mirror of
https://github.com/torvalds/linux.git
synced 2024-11-18 18:11:56 +00:00
1da177e4c3
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
760 lines
27 KiB
Plaintext
760 lines
27 KiB
Plaintext
$Id: INTERFACE,v 1.15.8.2 2001/03/13 16:17:07 kai Exp $
|
|
|
|
Description of the Interface between Linklevel and Hardwarelevel
|
|
of isdn4linux:
|
|
|
|
|
|
The Communication between Linklevel (LL) and Hardwarelevel (HL)
|
|
is based on the struct isdn_if (defined in isdnif.h).
|
|
|
|
An HL-driver can register itself at LL by calling the function
|
|
register_isdn() with a pointer to that struct. Prior to that, it has
|
|
to preset some of the fields of isdn_if. The LL sets the rest of
|
|
the fields. All further communication is done via callbacks using
|
|
the function-pointers defined in isdn_if.
|
|
|
|
Changes/Version numbering:
|
|
|
|
During development of the ISDN subsystem, several changes have been
|
|
made to the interface. Before it went into kernel, the package
|
|
had a unique version number. The last version, distributed separately
|
|
was 0.7.4. When the subsystem went into kernel, every functional unit
|
|
got a separate version number. These numbers are shown at initialization,
|
|
separated by slashes:
|
|
|
|
c.c/t.t/n.n/p.p/a.a/v.v
|
|
|
|
where
|
|
|
|
c.c is the revision of the common code.
|
|
t.t is the revision of the tty related code.
|
|
n.n is the revision of the network related code.
|
|
p.p is the revision of the ppp related code.
|
|
a.a is the revision of the audio related code.
|
|
v.v is the revision of the V.110 related code.
|
|
|
|
Changes in this document are marked with '***CHANGEx' where x representing
|
|
the version number. If that number starts with 0, it refers to the old,
|
|
separately distributed package. If it starts with one of the letters
|
|
above, it refers to the revision of the corresponding module.
|
|
***CHANGEIx refers to the revision number of the isdnif.h
|
|
|
|
1. Description of the fields of isdn_if:
|
|
|
|
int channels;
|
|
|
|
This field has to be set by the HL-driver to the number of channels
|
|
supported prior to calling register_isdn(). Upon return of the call,
|
|
the LL puts an id there, which has to be used by the HL-driver when
|
|
invoking the other callbacks.
|
|
|
|
int maxbufsize;
|
|
|
|
***CHANGE0.6: New since this version.
|
|
|
|
Also to be preset by the HL-driver. With this value the HL-driver
|
|
tells the LL the maximum size of a data-packet it will accept.
|
|
|
|
unsigned long features;
|
|
|
|
To be preset by the HL-driver. Using this field, the HL-driver
|
|
announces the features supported. At the moment this is limited to
|
|
report the supported layer2 and layer3-protocols. For setting this
|
|
field the constants ISDN_FEATURE..., declared in isdnif.h have to be
|
|
used.
|
|
|
|
***CHANGE0.7.1: The line type (1TR6, EDSS1) has to be set.
|
|
|
|
unsigned short hl_hdrlen;
|
|
|
|
***CHANGE0.7.4: New field.
|
|
|
|
To be preset by the HL-driver, if it supports sk_buff's. The driver
|
|
should put here the amount of additional space needed in sk_buff's for
|
|
its internal purposes. Drivers not supporting sk_buff's should
|
|
initialize this field to 0.
|
|
|
|
void (*rcvcallb_skb)(int, int, struct sk_buff *)
|
|
|
|
***CHANGE0.7.4: New field.
|
|
|
|
This field will be set by LL. The HL-driver delivers received data-
|
|
packets by calling this function. Upon calling, the HL-driver must
|
|
already have its private data pulled off the head of the sk_buff.
|
|
|
|
Parameter:
|
|
int driver-Id
|
|
int Channel-number locally to the driver. (starting with 0)
|
|
struct sk_buff * Pointer to sk_buff, containing received data.
|
|
|
|
int (*statcallb)(isdn_ctrl*);
|
|
|
|
This field will be set by LL. This function has to be called by the
|
|
HL-driver for signaling status-changes or other events to the LL.
|
|
|
|
Parameter:
|
|
isdn_ctrl*
|
|
|
|
The struct isdn_ctrl also defined in isdn_if. The exact meanings of its
|
|
fields are described together with the descriptions of the possible
|
|
events. Here is only a short description of the fields:
|
|
|
|
driver = driver Id.
|
|
command = event-type. (one of the constants ISDN_STAT_...)
|
|
arg = depends on event-type.
|
|
num = depends on event-type.
|
|
|
|
Returnvalue:
|
|
0 on success, else -1
|
|
|
|
int (*command)(isdn_ctrl*);
|
|
|
|
This field has to be preset by the HL-driver. It points to a function,
|
|
to be called by LL to perform functions like dialing, B-channel
|
|
setup, etc. The exact meaning of the parameters is described with the
|
|
descriptions of the possible commands.
|
|
|
|
Parameter:
|
|
isdn_ctrl*
|
|
driver = driver-Id
|
|
command = command to perform. (one of the constants ISDN_CMD_...)
|
|
arg = depends on command.
|
|
num = depends on command.
|
|
|
|
Returnvalue:
|
|
>=0 on success, else error-code (-ENODEV etc.)
|
|
|
|
int (*writebuf_skb)(int, int, int, struct sk_buff *)
|
|
|
|
***CHANGE0.7.4: New field.
|
|
***CHANGEI.1.21: New field.
|
|
|
|
This field has to be preset by the HL-driver. The given function will
|
|
be called by the LL for delivering data to be send via B-Channel.
|
|
|
|
|
|
Parameter:
|
|
int driver-Id ***CHANGE0.7.4: New parameter.
|
|
int channel-number locally to the HL-driver. (starts with 0)
|
|
int ack ***ChangeI1.21: New parameter
|
|
If this is !0, the driver has to signal the delivery
|
|
by sending an ISDN_STAT_BSENT. If this is 0, the driver
|
|
MUST NOT send an ISDN_STAT_BSENT.
|
|
struct sk_buff * Pointer to sk_buff containing data to be send via
|
|
B-channel.
|
|
|
|
Returnvalue:
|
|
Length of data accepted on success, else error-code (-EINVAL on
|
|
oversized packets etc.)
|
|
|
|
int (*writecmd)(u_char*, int, int, int, int);
|
|
|
|
This field has to be preset by the HL-driver. The given function will be
|
|
called to perform write-requests on /dev/isdnctrl (i.e. sending commands
|
|
to the card) The data-format is hardware-specific. This function is
|
|
intended for debugging only. It is not necessary for normal operation
|
|
and never will be called by the tty-emulation- or network-code. If
|
|
this function is not supported, the driver has to set NULL here.
|
|
|
|
Parameter:
|
|
u_char* pointer to data.
|
|
int length of data.
|
|
int flag: 0 = call from within kernel-space. (HL-driver must use
|
|
memcpy, may NOT use schedule())
|
|
1 = call from user-space. (HL-driver must use
|
|
memcpy_fromfs, use of schedule() allowed)
|
|
int driver-Id.
|
|
int channel-number locally to the HL-driver. (starts with 0)
|
|
|
|
***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
|
|
|
|
Returnvalue:
|
|
Length of data accepted on success, else error-code (-EINVAL etc.)
|
|
|
|
int (*readstat)(u_char*, int, int, int, int);
|
|
|
|
This field has to be preset by the HL-driver. The given function will be
|
|
called to perform read-requests on /dev/isdnctrl (i.e. reading replies
|
|
from the card) The data-format is hardware-specific. This function is
|
|
intended for debugging only. It is not necessary for normal operation
|
|
and never will be called by the tty-emulation- or network-code. If
|
|
this function is not supported, the driver has to set NULL here.
|
|
|
|
Parameter:
|
|
u_char* pointer to data.
|
|
int length of data.
|
|
int flag: 0 = call from within kernel-space. (HL-driver must use
|
|
memcpy, may NOT use schedule())
|
|
1 = call from user-space. (HL-driver must use
|
|
memcpy_fromfs, use of schedule() allowed)
|
|
int driver-Id.
|
|
int channel-number locally to the HL-driver. (starts with 0)
|
|
|
|
***CHANGEI1.14: The driver-Id and channel-number are new since this revision.
|
|
|
|
Returnvalue:
|
|
Length of data on success, else error-code (-EINVAL etc.)
|
|
|
|
char id[20];
|
|
***CHANGE0.7: New since this version.
|
|
|
|
This string has to be preset by the HL-driver. Its purpose is for
|
|
identification of the driver by the user. Eg.: it is shown in the
|
|
status-info of /dev/isdninfo. Furthermore it is used as Id for binding
|
|
net-interfaces to a specific channel. If a string of length zero is
|
|
given, upon return, isdn4linux will replace it by a generic name. (line0,
|
|
line1 etc.) It is recommended to make this string configurable during
|
|
module-load-time. (copy a global variable to this string.) For doing that,
|
|
modules 1.2.8 or newer are necessary.
|
|
|
|
2. Description of the commands, a HL-driver has to support:
|
|
|
|
All commands will be performed by calling the function command() described
|
|
above from within the LL. The field command of the struct-parameter will
|
|
contain the desired command, the field driver is always set to the
|
|
appropriate driver-Id.
|
|
|
|
Until now, the following commands are defined:
|
|
|
|
***CHANGEI1.34: The parameter "num" has been replaced by a union "parm" containing
|
|
the old "num" and a new setup_type struct used for ISDN_CMD_DIAL
|
|
and ISDN_STAT_ICALL callback.
|
|
|
|
ISDN_CMD_IOCTL:
|
|
|
|
This command is intended for performing ioctl-calls for configuring
|
|
hardware or similar purposes (setting port-addresses, loading firmware
|
|
etc.) For this purpose, in the LL all ioctl-calls with an argument
|
|
>= IIOCDRVCTL (0x100) will be handed transparently to this
|
|
function after subtracting 0x100 and placing the result in arg.
|
|
Example:
|
|
If a userlevel-program calls ioctl(0x101,...) the function gets
|
|
called with the field command set to 1.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_IOCTL
|
|
arg = Original ioctl-cmd - IIOCDRVCTL
|
|
parm.num = first bytes filled with (unsigned long)arg
|
|
|
|
Returnvalue:
|
|
Depending on driver.
|
|
|
|
|
|
ISDN_CMD_DIAL:
|
|
|
|
This command is used to tell the HL-driver it should dial a given
|
|
number.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_DIAL
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
|
|
parm.setup.phone = An ASCII-String containing the number to dial.
|
|
parm.setup.eazmsn = An ASCII-Sting containing the own EAZ or MSN.
|
|
parm.setup.si1 = The Service-Indicator.
|
|
parm.setup.si2 = Additional Service-Indicator.
|
|
|
|
If the Line has been designed as SPV (a special german
|
|
feature, meaning semi-leased-line) the phone has to
|
|
start with an "S".
|
|
***CHANGE0.6: In previous versions the EAZ has been given in the
|
|
highbyte of arg.
|
|
***CHANGE0.7.1: New since this version: ServiceIndicator and AddInfo.
|
|
|
|
ISDN_CMD_ACCEPTD:
|
|
|
|
With this command, the HL-driver is told to accept a D-Channel-setup.
|
|
(Response to an incoming call)
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_ACCEPTD
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_CMD_ACCEPTB:
|
|
|
|
With this command, the HL-driver is told to perform a B-Channel-setup.
|
|
(after establishing D-Channel-Connection)
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_ACCEPTB
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_CMD_HANGUP:
|
|
|
|
With this command, the HL-driver is told to hangup (B-Channel if
|
|
established first, then D-Channel). This command is also used for
|
|
actively rejecting an incoming call.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_HANGUP
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_CMD_CLREAZ:
|
|
|
|
With this command, the HL-driver is told not to signal incoming
|
|
calls to the LL.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_CLREAZ
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_CMD_SETEAZ:
|
|
|
|
With this command, the HL-driver is told to signal incoming calls for
|
|
the given EAZs/MSNs to the LL.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_SETEAZ
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm.num = ASCII-String, containing the desired EAZ's/MSN's
|
|
(comma-separated). If an empty String is given, the
|
|
HL-driver should respond to ALL incoming calls,
|
|
regardless of the destination-address.
|
|
***CHANGE0.6: New since this version the "empty-string"-feature.
|
|
|
|
ISDN_CMD_GETEAZ: (currently unused)
|
|
|
|
With this command, the HL-driver is told to report the current setting
|
|
given with ISDN_CMD_SETEAZ.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_GETEAZ
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm.num = ASCII-String, containing the current EAZ's/MSN's
|
|
|
|
ISDN_CMD_SETSIL: (currently unused)
|
|
|
|
With this command, the HL-driver is told to signal only incoming
|
|
calls with the given Service-Indicators.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_SETSIL
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm.num = ASCII-String, containing the desired Service-Indicators.
|
|
|
|
ISDN_CMD_GETSIL: (currently unused)
|
|
|
|
With this command, the HL-driver is told to return the current
|
|
Service-Indicators it will respond to.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_SETSIL
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm.num = ASCII-String, containing the current Service-Indicators.
|
|
|
|
ISDN_CMD_SETL2:
|
|
|
|
With this command, the HL-driver is told to select the given Layer-2-
|
|
protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or
|
|
ISDN_CMD_ACCEPTD.
|
|
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_SETL2
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
logical or'ed with (protocol-Id << 8)
|
|
protocol-Id is one of the constants ISDN_PROTO_L2...
|
|
parm = unused.
|
|
|
|
ISDN_CMD_GETL2: (currently unused)
|
|
|
|
With this command, the HL-driver is told to return the current
|
|
setting of the Layer-2-protocol.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_GETL2
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
Returnvalue:
|
|
current protocol-Id (one of the constants ISDN_L2_PROTO)
|
|
|
|
ISDN_CMD_SETL3:
|
|
|
|
With this command, the HL-driver is told to select the given Layer-3-
|
|
protocol. This command is issued by the LL prior to ISDN_CMD_DIAL or
|
|
ISDN_CMD_ACCEPTD.
|
|
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_SETL3
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
logical or'ed with (protocol-Id << 8)
|
|
protocol-Id is one of the constants ISDN_PROTO_L3...
|
|
parm.fax = Pointer to T30_s fax struct. (fax usage only)
|
|
|
|
ISDN_CMD_GETL2: (currently unused)
|
|
|
|
With this command, the HL-driver is told to return the current
|
|
setting of the Layer-3-protocol.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_GETL3
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
Returnvalue:
|
|
current protocol-Id (one of the constants ISDN_L3_PROTO)
|
|
|
|
ISDN_CMD_PROCEED:
|
|
|
|
With this command, the HL-driver is told to proceed with a incoming call.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_PROCEED
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
setup.eazmsn= empty string or string send as uus1 in DSS1 with
|
|
PROCEED message
|
|
|
|
ISDN_CMD_ALERT:
|
|
|
|
With this command, the HL-driver is told to alert a proceeding call.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_ALERT
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
setup.eazmsn= empty string or string send as uus1 in DSS1 with
|
|
ALERT message
|
|
|
|
ISDN_CMD_REDIR:
|
|
|
|
With this command, the HL-driver is told to redirect a call in proceeding
|
|
or alerting state.
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_REDIR
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
setup.eazmsn= empty string or string send as uus1 in DSS1 protocol
|
|
setup.screen= screening indicator
|
|
setup.phone = redirected to party number
|
|
|
|
ISDN_CMD_PROT_IO:
|
|
|
|
With this call, the LL-driver invokes protocol specific features through
|
|
the LL.
|
|
The call is not implicitely bound to a connection.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_CMD_PROT_IO
|
|
arg = The lower 8 Bits define the addressed protocol as defined
|
|
in ISDN_PTYPE..., the upper bits are used to differentiate
|
|
the protocol specific CMD.
|
|
|
|
para = protocol and function specific. See isdnif.h for detail.
|
|
|
|
|
|
ISDN_CMD_FAXCMD:
|
|
|
|
With this command the HL-driver receives a fax sub-command.
|
|
For details refer to INTERFACE.fax
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_CMD_FAXCMD
|
|
arg = channel-number locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
|
|
3. Description of the events to be signaled by the HL-driver to the LL.
|
|
|
|
All status-changes are signaled via calling the previously described
|
|
function statcallb(). The field command of the struct isdn_cmd has
|
|
to be set by the HL-driver with the appropriate Status-Id (event-number).
|
|
The field arg has to be set to the channel-number (locally to the driver,
|
|
starting with 0) to which this event applies. (Exception: STAVAIL-event)
|
|
|
|
Until now, the following Status-Ids are defined:
|
|
|
|
ISDN_STAT_AVAIL:
|
|
|
|
With this call, the HL-driver signals the availability of new data
|
|
for readstat(). Used only for debugging-purposes, see description
|
|
of readstat().
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_STAVAIL
|
|
arg = length of available data.
|
|
parm = unused.
|
|
|
|
ISDN_STAT_ICALL:
|
|
ISDN_STAT_ICALLW:
|
|
|
|
With this call, the HL-driver signals an incoming call to the LL.
|
|
If ICALLW is signalled the incoming call is a waiting call without
|
|
a available B-chan.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_ICALL
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
para.setup.phone = Callernumber.
|
|
para.setup.eazmsn = CalledNumber.
|
|
para.setup.si1 = Service Indicator.
|
|
para.setup.si2 = Additional Service Indicator.
|
|
para.setup.plan = octet 3 from Calling party number Information Element.
|
|
para.setup.screen = octet 3a from Calling party number Information Element.
|
|
|
|
Return:
|
|
0 = No device matching this call.
|
|
1 = At least one device matching this call (RING on ttyI).
|
|
HL-driver may send ALERTING on the D-channel in this case.
|
|
2 = Call will be rejected.
|
|
3 = Incoming called party number is currently incomplete.
|
|
Additional digits are required.
|
|
Used for signalling with PtP connections.
|
|
4 = Call will be held in a proceeding state
|
|
(HL driver sends PROCEEDING)
|
|
Used when a user space prog needs time to interpret a call
|
|
para.setup.eazmsn may be filled with an uus1 message of
|
|
30 octets maximum. Empty string if no uus.
|
|
5 = Call will be actively deflected to another party
|
|
Only available in DSS1/EURO protocol
|
|
para.setup.phone must be set to destination party number
|
|
para.setup.eazmsn may be filled with an uus1 message of
|
|
30 octets maximum. Empty string if no uus.
|
|
-1 = An error happened. (Invalid parameters for example.)
|
|
The keypad support now is included in the dial command.
|
|
|
|
|
|
ISDN_STAT_RUN:
|
|
|
|
With this call, the HL-driver signals availability of the ISDN-card.
|
|
(after initializing, loading firmware)
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_RUN
|
|
arg = unused.
|
|
parm = unused.
|
|
|
|
ISDN_STAT_STOP:
|
|
|
|
With this call, the HL-driver signals unavailability of the ISDN-card.
|
|
(before unloading, while resetting/reconfiguring the card)
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_STOP
|
|
arg = unused.
|
|
parm = unused.
|
|
|
|
ISDN_STAT_DCONN:
|
|
|
|
With this call, the HL-driver signals the successful establishment of
|
|
a D-Channel-connection. (Response to ISDN_CMD_ACCEPTD or ISDN_CMD_DIAL)
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_DCONN
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_STAT_BCONN:
|
|
|
|
With this call, the HL-driver signals the successful establishment of
|
|
a B-Channel-connection. (Response to ISDN_CMD_ACCEPTB or because the
|
|
remote-station has initiated establishment)
|
|
|
|
The HL driver should call this when the logical l2/l3 protocol
|
|
connection on top of the physical B-channel is established.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_BCONN
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.num = ASCII-String, containing type of connection (for analog
|
|
modem only). This will be appended to the CONNECT message
|
|
e.g. 14400/V.32bis
|
|
|
|
ISDN_STAT_DHUP:
|
|
|
|
With this call, the HL-driver signals the shutdown of a
|
|
D-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP,
|
|
or caused by a remote-hangup or if the remote-station has actively
|
|
rejected a call.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_DHUP
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_STAT_BHUP:
|
|
|
|
With this call, the HL-driver signals the shutdown of a
|
|
B-Channel-connection. This could be a response to a prior ISDN_CMD_HANGUP,
|
|
or caused by a remote-hangup.
|
|
|
|
The HL driver should call this as soon as the logical l2/l3 protocol
|
|
connection on top of the physical B-channel is released.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_BHUP
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_STAT_CINF:
|
|
|
|
With this call, the HL-driver delivers charge-unit information to the
|
|
LL.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_CINF
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.num = ASCII string containing charge-units (digits only).
|
|
|
|
ISDN_STAT_LOAD: (currently unused)
|
|
|
|
ISDN_STAT_UNLOAD:
|
|
|
|
With this call, the HL-driver signals that it will be unloaded now. This
|
|
tells the LL to release all corresponding data-structures.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_UNLOAD
|
|
arg = unused.
|
|
parm = unused.
|
|
|
|
ISDN_STAT_BSENT:
|
|
|
|
With this call the HL-driver signals the delivery of a data-packet.
|
|
This callback is used by the network-interfaces only, tty-Emulation
|
|
does not need this call.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_BSENT
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.length = ***CHANGEI.1.21: New field.
|
|
the driver has to set this to the original length
|
|
of the skb at the time of receiving it from the linklevel.
|
|
|
|
ISDN_STAT_NODCH:
|
|
|
|
With this call, the driver has to respond to a prior ISDN_CMD_DIAL, if
|
|
no D-Channel is available.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_NODCH
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|
|
ISDN_STAT_ADDCH:
|
|
|
|
This call is for HL-drivers, which are unable to check card-type
|
|
or numbers of supported channels before they have loaded any firmware
|
|
using ioctl. Those HL-driver simply set the channel-parameter to a
|
|
minimum channel-number when registering, and later if they know
|
|
the real amount, perform this call, allocating additional channels.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_ADDCH
|
|
arg = number of channels to be added.
|
|
parm = unused.
|
|
|
|
ISDN_STAT_CAUSE:
|
|
|
|
With this call, the HL-driver delivers CAUSE-messages to the LL.
|
|
Currently the LL does not use this messages. Their contents is simply
|
|
logged via kernel-messages. Therefore, currently the format of the
|
|
messages is completely free. However they should be printable.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_NODCH
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.num = ASCII string containing CAUSE-message.
|
|
|
|
ISDN_STAT_DISPLAY:
|
|
|
|
With this call, the HL-driver delivers DISPLAY-messages to the LL.
|
|
Currently the LL does not use this messages.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_DISPLAY
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
para.display= string containing DISPLAY-message.
|
|
|
|
ISDN_STAT_PROT:
|
|
|
|
With this call, the HL-driver delivers protocol specific infos to the LL.
|
|
The call is not implicitely bound to a connection.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_PROT
|
|
arg = The lower 8 Bits define the addressed protocol as defined
|
|
in ISDN_PTYPE..., the upper bits are used to differentiate
|
|
the protocol specific STAT.
|
|
|
|
para = protocol and function specific. See isdnif.h for detail.
|
|
|
|
ISDN_STAT_DISCH:
|
|
|
|
With this call, the HL-driver signals the LL to disable or enable the
|
|
use of supplied channel and driver.
|
|
The call may be used to reduce the available number of B-channels after
|
|
loading the driver. The LL has to ignore a disabled channel when searching
|
|
for free channels. The HL driver itself never delivers STAT callbacks for
|
|
disabled channels.
|
|
The LL returns a nonzero code if the operation was not successful or the
|
|
selected channel is actually regarded as busy.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_DISCH
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.num[0] = 0 if channel shall be disabled, else enabled.
|
|
|
|
ISDN_STAT_L1ERR:
|
|
|
|
***CHANGEI1.21 new status message.
|
|
A signal can be sent to the linklevel if an Layer1-error results in
|
|
packet-loss on receive or send. The field errcode of the cmd.parm
|
|
union describes the error more precisely.
|
|
|
|
Parameter:
|
|
driver = driver-Id
|
|
command = ISDN_STAT_L1ERR
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm.errcode= ISDN_STAT_L1ERR_SEND: Packet lost while sending.
|
|
ISDN_STAT_L1ERR_RECV: Packet lost while receiving.
|
|
ISDN_STAT_FAXIND:
|
|
|
|
With this call the HL-driver signals a fax sub-command to the LL.
|
|
For details refer to INTERFACE.fax
|
|
|
|
Parameter:
|
|
driver = driver-Id.
|
|
command = ISDN_STAT_FAXIND
|
|
arg = channel-number, locally to the driver. (starting with 0)
|
|
parm = unused.
|
|
|