mirror of
https://github.com/torvalds/linux.git
synced 2024-11-12 07:01:57 +00:00
16846ebeff
Freescale i.MX7D soc contains a new ADC IP. This patch add this ADC driver support, and the driver only support ADC software trigger. Signed-off-by: Haibo Chen <haibo.chen@freescale.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
610 lines
16 KiB
C
610 lines
16 KiB
C
/*
|
|
* Freescale i.MX7D ADC driver
|
|
*
|
|
* Copyright (C) 2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/completion.h>
|
|
#include <linux/err.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/driver.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
/* ADC register */
|
|
#define IMX7D_REG_ADC_CH_A_CFG1 0x00
|
|
#define IMX7D_REG_ADC_CH_A_CFG2 0x10
|
|
#define IMX7D_REG_ADC_CH_B_CFG1 0x20
|
|
#define IMX7D_REG_ADC_CH_B_CFG2 0x30
|
|
#define IMX7D_REG_ADC_CH_C_CFG1 0x40
|
|
#define IMX7D_REG_ADC_CH_C_CFG2 0x50
|
|
#define IMX7D_REG_ADC_CH_D_CFG1 0x60
|
|
#define IMX7D_REG_ADC_CH_D_CFG2 0x70
|
|
#define IMX7D_REG_ADC_CH_SW_CFG 0x80
|
|
#define IMX7D_REG_ADC_TIMER_UNIT 0x90
|
|
#define IMX7D_REG_ADC_DMA_FIFO 0xa0
|
|
#define IMX7D_REG_ADC_FIFO_STATUS 0xb0
|
|
#define IMX7D_REG_ADC_INT_SIG_EN 0xc0
|
|
#define IMX7D_REG_ADC_INT_EN 0xd0
|
|
#define IMX7D_REG_ADC_INT_STATUS 0xe0
|
|
#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0
|
|
#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100
|
|
#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110
|
|
#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120
|
|
#define IMX7D_REG_ADC_ADC_CFG 0x130
|
|
|
|
#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10
|
|
#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20
|
|
|
|
#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31)
|
|
#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30)
|
|
#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29)
|
|
#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24)
|
|
|
|
#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12)
|
|
#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12)
|
|
#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12)
|
|
#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12)
|
|
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29)
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29)
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29)
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29)
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29)
|
|
#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29)
|
|
|
|
#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31)
|
|
#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1)
|
|
#define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0)
|
|
|
|
#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8)
|
|
#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9)
|
|
#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10)
|
|
#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11)
|
|
#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN \
|
|
(IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \
|
|
IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \
|
|
IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \
|
|
IMX7D_REG_ADC_INT_CHD_COV_INT_EN)
|
|
#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00
|
|
#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000
|
|
|
|
#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100)
|
|
|
|
enum imx7d_adc_clk_pre_div {
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_8,
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_16,
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_32,
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_64,
|
|
IMX7D_ADC_ANALOG_CLK_PRE_DIV_128,
|
|
};
|
|
|
|
enum imx7d_adc_average_num {
|
|
IMX7D_ADC_AVERAGE_NUM_4,
|
|
IMX7D_ADC_AVERAGE_NUM_8,
|
|
IMX7D_ADC_AVERAGE_NUM_16,
|
|
IMX7D_ADC_AVERAGE_NUM_32,
|
|
};
|
|
|
|
struct imx7d_adc_feature {
|
|
enum imx7d_adc_clk_pre_div clk_pre_div;
|
|
enum imx7d_adc_average_num avg_num;
|
|
|
|
u32 core_time_unit; /* impact the sample rate */
|
|
|
|
bool average_en;
|
|
};
|
|
|
|
struct imx7d_adc {
|
|
struct device *dev;
|
|
void __iomem *regs;
|
|
struct clk *clk;
|
|
|
|
u32 vref_uv;
|
|
u32 value;
|
|
u32 channel;
|
|
u32 pre_div_num;
|
|
|
|
struct regulator *vref;
|
|
struct imx7d_adc_feature adc_feature;
|
|
|
|
struct completion completion;
|
|
};
|
|
|
|
struct imx7d_adc_analogue_core_clk {
|
|
u32 pre_div;
|
|
u32 reg_config;
|
|
};
|
|
|
|
#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \
|
|
.pre_div = (_pre_div), \
|
|
.reg_config = (_reg_conf), \
|
|
}
|
|
|
|
static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = {
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4),
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8),
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16),
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32),
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64),
|
|
IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128),
|
|
};
|
|
|
|
#define IMX7D_ADC_CHAN(_idx) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.channel = (_idx), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ), \
|
|
}
|
|
|
|
static const struct iio_chan_spec imx7d_adc_iio_channels[] = {
|
|
IMX7D_ADC_CHAN(0),
|
|
IMX7D_ADC_CHAN(1),
|
|
IMX7D_ADC_CHAN(2),
|
|
IMX7D_ADC_CHAN(3),
|
|
IMX7D_ADC_CHAN(4),
|
|
IMX7D_ADC_CHAN(5),
|
|
IMX7D_ADC_CHAN(6),
|
|
IMX7D_ADC_CHAN(7),
|
|
IMX7D_ADC_CHAN(8),
|
|
IMX7D_ADC_CHAN(9),
|
|
IMX7D_ADC_CHAN(10),
|
|
IMX7D_ADC_CHAN(11),
|
|
IMX7D_ADC_CHAN(12),
|
|
IMX7D_ADC_CHAN(13),
|
|
IMX7D_ADC_CHAN(14),
|
|
IMX7D_ADC_CHAN(15),
|
|
};
|
|
|
|
static const u32 imx7d_adc_average_num[] = {
|
|
IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4,
|
|
IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8,
|
|
IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16,
|
|
IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32,
|
|
};
|
|
|
|
static void imx7d_adc_feature_config(struct imx7d_adc *info)
|
|
{
|
|
info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
|
|
info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
|
|
info->adc_feature.core_time_unit = 1;
|
|
info->adc_feature.average_en = true;
|
|
}
|
|
|
|
static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
|
|
{
|
|
struct imx7d_adc_feature *adc_feature = &info->adc_feature;
|
|
struct imx7d_adc_analogue_core_clk adc_analogure_clk;
|
|
u32 i;
|
|
u32 tmp_cfg1;
|
|
u32 sample_rate = 0;
|
|
|
|
/*
|
|
* Before sample set, disable channel A,B,C,D. Here we
|
|
* clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1.
|
|
*/
|
|
for (i = 0; i < 4; i++) {
|
|
tmp_cfg1 =
|
|
readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
|
|
tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN;
|
|
writel(tmp_cfg1,
|
|
info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
|
|
}
|
|
|
|
adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div];
|
|
sample_rate |= adc_analogure_clk.reg_config;
|
|
info->pre_div_num = adc_analogure_clk.pre_div;
|
|
|
|
sample_rate |= adc_feature->core_time_unit;
|
|
writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT);
|
|
}
|
|
|
|
static void imx7d_adc_hw_init(struct imx7d_adc *info)
|
|
{
|
|
u32 cfg;
|
|
|
|
/* power up and enable adc analogue core */
|
|
cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
|
|
cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
|
|
IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN);
|
|
cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN;
|
|
writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
|
|
|
|
/* enable channel A,B,C,D interrupt */
|
|
writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
|
|
info->regs + IMX7D_REG_ADC_INT_SIG_EN);
|
|
writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN,
|
|
info->regs + IMX7D_REG_ADC_INT_EN);
|
|
|
|
imx7d_adc_sample_rate_set(info);
|
|
}
|
|
|
|
static void imx7d_adc_channel_set(struct imx7d_adc *info)
|
|
{
|
|
u32 cfg1 = 0;
|
|
u32 cfg2;
|
|
u32 channel;
|
|
|
|
channel = info->channel;
|
|
|
|
/* the channel choose single conversion, and enable average mode */
|
|
cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
|
|
IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
|
|
if (info->adc_feature.average_en)
|
|
cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
|
|
|
|
/*
|
|
* physical channel 0 chose logical channel A
|
|
* physical channel 1 chose logical channel B
|
|
* physical channel 2 chose logical channel C
|
|
* physical channel 3 chose logical channel D
|
|
*/
|
|
cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel);
|
|
|
|
/*
|
|
* read register REG_ADC_CH_A\B\C\D_CFG2, according to the
|
|
* channel chosen
|
|
*/
|
|
cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
|
|
IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
|
|
|
|
cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num];
|
|
|
|
/*
|
|
* write the register REG_ADC_CH_A\B\C\D_CFG2, according to
|
|
* the channel chosen
|
|
*/
|
|
writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel +
|
|
IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
|
|
writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel);
|
|
}
|
|
|
|
static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
|
|
{
|
|
/* input clock is always 24MHz */
|
|
u32 input_clk = 24000000;
|
|
u32 analogue_core_clk;
|
|
u32 core_time_unit = info->adc_feature.core_time_unit;
|
|
u32 tmp;
|
|
|
|
analogue_core_clk = input_clk / info->pre_div_num;
|
|
tmp = (core_time_unit + 1) * 6;
|
|
|
|
return analogue_core_clk / tmp;
|
|
}
|
|
|
|
static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long mask)
|
|
{
|
|
struct imx7d_adc *info = iio_priv(indio_dev);
|
|
|
|
u32 channel;
|
|
long ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
mutex_lock(&indio_dev->mlock);
|
|
reinit_completion(&info->completion);
|
|
|
|
channel = chan->channel & 0x03;
|
|
info->channel = channel;
|
|
imx7d_adc_channel_set(info);
|
|
|
|
ret = wait_for_completion_interruptible_timeout
|
|
(&info->completion, IMX7D_ADC_TIMEOUT);
|
|
if (ret == 0) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return -ETIMEDOUT;
|
|
}
|
|
if (ret < 0) {
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return ret;
|
|
}
|
|
|
|
*val = info->value;
|
|
mutex_unlock(&indio_dev->mlock);
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
info->vref_uv = regulator_get_voltage(info->vref);
|
|
*val = info->vref_uv / 1000;
|
|
*val2 = 12;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
*val = imx7d_adc_get_sample_rate(info);
|
|
return IIO_VAL_INT;
|
|
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int imx7d_adc_read_data(struct imx7d_adc *info)
|
|
{
|
|
u32 channel;
|
|
u32 value;
|
|
|
|
channel = info->channel & 0x03;
|
|
|
|
/*
|
|
* channel A and B conversion result share one register,
|
|
* bit[27~16] is the channel B conversion result,
|
|
* bit[11~0] is the channel A conversion result.
|
|
* channel C and D is the same.
|
|
*/
|
|
if (channel < 2)
|
|
value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT);
|
|
else
|
|
value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT);
|
|
if (channel & 0x1) /* channel B or D */
|
|
value = (value >> 16) & 0xFFF;
|
|
else /* channel A or C */
|
|
value &= 0xFFF;
|
|
|
|
return value;
|
|
}
|
|
|
|
static irqreturn_t imx7d_adc_isr(int irq, void *dev_id)
|
|
{
|
|
struct imx7d_adc *info = (struct imx7d_adc *)dev_id;
|
|
int status;
|
|
|
|
status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS);
|
|
if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) {
|
|
info->value = imx7d_adc_read_data(info);
|
|
complete(&info->completion);
|
|
|
|
/*
|
|
* The register IMX7D_REG_ADC_INT_STATUS can't clear
|
|
* itself after read operation, need software to write
|
|
* 0 to the related bit. Here we clear the channel A/B/C/D
|
|
* conversion finished flag.
|
|
*/
|
|
status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS;
|
|
writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
|
|
}
|
|
|
|
/*
|
|
* If the channel A/B/C/D conversion timeout, report it and clear these
|
|
* timeout flags.
|
|
*/
|
|
if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) {
|
|
pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n",
|
|
dev_name(info->dev), status);
|
|
status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT;
|
|
writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int imx7d_adc_reg_access(struct iio_dev *indio_dev,
|
|
unsigned reg, unsigned writeval,
|
|
unsigned *readval)
|
|
{
|
|
struct imx7d_adc *info = iio_priv(indio_dev);
|
|
|
|
if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG)
|
|
return -EINVAL;
|
|
|
|
*readval = readl(info->regs + reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct iio_info imx7d_adc_iio_info = {
|
|
.driver_module = THIS_MODULE,
|
|
.read_raw = &imx7d_adc_read_raw,
|
|
.debugfs_reg_access = &imx7d_adc_reg_access,
|
|
};
|
|
|
|
static const struct of_device_id imx7d_adc_match[] = {
|
|
{ .compatible = "fsl,imx7d-adc", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx7d_adc_match);
|
|
|
|
static void imx7d_adc_power_down(struct imx7d_adc *info)
|
|
{
|
|
u32 adc_cfg;
|
|
|
|
adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
|
|
adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
|
|
IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN;
|
|
adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN;
|
|
writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
|
|
}
|
|
|
|
static int imx7d_adc_probe(struct platform_device *pdev)
|
|
{
|
|
struct imx7d_adc *info;
|
|
struct iio_dev *indio_dev;
|
|
struct resource *mem;
|
|
int irq;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
|
|
if (!indio_dev) {
|
|
dev_err(&pdev->dev, "Failed allocating iio device\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
info = iio_priv(indio_dev);
|
|
info->dev = &pdev->dev;
|
|
|
|
mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
info->regs = devm_ioremap_resource(&pdev->dev, mem);
|
|
if (IS_ERR(info->regs)) {
|
|
ret = PTR_ERR(info->regs);
|
|
dev_err(&pdev->dev,
|
|
"Failed to remap adc memory, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
irq = platform_get_irq(pdev, 0);
|
|
if (irq < 0) {
|
|
dev_err(&pdev->dev, "No irq resource?\n");
|
|
return irq;
|
|
}
|
|
|
|
info->clk = devm_clk_get(&pdev->dev, "adc");
|
|
if (IS_ERR(info->clk)) {
|
|
ret = PTR_ERR(info->clk);
|
|
dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
info->vref = devm_regulator_get(&pdev->dev, "vref");
|
|
if (IS_ERR(info->vref)) {
|
|
ret = PTR_ERR(info->vref);
|
|
dev_err(&pdev->dev,
|
|
"Failed getting reference voltage, err = %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = regulator_enable(info->vref);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Can't enable adc reference top voltage, err = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
init_completion(&info->completion);
|
|
|
|
indio_dev->name = dev_name(&pdev->dev);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->info = &imx7d_adc_iio_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = imx7d_adc_iio_channels;
|
|
indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret) {
|
|
dev_err(&pdev->dev,
|
|
"Could not prepare or enable the clock.\n");
|
|
goto error_adc_clk_enable;
|
|
}
|
|
|
|
ret = devm_request_irq(info->dev, irq,
|
|
imx7d_adc_isr, 0,
|
|
dev_name(&pdev->dev), info);
|
|
if (ret < 0) {
|
|
dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq);
|
|
goto error_iio_device_register;
|
|
}
|
|
|
|
imx7d_adc_feature_config(info);
|
|
imx7d_adc_hw_init(info);
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
imx7d_adc_power_down(info);
|
|
dev_err(&pdev->dev, "Couldn't register the device.\n");
|
|
goto error_iio_device_register;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_iio_device_register:
|
|
clk_disable_unprepare(info->clk);
|
|
error_adc_clk_enable:
|
|
regulator_disable(info->vref);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx7d_adc_remove(struct platform_device *pdev)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct imx7d_adc *info = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
|
|
imx7d_adc_power_down(info);
|
|
|
|
clk_disable_unprepare(info->clk);
|
|
regulator_disable(info->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx7d_adc_suspend(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct imx7d_adc *info = iio_priv(indio_dev);
|
|
|
|
imx7d_adc_power_down(info);
|
|
|
|
clk_disable_unprepare(info->clk);
|
|
regulator_disable(info->vref);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx7d_adc_resume(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct imx7d_adc *info = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
ret = regulator_enable(info->vref);
|
|
if (ret) {
|
|
dev_err(info->dev,
|
|
"Can't enable adc reference top voltage, err = %d\n",
|
|
ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(info->clk);
|
|
if (ret) {
|
|
dev_err(info->dev,
|
|
"Could not prepare or enable clock.\n");
|
|
regulator_disable(info->vref);
|
|
return ret;
|
|
}
|
|
|
|
imx7d_adc_hw_init(info);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume);
|
|
|
|
static struct platform_driver imx7d_adc_driver = {
|
|
.probe = imx7d_adc_probe,
|
|
.remove = imx7d_adc_remove,
|
|
.driver = {
|
|
.name = "imx7d_adc",
|
|
.of_match_table = imx7d_adc_match,
|
|
.pm = &imx7d_adc_pm_ops,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(imx7d_adc_driver);
|
|
|
|
MODULE_AUTHOR("Haibo Chen <haibo.chen@freescale.com>");
|
|
MODULE_DESCRIPTION("Freeacale IMX7D ADC driver");
|
|
MODULE_LICENSE("GPL v2");
|