mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 09:02:00 +00:00
33b55a0a7d
Toggle the AI1 mux when changing the CX18_AUDIO_ENABLE register. It's hard to reliably tell when we have written to this register successfully unless we change some bits we know we can read back. The AI mux bits always read back what we wrote to them, so force them to toggle whenever we have to write to the register, so we can tell we wrote to the register successfully. This change was prompted by users experiencing broadcast audio decoding problems after the cx18 module loads for the first time. Signed-off-by: Andy Walls <awalls@radix.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
224 lines
7.1 KiB
C
224 lines
7.1 KiB
C
/*
|
|
* cx18 ADEC firmware functions
|
|
*
|
|
* Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl>
|
|
* Copyright (C) 2008 Andy Walls <awalls@radix.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
|
|
* 02110-1301, USA.
|
|
*/
|
|
|
|
#include "cx18-driver.h"
|
|
#include "cx18-io.h"
|
|
#include <linux/firmware.h>
|
|
|
|
#define CX18_AUDIO_ENABLE 0xc72014
|
|
#define CX18_AI1_MUX_MASK 0x30
|
|
#define CX18_AI1_MUX_I2S1 0x00
|
|
#define CX18_AI1_MUX_I2S2 0x10
|
|
#define CX18_AI1_MUX_843_I2S 0x20
|
|
#define CX18_AI1_MUX_INVALID 0x30
|
|
|
|
#define FWFILE "v4l-cx23418-dig.fw"
|
|
|
|
static int cx18_av_verifyfw(struct cx18 *cx, const struct firmware *fw)
|
|
{
|
|
struct v4l2_subdev *sd = &cx->av_state.sd;
|
|
int ret = 0;
|
|
const u8 *data;
|
|
u32 size;
|
|
int addr;
|
|
u32 expected, dl_control;
|
|
|
|
/* Ensure we put the 8051 in reset and enable firmware upload mode */
|
|
dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
|
|
do {
|
|
dl_control &= 0x00ffffff;
|
|
dl_control |= 0x0f000000;
|
|
cx18_av_write4_noretry(cx, CXADEC_DL_CTL, dl_control);
|
|
dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
|
|
} while ((dl_control & 0xff000000) != 0x0f000000);
|
|
|
|
/* Read and auto increment until at address 0x0000 */
|
|
while (dl_control & 0x3fff)
|
|
dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
|
|
|
|
data = fw->data;
|
|
size = fw->size;
|
|
for (addr = 0; addr < size; addr++) {
|
|
dl_control &= 0xffff3fff; /* ignore top 2 bits of address */
|
|
expected = 0x0f000000 | ((u32)data[addr] << 16) | addr;
|
|
if (expected != dl_control) {
|
|
CX18_ERR_DEV(sd, "verification of %s firmware load "
|
|
"failed: expected %#010x got %#010x\n",
|
|
FWFILE, expected, dl_control);
|
|
ret = -EIO;
|
|
break;
|
|
}
|
|
dl_control = cx18_av_read4(cx, CXADEC_DL_CTL);
|
|
}
|
|
if (ret == 0)
|
|
CX18_INFO_DEV(sd, "verified load of %s firmware (%d bytes)\n",
|
|
FWFILE, size);
|
|
return ret;
|
|
}
|
|
|
|
int cx18_av_loadfw(struct cx18 *cx)
|
|
{
|
|
struct v4l2_subdev *sd = &cx->av_state.sd;
|
|
const struct firmware *fw = NULL;
|
|
u32 size;
|
|
u32 u, v;
|
|
const u8 *ptr;
|
|
int i;
|
|
int retries1 = 0;
|
|
|
|
if (request_firmware(&fw, FWFILE, &cx->pci_dev->dev) != 0) {
|
|
CX18_ERR_DEV(sd, "unable to open firmware %s\n", FWFILE);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The firmware load often has byte errors, so allow for several
|
|
retries, both at byte level and at the firmware load level. */
|
|
while (retries1 < 5) {
|
|
cx18_av_write4_expect(cx, CXADEC_CHIP_CTRL, 0x00010000,
|
|
0x00008430, 0xffffffff); /* cx25843 */
|
|
cx18_av_write_expect(cx, CXADEC_STD_DET_CTL, 0xf6, 0xf6, 0xff);
|
|
|
|
/* Reset the Mako core, Register is alias of CXADEC_CHIP_CTRL */
|
|
cx18_av_write4_expect(cx, 0x8100, 0x00010000,
|
|
0x00008430, 0xffffffff); /* cx25843 */
|
|
|
|
/* Put the 8051 in reset and enable firmware upload */
|
|
cx18_av_write4_noretry(cx, CXADEC_DL_CTL, 0x0F000000);
|
|
|
|
ptr = fw->data;
|
|
size = fw->size;
|
|
|
|
for (i = 0; i < size; i++) {
|
|
u32 dl_control = 0x0F000000 | i | ((u32)ptr[i] << 16);
|
|
u32 value = 0;
|
|
int retries2;
|
|
int unrec_err = 0;
|
|
|
|
for (retries2 = 0; retries2 < CX18_MAX_MMIO_WR_RETRIES;
|
|
retries2++) {
|
|
cx18_av_write4_noretry(cx, CXADEC_DL_CTL,
|
|
dl_control);
|
|
udelay(10);
|
|
value = cx18_av_read4(cx, CXADEC_DL_CTL);
|
|
if (value == dl_control)
|
|
break;
|
|
/* Check if we can correct the byte by changing
|
|
the address. We can only write the lower
|
|
address byte of the address. */
|
|
if ((value & 0x3F00) != (dl_control & 0x3F00)) {
|
|
unrec_err = 1;
|
|
break;
|
|
}
|
|
}
|
|
if (unrec_err || retries2 >= CX18_MAX_MMIO_WR_RETRIES)
|
|
break;
|
|
}
|
|
if (i == size)
|
|
break;
|
|
retries1++;
|
|
}
|
|
if (retries1 >= 5) {
|
|
CX18_ERR_DEV(sd, "unable to load firmware %s\n", FWFILE);
|
|
release_firmware(fw);
|
|
return -EIO;
|
|
}
|
|
|
|
cx18_av_write4_expect(cx, CXADEC_DL_CTL,
|
|
0x03000000 | fw->size, 0x03000000, 0x13000000);
|
|
|
|
CX18_INFO_DEV(sd, "loaded %s firmware (%d bytes)\n", FWFILE, size);
|
|
|
|
if (cx18_av_verifyfw(cx, fw) == 0)
|
|
cx18_av_write4_expect(cx, CXADEC_DL_CTL,
|
|
0x13000000 | fw->size, 0x13000000, 0x13000000);
|
|
|
|
/* Output to the 416 */
|
|
cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x78000);
|
|
|
|
/* Audio input control 1 set to Sony mode */
|
|
/* Audio output input 2 is 0 for slave operation input */
|
|
/* 0xC4000914[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
|
|
/* 0xC4000914[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
|
|
after WS transition for first bit of audio word. */
|
|
cx18_av_write4(cx, CXADEC_I2S_IN_CTL, 0x000000A0);
|
|
|
|
/* Audio output control 1 is set to Sony mode */
|
|
/* Audio output control 2 is set to 1 for master mode */
|
|
/* 0xC4000918[5]: 0 = left sample on WS=0, 1 = left sample on WS=1 */
|
|
/* 0xC4000918[7]: 0 = Philips mode, 1 = Sony mode (1st SCK rising edge
|
|
after WS transition for first bit of audio word. */
|
|
/* 0xC4000918[8]: 0 = slave operation, 1 = master (SCK_OUT and WS_OUT
|
|
are generated) */
|
|
cx18_av_write4(cx, CXADEC_I2S_OUT_CTL, 0x000001A0);
|
|
|
|
/* set alt I2s master clock to /0x16 and enable alt divider i2s
|
|
passthrough */
|
|
cx18_av_write4(cx, CXADEC_PIN_CFG3, 0x5600B687);
|
|
|
|
cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, 0x000000F6, 0x000000F6,
|
|
0x3F00FFFF);
|
|
/* CxDevWrReg(CXADEC_STD_DET_CTL, 0x000000FF); */
|
|
|
|
/* Set bit 0 in register 0x9CC to signify that this is MiniMe. */
|
|
/* Register 0x09CC is defined by the Merlin firmware, and doesn't
|
|
have a name in the spec. */
|
|
cx18_av_write4(cx, 0x09CC, 1);
|
|
|
|
v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
|
|
/* If bit 11 is 1, clear bit 10 */
|
|
if (v & 0x800)
|
|
cx18_write_reg_expect(cx, v & 0xFFFFFBFF, CX18_AUDIO_ENABLE,
|
|
0, 0x400);
|
|
|
|
/* Toggle the AI1 MUX */
|
|
v = cx18_read_reg(cx, CX18_AUDIO_ENABLE);
|
|
u = v & CX18_AI1_MUX_MASK;
|
|
v &= ~CX18_AI1_MUX_MASK;
|
|
if (u == CX18_AI1_MUX_843_I2S || u == CX18_AI1_MUX_INVALID) {
|
|
/* Switch to I2S1 */
|
|
v |= CX18_AI1_MUX_I2S1;
|
|
cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
|
|
v, CX18_AI1_MUX_MASK);
|
|
/* Switch back to the A/V decoder core I2S output */
|
|
v = (v & ~CX18_AI1_MUX_MASK) | CX18_AI1_MUX_843_I2S;
|
|
} else {
|
|
/* Switch to the A/V decoder core I2S output */
|
|
v |= CX18_AI1_MUX_843_I2S;
|
|
cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
|
|
v, CX18_AI1_MUX_MASK);
|
|
/* Switch back to I2S1 or I2S2 */
|
|
v = (v & ~CX18_AI1_MUX_MASK) | u;
|
|
}
|
|
cx18_write_reg_expect(cx, v | 0xb00, CX18_AUDIO_ENABLE,
|
|
v, CX18_AI1_MUX_MASK);
|
|
|
|
/* Enable WW auto audio standard detection */
|
|
v = cx18_av_read4(cx, CXADEC_STD_DET_CTL);
|
|
v |= 0xFF; /* Auto by default */
|
|
v |= 0x400; /* Stereo by default */
|
|
v |= 0x14000000;
|
|
cx18_av_write4_expect(cx, CXADEC_STD_DET_CTL, v, v, 0x3F00FFFF);
|
|
|
|
release_firmware(fw);
|
|
return 0;
|
|
}
|