mirror of
https://github.com/torvalds/linux.git
synced 2024-11-19 18:41:48 +00:00
498153995b
Move the low-level SoC-specific powerdomain control functions into prm*.c. For example, OMAP2xxx low-level powerdomain functions go into prm2xxx.c. Then remove the unnecessary powerdomain*xxx*.c files. The objective is to centralize low-level PRM register accesses into the prm*.[ch] files, and then to export an OMAP SoC-independent API to higher-level OMAP power management code. Signed-off-by: Paul Walmsley <paul@pwsan.com> Cc: Rajendra Nayak <rnayak@ti.com> Cc: Vaibhav Hiremath <hvaibhav@ti.com> Acked-by: Rajendra Nayak <rnayak@ti.com> Reviewed-by: Russ Dill <Russ.Dill@ti.com> Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
569 lines
16 KiB
C
569 lines
16 KiB
C
/*
|
|
* OMAP4 PRM module functions
|
|
*
|
|
* Copyright (C) 2011 Texas Instruments, Inc.
|
|
* Copyright (C) 2010 Nokia Corporation
|
|
* Benoît Cousson
|
|
* Paul Walmsley
|
|
* Rajendra Nayak <rnayak@ti.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
|
|
#include <plat/prcm.h>
|
|
|
|
#include "soc.h"
|
|
#include "iomap.h"
|
|
#include "common.h"
|
|
#include "vp.h"
|
|
#include "prm44xx.h"
|
|
#include "prm-regbits-44xx.h"
|
|
#include "prcm44xx.h"
|
|
#include "prminst44xx.h"
|
|
#include "powerdomain.h"
|
|
|
|
static const struct omap_prcm_irq omap4_prcm_irqs[] = {
|
|
OMAP_PRCM_IRQ("wkup", 0, 0),
|
|
OMAP_PRCM_IRQ("io", 9, 1),
|
|
};
|
|
|
|
static struct omap_prcm_irq_setup omap4_prcm_irq_setup = {
|
|
.ack = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
|
|
.mask = OMAP4_PRM_IRQENABLE_MPU_OFFSET,
|
|
.nr_regs = 2,
|
|
.irqs = omap4_prcm_irqs,
|
|
.nr_irqs = ARRAY_SIZE(omap4_prcm_irqs),
|
|
.irq = 11 + OMAP44XX_IRQ_GIC_START,
|
|
.read_pending_irqs = &omap44xx_prm_read_pending_irqs,
|
|
.ocp_barrier = &omap44xx_prm_ocp_barrier,
|
|
.save_and_clear_irqen = &omap44xx_prm_save_and_clear_irqen,
|
|
.restore_irqen = &omap44xx_prm_restore_irqen,
|
|
};
|
|
|
|
/* PRM low-level functions */
|
|
|
|
/* Read a register in a CM/PRM instance in the PRM module */
|
|
u32 omap4_prm_read_inst_reg(s16 inst, u16 reg)
|
|
{
|
|
return __raw_readl(OMAP44XX_PRM_REGADDR(inst, reg));
|
|
}
|
|
|
|
/* Write into a register in a CM/PRM instance in the PRM module */
|
|
void omap4_prm_write_inst_reg(u32 val, s16 inst, u16 reg)
|
|
{
|
|
__raw_writel(val, OMAP44XX_PRM_REGADDR(inst, reg));
|
|
}
|
|
|
|
/* Read-modify-write a register in a PRM module. Caller must lock */
|
|
u32 omap4_prm_rmw_inst_reg_bits(u32 mask, u32 bits, s16 inst, s16 reg)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prm_read_inst_reg(inst, reg);
|
|
v &= ~mask;
|
|
v |= bits;
|
|
omap4_prm_write_inst_reg(v, inst, reg);
|
|
|
|
return v;
|
|
}
|
|
|
|
/* PRM VP */
|
|
|
|
/*
|
|
* struct omap4_vp - OMAP4 VP register access description.
|
|
* @irqstatus_mpu: offset to IRQSTATUS_MPU register for VP
|
|
* @tranxdone_status: VP_TRANXDONE_ST bitmask in PRM_IRQSTATUS_MPU reg
|
|
*/
|
|
struct omap4_vp {
|
|
u32 irqstatus_mpu;
|
|
u32 tranxdone_status;
|
|
};
|
|
|
|
static struct omap4_vp omap4_vp[] = {
|
|
[OMAP4_VP_VDD_MPU_ID] = {
|
|
.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET,
|
|
.tranxdone_status = OMAP4430_VP_MPU_TRANXDONE_ST_MASK,
|
|
},
|
|
[OMAP4_VP_VDD_IVA_ID] = {
|
|
.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
|
|
.tranxdone_status = OMAP4430_VP_IVA_TRANXDONE_ST_MASK,
|
|
},
|
|
[OMAP4_VP_VDD_CORE_ID] = {
|
|
.irqstatus_mpu = OMAP4_PRM_IRQSTATUS_MPU_OFFSET,
|
|
.tranxdone_status = OMAP4430_VP_CORE_TRANXDONE_ST_MASK,
|
|
},
|
|
};
|
|
|
|
u32 omap4_prm_vp_check_txdone(u8 vp_id)
|
|
{
|
|
struct omap4_vp *vp = &omap4_vp[vp_id];
|
|
u32 irqstatus;
|
|
|
|
irqstatus = omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
|
|
OMAP4430_PRM_OCP_SOCKET_INST,
|
|
vp->irqstatus_mpu);
|
|
return irqstatus & vp->tranxdone_status;
|
|
}
|
|
|
|
void omap4_prm_vp_clear_txdone(u8 vp_id)
|
|
{
|
|
struct omap4_vp *vp = &omap4_vp[vp_id];
|
|
|
|
omap4_prminst_write_inst_reg(vp->tranxdone_status,
|
|
OMAP4430_PRM_PARTITION,
|
|
OMAP4430_PRM_OCP_SOCKET_INST,
|
|
vp->irqstatus_mpu);
|
|
};
|
|
|
|
u32 omap4_prm_vcvp_read(u8 offset)
|
|
{
|
|
return omap4_prminst_read_inst_reg(OMAP4430_PRM_PARTITION,
|
|
OMAP4430_PRM_DEVICE_INST, offset);
|
|
}
|
|
|
|
void omap4_prm_vcvp_write(u32 val, u8 offset)
|
|
{
|
|
omap4_prminst_write_inst_reg(val, OMAP4430_PRM_PARTITION,
|
|
OMAP4430_PRM_DEVICE_INST, offset);
|
|
}
|
|
|
|
u32 omap4_prm_vcvp_rmw(u32 mask, u32 bits, u8 offset)
|
|
{
|
|
return omap4_prminst_rmw_inst_reg_bits(mask, bits,
|
|
OMAP4430_PRM_PARTITION,
|
|
OMAP4430_PRM_DEVICE_INST,
|
|
offset);
|
|
}
|
|
|
|
static inline u32 _read_pending_irq_reg(u16 irqen_offs, u16 irqst_offs)
|
|
{
|
|
u32 mask, st;
|
|
|
|
/* XXX read mask from RAM? */
|
|
mask = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
|
|
irqen_offs);
|
|
st = omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST, irqst_offs);
|
|
|
|
return mask & st;
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_read_pending_irqs - read pending PRM MPU IRQs into @events
|
|
* @events: ptr to two consecutive u32s, preallocated by caller
|
|
*
|
|
* Read PRM_IRQSTATUS_MPU* bits, AND'ed with the currently-enabled PRM
|
|
* MPU IRQs, and store the result into the two u32s pointed to by @events.
|
|
* No return value.
|
|
*/
|
|
void omap44xx_prm_read_pending_irqs(unsigned long *events)
|
|
{
|
|
events[0] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_OFFSET,
|
|
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
|
|
|
|
events[1] = _read_pending_irq_reg(OMAP4_PRM_IRQENABLE_MPU_2_OFFSET,
|
|
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_ocp_barrier - force buffered MPU writes to the PRM to complete
|
|
*
|
|
* Force any buffered writes to the PRM IP block to complete. Needed
|
|
* by the PRM IRQ handler, which reads and writes directly to the IP
|
|
* block, to avoid race conditions after acknowledging or clearing IRQ
|
|
* bits. No return value.
|
|
*/
|
|
void omap44xx_prm_ocp_barrier(void)
|
|
{
|
|
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_REVISION_PRM_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_save_and_clear_irqen - save/clear PRM_IRQENABLE_MPU* regs
|
|
* @saved_mask: ptr to a u32 array to save IRQENABLE bits
|
|
*
|
|
* Save the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers to
|
|
* @saved_mask. @saved_mask must be allocated by the caller.
|
|
* Intended to be used in the PRM interrupt handler suspend callback.
|
|
* The OCP barrier is needed to ensure the write to disable PRM
|
|
* interrupts reaches the PRM before returning; otherwise, spurious
|
|
* interrupts might occur. No return value.
|
|
*/
|
|
void omap44xx_prm_save_and_clear_irqen(u32 *saved_mask)
|
|
{
|
|
saved_mask[0] =
|
|
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQSTATUS_MPU_OFFSET);
|
|
saved_mask[1] =
|
|
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQSTATUS_MPU_2_OFFSET);
|
|
|
|
omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
|
|
omap4_prm_write_inst_reg(0, OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
|
|
|
|
/* OCP barrier */
|
|
omap4_prm_read_inst_reg(OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_REVISION_PRM_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_restore_irqen - set PRM_IRQENABLE_MPU* registers from args
|
|
* @saved_mask: ptr to a u32 array of IRQENABLE bits saved previously
|
|
*
|
|
* Restore the PRM_IRQENABLE_MPU and PRM_IRQENABLE_MPU_2 registers from
|
|
* @saved_mask. Intended to be used in the PRM interrupt handler resume
|
|
* callback to restore values saved by omap44xx_prm_save_and_clear_irqen().
|
|
* No OCP barrier should be needed here; any pending PRM interrupts will fire
|
|
* once the writes reach the PRM. No return value.
|
|
*/
|
|
void omap44xx_prm_restore_irqen(u32 *saved_mask)
|
|
{
|
|
omap4_prm_write_inst_reg(saved_mask[0], OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQENABLE_MPU_OFFSET);
|
|
omap4_prm_write_inst_reg(saved_mask[1], OMAP4430_PRM_OCP_SOCKET_INST,
|
|
OMAP4_PRM_IRQENABLE_MPU_2_OFFSET);
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_reconfigure_io_chain - clear latches and reconfigure I/O chain
|
|
*
|
|
* Clear any previously-latched I/O wakeup events and ensure that the
|
|
* I/O wakeup gates are aligned with the current mux settings. Works
|
|
* by asserting WUCLKIN, waiting for WUCLKOUT to be asserted, and then
|
|
* deasserting WUCLKIN and waiting for WUCLKOUT to be deasserted.
|
|
* No return value. XXX Are the final two steps necessary?
|
|
*/
|
|
void omap44xx_prm_reconfigure_io_chain(void)
|
|
{
|
|
int i = 0;
|
|
|
|
/* Trigger WUCLKIN enable */
|
|
omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK,
|
|
OMAP4430_WUCLK_CTRL_MASK,
|
|
OMAP4430_PRM_DEVICE_INST,
|
|
OMAP4_PRM_IO_PMCTRL_OFFSET);
|
|
omap_test_timeout(
|
|
(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
|
|
OMAP4_PRM_IO_PMCTRL_OFFSET) &
|
|
OMAP4430_WUCLK_STATUS_MASK) >>
|
|
OMAP4430_WUCLK_STATUS_SHIFT) == 1),
|
|
MAX_IOPAD_LATCH_TIME, i);
|
|
if (i == MAX_IOPAD_LATCH_TIME)
|
|
pr_warn("PRM: I/O chain clock line assertion timed out\n");
|
|
|
|
/* Trigger WUCLKIN disable */
|
|
omap4_prm_rmw_inst_reg_bits(OMAP4430_WUCLK_CTRL_MASK, 0x0,
|
|
OMAP4430_PRM_DEVICE_INST,
|
|
OMAP4_PRM_IO_PMCTRL_OFFSET);
|
|
omap_test_timeout(
|
|
(((omap4_prm_read_inst_reg(OMAP4430_PRM_DEVICE_INST,
|
|
OMAP4_PRM_IO_PMCTRL_OFFSET) &
|
|
OMAP4430_WUCLK_STATUS_MASK) >>
|
|
OMAP4430_WUCLK_STATUS_SHIFT) == 0),
|
|
MAX_IOPAD_LATCH_TIME, i);
|
|
if (i == MAX_IOPAD_LATCH_TIME)
|
|
pr_warn("PRM: I/O chain clock line deassertion timed out\n");
|
|
|
|
return;
|
|
}
|
|
|
|
/**
|
|
* omap44xx_prm_enable_io_wakeup - enable wakeup events from I/O wakeup latches
|
|
*
|
|
* Activates the I/O wakeup event latches and allows events logged by
|
|
* those latches to signal a wakeup event to the PRCM. For I/O wakeups
|
|
* to occur, WAKEUPENABLE bits must be set in the pad mux registers, and
|
|
* omap44xx_prm_reconfigure_io_chain() must be called. No return value.
|
|
*/
|
|
static void __init omap44xx_prm_enable_io_wakeup(void)
|
|
{
|
|
omap4_prm_rmw_inst_reg_bits(OMAP4430_GLOBAL_WUEN_MASK,
|
|
OMAP4430_GLOBAL_WUEN_MASK,
|
|
OMAP4430_PRM_DEVICE_INST,
|
|
OMAP4_PRM_IO_PMCTRL_OFFSET);
|
|
}
|
|
|
|
/* Powerdomain low-level functions */
|
|
|
|
static int omap4_pwrdm_set_next_pwrst(struct powerdomain *pwrdm, u8 pwrst)
|
|
{
|
|
omap4_prminst_rmw_inst_reg_bits(OMAP_POWERSTATE_MASK,
|
|
(pwrst << OMAP_POWERSTATE_SHIFT),
|
|
pwrdm->prcm_partition,
|
|
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_next_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
v &= OMAP_POWERSTATE_MASK;
|
|
v >>= OMAP_POWERSTATE_SHIFT;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTST);
|
|
v &= OMAP_POWERSTATEST_MASK;
|
|
v >>= OMAP_POWERSTATEST_SHIFT;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_prev_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTST);
|
|
v &= OMAP4430_LASTPOWERSTATEENTERED_MASK;
|
|
v >>= OMAP4430_LASTPOWERSTATEENTERED_SHIFT;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int omap4_pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm)
|
|
{
|
|
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOWPOWERSTATECHANGE_MASK,
|
|
(1 << OMAP4430_LOWPOWERSTATECHANGE_SHIFT),
|
|
pwrdm->prcm_partition,
|
|
pwrdm->prcm_offs, OMAP4_PM_PWSTCTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_clear_all_prev_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LASTPOWERSTATEENTERED_MASK,
|
|
OMAP4430_LASTPOWERSTATEENTERED_MASK,
|
|
pwrdm->prcm_partition,
|
|
pwrdm->prcm_offs, OMAP4_PM_PWSTST);
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_set_logic_retst(struct powerdomain *pwrdm, u8 pwrst)
|
|
{
|
|
u32 v;
|
|
|
|
v = pwrst << __ffs(OMAP4430_LOGICRETSTATE_MASK);
|
|
omap4_prminst_rmw_inst_reg_bits(OMAP4430_LOGICRETSTATE_MASK, v,
|
|
pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_set_mem_onst(struct powerdomain *pwrdm, u8 bank,
|
|
u8 pwrst)
|
|
{
|
|
u32 m;
|
|
|
|
m = omap2_pwrdm_get_mem_bank_onstate_mask(bank);
|
|
|
|
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
|
|
pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_set_mem_retst(struct powerdomain *pwrdm, u8 bank,
|
|
u8 pwrst)
|
|
{
|
|
u32 m;
|
|
|
|
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
|
|
|
|
omap4_prminst_rmw_inst_reg_bits(m, (pwrst << __ffs(m)),
|
|
pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_logic_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTST);
|
|
v &= OMAP4430_LOGICSTATEST_MASK;
|
|
v >>= OMAP4430_LOGICSTATEST_SHIFT;
|
|
|
|
return v;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_logic_retst(struct powerdomain *pwrdm)
|
|
{
|
|
u32 v;
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
v &= OMAP4430_LOGICRETSTATE_MASK;
|
|
v >>= OMAP4430_LOGICRETSTATE_SHIFT;
|
|
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* omap4_pwrdm_read_prev_logic_pwrst - read the previous logic powerstate
|
|
* @pwrdm: struct powerdomain * to read the state for
|
|
*
|
|
* Reads the previous logic powerstate for a powerdomain. This
|
|
* function must determine the previous logic powerstate by first
|
|
* checking the previous powerstate for the domain. If that was OFF,
|
|
* then logic has been lost. If previous state was RETENTION, the
|
|
* function reads the setting for the next retention logic state to
|
|
* see the actual value. In every other case, the logic is
|
|
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
|
|
* depending whether the logic was retained or not.
|
|
*/
|
|
static int omap4_pwrdm_read_prev_logic_pwrst(struct powerdomain *pwrdm)
|
|
{
|
|
int state;
|
|
|
|
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
|
|
|
|
if (state == PWRDM_POWER_OFF)
|
|
return PWRDM_POWER_OFF;
|
|
|
|
if (state != PWRDM_POWER_RET)
|
|
return PWRDM_POWER_RET;
|
|
|
|
return omap4_pwrdm_read_logic_retst(pwrdm);
|
|
}
|
|
|
|
static int omap4_pwrdm_read_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
u32 m, v;
|
|
|
|
m = omap2_pwrdm_get_mem_bank_stst_mask(bank);
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTST);
|
|
v &= m;
|
|
v >>= __ffs(m);
|
|
|
|
return v;
|
|
}
|
|
|
|
static int omap4_pwrdm_read_mem_retst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
u32 m, v;
|
|
|
|
m = omap2_pwrdm_get_mem_bank_retst_mask(bank);
|
|
|
|
v = omap4_prminst_read_inst_reg(pwrdm->prcm_partition, pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTCTRL);
|
|
v &= m;
|
|
v >>= __ffs(m);
|
|
|
|
return v;
|
|
}
|
|
|
|
/**
|
|
* omap4_pwrdm_read_prev_mem_pwrst - reads the previous memory powerstate
|
|
* @pwrdm: struct powerdomain * to read mem powerstate for
|
|
* @bank: memory bank index
|
|
*
|
|
* Reads the previous memory powerstate for a powerdomain. This
|
|
* function must determine the previous memory powerstate by first
|
|
* checking the previous powerstate for the domain. If that was OFF,
|
|
* then logic has been lost. If previous state was RETENTION, the
|
|
* function reads the setting for the next memory retention state to
|
|
* see the actual value. In every other case, the logic is
|
|
* retained. Returns either PWRDM_POWER_OFF or PWRDM_POWER_RET
|
|
* depending whether logic was retained or not.
|
|
*/
|
|
static int omap4_pwrdm_read_prev_mem_pwrst(struct powerdomain *pwrdm, u8 bank)
|
|
{
|
|
int state;
|
|
|
|
state = omap4_pwrdm_read_prev_pwrst(pwrdm);
|
|
|
|
if (state == PWRDM_POWER_OFF)
|
|
return PWRDM_POWER_OFF;
|
|
|
|
if (state != PWRDM_POWER_RET)
|
|
return PWRDM_POWER_RET;
|
|
|
|
return omap4_pwrdm_read_mem_retst(pwrdm, bank);
|
|
}
|
|
|
|
static int omap4_pwrdm_wait_transition(struct powerdomain *pwrdm)
|
|
{
|
|
u32 c = 0;
|
|
|
|
/*
|
|
* REVISIT: pwrdm_wait_transition() may be better implemented
|
|
* via a callback and a periodic timer check -- how long do we expect
|
|
* powerdomain transitions to take?
|
|
*/
|
|
|
|
/* XXX Is this udelay() value meaningful? */
|
|
while ((omap4_prminst_read_inst_reg(pwrdm->prcm_partition,
|
|
pwrdm->prcm_offs,
|
|
OMAP4_PM_PWSTST) &
|
|
OMAP_INTRANSITION_MASK) &&
|
|
(c++ < PWRDM_TRANSITION_BAILOUT))
|
|
udelay(1);
|
|
|
|
if (c > PWRDM_TRANSITION_BAILOUT) {
|
|
pr_err("powerdomain: %s: waited too long to complete transition\n",
|
|
pwrdm->name);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
pr_debug("powerdomain: completed transition in %d loops\n", c);
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct pwrdm_ops omap4_pwrdm_operations = {
|
|
.pwrdm_set_next_pwrst = omap4_pwrdm_set_next_pwrst,
|
|
.pwrdm_read_next_pwrst = omap4_pwrdm_read_next_pwrst,
|
|
.pwrdm_read_pwrst = omap4_pwrdm_read_pwrst,
|
|
.pwrdm_read_prev_pwrst = omap4_pwrdm_read_prev_pwrst,
|
|
.pwrdm_set_lowpwrstchange = omap4_pwrdm_set_lowpwrstchange,
|
|
.pwrdm_clear_all_prev_pwrst = omap4_pwrdm_clear_all_prev_pwrst,
|
|
.pwrdm_set_logic_retst = omap4_pwrdm_set_logic_retst,
|
|
.pwrdm_read_logic_pwrst = omap4_pwrdm_read_logic_pwrst,
|
|
.pwrdm_read_prev_logic_pwrst = omap4_pwrdm_read_prev_logic_pwrst,
|
|
.pwrdm_read_logic_retst = omap4_pwrdm_read_logic_retst,
|
|
.pwrdm_read_mem_pwrst = omap4_pwrdm_read_mem_pwrst,
|
|
.pwrdm_read_mem_retst = omap4_pwrdm_read_mem_retst,
|
|
.pwrdm_read_prev_mem_pwrst = omap4_pwrdm_read_prev_mem_pwrst,
|
|
.pwrdm_set_mem_onst = omap4_pwrdm_set_mem_onst,
|
|
.pwrdm_set_mem_retst = omap4_pwrdm_set_mem_retst,
|
|
.pwrdm_wait_transition = omap4_pwrdm_wait_transition,
|
|
};
|
|
|
|
|
|
static int __init omap4xxx_prm_init(void)
|
|
{
|
|
if (!cpu_is_omap44xx())
|
|
return 0;
|
|
|
|
omap44xx_prm_enable_io_wakeup();
|
|
|
|
return omap_prcm_register_chain_handler(&omap4_prcm_irq_setup);
|
|
}
|
|
subsys_initcall(omap4xxx_prm_init);
|