mirror of
https://github.com/torvalds/linux.git
synced 2024-11-16 17:12:06 +00:00
06675e6f4f
The tc35815-mac platform device used a pci bus number and a devfn to identify its target device, but the pci bus number may vary if some bus-bridges are found. Use irq number which is be unique for embedded controllers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2993 lines
88 KiB
C
2993 lines
88 KiB
C
/*
|
|
* tc35815.c: A TOSHIBA TC35815CF PCI 10/100Mbps ethernet driver for linux.
|
|
*
|
|
* Based on skelton.c by Donald Becker.
|
|
*
|
|
* This driver is a replacement of older and less maintained version.
|
|
* This is a header of the older version:
|
|
* -----<snip>-----
|
|
* Copyright 2001 MontaVista Software Inc.
|
|
* Author: MontaVista Software, Inc.
|
|
* ahennessy@mvista.com
|
|
* Copyright (C) 2000-2001 Toshiba Corporation
|
|
* static const char *version =
|
|
* "tc35815.c:v0.00 26/07/2000 by Toshiba Corporation\n";
|
|
* -----<snip>-----
|
|
*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* (C) Copyright TOSHIBA CORPORATION 2004-2005
|
|
* All Rights Reserved.
|
|
*/
|
|
|
|
#ifdef TC35815_NAPI
|
|
#define DRV_VERSION "1.36-NAPI"
|
|
#else
|
|
#define DRV_VERSION "1.36"
|
|
#endif
|
|
static const char *version = "tc35815.c:v" DRV_VERSION "\n";
|
|
#define MODNAME "tc35815"
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/in.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/string.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/platform_device.h>
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
|
|
/* First, a few definitions that the brave might change. */
|
|
|
|
#define GATHER_TXINT /* On-Demand Tx Interrupt */
|
|
#define WORKAROUND_LOSTCAR
|
|
#define WORKAROUND_100HALF_PROMISC
|
|
/* #define TC35815_USE_PACKEDBUFFER */
|
|
|
|
typedef enum {
|
|
TC35815CF = 0,
|
|
TC35815_NWU,
|
|
TC35815_TX4939,
|
|
} board_t;
|
|
|
|
/* indexed by board_t, above */
|
|
static const struct {
|
|
const char *name;
|
|
} board_info[] __devinitdata = {
|
|
{ "TOSHIBA TC35815CF 10/100BaseTX" },
|
|
{ "TOSHIBA TC35815 with Wake on LAN" },
|
|
{ "TOSHIBA TC35815/TX4939" },
|
|
};
|
|
|
|
static const struct pci_device_id tc35815_pci_tbl[] = {
|
|
{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815CF), .driver_data = TC35815CF },
|
|
{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_NWU), .driver_data = TC35815_NWU },
|
|
{PCI_DEVICE(PCI_VENDOR_ID_TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC35815_TX4939), .driver_data = TC35815_TX4939 },
|
|
{0,}
|
|
};
|
|
MODULE_DEVICE_TABLE (pci, tc35815_pci_tbl);
|
|
|
|
/* see MODULE_PARM_DESC */
|
|
static struct tc35815_options {
|
|
int speed;
|
|
int duplex;
|
|
int doforce;
|
|
} options;
|
|
|
|
/*
|
|
* Registers
|
|
*/
|
|
struct tc35815_regs {
|
|
volatile __u32 DMA_Ctl; /* 0x00 */
|
|
volatile __u32 TxFrmPtr;
|
|
volatile __u32 TxThrsh;
|
|
volatile __u32 TxPollCtr;
|
|
volatile __u32 BLFrmPtr;
|
|
volatile __u32 RxFragSize;
|
|
volatile __u32 Int_En;
|
|
volatile __u32 FDA_Bas;
|
|
volatile __u32 FDA_Lim; /* 0x20 */
|
|
volatile __u32 Int_Src;
|
|
volatile __u32 unused0[2];
|
|
volatile __u32 PauseCnt;
|
|
volatile __u32 RemPauCnt;
|
|
volatile __u32 TxCtlFrmStat;
|
|
volatile __u32 unused1;
|
|
volatile __u32 MAC_Ctl; /* 0x40 */
|
|
volatile __u32 CAM_Ctl;
|
|
volatile __u32 Tx_Ctl;
|
|
volatile __u32 Tx_Stat;
|
|
volatile __u32 Rx_Ctl;
|
|
volatile __u32 Rx_Stat;
|
|
volatile __u32 MD_Data;
|
|
volatile __u32 MD_CA;
|
|
volatile __u32 CAM_Adr; /* 0x60 */
|
|
volatile __u32 CAM_Data;
|
|
volatile __u32 CAM_Ena;
|
|
volatile __u32 PROM_Ctl;
|
|
volatile __u32 PROM_Data;
|
|
volatile __u32 Algn_Cnt;
|
|
volatile __u32 CRC_Cnt;
|
|
volatile __u32 Miss_Cnt;
|
|
};
|
|
|
|
/*
|
|
* Bit assignments
|
|
*/
|
|
/* DMA_Ctl bit asign ------------------------------------------------------- */
|
|
#define DMA_RxAlign 0x00c00000 /* 1:Reception Alignment */
|
|
#define DMA_RxAlign_1 0x00400000
|
|
#define DMA_RxAlign_2 0x00800000
|
|
#define DMA_RxAlign_3 0x00c00000
|
|
#define DMA_M66EnStat 0x00080000 /* 1:66MHz Enable State */
|
|
#define DMA_IntMask 0x00040000 /* 1:Interupt mask */
|
|
#define DMA_SWIntReq 0x00020000 /* 1:Software Interrupt request */
|
|
#define DMA_TxWakeUp 0x00010000 /* 1:Transmit Wake Up */
|
|
#define DMA_RxBigE 0x00008000 /* 1:Receive Big Endian */
|
|
#define DMA_TxBigE 0x00004000 /* 1:Transmit Big Endian */
|
|
#define DMA_TestMode 0x00002000 /* 1:Test Mode */
|
|
#define DMA_PowrMgmnt 0x00001000 /* 1:Power Management */
|
|
#define DMA_DmBurst_Mask 0x000001fc /* DMA Burst size */
|
|
|
|
/* RxFragSize bit asign ---------------------------------------------------- */
|
|
#define RxFrag_EnPack 0x00008000 /* 1:Enable Packing */
|
|
#define RxFrag_MinFragMask 0x00000ffc /* Minimum Fragment */
|
|
|
|
/* MAC_Ctl bit asign ------------------------------------------------------- */
|
|
#define MAC_Link10 0x00008000 /* 1:Link Status 10Mbits */
|
|
#define MAC_EnMissRoll 0x00002000 /* 1:Enable Missed Roll */
|
|
#define MAC_MissRoll 0x00000400 /* 1:Missed Roll */
|
|
#define MAC_Loop10 0x00000080 /* 1:Loop 10 Mbps */
|
|
#define MAC_Conn_Auto 0x00000000 /*00:Connection mode (Automatic) */
|
|
#define MAC_Conn_10M 0x00000020 /*01: (10Mbps endec)*/
|
|
#define MAC_Conn_Mll 0x00000040 /*10: (Mll clock) */
|
|
#define MAC_MacLoop 0x00000010 /* 1:MAC Loopback */
|
|
#define MAC_FullDup 0x00000008 /* 1:Full Duplex 0:Half Duplex */
|
|
#define MAC_Reset 0x00000004 /* 1:Software Reset */
|
|
#define MAC_HaltImm 0x00000002 /* 1:Halt Immediate */
|
|
#define MAC_HaltReq 0x00000001 /* 1:Halt request */
|
|
|
|
/* PROM_Ctl bit asign ------------------------------------------------------ */
|
|
#define PROM_Busy 0x00008000 /* 1:Busy (Start Operation) */
|
|
#define PROM_Read 0x00004000 /*10:Read operation */
|
|
#define PROM_Write 0x00002000 /*01:Write operation */
|
|
#define PROM_Erase 0x00006000 /*11:Erase operation */
|
|
/*00:Enable or Disable Writting, */
|
|
/* as specified in PROM_Addr. */
|
|
#define PROM_Addr_Ena 0x00000030 /*11xxxx:PROM Write enable */
|
|
/*00xxxx: disable */
|
|
|
|
/* CAM_Ctl bit asign ------------------------------------------------------- */
|
|
#define CAM_CompEn 0x00000010 /* 1:CAM Compare Enable */
|
|
#define CAM_NegCAM 0x00000008 /* 1:Reject packets CAM recognizes,*/
|
|
/* accept other */
|
|
#define CAM_BroadAcc 0x00000004 /* 1:Broadcast assept */
|
|
#define CAM_GroupAcc 0x00000002 /* 1:Multicast assept */
|
|
#define CAM_StationAcc 0x00000001 /* 1:unicast accept */
|
|
|
|
/* CAM_Ena bit asign ------------------------------------------------------- */
|
|
#define CAM_ENTRY_MAX 21 /* CAM Data entry max count */
|
|
#define CAM_Ena_Mask ((1<<CAM_ENTRY_MAX)-1) /* CAM Enable bits (Max 21bits) */
|
|
#define CAM_Ena_Bit(index) (1<<(index))
|
|
#define CAM_ENTRY_DESTINATION 0
|
|
#define CAM_ENTRY_SOURCE 1
|
|
#define CAM_ENTRY_MACCTL 20
|
|
|
|
/* Tx_Ctl bit asign -------------------------------------------------------- */
|
|
#define Tx_En 0x00000001 /* 1:Transmit enable */
|
|
#define Tx_TxHalt 0x00000002 /* 1:Transmit Halt Request */
|
|
#define Tx_NoPad 0x00000004 /* 1:Suppress Padding */
|
|
#define Tx_NoCRC 0x00000008 /* 1:Suppress Padding */
|
|
#define Tx_FBack 0x00000010 /* 1:Fast Back-off */
|
|
#define Tx_EnUnder 0x00000100 /* 1:Enable Underrun */
|
|
#define Tx_EnExDefer 0x00000200 /* 1:Enable Excessive Deferral */
|
|
#define Tx_EnLCarr 0x00000400 /* 1:Enable Lost Carrier */
|
|
#define Tx_EnExColl 0x00000800 /* 1:Enable Excessive Collision */
|
|
#define Tx_EnLateColl 0x00001000 /* 1:Enable Late Collision */
|
|
#define Tx_EnTxPar 0x00002000 /* 1:Enable Transmit Parity */
|
|
#define Tx_EnComp 0x00004000 /* 1:Enable Completion */
|
|
|
|
/* Tx_Stat bit asign ------------------------------------------------------- */
|
|
#define Tx_TxColl_MASK 0x0000000F /* Tx Collision Count */
|
|
#define Tx_ExColl 0x00000010 /* Excessive Collision */
|
|
#define Tx_TXDefer 0x00000020 /* Transmit Defered */
|
|
#define Tx_Paused 0x00000040 /* Transmit Paused */
|
|
#define Tx_IntTx 0x00000080 /* Interrupt on Tx */
|
|
#define Tx_Under 0x00000100 /* Underrun */
|
|
#define Tx_Defer 0x00000200 /* Deferral */
|
|
#define Tx_NCarr 0x00000400 /* No Carrier */
|
|
#define Tx_10Stat 0x00000800 /* 10Mbps Status */
|
|
#define Tx_LateColl 0x00001000 /* Late Collision */
|
|
#define Tx_TxPar 0x00002000 /* Tx Parity Error */
|
|
#define Tx_Comp 0x00004000 /* Completion */
|
|
#define Tx_Halted 0x00008000 /* Tx Halted */
|
|
#define Tx_SQErr 0x00010000 /* Signal Quality Error(SQE) */
|
|
|
|
/* Rx_Ctl bit asign -------------------------------------------------------- */
|
|
#define Rx_EnGood 0x00004000 /* 1:Enable Good */
|
|
#define Rx_EnRxPar 0x00002000 /* 1:Enable Receive Parity */
|
|
#define Rx_EnLongErr 0x00000800 /* 1:Enable Long Error */
|
|
#define Rx_EnOver 0x00000400 /* 1:Enable OverFlow */
|
|
#define Rx_EnCRCErr 0x00000200 /* 1:Enable CRC Error */
|
|
#define Rx_EnAlign 0x00000100 /* 1:Enable Alignment */
|
|
#define Rx_IgnoreCRC 0x00000040 /* 1:Ignore CRC Value */
|
|
#define Rx_StripCRC 0x00000010 /* 1:Strip CRC Value */
|
|
#define Rx_ShortEn 0x00000008 /* 1:Short Enable */
|
|
#define Rx_LongEn 0x00000004 /* 1:Long Enable */
|
|
#define Rx_RxHalt 0x00000002 /* 1:Receive Halt Request */
|
|
#define Rx_RxEn 0x00000001 /* 1:Receive Intrrupt Enable */
|
|
|
|
/* Rx_Stat bit asign ------------------------------------------------------- */
|
|
#define Rx_Halted 0x00008000 /* Rx Halted */
|
|
#define Rx_Good 0x00004000 /* Rx Good */
|
|
#define Rx_RxPar 0x00002000 /* Rx Parity Error */
|
|
/* 0x00001000 not use */
|
|
#define Rx_LongErr 0x00000800 /* Rx Long Error */
|
|
#define Rx_Over 0x00000400 /* Rx Overflow */
|
|
#define Rx_CRCErr 0x00000200 /* Rx CRC Error */
|
|
#define Rx_Align 0x00000100 /* Rx Alignment Error */
|
|
#define Rx_10Stat 0x00000080 /* Rx 10Mbps Status */
|
|
#define Rx_IntRx 0x00000040 /* Rx Interrupt */
|
|
#define Rx_CtlRecd 0x00000020 /* Rx Control Receive */
|
|
|
|
#define Rx_Stat_Mask 0x0000EFC0 /* Rx All Status Mask */
|
|
|
|
/* Int_En bit asign -------------------------------------------------------- */
|
|
#define Int_NRAbtEn 0x00000800 /* 1:Non-recoverable Abort Enable */
|
|
#define Int_TxCtlCmpEn 0x00000400 /* 1:Transmit Control Complete Enable */
|
|
#define Int_DmParErrEn 0x00000200 /* 1:DMA Parity Error Enable */
|
|
#define Int_DParDEn 0x00000100 /* 1:Data Parity Error Enable */
|
|
#define Int_EarNotEn 0x00000080 /* 1:Early Notify Enable */
|
|
#define Int_DParErrEn 0x00000040 /* 1:Detected Parity Error Enable */
|
|
#define Int_SSysErrEn 0x00000020 /* 1:Signalled System Error Enable */
|
|
#define Int_RMasAbtEn 0x00000010 /* 1:Received Master Abort Enable */
|
|
#define Int_RTargAbtEn 0x00000008 /* 1:Received Target Abort Enable */
|
|
#define Int_STargAbtEn 0x00000004 /* 1:Signalled Target Abort Enable */
|
|
#define Int_BLExEn 0x00000002 /* 1:Buffer List Exhausted Enable */
|
|
#define Int_FDAExEn 0x00000001 /* 1:Free Descriptor Area */
|
|
/* Exhausted Enable */
|
|
|
|
/* Int_Src bit asign ------------------------------------------------------- */
|
|
#define Int_NRabt 0x00004000 /* 1:Non Recoverable error */
|
|
#define Int_DmParErrStat 0x00002000 /* 1:DMA Parity Error & Clear */
|
|
#define Int_BLEx 0x00001000 /* 1:Buffer List Empty & Clear */
|
|
#define Int_FDAEx 0x00000800 /* 1:FDA Empty & Clear */
|
|
#define Int_IntNRAbt 0x00000400 /* 1:Non Recoverable Abort */
|
|
#define Int_IntCmp 0x00000200 /* 1:MAC control packet complete */
|
|
#define Int_IntExBD 0x00000100 /* 1:Interrupt Extra BD & Clear */
|
|
#define Int_DmParErr 0x00000080 /* 1:DMA Parity Error & Clear */
|
|
#define Int_IntEarNot 0x00000040 /* 1:Receive Data write & Clear */
|
|
#define Int_SWInt 0x00000020 /* 1:Software request & Clear */
|
|
#define Int_IntBLEx 0x00000010 /* 1:Buffer List Empty & Clear */
|
|
#define Int_IntFDAEx 0x00000008 /* 1:FDA Empty & Clear */
|
|
#define Int_IntPCI 0x00000004 /* 1:PCI controller & Clear */
|
|
#define Int_IntMacRx 0x00000002 /* 1:Rx controller & Clear */
|
|
#define Int_IntMacTx 0x00000001 /* 1:Tx controller & Clear */
|
|
|
|
/* MD_CA bit asign --------------------------------------------------------- */
|
|
#define MD_CA_PreSup 0x00001000 /* 1:Preamble Supress */
|
|
#define MD_CA_Busy 0x00000800 /* 1:Busy (Start Operation) */
|
|
#define MD_CA_Wr 0x00000400 /* 1:Write 0:Read */
|
|
|
|
|
|
/*
|
|
* Descriptors
|
|
*/
|
|
|
|
/* Frame descripter */
|
|
struct FDesc {
|
|
volatile __u32 FDNext;
|
|
volatile __u32 FDSystem;
|
|
volatile __u32 FDStat;
|
|
volatile __u32 FDCtl;
|
|
};
|
|
|
|
/* Buffer descripter */
|
|
struct BDesc {
|
|
volatile __u32 BuffData;
|
|
volatile __u32 BDCtl;
|
|
};
|
|
|
|
#define FD_ALIGN 16
|
|
|
|
/* Frame Descripter bit asign ---------------------------------------------- */
|
|
#define FD_FDLength_MASK 0x0000FFFF /* Length MASK */
|
|
#define FD_BDCnt_MASK 0x001F0000 /* BD count MASK in FD */
|
|
#define FD_FrmOpt_MASK 0x7C000000 /* Frame option MASK */
|
|
#define FD_FrmOpt_BigEndian 0x40000000 /* Tx/Rx */
|
|
#define FD_FrmOpt_IntTx 0x20000000 /* Tx only */
|
|
#define FD_FrmOpt_NoCRC 0x10000000 /* Tx only */
|
|
#define FD_FrmOpt_NoPadding 0x08000000 /* Tx only */
|
|
#define FD_FrmOpt_Packing 0x04000000 /* Rx only */
|
|
#define FD_CownsFD 0x80000000 /* FD Controller owner bit */
|
|
#define FD_Next_EOL 0x00000001 /* FD EOL indicator */
|
|
#define FD_BDCnt_SHIFT 16
|
|
|
|
/* Buffer Descripter bit asign --------------------------------------------- */
|
|
#define BD_BuffLength_MASK 0x0000FFFF /* Recieve Data Size */
|
|
#define BD_RxBDID_MASK 0x00FF0000 /* BD ID Number MASK */
|
|
#define BD_RxBDSeqN_MASK 0x7F000000 /* Rx BD Sequence Number */
|
|
#define BD_CownsBD 0x80000000 /* BD Controller owner bit */
|
|
#define BD_RxBDID_SHIFT 16
|
|
#define BD_RxBDSeqN_SHIFT 24
|
|
|
|
|
|
/* Some useful constants. */
|
|
#undef NO_CHECK_CARRIER /* Does not check No-Carrier with TP */
|
|
|
|
#ifdef NO_CHECK_CARRIER
|
|
#define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
|
|
Tx_EnExColl | Tx_EnExDefer | Tx_EnUnder | \
|
|
Tx_En) /* maybe 0x7b01 */
|
|
#else
|
|
#define TX_CTL_CMD (Tx_EnComp | Tx_EnTxPar | Tx_EnLateColl | \
|
|
Tx_EnExColl | Tx_EnLCarr | Tx_EnExDefer | Tx_EnUnder | \
|
|
Tx_En) /* maybe 0x7b01 */
|
|
#endif
|
|
#define RX_CTL_CMD (Rx_EnGood | Rx_EnRxPar | Rx_EnLongErr | Rx_EnOver \
|
|
| Rx_EnCRCErr | Rx_EnAlign | Rx_RxEn) /* maybe 0x6f01 */
|
|
#define INT_EN_CMD (Int_NRAbtEn | \
|
|
Int_DmParErrEn | Int_DParDEn | Int_DParErrEn | \
|
|
Int_SSysErrEn | Int_RMasAbtEn | Int_RTargAbtEn | \
|
|
Int_STargAbtEn | \
|
|
Int_BLExEn | Int_FDAExEn) /* maybe 0xb7f*/
|
|
#define DMA_CTL_CMD DMA_BURST_SIZE
|
|
#define HAVE_DMA_RXALIGN(lp) likely((lp)->boardtype != TC35815CF)
|
|
|
|
/* Tuning parameters */
|
|
#define DMA_BURST_SIZE 32
|
|
#define TX_THRESHOLD 1024
|
|
#define TX_THRESHOLD_MAX 1536 /* used threshold with packet max byte for low pci transfer ability.*/
|
|
#define TX_THRESHOLD_KEEP_LIMIT 10 /* setting threshold max value when overrun error occured this count. */
|
|
|
|
/* 16 + RX_BUF_NUM * 8 + RX_FD_NUM * 16 + TX_FD_NUM * 32 <= PAGE_SIZE*FD_PAGE_NUM */
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
#define FD_PAGE_NUM 2
|
|
#define RX_BUF_NUM 8 /* >= 2 */
|
|
#define RX_FD_NUM 250 /* >= 32 */
|
|
#define TX_FD_NUM 128
|
|
#define RX_BUF_SIZE PAGE_SIZE
|
|
#else /* TC35815_USE_PACKEDBUFFER */
|
|
#define FD_PAGE_NUM 4
|
|
#define RX_BUF_NUM 128 /* < 256 */
|
|
#define RX_FD_NUM 256 /* >= 32 */
|
|
#define TX_FD_NUM 128
|
|
#if RX_CTL_CMD & Rx_LongEn
|
|
#define RX_BUF_SIZE PAGE_SIZE
|
|
#elif RX_CTL_CMD & Rx_StripCRC
|
|
#define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 4 + 2, 32) /* +2: reserve */
|
|
#else
|
|
#define RX_BUF_SIZE ALIGN(ETH_FRAME_LEN + 2, 32) /* +2: reserve */
|
|
#endif
|
|
#endif /* TC35815_USE_PACKEDBUFFER */
|
|
#define RX_FD_RESERVE (2 / 2) /* max 2 BD per RxFD */
|
|
#define NAPI_WEIGHT 16
|
|
|
|
struct TxFD {
|
|
struct FDesc fd;
|
|
struct BDesc bd;
|
|
struct BDesc unused;
|
|
};
|
|
|
|
struct RxFD {
|
|
struct FDesc fd;
|
|
struct BDesc bd[0]; /* variable length */
|
|
};
|
|
|
|
struct FrFD {
|
|
struct FDesc fd;
|
|
struct BDesc bd[RX_BUF_NUM];
|
|
};
|
|
|
|
|
|
#define tc_readl(addr) readl(addr)
|
|
#define tc_writel(d, addr) writel(d, addr)
|
|
|
|
#define TC35815_TX_TIMEOUT msecs_to_jiffies(400)
|
|
|
|
/* Timer state engine. */
|
|
enum tc35815_timer_state {
|
|
arbwait = 0, /* Waiting for auto negotiation to complete. */
|
|
lupwait = 1, /* Auto-neg complete, awaiting link-up status. */
|
|
ltrywait = 2, /* Forcing try of all modes, from fastest to slowest. */
|
|
asleep = 3, /* Time inactive. */
|
|
lcheck = 4, /* Check link status. */
|
|
};
|
|
|
|
/* Information that need to be kept for each board. */
|
|
struct tc35815_local {
|
|
struct pci_dev *pci_dev;
|
|
|
|
struct net_device *dev;
|
|
struct napi_struct napi;
|
|
|
|
/* statistics */
|
|
struct net_device_stats stats;
|
|
struct {
|
|
int max_tx_qlen;
|
|
int tx_ints;
|
|
int rx_ints;
|
|
int tx_underrun;
|
|
} lstats;
|
|
|
|
/* Tx control lock. This protects the transmit buffer ring
|
|
* state along with the "tx full" state of the driver. This
|
|
* means all netif_queue flow control actions are protected
|
|
* by this lock as well.
|
|
*/
|
|
spinlock_t lock;
|
|
|
|
int phy_addr;
|
|
int fullduplex;
|
|
unsigned short saved_lpa;
|
|
struct timer_list timer;
|
|
enum tc35815_timer_state timer_state; /* State of auto-neg timer. */
|
|
unsigned int timer_ticks; /* Number of clicks at each state */
|
|
|
|
/*
|
|
* Transmitting: Batch Mode.
|
|
* 1 BD in 1 TxFD.
|
|
* Receiving: Packing Mode. (TC35815_USE_PACKEDBUFFER)
|
|
* 1 circular FD for Free Buffer List.
|
|
* RX_BUF_NUM BD in Free Buffer FD.
|
|
* One Free Buffer BD has PAGE_SIZE data buffer.
|
|
* Or Non-Packing Mode.
|
|
* 1 circular FD for Free Buffer List.
|
|
* RX_BUF_NUM BD in Free Buffer FD.
|
|
* One Free Buffer BD has ETH_FRAME_LEN data buffer.
|
|
*/
|
|
void * fd_buf; /* for TxFD, RxFD, FrFD */
|
|
dma_addr_t fd_buf_dma;
|
|
struct TxFD *tfd_base;
|
|
unsigned int tfd_start;
|
|
unsigned int tfd_end;
|
|
struct RxFD *rfd_base;
|
|
struct RxFD *rfd_limit;
|
|
struct RxFD *rfd_cur;
|
|
struct FrFD *fbl_ptr;
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
unsigned char fbl_curid;
|
|
void * data_buf[RX_BUF_NUM]; /* packing */
|
|
dma_addr_t data_buf_dma[RX_BUF_NUM];
|
|
struct {
|
|
struct sk_buff *skb;
|
|
dma_addr_t skb_dma;
|
|
} tx_skbs[TX_FD_NUM];
|
|
#else
|
|
unsigned int fbl_count;
|
|
struct {
|
|
struct sk_buff *skb;
|
|
dma_addr_t skb_dma;
|
|
} tx_skbs[TX_FD_NUM], rx_skbs[RX_BUF_NUM];
|
|
#endif
|
|
struct mii_if_info mii;
|
|
unsigned short mii_id[2];
|
|
u32 msg_enable;
|
|
board_t boardtype;
|
|
};
|
|
|
|
static inline dma_addr_t fd_virt_to_bus(struct tc35815_local *lp, void *virt)
|
|
{
|
|
return lp->fd_buf_dma + ((u8 *)virt - (u8 *)lp->fd_buf);
|
|
}
|
|
#ifdef DEBUG
|
|
static inline void *fd_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
|
|
{
|
|
return (void *)((u8 *)lp->fd_buf + (bus - lp->fd_buf_dma));
|
|
}
|
|
#endif
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
static inline void *rxbuf_bus_to_virt(struct tc35815_local *lp, dma_addr_t bus)
|
|
{
|
|
int i;
|
|
for (i = 0; i < RX_BUF_NUM; i++) {
|
|
if (bus >= lp->data_buf_dma[i] &&
|
|
bus < lp->data_buf_dma[i] + PAGE_SIZE)
|
|
return (void *)((u8 *)lp->data_buf[i] +
|
|
(bus - lp->data_buf_dma[i]));
|
|
}
|
|
return NULL;
|
|
}
|
|
|
|
#define TC35815_DMA_SYNC_ONDEMAND
|
|
static void* alloc_rxbuf_page(struct pci_dev *hwdev, dma_addr_t *dma_handle)
|
|
{
|
|
#ifdef TC35815_DMA_SYNC_ONDEMAND
|
|
void *buf;
|
|
/* pci_map + pci_dma_sync will be more effective than
|
|
* pci_alloc_consistent on some archs. */
|
|
if ((buf = (void *)__get_free_page(GFP_ATOMIC)) == NULL)
|
|
return NULL;
|
|
*dma_handle = pci_map_single(hwdev, buf, PAGE_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(*dma_handle)) {
|
|
free_page((unsigned long)buf);
|
|
return NULL;
|
|
}
|
|
return buf;
|
|
#else
|
|
return pci_alloc_consistent(hwdev, PAGE_SIZE, dma_handle);
|
|
#endif
|
|
}
|
|
|
|
static void free_rxbuf_page(struct pci_dev *hwdev, void *buf, dma_addr_t dma_handle)
|
|
{
|
|
#ifdef TC35815_DMA_SYNC_ONDEMAND
|
|
pci_unmap_single(hwdev, dma_handle, PAGE_SIZE, PCI_DMA_FROMDEVICE);
|
|
free_page((unsigned long)buf);
|
|
#else
|
|
pci_free_consistent(hwdev, PAGE_SIZE, buf, dma_handle);
|
|
#endif
|
|
}
|
|
#else /* TC35815_USE_PACKEDBUFFER */
|
|
static struct sk_buff *alloc_rxbuf_skb(struct net_device *dev,
|
|
struct pci_dev *hwdev,
|
|
dma_addr_t *dma_handle)
|
|
{
|
|
struct sk_buff *skb;
|
|
skb = dev_alloc_skb(RX_BUF_SIZE);
|
|
if (!skb)
|
|
return NULL;
|
|
*dma_handle = pci_map_single(hwdev, skb->data, RX_BUF_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
if (pci_dma_mapping_error(*dma_handle)) {
|
|
dev_kfree_skb_any(skb);
|
|
return NULL;
|
|
}
|
|
skb_reserve(skb, 2); /* make IP header 4byte aligned */
|
|
return skb;
|
|
}
|
|
|
|
static void free_rxbuf_skb(struct pci_dev *hwdev, struct sk_buff *skb, dma_addr_t dma_handle)
|
|
{
|
|
pci_unmap_single(hwdev, dma_handle, RX_BUF_SIZE,
|
|
PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
#endif /* TC35815_USE_PACKEDBUFFER */
|
|
|
|
/* Index to functions, as function prototypes. */
|
|
|
|
static int tc35815_open(struct net_device *dev);
|
|
static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev);
|
|
static irqreturn_t tc35815_interrupt(int irq, void *dev_id);
|
|
#ifdef TC35815_NAPI
|
|
static int tc35815_rx(struct net_device *dev, int limit);
|
|
static int tc35815_poll(struct napi_struct *napi, int budget);
|
|
#else
|
|
static void tc35815_rx(struct net_device *dev);
|
|
#endif
|
|
static void tc35815_txdone(struct net_device *dev);
|
|
static int tc35815_close(struct net_device *dev);
|
|
static struct net_device_stats *tc35815_get_stats(struct net_device *dev);
|
|
static void tc35815_set_multicast_list(struct net_device *dev);
|
|
static void tc35815_tx_timeout(struct net_device *dev);
|
|
static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void tc35815_poll_controller(struct net_device *dev);
|
|
#endif
|
|
static const struct ethtool_ops tc35815_ethtool_ops;
|
|
|
|
/* Example routines you must write ;->. */
|
|
static void tc35815_chip_reset(struct net_device *dev);
|
|
static void tc35815_chip_init(struct net_device *dev);
|
|
static void tc35815_find_phy(struct net_device *dev);
|
|
static void tc35815_phy_chip_init(struct net_device *dev);
|
|
|
|
#ifdef DEBUG
|
|
static void panic_queues(struct net_device *dev);
|
|
#endif
|
|
|
|
static void tc35815_timer(unsigned long data);
|
|
static void tc35815_start_auto_negotiation(struct net_device *dev,
|
|
struct ethtool_cmd *ep);
|
|
static int tc_mdio_read(struct net_device *dev, int phy_id, int location);
|
|
static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
|
|
int val);
|
|
|
|
#ifdef CONFIG_CPU_TX49XX
|
|
/*
|
|
* Find a platform_device providing a MAC address. The platform code
|
|
* should provide a "tc35815-mac" device with a MAC address in its
|
|
* platform_data.
|
|
*/
|
|
static int __devinit tc35815_mac_match(struct device *dev, void *data)
|
|
{
|
|
struct platform_device *plat_dev = to_platform_device(dev);
|
|
struct pci_dev *pci_dev = data;
|
|
unsigned int id = pci_dev->irq;
|
|
return !strcmp(plat_dev->name, "tc35815-mac") && plat_dev->id == id;
|
|
}
|
|
|
|
static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct device *pd = bus_find_device(&platform_bus_type, NULL,
|
|
lp->pci_dev, tc35815_mac_match);
|
|
if (pd) {
|
|
if (pd->platform_data)
|
|
memcpy(dev->dev_addr, pd->platform_data, ETH_ALEN);
|
|
put_device(pd);
|
|
return is_valid_ether_addr(dev->dev_addr) ? 0 : -ENODEV;
|
|
}
|
|
return -ENODEV;
|
|
}
|
|
#else
|
|
static int __devinit tc35815_read_plat_dev_addr(struct net_device *dev)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int __devinit tc35815_init_dev_addr (struct net_device *dev)
|
|
{
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int i;
|
|
|
|
while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
|
|
;
|
|
for (i = 0; i < 6; i += 2) {
|
|
unsigned short data;
|
|
tc_writel(PROM_Busy | PROM_Read | (i / 2 + 2), &tr->PROM_Ctl);
|
|
while (tc_readl(&tr->PROM_Ctl) & PROM_Busy)
|
|
;
|
|
data = tc_readl(&tr->PROM_Data);
|
|
dev->dev_addr[i] = data & 0xff;
|
|
dev->dev_addr[i+1] = data >> 8;
|
|
}
|
|
if (!is_valid_ether_addr(dev->dev_addr))
|
|
return tc35815_read_plat_dev_addr(dev);
|
|
return 0;
|
|
}
|
|
|
|
static int __devinit tc35815_init_one (struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
void __iomem *ioaddr = NULL;
|
|
struct net_device *dev;
|
|
struct tc35815_local *lp;
|
|
int rc;
|
|
unsigned long mmio_start, mmio_end, mmio_flags, mmio_len;
|
|
|
|
static int printed_version;
|
|
if (!printed_version++) {
|
|
printk(version);
|
|
dev_printk(KERN_DEBUG, &pdev->dev,
|
|
"speed:%d duplex:%d doforce:%d\n",
|
|
options.speed, options.duplex, options.doforce);
|
|
}
|
|
|
|
if (!pdev->irq) {
|
|
dev_warn(&pdev->dev, "no IRQ assigned.\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* dev zeroed in alloc_etherdev */
|
|
dev = alloc_etherdev (sizeof (*lp));
|
|
if (dev == NULL) {
|
|
dev_err(&pdev->dev, "unable to alloc new ethernet\n");
|
|
return -ENOMEM;
|
|
}
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
lp = dev->priv;
|
|
lp->dev = dev;
|
|
|
|
/* enable device (incl. PCI PM wakeup), and bus-mastering */
|
|
rc = pci_enable_device (pdev);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
mmio_start = pci_resource_start (pdev, 1);
|
|
mmio_end = pci_resource_end (pdev, 1);
|
|
mmio_flags = pci_resource_flags (pdev, 1);
|
|
mmio_len = pci_resource_len (pdev, 1);
|
|
|
|
/* set this immediately, we need to know before
|
|
* we talk to the chip directly */
|
|
|
|
/* make sure PCI base addr 1 is MMIO */
|
|
if (!(mmio_flags & IORESOURCE_MEM)) {
|
|
dev_err(&pdev->dev, "region #1 not an MMIO resource, aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
/* check for weird/broken PCI region reporting */
|
|
if ((mmio_len < sizeof(struct tc35815_regs))) {
|
|
dev_err(&pdev->dev, "Invalid PCI region size(s), aborting\n");
|
|
rc = -ENODEV;
|
|
goto err_out;
|
|
}
|
|
|
|
rc = pci_request_regions (pdev, MODNAME);
|
|
if (rc)
|
|
goto err_out;
|
|
|
|
pci_set_master (pdev);
|
|
|
|
/* ioremap MMIO region */
|
|
ioaddr = ioremap (mmio_start, mmio_len);
|
|
if (ioaddr == NULL) {
|
|
dev_err(&pdev->dev, "cannot remap MMIO, aborting\n");
|
|
rc = -EIO;
|
|
goto err_out_free_res;
|
|
}
|
|
|
|
/* Initialize the device structure. */
|
|
dev->open = tc35815_open;
|
|
dev->hard_start_xmit = tc35815_send_packet;
|
|
dev->stop = tc35815_close;
|
|
dev->get_stats = tc35815_get_stats;
|
|
dev->set_multicast_list = tc35815_set_multicast_list;
|
|
dev->do_ioctl = tc35815_ioctl;
|
|
dev->ethtool_ops = &tc35815_ethtool_ops;
|
|
dev->tx_timeout = tc35815_tx_timeout;
|
|
dev->watchdog_timeo = TC35815_TX_TIMEOUT;
|
|
#ifdef TC35815_NAPI
|
|
netif_napi_add(dev, &lp->napi, tc35815_poll, NAPI_WEIGHT);
|
|
#endif
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
dev->poll_controller = tc35815_poll_controller;
|
|
#endif
|
|
|
|
dev->irq = pdev->irq;
|
|
dev->base_addr = (unsigned long) ioaddr;
|
|
|
|
spin_lock_init(&lp->lock);
|
|
lp->pci_dev = pdev;
|
|
lp->boardtype = ent->driver_data;
|
|
|
|
lp->msg_enable = NETIF_MSG_TX_ERR | NETIF_MSG_HW | NETIF_MSG_DRV | NETIF_MSG_LINK;
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
/* Soft reset the chip. */
|
|
tc35815_chip_reset(dev);
|
|
|
|
/* Retrieve the ethernet address. */
|
|
if (tc35815_init_dev_addr(dev)) {
|
|
dev_warn(&pdev->dev, "not valid ether addr\n");
|
|
random_ether_addr(dev->dev_addr);
|
|
}
|
|
|
|
rc = register_netdev (dev);
|
|
if (rc)
|
|
goto err_out_unmap;
|
|
|
|
memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
|
|
printk(KERN_INFO "%s: %s at 0x%lx, "
|
|
"%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x, "
|
|
"IRQ %d\n",
|
|
dev->name,
|
|
board_info[ent->driver_data].name,
|
|
dev->base_addr,
|
|
dev->dev_addr[0], dev->dev_addr[1],
|
|
dev->dev_addr[2], dev->dev_addr[3],
|
|
dev->dev_addr[4], dev->dev_addr[5],
|
|
dev->irq);
|
|
|
|
setup_timer(&lp->timer, tc35815_timer, (unsigned long) dev);
|
|
lp->mii.dev = dev;
|
|
lp->mii.mdio_read = tc_mdio_read;
|
|
lp->mii.mdio_write = tc_mdio_write;
|
|
lp->mii.phy_id_mask = 0x1f;
|
|
lp->mii.reg_num_mask = 0x1f;
|
|
tc35815_find_phy(dev);
|
|
lp->mii.phy_id = lp->phy_addr;
|
|
lp->mii.full_duplex = 0;
|
|
lp->mii.force_media = 0;
|
|
|
|
return 0;
|
|
|
|
err_out_unmap:
|
|
iounmap(ioaddr);
|
|
err_out_free_res:
|
|
pci_release_regions (pdev);
|
|
err_out:
|
|
free_netdev (dev);
|
|
return rc;
|
|
}
|
|
|
|
|
|
static void __devexit tc35815_remove_one (struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata (pdev);
|
|
unsigned long mmio_addr;
|
|
|
|
mmio_addr = dev->base_addr;
|
|
|
|
unregister_netdev (dev);
|
|
|
|
if (mmio_addr) {
|
|
iounmap ((void __iomem *)mmio_addr);
|
|
pci_release_regions (pdev);
|
|
}
|
|
|
|
free_netdev (dev);
|
|
|
|
pci_set_drvdata (pdev, NULL);
|
|
}
|
|
|
|
static int
|
|
tc35815_init_queues(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int i;
|
|
unsigned long fd_addr;
|
|
|
|
if (!lp->fd_buf) {
|
|
BUG_ON(sizeof(struct FDesc) +
|
|
sizeof(struct BDesc) * RX_BUF_NUM +
|
|
sizeof(struct FDesc) * RX_FD_NUM +
|
|
sizeof(struct TxFD) * TX_FD_NUM >
|
|
PAGE_SIZE * FD_PAGE_NUM);
|
|
|
|
if ((lp->fd_buf = pci_alloc_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM, &lp->fd_buf_dma)) == 0)
|
|
return -ENOMEM;
|
|
for (i = 0; i < RX_BUF_NUM; i++) {
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
if ((lp->data_buf[i] = alloc_rxbuf_page(lp->pci_dev, &lp->data_buf_dma[i])) == NULL) {
|
|
while (--i >= 0) {
|
|
free_rxbuf_page(lp->pci_dev,
|
|
lp->data_buf[i],
|
|
lp->data_buf_dma[i]);
|
|
lp->data_buf[i] = NULL;
|
|
}
|
|
pci_free_consistent(lp->pci_dev,
|
|
PAGE_SIZE * FD_PAGE_NUM,
|
|
lp->fd_buf,
|
|
lp->fd_buf_dma);
|
|
lp->fd_buf = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
#else
|
|
lp->rx_skbs[i].skb =
|
|
alloc_rxbuf_skb(dev, lp->pci_dev,
|
|
&lp->rx_skbs[i].skb_dma);
|
|
if (!lp->rx_skbs[i].skb) {
|
|
while (--i >= 0) {
|
|
free_rxbuf_skb(lp->pci_dev,
|
|
lp->rx_skbs[i].skb,
|
|
lp->rx_skbs[i].skb_dma);
|
|
lp->rx_skbs[i].skb = NULL;
|
|
}
|
|
pci_free_consistent(lp->pci_dev,
|
|
PAGE_SIZE * FD_PAGE_NUM,
|
|
lp->fd_buf,
|
|
lp->fd_buf_dma);
|
|
lp->fd_buf = NULL;
|
|
return -ENOMEM;
|
|
}
|
|
#endif
|
|
}
|
|
printk(KERN_DEBUG "%s: FD buf %p DataBuf",
|
|
dev->name, lp->fd_buf);
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
printk(" DataBuf");
|
|
for (i = 0; i < RX_BUF_NUM; i++)
|
|
printk(" %p", lp->data_buf[i]);
|
|
#endif
|
|
printk("\n");
|
|
} else {
|
|
for (i = 0; i < FD_PAGE_NUM; i++) {
|
|
clear_page((void *)((unsigned long)lp->fd_buf + i * PAGE_SIZE));
|
|
}
|
|
}
|
|
fd_addr = (unsigned long)lp->fd_buf;
|
|
|
|
/* Free Descriptors (for Receive) */
|
|
lp->rfd_base = (struct RxFD *)fd_addr;
|
|
fd_addr += sizeof(struct RxFD) * RX_FD_NUM;
|
|
for (i = 0; i < RX_FD_NUM; i++) {
|
|
lp->rfd_base[i].fd.FDCtl = cpu_to_le32(FD_CownsFD);
|
|
}
|
|
lp->rfd_cur = lp->rfd_base;
|
|
lp->rfd_limit = (struct RxFD *)fd_addr - (RX_FD_RESERVE + 1);
|
|
|
|
/* Transmit Descriptors */
|
|
lp->tfd_base = (struct TxFD *)fd_addr;
|
|
fd_addr += sizeof(struct TxFD) * TX_FD_NUM;
|
|
for (i = 0; i < TX_FD_NUM; i++) {
|
|
lp->tfd_base[i].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[i+1]));
|
|
lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
|
|
lp->tfd_base[i].fd.FDCtl = cpu_to_le32(0);
|
|
}
|
|
lp->tfd_base[TX_FD_NUM-1].fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, &lp->tfd_base[0]));
|
|
lp->tfd_start = 0;
|
|
lp->tfd_end = 0;
|
|
|
|
/* Buffer List (for Receive) */
|
|
lp->fbl_ptr = (struct FrFD *)fd_addr;
|
|
lp->fbl_ptr->fd.FDNext = cpu_to_le32(fd_virt_to_bus(lp, lp->fbl_ptr));
|
|
lp->fbl_ptr->fd.FDCtl = cpu_to_le32(RX_BUF_NUM | FD_CownsFD);
|
|
#ifndef TC35815_USE_PACKEDBUFFER
|
|
/*
|
|
* move all allocated skbs to head of rx_skbs[] array.
|
|
* fbl_count mighe not be RX_BUF_NUM if alloc_rxbuf_skb() in
|
|
* tc35815_rx() had failed.
|
|
*/
|
|
lp->fbl_count = 0;
|
|
for (i = 0; i < RX_BUF_NUM; i++) {
|
|
if (lp->rx_skbs[i].skb) {
|
|
if (i != lp->fbl_count) {
|
|
lp->rx_skbs[lp->fbl_count].skb =
|
|
lp->rx_skbs[i].skb;
|
|
lp->rx_skbs[lp->fbl_count].skb_dma =
|
|
lp->rx_skbs[i].skb_dma;
|
|
}
|
|
lp->fbl_count++;
|
|
}
|
|
}
|
|
#endif
|
|
for (i = 0; i < RX_BUF_NUM; i++) {
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
lp->fbl_ptr->bd[i].BuffData = cpu_to_le32(lp->data_buf_dma[i]);
|
|
#else
|
|
if (i >= lp->fbl_count) {
|
|
lp->fbl_ptr->bd[i].BuffData = 0;
|
|
lp->fbl_ptr->bd[i].BDCtl = 0;
|
|
continue;
|
|
}
|
|
lp->fbl_ptr->bd[i].BuffData =
|
|
cpu_to_le32(lp->rx_skbs[i].skb_dma);
|
|
#endif
|
|
/* BDID is index of FrFD.bd[] */
|
|
lp->fbl_ptr->bd[i].BDCtl =
|
|
cpu_to_le32(BD_CownsBD | (i << BD_RxBDID_SHIFT) |
|
|
RX_BUF_SIZE);
|
|
}
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
lp->fbl_curid = 0;
|
|
#endif
|
|
|
|
printk(KERN_DEBUG "%s: TxFD %p RxFD %p FrFD %p\n",
|
|
dev->name, lp->tfd_base, lp->rfd_base, lp->fbl_ptr);
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
tc35815_clear_queues(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int i;
|
|
|
|
for (i = 0; i < TX_FD_NUM; i++) {
|
|
u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem);
|
|
struct sk_buff *skb =
|
|
fdsystem != 0xffffffff ?
|
|
lp->tx_skbs[fdsystem].skb : NULL;
|
|
#ifdef DEBUG
|
|
if (lp->tx_skbs[i].skb != skb) {
|
|
printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(lp->tx_skbs[i].skb != skb);
|
|
#endif
|
|
if (skb) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_skbs[i].skb = NULL;
|
|
lp->tx_skbs[i].skb_dma = 0;
|
|
dev_kfree_skb_any(skb);
|
|
}
|
|
lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
|
|
}
|
|
|
|
tc35815_init_queues(dev);
|
|
}
|
|
|
|
static void
|
|
tc35815_free_queues(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int i;
|
|
|
|
if (lp->tfd_base) {
|
|
for (i = 0; i < TX_FD_NUM; i++) {
|
|
u32 fdsystem = le32_to_cpu(lp->tfd_base[i].fd.FDSystem);
|
|
struct sk_buff *skb =
|
|
fdsystem != 0xffffffff ?
|
|
lp->tx_skbs[fdsystem].skb : NULL;
|
|
#ifdef DEBUG
|
|
if (lp->tx_skbs[i].skb != skb) {
|
|
printk("%s: tx_skbs mismatch(%d).\n", dev->name, i);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(lp->tx_skbs[i].skb != skb);
|
|
#endif
|
|
if (skb) {
|
|
dev_kfree_skb(skb);
|
|
pci_unmap_single(lp->pci_dev, lp->tx_skbs[i].skb_dma, skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_skbs[i].skb = NULL;
|
|
lp->tx_skbs[i].skb_dma = 0;
|
|
}
|
|
lp->tfd_base[i].fd.FDSystem = cpu_to_le32(0xffffffff);
|
|
}
|
|
}
|
|
|
|
lp->rfd_base = NULL;
|
|
lp->rfd_limit = NULL;
|
|
lp->rfd_cur = NULL;
|
|
lp->fbl_ptr = NULL;
|
|
|
|
for (i = 0; i < RX_BUF_NUM; i++) {
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
if (lp->data_buf[i]) {
|
|
free_rxbuf_page(lp->pci_dev,
|
|
lp->data_buf[i], lp->data_buf_dma[i]);
|
|
lp->data_buf[i] = NULL;
|
|
}
|
|
#else
|
|
if (lp->rx_skbs[i].skb) {
|
|
free_rxbuf_skb(lp->pci_dev, lp->rx_skbs[i].skb,
|
|
lp->rx_skbs[i].skb_dma);
|
|
lp->rx_skbs[i].skb = NULL;
|
|
}
|
|
#endif
|
|
}
|
|
if (lp->fd_buf) {
|
|
pci_free_consistent(lp->pci_dev, PAGE_SIZE * FD_PAGE_NUM,
|
|
lp->fd_buf, lp->fd_buf_dma);
|
|
lp->fd_buf = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
dump_txfd(struct TxFD *fd)
|
|
{
|
|
printk("TxFD(%p): %08x %08x %08x %08x\n", fd,
|
|
le32_to_cpu(fd->fd.FDNext),
|
|
le32_to_cpu(fd->fd.FDSystem),
|
|
le32_to_cpu(fd->fd.FDStat),
|
|
le32_to_cpu(fd->fd.FDCtl));
|
|
printk("BD: ");
|
|
printk(" %08x %08x",
|
|
le32_to_cpu(fd->bd.BuffData),
|
|
le32_to_cpu(fd->bd.BDCtl));
|
|
printk("\n");
|
|
}
|
|
|
|
static int
|
|
dump_rxfd(struct RxFD *fd)
|
|
{
|
|
int i, bd_count = (le32_to_cpu(fd->fd.FDCtl) & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT;
|
|
if (bd_count > 8)
|
|
bd_count = 8;
|
|
printk("RxFD(%p): %08x %08x %08x %08x\n", fd,
|
|
le32_to_cpu(fd->fd.FDNext),
|
|
le32_to_cpu(fd->fd.FDSystem),
|
|
le32_to_cpu(fd->fd.FDStat),
|
|
le32_to_cpu(fd->fd.FDCtl));
|
|
if (le32_to_cpu(fd->fd.FDCtl) & FD_CownsFD)
|
|
return 0;
|
|
printk("BD: ");
|
|
for (i = 0; i < bd_count; i++)
|
|
printk(" %08x %08x",
|
|
le32_to_cpu(fd->bd[i].BuffData),
|
|
le32_to_cpu(fd->bd[i].BDCtl));
|
|
printk("\n");
|
|
return bd_count;
|
|
}
|
|
|
|
#if defined(DEBUG) || defined(TC35815_USE_PACKEDBUFFER)
|
|
static void
|
|
dump_frfd(struct FrFD *fd)
|
|
{
|
|
int i;
|
|
printk("FrFD(%p): %08x %08x %08x %08x\n", fd,
|
|
le32_to_cpu(fd->fd.FDNext),
|
|
le32_to_cpu(fd->fd.FDSystem),
|
|
le32_to_cpu(fd->fd.FDStat),
|
|
le32_to_cpu(fd->fd.FDCtl));
|
|
printk("BD: ");
|
|
for (i = 0; i < RX_BUF_NUM; i++)
|
|
printk(" %08x %08x",
|
|
le32_to_cpu(fd->bd[i].BuffData),
|
|
le32_to_cpu(fd->bd[i].BDCtl));
|
|
printk("\n");
|
|
}
|
|
#endif
|
|
|
|
#ifdef DEBUG
|
|
static void
|
|
panic_queues(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int i;
|
|
|
|
printk("TxFD base %p, start %u, end %u\n",
|
|
lp->tfd_base, lp->tfd_start, lp->tfd_end);
|
|
printk("RxFD base %p limit %p cur %p\n",
|
|
lp->rfd_base, lp->rfd_limit, lp->rfd_cur);
|
|
printk("FrFD %p\n", lp->fbl_ptr);
|
|
for (i = 0; i < TX_FD_NUM; i++)
|
|
dump_txfd(&lp->tfd_base[i]);
|
|
for (i = 0; i < RX_FD_NUM; i++) {
|
|
int bd_count = dump_rxfd(&lp->rfd_base[i]);
|
|
i += (bd_count + 1) / 2; /* skip BDs */
|
|
}
|
|
dump_frfd(lp->fbl_ptr);
|
|
panic("%s: Illegal queue state.", dev->name);
|
|
}
|
|
#endif
|
|
|
|
static void print_eth(char *add)
|
|
{
|
|
int i;
|
|
|
|
printk("print_eth(%p)\n", add);
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2X", (unsigned char) add[i + 6]);
|
|
printk(" =>");
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %2.2X", (unsigned char) add[i]);
|
|
printk(" : %2.2X%2.2X\n", (unsigned char) add[12], (unsigned char) add[13]);
|
|
}
|
|
|
|
static int tc35815_tx_full(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
return ((lp->tfd_start + 1) % TX_FD_NUM == lp->tfd_end);
|
|
}
|
|
|
|
static void tc35815_restart(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
int do_phy_reset = 1;
|
|
del_timer(&lp->timer); /* Kill if running */
|
|
|
|
if (lp->mii_id[0] == 0x0016 && (lp->mii_id[1] & 0xfc00) == 0xf800) {
|
|
/* Resetting PHY cause problem on some chip... (SEEQ 80221) */
|
|
do_phy_reset = 0;
|
|
}
|
|
if (do_phy_reset) {
|
|
int timeout;
|
|
tc_mdio_write(dev, pid, MII_BMCR, BMCR_RESET);
|
|
timeout = 100;
|
|
while (--timeout) {
|
|
if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_RESET))
|
|
break;
|
|
udelay(1);
|
|
}
|
|
if (!timeout)
|
|
printk(KERN_ERR "%s: BMCR reset failed.\n", dev->name);
|
|
}
|
|
|
|
tc35815_chip_reset(dev);
|
|
tc35815_clear_queues(dev);
|
|
tc35815_chip_init(dev);
|
|
/* Reconfigure CAM again since tc35815_chip_init() initialize it. */
|
|
tc35815_set_multicast_list(dev);
|
|
}
|
|
|
|
static void tc35815_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
|
|
printk(KERN_WARNING "%s: transmit timed out, status %#x\n",
|
|
dev->name, tc_readl(&tr->Tx_Stat));
|
|
|
|
/* Try to restart the adaptor. */
|
|
spin_lock_irq(&lp->lock);
|
|
tc35815_restart(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
lp->stats.tx_errors++;
|
|
|
|
/* If we have space available to accept new transmit
|
|
* requests, wake up the queueing layer. This would
|
|
* be the case if the chipset_init() call above just
|
|
* flushes out the tx queue and empties it.
|
|
*
|
|
* If instead, the tx queue is retained then the
|
|
* netif_wake_queue() call should be placed in the
|
|
* TX completion interrupt handler of the driver instead
|
|
* of here.
|
|
*/
|
|
if (!tc35815_tx_full(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/*
|
|
* Open/initialize the board. This is called (in the current kernel)
|
|
* sometime after booting when the 'ifconfig' program is run.
|
|
*
|
|
* This routine should set everything up anew at each open, even
|
|
* registers that "should" only need to be set once at boot, so that
|
|
* there is non-reboot way to recover if something goes wrong.
|
|
*/
|
|
static int
|
|
tc35815_open(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
|
|
/*
|
|
* This is used if the interrupt line can turned off (shared).
|
|
* See 3c503.c for an example of selecting the IRQ at config-time.
|
|
*/
|
|
if (request_irq(dev->irq, &tc35815_interrupt, IRQF_SHARED, dev->name, dev)) {
|
|
return -EAGAIN;
|
|
}
|
|
|
|
del_timer(&lp->timer); /* Kill if running */
|
|
tc35815_chip_reset(dev);
|
|
|
|
if (tc35815_init_queues(dev) != 0) {
|
|
free_irq(dev->irq, dev);
|
|
return -EAGAIN;
|
|
}
|
|
|
|
#ifdef TC35815_NAPI
|
|
napi_enable(&lp->napi);
|
|
#endif
|
|
|
|
/* Reset the hardware here. Don't forget to set the station address. */
|
|
spin_lock_irq(&lp->lock);
|
|
tc35815_chip_init(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
/* We are now ready to accept transmit requeusts from
|
|
* the queueing layer of the networking.
|
|
*/
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This will only be invoked if your driver is _not_ in XOFF state.
|
|
* What this means is that you need not check it, and that this
|
|
* invariant will hold if you make sure that the netif_*_queue()
|
|
* calls are done at the proper times.
|
|
*/
|
|
static int tc35815_send_packet(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct TxFD *txfd;
|
|
unsigned long flags;
|
|
|
|
/* If some error occurs while trying to transmit this
|
|
* packet, you should return '1' from this function.
|
|
* In such a case you _may not_ do anything to the
|
|
* SKB, it is still owned by the network queueing
|
|
* layer when an error is returned. This means you
|
|
* may not modify any SKB fields, you may not free
|
|
* the SKB, etc.
|
|
*/
|
|
|
|
/* This is the most common case for modern hardware.
|
|
* The spinlock protects this code from the TX complete
|
|
* hardware interrupt handler. Queue flow control is
|
|
* thus managed under this lock as well.
|
|
*/
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
/* failsafe... (handle txdone now if half of FDs are used) */
|
|
if ((lp->tfd_start + TX_FD_NUM - lp->tfd_end) % TX_FD_NUM >
|
|
TX_FD_NUM / 2)
|
|
tc35815_txdone(dev);
|
|
|
|
if (netif_msg_pktdata(lp))
|
|
print_eth(skb->data);
|
|
#ifdef DEBUG
|
|
if (lp->tx_skbs[lp->tfd_start].skb) {
|
|
printk("%s: tx_skbs conflict.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(lp->tx_skbs[lp->tfd_start].skb);
|
|
#endif
|
|
lp->tx_skbs[lp->tfd_start].skb = skb;
|
|
lp->tx_skbs[lp->tfd_start].skb_dma = pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
|
|
|
|
/*add to ring */
|
|
txfd = &lp->tfd_base[lp->tfd_start];
|
|
txfd->bd.BuffData = cpu_to_le32(lp->tx_skbs[lp->tfd_start].skb_dma);
|
|
txfd->bd.BDCtl = cpu_to_le32(skb->len);
|
|
txfd->fd.FDSystem = cpu_to_le32(lp->tfd_start);
|
|
txfd->fd.FDCtl = cpu_to_le32(FD_CownsFD | (1 << FD_BDCnt_SHIFT));
|
|
|
|
if (lp->tfd_start == lp->tfd_end) {
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
/* Start DMA Transmitter. */
|
|
txfd->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
|
|
#ifdef GATHER_TXINT
|
|
txfd->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
|
|
#endif
|
|
if (netif_msg_tx_queued(lp)) {
|
|
printk("%s: starting TxFD.\n", dev->name);
|
|
dump_txfd(txfd);
|
|
}
|
|
tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr);
|
|
} else {
|
|
txfd->fd.FDNext &= cpu_to_le32(~FD_Next_EOL);
|
|
if (netif_msg_tx_queued(lp)) {
|
|
printk("%s: queueing TxFD.\n", dev->name);
|
|
dump_txfd(txfd);
|
|
}
|
|
}
|
|
lp->tfd_start = (lp->tfd_start + 1) % TX_FD_NUM;
|
|
|
|
dev->trans_start = jiffies;
|
|
|
|
/* If we just used up the very last entry in the
|
|
* TX ring on this device, tell the queueing
|
|
* layer to send no more.
|
|
*/
|
|
if (tc35815_tx_full(dev)) {
|
|
if (netif_msg_tx_queued(lp))
|
|
printk(KERN_WARNING "%s: TxFD Exhausted.\n", dev->name);
|
|
netif_stop_queue(dev);
|
|
}
|
|
|
|
/* When the TX completion hw interrupt arrives, this
|
|
* is when the transmit statistics are updated.
|
|
*/
|
|
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
#define FATAL_ERROR_INT \
|
|
(Int_IntPCI | Int_DmParErr | Int_IntNRAbt)
|
|
static void tc35815_fatal_error_interrupt(struct net_device *dev, u32 status)
|
|
{
|
|
static int count;
|
|
printk(KERN_WARNING "%s: Fatal Error Intterrupt (%#x):",
|
|
dev->name, status);
|
|
if (status & Int_IntPCI)
|
|
printk(" IntPCI");
|
|
if (status & Int_DmParErr)
|
|
printk(" DmParErr");
|
|
if (status & Int_IntNRAbt)
|
|
printk(" IntNRAbt");
|
|
printk("\n");
|
|
if (count++ > 100)
|
|
panic("%s: Too many fatal errors.", dev->name);
|
|
printk(KERN_WARNING "%s: Resetting ...\n", dev->name);
|
|
/* Try to restart the adaptor. */
|
|
tc35815_restart(dev);
|
|
}
|
|
|
|
#ifdef TC35815_NAPI
|
|
static int tc35815_do_interrupt(struct net_device *dev, u32 status, int limit)
|
|
#else
|
|
static int tc35815_do_interrupt(struct net_device *dev, u32 status)
|
|
#endif
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int ret = -1;
|
|
|
|
/* Fatal errors... */
|
|
if (status & FATAL_ERROR_INT) {
|
|
tc35815_fatal_error_interrupt(dev, status);
|
|
return 0;
|
|
}
|
|
/* recoverable errors */
|
|
if (status & Int_IntFDAEx) {
|
|
/* disable FDAEx int. (until we make rooms...) */
|
|
tc_writel(tc_readl(&tr->Int_En) & ~Int_FDAExEn, &tr->Int_En);
|
|
printk(KERN_WARNING
|
|
"%s: Free Descriptor Area Exhausted (%#x).\n",
|
|
dev->name, status);
|
|
lp->stats.rx_dropped++;
|
|
ret = 0;
|
|
}
|
|
if (status & Int_IntBLEx) {
|
|
/* disable BLEx int. (until we make rooms...) */
|
|
tc_writel(tc_readl(&tr->Int_En) & ~Int_BLExEn, &tr->Int_En);
|
|
printk(KERN_WARNING
|
|
"%s: Buffer List Exhausted (%#x).\n",
|
|
dev->name, status);
|
|
lp->stats.rx_dropped++;
|
|
ret = 0;
|
|
}
|
|
if (status & Int_IntExBD) {
|
|
printk(KERN_WARNING
|
|
"%s: Excessive Buffer Descriptiors (%#x).\n",
|
|
dev->name, status);
|
|
lp->stats.rx_length_errors++;
|
|
ret = 0;
|
|
}
|
|
|
|
/* normal notification */
|
|
if (status & Int_IntMacRx) {
|
|
/* Got a packet(s). */
|
|
#ifdef TC35815_NAPI
|
|
ret = tc35815_rx(dev, limit);
|
|
#else
|
|
tc35815_rx(dev);
|
|
ret = 0;
|
|
#endif
|
|
lp->lstats.rx_ints++;
|
|
}
|
|
if (status & Int_IntMacTx) {
|
|
/* Transmit complete. */
|
|
lp->lstats.tx_ints++;
|
|
tc35815_txdone(dev);
|
|
netif_wake_queue(dev);
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* The typical workload of the driver:
|
|
* Handle the network interface interrupts.
|
|
*/
|
|
static irqreturn_t tc35815_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct tc35815_local *lp = netdev_priv(dev);
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
#ifdef TC35815_NAPI
|
|
u32 dmactl = tc_readl(&tr->DMA_Ctl);
|
|
|
|
if (!(dmactl & DMA_IntMask)) {
|
|
/* disable interrupts */
|
|
tc_writel(dmactl | DMA_IntMask, &tr->DMA_Ctl);
|
|
if (netif_rx_schedule_prep(dev, &lp->napi))
|
|
__netif_rx_schedule(dev, &lp->napi);
|
|
else {
|
|
printk(KERN_ERR "%s: interrupt taken in poll\n",
|
|
dev->name);
|
|
BUG();
|
|
}
|
|
(void)tc_readl(&tr->Int_Src); /* flush */
|
|
return IRQ_HANDLED;
|
|
}
|
|
return IRQ_NONE;
|
|
#else
|
|
int handled;
|
|
u32 status;
|
|
|
|
spin_lock(&lp->lock);
|
|
status = tc_readl(&tr->Int_Src);
|
|
tc_writel(status, &tr->Int_Src); /* write to clear */
|
|
handled = tc35815_do_interrupt(dev, status);
|
|
(void)tc_readl(&tr->Int_Src); /* flush */
|
|
spin_unlock(&lp->lock);
|
|
return IRQ_RETVAL(handled >= 0);
|
|
#endif /* TC35815_NAPI */
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void tc35815_poll_controller(struct net_device *dev)
|
|
{
|
|
disable_irq(dev->irq);
|
|
tc35815_interrupt(dev->irq, dev);
|
|
enable_irq(dev->irq);
|
|
}
|
|
#endif
|
|
|
|
/* We have a good packet(s), get it/them out of the buffers. */
|
|
#ifdef TC35815_NAPI
|
|
static int
|
|
tc35815_rx(struct net_device *dev, int limit)
|
|
#else
|
|
static void
|
|
tc35815_rx(struct net_device *dev)
|
|
#endif
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
unsigned int fdctl;
|
|
int i;
|
|
int buf_free_count = 0;
|
|
int fd_free_count = 0;
|
|
#ifdef TC35815_NAPI
|
|
int received = 0;
|
|
#endif
|
|
|
|
while (!((fdctl = le32_to_cpu(lp->rfd_cur->fd.FDCtl)) & FD_CownsFD)) {
|
|
int status = le32_to_cpu(lp->rfd_cur->fd.FDStat);
|
|
int pkt_len = fdctl & FD_FDLength_MASK;
|
|
int bd_count = (fdctl & FD_BDCnt_MASK) >> FD_BDCnt_SHIFT;
|
|
#ifdef DEBUG
|
|
struct RxFD *next_rfd;
|
|
#endif
|
|
#if (RX_CTL_CMD & Rx_StripCRC) == 0
|
|
pkt_len -= 4;
|
|
#endif
|
|
|
|
if (netif_msg_rx_status(lp))
|
|
dump_rxfd(lp->rfd_cur);
|
|
if (status & Rx_Good) {
|
|
struct sk_buff *skb;
|
|
unsigned char *data;
|
|
int cur_bd;
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
int offset;
|
|
#endif
|
|
|
|
#ifdef TC35815_NAPI
|
|
if (--limit < 0)
|
|
break;
|
|
#endif
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
BUG_ON(bd_count > 2);
|
|
skb = dev_alloc_skb(pkt_len + 2); /* +2: for reserve */
|
|
if (skb == NULL) {
|
|
printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n",
|
|
dev->name);
|
|
lp->stats.rx_dropped++;
|
|
break;
|
|
}
|
|
skb_reserve(skb, 2); /* 16 bit alignment */
|
|
|
|
data = skb_put(skb, pkt_len);
|
|
|
|
/* copy from receive buffer */
|
|
cur_bd = 0;
|
|
offset = 0;
|
|
while (offset < pkt_len && cur_bd < bd_count) {
|
|
int len = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BDCtl) &
|
|
BD_BuffLength_MASK;
|
|
dma_addr_t dma = le32_to_cpu(lp->rfd_cur->bd[cur_bd].BuffData);
|
|
void *rxbuf = rxbuf_bus_to_virt(lp, dma);
|
|
if (offset + len > pkt_len)
|
|
len = pkt_len - offset;
|
|
#ifdef TC35815_DMA_SYNC_ONDEMAND
|
|
pci_dma_sync_single_for_cpu(lp->pci_dev,
|
|
dma, len,
|
|
PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
memcpy(data + offset, rxbuf, len);
|
|
#ifdef TC35815_DMA_SYNC_ONDEMAND
|
|
pci_dma_sync_single_for_device(lp->pci_dev,
|
|
dma, len,
|
|
PCI_DMA_FROMDEVICE);
|
|
#endif
|
|
offset += len;
|
|
cur_bd++;
|
|
}
|
|
#else /* TC35815_USE_PACKEDBUFFER */
|
|
BUG_ON(bd_count > 1);
|
|
cur_bd = (le32_to_cpu(lp->rfd_cur->bd[0].BDCtl)
|
|
& BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
|
|
#ifdef DEBUG
|
|
if (cur_bd >= RX_BUF_NUM) {
|
|
printk("%s: invalid BDID.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
BUG_ON(lp->rx_skbs[cur_bd].skb_dma !=
|
|
(le32_to_cpu(lp->rfd_cur->bd[0].BuffData) & ~3));
|
|
if (!lp->rx_skbs[cur_bd].skb) {
|
|
printk("%s: NULL skb.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(cur_bd >= RX_BUF_NUM);
|
|
#endif
|
|
skb = lp->rx_skbs[cur_bd].skb;
|
|
prefetch(skb->data);
|
|
lp->rx_skbs[cur_bd].skb = NULL;
|
|
lp->fbl_count--;
|
|
pci_unmap_single(lp->pci_dev,
|
|
lp->rx_skbs[cur_bd].skb_dma,
|
|
RX_BUF_SIZE, PCI_DMA_FROMDEVICE);
|
|
if (!HAVE_DMA_RXALIGN(lp))
|
|
memmove(skb->data, skb->data - 2, pkt_len);
|
|
data = skb_put(skb, pkt_len);
|
|
#endif /* TC35815_USE_PACKEDBUFFER */
|
|
if (netif_msg_pktdata(lp))
|
|
print_eth(data);
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
#ifdef TC35815_NAPI
|
|
netif_receive_skb(skb);
|
|
received++;
|
|
#else
|
|
netif_rx(skb);
|
|
#endif
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += pkt_len;
|
|
} else {
|
|
lp->stats.rx_errors++;
|
|
printk(KERN_DEBUG "%s: Rx error (status %x)\n",
|
|
dev->name, status & Rx_Stat_Mask);
|
|
/* WORKAROUND: LongErr and CRCErr means Overflow. */
|
|
if ((status & Rx_LongErr) && (status & Rx_CRCErr)) {
|
|
status &= ~(Rx_LongErr|Rx_CRCErr);
|
|
status |= Rx_Over;
|
|
}
|
|
if (status & Rx_LongErr) lp->stats.rx_length_errors++;
|
|
if (status & Rx_Over) lp->stats.rx_fifo_errors++;
|
|
if (status & Rx_CRCErr) lp->stats.rx_crc_errors++;
|
|
if (status & Rx_Align) lp->stats.rx_frame_errors++;
|
|
}
|
|
|
|
if (bd_count > 0) {
|
|
/* put Free Buffer back to controller */
|
|
int bdctl = le32_to_cpu(lp->rfd_cur->bd[bd_count - 1].BDCtl);
|
|
unsigned char id =
|
|
(bdctl & BD_RxBDID_MASK) >> BD_RxBDID_SHIFT;
|
|
#ifdef DEBUG
|
|
if (id >= RX_BUF_NUM) {
|
|
printk("%s: invalid BDID.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(id >= RX_BUF_NUM);
|
|
#endif
|
|
/* free old buffers */
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
while (lp->fbl_curid != id)
|
|
#else
|
|
while (lp->fbl_count < RX_BUF_NUM)
|
|
#endif
|
|
{
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
unsigned char curid = lp->fbl_curid;
|
|
#else
|
|
unsigned char curid =
|
|
(id + 1 + lp->fbl_count) % RX_BUF_NUM;
|
|
#endif
|
|
struct BDesc *bd = &lp->fbl_ptr->bd[curid];
|
|
#ifdef DEBUG
|
|
bdctl = le32_to_cpu(bd->BDCtl);
|
|
if (bdctl & BD_CownsBD) {
|
|
printk("%s: Freeing invalid BD.\n",
|
|
dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#endif
|
|
/* pass BD to controller */
|
|
#ifndef TC35815_USE_PACKEDBUFFER
|
|
if (!lp->rx_skbs[curid].skb) {
|
|
lp->rx_skbs[curid].skb =
|
|
alloc_rxbuf_skb(dev,
|
|
lp->pci_dev,
|
|
&lp->rx_skbs[curid].skb_dma);
|
|
if (!lp->rx_skbs[curid].skb)
|
|
break; /* try on next reception */
|
|
bd->BuffData = cpu_to_le32(lp->rx_skbs[curid].skb_dma);
|
|
}
|
|
#endif /* TC35815_USE_PACKEDBUFFER */
|
|
/* Note: BDLength was modified by chip. */
|
|
bd->BDCtl = cpu_to_le32(BD_CownsBD |
|
|
(curid << BD_RxBDID_SHIFT) |
|
|
RX_BUF_SIZE);
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
lp->fbl_curid = (curid + 1) % RX_BUF_NUM;
|
|
if (netif_msg_rx_status(lp)) {
|
|
printk("%s: Entering new FBD %d\n",
|
|
dev->name, lp->fbl_curid);
|
|
dump_frfd(lp->fbl_ptr);
|
|
}
|
|
#else
|
|
lp->fbl_count++;
|
|
#endif
|
|
buf_free_count++;
|
|
}
|
|
}
|
|
|
|
/* put RxFD back to controller */
|
|
#ifdef DEBUG
|
|
next_rfd = fd_bus_to_virt(lp,
|
|
le32_to_cpu(lp->rfd_cur->fd.FDNext));
|
|
if (next_rfd < lp->rfd_base || next_rfd > lp->rfd_limit) {
|
|
printk("%s: RxFD FDNext invalid.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#endif
|
|
for (i = 0; i < (bd_count + 1) / 2 + 1; i++) {
|
|
/* pass FD to controller */
|
|
#ifdef DEBUG
|
|
lp->rfd_cur->fd.FDNext = cpu_to_le32(0xdeaddead);
|
|
#else
|
|
lp->rfd_cur->fd.FDNext = cpu_to_le32(FD_Next_EOL);
|
|
#endif
|
|
lp->rfd_cur->fd.FDCtl = cpu_to_le32(FD_CownsFD);
|
|
lp->rfd_cur++;
|
|
fd_free_count++;
|
|
}
|
|
if (lp->rfd_cur > lp->rfd_limit)
|
|
lp->rfd_cur = lp->rfd_base;
|
|
#ifdef DEBUG
|
|
if (lp->rfd_cur != next_rfd)
|
|
printk("rfd_cur = %p, next_rfd %p\n",
|
|
lp->rfd_cur, next_rfd);
|
|
#endif
|
|
}
|
|
|
|
/* re-enable BL/FDA Exhaust interrupts. */
|
|
if (fd_free_count) {
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
u32 en, en_old = tc_readl(&tr->Int_En);
|
|
en = en_old | Int_FDAExEn;
|
|
if (buf_free_count)
|
|
en |= Int_BLExEn;
|
|
if (en != en_old)
|
|
tc_writel(en, &tr->Int_En);
|
|
}
|
|
#ifdef TC35815_NAPI
|
|
return received;
|
|
#endif
|
|
}
|
|
|
|
#ifdef TC35815_NAPI
|
|
static int tc35815_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct tc35815_local *lp = container_of(napi, struct tc35815_local, napi);
|
|
struct net_device *dev = lp->dev;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int received = 0, handled;
|
|
u32 status;
|
|
|
|
spin_lock(&lp->lock);
|
|
status = tc_readl(&tr->Int_Src);
|
|
do {
|
|
tc_writel(status, &tr->Int_Src); /* write to clear */
|
|
|
|
handled = tc35815_do_interrupt(dev, status, limit);
|
|
if (handled >= 0) {
|
|
received += handled;
|
|
if (received >= budget)
|
|
break;
|
|
}
|
|
status = tc_readl(&tr->Int_Src);
|
|
} while (status);
|
|
spin_unlock(&lp->lock);
|
|
|
|
if (received < budget) {
|
|
netif_rx_complete(dev, napi);
|
|
/* enable interrupts */
|
|
tc_writel(tc_readl(&tr->DMA_Ctl) & ~DMA_IntMask, &tr->DMA_Ctl);
|
|
}
|
|
return received;
|
|
}
|
|
#endif
|
|
|
|
#ifdef NO_CHECK_CARRIER
|
|
#define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_LateColl|Tx_TxPar|Tx_SQErr)
|
|
#else
|
|
#define TX_STA_ERR (Tx_ExColl|Tx_Under|Tx_Defer|Tx_NCarr|Tx_LateColl|Tx_TxPar|Tx_SQErr)
|
|
#endif
|
|
|
|
static void
|
|
tc35815_check_tx_stat(struct net_device *dev, int status)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
const char *msg = NULL;
|
|
|
|
/* count collisions */
|
|
if (status & Tx_ExColl)
|
|
lp->stats.collisions += 16;
|
|
if (status & Tx_TxColl_MASK)
|
|
lp->stats.collisions += status & Tx_TxColl_MASK;
|
|
|
|
#ifndef NO_CHECK_CARRIER
|
|
/* TX4939 does not have NCarr */
|
|
if (lp->boardtype == TC35815_TX4939)
|
|
status &= ~Tx_NCarr;
|
|
#ifdef WORKAROUND_LOSTCAR
|
|
/* WORKAROUND: ignore LostCrS in full duplex operation */
|
|
if ((lp->timer_state != asleep && lp->timer_state != lcheck)
|
|
|| lp->fullduplex)
|
|
status &= ~Tx_NCarr;
|
|
#endif
|
|
#endif
|
|
|
|
if (!(status & TX_STA_ERR)) {
|
|
/* no error. */
|
|
lp->stats.tx_packets++;
|
|
return;
|
|
}
|
|
|
|
lp->stats.tx_errors++;
|
|
if (status & Tx_ExColl) {
|
|
lp->stats.tx_aborted_errors++;
|
|
msg = "Excessive Collision.";
|
|
}
|
|
if (status & Tx_Under) {
|
|
lp->stats.tx_fifo_errors++;
|
|
msg = "Tx FIFO Underrun.";
|
|
if (lp->lstats.tx_underrun < TX_THRESHOLD_KEEP_LIMIT) {
|
|
lp->lstats.tx_underrun++;
|
|
if (lp->lstats.tx_underrun >= TX_THRESHOLD_KEEP_LIMIT) {
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
tc_writel(TX_THRESHOLD_MAX, &tr->TxThrsh);
|
|
msg = "Tx FIFO Underrun.Change Tx threshold to max.";
|
|
}
|
|
}
|
|
}
|
|
if (status & Tx_Defer) {
|
|
lp->stats.tx_fifo_errors++;
|
|
msg = "Excessive Deferral.";
|
|
}
|
|
#ifndef NO_CHECK_CARRIER
|
|
if (status & Tx_NCarr) {
|
|
lp->stats.tx_carrier_errors++;
|
|
msg = "Lost Carrier Sense.";
|
|
}
|
|
#endif
|
|
if (status & Tx_LateColl) {
|
|
lp->stats.tx_aborted_errors++;
|
|
msg = "Late Collision.";
|
|
}
|
|
if (status & Tx_TxPar) {
|
|
lp->stats.tx_fifo_errors++;
|
|
msg = "Transmit Parity Error.";
|
|
}
|
|
if (status & Tx_SQErr) {
|
|
lp->stats.tx_heartbeat_errors++;
|
|
msg = "Signal Quality Error.";
|
|
}
|
|
if (msg && netif_msg_tx_err(lp))
|
|
printk(KERN_WARNING "%s: %s (%#x)\n", dev->name, msg, status);
|
|
}
|
|
|
|
/* This handles TX complete events posted by the device
|
|
* via interrupts.
|
|
*/
|
|
static void
|
|
tc35815_txdone(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct TxFD *txfd;
|
|
unsigned int fdctl;
|
|
|
|
txfd = &lp->tfd_base[lp->tfd_end];
|
|
while (lp->tfd_start != lp->tfd_end &&
|
|
!((fdctl = le32_to_cpu(txfd->fd.FDCtl)) & FD_CownsFD)) {
|
|
int status = le32_to_cpu(txfd->fd.FDStat);
|
|
struct sk_buff *skb;
|
|
unsigned long fdnext = le32_to_cpu(txfd->fd.FDNext);
|
|
u32 fdsystem = le32_to_cpu(txfd->fd.FDSystem);
|
|
|
|
if (netif_msg_tx_done(lp)) {
|
|
printk("%s: complete TxFD.\n", dev->name);
|
|
dump_txfd(txfd);
|
|
}
|
|
tc35815_check_tx_stat(dev, status);
|
|
|
|
skb = fdsystem != 0xffffffff ?
|
|
lp->tx_skbs[fdsystem].skb : NULL;
|
|
#ifdef DEBUG
|
|
if (lp->tx_skbs[lp->tfd_end].skb != skb) {
|
|
printk("%s: tx_skbs mismatch.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#else
|
|
BUG_ON(lp->tx_skbs[lp->tfd_end].skb != skb);
|
|
#endif
|
|
if (skb) {
|
|
lp->stats.tx_bytes += skb->len;
|
|
pci_unmap_single(lp->pci_dev, lp->tx_skbs[lp->tfd_end].skb_dma, skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_skbs[lp->tfd_end].skb = NULL;
|
|
lp->tx_skbs[lp->tfd_end].skb_dma = 0;
|
|
#ifdef TC35815_NAPI
|
|
dev_kfree_skb_any(skb);
|
|
#else
|
|
dev_kfree_skb_irq(skb);
|
|
#endif
|
|
}
|
|
txfd->fd.FDSystem = cpu_to_le32(0xffffffff);
|
|
|
|
lp->tfd_end = (lp->tfd_end + 1) % TX_FD_NUM;
|
|
txfd = &lp->tfd_base[lp->tfd_end];
|
|
#ifdef DEBUG
|
|
if ((fdnext & ~FD_Next_EOL) != fd_virt_to_bus(lp, txfd)) {
|
|
printk("%s: TxFD FDNext invalid.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#endif
|
|
if (fdnext & FD_Next_EOL) {
|
|
/* DMA Transmitter has been stopping... */
|
|
if (lp->tfd_end != lp->tfd_start) {
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int head = (lp->tfd_start + TX_FD_NUM - 1) % TX_FD_NUM;
|
|
struct TxFD* txhead = &lp->tfd_base[head];
|
|
int qlen = (lp->tfd_start + TX_FD_NUM
|
|
- lp->tfd_end) % TX_FD_NUM;
|
|
|
|
#ifdef DEBUG
|
|
if (!(le32_to_cpu(txfd->fd.FDCtl) & FD_CownsFD)) {
|
|
printk("%s: TxFD FDCtl invalid.\n", dev->name);
|
|
panic_queues(dev);
|
|
}
|
|
#endif
|
|
/* log max queue length */
|
|
if (lp->lstats.max_tx_qlen < qlen)
|
|
lp->lstats.max_tx_qlen = qlen;
|
|
|
|
|
|
/* start DMA Transmitter again */
|
|
txhead->fd.FDNext |= cpu_to_le32(FD_Next_EOL);
|
|
#ifdef GATHER_TXINT
|
|
txhead->fd.FDCtl |= cpu_to_le32(FD_FrmOpt_IntTx);
|
|
#endif
|
|
if (netif_msg_tx_queued(lp)) {
|
|
printk("%s: start TxFD on queue.\n",
|
|
dev->name);
|
|
dump_txfd(txfd);
|
|
}
|
|
tc_writel(fd_virt_to_bus(lp, txfd), &tr->TxFrmPtr);
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* If we had stopped the queue due to a "tx full"
|
|
* condition, and space has now been made available,
|
|
* wake up the queue.
|
|
*/
|
|
if (netif_queue_stopped(dev) && ! tc35815_tx_full(dev))
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
/* The inverse routine to tc35815_open(). */
|
|
static int
|
|
tc35815_close(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
|
|
netif_stop_queue(dev);
|
|
#ifdef TC35815_NAPI
|
|
napi_disable(&lp->napi);
|
|
#endif
|
|
|
|
/* Flush the Tx and disable Rx here. */
|
|
|
|
del_timer(&lp->timer); /* Kill if running */
|
|
tc35815_chip_reset(dev);
|
|
free_irq(dev->irq, dev);
|
|
|
|
tc35815_free_queues(dev);
|
|
|
|
return 0;
|
|
|
|
}
|
|
|
|
/*
|
|
* Get the current statistics.
|
|
* This may be called with the card open or closed.
|
|
*/
|
|
static struct net_device_stats *tc35815_get_stats(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
if (netif_running(dev)) {
|
|
/* Update the statistics from the device registers. */
|
|
lp->stats.rx_missed_errors = tc_readl(&tr->Miss_Cnt);
|
|
}
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
static void tc35815_set_cam_entry(struct net_device *dev, int index, unsigned char *addr)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int cam_index = index * 6;
|
|
u32 cam_data;
|
|
u32 saved_addr;
|
|
saved_addr = tc_readl(&tr->CAM_Adr);
|
|
|
|
if (netif_msg_hw(lp)) {
|
|
int i;
|
|
printk(KERN_DEBUG "%s: CAM %d:", dev->name, index);
|
|
for (i = 0; i < 6; i++)
|
|
printk(" %02x", addr[i]);
|
|
printk("\n");
|
|
}
|
|
if (index & 1) {
|
|
/* read modify write */
|
|
tc_writel(cam_index - 2, &tr->CAM_Adr);
|
|
cam_data = tc_readl(&tr->CAM_Data) & 0xffff0000;
|
|
cam_data |= addr[0] << 8 | addr[1];
|
|
tc_writel(cam_data, &tr->CAM_Data);
|
|
/* write whole word */
|
|
tc_writel(cam_index + 2, &tr->CAM_Adr);
|
|
cam_data = (addr[2] << 24) | (addr[3] << 16) | (addr[4] << 8) | addr[5];
|
|
tc_writel(cam_data, &tr->CAM_Data);
|
|
} else {
|
|
/* write whole word */
|
|
tc_writel(cam_index, &tr->CAM_Adr);
|
|
cam_data = (addr[0] << 24) | (addr[1] << 16) | (addr[2] << 8) | addr[3];
|
|
tc_writel(cam_data, &tr->CAM_Data);
|
|
/* read modify write */
|
|
tc_writel(cam_index + 4, &tr->CAM_Adr);
|
|
cam_data = tc_readl(&tr->CAM_Data) & 0x0000ffff;
|
|
cam_data |= addr[4] << 24 | (addr[5] << 16);
|
|
tc_writel(cam_data, &tr->CAM_Data);
|
|
}
|
|
|
|
tc_writel(saved_addr, &tr->CAM_Adr);
|
|
}
|
|
|
|
|
|
/*
|
|
* Set or clear the multicast filter for this adaptor.
|
|
* num_addrs == -1 Promiscuous mode, receive all packets
|
|
* num_addrs == 0 Normal mode, clear multicast list
|
|
* num_addrs > 0 Multicast mode, receive normal and MC packets,
|
|
* and do best-effort filtering.
|
|
*/
|
|
static void
|
|
tc35815_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
|
|
if (dev->flags&IFF_PROMISC)
|
|
{
|
|
#ifdef WORKAROUND_100HALF_PROMISC
|
|
/* With some (all?) 100MHalf HUB, controller will hang
|
|
* if we enabled promiscuous mode before linkup... */
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
if (!(tc_mdio_read(dev, pid, MII_BMSR) & BMSR_LSTATUS))
|
|
return;
|
|
#endif
|
|
/* Enable promiscuous mode */
|
|
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc | CAM_StationAcc, &tr->CAM_Ctl);
|
|
}
|
|
else if((dev->flags&IFF_ALLMULTI) || dev->mc_count > CAM_ENTRY_MAX - 3)
|
|
{
|
|
/* CAM 0, 1, 20 are reserved. */
|
|
/* Disable promiscuous mode, use normal mode. */
|
|
tc_writel(CAM_CompEn | CAM_BroadAcc | CAM_GroupAcc, &tr->CAM_Ctl);
|
|
}
|
|
else if(dev->mc_count)
|
|
{
|
|
struct dev_mc_list* cur_addr = dev->mc_list;
|
|
int i;
|
|
int ena_bits = CAM_Ena_Bit(CAM_ENTRY_SOURCE);
|
|
|
|
tc_writel(0, &tr->CAM_Ctl);
|
|
/* Walk the address list, and load the filter */
|
|
for (i = 0; i < dev->mc_count; i++, cur_addr = cur_addr->next) {
|
|
if (!cur_addr)
|
|
break;
|
|
/* entry 0,1 is reserved. */
|
|
tc35815_set_cam_entry(dev, i + 2, cur_addr->dmi_addr);
|
|
ena_bits |= CAM_Ena_Bit(i + 2);
|
|
}
|
|
tc_writel(ena_bits, &tr->CAM_Ena);
|
|
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
|
|
}
|
|
else {
|
|
tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
|
|
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
|
|
}
|
|
}
|
|
|
|
static void tc35815_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
strcpy(info->driver, MODNAME);
|
|
strcpy(info->version, DRV_VERSION);
|
|
strcpy(info->bus_info, pci_name(lp->pci_dev));
|
|
}
|
|
|
|
static int tc35815_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
spin_lock_irq(&lp->lock);
|
|
mii_ethtool_gset(&lp->mii, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int tc35815_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int rc;
|
|
#if 1 /* use our negotiation method... */
|
|
/* Verify the settings we care about. */
|
|
if (cmd->autoneg != AUTONEG_ENABLE &&
|
|
cmd->autoneg != AUTONEG_DISABLE)
|
|
return -EINVAL;
|
|
if (cmd->autoneg == AUTONEG_DISABLE &&
|
|
((cmd->speed != SPEED_100 &&
|
|
cmd->speed != SPEED_10) ||
|
|
(cmd->duplex != DUPLEX_HALF &&
|
|
cmd->duplex != DUPLEX_FULL)))
|
|
return -EINVAL;
|
|
|
|
/* Ok, do it to it. */
|
|
spin_lock_irq(&lp->lock);
|
|
del_timer(&lp->timer);
|
|
tc35815_start_auto_negotiation(dev, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
rc = 0;
|
|
#else
|
|
spin_lock_irq(&lp->lock);
|
|
rc = mii_ethtool_sset(&lp->mii, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
#endif
|
|
return rc;
|
|
}
|
|
|
|
static int tc35815_nway_reset(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int rc;
|
|
spin_lock_irq(&lp->lock);
|
|
rc = mii_nway_restart(&lp->mii);
|
|
spin_unlock_irq(&lp->lock);
|
|
return rc;
|
|
}
|
|
|
|
static u32 tc35815_get_link(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int rc;
|
|
spin_lock_irq(&lp->lock);
|
|
rc = mii_link_ok(&lp->mii);
|
|
spin_unlock_irq(&lp->lock);
|
|
return rc;
|
|
}
|
|
|
|
static u32 tc35815_get_msglevel(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
return lp->msg_enable;
|
|
}
|
|
|
|
static void tc35815_set_msglevel(struct net_device *dev, u32 datum)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
lp->msg_enable = datum;
|
|
}
|
|
|
|
static int tc35815_get_sset_count(struct net_device *dev, int sset)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
|
|
switch (sset) {
|
|
case ETH_SS_STATS:
|
|
return sizeof(lp->lstats) / sizeof(int);
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
}
|
|
|
|
static void tc35815_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *stats, u64 *data)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
data[0] = lp->lstats.max_tx_qlen;
|
|
data[1] = lp->lstats.tx_ints;
|
|
data[2] = lp->lstats.rx_ints;
|
|
data[3] = lp->lstats.tx_underrun;
|
|
}
|
|
|
|
static struct {
|
|
const char str[ETH_GSTRING_LEN];
|
|
} ethtool_stats_keys[] = {
|
|
{ "max_tx_qlen" },
|
|
{ "tx_ints" },
|
|
{ "rx_ints" },
|
|
{ "tx_underrun" },
|
|
};
|
|
|
|
static void tc35815_get_strings(struct net_device *dev, u32 stringset, u8 *data)
|
|
{
|
|
memcpy(data, ethtool_stats_keys, sizeof(ethtool_stats_keys));
|
|
}
|
|
|
|
static const struct ethtool_ops tc35815_ethtool_ops = {
|
|
.get_drvinfo = tc35815_get_drvinfo,
|
|
.get_settings = tc35815_get_settings,
|
|
.set_settings = tc35815_set_settings,
|
|
.nway_reset = tc35815_nway_reset,
|
|
.get_link = tc35815_get_link,
|
|
.get_msglevel = tc35815_get_msglevel,
|
|
.set_msglevel = tc35815_set_msglevel,
|
|
.get_strings = tc35815_get_strings,
|
|
.get_sset_count = tc35815_get_sset_count,
|
|
.get_ethtool_stats = tc35815_get_ethtool_stats,
|
|
};
|
|
|
|
static int tc35815_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int rc;
|
|
|
|
if (!netif_running(dev))
|
|
return -EINVAL;
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
rc = generic_mii_ioctl(&lp->mii, if_mii(rq), cmd, NULL);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return rc;
|
|
}
|
|
|
|
static int tc_mdio_read(struct net_device *dev, int phy_id, int location)
|
|
{
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
u32 data;
|
|
tc_writel(MD_CA_Busy | (phy_id << 5) | location, &tr->MD_CA);
|
|
while (tc_readl(&tr->MD_CA) & MD_CA_Busy)
|
|
;
|
|
data = tc_readl(&tr->MD_Data);
|
|
return data & 0xffff;
|
|
}
|
|
|
|
static void tc_mdio_write(struct net_device *dev, int phy_id, int location,
|
|
int val)
|
|
{
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
tc_writel(val, &tr->MD_Data);
|
|
tc_writel(MD_CA_Busy | MD_CA_Wr | (phy_id << 5) | location, &tr->MD_CA);
|
|
while (tc_readl(&tr->MD_CA) & MD_CA_Busy)
|
|
;
|
|
}
|
|
|
|
/* Auto negotiation. The scheme is very simple. We have a timer routine
|
|
* that keeps watching the auto negotiation process as it progresses.
|
|
* The DP83840 is first told to start doing it's thing, we set up the time
|
|
* and place the timer state machine in it's initial state.
|
|
*
|
|
* Here the timer peeks at the DP83840 status registers at each click to see
|
|
* if the auto negotiation has completed, we assume here that the DP83840 PHY
|
|
* will time out at some point and just tell us what (didn't) happen. For
|
|
* complete coverage we only allow so many of the ticks at this level to run,
|
|
* when this has expired we print a warning message and try another strategy.
|
|
* This "other" strategy is to force the interface into various speed/duplex
|
|
* configurations and we stop when we see a link-up condition before the
|
|
* maximum number of "peek" ticks have occurred.
|
|
*
|
|
* Once a valid link status has been detected we configure the BigMAC and
|
|
* the rest of the Happy Meal to speak the most efficient protocol we could
|
|
* get a clean link for. The priority for link configurations, highest first
|
|
* is:
|
|
* 100 Base-T Full Duplex
|
|
* 100 Base-T Half Duplex
|
|
* 10 Base-T Full Duplex
|
|
* 10 Base-T Half Duplex
|
|
*
|
|
* We start a new timer now, after a successful auto negotiation status has
|
|
* been detected. This timer just waits for the link-up bit to get set in
|
|
* the BMCR of the DP83840. When this occurs we print a kernel log message
|
|
* describing the link type in use and the fact that it is up.
|
|
*
|
|
* If a fatal error of some sort is signalled and detected in the interrupt
|
|
* service routine, and the chip is reset, or the link is ifconfig'd down
|
|
* and then back up, this entire process repeats itself all over again.
|
|
*/
|
|
/* Note: Above comments are come from sunhme driver. */
|
|
|
|
static int tc35815_try_next_permutation(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmcr;
|
|
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
|
|
/* Downgrade from full to half duplex. Only possible via ethtool. */
|
|
if (bmcr & BMCR_FULLDPLX) {
|
|
bmcr &= ~BMCR_FULLDPLX;
|
|
printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr);
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
return 0;
|
|
}
|
|
|
|
/* Downgrade from 100 to 10. */
|
|
if (bmcr & BMCR_SPEED100) {
|
|
bmcr &= ~BMCR_SPEED100;
|
|
printk(KERN_DEBUG "%s: try next permutation (BMCR %x)\n", dev->name, bmcr);
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
return 0;
|
|
}
|
|
|
|
/* We've tried everything. */
|
|
return -1;
|
|
}
|
|
|
|
static void
|
|
tc35815_display_link_mode(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short lpa, bmcr;
|
|
char *speed = "", *duplex = "";
|
|
|
|
lpa = tc_mdio_read(dev, pid, MII_LPA);
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL)))
|
|
speed = "100Mb/s";
|
|
else
|
|
speed = "10Mb/s";
|
|
if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL)))
|
|
duplex = "Full Duplex";
|
|
else
|
|
duplex = "Half Duplex";
|
|
|
|
if (netif_msg_link(lp))
|
|
printk(KERN_INFO "%s: Link is up at %s, %s.\n",
|
|
dev->name, speed, duplex);
|
|
printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
|
|
dev->name,
|
|
bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa);
|
|
}
|
|
|
|
static void tc35815_display_forced_link_mode(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmcr;
|
|
char *speed = "", *duplex = "";
|
|
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (bmcr & BMCR_SPEED100)
|
|
speed = "100Mb/s";
|
|
else
|
|
speed = "10Mb/s";
|
|
if (bmcr & BMCR_FULLDPLX)
|
|
duplex = "Full Duplex.\n";
|
|
else
|
|
duplex = "Half Duplex.\n";
|
|
|
|
if (netif_msg_link(lp))
|
|
printk(KERN_INFO "%s: Link has been forced up at %s, %s",
|
|
dev->name, speed, duplex);
|
|
}
|
|
|
|
static void tc35815_set_link_modes(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmcr, lpa;
|
|
int speed;
|
|
|
|
if (lp->timer_state == arbwait) {
|
|
lpa = tc_mdio_read(dev, pid, MII_LPA);
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
printk(KERN_DEBUG "%s: MII BMCR %04x BMSR %04x LPA %04x\n",
|
|
dev->name,
|
|
bmcr, tc_mdio_read(dev, pid, MII_BMSR), lpa);
|
|
if (!(lpa & (LPA_10HALF | LPA_10FULL |
|
|
LPA_100HALF | LPA_100FULL))) {
|
|
/* fall back to 10HALF */
|
|
printk(KERN_INFO "%s: bad ability %04x - falling back to 10HD.\n",
|
|
dev->name, lpa);
|
|
lpa = LPA_10HALF;
|
|
}
|
|
if (options.duplex ? (bmcr & BMCR_FULLDPLX) : (lpa & (LPA_100FULL | LPA_10FULL)))
|
|
lp->fullduplex = 1;
|
|
else
|
|
lp->fullduplex = 0;
|
|
if (options.speed ? (bmcr & BMCR_SPEED100) : (lpa & (LPA_100HALF | LPA_100FULL)))
|
|
speed = 100;
|
|
else
|
|
speed = 10;
|
|
} else {
|
|
/* Forcing a link mode. */
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (bmcr & BMCR_FULLDPLX)
|
|
lp->fullduplex = 1;
|
|
else
|
|
lp->fullduplex = 0;
|
|
if (bmcr & BMCR_SPEED100)
|
|
speed = 100;
|
|
else
|
|
speed = 10;
|
|
}
|
|
|
|
tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_HaltReq, &tr->MAC_Ctl);
|
|
if (lp->fullduplex) {
|
|
tc_writel(tc_readl(&tr->MAC_Ctl) | MAC_FullDup, &tr->MAC_Ctl);
|
|
} else {
|
|
tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_FullDup, &tr->MAC_Ctl);
|
|
}
|
|
tc_writel(tc_readl(&tr->MAC_Ctl) & ~MAC_HaltReq, &tr->MAC_Ctl);
|
|
|
|
/* TX4939 PCFG.SPEEDn bit will be changed on NETDEV_CHANGE event. */
|
|
|
|
#ifndef NO_CHECK_CARRIER
|
|
/* TX4939 does not have EnLCarr */
|
|
if (lp->boardtype != TC35815_TX4939) {
|
|
#ifdef WORKAROUND_LOSTCAR
|
|
/* WORKAROUND: enable LostCrS only if half duplex operation */
|
|
if (!lp->fullduplex && lp->boardtype != TC35815_TX4939)
|
|
tc_writel(tc_readl(&tr->Tx_Ctl) | Tx_EnLCarr, &tr->Tx_Ctl);
|
|
#endif
|
|
}
|
|
#endif
|
|
lp->mii.full_duplex = lp->fullduplex;
|
|
}
|
|
|
|
static void tc35815_timer(unsigned long data)
|
|
{
|
|
struct net_device *dev = (struct net_device *)data;
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmsr, bmcr, lpa;
|
|
int restart_timer = 0;
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
lp->timer_ticks++;
|
|
switch (lp->timer_state) {
|
|
case arbwait:
|
|
/*
|
|
* Only allow for 5 ticks, thats 10 seconds and much too
|
|
* long to wait for arbitration to complete.
|
|
*/
|
|
/* TC35815 need more times... */
|
|
if (lp->timer_ticks >= 10) {
|
|
/* Enter force mode. */
|
|
if (!options.doforce) {
|
|
printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful,"
|
|
" cable probblem?\n", dev->name);
|
|
/* Try to restart the adaptor. */
|
|
tc35815_restart(dev);
|
|
goto out;
|
|
}
|
|
printk(KERN_NOTICE "%s: Auto-Negotiation unsuccessful,"
|
|
" trying force link mode\n", dev->name);
|
|
printk(KERN_DEBUG "%s: BMCR %x BMSR %x\n", dev->name,
|
|
tc_mdio_read(dev, pid, MII_BMCR),
|
|
tc_mdio_read(dev, pid, MII_BMSR));
|
|
bmcr = BMCR_SPEED100;
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
|
|
/*
|
|
* OK, seems we need do disable the transceiver
|
|
* for the first tick to make sure we get an
|
|
* accurate link state at the second tick.
|
|
*/
|
|
|
|
lp->timer_state = ltrywait;
|
|
lp->timer_ticks = 0;
|
|
restart_timer = 1;
|
|
} else {
|
|
/* Anything interesting happen? */
|
|
bmsr = tc_mdio_read(dev, pid, MII_BMSR);
|
|
if (bmsr & BMSR_ANEGCOMPLETE) {
|
|
/* Just what we've been waiting for... */
|
|
tc35815_set_link_modes(dev);
|
|
|
|
/*
|
|
* Success, at least so far, advance our state
|
|
* engine.
|
|
*/
|
|
lp->timer_state = lupwait;
|
|
restart_timer = 1;
|
|
} else {
|
|
restart_timer = 1;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case lupwait:
|
|
/*
|
|
* Auto negotiation was successful and we are awaiting a
|
|
* link up status. I have decided to let this timer run
|
|
* forever until some sort of error is signalled, reporting
|
|
* a message to the user at 10 second intervals.
|
|
*/
|
|
bmsr = tc_mdio_read(dev, pid, MII_BMSR);
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
/*
|
|
* Wheee, it's up, display the link mode in use and put
|
|
* the timer to sleep.
|
|
*/
|
|
tc35815_display_link_mode(dev);
|
|
netif_carrier_on(dev);
|
|
#ifdef WORKAROUND_100HALF_PROMISC
|
|
/* delayed promiscuous enabling */
|
|
if (dev->flags & IFF_PROMISC)
|
|
tc35815_set_multicast_list(dev);
|
|
#endif
|
|
#if 1
|
|
lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA);
|
|
lp->timer_state = lcheck;
|
|
restart_timer = 1;
|
|
#else
|
|
lp->timer_state = asleep;
|
|
restart_timer = 0;
|
|
#endif
|
|
} else {
|
|
if (lp->timer_ticks >= 10) {
|
|
printk(KERN_NOTICE "%s: Auto negotiation successful, link still "
|
|
"not completely up.\n", dev->name);
|
|
lp->timer_ticks = 0;
|
|
restart_timer = 1;
|
|
} else {
|
|
restart_timer = 1;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case ltrywait:
|
|
/*
|
|
* Making the timeout here too long can make it take
|
|
* annoyingly long to attempt all of the link mode
|
|
* permutations, but then again this is essentially
|
|
* error recovery code for the most part.
|
|
*/
|
|
bmsr = tc_mdio_read(dev, pid, MII_BMSR);
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (lp->timer_ticks == 1) {
|
|
/*
|
|
* Re-enable transceiver, we'll re-enable the
|
|
* transceiver next tick, then check link state
|
|
* on the following tick.
|
|
*/
|
|
restart_timer = 1;
|
|
break;
|
|
}
|
|
if (lp->timer_ticks == 2) {
|
|
restart_timer = 1;
|
|
break;
|
|
}
|
|
if (bmsr & BMSR_LSTATUS) {
|
|
/* Force mode selection success. */
|
|
tc35815_display_forced_link_mode(dev);
|
|
netif_carrier_on(dev);
|
|
tc35815_set_link_modes(dev);
|
|
#ifdef WORKAROUND_100HALF_PROMISC
|
|
/* delayed promiscuous enabling */
|
|
if (dev->flags & IFF_PROMISC)
|
|
tc35815_set_multicast_list(dev);
|
|
#endif
|
|
#if 1
|
|
lp->saved_lpa = tc_mdio_read(dev, pid, MII_LPA);
|
|
lp->timer_state = lcheck;
|
|
restart_timer = 1;
|
|
#else
|
|
lp->timer_state = asleep;
|
|
restart_timer = 0;
|
|
#endif
|
|
} else {
|
|
if (lp->timer_ticks >= 4) { /* 6 seconds or so... */
|
|
int ret;
|
|
|
|
ret = tc35815_try_next_permutation(dev);
|
|
if (ret == -1) {
|
|
/*
|
|
* Aieee, tried them all, reset the
|
|
* chip and try all over again.
|
|
*/
|
|
printk(KERN_NOTICE "%s: Link down, "
|
|
"cable problem?\n",
|
|
dev->name);
|
|
|
|
/* Try to restart the adaptor. */
|
|
tc35815_restart(dev);
|
|
goto out;
|
|
}
|
|
lp->timer_ticks = 0;
|
|
restart_timer = 1;
|
|
} else {
|
|
restart_timer = 1;
|
|
}
|
|
}
|
|
break;
|
|
|
|
case lcheck:
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
lpa = tc_mdio_read(dev, pid, MII_LPA);
|
|
if (bmcr & (BMCR_PDOWN | BMCR_ISOLATE | BMCR_RESET)) {
|
|
printk(KERN_ERR "%s: PHY down? (BMCR %x)\n", dev->name,
|
|
bmcr);
|
|
} else if ((lp->saved_lpa ^ lpa) &
|
|
(LPA_100FULL|LPA_100HALF|LPA_10FULL|LPA_10HALF)) {
|
|
printk(KERN_NOTICE "%s: link status changed"
|
|
" (BMCR %x LPA %x->%x)\n", dev->name,
|
|
bmcr, lp->saved_lpa, lpa);
|
|
} else {
|
|
/* go on */
|
|
restart_timer = 1;
|
|
break;
|
|
}
|
|
/* Try to restart the adaptor. */
|
|
tc35815_restart(dev);
|
|
goto out;
|
|
|
|
case asleep:
|
|
default:
|
|
/* Can't happens.... */
|
|
printk(KERN_ERR "%s: Aieee, link timer is asleep but we got "
|
|
"one anyways!\n", dev->name);
|
|
restart_timer = 0;
|
|
lp->timer_ticks = 0;
|
|
lp->timer_state = asleep; /* foo on you */
|
|
break;
|
|
}
|
|
|
|
if (restart_timer) {
|
|
lp->timer.expires = jiffies + msecs_to_jiffies(1200);
|
|
add_timer(&lp->timer);
|
|
}
|
|
out:
|
|
spin_unlock_irq(&lp->lock);
|
|
}
|
|
|
|
static void tc35815_start_auto_negotiation(struct net_device *dev,
|
|
struct ethtool_cmd *ep)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmsr, bmcr, advertize;
|
|
int timeout;
|
|
|
|
netif_carrier_off(dev);
|
|
bmsr = tc_mdio_read(dev, pid, MII_BMSR);
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
advertize = tc_mdio_read(dev, pid, MII_ADVERTISE);
|
|
|
|
if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
|
|
if (options.speed || options.duplex) {
|
|
/* Advertise only specified configuration. */
|
|
advertize &= ~(ADVERTISE_10HALF |
|
|
ADVERTISE_10FULL |
|
|
ADVERTISE_100HALF |
|
|
ADVERTISE_100FULL);
|
|
if (options.speed != 10) {
|
|
if (options.duplex != 1)
|
|
advertize |= ADVERTISE_100FULL;
|
|
if (options.duplex != 2)
|
|
advertize |= ADVERTISE_100HALF;
|
|
}
|
|
if (options.speed != 100) {
|
|
if (options.duplex != 1)
|
|
advertize |= ADVERTISE_10FULL;
|
|
if (options.duplex != 2)
|
|
advertize |= ADVERTISE_10HALF;
|
|
}
|
|
if (options.speed == 100)
|
|
bmcr |= BMCR_SPEED100;
|
|
else if (options.speed == 10)
|
|
bmcr &= ~BMCR_SPEED100;
|
|
if (options.duplex == 2)
|
|
bmcr |= BMCR_FULLDPLX;
|
|
else if (options.duplex == 1)
|
|
bmcr &= ~BMCR_FULLDPLX;
|
|
} else {
|
|
/* Advertise everything we can support. */
|
|
if (bmsr & BMSR_10HALF)
|
|
advertize |= ADVERTISE_10HALF;
|
|
else
|
|
advertize &= ~ADVERTISE_10HALF;
|
|
if (bmsr & BMSR_10FULL)
|
|
advertize |= ADVERTISE_10FULL;
|
|
else
|
|
advertize &= ~ADVERTISE_10FULL;
|
|
if (bmsr & BMSR_100HALF)
|
|
advertize |= ADVERTISE_100HALF;
|
|
else
|
|
advertize &= ~ADVERTISE_100HALF;
|
|
if (bmsr & BMSR_100FULL)
|
|
advertize |= ADVERTISE_100FULL;
|
|
else
|
|
advertize &= ~ADVERTISE_100FULL;
|
|
}
|
|
|
|
tc_mdio_write(dev, pid, MII_ADVERTISE, advertize);
|
|
|
|
/* Enable Auto-Negotiation, this is usually on already... */
|
|
bmcr |= BMCR_ANENABLE;
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
|
|
/* Restart it to make sure it is going. */
|
|
bmcr |= BMCR_ANRESTART;
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
printk(KERN_DEBUG "%s: ADVERTISE %x BMCR %x\n", dev->name, advertize, bmcr);
|
|
|
|
/* BMCR_ANRESTART self clears when the process has begun. */
|
|
timeout = 64; /* More than enough. */
|
|
while (--timeout) {
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (!(bmcr & BMCR_ANRESTART))
|
|
break; /* got it. */
|
|
udelay(10);
|
|
}
|
|
if (!timeout) {
|
|
printk(KERN_ERR "%s: TC35815 would not start auto "
|
|
"negotiation BMCR=0x%04x\n",
|
|
dev->name, bmcr);
|
|
printk(KERN_NOTICE "%s: Performing force link "
|
|
"detection.\n", dev->name);
|
|
goto force_link;
|
|
} else {
|
|
printk(KERN_DEBUG "%s: auto negotiation started.\n", dev->name);
|
|
lp->timer_state = arbwait;
|
|
}
|
|
} else {
|
|
force_link:
|
|
/* Force the link up, trying first a particular mode.
|
|
* Either we are here at the request of ethtool or
|
|
* because the Happy Meal would not start to autoneg.
|
|
*/
|
|
|
|
/* Disable auto-negotiation in BMCR, enable the duplex and
|
|
* speed setting, init the timer state machine, and fire it off.
|
|
*/
|
|
if (ep == NULL || ep->autoneg == AUTONEG_ENABLE) {
|
|
bmcr = BMCR_SPEED100;
|
|
} else {
|
|
if (ep->speed == SPEED_100)
|
|
bmcr = BMCR_SPEED100;
|
|
else
|
|
bmcr = 0;
|
|
if (ep->duplex == DUPLEX_FULL)
|
|
bmcr |= BMCR_FULLDPLX;
|
|
}
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr);
|
|
|
|
/* OK, seems we need do disable the transceiver for the first
|
|
* tick to make sure we get an accurate link state at the
|
|
* second tick.
|
|
*/
|
|
lp->timer_state = ltrywait;
|
|
}
|
|
|
|
del_timer(&lp->timer);
|
|
lp->timer_ticks = 0;
|
|
lp->timer.expires = jiffies + msecs_to_jiffies(1200);
|
|
add_timer(&lp->timer);
|
|
}
|
|
|
|
static void tc35815_find_phy(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short id0;
|
|
|
|
/* find MII phy */
|
|
for (pid = 31; pid >= 0; pid--) {
|
|
id0 = tc_mdio_read(dev, pid, MII_BMSR);
|
|
if (id0 != 0xffff && id0 != 0x0000 &&
|
|
(id0 & BMSR_RESV) != (0xffff & BMSR_RESV) /* paranoia? */
|
|
) {
|
|
lp->phy_addr = pid;
|
|
break;
|
|
}
|
|
}
|
|
if (pid < 0) {
|
|
printk(KERN_ERR "%s: No MII Phy found.\n",
|
|
dev->name);
|
|
lp->phy_addr = pid = 0;
|
|
}
|
|
|
|
lp->mii_id[0] = tc_mdio_read(dev, pid, MII_PHYSID1);
|
|
lp->mii_id[1] = tc_mdio_read(dev, pid, MII_PHYSID2);
|
|
if (netif_msg_hw(lp))
|
|
printk(KERN_INFO "%s: PHY(%02x) ID %04x %04x\n", dev->name,
|
|
pid, lp->mii_id[0], lp->mii_id[1]);
|
|
}
|
|
|
|
static void tc35815_phy_chip_init(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
int pid = lp->phy_addr;
|
|
unsigned short bmcr;
|
|
struct ethtool_cmd ecmd, *ep;
|
|
|
|
/* dis-isolate if needed. */
|
|
bmcr = tc_mdio_read(dev, pid, MII_BMCR);
|
|
if (bmcr & BMCR_ISOLATE) {
|
|
int count = 32;
|
|
printk(KERN_DEBUG "%s: unisolating...", dev->name);
|
|
tc_mdio_write(dev, pid, MII_BMCR, bmcr & ~BMCR_ISOLATE);
|
|
while (--count) {
|
|
if (!(tc_mdio_read(dev, pid, MII_BMCR) & BMCR_ISOLATE))
|
|
break;
|
|
udelay(20);
|
|
}
|
|
printk(" %s.\n", count ? "done" : "failed");
|
|
}
|
|
|
|
if (options.speed && options.duplex) {
|
|
ecmd.autoneg = AUTONEG_DISABLE;
|
|
ecmd.speed = options.speed == 10 ? SPEED_10 : SPEED_100;
|
|
ecmd.duplex = options.duplex == 1 ? DUPLEX_HALF : DUPLEX_FULL;
|
|
ep = &ecmd;
|
|
} else {
|
|
ep = NULL;
|
|
}
|
|
tc35815_start_auto_negotiation(dev, ep);
|
|
}
|
|
|
|
static void tc35815_chip_reset(struct net_device *dev)
|
|
{
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
int i;
|
|
/* reset the controller */
|
|
tc_writel(MAC_Reset, &tr->MAC_Ctl);
|
|
udelay(4); /* 3200ns */
|
|
i = 0;
|
|
while (tc_readl(&tr->MAC_Ctl) & MAC_Reset) {
|
|
if (i++ > 100) {
|
|
printk(KERN_ERR "%s: MAC reset failed.\n", dev->name);
|
|
break;
|
|
}
|
|
mdelay(1);
|
|
}
|
|
tc_writel(0, &tr->MAC_Ctl);
|
|
|
|
/* initialize registers to default value */
|
|
tc_writel(0, &tr->DMA_Ctl);
|
|
tc_writel(0, &tr->TxThrsh);
|
|
tc_writel(0, &tr->TxPollCtr);
|
|
tc_writel(0, &tr->RxFragSize);
|
|
tc_writel(0, &tr->Int_En);
|
|
tc_writel(0, &tr->FDA_Bas);
|
|
tc_writel(0, &tr->FDA_Lim);
|
|
tc_writel(0xffffffff, &tr->Int_Src); /* Write 1 to clear */
|
|
tc_writel(0, &tr->CAM_Ctl);
|
|
tc_writel(0, &tr->Tx_Ctl);
|
|
tc_writel(0, &tr->Rx_Ctl);
|
|
tc_writel(0, &tr->CAM_Ena);
|
|
(void)tc_readl(&tr->Miss_Cnt); /* Read to clear */
|
|
|
|
/* initialize internal SRAM */
|
|
tc_writel(DMA_TestMode, &tr->DMA_Ctl);
|
|
for (i = 0; i < 0x1000; i += 4) {
|
|
tc_writel(i, &tr->CAM_Adr);
|
|
tc_writel(0, &tr->CAM_Data);
|
|
}
|
|
tc_writel(0, &tr->DMA_Ctl);
|
|
}
|
|
|
|
static void tc35815_chip_init(struct net_device *dev)
|
|
{
|
|
struct tc35815_local *lp = dev->priv;
|
|
struct tc35815_regs __iomem *tr =
|
|
(struct tc35815_regs __iomem *)dev->base_addr;
|
|
unsigned long txctl = TX_CTL_CMD;
|
|
|
|
tc35815_phy_chip_init(dev);
|
|
|
|
/* load station address to CAM */
|
|
tc35815_set_cam_entry(dev, CAM_ENTRY_SOURCE, dev->dev_addr);
|
|
|
|
/* Enable CAM (broadcast and unicast) */
|
|
tc_writel(CAM_Ena_Bit(CAM_ENTRY_SOURCE), &tr->CAM_Ena);
|
|
tc_writel(CAM_CompEn | CAM_BroadAcc, &tr->CAM_Ctl);
|
|
|
|
/* Use DMA_RxAlign_2 to make IP header 4-byte aligned. */
|
|
if (HAVE_DMA_RXALIGN(lp))
|
|
tc_writel(DMA_BURST_SIZE | DMA_RxAlign_2, &tr->DMA_Ctl);
|
|
else
|
|
tc_writel(DMA_BURST_SIZE, &tr->DMA_Ctl);
|
|
#ifdef TC35815_USE_PACKEDBUFFER
|
|
tc_writel(RxFrag_EnPack | ETH_ZLEN, &tr->RxFragSize); /* Packing */
|
|
#else
|
|
tc_writel(ETH_ZLEN, &tr->RxFragSize);
|
|
#endif
|
|
tc_writel(0, &tr->TxPollCtr); /* Batch mode */
|
|
tc_writel(TX_THRESHOLD, &tr->TxThrsh);
|
|
tc_writel(INT_EN_CMD, &tr->Int_En);
|
|
|
|
/* set queues */
|
|
tc_writel(fd_virt_to_bus(lp, lp->rfd_base), &tr->FDA_Bas);
|
|
tc_writel((unsigned long)lp->rfd_limit - (unsigned long)lp->rfd_base,
|
|
&tr->FDA_Lim);
|
|
/*
|
|
* Activation method:
|
|
* First, enable the MAC Transmitter and the DMA Receive circuits.
|
|
* Then enable the DMA Transmitter and the MAC Receive circuits.
|
|
*/
|
|
tc_writel(fd_virt_to_bus(lp, lp->fbl_ptr), &tr->BLFrmPtr); /* start DMA receiver */
|
|
tc_writel(RX_CTL_CMD, &tr->Rx_Ctl); /* start MAC receiver */
|
|
|
|
/* start MAC transmitter */
|
|
#ifndef NO_CHECK_CARRIER
|
|
/* TX4939 does not have EnLCarr */
|
|
if (lp->boardtype == TC35815_TX4939)
|
|
txctl &= ~Tx_EnLCarr;
|
|
#ifdef WORKAROUND_LOSTCAR
|
|
/* WORKAROUND: ignore LostCrS in full duplex operation */
|
|
if ((lp->timer_state != asleep && lp->timer_state != lcheck) ||
|
|
lp->fullduplex)
|
|
txctl &= ~Tx_EnLCarr;
|
|
#endif
|
|
#endif /* !NO_CHECK_CARRIER */
|
|
#ifdef GATHER_TXINT
|
|
txctl &= ~Tx_EnComp; /* disable global tx completion int. */
|
|
#endif
|
|
tc_writel(txctl, &tr->Tx_Ctl);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int tc35815_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct tc35815_local *lp = dev->priv;
|
|
unsigned long flags;
|
|
|
|
pci_save_state(pdev);
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
netif_device_detach(dev);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
del_timer(&lp->timer); /* Kill if running */
|
|
tc35815_chip_reset(dev);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
pci_set_power_state(pdev, PCI_D3hot);
|
|
return 0;
|
|
}
|
|
|
|
static int tc35815_resume(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
struct tc35815_local *lp = dev->priv;
|
|
unsigned long flags;
|
|
|
|
pci_restore_state(pdev);
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
pci_set_power_state(pdev, PCI_D0);
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
tc35815_restart(dev);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
netif_device_attach(dev);
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct pci_driver tc35815_pci_driver = {
|
|
.name = MODNAME,
|
|
.id_table = tc35815_pci_tbl,
|
|
.probe = tc35815_init_one,
|
|
.remove = __devexit_p(tc35815_remove_one),
|
|
#ifdef CONFIG_PM
|
|
.suspend = tc35815_suspend,
|
|
.resume = tc35815_resume,
|
|
#endif
|
|
};
|
|
|
|
module_param_named(speed, options.speed, int, 0);
|
|
MODULE_PARM_DESC(speed, "0:auto, 10:10Mbps, 100:100Mbps");
|
|
module_param_named(duplex, options.duplex, int, 0);
|
|
MODULE_PARM_DESC(duplex, "0:auto, 1:half, 2:full");
|
|
module_param_named(doforce, options.doforce, int, 0);
|
|
MODULE_PARM_DESC(doforce, "try force link mode if auto-negotiation failed");
|
|
|
|
static int __init tc35815_init_module(void)
|
|
{
|
|
return pci_register_driver(&tc35815_pci_driver);
|
|
}
|
|
|
|
static void __exit tc35815_cleanup_module(void)
|
|
{
|
|
pci_unregister_driver(&tc35815_pci_driver);
|
|
}
|
|
|
|
module_init(tc35815_init_module);
|
|
module_exit(tc35815_cleanup_module);
|
|
|
|
MODULE_DESCRIPTION("TOSHIBA TC35815 PCI 10M/100M Ethernet driver");
|
|
MODULE_LICENSE("GPL");
|