain headers; these should be removed. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Kevin Hilman <khilman@deeprootsystems.com> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Felipe Contreras <felipe.contreras@gmail.com> Cc: Greg Kroah-Hartman <greg@kroah.com>
1022 lines
28 KiB
C
1022 lines
28 KiB
C
/*
|
|
* OMAP2/3/4 clockdomain framework functions
|
|
*
|
|
* Copyright (C) 2008-2010 Texas Instruments, Inc.
|
|
* Copyright (C) 2008-2010 Nokia Corporation
|
|
*
|
|
* Written by Paul Walmsley and Jouni Högander
|
|
* Added OMAP4 specific support by Abhijit Pagare <abhijitpagare@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
#undef DEBUG
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/list.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/limits.h>
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/io.h>
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#include "prm2xxx_3xxx.h"
|
|
#include "prm-regbits-24xx.h"
|
|
#include "cm2xxx_3xxx.h"
|
|
#include "cm-regbits-24xx.h"
|
|
#include "cminst44xx.h"
|
|
#include "prcm44xx.h"
|
|
|
|
#include <plat/clock.h>
|
|
#include "powerdomain.h"
|
|
#include "clockdomain.h"
|
|
#include <plat/prcm.h>
|
|
|
|
/* clkdm_list contains all registered struct clockdomains */
|
|
static LIST_HEAD(clkdm_list);
|
|
|
|
/* array of clockdomain deps to be added/removed when clkdm in hwsup mode */
|
|
static struct clkdm_autodep *autodeps;
|
|
|
|
|
|
/* Private functions */
|
|
|
|
static struct clockdomain *_clkdm_lookup(const char *name)
|
|
{
|
|
struct clockdomain *clkdm, *temp_clkdm;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
clkdm = NULL;
|
|
|
|
list_for_each_entry(temp_clkdm, &clkdm_list, node) {
|
|
if (!strcmp(name, temp_clkdm->name)) {
|
|
clkdm = temp_clkdm;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return clkdm;
|
|
}
|
|
|
|
/**
|
|
* _clkdm_register - register a clockdomain
|
|
* @clkdm: struct clockdomain * to register
|
|
*
|
|
* Adds a clockdomain to the internal clockdomain list.
|
|
* Returns -EINVAL if given a null pointer, -EEXIST if a clockdomain is
|
|
* already registered by the provided name, or 0 upon success.
|
|
*/
|
|
static int _clkdm_register(struct clockdomain *clkdm)
|
|
{
|
|
struct powerdomain *pwrdm;
|
|
|
|
if (!clkdm || !clkdm->name)
|
|
return -EINVAL;
|
|
|
|
if (!omap_chip_is(clkdm->omap_chip))
|
|
return -EINVAL;
|
|
|
|
pwrdm = pwrdm_lookup(clkdm->pwrdm.name);
|
|
if (!pwrdm) {
|
|
pr_err("clockdomain: %s: powerdomain %s does not exist\n",
|
|
clkdm->name, clkdm->pwrdm.name);
|
|
return -EINVAL;
|
|
}
|
|
clkdm->pwrdm.ptr = pwrdm;
|
|
|
|
/* Verify that the clockdomain is not already registered */
|
|
if (_clkdm_lookup(clkdm->name))
|
|
return -EEXIST;
|
|
|
|
list_add(&clkdm->node, &clkdm_list);
|
|
|
|
pwrdm_add_clkdm(pwrdm, clkdm);
|
|
|
|
pr_debug("clockdomain: registered %s\n", clkdm->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* _clkdm_deps_lookup - look up the specified clockdomain in a clkdm list */
|
|
static struct clkdm_dep *_clkdm_deps_lookup(struct clockdomain *clkdm,
|
|
struct clkdm_dep *deps)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!clkdm || !deps || !omap_chip_is(clkdm->omap_chip))
|
|
return ERR_PTR(-EINVAL);
|
|
|
|
for (cd = deps; cd->clkdm_name; cd++) {
|
|
if (!omap_chip_is(cd->omap_chip))
|
|
continue;
|
|
|
|
if (!cd->clkdm && cd->clkdm_name)
|
|
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
|
|
|
|
if (cd->clkdm == clkdm)
|
|
break;
|
|
}
|
|
|
|
if (!cd->clkdm_name)
|
|
return ERR_PTR(-ENOENT);
|
|
|
|
return cd;
|
|
}
|
|
|
|
/*
|
|
* _autodep_lookup - resolve autodep clkdm names to clkdm pointers; store
|
|
* @autodep: struct clkdm_autodep * to resolve
|
|
*
|
|
* Resolve autodep clockdomain names to clockdomain pointers via
|
|
* clkdm_lookup() and store the pointers in the autodep structure. An
|
|
* "autodep" is a clockdomain sleep/wakeup dependency that is
|
|
* automatically added and removed whenever clocks in the associated
|
|
* clockdomain are enabled or disabled (respectively) when the
|
|
* clockdomain is in hardware-supervised mode. Meant to be called
|
|
* once at clockdomain layer initialization, since these should remain
|
|
* fixed for a particular architecture. No return value.
|
|
*
|
|
* XXX autodeps are deprecated and should be removed at the earliest
|
|
* opportunity
|
|
*/
|
|
static void _autodep_lookup(struct clkdm_autodep *autodep)
|
|
{
|
|
struct clockdomain *clkdm;
|
|
|
|
if (!autodep)
|
|
return;
|
|
|
|
if (!omap_chip_is(autodep->omap_chip))
|
|
return;
|
|
|
|
clkdm = clkdm_lookup(autodep->clkdm.name);
|
|
if (!clkdm) {
|
|
pr_err("clockdomain: autodeps: clockdomain %s does not exist\n",
|
|
autodep->clkdm.name);
|
|
clkdm = ERR_PTR(-ENOENT);
|
|
}
|
|
autodep->clkdm.ptr = clkdm;
|
|
}
|
|
|
|
/*
|
|
* _clkdm_add_autodeps - add auto sleepdeps/wkdeps to clkdm upon clock enable
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Add the "autodep" sleep & wakeup dependencies to clockdomain 'clkdm'
|
|
* in hardware-supervised mode. Meant to be called from clock framework
|
|
* when a clock inside clockdomain 'clkdm' is enabled. No return value.
|
|
*
|
|
* XXX autodeps are deprecated and should be removed at the earliest
|
|
* opportunity
|
|
*/
|
|
static void _clkdm_add_autodeps(struct clockdomain *clkdm)
|
|
{
|
|
struct clkdm_autodep *autodep;
|
|
|
|
if (!autodeps)
|
|
return;
|
|
|
|
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
|
|
if (IS_ERR(autodep->clkdm.ptr))
|
|
continue;
|
|
|
|
if (!omap_chip_is(autodep->omap_chip))
|
|
continue;
|
|
|
|
pr_debug("clockdomain: adding %s sleepdep/wkdep for "
|
|
"clkdm %s\n", autodep->clkdm.ptr->name,
|
|
clkdm->name);
|
|
|
|
clkdm_add_sleepdep(clkdm, autodep->clkdm.ptr);
|
|
clkdm_add_wkdep(clkdm, autodep->clkdm.ptr);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* _clkdm_add_autodeps - remove auto sleepdeps/wkdeps from clkdm
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Remove the "autodep" sleep & wakeup dependencies from clockdomain 'clkdm'
|
|
* in hardware-supervised mode. Meant to be called from clock framework
|
|
* when a clock inside clockdomain 'clkdm' is disabled. No return value.
|
|
*
|
|
* XXX autodeps are deprecated and should be removed at the earliest
|
|
* opportunity
|
|
*/
|
|
static void _clkdm_del_autodeps(struct clockdomain *clkdm)
|
|
{
|
|
struct clkdm_autodep *autodep;
|
|
|
|
if (!autodeps)
|
|
return;
|
|
|
|
for (autodep = autodeps; autodep->clkdm.ptr; autodep++) {
|
|
if (IS_ERR(autodep->clkdm.ptr))
|
|
continue;
|
|
|
|
if (!omap_chip_is(autodep->omap_chip))
|
|
continue;
|
|
|
|
pr_debug("clockdomain: removing %s sleepdep/wkdep for "
|
|
"clkdm %s\n", autodep->clkdm.ptr->name,
|
|
clkdm->name);
|
|
|
|
clkdm_del_sleepdep(clkdm, autodep->clkdm.ptr);
|
|
clkdm_del_wkdep(clkdm, autodep->clkdm.ptr);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _enable_hwsup - place a clockdomain into hardware-supervised idle
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Place the clockdomain into hardware-supervised idle mode. No return
|
|
* value.
|
|
*
|
|
* XXX Should this return an error if the clockdomain does not support
|
|
* hardware-supervised idle mode?
|
|
*/
|
|
static void _enable_hwsup(struct clockdomain *clkdm)
|
|
{
|
|
if (cpu_is_omap24xx())
|
|
omap2xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
else if (cpu_is_omap34xx())
|
|
omap3xxx_cm_clkdm_enable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
else if (cpu_is_omap44xx())
|
|
return omap4_cminst_clkdm_enable_hwsup(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
/**
|
|
* _disable_hwsup - place a clockdomain into software-supervised idle
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Place the clockdomain @clkdm into software-supervised idle mode.
|
|
* No return value.
|
|
*
|
|
* XXX Should this return an error if the clockdomain does not support
|
|
* software-supervised idle mode?
|
|
*/
|
|
static void _disable_hwsup(struct clockdomain *clkdm)
|
|
{
|
|
if (cpu_is_omap24xx())
|
|
omap2xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
else if (cpu_is_omap34xx())
|
|
omap3xxx_cm_clkdm_disable_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
else if (cpu_is_omap44xx())
|
|
return omap4_cminst_clkdm_disable_hwsup(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
else
|
|
BUG();
|
|
}
|
|
|
|
/* Public functions */
|
|
|
|
/**
|
|
* clkdm_init - set up the clockdomain layer
|
|
* @clkdms: optional pointer to an array of clockdomains to register
|
|
* @init_autodeps: optional pointer to an array of autodeps to register
|
|
*
|
|
* Set up internal state. If a pointer to an array of clockdomains
|
|
* @clkdms was supplied, loop through the list of clockdomains,
|
|
* register all that are available on the current platform. Similarly,
|
|
* if a pointer to an array of clockdomain autodependencies
|
|
* @init_autodeps was provided, register those. No return value.
|
|
*/
|
|
void clkdm_init(struct clockdomain **clkdms,
|
|
struct clkdm_autodep *init_autodeps)
|
|
{
|
|
struct clockdomain **c = NULL;
|
|
struct clockdomain *clkdm;
|
|
struct clkdm_autodep *autodep = NULL;
|
|
|
|
if (clkdms)
|
|
for (c = clkdms; *c; c++)
|
|
_clkdm_register(*c);
|
|
|
|
autodeps = init_autodeps;
|
|
if (autodeps)
|
|
for (autodep = autodeps; autodep->clkdm.ptr; autodep++)
|
|
_autodep_lookup(autodep);
|
|
|
|
/*
|
|
* Put all clockdomains into software-supervised mode; PM code
|
|
* should later enable hardware-supervised mode as appropriate
|
|
*/
|
|
list_for_each_entry(clkdm, &clkdm_list, node) {
|
|
if (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)
|
|
omap2_clkdm_wakeup(clkdm);
|
|
else if (clkdm->flags & CLKDM_CAN_DISABLE_AUTO)
|
|
omap2_clkdm_deny_idle(clkdm);
|
|
|
|
clkdm_clear_all_wkdeps(clkdm);
|
|
clkdm_clear_all_sleepdeps(clkdm);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* clkdm_lookup - look up a clockdomain by name, return a pointer
|
|
* @name: name of clockdomain
|
|
*
|
|
* Find a registered clockdomain by its name @name. Returns a pointer
|
|
* to the struct clockdomain if found, or NULL otherwise.
|
|
*/
|
|
struct clockdomain *clkdm_lookup(const char *name)
|
|
{
|
|
struct clockdomain *clkdm, *temp_clkdm;
|
|
|
|
if (!name)
|
|
return NULL;
|
|
|
|
clkdm = NULL;
|
|
|
|
list_for_each_entry(temp_clkdm, &clkdm_list, node) {
|
|
if (!strcmp(name, temp_clkdm->name)) {
|
|
clkdm = temp_clkdm;
|
|
break;
|
|
}
|
|
}
|
|
|
|
return clkdm;
|
|
}
|
|
|
|
/**
|
|
* clkdm_for_each - call function on each registered clockdomain
|
|
* @fn: callback function *
|
|
*
|
|
* Call the supplied function @fn for each registered clockdomain.
|
|
* The callback function @fn can return anything but 0 to bail
|
|
* out early from the iterator. The callback function is called with
|
|
* the clkdm_mutex held, so no clockdomain structure manipulation
|
|
* functions should be called from the callback, although hardware
|
|
* clockdomain control functions are fine. Returns the last return
|
|
* value of the callback function, which should be 0 for success or
|
|
* anything else to indicate failure; or -EINVAL if the function pointer
|
|
* is null.
|
|
*/
|
|
int clkdm_for_each(int (*fn)(struct clockdomain *clkdm, void *user),
|
|
void *user)
|
|
{
|
|
struct clockdomain *clkdm;
|
|
int ret = 0;
|
|
|
|
if (!fn)
|
|
return -EINVAL;
|
|
|
|
list_for_each_entry(clkdm, &clkdm_list, node) {
|
|
ret = (*fn)(clkdm, user);
|
|
if (ret)
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
|
|
/**
|
|
* clkdm_get_pwrdm - return a ptr to the pwrdm that this clkdm resides in
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Return a pointer to the struct powerdomain that the specified clockdomain
|
|
* @clkdm exists in, or returns NULL if @clkdm is NULL.
|
|
*/
|
|
struct powerdomain *clkdm_get_pwrdm(struct clockdomain *clkdm)
|
|
{
|
|
if (!clkdm)
|
|
return NULL;
|
|
|
|
return clkdm->pwrdm.ptr;
|
|
}
|
|
|
|
|
|
/* Hardware clockdomain control */
|
|
|
|
/**
|
|
* clkdm_add_wkdep - add a wakeup dependency from clkdm2 to clkdm1
|
|
* @clkdm1: wake this struct clockdomain * up (dependent)
|
|
* @clkdm2: when this struct clockdomain * wakes up (source)
|
|
*
|
|
* When the clockdomain represented by @clkdm2 wakes up, wake up
|
|
* @clkdm1. Implemented in hardware on the OMAP, this feature is
|
|
* designed to reduce wakeup latency of the dependent clockdomain @clkdm1.
|
|
* Returns -EINVAL if presented with invalid clockdomain pointers,
|
|
* -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or 0 upon
|
|
* success.
|
|
*/
|
|
int clkdm_add_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear wake up of "
|
|
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
if (atomic_inc_return(&cd->wkdep_usecount) == 1) {
|
|
pr_debug("clockdomain: hardware will wake up %s when %s wakes "
|
|
"up\n", clkdm1->name, clkdm2->name);
|
|
|
|
omap2_prm_set_mod_reg_bits((1 << clkdm2->dep_bit),
|
|
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clkdm_del_wkdep - remove a wakeup dependency from clkdm2 to clkdm1
|
|
* @clkdm1: wake this struct clockdomain * up (dependent)
|
|
* @clkdm2: when this struct clockdomain * wakes up (source)
|
|
*
|
|
* Remove a wakeup dependency causing @clkdm1 to wake up when @clkdm2
|
|
* wakes up. Returns -EINVAL if presented with invalid clockdomain
|
|
* pointers, -ENOENT if @clkdm2 cannot wake up clkdm1 in hardware, or
|
|
* 0 upon success.
|
|
*/
|
|
int clkdm_del_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear wake up of "
|
|
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
if (atomic_dec_return(&cd->wkdep_usecount) == 0) {
|
|
pr_debug("clockdomain: hardware will no longer wake up %s "
|
|
"after %s wakes up\n", clkdm1->name, clkdm2->name);
|
|
|
|
omap2_prm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
|
|
clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clkdm_read_wkdep - read wakeup dependency state from clkdm2 to clkdm1
|
|
* @clkdm1: wake this struct clockdomain * up (dependent)
|
|
* @clkdm2: when this struct clockdomain * wakes up (source)
|
|
*
|
|
* Return 1 if a hardware wakeup dependency exists wherein @clkdm1 will be
|
|
* awoken when @clkdm2 wakes up; 0 if dependency is not set; -EINVAL
|
|
* if either clockdomain pointer is invalid; or -ENOENT if the hardware
|
|
* is incapable.
|
|
*
|
|
* REVISIT: Currently this function only represents software-controllable
|
|
* wakeup dependencies. Wakeup dependencies fixed in hardware are not
|
|
* yet handled here.
|
|
*/
|
|
int clkdm_read_wkdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->wkdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear wake up of "
|
|
"%s when %s wakes up\n", clkdm1->name, clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
/* XXX It's faster to return the atomic wkdep_usecount */
|
|
return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs, PM_WKDEP,
|
|
(1 << clkdm2->dep_bit));
|
|
}
|
|
|
|
/**
|
|
* clkdm_clear_all_wkdeps - remove all wakeup dependencies from target clkdm
|
|
* @clkdm: struct clockdomain * to remove all wakeup dependencies from
|
|
*
|
|
* Remove all inter-clockdomain wakeup dependencies that could cause
|
|
* @clkdm to wake. Intended to be used during boot to initialize the
|
|
* PRCM to a known state, after all clockdomains are put into swsup idle
|
|
* and woken up. Returns -EINVAL if @clkdm pointer is invalid, or
|
|
* 0 upon success.
|
|
*/
|
|
int clkdm_clear_all_wkdeps(struct clockdomain *clkdm)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
u32 mask = 0;
|
|
|
|
if (!clkdm)
|
|
return -EINVAL;
|
|
|
|
for (cd = clkdm->wkdep_srcs; cd && cd->clkdm_name; cd++) {
|
|
if (!omap_chip_is(cd->omap_chip))
|
|
continue;
|
|
|
|
if (!cd->clkdm && cd->clkdm_name)
|
|
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
|
|
|
|
/* PRM accesses are slow, so minimize them */
|
|
mask |= 1 << cd->clkdm->dep_bit;
|
|
atomic_set(&cd->wkdep_usecount, 0);
|
|
}
|
|
|
|
omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs, PM_WKDEP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clkdm_add_sleepdep - add a sleep dependency from clkdm2 to clkdm1
|
|
* @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
|
|
* @clkdm2: when this struct clockdomain * is active (source)
|
|
*
|
|
* Prevent @clkdm1 from automatically going inactive (and then to
|
|
* retention or off) if @clkdm2 is active. Returns -EINVAL if
|
|
* presented with invalid clockdomain pointers or called on a machine
|
|
* that does not support software-configurable hardware sleep
|
|
* dependencies, -ENOENT if the specified dependency cannot be set in
|
|
* hardware, or 0 upon success.
|
|
*/
|
|
int clkdm_add_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!cpu_is_omap34xx())
|
|
return -EINVAL;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear sleep "
|
|
"dependency affecting %s from %s\n", clkdm1->name,
|
|
clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
if (atomic_inc_return(&cd->sleepdep_usecount) == 1) {
|
|
pr_debug("clockdomain: will prevent %s from sleeping if %s "
|
|
"is active\n", clkdm1->name, clkdm2->name);
|
|
|
|
omap2_cm_set_mod_reg_bits((1 << clkdm2->dep_bit),
|
|
clkdm1->pwrdm.ptr->prcm_offs,
|
|
OMAP3430_CM_SLEEPDEP);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clkdm_del_sleepdep - remove a sleep dependency from clkdm2 to clkdm1
|
|
* @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
|
|
* @clkdm2: when this struct clockdomain * is active (source)
|
|
*
|
|
* Allow @clkdm1 to automatically go inactive (and then to retention or
|
|
* off), independent of the activity state of @clkdm2. Returns -EINVAL
|
|
* if presented with invalid clockdomain pointers or called on a machine
|
|
* that does not support software-configurable hardware sleep dependencies,
|
|
* -ENOENT if the specified dependency cannot be cleared in hardware, or
|
|
* 0 upon success.
|
|
*/
|
|
int clkdm_del_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!cpu_is_omap34xx())
|
|
return -EINVAL;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear sleep "
|
|
"dependency affecting %s from %s\n", clkdm1->name,
|
|
clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
if (atomic_dec_return(&cd->sleepdep_usecount) == 0) {
|
|
pr_debug("clockdomain: will no longer prevent %s from "
|
|
"sleeping if %s is active\n", clkdm1->name,
|
|
clkdm2->name);
|
|
|
|
omap2_cm_clear_mod_reg_bits((1 << clkdm2->dep_bit),
|
|
clkdm1->pwrdm.ptr->prcm_offs,
|
|
OMAP3430_CM_SLEEPDEP);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* clkdm_read_sleepdep - read sleep dependency state from clkdm2 to clkdm1
|
|
* @clkdm1: prevent this struct clockdomain * from sleeping (dependent)
|
|
* @clkdm2: when this struct clockdomain * is active (source)
|
|
*
|
|
* Return 1 if a hardware sleep dependency exists wherein @clkdm1 will
|
|
* not be allowed to automatically go inactive if @clkdm2 is active;
|
|
* 0 if @clkdm1's automatic power state inactivity transition is independent
|
|
* of @clkdm2's; -EINVAL if either clockdomain pointer is invalid or called
|
|
* on a machine that does not support software-configurable hardware sleep
|
|
* dependencies; or -ENOENT if the hardware is incapable.
|
|
*
|
|
* REVISIT: Currently this function only represents software-controllable
|
|
* sleep dependencies. Sleep dependencies fixed in hardware are not
|
|
* yet handled here.
|
|
*/
|
|
int clkdm_read_sleepdep(struct clockdomain *clkdm1, struct clockdomain *clkdm2)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
|
|
if (!cpu_is_omap34xx())
|
|
return -EINVAL;
|
|
|
|
if (!clkdm1 || !clkdm2)
|
|
return -EINVAL;
|
|
|
|
cd = _clkdm_deps_lookup(clkdm2, clkdm1->sleepdep_srcs);
|
|
if (IS_ERR(cd)) {
|
|
pr_debug("clockdomain: hardware cannot set/clear sleep "
|
|
"dependency affecting %s from %s\n", clkdm1->name,
|
|
clkdm2->name);
|
|
return PTR_ERR(cd);
|
|
}
|
|
|
|
/* XXX It's faster to return the atomic sleepdep_usecount */
|
|
return omap2_prm_read_mod_bits_shift(clkdm1->pwrdm.ptr->prcm_offs,
|
|
OMAP3430_CM_SLEEPDEP,
|
|
(1 << clkdm2->dep_bit));
|
|
}
|
|
|
|
/**
|
|
* clkdm_clear_all_sleepdeps - remove all sleep dependencies from target clkdm
|
|
* @clkdm: struct clockdomain * to remove all sleep dependencies from
|
|
*
|
|
* Remove all inter-clockdomain sleep dependencies that could prevent
|
|
* @clkdm from idling. Intended to be used during boot to initialize the
|
|
* PRCM to a known state, after all clockdomains are put into swsup idle
|
|
* and woken up. Returns -EINVAL if @clkdm pointer is invalid, or
|
|
* 0 upon success.
|
|
*/
|
|
int clkdm_clear_all_sleepdeps(struct clockdomain *clkdm)
|
|
{
|
|
struct clkdm_dep *cd;
|
|
u32 mask = 0;
|
|
|
|
if (!cpu_is_omap34xx())
|
|
return -EINVAL;
|
|
|
|
if (!clkdm)
|
|
return -EINVAL;
|
|
|
|
for (cd = clkdm->sleepdep_srcs; cd && cd->clkdm_name; cd++) {
|
|
if (!omap_chip_is(cd->omap_chip))
|
|
continue;
|
|
|
|
if (!cd->clkdm && cd->clkdm_name)
|
|
cd->clkdm = _clkdm_lookup(cd->clkdm_name);
|
|
|
|
/* PRM accesses are slow, so minimize them */
|
|
mask |= 1 << cd->clkdm->dep_bit;
|
|
atomic_set(&cd->sleepdep_usecount, 0);
|
|
}
|
|
|
|
omap2_prm_clear_mod_reg_bits(mask, clkdm->pwrdm.ptr->prcm_offs,
|
|
OMAP3430_CM_SLEEPDEP);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap2_clkdm_sleep - force clockdomain sleep transition
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Instruct the CM to force a sleep transition on the specified
|
|
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if
|
|
* clockdomain does not support software-initiated sleep; 0 upon
|
|
* success.
|
|
*/
|
|
int omap2_clkdm_sleep(struct clockdomain *clkdm)
|
|
{
|
|
if (!clkdm)
|
|
return -EINVAL;
|
|
|
|
if (!(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) {
|
|
pr_debug("clockdomain: %s does not support forcing "
|
|
"sleep via software\n", clkdm->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("clockdomain: forcing sleep on %s\n", clkdm->name);
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
|
|
omap2_cm_set_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
|
|
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
|
|
|
|
} else if (cpu_is_omap34xx()) {
|
|
|
|
omap3xxx_cm_clkdm_force_sleep(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
|
|
} else if (cpu_is_omap44xx()) {
|
|
|
|
omap4_cminst_clkdm_force_sleep(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
|
|
} else {
|
|
BUG();
|
|
};
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap2_clkdm_wakeup - force clockdomain wakeup transition
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Instruct the CM to force a wakeup transition on the specified
|
|
* clockdomain @clkdm. Returns -EINVAL if @clkdm is NULL or if the
|
|
* clockdomain does not support software-controlled wakeup; 0 upon
|
|
* success.
|
|
*/
|
|
int omap2_clkdm_wakeup(struct clockdomain *clkdm)
|
|
{
|
|
if (!clkdm)
|
|
return -EINVAL;
|
|
|
|
if (!(clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) {
|
|
pr_debug("clockdomain: %s does not support forcing "
|
|
"wakeup via software\n", clkdm->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pr_debug("clockdomain: forcing wakeup on %s\n", clkdm->name);
|
|
|
|
if (cpu_is_omap24xx()) {
|
|
|
|
omap2_cm_clear_mod_reg_bits(OMAP24XX_FORCESTATE_MASK,
|
|
clkdm->pwrdm.ptr->prcm_offs, OMAP2_PM_PWSTCTRL);
|
|
|
|
} else if (cpu_is_omap34xx()) {
|
|
|
|
omap3xxx_cm_clkdm_force_wakeup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
|
|
} else if (cpu_is_omap44xx()) {
|
|
|
|
omap4_cminst_clkdm_force_wakeup(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
|
|
} else {
|
|
BUG();
|
|
};
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap2_clkdm_allow_idle - enable hwsup idle transitions for clkdm
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Allow the hardware to automatically switch the clockdomain @clkdm into
|
|
* active or idle states, as needed by downstream clocks. If the
|
|
* clockdomain has any downstream clocks enabled in the clock
|
|
* framework, wkdep/sleepdep autodependencies are added; this is so
|
|
* device drivers can read and write to the device. No return value.
|
|
*/
|
|
void omap2_clkdm_allow_idle(struct clockdomain *clkdm)
|
|
{
|
|
if (!clkdm)
|
|
return;
|
|
|
|
if (!(clkdm->flags & CLKDM_CAN_ENABLE_AUTO)) {
|
|
pr_debug("clock: automatic idle transitions cannot be enabled "
|
|
"on clockdomain %s\n", clkdm->name);
|
|
return;
|
|
}
|
|
|
|
pr_debug("clockdomain: enabling automatic idle transitions for %s\n",
|
|
clkdm->name);
|
|
|
|
/*
|
|
* XXX This should be removed once TI adds wakeup/sleep
|
|
* dependency code and data for OMAP4.
|
|
*/
|
|
if (cpu_is_omap44xx()) {
|
|
WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
|
|
"support is not yet implemented\n");
|
|
} else {
|
|
if (atomic_read(&clkdm->usecount) > 0)
|
|
_clkdm_add_autodeps(clkdm);
|
|
}
|
|
|
|
_enable_hwsup(clkdm);
|
|
|
|
pwrdm_clkdm_state_switch(clkdm);
|
|
}
|
|
|
|
/**
|
|
* omap2_clkdm_deny_idle - disable hwsup idle transitions for clkdm
|
|
* @clkdm: struct clockdomain *
|
|
*
|
|
* Prevent the hardware from automatically switching the clockdomain
|
|
* @clkdm into inactive or idle states. If the clockdomain has
|
|
* downstream clocks enabled in the clock framework, wkdep/sleepdep
|
|
* autodependencies are removed. No return value.
|
|
*/
|
|
void omap2_clkdm_deny_idle(struct clockdomain *clkdm)
|
|
{
|
|
if (!clkdm)
|
|
return;
|
|
|
|
if (!(clkdm->flags & CLKDM_CAN_DISABLE_AUTO)) {
|
|
pr_debug("clockdomain: automatic idle transitions cannot be "
|
|
"disabled on %s\n", clkdm->name);
|
|
return;
|
|
}
|
|
|
|
pr_debug("clockdomain: disabling automatic idle transitions for %s\n",
|
|
clkdm->name);
|
|
|
|
_disable_hwsup(clkdm);
|
|
|
|
/*
|
|
* XXX This should be removed once TI adds wakeup/sleep
|
|
* dependency code and data for OMAP4.
|
|
*/
|
|
if (cpu_is_omap44xx()) {
|
|
WARN_ONCE(1, "clockdomain: OMAP4 wakeup/sleep dependency "
|
|
"support is not yet implemented\n");
|
|
} else {
|
|
if (atomic_read(&clkdm->usecount) > 0)
|
|
_clkdm_del_autodeps(clkdm);
|
|
}
|
|
}
|
|
|
|
|
|
/* Clockdomain-to-clock framework interface code */
|
|
|
|
/**
|
|
* omap2_clkdm_clk_enable - add an enabled downstream clock to this clkdm
|
|
* @clkdm: struct clockdomain *
|
|
* @clk: struct clk * of the enabled downstream clock
|
|
*
|
|
* Increment the usecount of the clockdomain @clkdm and ensure that it
|
|
* is awake before @clk is enabled. Intended to be called by
|
|
* clk_enable() code. If the clockdomain is in software-supervised
|
|
* idle mode, force the clockdomain to wake. If the clockdomain is in
|
|
* hardware-supervised idle mode, add clkdm-pwrdm autodependencies, to
|
|
* ensure that devices in the clockdomain can be read from/written to
|
|
* by on-chip processors. Returns -EINVAL if passed null pointers;
|
|
* returns 0 upon success or if the clockdomain is in hwsup idle mode.
|
|
*/
|
|
int omap2_clkdm_clk_enable(struct clockdomain *clkdm, struct clk *clk)
|
|
{
|
|
bool hwsup = false;
|
|
|
|
/*
|
|
* XXX Rewrite this code to maintain a list of enabled
|
|
* downstream clocks for debugging purposes?
|
|
*/
|
|
|
|
if (!clkdm || !clk)
|
|
return -EINVAL;
|
|
|
|
if (atomic_inc_return(&clkdm->usecount) > 1)
|
|
return 0;
|
|
|
|
/* Clockdomain now has one enabled downstream clock */
|
|
|
|
pr_debug("clockdomain: clkdm %s: clk %s now enabled\n", clkdm->name,
|
|
clk->name);
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
|
|
if (!clkdm->clktrctrl_mask)
|
|
return 0;
|
|
|
|
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
|
|
} else if (cpu_is_omap44xx()) {
|
|
|
|
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
|
|
}
|
|
|
|
if (hwsup) {
|
|
/* Disable HW transitions when we are changing deps */
|
|
_disable_hwsup(clkdm);
|
|
_clkdm_add_autodeps(clkdm);
|
|
_enable_hwsup(clkdm);
|
|
} else {
|
|
omap2_clkdm_wakeup(clkdm);
|
|
}
|
|
|
|
pwrdm_wait_transition(clkdm->pwrdm.ptr);
|
|
pwrdm_clkdm_state_switch(clkdm);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* omap2_clkdm_clk_disable - remove an enabled downstream clock from this clkdm
|
|
* @clkdm: struct clockdomain *
|
|
* @clk: struct clk * of the disabled downstream clock
|
|
*
|
|
* Decrement the usecount of this clockdomain @clkdm when @clk is
|
|
* disabled. Intended to be called by clk_disable() code. If the
|
|
* clockdomain usecount goes to 0, put the clockdomain to sleep
|
|
* (software-supervised mode) or remove the clkdm autodependencies
|
|
* (hardware-supervised mode). Returns -EINVAL if passed null
|
|
* pointers; -ERANGE if the @clkdm usecount underflows and debugging
|
|
* is enabled; or returns 0 upon success or if the clockdomain is in
|
|
* hwsup idle mode.
|
|
*/
|
|
int omap2_clkdm_clk_disable(struct clockdomain *clkdm, struct clk *clk)
|
|
{
|
|
bool hwsup = false;
|
|
|
|
/*
|
|
* XXX Rewrite this code to maintain a list of enabled
|
|
* downstream clocks for debugging purposes?
|
|
*/
|
|
|
|
if (!clkdm || !clk)
|
|
return -EINVAL;
|
|
|
|
#ifdef DEBUG
|
|
if (atomic_read(&clkdm->usecount) == 0) {
|
|
WARN_ON(1); /* underflow */
|
|
return -ERANGE;
|
|
}
|
|
#endif
|
|
|
|
if (atomic_dec_return(&clkdm->usecount) > 0)
|
|
return 0;
|
|
|
|
/* All downstream clocks of this clockdomain are now disabled */
|
|
|
|
pr_debug("clockdomain: clkdm %s: clk %s now disabled\n", clkdm->name,
|
|
clk->name);
|
|
|
|
if (cpu_is_omap24xx() || cpu_is_omap34xx()) {
|
|
|
|
if (!clkdm->clktrctrl_mask)
|
|
return 0;
|
|
|
|
hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs,
|
|
clkdm->clktrctrl_mask);
|
|
|
|
} else if (cpu_is_omap44xx()) {
|
|
|
|
hwsup = omap4_cminst_is_clkdm_in_hwsup(clkdm->prcm_partition,
|
|
clkdm->cm_inst,
|
|
clkdm->clkdm_offs);
|
|
|
|
}
|
|
|
|
if (hwsup) {
|
|
/* Disable HW transitions when we are changing deps */
|
|
_disable_hwsup(clkdm);
|
|
_clkdm_del_autodeps(clkdm);
|
|
_enable_hwsup(clkdm);
|
|
} else {
|
|
omap2_clkdm_sleep(clkdm);
|
|
}
|
|
|
|
pwrdm_clkdm_state_switch(clkdm);
|
|
|
|
return 0;
|
|
}
|
|
|